Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 201 insertions, 0 deletions

diff --git a/qemu/roms/u-boot/arch/microblaze/lib/board.c b/qemu/roms/u-boot/arch/microblaze/lib/board.c
new file mode 100644
index 000000000..600c80ab7
--- /dev/null
+++ b/qemu/roms/u-boot/arch/microblaze/lib/board.c
@@ -0,0 +1,201 @@
+/*
+ * (C) Copyright 2007 Michal Simek
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Michal  SIMEK <monstr@monstr.eu>
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <version.h>
+#include <watchdog.h>
+#include <stdio_dev.h>
+#include <serial.h>
+#include <net.h>
+#include <spi.h>
+#include <linux/compiler.h>
+#include <asm/processor.h>
+#include <asm/microblaze_intc.h>
+#include <fdtdec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static int display_banner(void)
+{
+	printf("\n\n%s\n\n", version_string);
+	return 0;
+}
+
+/*
+ * All attempts to come up with a "common" initialization sequence
+ * that works for all boards and architectures failed: some of the
+ * requirements are just _too_ different. To get rid of the resulting
+ * mess of board dependend #ifdef'ed code we now make the whole
+ * initialization sequence configurable to the user.
+ *
+ * The requirements for any new initalization function is simple: it
+ * receives a pointer to the "global data" structure as it's only
+ * argument, and returns an integer return code, where 0 means
+ * "continue" and != 0 means "fatal error, hang the system".
+ */
+typedef int (init_fnc_t) (void);
+
+init_fnc_t *init_sequence[] = {
+	env_init,
+#ifdef CONFIG_OF_CONTROL
+	fdtdec_check_fdt,
+#endif
+	serial_init,
+#ifndef CONFIG_SPL_BUILD
+	console_init_f,
+#endif
+	display_banner,
+#ifndef CONFIG_SPL_BUILD
+	interrupts_init,
+	timer_init,
+#endif
+	NULL,
+};
+
+unsigned long monitor_flash_len;
+
+void board_init_f(ulong not_used)
+{
+	bd_t *bd;
+	init_fnc_t **init_fnc_ptr;
+	gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
+	bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
+						- GENERATED_BD_INFO_SIZE);
+#if defined(CONFIG_CMD_FLASH) && !defined(CONFIG_SPL_BUILD)
+	ulong flash_size = 0;
+#endif
+	asm ("nop");	/* FIXME gd is not initialize - wait */
+	memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
+	memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
+	gd->bd = bd;
+	gd->baudrate = CONFIG_BAUDRATE;
+	bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
+
+	monitor_flash_len = __end - __text_start;
+
+#ifdef CONFIG_OF_EMBED
+	/* Get a pointer to the FDT */
+	gd->fdt_blob = __dtb_dt_begin;
+#elif defined CONFIG_OF_SEPARATE
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)__end;
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+	/* Allow the early environment to override the fdt address */
+	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+						(uintptr_t)gd->fdt_blob);
+#endif
+
+	/*
+	 * The Malloc area is immediately below the monitor copy in DRAM
+	 * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
+	 * as our monitory code is run from SDRAM
+	 */
+	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
+
+	serial_initialize();
+
+#ifdef CONFIG_XILINX_TB_WATCHDOG
+	hw_watchdog_init();
+#endif
+	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
+		WATCHDOG_RESET();
+		if ((*init_fnc_ptr) () != 0)
+			hang();
+	}
+
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_OF_CONTROL
+	/* For now, put this check after the console is ready */
+	if (fdtdec_prepare_fdt())
+		panic("** No FDT - please see doc/README.fdt-control");
+	else
+		printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
+#endif
+
+	puts("SDRAM :\n");
+	printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
+	printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
+	printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
+
+#if defined(CONFIG_CMD_FLASH)
+	puts("Flash: ");
+	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+	flash_size = flash_init();
+	if (bd->bi_flashstart && flash_size > 0) {
+# ifdef CONFIG_SYS_FLASH_CHECKSUM
+		print_size(flash_size, "");
+		/*
+		 * Compute and print flash CRC if flashchecksum is set to 'y'
+		 *
+		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+		 */
+		if (getenv_yesno("flashchecksum") == 1) {
+			printf("  CRC: %08X",
+			       crc32(0, (const u8 *)bd->bi_flashstart,
+				     flash_size)
+			);
+		}
+		putc('\n');
+# else	/* !CONFIG_SYS_FLASH_CHECKSUM */
+		print_size(flash_size, "\n");
+# endif /* CONFIG_SYS_FLASH_CHECKSUM */
+		bd->bi_flashsize = flash_size;
+		bd->bi_flashoffset = bd->bi_flashstart + flash_size;
+	} else {
+		puts("Flash init FAILED");
+		bd->bi_flashstart = 0;
+		bd->bi_flashsize = 0;
+		bd->bi_flashoffset = 0;
+	}
+#endif
+
+#ifdef CONFIG_SPI
+	spi_init();
+#endif
+
+	/* relocate environment function pointers etc. */
+	env_relocate();
+
+	/* Initialize stdio devices */
+	stdio_init();
+
+	/* Initialize the jump table for applications */
+	jumptable_init();
+
+	/* Initialize the console (after the relocation and devices init) */
+	console_init_r();
+
+	board_init();
+
+	/* Initialize from environment */
+	load_addr = getenv_ulong("loadaddr", 16, load_addr);
+
+#if defined(CONFIG_CMD_NET)
+	printf("Net:   ");
+	eth_initialize(gd->bd);
+
+	uchar enetaddr[6];
+	eth_getenv_enetaddr("ethaddr", enetaddr);
+	printf("MAC:   %pM\n", enetaddr);
+#endif
+
+	/* main_loop */
+	for (;;) {
+		WATCHDOG_RESET();
+		main_loop();
+	}
+#endif /* CONFIG_SPL_BUILD */
+}