diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/seabios/src/hw/ata.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/seabios/src/hw/ata.c')
-rw-r--r-- | qemu/roms/seabios/src/hw/ata.c | 1043 |
1 files changed, 1043 insertions, 0 deletions
diff --git a/qemu/roms/seabios/src/hw/ata.c b/qemu/roms/seabios/src/hw/ata.c new file mode 100644 index 000000000..d805706dd --- /dev/null +++ b/qemu/roms/seabios/src/hw/ata.c @@ -0,0 +1,1043 @@ +// Low level ATA disk access +// +// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> +// Copyright (C) 2002 MandrakeSoft S.A. +// +// This file may be distributed under the terms of the GNU LGPLv3 license. + +#include "ata.h" // ATA_CB_STAT +#include "biosvar.h" // GET_GLOBALFLAT +#include "block.h" // struct drive_s +#include "blockcmd.h" // CDB_CMD_READ_10 +#include "byteorder.h" // be16_to_cpu +#include "malloc.h" // malloc_fseg +#include "output.h" // dprintf +#include "pci.h" // foreachpci +#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER +#include "pci_regs.h" // PCI_INTERRUPT_LINE +#include "pic.h" // enable_hwirq +#include "stacks.h" // yield +#include "std/disk.h" // DISK_RET_SUCCESS +#include "string.h" // memset +#include "util.h" // timer_calc +#include "x86.h" // inb + +#define IDE_TIMEOUT 32000 //32 seconds max for IDE ops + + +/**************************************************************** + * Helper functions + ****************************************************************/ + +// Wait for the specified ide state +static inline int +await_ide(u8 mask, u8 flags, u16 base, u16 timeout) +{ + u32 end = timer_calc(timeout); + for (;;) { + u8 status = inb(base+ATA_CB_STAT); + if ((status & mask) == flags) + return status; + if (timer_check(end)) { + warn_timeout(); + return -1; + } + yield(); + } +} + +// Wait for the device to be not-busy. +static int +await_not_bsy(u16 base) +{ + return await_ide(ATA_CB_STAT_BSY, 0, base, IDE_TIMEOUT); +} + +// Wait for the device to be ready. +static int +await_rdy(u16 base) +{ + return await_ide(ATA_CB_STAT_RDY, ATA_CB_STAT_RDY, base, IDE_TIMEOUT); +} + +// Wait for ide state - pauses for one ata cycle first. +static inline int +pause_await_not_bsy(u16 iobase1, u16 iobase2) +{ + // Wait one PIO transfer cycle. + inb(iobase2 + ATA_CB_ASTAT); + + return await_not_bsy(iobase1); +} + +// Wait for ide state - pause for 400ns first. +static inline int +ndelay_await_not_bsy(u16 iobase1) +{ + ndelay(400); + return await_not_bsy(iobase1); +} + +// Reset a drive +static void +ata_reset(struct atadrive_s *adrive_gf) +{ + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u8 slave = GET_GLOBALFLAT(adrive_gf->slave); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + + dprintf(6, "ata_reset drive=%p\n", &adrive_gf->drive); + // Pulse SRST + outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC); + udelay(5); + outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC); + msleep(2); + + // wait for device to become not busy. + int status = await_not_bsy(iobase1); + if (status < 0) + goto done; + if (slave) { + // Change device. + u32 end = timer_calc(IDE_TIMEOUT); + for (;;) { + outb(ATA_CB_DH_DEV1, iobase1 + ATA_CB_DH); + status = ndelay_await_not_bsy(iobase1); + if (status < 0) + goto done; + if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1) + break; + // Change drive request failed to take effect - retry. + if (timer_check(end)) { + warn_timeout(); + goto done; + } + } + } else { + // QEMU doesn't reset dh on reset, so set it explicitly. + outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH); + } + + // On a user-reset request, wait for RDY if it is an ATA device. + u8 type=GET_GLOBALFLAT(adrive_gf->drive.type); + if (type == DTYPE_ATA) + status = await_rdy(iobase1); + +done: + // Enable interrupts + outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); + + dprintf(6, "ata_reset exit status=%x\n", status); +} + +// Check for drive RDY for 16bit interface command. +static int +isready(struct atadrive_s *adrive_gf) +{ + // Read the status from controller + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u8 status = inb(iobase1 + ATA_CB_STAT); + if ((status & (ATA_CB_STAT_BSY|ATA_CB_STAT_RDY)) == ATA_CB_STAT_RDY) + return DISK_RET_SUCCESS; + return DISK_RET_ENOTREADY; +} + + +/**************************************************************** + * ATA send command + ****************************************************************/ + +struct ata_pio_command { + u8 feature; + u8 sector_count; + u8 lba_low; + u8 lba_mid; + u8 lba_high; + u8 device; + u8 command; + + u8 feature2; + u8 sector_count2; + u8 lba_low2; + u8 lba_mid2; + u8 lba_high2; +}; + +// Send an ata command to the drive. +static int +send_cmd(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd) +{ + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u8 slave = GET_GLOBALFLAT(adrive_gf->slave); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + + // Select device + int status = await_not_bsy(iobase1); + if (status < 0) + return status; + u8 newdh = ((cmd->device & ~ATA_CB_DH_DEV1) + | (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0)); + u8 olddh = inb(iobase1 + ATA_CB_DH); + outb(newdh, iobase1 + ATA_CB_DH); + if ((olddh ^ newdh) & (1<<4)) { + // Was a device change - wait for device to become not busy. + status = ndelay_await_not_bsy(iobase1); + if (status < 0) + return status; + } + + // Check for ATA_CMD_(READ|WRITE)_(SECTORS|DMA)_EXT commands. + if ((cmd->command & ~0x11) == ATA_CMD_READ_SECTORS_EXT) { + outb(cmd->feature2, iobase1 + ATA_CB_FR); + outb(cmd->sector_count2, iobase1 + ATA_CB_SC); + outb(cmd->lba_low2, iobase1 + ATA_CB_SN); + outb(cmd->lba_mid2, iobase1 + ATA_CB_CL); + outb(cmd->lba_high2, iobase1 + ATA_CB_CH); + } + outb(cmd->feature, iobase1 + ATA_CB_FR); + outb(cmd->sector_count, iobase1 + ATA_CB_SC); + outb(cmd->lba_low, iobase1 + ATA_CB_SN); + outb(cmd->lba_mid, iobase1 + ATA_CB_CL); + outb(cmd->lba_high, iobase1 + ATA_CB_CH); + outb(cmd->command, iobase1 + ATA_CB_CMD); + + return 0; +} + +// Wait for data after calling 'send_cmd'. +static int +ata_wait_data(u16 iobase1) +{ + int status = ndelay_await_not_bsy(iobase1); + if (status < 0) + return status; + + if (status & ATA_CB_STAT_ERR) { + dprintf(6, "send_cmd : read error (status=%02x err=%02x)\n" + , status, inb(iobase1 + ATA_CB_ERR)); + return -4; + } + if (!(status & ATA_CB_STAT_DRQ)) { + dprintf(6, "send_cmd : DRQ not set (status %02x)\n", status); + return -5; + } + + return 0; +} + +// Send an ata command that does not transfer any further data. +int +ata_cmd_nondata(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd) +{ + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + + // Disable interrupts + outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); + + int ret = send_cmd(adrive_gf, cmd); + if (ret) + goto fail; + ret = ndelay_await_not_bsy(iobase1); + if (ret < 0) + goto fail; + + if (ret & ATA_CB_STAT_ERR) { + dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n" + , ret, inb(iobase1 + ATA_CB_ERR)); + ret = -4; + goto fail; + } + if (ret & ATA_CB_STAT_DRQ) { + dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret); + ret = -5; + goto fail; + } + +fail: + // Enable interrupts + outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); + + return ret; +} + + +/**************************************************************** + * ATA PIO transfers + ****************************************************************/ + +// Transfer 'op->count' blocks (of 'blocksize' bytes) to/from drive +// 'op->drive_gf'. +static int +ata_pio_transfer(struct disk_op_s *op, int iswrite, int blocksize) +{ + dprintf(16, "ata_pio_transfer id=%p write=%d count=%d bs=%d buf=%p\n" + , op->drive_gf, iswrite, op->count, blocksize, op->buf_fl); + + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + int count = op->count; + void *buf_fl = op->buf_fl; + int status; + for (;;) { + if (iswrite) { + // Write data to controller + dprintf(16, "Write sector id=%p dest=%p\n", op->drive_gf, buf_fl); + if (CONFIG_ATA_PIO32) + outsl_fl(iobase1, buf_fl, blocksize / 4); + else + outsw_fl(iobase1, buf_fl, blocksize / 2); + } else { + // Read data from controller + dprintf(16, "Read sector id=%p dest=%p\n", op->drive_gf, buf_fl); + if (CONFIG_ATA_PIO32) + insl_fl(iobase1, buf_fl, blocksize / 4); + else + insw_fl(iobase1, buf_fl, blocksize / 2); + } + buf_fl += blocksize; + + status = pause_await_not_bsy(iobase1, iobase2); + if (status < 0) { + // Error + op->count -= count; + return status; + } + + count--; + if (!count) + break; + status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR); + if (status != ATA_CB_STAT_DRQ) { + dprintf(6, "ata_pio_transfer : more sectors left (status %02x)\n" + , status); + op->count -= count; + return -6; + } + } + + status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ + | ATA_CB_STAT_ERR); + if (!iswrite) + status &= ~ATA_CB_STAT_DF; + if (status != 0) { + dprintf(6, "ata_pio_transfer : no sectors left (status %02x)\n", status); + return -7; + } + + return 0; +} + + +/**************************************************************** + * ATA DMA transfers + ****************************************************************/ + +#define BM_CMD 0 +#define BM_CMD_MEMWRITE 0x08 +#define BM_CMD_START 0x01 +#define BM_STATUS 2 +#define BM_STATUS_IRQ 0x04 +#define BM_STATUS_ERROR 0x02 +#define BM_STATUS_ACTIVE 0x01 +#define BM_TABLE 4 + +struct sff_dma_prd { + u32 buf_fl; + u32 count; +}; + +// Check if DMA available and setup transfer if so. +static int +ata_try_dma(struct disk_op_s *op, int iswrite, int blocksize) +{ + ASSERT16(); + if (! CONFIG_ATA_DMA) + return -1; + u32 dest = (u32)op->buf_fl; + if (dest & 1) + // Need minimum alignment of 1. + return -1; + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); + if (! iomaster) + return -1; + u32 bytes = op->count * blocksize; + if (! bytes) + return -1; + + // Build PRD dma structure. + struct sff_dma_prd *dma = MAKE_FLATPTR(SEG_LOW, ExtraStack); + struct sff_dma_prd *origdma = dma; + while (bytes) { + if (dma >= &origdma[16]) + // Too many descriptors.. + return -1; + u32 count = bytes; + u32 max = 0x10000 - (dest & 0xffff); + if (count > max) + count = max; + + SET_LOWFLAT(dma->buf_fl, dest); + bytes -= count; + if (!bytes) + // Last descriptor. + count |= 1<<31; + dprintf(16, "dma@%p: %08x %08x\n", dma, dest, count); + dest += count; + SET_LOWFLAT(dma->count, count); + dma++; + } + + // Program bus-master controller. + outl((u32)origdma, iomaster + BM_TABLE); + u8 oldcmd = inb(iomaster + BM_CMD) & ~(BM_CMD_MEMWRITE|BM_CMD_START); + outb(oldcmd | (iswrite ? 0x00 : BM_CMD_MEMWRITE), iomaster + BM_CMD); + outb(BM_STATUS_ERROR|BM_STATUS_IRQ, iomaster + BM_STATUS); + + return 0; +} + +// Transfer data using DMA. +static int +ata_dma_transfer(struct disk_op_s *op) +{ + if (! CONFIG_ATA_DMA) + return -1; + dprintf(16, "ata_dma_transfer id=%p buf=%p\n", op->drive_gf, op->buf_fl); + + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); + + // Start bus-master controller. + u8 oldcmd = inb(iomaster + BM_CMD); + outb(oldcmd | BM_CMD_START, iomaster + BM_CMD); + + u32 end = timer_calc(IDE_TIMEOUT); + u8 status; + for (;;) { + status = inb(iomaster + BM_STATUS); + if (status & BM_STATUS_IRQ) + break; + // Transfer in progress + if (timer_check(end)) { + // Timeout. + warn_timeout(); + break; + } + yield(); + } + outb(oldcmd & ~BM_CMD_START, iomaster + BM_CMD); + + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + int idestatus = pause_await_not_bsy(iobase1, iobase2); + + if ((status & (BM_STATUS_IRQ|BM_STATUS_ACTIVE)) == BM_STATUS_IRQ + && idestatus >= 0x00 + && (idestatus & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ + | ATA_CB_STAT_ERR)) == 0x00) + // Success. + return 0; + + dprintf(6, "IDE DMA error (dma=%x ide=%x/%x/%x)\n", status, idestatus + , inb(iobase2 + ATA_CB_ASTAT), inb(iobase1 + ATA_CB_ERR)); + return -1; +} + + +/**************************************************************** + * ATA hard drive functions + ****************************************************************/ + +// Transfer data to harddrive using PIO protocol. +static int +ata_pio_cmd_data(struct disk_op_s *op, int iswrite, struct ata_pio_command *cmd) +{ + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + + // Disable interrupts + outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); + + int ret = send_cmd(adrive_gf, cmd); + if (ret) + goto fail; + ret = ata_wait_data(iobase1); + if (ret) + goto fail; + ret = ata_pio_transfer(op, iswrite, DISK_SECTOR_SIZE); + +fail: + // Enable interrupts + outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); + return ret; +} + +// Transfer data to harddrive using DMA protocol. +static int +ata_dma_cmd_data(struct disk_op_s *op, struct ata_pio_command *cmd) +{ + if (! CONFIG_ATA_DMA) + return -1; + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + int ret = send_cmd(adrive_gf, cmd); + if (ret) + return ret; + return ata_dma_transfer(op); +} + +// Read/write count blocks from a harddrive. +static int +ata_readwrite(struct disk_op_s *op, int iswrite) +{ + u64 lba = op->lba; + + int usepio = ata_try_dma(op, iswrite, DISK_SECTOR_SIZE); + + struct ata_pio_command cmd; + memset(&cmd, 0, sizeof(cmd)); + + if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { + cmd.sector_count2 = op->count >> 8; + cmd.lba_low2 = lba >> 24; + cmd.lba_mid2 = lba >> 32; + cmd.lba_high2 = lba >> 40; + lba &= 0xffffff; + + if (usepio) + cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS_EXT + : ATA_CMD_READ_SECTORS_EXT); + else + cmd.command = (iswrite ? ATA_CMD_WRITE_DMA_EXT + : ATA_CMD_READ_DMA_EXT); + } else { + if (usepio) + cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS + : ATA_CMD_READ_SECTORS); + else + cmd.command = (iswrite ? ATA_CMD_WRITE_DMA + : ATA_CMD_READ_DMA); + } + + cmd.sector_count = op->count; + cmd.lba_low = lba; + cmd.lba_mid = lba >> 8; + cmd.lba_high = lba >> 16; + cmd.device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA; + + int ret; + if (usepio) + ret = ata_pio_cmd_data(op, iswrite, &cmd); + else + ret = ata_dma_cmd_data(op, &cmd); + if (ret) + return DISK_RET_EBADTRACK; + return DISK_RET_SUCCESS; +} + +// 16bit command demuxer for ATA harddrives. +int +process_ata_op(struct disk_op_s *op) +{ + if (!CONFIG_ATA) + return 0; + + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + switch (op->command) { + case CMD_READ: + return ata_readwrite(op, 0); + case CMD_WRITE: + return ata_readwrite(op, 1); + case CMD_RESET: + ata_reset(adrive_gf); + return DISK_RET_SUCCESS; + case CMD_ISREADY: + return isready(adrive_gf); + case CMD_FORMAT: + case CMD_VERIFY: + case CMD_SEEK: + return DISK_RET_SUCCESS; + default: + return DISK_RET_EPARAM; + } +} + + +/**************************************************************** + * ATAPI functions + ****************************************************************/ + +#define CDROM_CDB_SIZE 12 + +// Low-level atapi command transmit function. +int +atapi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize) +{ + if (! CONFIG_ATA) + return 0; + + struct atadrive_s *adrive_gf = container_of( + op->drive_gf, struct atadrive_s, drive); + struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); + u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); + u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); + + struct ata_pio_command cmd; + memset(&cmd, 0, sizeof(cmd)); + cmd.lba_mid = blocksize; + cmd.lba_high = blocksize >> 8; + cmd.command = ATA_CMD_PACKET; + + // Disable interrupts + outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); + + int ret = send_cmd(adrive_gf, &cmd); + if (ret) + goto fail; + ret = ata_wait_data(iobase1); + if (ret) + goto fail; + + // Send command to device + outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2); + + int status = pause_await_not_bsy(iobase1, iobase2); + if (status < 0) { + ret = status; + goto fail; + } + + if (status & ATA_CB_STAT_ERR) { + u8 err = inb(iobase1 + ATA_CB_ERR); + // skip "Not Ready" + if (err != 0x20) + dprintf(6, "send_atapi_cmd : read error (status=%02x err=%02x)\n" + , status, err); + ret = -2; + goto fail; + } + if (blocksize) { + if (!(status & ATA_CB_STAT_DRQ)) { + dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status); + ret = -3; + goto fail; + } + + ret = ata_pio_transfer(op, 0, blocksize); + } + +fail: + // Enable interrupts + outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); + if (ret) + return DISK_RET_EBADTRACK; + return DISK_RET_SUCCESS; +} + + +/**************************************************************** + * ATA detect and init + ****************************************************************/ + +// Send an identify device or identify device packet command. +static int +send_ata_identity(struct atadrive_s *adrive, u16 *buffer, int command) +{ + memset(buffer, 0, DISK_SECTOR_SIZE); + + struct disk_op_s dop; + memset(&dop, 0, sizeof(dop)); + dop.drive_gf = &adrive->drive; + dop.count = 1; + dop.lba = 1; + dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer); + + struct ata_pio_command cmd; + memset(&cmd, 0, sizeof(cmd)); + cmd.command = command; + + return ata_pio_cmd_data(&dop, 0, &cmd); +} + +// Extract the ATA/ATAPI version info. +int +ata_extract_version(u16 *buffer) +{ + // Extract ATA/ATAPI version. + u16 ataversion = buffer[80]; + u8 version; + for (version=15; version>0; version--) + if (ataversion & (1<<version)) + break; + return version; +} + +#define MAXMODEL 40 + +// Extract the ATA/ATAPI model info. +char * +ata_extract_model(char *model, u32 size, u16 *buffer) +{ + // Read model name + int i; + for (i=0; i<size/2; i++) + *(u16*)&model[i*2] = be16_to_cpu(buffer[27+i]); + model[size] = 0x00; + nullTrailingSpace(model); + return model; +} + +// Common init code between ata and atapi +static struct atadrive_s * +init_atadrive(struct atadrive_s *dummy, u16 *buffer) +{ + struct atadrive_s *adrive = malloc_fseg(sizeof(*adrive)); + if (!adrive) { + warn_noalloc(); + return NULL; + } + memset(adrive, 0, sizeof(*adrive)); + adrive->chan_gf = dummy->chan_gf; + adrive->slave = dummy->slave; + adrive->drive.cntl_id = adrive->chan_gf->chanid * 2 + dummy->slave; + adrive->drive.removable = (buffer[0] & 0x80) ? 1 : 0; + return adrive; +} + +// Detect if the given drive is an atapi - initialize it if so. +static struct atadrive_s * +init_drive_atapi(struct atadrive_s *dummy, u16 *buffer) +{ + // Send an IDENTIFY_DEVICE_PACKET command to device + int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_PACKET_DEVICE); + if (ret) + return NULL; + + // Success - setup as ATAPI. + struct atadrive_s *adrive = init_atadrive(dummy, buffer); + if (!adrive) + return NULL; + adrive->drive.type = DTYPE_ATA_ATAPI; + adrive->drive.blksize = CDROM_SECTOR_SIZE; + adrive->drive.sectors = (u64)-1; + u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; + char model[MAXMODEL+1]; + char *desc = znprintf(MAXDESCSIZE + , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]" + , adrive->chan_gf->chanid, adrive->slave + , ata_extract_model(model, MAXMODEL, buffer) + , ata_extract_version(buffer) + , (iscd ? "DVD/CD" : "Device")); + dprintf(1, "%s\n", desc); + + // fill cdidmap + if (iscd) { + int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, + adrive->chan_gf->chanid, + adrive->slave); + boot_add_cd(&adrive->drive, desc, prio); + } + + return adrive; +} + +// Detect if the given drive is a regular ata drive - initialize it if so. +static struct atadrive_s * +init_drive_ata(struct atadrive_s *dummy, u16 *buffer) +{ + // Send an IDENTIFY_DEVICE command to device + int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_DEVICE); + if (ret) + return NULL; + + // Success - setup as ATA. + struct atadrive_s *adrive = init_atadrive(dummy, buffer); + if (!adrive) + return NULL; + adrive->drive.type = DTYPE_ATA; + adrive->drive.blksize = DISK_SECTOR_SIZE; + + adrive->drive.pchs.cylinder = buffer[1]; + adrive->drive.pchs.head = buffer[3]; + adrive->drive.pchs.sector = buffer[6]; + + u64 sectors; + if (buffer[83] & (1 << 10)) // word 83 - lba48 support + sectors = *(u64*)&buffer[100]; // word 100-103 + else + sectors = *(u32*)&buffer[60]; // word 60 and word 61 + adrive->drive.sectors = sectors; + u64 adjsize = sectors >> 11; + char adjprefix = 'M'; + if (adjsize >= (1 << 16)) { + adjsize >>= 10; + adjprefix = 'G'; + } + char model[MAXMODEL+1]; + char *desc = znprintf(MAXDESCSIZE + , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)" + , adrive->chan_gf->chanid, adrive->slave + , ata_extract_model(model, MAXMODEL, buffer) + , ata_extract_version(buffer) + , (u32)adjsize, adjprefix); + dprintf(1, "%s\n", desc); + + int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, + adrive->chan_gf->chanid, + adrive->slave); + // Register with bcv system. + boot_add_hd(&adrive->drive, desc, prio); + + return adrive; +} + +static u32 SpinupEnd; + +// Wait for non-busy status and check for "floating bus" condition. +static int +powerup_await_non_bsy(u16 base) +{ + u8 orstatus = 0; + u8 status; + for (;;) { + status = inb(base+ATA_CB_STAT); + if (!(status & ATA_CB_STAT_BSY)) + break; + orstatus |= status; + if (orstatus == 0xff) { + dprintf(4, "powerup IDE floating\n"); + return orstatus; + } + if (timer_check(SpinupEnd)) { + warn_timeout(); + return -1; + } + yield(); + } + dprintf(6, "powerup iobase=%x st=%x\n", base, status); + return status; +} + +// Detect any drives attached to a given controller. +static void +ata_detect(void *data) +{ + struct ata_channel_s *chan_gf = data; + struct atadrive_s dummy; + memset(&dummy, 0, sizeof(dummy)); + dummy.chan_gf = chan_gf; + // Device detection + int didreset = 0; + u8 slave; + for (slave=0; slave<=1; slave++) { + // Wait for not-bsy. + u16 iobase1 = chan_gf->iobase1; + int status = powerup_await_non_bsy(iobase1); + if (status < 0) + continue; + u8 newdh = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0; + outb(newdh, iobase1+ATA_CB_DH); + ndelay(400); + status = powerup_await_non_bsy(iobase1); + if (status < 0) + continue; + + // Check if ioport registers look valid. + outb(newdh, iobase1+ATA_CB_DH); + u8 dh = inb(iobase1+ATA_CB_DH); + outb(0x55, iobase1+ATA_CB_SC); + outb(0xaa, iobase1+ATA_CB_SN); + u8 sc = inb(iobase1+ATA_CB_SC); + u8 sn = inb(iobase1+ATA_CB_SN); + dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n" + , chan_gf->chanid, slave, sc, sn, dh); + if (sc != 0x55 || sn != 0xaa || dh != newdh) + continue; + + // Prepare new drive. + dummy.slave = slave; + + // reset the channel + if (!didreset) { + ata_reset(&dummy); + didreset = 1; + } + + // check for ATAPI + u16 buffer[256]; + struct atadrive_s *adrive = init_drive_atapi(&dummy, buffer); + if (!adrive) { + // Didn't find an ATAPI drive - look for ATA drive. + u8 st = inb(iobase1+ATA_CB_STAT); + if (!st) + // Status not set - can't be a valid drive. + continue; + + // Wait for RDY. + int ret = await_rdy(iobase1); + if (ret < 0) + continue; + + // check for ATA. + adrive = init_drive_ata(&dummy, buffer); + if (!adrive) + // No ATA drive found + continue; + } + + u16 resetresult = buffer[93]; + dprintf(6, "ata_detect resetresult=%04x\n", resetresult); + if (!slave && (resetresult & 0xdf61) == 0x4041) + // resetresult looks valid and device 0 is responding to + // device 1 requests - device 1 must not be present - skip + // detection. + break; + } +} + +// Initialize an ata controller and detect its drives. +static void +init_controller(struct pci_device *pci, int irq + , u32 port1, u32 port2, u32 master) +{ + static int chanid = 0; + struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf)); + if (!chan_gf) { + warn_noalloc(); + return; + } + chan_gf->chanid = chanid++; + chan_gf->irq = irq; + chan_gf->pci_bdf = pci ? pci->bdf : -1; + chan_gf->pci_tmp = pci; + chan_gf->iobase1 = port1; + chan_gf->iobase2 = port2; + chan_gf->iomaster = master; + dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n" + , chanid, port1, port2, master, irq, chan_gf->pci_bdf); + run_thread(ata_detect, chan_gf); +} + +#define IRQ_ATA1 14 +#define IRQ_ATA2 15 + +// Handle controllers on an ATA PCI device. +static void +init_pciata(struct pci_device *pci, u8 prog_if) +{ + pci->have_driver = 1; + u16 bdf = pci->bdf; + u8 pciirq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); + int master = 0; + if (CONFIG_ATA_DMA && prog_if & 0x80) { + // Check for bus-mastering. + u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_4); + if (bar & PCI_BASE_ADDRESS_SPACE_IO) { + master = bar & PCI_BASE_ADDRESS_IO_MASK; + pci_config_maskw(bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER); + } + } + + u32 port1, port2, irq; + if (prog_if & 1) { + port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_0) + & PCI_BASE_ADDRESS_IO_MASK); + port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_1) + & PCI_BASE_ADDRESS_IO_MASK); + irq = pciirq; + } else { + port1 = PORT_ATA1_CMD_BASE; + port2 = PORT_ATA1_CTRL_BASE; + irq = IRQ_ATA1; + } + init_controller(pci, irq, port1, port2, master); + + if (prog_if & 4) { + port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_2) + & PCI_BASE_ADDRESS_IO_MASK); + port2 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_3) + & PCI_BASE_ADDRESS_IO_MASK); + irq = pciirq; + } else { + port1 = PORT_ATA2_CMD_BASE; + port2 = PORT_ATA2_CTRL_BASE; + irq = IRQ_ATA2; + } + init_controller(pci, irq, port1, port2, master ? master + 8 : 0); +} + +static void +found_genericata(struct pci_device *pci, void *arg) +{ + init_pciata(pci, pci->prog_if); +} + +static void +found_compatibleahci(struct pci_device *pci, void *arg) +{ + if (CONFIG_AHCI) + // Already handled directly via native ahci interface. + return; + init_pciata(pci, 0x8f); +} + +static const struct pci_device_id pci_ata_tbl[] = { + PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE + , found_genericata), + PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4391, found_compatibleahci), + PCI_DEVICE_END, +}; + +// Locate and init ata controllers. +static void +ata_scan(void) +{ + if (CONFIG_QEMU && hlist_empty(&PCIDevices)) { + // No PCI devices found - probably a QEMU "-M isapc" machine. + // Try using ISA ports for ATA controllers. + init_controller(NULL, IRQ_ATA1 + , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0); + init_controller(NULL, IRQ_ATA2 + , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0); + return; + } + + // Scan PCI bus for ATA adapters + struct pci_device *pci; + foreachpci(pci) { + pci_init_device(pci_ata_tbl, pci, NULL); + } +} + +void +ata_setup(void) +{ + ASSERT32FLAT(); + if (!CONFIG_ATA) + return; + + dprintf(3, "init hard drives\n"); + + SpinupEnd = timer_calc(IDE_TIMEOUT); + ata_scan(); + + SET_BDA(disk_control_byte, 0xc0); + + enable_hwirq(14, FUNC16(entry_76)); +} |