Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 101 deletions

diff --git a/qemu/roms/u-boot/board/freescale/mpc8349emds/ddr.c b/qemu/roms/u-boot/board/freescale/mpc8349emds/ddr.c
deleted file mode 100644
index aae003d12..000000000
--- a/qemu/roms/u-boot/board/freescale/mpc8349emds/ddr.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 clk_adjust;
-	u32 cpo;
-	u32 write_data_delay;
-	u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi|  clk| cpo|wrdata|2T
-	 * ranks| mhz|adjst|    | delay|
-	 */
-	{2,  300,    4,   4,    2,  0},
-	{2,  365,    4,   6,    2,  0},
-	{2,  450,    4,   7,    2,  0},
-	{2,  850,    4,  31,    2,  0},
-	{1,  300,    4,   4,    2,  0},
-	{1,  365,    4,   6,    2,  0},
-	{1,  450,    4,   7,    2,  0},
-	{1,  850,    4,  31,    2,  0},
-	{}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	unsigned int i;
-	ulong ddr_freq;
-
-	if (ctrl_num != 0)	/* we have only one controller */
-		return;
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (pdimm[i].n_ranks)
-			break;
-	}
-	if (i >= CONFIG_DIMM_SLOTS_PER_CTLR)	/* no DIMM */
-		return;
-
-	pbsp = udimm0;
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks ==  pdimm[i].n_ranks) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->cpo_override = pbsp->cpo;
-				popts->write_data_delay =
-					pbsp->write_data_delay;
-				popts->twot_en = pbsp->force_2t;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found "
-			"for data rate %lu MT/s!\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->cpo_override = pbsp_highest->cpo;
-		popts->write_data_delay = pbsp_highest->write_data_delay;
-		popts->twot_en = pbsp_highest->force_2t;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-
-found:
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	popts->dqs_config = 0;	/* only true DQS signal is used on board */
-}