Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

3 files changed, 166 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/davinci/dm355evm/Makefile b/qemu/roms/u-boot/board/davinci/dm355evm/Makefile
new file mode 100644
index 000000000..bcb7e6fed
--- /dev/null
+++ b/qemu/roms/u-boot/board/davinci/dm355evm/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= dm355evm.o
diff --git a/qemu/roms/u-boot/board/davinci/dm355evm/config.mk b/qemu/roms/u-boot/board/davinci/dm355evm/config.mk
new file mode 100644
index 000000000..9a063000c
--- /dev/null
+++ b/qemu/roms/u-boot/board/davinci/dm355evm/config.mk
@@ -0,0 +1,11 @@
+#
+# Spectrum Digital DM355 EVM board
+#	dm355evm board has 1 bank of 128 MB DDR RAM
+#	Physical Address: 8000'0000 to 8800'0000
+#
+# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+CONFIG_SYS_TEXT_BASE = 0x81080000
diff --git a/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c b/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c
new file mode 100644
index 000000000..10422b226
--- /dev/null
+++ b/qemu/roms/u-boot/board/davinci/dm355evm/dm355evm.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2009 David Brownell
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emif_defs.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/davinci_misc.h>
+#include <net.h>
+#include <netdev.h>
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * With the DM355 EVM, u-boot is *always* a third stage loader,
+ * unless a JTAG debugger handles the first two stages:
+ *
+ *   - 1st stage is ROM Boot Loader (RBL), which searches for a
+ *     second stage loader in one of three places based on SW7:
+ *     NAND (with MMC/SD fallback), MMC/SD, or UART.
+ *
+ *   - 2nd stage is User Boot Loader (UBL), using at most 30KB
+ *     of on-chip SRAM, responsible for lowlevel init, and for
+ *     loading the third stage loader into DRAM.
+ *
+ *   - 3rd stage, that's us!
+ */
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM355_EVM;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	/* We expect the UBL to have handled "lowlevel init", which
+	 * involves setting up at least:
+	 *  - clocks
+	 *      + PLL1 (for ARM and peripherals) and PLL2 (for DDR)
+	 *      + clock divisors for those PLLs
+	 *      + LPSC_DDR module enabled
+	 *      + LPSC_TIMER0 module (still) enabled
+	 *  - EMIF
+	 *      + DDR init and timings
+	 *      + AEMIF timings (for NAND and DM9000)
+	 *  - pinmux
+	 *
+	 * Some of that is repeated here, mostly as a precaution.
+	 */
+
+	/* AEMIF:  Some "address" lines are available as GPIOs.  A3..A13
+	 * could be too if we used A12 as a GPIO during NAND chipselect
+	 * (and Linux did too), letting us control the LED on A7/GPIO61.
+	 */
+	REG(PINMUX2) = 0x0c08;
+
+	/* UART0 may still be in SyncReset if we didn't boot from UART */
+	davinci_enable_uart0();
+
+	/* EDMA may be in SyncReset too; turn it on, Linux won't (yet) */
+	lpsc_on(DAVINCI_LPSC_TPCC);
+	lpsc_on(DAVINCI_LPSC_TPTC0);
+	lpsc_on(DAVINCI_LPSC_TPTC1);
+
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+
+static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
+{
+	struct nand_chip	*this = mtd->priv;
+	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
+	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
+
+	if (chip == 1) {
+		__set_bit(14, &wbase);
+		__set_bit(14, &rbase);
+	} else {
+		__clear_bit(14, &wbase);
+		__clear_bit(14, &rbase);
+	}
+	this->IO_ADDR_W = (void *)wbase;
+	this->IO_ADDR_R = (void *)rbase;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	davinci_nand_init(nand);
+	nand->select_chip = nand_dm355evm_select_chip;
+	return 0;
+}
+
+#endif
+
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+	.input_clk	= 108000000,
+	.host_caps	= MMC_MODE_4BIT,
+	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.version	= MMC_CTLR_VERSION_1,
+};
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+static struct davinci_mmc mmc_sd1 = {
+	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
+	.input_clk	= 108000000,
+	.host_caps	= MMC_MODE_4BIT,
+	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.version	= MMC_CTLR_VERSION_1,
+};
+#endif
+
+int board_mmc_init(bd_t *bis)
+{
+	int err;
+
+	/* Add slot-0 to mmc subsystem */
+	err = davinci_mmc_init(bis, &mmc_sd0);
+	if (err)
+		return err;
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+	/* Add slot-1 to mmc subsystem */
+	err = davinci_mmc_init(bis, &mmc_sd1);
+#endif
+
+	return err;
+}
+#endif