Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

4 files changed, 973 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/cpu87/Makefile b/qemu/roms/u-boot/board/cpu87/Makefile
new file mode 100644
index 000000000..0d59bbbb3
--- /dev/null
+++ b/qemu/roms/u-boot/board/cpu87/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	= cpu87.o flash.o
diff --git a/qemu/roms/u-boot/board/cpu87/cpu87.c b/qemu/roms/u-boot/board/cpu87/cpu87.c
new file mode 100644
index 000000000..01f90d2eb
--- /dev/null
+++ b/qemu/roms/u-boot/board/cpu87/cpu87.c
@@ -0,0 +1,330 @@
+/*
+ * (C) Copyright 2001-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+#include "cpu87.h"
+#include <pci.h>
+#include <netdev.h>
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {	/*	      conf ppar psor pdir podr pdat */
+	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
+	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
+	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
+	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
+	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
+	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
+	/* PA25 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MII MDIO */
+	/* PA24 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MII MDC */
+	/* PA23 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 MII MDIO */
+	/* PA22 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 MII MDC */
+	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
+	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
+	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
+	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
+	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
+	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1] */
+	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
+	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
+	/* PA13 */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MII TXSL1 */
+	/* PA12 */ {   1,   0,   0,   1,   0,   1   }, /* FCC2 MII TXSL0 */
+	/* PA11 */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 MII TXSL1 */
+	/* PA10 */ {   1,   0,   0,   1,   0,   1   }, /* FCC1 MII TXSL0 */
+	/* PA9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC2 TXD */
+	/* PA8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC2 RXD */
+	/* PA7  */ {   0,   0,   0,   0,   0,   0   }, /* PA7 */
+	/* PA6  */ {   1,   0,   0,   1,   0,   1   }, /* FCC2 MII PAUSE */
+	/* PA5  */ {   1,   0,   0,   1,   0,   1   }, /* FCC1 MII PAUSE */
+	/* PA4  */ {   1,   0,   0,   1,   0,   0   }, /* FCC2 MII PWRDN */
+	/* PA3  */ {   1,   0,   0,   1,   0,   0   }, /* FCC1 MII PWRDN */
+	/* PA2  */ {   0,   0,   0,   0,   0,   0   }, /* PA2 */
+	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FCC2 MII MDINT */
+	/* PA0  */ {   1,   0,   0,   1,   0,   0   }  /* FCC1 MII MDINT */
+    },
+
+    /* Port B configuration */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   0,   0,   0,   0,   0   }, /* PB17 */
+	/* PB16 */ {   0,   0,   0,   0,   0,   0   }, /* PB16 */
+	/* PB15 */ {   0,   0,   0,   0,   0,   0   }, /* PB15 */
+	/* PB14 */ {   0,   0,   0,   0,   0,   0   }, /* PB14 */
+	/* PB13 */ {   0,   0,   0,   0,   0,   0   }, /* PB13 */
+	/* PB12 */ {   0,   0,   0,   0,   0,   0   }, /* PB12 */
+	/* PB11 */ {   0,   0,   0,   0,   0,   0   }, /* PB11 */
+	/* PB10 */ {   0,   0,   0,   0,   0,   0   }, /* PB10 */
+	/* PB9  */ {   0,   0,   0,   0,   0,   0   }, /* PB9 */
+	/* PB8  */ {   0,   0,   0,   0,   0,   0   }, /* PB8 */
+	/* PB7  */ {   0,   0,   0,   0,   0,   0   }, /* PB7 */
+	/* PB6  */ {   0,   0,   0,   0,   0,   0   }, /* PB6 */
+	/* PB5  */ {   0,   0,   0,   0,   0,   0   }, /* PB5 */
+	/* PB4  */ {   0,   0,   0,   0,   0,   0   }, /* PB4 */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* PB3 */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* PB2 */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* PB1 */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* PB0 */
+    },
+
+    /* Port C */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   0,   0,   0   }, /* PC31 */
+	/* PC30 */ {   0,   0,   0,   0,   0,   0   }, /* PC30 */
+	/* PC29 */ {   1,   0,   0,   0,   0,   0   }, /* SCC1 CTS */
+	/* PC28 */ {   1,   0,   0,   0,   0,   0   }, /* SCC2 CTS */
+	/* PC27 */ {   0,   0,   0,   0,   0,   0   }, /* PC27 */
+	/* PC26 */ {   0,   0,   0,   0,   0,   0   }, /* PC26 */
+	/* PC25 */ {   0,   0,   0,   0,   0,   0   }, /* PC25 */
+	/* PC24 */ {   0,   0,   0,   0,   0,   0   }, /* PC24 */
+	/* PC23 */ {   0,   0,   0,   0,   0,   0   }, /* FDC37C78 DACFD */
+	/* PC22 */ {   0,   0,   0,   0,   0,   0   }, /* FDC37C78 DNFD */
+	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RX_CLK */
+	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII TX_CLK */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII TX_CLK */
+	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* PC17 */
+	/* PC16 */ {   0,   0,   0,   0,   0,   0   }, /* PC16 */
+	/* PC15 */ {   0,   0,   0,   0,   0,   0   }, /* PC15 */
+	/* PC14 */ {   0,   0,   0,   0,   0,   0   }, /* PC14 */
+	/* PC13 */ {   0,   0,   0,   0,   0,   0   }, /* PC13 */
+	/* PC12 */ {   0,   0,   0,   0,   0,   0   }, /* PC12 */
+	/* PC11 */ {   0,   0,   0,   0,   0,   0   }, /* PC11 */
+	/* PC10 */ {   0,   0,   0,   0,   0,   0   }, /* PC10 */
+	/* PC9  */ {   0,   0,   0,   0,   0,   0   }, /* FC9 */
+	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* PC8 */
+	/* PC7  */ {   0,   0,   0,   0,   0,   0   }, /* PC7 */
+	/* PC6  */ {   0,   0,   0,   0,   0,   0   }, /* PC6 */
+	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* PC5 */
+	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* PC4 */
+	/* PC3  */ {   0,   0,   0,   0,   0,   0   }, /* PC3 */
+	/* PC2  */ {   0,   0,   0,   0,   0,   0   }, /* PC2 */
+	/* PC1  */ {   0,   0,   0,   0,   0,   0   }, /* PC1 */
+	/* PC0  */ {   0,   0,   0,   0,   0,   0   }, /* FDC37C78 DRQFD */
+    },
+
+    /* Port D */
+    {   /*	      conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 RXD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 TXD */
+	/* PD29 */ {   1,   0,   0,   1,   0,   0   }, /* SCC1 RTS */
+	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* SCC2 RXD */
+	/* PD27 */ {   1,   1,   0,   1,   0,   0   }, /* SCC2 TXD */
+	/* PD26 */ {   1,   0,   0,   1,   0,   0   }, /* SCC2 RTS */
+	/* PD25 */ {   0,   0,   0,   0,   0,   0   }, /* PD25 */
+	/* PD24 */ {   0,   0,   0,   0,   0,   0   }, /* PD24 */
+	/* PD23 */ {   0,   0,   0,   0,   0,   0   }, /* PD23 */
+	/* PD22 */ {   0,   0,   0,   0,   0,   0   }, /* PD22 */
+	/* PD21 */ {   0,   0,   0,   0,   0,   0   }, /* PD21 */
+	/* PD20 */ {   0,   0,   0,   0,   0,   0   }, /* PD20 */
+	/* PD19 */ {   0,   0,   0,   0,   0,   0   }, /* PD19 */
+	/* PD18 */ {   0,   0,   0,   0,   0,   0   }, /* PD18 */
+	/* PD17 */ {   0,   0,   0,   0,   0,   0   }, /* PD17 */
+	/* PD16 */ {   0,   0,   0,   0,   0,   0   }, /* PD16 */
+#if defined(CONFIG_SYS_I2C_SOFT)
+	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
+	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
+#else
+#if defined(CONFIG_HARD_I2C)
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+#else /* normal I/O port pins */
+	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
+#endif
+#endif
+	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   0,   0,   0,   0,   0,   0   }, /* PD7 */
+	/* PD6  */ {   0,   0,   0,   0,   0,   0   }, /* PD6 */
+	/* PD5  */ {   0,   0,   0,   0,   0,   0   }, /* PD5 */
+	/* PD4  */ {   0,   0,   0,   0,   0,   0   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* PD3 */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* PD2 */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* PD1 */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* PD0 */
+    }
+};
+
+/* ------------------------------------------------------------------------- */
+
+/* Check Board Identity:
+ */
+int checkboard (void)
+{
+	printf ("Board: CPU87 (Rev %02x)\n", CPU86_REV & 0x7f);
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
+			  ulong orx, volatile uchar * base)
+{
+	volatile uchar c = 0xff;
+	volatile uint *sdmr_ptr;
+	volatile uint *orx_ptr;
+	ulong maxsize, size;
+	int i;
+
+	/* We must be able to test a location outsize the maximum legal size
+	 * to find out THAT we are outside; but this address still has to be
+	 * mapped by the controller. That means, that the initial mapping has
+	 * to be (at least) twice as large as the maximum expected size.
+	 */
+	maxsize = (1 + (~orx | 0x7fff)) / 2;
+
+	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
+	 * we are configuring CS1 if base != 0
+	 */
+	sdmr_ptr = &memctl->memc_psdmr;
+	orx_ptr = &memctl->memc_or2;
+
+	*orx_ptr = orx;
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
+	 */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
+	*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
+	for (i = 0; i < 8; i++)
+		*base = c;
+
+	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
+	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
+
+	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+	*base = c;
+
+	size = get_ram_size((long *)base, maxsize);
+
+	*orx_ptr = orx | ~(size - 1);
+
+	return (size);
+}
+
+phys_size_t initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	volatile memctl8260_t *memctl = &immap->im_memctl;
+
+#ifndef CONFIG_SYS_RAMBOOT
+	ulong size8, size9, size10;
+#endif
+	long psize;
+
+	psize = 32 * 1024 * 1024;
+
+	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
+	memctl->memc_psrt = CONFIG_SYS_PSRT;
+
+#ifndef CONFIG_SYS_RAMBOOT
+	/* 60x SDRAM setup:
+	 */
+	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+
+	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+
+	size10 = try_init (memctl, CONFIG_SYS_PSDMR_10COL, CONFIG_SYS_OR2_10COL,
+			  (uchar *) CONFIG_SYS_SDRAM_BASE);
+
+	psize = max(size8,max(size9,size10));
+
+	if (psize == size8) {
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
+		printf ("(60x:8COL) ");
+	} else if (psize == size9){
+		psize = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL,
+				  (uchar *) CONFIG_SYS_SDRAM_BASE);
+		printf ("(60x:9COL) ");
+	} else
+		printf ("(60x:10COL) ");
+
+#endif	/* CONFIG_SYS_RAMBOOT */
+
+	icache_enable ();
+
+	return (psize);
+}
+
+#if defined(CONFIG_CMD_DOC)
+void doc_init (void)
+{
+	doc_probe (CONFIG_SYS_DOC_BASE);
+}
+#endif
+
+#ifdef	CONFIG_PCI
+struct pci_controller hose;
+
+extern void pci_mpc8250_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+	pci_mpc8250_init(&hose);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
diff --git a/qemu/roms/u-boot/board/cpu87/cpu87.h b/qemu/roms/u-boot/board/cpu87/cpu87.h
new file mode 100644
index 000000000..45cb853a2
--- /dev/null
+++ b/qemu/roms/u-boot/board/cpu87/cpu87.h
@@ -0,0 +1,27 @@
+#ifndef __BOARD_CPU87__
+#define __BOARD_CPU87__
+
+#include <config.h>
+
+#define REG8(x)			(*(volatile unsigned char *)(x))
+
+/* CPU86 register definitions */
+#define CPU86_VME_EAC		REG8(CONFIG_SYS_BCRS_BASE + 0x00)
+#define CPU86_VME_SAC		REG8(CONFIG_SYS_BCRS_BASE + 0x01)
+#define CPU86_VME_MAC		REG8(CONFIG_SYS_BCRS_BASE + 0x02)
+#define CPU86_BCR		REG8(CONFIG_SYS_BCRS_BASE + 0x03)
+#define CPU86_BSR		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_WDOG_RPORT	REG8(CONFIG_SYS_BCRS_BASE + 0x05)
+#define CPU86_MBOX_IRQ		REG8(CONFIG_SYS_BCRS_BASE + 0x04)
+#define CPU86_REV		REG8(CONFIG_SYS_BCRS_BASE + 0x07)
+#define CPU86_VME_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x80)
+#define CPU86_VME_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x81)
+#define CPU86_LOCAL_IRQMASK	REG8(CONFIG_SYS_BCRS_BASE + 0x82)
+#define CPU86_LOCAL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x83)
+#define CPU86_PMCL_IRQSTATUS	REG8(CONFIG_SYS_BCRS_BASE + 0x84)
+
+/* Board Control Register bits */
+#define CPU86_BCR_FWPT		0x01
+#define CPU86_BCR_FWRE		0x02
+
+#endif /* __BOARD_CPU87__ */
diff --git a/qemu/roms/u-boot/board/cpu87/flash.c b/qemu/roms/u-boot/board/cpu87/flash.c
new file mode 100644
index 000000000..96ba7d9b3
--- /dev/null
+++ b/qemu/roms/u-boot/board/cpu87/flash.c
@@ -0,0 +1,608 @@
+/*
+ * (C) Copyright 2001-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Flash Routines for Intel devices
+ *
+ *--------------------------------------------------------------------
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include "cpu87.h"
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_int_get_size (volatile unsigned long *baseaddr,
+					  flash_info_t * info)
+{
+	short i;
+	unsigned long flashtest_h, flashtest_l;
+
+	info->sector_count = info->size = 0;
+	info->flash_id = FLASH_UNKNOWN;
+
+	/* Write identify command sequence and test FLASH answer
+	 */
+	baseaddr[0] = 0x00900090;
+	baseaddr[1] = 0x00900090;
+
+	flashtest_h = baseaddr[0];	/* manufacturer ID	*/
+	flashtest_l = baseaddr[1];
+
+	if (flashtest_h != INTEL_MANUFACT || flashtest_l != INTEL_MANUFACT)
+		return (0);		/* no or unknown flash	*/
+
+	flashtest_h = baseaddr[2];	/* device ID	        */
+	flashtest_l = baseaddr[3];
+
+	if (flashtest_h != flashtest_l)
+		return (0);
+
+	switch (flashtest_h) {
+	case INTEL_ID_28F160C3B:
+		info->flash_id = FLASH_28F160C3B;
+		info->sector_count = 39;
+		info->size = 0x00800000;	/* 4 * 2 MB = 8 MB	*/
+		break;
+	case INTEL_ID_28F160F3B:
+		info->flash_id = FLASH_28F160F3B;
+		info->sector_count = 39;
+		info->size = 0x00800000;	/* 4 * 2 MB = 8 MB      */
+		break;
+	case INTEL_ID_28F640C3B:
+		info->flash_id = FLASH_28F640C3B;
+		info->sector_count = 135;
+		info->size = 0x02000000;	/* 16 * 2 MB = 32 MB	*/
+		break;
+	default:
+		return (0);			/* no or unknown flash	*/
+	}
+
+	info->flash_id |= INTEL_MANUFACT << 16; /* set manufacturer offset */
+
+	if (info->flash_id & FLASH_BTYPE) {
+		volatile unsigned long *tmp = baseaddr;
+
+		/* set up sector start adress table (bottom sector type)
+		 * AND unlock the sectors (if our chip is 160C3)
+		 */
+		for (i = 0; i < info->sector_count; i++) {
+			if (((info->flash_id & FLASH_TYPEMASK) == FLASH_28F160C3B) ||
+			    ((info->flash_id & FLASH_TYPEMASK) == FLASH_28F640C3B)) {
+				tmp[0] = 0x00600060;
+				tmp[1] = 0x00600060;
+				tmp[0] = 0x00D000D0;
+				tmp[1] = 0x00D000D0;
+			}
+			info->start[i] = (uint) tmp;
+			tmp += i < 8 ? 0x2000 : 0x10000; /* pointer arith       */
+		}
+	}
+
+	memset (info->protect, 0, info->sector_count);
+
+	baseaddr[0] = 0x00FF00FF;
+	baseaddr[1] = 0x00FF00FF;
+
+	return (info->size);
+}
+
+static ulong flash_amd_get_size (vu_char *addr, flash_info_t *info)
+{
+	short i;
+	uchar vendor, devid;
+	ulong base = (ulong)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x0555] = 0xAA;
+	addr[0x02AA] = 0x55;
+	addr[0x0555] = 0x90;
+
+	udelay(1000);
+
+	vendor = addr[0];
+	devid = addr[1] & 0xff;
+
+	/* only support AMD */
+	if (vendor != 0x01) {
+		return 0;
+	}
+
+	vendor &= 0xf;
+	devid &= 0xff;
+
+	if (devid == AMD_ID_F040B) {
+		info->flash_id     = vendor << 16 | devid;
+		info->sector_count = 8;
+		info->size         = info->sector_count * 0x10000;
+	}
+	else if (devid == AMD_ID_F080B) {
+		info->flash_id     = vendor << 16 | devid;
+		info->sector_count = 16;
+		info->size         = 4 * info->sector_count * 0x10000;
+	}
+	else if (devid == AMD_ID_F016D) {
+		info->flash_id     = vendor << 16 | devid;
+		info->sector_count = 32;
+		info->size         = 4 * info->sector_count * 0x10000;
+	}
+	else {
+		printf ("## Unknown Flash Type: %02x\n", devid);
+		return 0;
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* sector base address */
+		info->start[i] = base + i * (info->size / info->sector_count);
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr = (volatile unsigned char *)(info->start[i]);
+		info->protect[i] = addr[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_char *)info->start[0];
+		addr[0] = 0xF0; /* reset bank */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size_b0 = 0;
+	unsigned long size_b1 = 0;
+	int i;
+
+	/* Init: no FLASHes known
+	 */
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Disable flash protection */
+	CPU86_BCR |= (CPU86_BCR_FWPT | CPU86_BCR_FWRE);
+
+	/* Static FLASH Bank configuration here (only one bank) */
+
+	size_b0 = flash_int_get_size ((ulong *) CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+	size_b1 = flash_amd_get_size ((uchar *) CONFIG_SYS_BOOTROM_BASE, &flash_info[1]);
+
+	if (size_b0 > 0 || size_b1 > 0) {
+
+		printf("(");
+
+		if (size_b0 > 0) {
+			puts ("Bank#1 - ");
+			print_size (size_b0, (size_b1 > 0) ? ", " : ") ");
+		}
+
+		if (size_b1 > 0) {
+			puts ("Bank#2 - ");
+			print_size (size_b1, ") ");
+		}
+	}
+	else {
+		printf ("## No FLASH found.\n");
+		return 0;
+	}
+	/* protect monitor and environment sectors
+	 */
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_BOOTROM_BASE
+	if (size_b1) {
+		/* If U-Boot is booted from ROM the CONFIG_SYS_MONITOR_BASE > CONFIG_SYS_FLASH_BASE
+		 * but we shouldn't protect it.
+		 */
+
+		flash_protect  (FLAG_PROTECT_SET,
+				CONFIG_SYS_MONITOR_BASE,
+				CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[1]
+		);
+	}
+#else
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+	flash_protect (FLAG_PROTECT_SET,
+		       CONFIG_SYS_MONITOR_BASE,
+		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]
+	);
+#endif
+#endif
+
+#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
+# endif
+# if CONFIG_ENV_ADDR >= CONFIG_SYS_BOOTROM_BASE
+	if (size_b1) {
+		flash_protect (FLAG_PROTECT_SET,
+				CONFIG_ENV_ADDR,
+				CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
+	}
+# else
+	flash_protect (FLAG_PROTECT_SET,
+		       CONFIG_ENV_ADDR,
+		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
+# endif
+#endif
+
+	return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch ((info->flash_id >> 16) & 0xff) {
+	case 0x89:
+		printf ("INTEL ");
+		break;
+	case 0x1:
+		printf ("AMD ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F160C3B:
+		printf ("28F160C3B (16 Mbit, bottom sector)\n");
+		break;
+	case FLASH_28F160F3B:
+		printf ("28F160F3B (16 Mbit, bottom sector)\n");
+		break;
+	case FLASH_28F640C3B:
+		printf ("28F640C3B (64 M, bottom sector)\n");
+		break;
+	case AMD_ID_F040B:
+		printf ("AM29F040B (4 Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	if (info->size < 0x100000)
+		printf ("  Size: %ld KB in %d Sectors\n",
+				info->size >> 10, info->sector_count);
+	else
+		printf ("  Size: %ld MB in %d Sectors\n",
+				info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	vu_char *addr = (vu_char *)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect])
+			prot++;
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+				prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* Check the type of erased flash
+	 */
+	if (info->flash_id >> 16 == 0x1) {
+		/* Erase AMD flash
+		 */
+		l_sect = -1;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr[0x0555] = 0xAA;
+		addr[0x02AA] = 0x55;
+		addr[0x0555] = 0x80;
+		addr[0x0555] = 0xAA;
+		addr[0x02AA] = 0x55;
+
+		/* wait at least 80us - let's wait 1 ms */
+		udelay (1000);
+
+		/* Start erase on unprotected sectors */
+		for (sect = s_first; sect<=s_last; sect++) {
+			if (info->protect[sect] == 0) { /* not protected */
+				addr = (vu_char *)(info->start[sect]);
+				addr[0] = 0x30;
+				l_sect = sect;
+			}
+		}
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* wait at least 80us - let's wait 1 ms */
+		udelay (1000);
+
+		/*
+		 * We wait for the last triggered sector
+		 */
+		if (l_sect < 0)
+			goto AMD_DONE;
+
+		start = get_timer (0);
+		last  = start;
+		addr = (vu_char *)(info->start[l_sect]);
+		while ((addr[0] & 0x80) != 0x80) {
+			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+				printf ("Timeout\n");
+				return 1;
+			}
+			/* show that we're waiting */
+			if ((now - last) > 1000) {      /* every second */
+				serial_putc ('.');
+				last = now;
+			}
+		}
+
+AMD_DONE:
+		/* reset to read mode */
+		addr = (volatile unsigned char *)info->start[0];
+		addr[0] = 0xF0;     /* reset bank */
+
+	} else {
+		/* Erase Intel flash
+		 */
+
+		/* Start erase on unprotected sectors
+		 */
+		for (sect = s_first; sect <= s_last; sect++) {
+			volatile ulong *addr =
+				(volatile unsigned long *) info->start[sect];
+
+			start = get_timer (0);
+			last = start;
+			if (info->protect[sect] == 0) {
+			/* Disable interrupts which might cause a timeout here
+			 */
+				flag = disable_interrupts ();
+
+				/* Erase the block
+				 */
+				addr[0] = 0x00200020;
+				addr[1] = 0x00200020;
+				addr[0] = 0x00D000D0;
+				addr[1] = 0x00D000D0;
+
+				/* re-enable interrupts if necessary
+				 */
+				if (flag)
+					enable_interrupts ();
+
+				/* wait at least 80us - let's wait 1 ms
+				 */
+				udelay (1000);
+
+				last = start;
+				while ((addr[0] & 0x00800080) != 0x00800080 ||
+				   (addr[1] & 0x00800080) != 0x00800080) {
+					if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+						printf ("Timeout (erase suspended!)\n");
+						/* Suspend erase
+						 */
+						addr[0] = 0x00B000B0;
+						addr[1] = 0x00B000B0;
+						goto DONE;
+					}
+					/* show that we're waiting
+					 */
+					if ((now - last) > 1000) {	/* every second */
+						serial_putc ('.');
+						last = now;
+					}
+				}
+				if (addr[0] & 0x00220022 || addr[1] & 0x00220022) {
+					printf ("*** ERROR: erase failed!\n");
+					goto DONE;
+				}
+			}
+			/* Clear status register and reset to read mode
+			 */
+			addr[0] = 0x00500050;
+			addr[1] = 0x00500050;
+			addr[0] = 0x00FF00FF;
+			addr[1] = 0x00FF00FF;
+		}
+	}
+
+	printf (" done\n");
+
+DONE:
+	return 0;
+}
+
+static int write_word (flash_info_t *, volatile unsigned long *, ulong);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong v;
+	int i, l, rc, cc = cnt, res = 0;
+
+	if (info->flash_id >> 16 == 0x1) {
+
+		/* Write to AMD 8-bit flash
+		 */
+		while (cnt > 0) {
+			if ((rc = write_byte(info, addr, *src)) != 0) {
+				return (rc);
+			}
+			addr++;
+			src++;
+			cnt--;
+		}
+
+		return (0);
+	} else {
+
+		/* Write to Intel 64-bit flash
+		 */
+		for (v=0; cc > 0; addr += 4, cc -= 4 - l) {
+			l = (addr & 3);
+			addr &= ~3;
+
+			for (i = 0; i < 4; i++) {
+				v = (v << 8) + (i < l || i - l >= cc ?
+					*((unsigned char *) addr + i) : *src++);
+			}
+
+			if ((res = write_word (info, (volatile unsigned long *) addr, v)) != 0)
+				break;
+		}
+	}
+
+	return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t * info, volatile unsigned long *addr,
+					   ulong data)
+{
+	int flag, res = 0;
+	ulong start;
+
+	/* Check if Flash is (sufficiently) erased
+	 */
+	if ((*addr & data) != data)
+		return (2);
+
+	/* Disable interrupts which might cause a timeout here
+	 */
+	flag = disable_interrupts ();
+
+	*addr = 0x00400040;
+	*addr = data;
+
+	/* re-enable interrupts if necessary
+	 */
+	if (flag)
+		enable_interrupts ();
+
+	start = get_timer (0);
+	while ((*addr & 0x00800080) != 0x00800080) {
+		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+			/* Suspend program
+			 */
+			*addr = 0x00B000B0;
+			res = 1;
+			goto OUT;
+		}
+	}
+
+	if (*addr & 0x00220022) {
+		printf ("*** ERROR: program failed!\n");
+		res = 1;
+	}
+
+OUT:
+	/* Clear status register and reset to read mode
+	 */
+	*addr = 0x00500050;
+	*addr = 0x00FF00FF;
+
+	return (res);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a byte to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_byte (flash_info_t *info, ulong dest, uchar data)
+{
+	vu_char *addr = (vu_char *)(info->start[0]);
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_char *)dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0x0555] = 0xAA;
+	addr[0x02AA] = 0x55;
+	addr[0x0555] = 0xA0;
+
+	*((vu_char *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
+		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */