diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/seabios/src/hw/usb-ehci.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/seabios/src/hw/usb-ehci.c')
-rw-r--r-- | qemu/roms/seabios/src/hw/usb-ehci.c | 648 |
1 files changed, 648 insertions, 0 deletions
diff --git a/qemu/roms/seabios/src/hw/usb-ehci.c b/qemu/roms/seabios/src/hw/usb-ehci.c new file mode 100644 index 000000000..41f8579ce --- /dev/null +++ b/qemu/roms/seabios/src/hw/usb-ehci.c @@ -0,0 +1,648 @@ +// Code for handling EHCI USB controllers. +// +// Copyright (C) 2010-2013 Kevin O'Connor <kevin@koconnor.net> +// +// This file may be distributed under the terms of the GNU LGPLv3 license. + +#include "biosvar.h" // GET_LOWFLAT +#include "config.h" // CONFIG_* +#include "output.h" // dprintf +#include "malloc.h" // free +#include "memmap.h" // PAGE_SIZE +#include "pci.h" // pci_bdf_to_bus +#include "pci_ids.h" // PCI_CLASS_SERIAL_USB_UHCI +#include "pci_regs.h" // PCI_BASE_ADDRESS_0 +#include "string.h" // memset +#include "usb.h" // struct usb_s +#include "usb-ehci.h" // struct ehci_qh +#include "util.h" // msleep +#include "x86.h" // readl + +struct usb_ehci_s { + struct usb_s usb; + struct ehci_caps *caps; + struct ehci_regs *regs; + struct ehci_qh *async_qh; + int checkports; +}; + +struct ehci_pipe { + struct ehci_qh qh; + struct ehci_qtd *next_td, *tds; + void *data; + struct usb_pipe pipe; +}; + +static int PendingEHCI; + + +/**************************************************************** + * Root hub + ****************************************************************/ + +#define EHCI_TIME_POSTPOWER 20 +#define EHCI_TIME_POSTRESET 2 + +// Check if device attached to port +static int +ehci_hub_detect(struct usbhub_s *hub, u32 port) +{ + struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); + u32 *portreg = &cntl->regs->portsc[port]; + u32 portsc = readl(portreg); + + if (!(portsc & PORT_CONNECT)) + // No device present + return 0; + + if ((portsc & PORT_LINESTATUS_MASK) == PORT_LINESTATUS_KSTATE) { + // low speed device + writel(portreg, portsc | PORT_OWNER); + return -1; + } + + // XXX - if just powered up, need to wait for USB_TIME_ATTDB? + + // Begin reset on port + portsc = (portsc & ~PORT_PE) | PORT_RESET; + writel(portreg, portsc); + msleep(USB_TIME_DRSTR); + return 1; +} + +// Reset device on port +static int +ehci_hub_reset(struct usbhub_s *hub, u32 port) +{ + struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); + u32 *portreg = &cntl->regs->portsc[port]; + u32 portsc = readl(portreg); + + // Finish reset on port + portsc &= ~PORT_RESET; + writel(portreg, portsc); + msleep(EHCI_TIME_POSTRESET); + + portsc = readl(portreg); + if (!(portsc & PORT_CONNECT)) + // No longer connected + return -1; + if (!(portsc & PORT_PE)) { + // full speed device + writel(portreg, portsc | PORT_OWNER); + return -1; + } + + return USB_HIGHSPEED; +} + +// Disable port +static void +ehci_hub_disconnect(struct usbhub_s *hub, u32 port) +{ + struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); + u32 *portreg = &cntl->regs->portsc[port]; + u32 portsc = readl(portreg); + writel(portreg, portsc & ~PORT_PE); +} + +static struct usbhub_op_s ehci_HubOp = { + .detect = ehci_hub_detect, + .reset = ehci_hub_reset, + .disconnect = ehci_hub_disconnect, +}; + +// Find any devices connected to the root hub. +static int +check_ehci_ports(struct usb_ehci_s *cntl) +{ + // Power up ports. + int i; + for (i=0; i<cntl->checkports; i++) { + u32 *portreg = &cntl->regs->portsc[i]; + u32 portsc = readl(portreg); + if (!(portsc & PORT_POWER)) { + portsc |= PORT_POWER; + writel(portreg, portsc); + } + } + msleep(EHCI_TIME_POSTPOWER); + + struct usbhub_s hub; + memset(&hub, 0, sizeof(hub)); + hub.cntl = &cntl->usb; + hub.portcount = cntl->checkports; + hub.op = &ehci_HubOp; + usb_enumerate(&hub); + return hub.devcount; +} + + +/**************************************************************** + * Setup + ****************************************************************/ + +// Wait for next USB async frame to start - for ensuring safe memory release. +static void +ehci_waittick(struct usb_ehci_s *cntl) +{ + if (MODE16) { + msleep(10); + return; + } + // Wait for access to "doorbell" + barrier(); + u32 cmd, sts; + u32 end = timer_calc(100); + for (;;) { + sts = readl(&cntl->regs->usbsts); + if (!(sts & STS_IAA)) { + cmd = readl(&cntl->regs->usbcmd); + if (!(cmd & CMD_IAAD)) + break; + } + if (timer_check(end)) { + warn_timeout(); + return; + } + yield(); + } + // Ring "doorbell" + writel(&cntl->regs->usbcmd, cmd | CMD_IAAD); + // Wait for completion + for (;;) { + sts = readl(&cntl->regs->usbsts); + if (sts & STS_IAA) + break; + if (timer_check(end)) { + warn_timeout(); + return; + } + yield(); + } + // Ack completion + writel(&cntl->regs->usbsts, STS_IAA); +} + +static void +ehci_free_pipes(struct usb_ehci_s *cntl) +{ + dprintf(7, "ehci_free_pipes %p\n", cntl); + + struct ehci_qh *start = cntl->async_qh; + struct ehci_qh *pos = start; + for (;;) { + struct ehci_qh *next = (void*)(pos->next & ~EHCI_PTR_BITS); + if (next == start) + break; + struct ehci_pipe *pipe = container_of(next, struct ehci_pipe, qh); + if (usb_is_freelist(&cntl->usb, &pipe->pipe)) + pos->next = next->next; + else + pos = next; + } + ehci_waittick(cntl); + for (;;) { + struct usb_pipe *usbpipe = cntl->usb.freelist; + if (!usbpipe) + break; + cntl->usb.freelist = usbpipe->freenext; + struct ehci_pipe *pipe = container_of(usbpipe, struct ehci_pipe, pipe); + free(pipe); + } +} + +static void +configure_ehci(void *data) +{ + struct usb_ehci_s *cntl = data; + + // Allocate ram for schedule storage + struct ehci_framelist *fl = memalign_high(sizeof(*fl), sizeof(*fl)); + struct ehci_qh *intr_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*intr_qh)); + struct ehci_qh *async_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*async_qh)); + if (!fl || !intr_qh || !async_qh) { + warn_noalloc(); + PendingEHCI--; + goto fail; + } + + // XXX - check for halted? + + // Reset the HC + u32 cmd = readl(&cntl->regs->usbcmd); + writel(&cntl->regs->usbcmd, (cmd & ~(CMD_ASE | CMD_PSE)) | CMD_HCRESET); + u32 end = timer_calc(250); + for (;;) { + cmd = readl(&cntl->regs->usbcmd); + if (!(cmd & CMD_HCRESET)) + break; + if (timer_check(end)) { + warn_timeout(); + PendingEHCI--; + goto fail; + } + yield(); + } + + // Disable interrupts (just to be safe). + writel(&cntl->regs->usbintr, 0); + + // Set schedule to point to primary intr queue head + memset(intr_qh, 0, sizeof(*intr_qh)); + intr_qh->next = EHCI_PTR_TERM; + intr_qh->info2 = (0x01 << QH_SMASK_SHIFT); + intr_qh->token = QTD_STS_HALT; + intr_qh->qtd_next = intr_qh->alt_next = EHCI_PTR_TERM; + int i; + for (i=0; i<ARRAY_SIZE(fl->links); i++) + fl->links[i] = (u32)intr_qh | EHCI_PTR_QH; + writel(&cntl->regs->periodiclistbase, (u32)fl); + + // Set async list to point to primary async queue head + memset(async_qh, 0, sizeof(*async_qh)); + async_qh->next = (u32)async_qh | EHCI_PTR_QH; + async_qh->info1 = QH_HEAD; + async_qh->token = QTD_STS_HALT; + async_qh->qtd_next = async_qh->alt_next = EHCI_PTR_TERM; + cntl->async_qh = async_qh; + writel(&cntl->regs->asynclistbase, (u32)async_qh); + + // Enable queues + writel(&cntl->regs->usbcmd, cmd | CMD_ASE | CMD_PSE | CMD_RUN); + + // Set default of high speed for root hub. + writel(&cntl->regs->configflag, 1); + PendingEHCI--; + + // Find devices + int count = check_ehci_ports(cntl); + ehci_free_pipes(cntl); + if (count) + // Success + return; + + // No devices found - shutdown and free controller. + writel(&cntl->regs->usbcmd, cmd & ~CMD_RUN); + msleep(4); // 2ms to stop reading memory - XXX +fail: + free(fl); + free(intr_qh); + free(async_qh); + free(cntl); +} + +static void +ehci_controller_setup(struct pci_device *pci) +{ + wait_preempt(); // Avoid pci_config_readl when preempting + u16 bdf = pci->bdf; + u32 baseaddr = pci_config_readl(bdf, PCI_BASE_ADDRESS_0); + struct ehci_caps *caps = (void*)(baseaddr & PCI_BASE_ADDRESS_MEM_MASK); + u32 hcc_params = readl(&caps->hccparams); + + struct usb_ehci_s *cntl = malloc_tmphigh(sizeof(*cntl)); + if (!cntl) { + warn_noalloc(); + return; + } + memset(cntl, 0, sizeof(*cntl)); + cntl->usb.pci = pci; + cntl->usb.type = USB_TYPE_EHCI; + cntl->caps = caps; + cntl->checkports = readl(&cntl->caps->hcsparams) & HCS_N_PORTS_MASK; + cntl->regs = (void*)caps + readb(&caps->caplength); + if (hcc_params & HCC_64BIT_ADDR) + cntl->regs->ctrldssegment = 0; + PendingEHCI++; + + dprintf(1, "EHCI init on dev %02x:%02x.%x (regs=%p)\n" + , pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf) + , pci_bdf_to_fn(bdf), cntl->regs); + + pci_config_maskw(bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER); + + // XXX - check for and disable SMM control? + + run_thread(configure_ehci, cntl); +} + +void +ehci_setup(void) +{ + if (! CONFIG_USB_EHCI) + return; + struct pci_device *pci; + foreachpci(pci) { + if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_EHCI) + ehci_controller_setup(pci); + } + + // Wait for all EHCI controllers to initialize. This forces OHCI/UHCI + // setup to always be after any EHCI ports are routed to EHCI. + while (PendingEHCI) + yield(); +} + + +/**************************************************************** + * End point communication + ****************************************************************/ + +// Setup fields in qh +static void +ehci_desc2pipe(struct ehci_pipe *pipe, struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) +{ + usb_desc2pipe(&pipe->pipe, usbdev, epdesc); + + pipe->qh.info1 = ((pipe->pipe.maxpacket << QH_MAXPACKET_SHIFT) + | (pipe->pipe.speed << QH_SPEED_SHIFT) + | (pipe->pipe.ep << QH_EP_SHIFT) + | (pipe->pipe.devaddr << QH_DEVADDR_SHIFT)); + + pipe->qh.info2 = (1 << QH_MULT_SHIFT); + struct usbdevice_s *hubdev = usbdev->hub->usbdev; + if (hubdev) { + struct ehci_pipe *hpipe = container_of( + hubdev->defpipe, struct ehci_pipe, pipe); + if (hpipe->pipe.speed == USB_HIGHSPEED) + pipe->qh.info2 |= (((usbdev->port+1) << QH_HUBPORT_SHIFT) + | (hpipe->pipe.devaddr << QH_HUBADDR_SHIFT)); + else + pipe->qh.info2 = hpipe->qh.info2; + } + + u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + if (eptype == USB_ENDPOINT_XFER_CONTROL) + pipe->qh.info1 |= ((pipe->pipe.speed != USB_HIGHSPEED ? QH_CONTROL : 0) + | QH_TOGGLECONTROL); + else if (eptype == USB_ENDPOINT_XFER_INT) + pipe->qh.info2 |= (0x01 << QH_SMASK_SHIFT) | (0x1c << QH_CMASK_SHIFT); +} + +static struct usb_pipe * +ehci_alloc_intr_pipe(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) +{ + struct usb_ehci_s *cntl = container_of( + usbdev->hub->cntl, struct usb_ehci_s, usb); + int frameexp = usb_get_period(usbdev, epdesc); + dprintf(7, "ehci_alloc_intr_pipe %p %d\n", &cntl->usb, frameexp); + + if (frameexp > 10) + frameexp = 10; + int maxpacket = epdesc->wMaxPacketSize; + // Determine number of entries needed for 2 timer ticks. + int ms = 1<<frameexp; + int count = DIV_ROUND_UP(ticks_to_ms(2), ms); + struct ehci_pipe *pipe = memalign_low(EHCI_QH_ALIGN, sizeof(*pipe)); + struct ehci_qtd *tds = memalign_low(EHCI_QTD_ALIGN, sizeof(*tds) * count); + void *data = malloc_low(maxpacket * count); + if (!pipe || !tds || !data) { + warn_noalloc(); + goto fail; + } + memset(pipe, 0, sizeof(*pipe)); + memset(tds, 0, sizeof(*tds) * count); + memset(data, 0, maxpacket * count); + ehci_desc2pipe(pipe, usbdev, epdesc); + pipe->next_td = pipe->tds = tds; + pipe->data = data; + pipe->qh.qtd_next = (u32)tds; + + int i; + for (i=0; i<count; i++) { + struct ehci_qtd *td = &tds[i]; + td->qtd_next = (i==count-1 ? (u32)tds : (u32)&td[1]); + td->alt_next = EHCI_PTR_TERM; + td->token = (ehci_explen(maxpacket) | QTD_STS_ACTIVE + | QTD_PID_IN | ehci_maxerr(3)); + td->buf[0] = (u32)data + maxpacket * i; + } + + // Add to interrupt schedule. + struct ehci_framelist *fl = (void*)readl(&cntl->regs->periodiclistbase); + if (frameexp == 0) { + // Add to existing interrupt entry. + struct ehci_qh *intr_qh = (void*)(fl->links[0] & ~EHCI_PTR_BITS); + pipe->qh.next = intr_qh->next; + barrier(); + intr_qh->next = (u32)&pipe->qh | EHCI_PTR_QH; + } else { + int startpos = 1<<(frameexp-1); + pipe->qh.next = fl->links[startpos]; + barrier(); + for (i=startpos; i<ARRAY_SIZE(fl->links); i+=ms) + fl->links[i] = (u32)&pipe->qh | EHCI_PTR_QH; + } + + return &pipe->pipe; +fail: + free(pipe); + free(tds); + free(data); + return NULL; +} + +struct usb_pipe * +ehci_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe + , struct usb_endpoint_descriptor *epdesc) +{ + if (! CONFIG_USB_EHCI) + return NULL; + usb_add_freelist(upipe); + if (!epdesc) + return NULL; + u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + if (eptype == USB_ENDPOINT_XFER_INT) + return ehci_alloc_intr_pipe(usbdev, epdesc); + struct usb_ehci_s *cntl = container_of( + usbdev->hub->cntl, struct usb_ehci_s, usb); + dprintf(7, "ehci_alloc_async_pipe %p %d\n", &cntl->usb, eptype); + + struct usb_pipe *usbpipe = usb_get_freelist(&cntl->usb, eptype); + if (usbpipe) { + // Use previously allocated pipe. + struct ehci_pipe *pipe = container_of(usbpipe, struct ehci_pipe, pipe); + ehci_desc2pipe(pipe, usbdev, epdesc); + return usbpipe; + } + + // Allocate a new queue head. + struct ehci_pipe *pipe; + if (eptype == USB_ENDPOINT_XFER_CONTROL) + pipe = memalign_tmphigh(EHCI_QH_ALIGN, sizeof(*pipe)); + else + pipe = memalign_low(EHCI_QH_ALIGN, sizeof(*pipe)); + if (!pipe) { + warn_noalloc(); + return NULL; + } + memset(pipe, 0, sizeof(*pipe)); + ehci_desc2pipe(pipe, usbdev, epdesc); + pipe->qh.qtd_next = pipe->qh.alt_next = EHCI_PTR_TERM; + + // Add queue head to controller list. + struct ehci_qh *async_qh = cntl->async_qh; + pipe->qh.next = async_qh->next; + barrier(); + async_qh->next = (u32)&pipe->qh | EHCI_PTR_QH; + return &pipe->pipe; +} + +static void +ehci_reset_pipe(struct ehci_pipe *pipe) +{ + SET_LOWFLAT(pipe->qh.qtd_next, EHCI_PTR_TERM); + SET_LOWFLAT(pipe->qh.alt_next, EHCI_PTR_TERM); + barrier(); + SET_LOWFLAT(pipe->qh.token, GET_LOWFLAT(pipe->qh.token) & QTD_TOGGLE); +} + +static int +ehci_wait_td(struct ehci_pipe *pipe, struct ehci_qtd *td, u32 end) +{ + u32 status; + for (;;) { + status = td->token; + if (!(status & QTD_STS_ACTIVE)) + break; + if (timer_check(end)) { + u32 cur = GET_LOWFLAT(pipe->qh.current); + u32 tok = GET_LOWFLAT(pipe->qh.token); + u32 next = GET_LOWFLAT(pipe->qh.qtd_next); + warn_timeout(); + dprintf(1, "ehci pipe=%p cur=%08x tok=%08x next=%x td=%p status=%x\n" + , pipe, cur, tok, next, td, status); + ehci_reset_pipe(pipe); + struct usb_ehci_s *cntl = container_of( + GET_LOWFLAT(pipe->pipe.cntl), struct usb_ehci_s, usb); + ehci_waittick(cntl); + return -1; + } + yield(); + } + if (status & QTD_STS_HALT) { + dprintf(1, "ehci_wait_td error - status=%x\n", status); + ehci_reset_pipe(pipe); + return -2; + } + return 0; +} + +static void +ehci_fill_tdbuf(struct ehci_qtd *td, u32 dest, int transfer) +{ + u32 *pos = td->buf, end = dest + transfer; + for (; dest < end; dest = ALIGN_DOWN(dest + PAGE_SIZE, PAGE_SIZE)) + *pos++ = dest; +} + +#define STACKQTDS 6 + +int +ehci_send_pipe(struct usb_pipe *p, int dir, const void *cmd + , void *data, int datasize) +{ + if (! CONFIG_USB_EHCI) + return -1; + struct ehci_pipe *pipe = container_of(p, struct ehci_pipe, pipe); + dprintf(7, "ehci_send_pipe qh=%p dir=%d data=%p size=%d\n" + , &pipe->qh, dir, data, datasize); + + // Allocate tds on stack (with required alignment) + u8 tdsbuf[sizeof(struct ehci_qtd) * STACKQTDS + EHCI_QTD_ALIGN - 1]; + struct ehci_qtd *tds = (void*)ALIGN((u32)tdsbuf, EHCI_QTD_ALIGN), *td = tds; + memset(tds, 0, sizeof(*tds) * STACKQTDS); + + // Setup transfer descriptors + u16 maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); + u32 toggle = 0; + if (cmd) { + // Send setup pid on control transfers + td->qtd_next = (u32)MAKE_FLATPTR(GET_SEG(SS), td+1); + td->alt_next = EHCI_PTR_TERM; + td->token = (ehci_explen(USB_CONTROL_SETUP_SIZE) | QTD_STS_ACTIVE + | QTD_PID_SETUP | ehci_maxerr(3)); + ehci_fill_tdbuf(td, (u32)cmd, USB_CONTROL_SETUP_SIZE); + td++; + toggle = QTD_TOGGLE; + } + u32 dest = (u32)data, dataend = dest + datasize; + while (dest < dataend) { + // Send data pids + if (td >= &tds[STACKQTDS]) { + warn_noalloc(); + return -1; + } + int maxtransfer = 5*PAGE_SIZE - (dest & (PAGE_SIZE-1)); + int transfer = dataend - dest; + if (transfer > maxtransfer) + transfer = ALIGN_DOWN(maxtransfer, maxpacket); + td->qtd_next = (u32)MAKE_FLATPTR(GET_SEG(SS), td+1); + td->alt_next = EHCI_PTR_TERM; + td->token = (ehci_explen(transfer) | toggle | QTD_STS_ACTIVE + | (dir ? QTD_PID_IN : QTD_PID_OUT) | ehci_maxerr(3)); + ehci_fill_tdbuf(td, dest, transfer); + td++; + dest += transfer; + } + if (cmd) { + // Send status pid on control transfers + if (td >= &tds[STACKQTDS]) { + warn_noalloc(); + return -1; + } + td->qtd_next = EHCI_PTR_TERM; + td->alt_next = EHCI_PTR_TERM; + td->token = (QTD_TOGGLE | QTD_STS_ACTIVE + | (dir ? QTD_PID_OUT : QTD_PID_IN) | ehci_maxerr(3)); + td++; + } + + // Transfer data + (td-1)->qtd_next = EHCI_PTR_TERM; + barrier(); + SET_LOWFLAT(pipe->qh.qtd_next, (u32)MAKE_FLATPTR(GET_SEG(SS), tds)); + u32 end = timer_calc(usb_xfer_time(p, datasize)); + int i; + for (i=0, td=tds; i<STACKQTDS; i++, td++) { + int ret = ehci_wait_td(pipe, td, end); + if (ret) + return -1; + } + + return 0; +} + +int +ehci_poll_intr(struct usb_pipe *p, void *data) +{ + ASSERT16(); + if (! CONFIG_USB_EHCI) + return -1; + struct ehci_pipe *pipe = container_of(p, struct ehci_pipe, pipe); + struct ehci_qtd *td = GET_LOWFLAT(pipe->next_td); + u32 token = GET_LOWFLAT(td->token); + if (token & QTD_STS_ACTIVE) + // No intrs found. + return -1; + // XXX - check for errors. + + // Copy data. + int maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); + int pos = td - GET_LOWFLAT(pipe->tds); + void *tddata = GET_LOWFLAT(pipe->data) + maxpacket * pos; + memcpy_far(GET_SEG(SS), data, SEG_LOW, LOWFLAT2LOW(tddata), maxpacket); + + // Reenable this td. + struct ehci_qtd *next = (void*)(GET_LOWFLAT(td->qtd_next) & ~EHCI_PTR_BITS); + SET_LOWFLAT(pipe->next_td, next); + SET_LOWFLAT(td->buf[0], (u32)tddata); + barrier(); + SET_LOWFLAT(td->token, (ehci_explen(maxpacket) | QTD_STS_ACTIVE + | QTD_PID_IN | ehci_maxerr(3))); + + return 0; +} |