diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/openbios/drivers/usbohci_rh.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/openbios/drivers/usbohci_rh.c')
-rw-r--r-- | qemu/roms/openbios/drivers/usbohci_rh.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/qemu/roms/openbios/drivers/usbohci_rh.c b/qemu/roms/openbios/drivers/usbohci_rh.c new file mode 100644 index 000000000..55503be61 --- /dev/null +++ b/qemu/roms/openbios/drivers/usbohci_rh.c @@ -0,0 +1,212 @@ +/* + * Driver for USB OHCI Root Hubs ported from CoreBoot + * + * Copyright (C) 2014 BALATON Zoltan + * + * This file was part of the libpayload project. + * + * Copyright (C) 2010 Patrick Georgi + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include "config.h" +#include "timer.h" +#include "usbohci_private.h" +#include "usbohci.h" + +typedef struct { + int numports; + int *port; +} rh_inst_t; + +#define RH_INST(dev) ((rh_inst_t*)(dev)->data) + +static void +ohci_rh_enable_port (usbdev_t *dev, int port) +{ + /* Reset RH port should hold 50ms with pulses of at least 10ms and + * gaps of at most 3ms (usb20 spec 7.1.7.5). + * After reset, the port will be enabled automatically (ohci spec + * 7.4.4). + */ + int total_delay = 100; /* 100 * 500us == 50ms */ + while (total_delay > 0) { + if (!(READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) + & CurrentConnectStatus)) + return; + + /* start reset */ + OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = + __cpu_to_le32(SetPortReset); + int timeout = 200; /* timeout after 200 * 500us == 100ms */ + while ((READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) + & PortResetStatus) + && timeout--) { + udelay(500); total_delay--; + } + if (READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) + & PortResetStatus) { + usb_debug("Warning: root-hub port reset timed out.\n"); + break; + } + if ((200-timeout) < 20) { + usb_debug("Warning: port reset too short: %dms; " + "should be at least 10ms.\n", + (200-timeout)/2); + total_delay = 0; /* can happen on QEMU */ + } + /* clear reset status change */ + OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] = + __cpu_to_le32(PortResetStatusChange); + usb_debug ("rh port reset finished after %dms.\n", (200-timeout)/2); + } +} + +/* disable root hub */ +static void +ohci_rh_disable_port (usbdev_t *dev, int port) +{ + OHCI_INST (dev->controller)->opreg->HcRhPortStatus[port] = + __cpu_to_le32(ClearPortEnable); // disable port + int timeout = 50; /* timeout after 50 * 100us == 5ms */ + while ((READ_OPREG(OHCI_INST (dev->controller), HcRhPortStatus[port]) + & PortEnableStatus) + && timeout--) { + udelay(100); + } +} + +static void +ohci_rh_scanport (usbdev_t *dev, int port) +{ + if (port >= RH_INST(dev)->numports) { + usb_debug("Invalid port %d\n", port); + return; + } + + /* device registered, and device change logged, so something must have happened */ + if (RH_INST (dev)->port[port] != -1) { + usb_detach_device(dev->controller, RH_INST (dev)->port[port]); + RH_INST (dev)->port[port] = -1; + } + + /* no device attached + previously registered devices are detached, nothing left to do */ + if (!(READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) & CurrentConnectStatus)) + return; + + // clear port state change + OHCI_INST(dev->controller)->opreg->HcRhPortStatus[port] = __cpu_to_le32(ConnectStatusChange); + ohci_rh_enable_port (dev, port); + + mdelay(100); // wait for signal to stabilize + + if (!(READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) & PortEnableStatus)) { + usb_debug ("port enable failed\n"); + return; + } + + int speed = (READ_OPREG(OHCI_INST(dev->controller), HcRhPortStatus[port]) & LowSpeedDeviceAttached) != 0; + RH_INST (dev)->port[port] = usb_attach_device(dev->controller, dev->address, port, speed); +} + +static int +ohci_rh_report_port_changes (usbdev_t *dev) +{ + ohci_t *const ohcic = OHCI_INST (dev->controller); + + int i; + + for (i = 0; i < RH_INST(dev)->numports; i++) { + // maybe detach+attach happened between two scans? + if (READ_OPREG(ohcic, HcRhPortStatus[i]) & ConnectStatusChange) { + ohcic->opreg->HcRhPortStatus[i] = __cpu_to_le32(ConnectStatusChange); + usb_debug("attachment change on port %d\n", i); + return i; + } + } + + // no change + return -1; +} + +static void +ohci_rh_destroy (usbdev_t *dev) +{ + int i; + for (i = 0; i < RH_INST (dev)->numports; i++) + ohci_rh_disable_port (dev, i); + free (RH_INST (dev)); +} + +static void +ohci_rh_poll (usbdev_t *dev) +{ + ohci_t *const ohcic = OHCI_INST (dev->controller); + + int port; + + /* Check if anything changed. */ + if (!(READ_OPREG(ohcic, HcInterruptStatus) & RootHubStatusChange)) + return; + ohcic->opreg->HcInterruptStatus = __cpu_to_le32(RootHubStatusChange); + usb_debug("root hub status change\n"); + + /* Scan ports with changed connection status. */ + while ((port = ohci_rh_report_port_changes (dev)) != -1) + ohci_rh_scanport (dev, port); +} + +void +ohci_rh_init (usbdev_t *dev) +{ + int i; + + dev->destroy = ohci_rh_destroy; + dev->poll = ohci_rh_poll; + + dev->data = malloc (sizeof (rh_inst_t)); + if (!dev->data) { + printk("Not enough memory for OHCI RH.\n"); + return; + } + + RH_INST (dev)->numports = READ_OPREG(OHCI_INST(dev->controller), HcRhDescriptorA) & NumberDownstreamPortsMask; + RH_INST (dev)->port = malloc(sizeof(int) * RH_INST (dev)->numports); + usb_debug("%d ports registered\n", RH_INST (dev)->numports); + + for (i = 0; i < RH_INST (dev)->numports; i++) { + ohci_rh_enable_port (dev, i); + RH_INST (dev)->port[i] = -1; + } + + /* we can set them here because a root hub _really_ shouldn't + appear elsewhere */ + dev->address = 0; + dev->hub = -1; + dev->port = -1; + + usb_debug("rh init done\n"); +} |