Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

5 files changed, 467 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/board/altera/socfpga/Makefile b/qemu/roms/u-boot/board/altera/socfpga/Makefile
new file mode 100644
index 000000000..de339ec7f
--- /dev/null
+++ b/qemu/roms/u-boot/board/altera/socfpga/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= socfpga_cyclone5.o
+obj-$(CONFIG_SPL_BUILD) += pinmux_config.o
diff --git a/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.c b/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.c
new file mode 100644
index 000000000..8b09005b6
--- /dev/null
+++ b/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.c
@@ -0,0 +1,214 @@
+/* This file is generated by Preloader Generator */
+
+#include "pinmux_config.h"
+
+/* pin mux configuration data */
+unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+	0, /* EMACIO0 - Unused */
+	2, /* EMACIO1 - USB */
+	2, /* EMACIO2 - USB */
+	2, /* EMACIO3 - USB */
+	2, /* EMACIO4 - USB */
+	2, /* EMACIO5 - USB */
+	2, /* EMACIO6 - USB */
+	2, /* EMACIO7 - USB */
+	2, /* EMACIO8 - USB */
+	0, /* EMACIO9 - Unused */
+	2, /* EMACIO10 - USB */
+	2, /* EMACIO11 - USB */
+	2, /* EMACIO12 - USB */
+	2, /* EMACIO13 - USB */
+	0, /* EMACIO14 - N/A */
+	0, /* EMACIO15 - N/A */
+	0, /* EMACIO16 - N/A */
+	0, /* EMACIO17 - N/A */
+	0, /* EMACIO18 - N/A */
+	0, /* EMACIO19 - N/A */
+	3, /* FLASHIO0 - SDMMC */
+	3, /* FLASHIO1 - SDMMC */
+	3, /* FLASHIO2 - SDMMC */
+	3, /* FLASHIO3 - SDMMC */
+	0, /* FLASHIO4 - SDMMC */
+	0, /* FLASHIO5 - SDMMC */
+	0, /* FLASHIO6 - SDMMC */
+	0, /* FLASHIO7 - SDMMC */
+	0, /* FLASHIO8 - SDMMC */
+	3, /* FLASHIO9 - SDMMC */
+	3, /* FLASHIO10 - SDMMC */
+	3, /* FLASHIO11 - SDMMC */
+	3, /* GENERALIO0 - TRACE */
+	3, /* GENERALIO1 - TRACE */
+	3, /* GENERALIO2 - TRACE */
+	3, /* GENERALIO3 - TRACE  */
+	3, /* GENERALIO4 - TRACE  */
+	3, /* GENERALIO5 - TRACE  */
+	3, /* GENERALIO6 - TRACE  */
+	3, /* GENERALIO7 - TRACE  */
+	3, /* GENERALIO8 - TRACE  */
+	3, /* GENERALIO9 - SPIM0 */
+	3, /* GENERALIO10 - SPIM0 */
+	3, /* GENERALIO11 - SPIM0 */
+	3, /* GENERALIO12 - SPIM0 */
+	2, /* GENERALIO13 - CAN0 */
+	2, /* GENERALIO14 - CAN0 */
+	3, /* GENERALIO15 - I2C0 */
+	3, /* GENERALIO16 - I2C0 */
+	2, /* GENERALIO17 - UART0 */
+	2, /* GENERALIO18 - UART0 */
+	0, /* GENERALIO19 - N/A */
+	0, /* GENERALIO20 - N/A */
+	0, /* GENERALIO21 - N/A */
+	0, /* GENERALIO22 - N/A */
+	0, /* GENERALIO23 - N/A */
+	0, /* GENERALIO24 - N/A */
+	0, /* GENERALIO25 - N/A */
+	0, /* GENERALIO26 - N/A */
+	0, /* GENERALIO27 - N/A */
+	0, /* GENERALIO28 - N/A */
+	0, /* GENERALIO29 - N/A */
+	0, /* GENERALIO30 - N/A */
+	0, /* GENERALIO31 - N/A */
+	2, /* MIXED1IO0 - EMAC */
+	2, /* MIXED1IO1 - EMAC */
+	2, /* MIXED1IO2 - EMAC */
+	2, /* MIXED1IO3 - EMAC */
+	2, /* MIXED1IO4 - EMAC */
+	2, /* MIXED1IO5 - EMAC */
+	2, /* MIXED1IO6 - EMAC */
+	2, /* MIXED1IO7 - EMAC */
+	2, /* MIXED1IO8 - EMAC */
+	2, /* MIXED1IO9 - EMAC */
+	2, /* MIXED1IO10 - EMAC */
+	2, /* MIXED1IO11 - EMAC */
+	2, /* MIXED1IO12 - EMAC */
+	2, /* MIXED1IO13 - EMAC */
+	0, /* MIXED1IO14 - Unused */
+	3, /* MIXED1IO15 - QSPI */
+	3, /* MIXED1IO16 - QSPI */
+	3, /* MIXED1IO17 - QSPI */
+	3, /* MIXED1IO18 - QSPI */
+	3, /* MIXED1IO19 - QSPI */
+	3, /* MIXED1IO20 - QSPI */
+	0, /* MIXED1IO21 - GPIO */
+	0, /* MIXED2IO0 - N/A */
+	0, /* MIXED2IO1 - N/A */
+	0, /* MIXED2IO2 - N/A */
+	0, /* MIXED2IO3 - N/A */
+	0, /* MIXED2IO4 - N/A */
+	0, /* MIXED2IO5 - N/A */
+	0, /* MIXED2IO6 - N/A */
+	0, /* MIXED2IO7 - N/A */
+	0, /* GPLINMUX48 */
+	0, /* GPLINMUX49 */
+	0, /* GPLINMUX50 */
+	0, /* GPLINMUX51 */
+	0, /* GPLINMUX52 */
+	0, /* GPLINMUX53 */
+	0, /* GPLINMUX54 */
+	0, /* GPLINMUX55 */
+	0, /* GPLINMUX56 */
+	0, /* GPLINMUX57 */
+	0, /* GPLINMUX58 */
+	0, /* GPLINMUX59 */
+	0, /* GPLINMUX60 */
+	0, /* GPLINMUX61 */
+	0, /* GPLINMUX62 */
+	0, /* GPLINMUX63 */
+	0, /* GPLINMUX64 */
+	0, /* GPLINMUX65 */
+	0, /* GPLINMUX66 */
+	0, /* GPLINMUX67 */
+	0, /* GPLINMUX68 */
+	0, /* GPLINMUX69 */
+	0, /* GPLINMUX70 */
+	1, /* GPLMUX0 */
+	1, /* GPLMUX1 */
+	1, /* GPLMUX2 */
+	1, /* GPLMUX3 */
+	1, /* GPLMUX4 */
+	1, /* GPLMUX5 */
+	1, /* GPLMUX6 */
+	1, /* GPLMUX7 */
+	1, /* GPLMUX8 */
+	1, /* GPLMUX9 */
+	1, /* GPLMUX10 */
+	1, /* GPLMUX11 */
+	1, /* GPLMUX12 */
+	1, /* GPLMUX13 */
+	1, /* GPLMUX14 */
+	1, /* GPLMUX15 */
+	1, /* GPLMUX16 */
+	1, /* GPLMUX17 */
+	1, /* GPLMUX18 */
+	1, /* GPLMUX19 */
+	1, /* GPLMUX20 */
+	1, /* GPLMUX21 */
+	1, /* GPLMUX22 */
+	1, /* GPLMUX23 */
+	1, /* GPLMUX24 */
+	1, /* GPLMUX25 */
+	1, /* GPLMUX26 */
+	1, /* GPLMUX27 */
+	1, /* GPLMUX28 */
+	1, /* GPLMUX29 */
+	1, /* GPLMUX30 */
+	1, /* GPLMUX31 */
+	1, /* GPLMUX32 */
+	1, /* GPLMUX33 */
+	1, /* GPLMUX34 */
+	1, /* GPLMUX35 */
+	1, /* GPLMUX36 */
+	1, /* GPLMUX37 */
+	1, /* GPLMUX38 */
+	1, /* GPLMUX39 */
+	1, /* GPLMUX40 */
+	1, /* GPLMUX41 */
+	1, /* GPLMUX42 */
+	1, /* GPLMUX43 */
+	1, /* GPLMUX44 */
+	1, /* GPLMUX45 */
+	1, /* GPLMUX46 */
+	1, /* GPLMUX47 */
+	1, /* GPLMUX48 */
+	1, /* GPLMUX49 */
+	1, /* GPLMUX50 */
+	1, /* GPLMUX51 */
+	1, /* GPLMUX52 */
+	1, /* GPLMUX53 */
+	1, /* GPLMUX54 */
+	1, /* GPLMUX55 */
+	1, /* GPLMUX56 */
+	1, /* GPLMUX57 */
+	1, /* GPLMUX58 */
+	1, /* GPLMUX59 */
+	1, /* GPLMUX60 */
+	1, /* GPLMUX61 */
+	1, /* GPLMUX62 */
+	1, /* GPLMUX63 */
+	1, /* GPLMUX64 */
+	1, /* GPLMUX65 */
+	1, /* GPLMUX66 */
+	1, /* GPLMUX67 */
+	1, /* GPLMUX68 */
+	1, /* GPLMUX69 */
+	1, /* GPLMUX70 */
+	0, /* NANDUSEFPGA */
+	0, /* UART0USEFPGA */
+	0, /* RGMII1USEFPGA */
+	0, /* SPIS0USEFPGA */
+	0, /* CAN0USEFPGA */
+	0, /* I2C0USEFPGA */
+	0, /* SDMMCUSEFPGA */
+	0, /* QSPIUSEFPGA */
+	0, /* SPIS1USEFPGA */
+	0, /* RGMII0USEFPGA */
+	0, /* UART1USEFPGA */
+	0, /* CAN1USEFPGA */
+	0, /* USB1USEFPGA */
+	0, /* I2C3USEFPGA */
+	0, /* I2C2USEFPGA */
+	0, /* I2C1USEFPGA */
+	0, /* SPIM1USEFPGA */
+	0, /* USB0USEFPGA */
+	0 /* SPIM0USEFPGA */
+};
diff --git a/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.h b/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.h
new file mode 100644
index 000000000..f278f2b28
--- /dev/null
+++ b/qemu/roms/u-boot/board/altera/socfpga/pinmux_config.h
@@ -0,0 +1,54 @@
+/* This file is generated by Preloader Generator */
+
+#ifndef _PRELOADER_PINMUX_CONFIG_H_
+#define _PRELOADER_PINMUX_CONFIG_H_
+
+/*
+ * State of enabling for which IP connected out through the muxing.
+ * Value 1 mean the IP connection is muxed out
+ */
+#define CONFIG_HPS_EMAC0		(0)
+#define CONFIG_HPS_EMAC1		(1)
+#define CONFIG_HPS_USB0			(0)
+#define CONFIG_HPS_USB1			(1)
+#define CONFIG_HPS_NAND			(0)
+#define CONFIG_HPS_SDMMC		(1)
+#define CONFIG_HPS_QSPI			(1)
+#define CONFIG_HPS_UART0		(1)
+#define CONFIG_HPS_UART1		(0)
+#define CONFIG_HPS_TRACE		(1)
+#define CONFIG_HPS_I2C0			(1)
+#define CONFIG_HPS_I2C1			(0)
+#define CONFIG_HPS_I2C2			(0)
+#define CONFIG_HPS_I2C3			(0)
+#define CONFIG_HPS_SPIM0		(1)
+#define CONFIG_HPS_SPIM1		(0)
+#define CONFIG_HPS_SPIS0		(0)
+#define CONFIG_HPS_SPIS1		(0)
+#define CONFIG_HPS_CAN0			(1)
+#define CONFIG_HPS_CAN1			(0)
+
+/* IP attribute value (which affected by pin muxing configuration) */
+#define CONFIG_HPS_SDMMC_BUSWIDTH	(4)
+
+/* 1 if the pins are connected out */
+#define CONFIG_HPS_QSPI_CS0		(1)
+#define CONFIG_HPS_QSPI_CS1		(0)
+#define CONFIG_HPS_QSPI_CS2		(0)
+#define CONFIG_HPS_QSPI_CS3		(0)
+
+/* UART */
+/* 1 means the pin is mux out or available */
+#define CONFIG_HPS_UART0_TX		(1)
+#define CONFIG_HPS_UART0_RX		(1)
+#define CONFIG_HPS_UART0_CTS		(0)
+#define CONFIG_HPS_UART0_RTS		(0)
+#define CONFIG_HPS_UART1_TX		(0)
+#define CONFIG_HPS_UART1_RX		(0)
+#define CONFIG_HPS_UART1_CTS		(0)
+#define CONFIG_HPS_UART1_RTS		(0)
+
+/* Pin mux data */
+#define CONFIG_HPS_PINMUX_NUM		(207)
+
+#endif /* _PRELOADER_PINMUX_CONFIG_H_ */
diff --git a/qemu/roms/u-boot/board/altera/socfpga/pll_config.h b/qemu/roms/u-boot/board/altera/socfpga/pll_config.h
new file mode 100644
index 000000000..9bd044230
--- /dev/null
+++ b/qemu/roms/u-boot/board/altera/socfpga/pll_config.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier:    BSD-3-Clause
+ */
+
+/* This file is generated by Preloader Generator */
+
+#ifndef _PRELOADER_PLL_CONFIG_H_
+#define _PRELOADER_PLL_CONFIG_H_
+
+/* PLL configuration data */
+/* Main PLL */
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER			(63)
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT		(3)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT	(3)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT	(12)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK		(0)
+/*
+ * To tell where is the clock source:
+ * 0 = MAINPLL
+ * 1 = PERIPHPLL
+ */
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP		(1)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP		(1)
+
+/* Peripheral PLL */
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM			(1)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER			(79)
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC			(0)
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT		(1)
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT	(4)
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT		(4)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT		(9)
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK			(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK		(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK		(6249)
+/*
+ * To tell where is the clock source:
+ * 0 = F2S_PERIPH_REF_CLK
+ * 1 = MAIN_CLK
+ * 2 = PERIPH_CLK
+ */
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI			(1)
+
+/* SDRAM PLL */
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
+ * This if..else... is not required if generated by tools */
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(2)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(127)
+#else
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(31)
+#endif /* CONFIG_SOCFPGA_ARRIA5 */
+
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC			(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE		(4)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT		(5)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE		(0)
+
+/* Info for driver */
+#define CONFIG_HPS_CLK_OSC1_HZ			(25000000)
+#define CONFIG_HPS_CLK_MAINVCO_HZ		(1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ		(1000000000)
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* The if..else... is not required if generated by tools */
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(1066000000)
+#else
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(800000000)
+#endif
+#define CONFIG_HPS_CLK_EMAC0_HZ			(250000000)
+#define CONFIG_HPS_CLK_EMAC1_HZ			(250000000)
+#define CONFIG_HPS_CLK_USBCLK_HZ		(200000000)
+#define CONFIG_HPS_CLK_NAND_HZ			(50000000)
+#define CONFIG_HPS_CLK_SDMMC_HZ			(200000000)
+#define CONFIG_HPS_CLK_QSPI_HZ			(400000000)
+#define CONFIG_HPS_CLK_SPIM_HZ			(200000000)
+#define CONFIG_HPS_CLK_CAN0_HZ			(100000000)
+#define CONFIG_HPS_CLK_CAN1_HZ			(100000000)
+#define CONFIG_HPS_CLK_GPIODB_HZ		(32000)
+#define CONFIG_HPS_CLK_L4_MP_HZ			(100000000)
+#define CONFIG_HPS_CLK_L4_SP_HZ			(100000000)
+
+#endif /* _PRELOADER_PLL_CONFIG_H_ */
diff --git a/qemu/roms/u-boot/board/altera/socfpga/socfpga_cyclone5.c b/qemu/roms/u-boot/board/altera/socfpga/socfpga_cyclone5.c
new file mode 100644
index 000000000..a960eb600
--- /dev/null
+++ b/qemu/roms/u-boot/board/altera/socfpga/socfpga_cyclone5.c
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/io.h>
+
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+	puts("CPU   : Altera SOCFPGA Platform\n");
+	return 0;
+}
+#endif
+
+/*
+ * Print Board information
+ */
+int checkboard(void)
+{
+	puts("BOARD : Altera SOCFPGA Cyclone5 Board\n");
+	return 0;
+}
+
+/*
+ * Initialization function which happen at early stage of c code
+ */
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+	icache_enable();
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * DesignWare Ethernet initialization
+ */
+/* We know all the init functions have been run now */
+int board_eth_init(bd_t *bis)
+{
+	return 0;
+}