Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 180 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/amcc/taihu/taihu.c b/qemu/roms/u-boot/board/amcc/taihu/taihu.c
new file mode 100644
index 000000000..fcb893633
--- /dev/null
+++ b/qemu/roms/u-boot/board/amcc/taihu/taihu.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2005-2007
+ * Beijing UD Technology Co., Ltd., taihusupport@amcc.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <spi.h>
+#include <netdev.h>
+#include <asm/ppc4xx-gpio.h>
+
+extern int lcd_init(void);
+
+/*
+ * board_early_init_f
+ */
+int board_early_init_f(void)
+{
+	lcd_init();
+
+	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
+	mtdcr(UIC0CR, 0x00000000);
+	mtdcr(UIC0PR, 0xFFFF7F00);	/* set int polarities */
+	mtdcr(UIC0TR, 0x00000000);	/* set int trigger levels */
+	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
+
+	mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);	/* memory bank 3 (CPLD_LCM) initialization */
+	mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
+
+	/*
+	 * Configure CPC0_PCI to enable PerWE as output
+	 * and enable the internal PCI arbiter
+	 */
+	mtdcr(CPC0_PCI, CPC0_PCI_SPE | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char buf[64];
+	int i = getenv_f("serial#", buf, sizeof(buf));
+
+	puts("Board: Taihu - AMCC PPC405EP Evaluation Board");
+
+	if (i > 0) {
+		puts(", serial# ");
+		puts(buf);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
+{
+	char stat;
+	int i;
+
+	stat = in_8((u8 *) CPLD_REG0_ADDR);
+	printf("SW2 status: ");
+	for (i=0; i<4; i++) /* 4-position */
+		printf("%d:%s ", i, stat & (0x08 >> i)?"on":"off");
+	printf("\n");
+	return 0;
+}
+
+U_BOOT_CMD (
+	sw2_stat, 1, 1, do_sw_stat,
+	"show status of switch 2",
+	""
+);
+
+static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char * const argv[])
+{
+	int led_no;
+
+	if (argc != 3)
+		return cmd_usage(cmd_tp);
+
+	led_no = simple_strtoul(argv[1], NULL, 16);
+	if (led_no != 1 && led_no != 2)
+		return cmd_usage(cmd_tp);
+
+	if (strcmp(argv[2],"off") == 0x0) {
+		if (led_no == 1)
+			gpio_write_bit(30, 1);
+		else
+			gpio_write_bit(31, 1);
+	} else if (strcmp(argv[2],"on") == 0x0) {
+		if (led_no == 1)
+			gpio_write_bit(30, 0);
+		else
+			gpio_write_bit(31, 0);
+	} else {
+		return cmd_usage(cmd_tp);
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD (
+	led_ctl, 3, 1, do_led_ctl,
+	"make led 1 or 2  on or off",
+	"<led_no> <on/off>	-  make led <led_no> on/off,\n"
+	"\tled_no is 1 or 2"
+);
+
+#define SPI_CS_GPIO0	0
+#define SPI_SCLK_GPIO14	14
+#define SPI_DIN_GPIO15	15
+#define SPI_DOUT_GPIO16	16
+
+void spi_scl(int bit)
+{
+	gpio_write_bit(SPI_SCLK_GPIO14, bit);
+}
+
+void spi_sda(int bit)
+{
+	gpio_write_bit(SPI_DOUT_GPIO16, bit);
+}
+
+unsigned char spi_read(void)
+{
+	return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	gpio_write_bit(SPI_CS_GPIO0, 1);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	gpio_write_bit(SPI_CS_GPIO0, 0);
+}
+
+#ifdef CONFIG_PCI
+static unsigned char int_lines[32] = {
+	29, 30, 27, 28, 29, 30, 25, 27,
+	29, 30, 27, 28, 29, 30, 27, 28,
+	29, 30, 27, 28, 29, 30, 27, 28,
+	29, 30, 27, 28, 29, 30, 27, 28};
+
+static void taihu_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char int_line = int_lines[PCI_DEV(dev) & 31];
+
+	pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
+}
+
+int pci_pre_init(struct pci_controller *hose)
+{
+	hose->fixup_irq = taihu_pci_fixup_irq;
+	return 1;
+}
+#endif /* CONFIG_PCI */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);
+	return pci_eth_init(bis);
+}