Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

6 files changed, 590 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/esd/vme8349/Makefile b/qemu/roms/u-boot/board/esd/vme8349/Makefile
new file mode 100644
index 000000000..fa11d5d10
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/Makefile
@@ -0,0 +1,11 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (c) 2009 esd gmbh hannover germany.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += vme8349.o caddy.o
+obj-$(CONFIG_PCI) += pci.o
diff --git a/qemu/roms/u-boot/board/esd/vme8349/caddy.c b/qemu/roms/u-boot/board/esd/vme8349/caddy.c
new file mode 100644
index 000000000..cd56bed99
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/caddy.c
@@ -0,0 +1,177 @@
+/*
+ * caddy.c -- esd VME8349 support for "missing" access modes in TSI148.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <pci.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+
+#include "caddy.h"
+
+static struct caddy_interface *caddy_interface;
+
+void generate_answer(struct caddy_cmd *cmd, uint32_t status, uint32_t *result)
+{
+	struct caddy_answer *answer;
+	uint32_t ptr;
+
+	answer = &caddy_interface->answer[caddy_interface->answer_in];
+	memset((void *)answer, 0, sizeof(struct caddy_answer));
+	answer->answer = cmd->cmd;
+	answer->issue = cmd->issue;
+	answer->status = status;
+	memcpy(answer->par, result, 5 * sizeof(result[0]));
+	ptr = caddy_interface->answer_in + 1;
+	ptr = ptr & (ANSWER_SIZE - 1);
+	if (ptr != caddy_interface->answer_out)
+		caddy_interface->answer_in = ptr;
+}
+
+int do_caddy(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	unsigned long base_addr;
+	uint32_t ptr;
+	struct caddy_cmd *caddy_cmd;
+	uint32_t result[5];
+	uint16_t data16;
+	uint8_t data8;
+	uint32_t status;
+	pci_dev_t dev;
+	void *pci_ptr;
+
+	if (argc < 2) {
+		puts("Missing parameter\n");
+		return 1;
+	}
+
+	base_addr = simple_strtoul(argv[1], NULL, 16);
+	caddy_interface = (struct caddy_interface *) base_addr;
+
+	memset((void *)caddy_interface, 0, sizeof(struct caddy_interface));
+	memcpy((void *)&caddy_interface->magic[0], &CADDY_MAGIC, 16);
+
+	while (ctrlc() == 0) {
+		if (caddy_interface->cmd_in != caddy_interface->cmd_out) {
+			memset(result, 0, 5 * sizeof(result[0]));
+			status = 0;
+			caddy_cmd = &caddy_interface->cmd[caddy_interface->cmd_out];
+			pci_ptr = (void *)CONFIG_SYS_PCI1_IO_PHYS +
+				(caddy_cmd->addr & 0x001fffff);
+
+			switch (caddy_cmd->cmd) {
+			case CADDY_CMD_IO_READ_8:
+				result[0] = in_8(pci_ptr);
+				break;
+
+			case CADDY_CMD_IO_READ_16:
+				result[0] = in_be16(pci_ptr);
+				break;
+
+			case CADDY_CMD_IO_READ_32:
+				result[0] = in_be32(pci_ptr);
+				break;
+
+			case CADDY_CMD_IO_WRITE_8:
+				data8 = caddy_cmd->par[0] & 0x000000ff;
+				out_8(pci_ptr, data8);
+				break;
+
+			case CADDY_CMD_IO_WRITE_16:
+				data16 = caddy_cmd->par[0] & 0x0000ffff;
+				out_be16(pci_ptr, data16);
+				break;
+
+			case CADDY_CMD_IO_WRITE_32:
+				out_be32(pci_ptr, caddy_cmd->par[0]);
+				break;
+
+			case CADDY_CMD_CONFIG_READ_8:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				status = pci_read_config_byte(dev,
+							      caddy_cmd->addr,
+							      &data8);
+				result[0] = data8;
+				break;
+
+			case CADDY_CMD_CONFIG_READ_16:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				status = pci_read_config_word(dev,
+							      caddy_cmd->addr,
+							      &data16);
+				result[0] = data16;
+				break;
+
+			case CADDY_CMD_CONFIG_READ_32:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				status = pci_read_config_dword(dev,
+							       caddy_cmd->addr,
+							       &result[0]);
+				break;
+
+			case CADDY_CMD_CONFIG_WRITE_8:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				data8 = caddy_cmd->par[3] & 0x000000ff;
+				status = pci_write_config_byte(dev,
+							       caddy_cmd->addr,
+							       data8);
+				break;
+
+			case CADDY_CMD_CONFIG_WRITE_16:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				data16 = caddy_cmd->par[3] & 0x0000ffff;
+				status = pci_write_config_word(dev,
+							       caddy_cmd->addr,
+							       data16);
+				break;
+
+			case CADDY_CMD_CONFIG_WRITE_32:
+				dev = PCI_BDF(caddy_cmd->par[0],
+					      caddy_cmd->par[1],
+					      caddy_cmd->par[2]);
+				status = pci_write_config_dword(dev,
+								caddy_cmd->addr,
+								caddy_cmd->par[3]);
+				break;
+
+			default:
+				status = 0xffffffff;
+				break;
+			}
+
+			generate_answer(caddy_cmd, status, &result[0]);
+
+			ptr = caddy_interface->cmd_out + 1;
+			ptr = ptr & (CMD_SIZE - 1);
+			caddy_interface->cmd_out = ptr;
+		}
+
+		caddy_interface->heartbeat++;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	caddy,	2,	0,	do_caddy,
+	"Start Caddy server.",
+	"Start Caddy server with Data structure a given addr\n"
+	);
diff --git a/qemu/roms/u-boot/board/esd/vme8349/caddy.h b/qemu/roms/u-boot/board/esd/vme8349/caddy.h
new file mode 100644
index 000000000..989f3c72a
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/caddy.h
@@ -0,0 +1,60 @@
+/*
+ * caddy.c -- esd VME8349 support for "missing" access modes in TSI148.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CADDY_H__
+#define __CADDY_H__
+
+#define CMD_SIZE	1024
+#define ANSWER_SIZE	1024
+#define CADDY_MAGIC	"esd vme8349 V1.0"
+
+enum caddy_cmds {
+	CADDY_CMD_IO_READ_8,
+	CADDY_CMD_IO_READ_16,
+	CADDY_CMD_IO_READ_32,
+	CADDY_CMD_IO_WRITE_8,
+	CADDY_CMD_IO_WRITE_16,
+	CADDY_CMD_IO_WRITE_32,
+	CADDY_CMD_CONFIG_READ_8,
+	CADDY_CMD_CONFIG_READ_16,
+	CADDY_CMD_CONFIG_READ_32,
+	CADDY_CMD_CONFIG_WRITE_8,
+	CADDY_CMD_CONFIG_WRITE_16,
+	CADDY_CMD_CONFIG_WRITE_32,
+};
+
+struct caddy_cmd {
+	uint32_t cmd;
+	uint32_t issue;
+	uint32_t addr;
+	uint32_t par[5];
+};
+
+struct caddy_answer {
+	uint32_t answer;
+	uint32_t issue;
+	uint32_t status;
+	uint32_t par[5];
+};
+
+struct caddy_interface {
+	uint8_t  magic[16];
+	uint32_t cmd_in;
+	uint32_t cmd_out;
+	uint32_t heartbeat;
+	uint32_t reserved1;
+	struct caddy_cmd cmd[CMD_SIZE];
+	uint32_t answer_in;
+	uint32_t answer_out;
+	uint32_t reserved2;
+	uint32_t reserved3;
+	struct caddy_answer answer[CMD_SIZE];
+};
+
+#endif /* of __CADDY_H__ */
diff --git a/qemu/roms/u-boot/board/esd/vme8349/pci.c b/qemu/roms/u-boot/board/esd/vme8349/pci.c
new file mode 100644
index 000000000..4d3b21ddf
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/pci.c
@@ -0,0 +1,119 @@
+/*
+ * pci.c -- esd VME8349 PCI board support.
+ * Copyright (c) 2006 Wind River Systems, Inc.
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * Based on MPC8349 PCI support but w/o PIB related code.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/fsl_i2c.h>
+#include "vme8349pin.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_region pci1_regions[] = {
+	{
+		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+		size: CONFIG_SYS_PCI1_MEM_SIZE,
+		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+	},
+	{
+		bus_start: CONFIG_SYS_PCI1_IO_BASE,
+		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+		size: CONFIG_SYS_PCI1_IO_SIZE,
+		flags: PCI_REGION_IO
+	},
+	{
+		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+		size: CONFIG_SYS_PCI1_MMIO_SIZE,
+		flags: PCI_REGION_MEM
+	},
+};
+
+/*
+ * pci_init_board()
+ *
+ * NOTICE: PCI2 is not supported. There is only one
+ * physical PCI slot on the board.
+ *
+ */
+void
+pci_init_board(void)
+{
+	volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+	struct pci_region *reg[] = { pci1_regions };
+	u8 reg8;
+	int monarch = 0;
+
+	i2c_set_bus_num(1);
+	/* Read the PCI_M66EN jumper setting */
+	if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &reg8, 1) == 0) ||
+	    (i2c_read(0x38                     , 0, 0, &reg8, 1) == 0)) {
+		if (reg8 & 0x40) {
+			clk->occr = 0xff000000;	/* 66 MHz PCI */
+			printf("PCI:   66MHz\n");
+		} else {
+			clk->occr = 0xffff0003;	/* 33 MHz PCI */
+			printf("PCI:   33MHz\n");
+		}
+		if (((reg8 & 0x01) == 0) || ((reg8 & 0x02) == 0))
+			monarch = 1;
+	} else {
+		clk->occr = 0xffff0003;	/* 33 MHz PCI */
+		printf("PCI:   33MHz (I2C read failed)\n");
+	}
+	udelay(2000);
+
+	/*
+	 * Assert/deassert VME reset
+	 */
+	clrsetbits_be32(&immr->gpio[1].dat,
+			GPIO2_TSI_POWERUP_RESET_N | GPIO2_TSI_PLL_RESET_N,
+			GPIO2_VME_RESET_N  | GPIO2_L_RESET_EN_N);
+	setbits_be32(&immr->gpio[1].dir, GPIO2_TSI_PLL_RESET_N |
+		     GPIO2_TSI_POWERUP_RESET_N |
+		     GPIO2_VME_RESET_N |
+		     GPIO2_L_RESET_EN_N);
+	clrbits_be32(&immr->gpio[1].dir, GPIO2_V_SCON);
+	udelay(200);
+	setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_PLL_RESET_N);
+	udelay(200);
+	setbits_be32(&immr->gpio[1].dat, GPIO2_TSI_POWERUP_RESET_N);
+	udelay(600000);
+	clrbits_be32(&immr->gpio[1].dat, GPIO2_L_RESET_EN_N);
+
+	/* Configure PCI Local Access Windows */
+	pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+
+	pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
+
+	udelay(2000);
+
+	if (monarch == 0) {
+		mpc83xx_pci_init(1, reg);
+	} else {
+		/*
+		 * Release PCI RST Output signal
+		 */
+		out_be32(&immr->pci_ctrl[0].gcr, 0);
+		udelay(2000);
+		out_be32(&immr->pci_ctrl[0].gcr, 1);
+	}
+}
diff --git a/qemu/roms/u-boot/board/esd/vme8349/vme8349.c b/qemu/roms/u-boot/board/esd/vme8349/vme8349.c
new file mode 100644
index 000000000..01365dcbd
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/vme8349.c
@@ -0,0 +1,204 @@
+/*
+ * vme8349.c -- esd VME8349 board support
+ *
+ * Copyright (c) 2008-2009 esd gmbh.
+ *
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <spd.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <netdev.h>
+
+void ddr_enable_ecc(unsigned int dram_size);
+
+phys_size_t initdram(int board_type)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = 0;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+		return -1;
+
+	/* DDR SDRAM - Main memory */
+	im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
+
+	msize = spd_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+
+	/* Now check memory size (after ECC is initialized) */
+	msize = get_ram_size(0, msize);
+
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+#ifdef VME_CADDY2
+	puts("Board: esd VME-CADDY/2\n");
+#else
+	puts("Board: esd VME-CPU/8349\n");
+#endif
+
+	return 0;
+}
+
+#ifdef VME_CADDY2
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+}
+#endif
+
+int misc_init_r()
+{
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+	clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);
+
+	return 0;
+}
+
+/*
+ * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
+ * and VME-CADDY/2) have different SDRAM configurations.
+ */
+#ifdef VME_CADDY2
+#define SMALL_RAM	0xff
+#define LARGE_RAM	0x00
+#else
+#define SMALL_RAM	0x00
+#define LARGE_RAM	0xff
+#endif
+
+#define SPD_VAL(a, b)	(((a) & SMALL_RAM) | ((b) & LARGE_RAM))
+
+static spd_eeprom_t default_spd_eeprom = {
+	SPD_VAL(0x80, 0x80),	/* 00 use 128 Bytes */
+	SPD_VAL(0x07, 0x07),	/* 01 use 128 Bytes */
+	SPD_MEMTYPE_DDR2,	/* 02 type is DDR2 */
+	SPD_VAL(0x0d, 0x0d),	/* 03 rows: 13 */
+	SPD_VAL(0x09, 0x0a),	/* 04 cols:  9 / 10 */
+	SPD_VAL(0x00, 0x00),	/* 05 */
+	SPD_VAL(0x40, 0x40),	/* 06 */
+	SPD_VAL(0x00, 0x00),	/* 07 */
+	SPD_VAL(0x05, 0x05),	/* 08 */
+	SPD_VAL(0x30, 0x30),	/* 09 */
+	SPD_VAL(0x45, 0x45),	/* 10 */
+	SPD_VAL(0x02, 0x02),	/* 11 ecc used */
+	SPD_VAL(0x82, 0x82),	/* 12 */
+	SPD_VAL(0x10, 0x10),	/* 13 */
+	SPD_VAL(0x08, 0x08),	/* 14 */
+	SPD_VAL(0x00, 0x00),	/* 15 */
+	SPD_VAL(0x0c, 0x0c),	/* 16 */
+	SPD_VAL(0x04, 0x08),	/* 17 banks: 4 / 8 */
+	SPD_VAL(0x38, 0x38),	/* 18 */
+	SPD_VAL(0x00, 0x00),	/* 19 */
+	SPD_VAL(0x02, 0x02),	/* 20 */
+	SPD_VAL(0x00, 0x00),	/* 21 */
+	SPD_VAL(0x03, 0x03),	/* 22 */
+	SPD_VAL(0x3d, 0x3d),	/* 23 */
+	SPD_VAL(0x45, 0x45),	/* 24 */
+	SPD_VAL(0x50, 0x50),	/* 25 */
+	SPD_VAL(0x45, 0x45),	/* 26 */
+	SPD_VAL(0x3c, 0x3c),	/* 27 */
+	SPD_VAL(0x28, 0x28),	/* 28 */
+	SPD_VAL(0x3c, 0x3c),	/* 29 */
+	SPD_VAL(0x2d, 0x2d),	/* 30 */
+	SPD_VAL(0x20, 0x80),	/* 31 */
+	SPD_VAL(0x20, 0x20),	/* 32 */
+	SPD_VAL(0x27, 0x27),	/* 33 */
+	SPD_VAL(0x10, 0x10),	/* 34 */
+	SPD_VAL(0x17, 0x17),	/* 35 */
+	SPD_VAL(0x3c, 0x3c),	/* 36 */
+	SPD_VAL(0x1e, 0x1e),	/* 37 */
+	SPD_VAL(0x1e, 0x1e),	/* 38 */
+	SPD_VAL(0x00, 0x00),	/* 39 */
+	SPD_VAL(0x00, 0x06),	/* 40 */
+	SPD_VAL(0x37, 0x37),	/* 41 */
+	SPD_VAL(0x4b, 0x7f),	/* 42 */
+	SPD_VAL(0x80, 0x80),	/* 43 */
+	SPD_VAL(0x18, 0x18),	/* 44 */
+	SPD_VAL(0x22, 0x22),	/* 45 */
+	SPD_VAL(0x00, 0x00),	/* 46 */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+	SPD_VAL(0x10, 0x10),	/* 62 */
+	SPD_VAL(0x7e, 0x1d),	/* 63 */
+	{ 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
+	SPD_VAL(0x00, 0x00),	/* 72 */
+#ifdef VME_CADDY2
+	{ "vme-caddy/2 ram   " }
+#else
+	{ "vme-cpu/2 ram     " }
+#endif
+};
+
+int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+	int old_bus = i2c_get_bus_num();
+	unsigned int l, sum;
+	int valid = 0;
+
+	i2c_set_bus_num(0);
+
+	if (i2c_read(chip, addr, alen, buffer, len) == 0)
+		if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
+			sum = 0;
+			for (l = 0; l < 63; l++)
+				sum = (sum + buffer[l]) & 0xff;
+			if (sum == buffer[63])
+				valid = 1;
+			else
+				printf("Invalid checksum in EEPROM %02x %02x\n",
+				       sum, buffer[63]);
+		}
+
+	if (valid == 0) {
+		memcpy(buffer, (void *)&default_spd_eeprom, len);
+		sum = 0;
+		for (l = 0; l < 63; l++)
+			sum = (sum + buffer[l]) & 0xff;
+		if (sum != buffer[63])
+			printf("Invalid checksum in FLASH %02x %02x\n",
+			       sum, buffer[63]);
+		buffer[63] = sum;
+	}
+
+	i2c_set_bus_num(old_bus);
+
+	return 0;
+}
diff --git a/qemu/roms/u-boot/board/esd/vme8349/vme8349pin.h b/qemu/roms/u-boot/board/esd/vme8349/vme8349pin.h
new file mode 100644
index 000000000..fcf6c59bd
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/vme8349/vme8349pin.h
@@ -0,0 +1,19 @@
+/*
+ * vme8349pin.h -- esd VME8349 MPC8349 I/O pin definition.
+ * Copyright (c) 2009 esd gmbh.
+ *
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __VME8349PIN_H__
+#define __VME8349PIN_H__
+
+#define GPIO2_V_SCON		0x80000000 /* In:  from tsi148 1: is syscon */
+#define GPIO2_VME_RESET_N	0x20000000 /* Out: to tsi148                */
+#define GPIO2_TSI_PLL_RESET_N	0x08000000 /* Out: to tsi148                */
+#define GPIO2_TSI_POWERUP_RESET_N 0x00800000 /* Out: to tsi148              */
+#define GPIO2_L_RESET_EN_N	0x00100000 /* Out: 0:vme can assert cpu lrst*/
+
+#endif /* of ifndef __VME8349PIN_H__ */