Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

7 files changed, 702 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/Makefile b/qemu/roms/u-boot/board/freescale/mpc8568mds/Makefile
new file mode 100644
index 000000000..612fb5154
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright 2004-2007 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= mpc8568mds.o
+obj-y	+= bcsr.o
+obj-y	+= ddr.o
+obj-y	+= law.o
+obj-y	+= tlb.o
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.c b/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.c
new file mode 100644
index 000000000..4a6105cb1
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "bcsr.h"
+
+void enable_8568mds_duart(void)
+{
+	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
+	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
+	volatile u8 *bcsr		= (u8 *)(CONFIG_SYS_BCSR);
+
+	*duart_mux = 0x80000000;	/* Set the mux to Duart on PMUXCR */
+	*devices  = 0;			/* Enable all peripheral devices */
+	bcsr[5] |= 0x01;		/* Enable Duart in BCSR*/
+}
+
+void enable_8568mds_flash_write(void)
+{
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
+
+	bcsr[9] |= 0x01;
+}
+
+void disable_8568mds_flash_write(void)
+{
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
+
+	bcsr[9] &= ~(0x01);
+}
+
+void enable_8568mds_qe_mdio(void)
+{
+	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
+
+	bcsr[7] |= 0x01;
+}
+
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+void reset_8568mds_uccs(void)
+{
+	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
+
+	/* Turn off UCC1 & UCC2 */
+	out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
+	out_8(&bcsr[9], in_8(&bcsr[9]) & ~BCSR_UCC2_GETH_EN);
+
+	/* Mode is RGMII, all bits clear */
+	out_8(&bcsr[11], in_8(&bcsr[11]) & ~(BCSR_UCC1_MODE_MSK |
+					     BCSR_UCC2_MODE_MSK));
+
+	/* Turn UCC1 & UCC2 on */
+	out_8(&bcsr[8], in_8(&bcsr[8]) | BCSR_UCC1_GETH_EN);
+	out_8(&bcsr[9], in_8(&bcsr[9]) | BCSR_UCC2_GETH_EN);
+}
+#endif
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.h b/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.h
new file mode 100644
index 000000000..215534e6c
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/bcsr.h
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2007 Freescale Semiconductor.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __BCSR_H_
+#define __BCSR_H_
+
+#include <common.h>
+
+/* BCSR Bit definitions
+	* BCSR 0 *
+	0:3	ccb sys pll
+	4:6	cfg core pll
+	7	cfg boot seq
+
+	* BCSR 1 *
+	0:2	cfg rom lock
+	3:5	cfg host agent
+	6	PCI IO
+	7	cfg RIO size
+
+	* BCSR 2 *
+	0:4	QE PLL
+	5	QE clock
+	6	cfg PCI arbiter
+
+	* BCSR 3 *
+	0	TSEC1 reduce
+	1	TSEC2 reduce
+	2:3	TSEC1 protocol
+	4:5	TSEC2 protocol
+	6	PHY1 slave
+	7	PHY2 slave
+
+	* BCSR 4 *
+	4	clock enable
+	5	boot EPROM
+	6	GETH transactive reset
+	7	BRD write potect
+
+	* BCSR 5 *
+	1:3	Leds 1-3
+	4	UPC1 enable
+	5	UPC2 enable
+	6	UPC2 pos
+	7	RS232 enable
+
+	* BCSR 6 *
+	0	CFG ver 0
+	1	CFG ver 1
+	6	Register config led
+	7	Power on reset
+
+	* BCSR 7 *
+	2	board host mode indication
+	5	enable TSEC1 PHY
+	6	enable TSEC2 PHY
+
+	* BCSR 8 *
+	0	UCC GETH1 enable
+	1	UCC GMII enable
+	3	UCC TBI enable
+	5	UCC MII enable
+	7	Real time clock reset
+
+	* BCSR 9 *
+	0	UCC2 GETH enable
+	1	UCC2 GMII enable
+	3	UCC2 TBI enable
+	5	UCC2 MII enable
+	6	Ready only - indicate flash ready after burning
+	7	Flash write protect
+*/
+
+#define BCSR_UCC1_GETH_EN	(0x1 << 7)
+#define BCSR_UCC2_GETH_EN	(0x1 << 7)
+#define BCSR_UCC1_MODE_MSK	(0x3 << 4)
+#define BCSR_UCC2_MODE_MSK	(0x3 << 0)
+
+/*BCSR Utils functions*/
+
+void enable_8568mds_duart(void);
+void enable_8568mds_flash_write(void);
+void disable_8568mds_flash_write(void);
+void enable_8568mds_qe_mdio(void);
+
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+void reset_8568mds_uccs(void);
+#endif
+
+#endif	/* __BCSR_H_ */
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/ddr.c b/qemu/roms/u-boot/board/freescale/mpc8568mds/ddr.c
new file mode 100644
index 000000000..6db92ef2d
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/ddr.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	/*
+	 * Factors to consider for clock adjust:
+	 *	- number of chips on bus
+	 *	- position of slot
+	 *	- DDR1 vs. DDR2?
+	 *	- ???
+	 *
+	 * This needs to be determined on a board-by-board basis.
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	popts->clk_adjust = 6;
+
+	/*
+	 * Factors to consider for CPO:
+	 *	- frequency
+	 *	- ddr1 vs. ddr2
+	 */
+	popts->cpo_override = 10;
+
+	/*
+	 * Factors to consider for write data delay:
+	 *	- number of DIMMs
+	 *
+	 * 1 = 1/4 clock delay
+	 * 2 = 1/2 clock delay
+	 * 3 = 3/4 clock delay
+	 * 4 = 1   clock delay
+	 * 5 = 5/4 clock delay
+	 * 6 = 3/2 clock delay
+	 */
+	popts->write_data_delay = 3;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/law.c b/qemu/roms/u-boot/board/freescale/mpc8568mds/law.c
new file mode 100644
index 000000000..ae0696611
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/law.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2008, 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ *0)   0x0000_0000   0x7fff_ffff     DDR                     2G
+ *1)   0x8000_0000   0x9fff_ffff     PCI1 MEM                512MB
+ *2)   0xa000_0000   0xbfff_ffff     PCIe MEM                512MB
+ *-)   0xe000_0000   0xe00f_ffff     CCSR                    1M
+ *3)   0xe200_0000   0xe27f_ffff     PCI1 I/O                8M
+ *4)   0xe280_0000   0xe2ff_ffff     PCIe I/O                8M
+ *5)   0xc000_0000   0xdfff_ffff     SRIO                    512MB
+ *6.a) 0xf000_0000   0xf3ff_ffff     SDRAM                   64MB
+ *6.b) 0xf800_0000   0xf800_7fff     BCSR                    32KB
+ *6.c) 0xf800_8000   0xf800_ffff     PIB (CS4)		     32KB
+ *6.d) 0xf801_0000   0xf801_7fff     PIB (CS5)		     32KB
+ *6.e) 0xfe00_0000   0xffff_ffff     Flash                   32MB
+ *
+ *Notes:
+ *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *    If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ */
+
+struct law_entry law_table[] = {
+	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/mpc8568mds.c b/qemu/roms/u-boot/board/freescale/mpc8568mds/mpc8568mds.c
new file mode 100644
index 000000000..a8fdcb5f9
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/mpc8568mds.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#include "bcsr.h"
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* GETH1 */
+	{4, 10, 1, 0, 2}, /* TxD0 */
+	{4,  9, 1, 0, 2}, /* TxD1 */
+	{4,  8, 1, 0, 2}, /* TxD2 */
+	{4,  7, 1, 0, 2}, /* TxD3 */
+	{4, 23, 1, 0, 2}, /* TxD4 */
+	{4, 22, 1, 0, 2}, /* TxD5 */
+	{4, 21, 1, 0, 2}, /* TxD6 */
+	{4, 20, 1, 0, 2}, /* TxD7 */
+	{4, 15, 2, 0, 2}, /* RxD0 */
+	{4, 14, 2, 0, 2}, /* RxD1 */
+	{4, 13, 2, 0, 2}, /* RxD2 */
+	{4, 12, 2, 0, 2}, /* RxD3 */
+	{4, 29, 2, 0, 2}, /* RxD4 */
+	{4, 28, 2, 0, 2}, /* RxD5 */
+	{4, 27, 2, 0, 2}, /* RxD6 */
+	{4, 26, 2, 0, 2}, /* RxD7 */
+	{4, 11, 1, 0, 2}, /* TX_EN */
+	{4, 24, 1, 0, 2}, /* TX_ER */
+	{4, 16, 2, 0, 2}, /* RX_DV */
+	{4, 30, 2, 0, 2}, /* RX_ER */
+	{4, 17, 2, 0, 2}, /* RX_CLK */
+	{4, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+
+	/* GETH2 */
+	{5, 10, 1, 0, 2}, /* TxD0 */
+	{5,  9, 1, 0, 2}, /* TxD1 */
+	{5,  8, 1, 0, 2}, /* TxD2 */
+	{5,  7, 1, 0, 2}, /* TxD3 */
+	{5, 23, 1, 0, 2}, /* TxD4 */
+	{5, 22, 1, 0, 2}, /* TxD5 */
+	{5, 21, 1, 0, 2}, /* TxD6 */
+	{5, 20, 1, 0, 2}, /* TxD7 */
+	{5, 15, 2, 0, 2}, /* RxD0 */
+	{5, 14, 2, 0, 2}, /* RxD1 */
+	{5, 13, 2, 0, 2}, /* RxD2 */
+	{5, 12, 2, 0, 2}, /* RxD3 */
+	{5, 29, 2, 0, 2}, /* RxD4 */
+	{5, 28, 2, 0, 2}, /* RxD5 */
+	{5, 27, 2, 0, 3}, /* RxD6 */
+	{5, 26, 2, 0, 2}, /* RxD7 */
+	{5, 11, 1, 0, 2}, /* TX_EN */
+	{5, 24, 1, 0, 2}, /* TX_ER */
+	{5, 16, 2, 0, 2}, /* RX_DV */
+	{5, 30, 2, 0, 2}, /* RX_ER */
+	{5, 17, 2, 0, 2}, /* RX_CLK */
+	{5, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+	{4,  6, 3, 0, 2}, /* MDIO */
+	{4,  5, 1, 0, 2}, /* MDC */
+
+	/* UART1 */
+	{2, 0, 1, 0, 2}, /* UART_SOUT1 */
+	{2, 1, 1, 0, 2}, /* UART_RTS1 */
+	{2, 2, 2, 0, 2}, /* UART_CTS1 */
+	{2, 3, 2, 0, 2}, /* UART_SIN1 */
+
+	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+void local_bus_init(void);
+
+int board_early_init_f (void)
+{
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	enable_8568mds_duart();
+	enable_8568mds_flash_write();
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+	reset_8568mds_uccs();
+#endif
+#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
+	enable_8568mds_qe_mdio();
+#endif
+
+#ifdef CONFIG_SYS_I2C2_OFFSET
+	/* Enable I2C2_SCL and I2C2_SDA */
+	volatile struct par_io *port_c;
+	port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
+	port_c->cpdir2 |= 0x0f000000;
+	port_c->cppar2 &= ~0x0f000000;
+	port_c->cppar2 |= 0x0a000000;
+#endif
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	printf ("Board: 8568 MDS\n");
+
+	return 0;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+	uint clkdiv;
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
+
+	gur->lbiuiplldcr1 = 0x00078080;
+	if (clkdiv == 16) {
+		gur->lbiuiplldcr0 = 0x7c0f1bf0;
+	} else if (clkdiv == 8) {
+		gur->lbiuiplldcr0 = 0x6c0f1bf0;
+	} else if (clkdiv == 4) {
+		gur->lbiuiplldcr0 = 0x5c0f1bf0;
+	}
+
+	lbc->lcrr |= 0x00030000;
+
+	asm("sync;isync;msync");
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void lbc_sdram_init(void)
+{
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+
+	uint idx;
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
+	uint lsdmr_common;
+
+	puts("LBC SDRAM: ");
+	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+		   "\n       ");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
+	asm("msync");
+
+	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
+	asm("msync");
+
+	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
+	asm("msync");
+
+	/*
+	 * MPC8568 uses "new" 15-16 style addressing.
+	 */
+	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+	lsdmr_common |= LSDMR_BSMA1516;
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(100);
+
+	/*
+	 * Issue NORMAL OP command.
+	 */
+	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CONFIG_PCI)
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8568mds_config_table[] = {
+	{
+	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	 pci_cfgfunc_config_device,
+	 {PCI_ENET0_IOADDR,
+	  PCI_ENET0_MEMADDR,
+	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
+	 },
+	{}
+};
+#endif
+
+static struct pci_controller pci1_hose;
+#endif	/* CONFIG_PCI */
+
+/*
+ * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
+ */
+void
+pib_init(void)
+{
+	u8 val8, orig_i2c_bus;
+	/*
+	 * Assign PIB PMC2/3 to PCI bus
+	 */
+
+	/*switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	val8 = 0x00;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+	val8 = 0xf9;
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+
+	asm("eieio");
+	i2c_set_bus_num(orig_i2c_bus);
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int first_free_busno = 0;
+#ifdef CONFIG_PCI1
+	struct fsl_pci_info pci_info;
+	u32 devdisr, pordevsr, io_sel;
+	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+
+	devdisr = in_be32(&gur->devdisr);
+	pordevsr = in_be32(&gur->pordevsr);
+	porpllsr = in_be32(&gur->porpllsr);
+	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+
+	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
+
+	pci_speed = 66666000;
+	pci_32 = 1;
+	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		SET_STD_PCI_INFO(pci_info, 1);
+		set_next_law(pci_info.mem_phys,
+			law_size_bits(pci_info.mem_size), pci_info.law);
+		set_next_law(pci_info.io_phys,
+			law_size_bits(pci_info.io_size), pci_info.law);
+
+		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
+		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter",
+			pci_info.regs);
+
+#ifndef CONFIG_PCI_PNP
+		pci1_hose.config_table = pci_mpc8568mds_config_table;
+#endif
+		first_free_busno = fsl_pci_init_port(&pci_info,
+					&pci1_hose, first_free_busno);
+	} else {
+		printf("PCI: disabled\n");
+	}
+
+	puts("\n");
+#else
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
+#endif
+
+	fsl_pcie_init_board(first_free_busno);
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+	FT_FSL_PCI_SETUP;
+}
+#endif
diff --git a/qemu/roms/u-boot/board/freescale/mpc8568mds/tlb.c b/qemu/roms/u-boot/board/freescale/mpc8568mds/tlb.c
new file mode 100644
index 000000000..b5e2fec1f
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc8568mds/tlb.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 Initializations */
+	/*
+	 * TLBe 0:	16M	Non-cacheable, guarded
+	 * 0xff000000	16M	FLASH (upper half)
+	 * Out of reset this entry is only 4K.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, CONFIG_SYS_FLASH_BASE + 0x1000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_16M, 1),
+
+	/*
+	 * TLBe 1:	16M	Non-cacheable, guarded
+	 * 0xfe000000	16M	FLASH (lower half)
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/*
+	 * TLBe 2:	1G	Non-cacheable, guarded
+	 * 0x80000000	512M	PCI1 MEM
+	 * 0xa0000000	512M	PCIe MEM
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_1G, 1),
+
+	/*
+	 * TLBe 3:	64M	Non-cacheable, guarded
+	 * 0xe000_0000	1M	CCSRBAR
+	 * 0xe200_0000	8M	PCI1 IO
+	 * 0xe280_0000	8M	PCIe IO
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLBe 4:	64M	Cacheable, non-guarded
+	 * 0xf000_0000	64M	LBC SDRAM
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 4, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLBe 5:	256K	Non-cacheable, guarded
+	 * 0xf8000000	32K BCSR
+	 * 0xf8008000	32K PIB (CS4)
+	 * 0xf8010000	32K PIB (CS5)
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256K, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);