Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 203 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/atmel/at91sam9rlek/at91sam9rlek.c b/qemu/roms/u-boot/board/atmel/at91sam9rlek/at91sam9rlek.c
new file mode 100644
index 000000000..c700a9076
--- /dev/null
+++ b/qemu/roms/u-boot/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -0,0 +1,203 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9rlek_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = readl(&matrix->ebicsa);
+	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+
+	writel(csa, &matrix->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+		&smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+		&smc->cs[3].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		AT91_SMC_MODE_DBW_8 |
+#endif
+		AT91_SMC_MODE_TDF_CYCLE(2),
+		&smc->cs[3].mode);
+
+	writel(1 << ATMEL_ID_PIOD, &pmc->pcer);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 1);  /* power down */
+}
+static void at91sam9rlek_lcd_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	at91_set_B_periph(AT91_PIN_PC1, 0);	/* LCDPWR */
+	at91_set_A_periph(AT91_PIN_PC5, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDCC */
+	at91_set_B_periph(AT91_PIN_PC9, 0);	/* LCDD3 */
+	at91_set_B_periph(AT91_PIN_PC10, 0);	/* LCDD4 */
+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* LCDD5 */
+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD6 */
+	at91_set_B_periph(AT91_PIN_PC13, 0);	/* LCDD7 */
+	at91_set_B_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_B_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
+	at91_set_B_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_B_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PC20, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PC21, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PC22, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PC23, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
+
+	writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		ATMEL_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_early_init_f(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	/* Enable clocks for all PIOs */
+	writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+		(1 << ATMEL_ID_PIOC) | (1 << ATMEL_ID_PIOD),
+		&pmc->pcer);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of AT91SAM9RLEK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	at91_seriald_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9rlek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_LCD
+	at91sam9rlek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size(
+		(void *)CONFIG_SYS_SDRAM_BASE,
+		CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}