Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 189 deletions

diff --git a/qemu/roms/u-boot/board/cogent/serial.c b/qemu/roms/u-boot/board/cogent/serial.c
deleted file mode 100644
index 95c812072..000000000
--- a/qemu/roms/u-boot/board/cogent/serial.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Simple serial driver for Cogent motherboard serial ports
- * for use during boot
- */
-
-#include <common.h>
-#include "serial.h"
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
-
-#if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
-	(defined(CONFIG_MPC8260) && defined(CONFIG_CONS_NONE))
-
-#if CONFIG_CONS_INDEX == 1
-#define CMA_MB_SERIAL_BASE	CMA_MB_SERIALA_BASE
-#elif CONFIG_CONS_INDEX == 2
-#define CMA_MB_SERIAL_BASE	CMA_MB_SERIALB_BASE
-#elif CONFIG_CONS_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
-#define CMA_MB_SERIAL_BASE	CMA_MB_SER2A_BASE
-#elif CONFIG_CONS_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
-#define CMA_MB_SERIAL_BASE	CMA_MB_SER2B_BASE
-#else
-#error CONFIG_CONS_INDEX must be configured for Cogent motherboard serial
-#endif
-
-static int cogent_serial_init(void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
-
-	cma_mb_reg_write (&mbsp->ser_ier, 0x00);	/* turn off interrupts */
-	serial_setbrg ();
-	cma_mb_reg_write (&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
-	cma_mb_reg_write (&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
-	cma_mb_reg_write (&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
-
-	return (0);
-}
-
-static void cogent_serial_setbrg(void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
-	unsigned int divisor;
-	unsigned char lcr;
-
-	if ((divisor = br_to_div (gd->baudrate)) == 0)
-		divisor = DEFDIV;
-
-	lcr = cma_mb_reg_read (&mbsp->ser_lcr);
-	cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80);	/* Access baud rate(set DLAB) */
-	cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
-	cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
-	cma_mb_reg_write (&mbsp->ser_lcr, lcr);	/* unset DLAB */
-}
-
-static void cogent_serial_putc(const char c)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
-
-	if (c == '\n')
-		serial_putc ('\r');
-
-	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
-
-	cma_mb_reg_write (&mbsp->ser_thr, c);
-}
-
-static int cogent_serial_getc(void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
-
-	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
-
-	return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
-}
-
-static int cogent_serial_tstc(void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
-
-	return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0);
-}
-
-static struct serial_device cogent_serial_drv = {
-	.name	= "cogent_serial",
-	.start	= cogent_serial_init,
-	.stop	= NULL,
-	.setbrg	= cogent_serial_setbrg,
-	.putc	= cogent_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= cogent_serial_getc,
-	.tstc	= cogent_serial_tstc,
-};
-
-void cogent_serial_initialize(void)
-{
-	serial_register(&cogent_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &cogent_serial_drv;
-}
-#endif /* CONS_NONE */
-
-#if defined(CONFIG_CMD_KGDB) && \
-    defined(CONFIG_KGDB_NONE)
-
-#if CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Console and kgdb are on the same serial port - this is not supported
-#endif
-
-#if CONFIG_KGDB_INDEX == 1
-#define CMA_MB_KGDB_SER_BASE	CMA_MB_SERIALA_BASE
-#elif CONFIG_KGDB_INDEX == 2
-#define CMA_MB_KGDB_SER_BASE	CMA_MB_SERIALB_BASE
-#elif CONFIG_KGDB_INDEX == 3 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
-#define CMA_MB_KGDB_SER_BASE	CMA_MB_SER2A_BASE
-#elif CONFIG_KGDB_INDEX == 4 && (CMA_MB_CAPS & CMA_MB_CAP_SER2)
-#define CMA_MB_KGDB_SER_BASE	CMA_MB_SER2B_BASE
-#else
-#error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial
-#endif
-
-void kgdb_serial_init (void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
-	unsigned int divisor;
-
-	if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0)
-		divisor = DEFDIV;
-
-	cma_mb_reg_write (&mbsp->ser_ier, 0x00);	/* turn off interrupts */
-	cma_mb_reg_write (&mbsp->ser_lcr, 0x80);	/* Access baud rate(set DLAB) */
-	cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
-	cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
-	cma_mb_reg_write (&mbsp->ser_lcr, 0x03);	/* 8 data, 1 stop, no parity */
-	cma_mb_reg_write (&mbsp->ser_mcr, 0x03);	/* RTS/DTR */
-	cma_mb_reg_write (&mbsp->ser_fcr, 0x07);	/* Clear & enable FIFOs */
-
-	printf ("[on cma10x serial port B] ");
-}
-
-void putDebugChar (int c)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
-
-	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
-
-	cma_mb_reg_write (&mbsp->ser_thr, c & 0xff);
-}
-
-void putDebugStr (const char *str)
-{
-	while (*str != '\0') {
-		if (*str == '\n')
-			putDebugChar ('\r');
-		putDebugChar (*str++);
-	}
-}
-
-int getDebugChar (void)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
-
-	while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
-
-	return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
-}
-
-void kgdb_interruptible (int yes)
-{
-	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
-
-	if (yes == 1) {
-		printf ("kgdb: turning serial ints on\n");
-		cma_mb_reg_write (&mbsp->ser_ier, 0xf);
-	} else {
-		printf ("kgdb: turning serial ints off\n");
-		cma_mb_reg_write (&mbsp->ser_ier, 0x0);
-	}
-}
-
-#endif /* KGDB && KGDB_NONE */
-
-#endif /* CAPS & SERPAR */