Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 787 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/drivers/net/rhine.c b/qemu/roms/ipxe/src/drivers/net/rhine.c
new file mode 100644
index 000000000..42bc124e0
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/rhine.c
@@ -0,0 +1,787 @@
+/*
+ * Copyright (C) 2012 Adrian Jamroz <adrian.jamroz@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <byteswap.h>
+#include <ipxe/netdevice.h>
+#include <ipxe/ethernet.h>
+#include <ipxe/if_ether.h>
+#include <ipxe/iobuf.h>
+#include <ipxe/malloc.h>
+#include <ipxe/pci.h>
+#include <ipxe/mii.h>
+#include "rhine.h"
+
+/** @file
+ *
+ * VIA Rhine network driver
+ *
+ */
+
+/******************************************************************************
+ *
+ * MII interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Read from MII register
+ *
+ * @v mii		MII interface
+ * @v reg		Register address
+ * @ret value		Data read, or negative error
+ */
+static int rhine_mii_read ( struct mii_interface *mii, unsigned int reg ) {
+	struct rhine_nic *rhn = container_of ( mii, struct rhine_nic, mii );
+	unsigned int timeout = RHINE_TIMEOUT_US;
+	uint8_t cr;
+
+	DBGC2 ( rhn, "RHINE %p MII read reg %d\n", rhn, reg );
+
+	/* Initiate read */
+	writeb ( reg, rhn->regs + RHINE_MII_ADDR );
+	cr = readb ( rhn->regs + RHINE_MII_CR );
+	writeb ( ( cr | RHINE_MII_CR_RDEN ), rhn->regs + RHINE_MII_CR );
+
+	/* Wait for read to complete */
+	while ( timeout-- ) {
+		udelay ( 1 );
+		cr = readb ( rhn->regs + RHINE_MII_CR );
+		if ( ! ( cr & RHINE_MII_CR_RDEN ) )
+			return readw ( rhn->regs + RHINE_MII_RDWR );
+	}
+
+	DBGC ( rhn, "RHINE %p MII read timeout\n", rhn );
+	return -ETIMEDOUT;
+}
+
+/**
+ * Write to MII register
+ *
+ * @v mii		MII interface
+ * @v reg		Register address
+ * @v data		Data to write
+ * @ret rc		Return status code
+ */
+static int rhine_mii_write ( struct mii_interface *mii, unsigned int reg,
+                             unsigned int data ) {
+	struct rhine_nic *rhn = container_of ( mii, struct rhine_nic, mii );
+	unsigned int timeout = RHINE_TIMEOUT_US;
+	uint8_t cr;
+
+	DBGC2 ( rhn, "RHINE %p MII write reg %d data 0x%04x\n",
+	        rhn, reg, data );
+
+	/* Initiate write */
+	writeb ( reg, rhn->regs + RHINE_MII_ADDR );
+	writew ( data, rhn->regs + RHINE_MII_RDWR );
+	cr = readb ( rhn->regs + RHINE_MII_CR );
+	writeb ( ( cr | RHINE_MII_CR_WREN ), rhn->regs + RHINE_MII_CR );
+
+	/* Wait for write to complete */
+	while ( timeout-- ) {
+		udelay ( 1 );
+		cr = readb ( rhn->regs + RHINE_MII_CR );
+		if ( ! ( cr & RHINE_MII_CR_WREN ) )
+			return 0;
+	}
+
+	DBGC ( rhn, "RHINE %p MII write timeout\n", rhn );
+	return -ETIMEDOUT;
+}
+
+/** Rhine MII operations */
+static struct mii_operations rhine_mii_operations = {
+	.read = rhine_mii_read,
+	.write = rhine_mii_write,
+};
+
+/**
+ * Enable auto-polling
+ *
+ * @v rhn		Rhine device
+ * @ret rc		Return status code
+ *
+ * This is voodoo.  There seems to be no documentation on exactly what
+ * we are waiting for, or why we have to do anything other than simply
+ * turn the feature on.
+ */
+static int rhine_mii_autopoll ( struct rhine_nic *rhn ) {
+	unsigned int timeout = RHINE_TIMEOUT_US;
+	uint8_t addr;
+
+	/* Initiate auto-polling */
+	writeb ( MII_BMSR, rhn->regs + RHINE_MII_ADDR );
+	writeb ( RHINE_MII_CR_AUTOPOLL, rhn->regs + RHINE_MII_CR );
+
+	/* Wait for auto-polling to complete */
+	while ( timeout-- ) {
+		udelay ( 1 );
+		addr = readb ( rhn->regs + RHINE_MII_ADDR );
+		if ( ! ( addr & RHINE_MII_ADDR_MDONE ) ) {
+			writeb ( ( MII_BMSR | RHINE_MII_ADDR_MSRCEN ),
+				 rhn->regs + RHINE_MII_ADDR );
+			return 0;
+		}
+	}
+
+	DBGC ( rhn, "RHINE %p MII auto-poll timeout\n", rhn );
+	return -ETIMEDOUT;
+}
+
+/******************************************************************************
+ *
+ * Device reset
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Reset hardware
+ *
+ * @v rhn		Rhine device
+ * @ret rc		Return status code
+ *
+ * We're using PIO because this might reset the MMIO enable bit.
+ */
+static int rhine_reset ( struct rhine_nic *rhn ) {
+	unsigned int timeout = RHINE_TIMEOUT_US;
+	uint8_t cr1;
+
+	DBGC ( rhn, "RHINE %p reset\n", rhn );
+
+	/* Initiate reset */
+	outb ( RHINE_CR1_RESET, rhn->ioaddr + RHINE_CR1 );
+
+	/* Wait for reset to complete */
+	while ( timeout-- ) {
+		udelay ( 1 );
+		cr1 = inb ( rhn->ioaddr + RHINE_CR1 );
+		if ( ! ( cr1 & RHINE_CR1_RESET ) )
+			return 0;
+	}
+
+	DBGC ( rhn, "RHINE %p reset timeout\n", rhn );
+	return -ETIMEDOUT;
+}
+
+/**
+ * Enable MMIO register access
+ *
+ * @v rhn		Rhine device
+ * @v revision		Card revision
+ */
+static void rhine_enable_mmio ( struct rhine_nic *rhn, int revision ) {
+	uint8_t conf;
+
+	if ( revision < RHINE_REVISION_OLD ) {
+		conf = inb ( rhn->ioaddr + RHINE_CHIPCFG_A );
+		outb ( ( conf | RHINE_CHIPCFG_A_MMIO ),
+		       rhn->ioaddr + RHINE_CHIPCFG_A );
+	} else {
+		conf = inb ( rhn->ioaddr + RHINE_CHIPCFG_D );
+		outb ( ( conf | RHINE_CHIPCFG_D_MMIO ),
+		       rhn->ioaddr + RHINE_CHIPCFG_D );
+	}
+}
+
+/**
+ * Reload EEPROM contents
+ *
+ * @v rhn		Rhine device
+ * @ret rc		Return status code
+ *
+ * We're using PIO because this might reset the MMIO enable bit.
+ */
+static int rhine_reload_eeprom ( struct rhine_nic *rhn ) {
+	unsigned int timeout = RHINE_TIMEOUT_US;
+	uint8_t eeprom;
+
+	/* Initiate reload */
+	eeprom = inb ( rhn->ioaddr + RHINE_EEPROM_CTRL );
+	outb ( ( eeprom | RHINE_EEPROM_CTRL_RELOAD ),
+	       rhn->ioaddr + RHINE_EEPROM_CTRL );
+
+	/* Wait for reload to complete */
+	while ( timeout-- ) {
+		udelay ( 1 );
+		eeprom = inb ( rhn->ioaddr + RHINE_EEPROM_CTRL );
+		if ( ! ( eeprom & RHINE_EEPROM_CTRL_RELOAD ) )
+			return 0;
+	}
+
+	DBGC ( rhn, "RHINE %p EEPROM reload timeout\n", rhn );
+	return -ETIMEDOUT;
+}
+
+/******************************************************************************
+ *
+ * Link state
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Check link state
+ *
+ * @v netdev		Network device
+ */
+static void rhine_check_link ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	uint8_t mii_sr;
+
+	/* Read MII status register */
+	mii_sr = readb ( rhn->regs + RHINE_MII_SR );
+	DBGC ( rhn, "RHINE %p link status %02x\n", rhn, mii_sr );
+
+	/* Report link state */
+	if ( ! ( mii_sr & RHINE_MII_SR_LINKPOLL ) ) {
+		netdev_link_up ( netdev );
+	} else if ( mii_sr & RHINE_MII_SR_PHYERR ) {
+		netdev_link_err ( netdev, -EIO );
+	} else {
+		netdev_link_down ( netdev );
+	}
+}
+
+/******************************************************************************
+ *
+ * Network device interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Create descriptor ring
+ *
+ * @v rhn		Rhine device
+ * @v ring		Descriptor ring
+ * @ret rc		Return status code
+ */
+static int rhine_create_ring ( struct rhine_nic *rhn,
+			       struct rhine_ring *ring ) {
+	size_t len = ( ring->count * sizeof ( ring->desc[0] ) );
+	struct rhine_descriptor *next;
+	physaddr_t address;
+	unsigned int i;
+
+	/* Allocate descriptors */
+	ring->desc = malloc_dma ( len, RHINE_RING_ALIGN );
+	if ( ! ring->desc )
+		return -ENOMEM;
+
+	/* Initialise descriptor ring */
+	memset ( ring->desc, 0, len );
+	for ( i = 0 ; i < ring->count ; i++ ) {
+		next = &ring->desc[ ( i + 1 ) % ring->count ];
+		ring->desc[i].next = cpu_to_le32 ( virt_to_bus ( next ) );
+	}
+
+	/* Program ring address */
+	address = virt_to_bus ( ring->desc );
+	writel ( address, rhn->regs + ring->reg );
+
+	DBGC ( rhn, "RHINE %p ring %02x is at [%08llx,%08llx)\n",
+	       rhn, ring->reg, ( ( unsigned long long ) address ),
+	       ( ( unsigned long long ) address + len ) );
+
+	return 0;
+}
+
+/**
+ * Destroy descriptor ring
+ *
+ * @v rhn		Rhine device
+ * @v ring		Descriptor ring
+ */
+static void rhine_destroy_ring ( struct rhine_nic *rhn,
+				 struct rhine_ring *ring ) {
+	size_t len = ( ring->count * sizeof ( ring->desc[0] ) );
+
+	/* Clear ring address */
+	writel ( 0, rhn->regs + ring->reg );
+
+	/* Free descriptor ring */
+	free_dma ( ring->desc, len );
+	ring->desc = NULL;
+	ring->prod = 0;
+	ring->cons = 0;
+}
+
+/**
+ * Refill RX descriptor ring
+ *
+ * @v rhn		Rhine device
+ */
+static void rhine_refill_rx ( struct rhine_nic *rhn ) {
+	struct rhine_descriptor *desc;
+	struct io_buffer *iobuf;
+	unsigned int rx_idx;
+	physaddr_t address;
+
+	while ( ( rhn->rx.prod - rhn->rx.cons ) < RHINE_RXDESC_NUM ) {
+
+		/* Allocate I/O buffer */
+		iobuf = alloc_iob ( RHINE_RX_MAX_LEN );
+		if ( ! iobuf ) {
+			/* Wait for next refill */
+			return;
+		}
+
+		/* Populate next receive descriptor */
+		rx_idx = ( rhn->rx.prod++ % RHINE_RXDESC_NUM );
+		desc = &rhn->rx.desc[rx_idx];
+		address = virt_to_bus ( iobuf->data );
+		desc->buffer = cpu_to_le32 ( address );
+		desc->des1 =
+			cpu_to_le32 ( RHINE_DES1_SIZE ( RHINE_RX_MAX_LEN - 1) |
+				      RHINE_DES1_CHAIN | RHINE_DES1_IC );
+		wmb();
+		desc->des0 = cpu_to_le32 ( RHINE_DES0_OWN );
+
+		/* Record I/O buffer */
+		rhn->rx_iobuf[rx_idx] = iobuf;
+
+		DBGC2 ( rhn, "RHINE %p RX %d is [%llx,%llx)\n", rhn, rx_idx,
+			( ( unsigned long long ) address ),
+			( ( unsigned long long ) address + RHINE_RX_MAX_LEN ) );
+	}
+}
+
+/**
+ * Open network device
+ *
+ * @v netdev		Network device
+ * @ret rc		Return status code
+ */
+static int rhine_open ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	int rc;
+
+	/* Create transmit ring */
+	if ( ( rc = rhine_create_ring ( rhn, &rhn->tx ) ) != 0 )
+		goto err_create_tx;
+
+	/* Create receive ring */
+	if ( ( rc = rhine_create_ring ( rhn, &rhn->rx ) ) != 0 )
+		goto err_create_rx;
+
+	/* Set receive configuration */
+	writeb ( ( RHINE_RCR_PHYS_ACCEPT | RHINE_RCR_BCAST_ACCEPT |
+		   RHINE_RCR_RUNT_ACCEPT ), rhn->regs + RHINE_RCR );
+
+	/* Enable link status monitoring */
+	if ( ( rc = rhine_mii_autopoll ( rhn ) ) != 0 )
+		goto err_mii_autopoll;
+
+	/* Some cards need an extra delay(observed with VT6102) */
+	mdelay ( 10 );
+
+	/* Enable RX/TX of packets */
+	writeb ( ( RHINE_CR0_STARTNIC | RHINE_CR0_RXEN | RHINE_CR0_TXEN ),
+		 rhn->regs + RHINE_CR0 );
+
+	/* Enable auto polling and full duplex operation */
+	rhn->cr1 = RHINE_CR1_FDX;
+	writeb ( rhn->cr1, rhn->regs + RHINE_CR1 );
+
+	/* Refill RX ring */
+	rhine_refill_rx ( rhn );
+
+	/* Update link state */
+	rhine_check_link ( netdev );
+
+	return 0;
+
+ err_mii_autopoll:
+	rhine_destroy_ring ( rhn, &rhn->rx );
+ err_create_rx:
+	rhine_destroy_ring ( rhn, &rhn->tx );
+ err_create_tx:
+	return rc;
+}
+
+/**
+ * Close network device
+ *
+ * @v netdev		Network device
+ */
+static void rhine_close ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	unsigned int i;
+
+	/* Disable interrupts */
+	writeb ( 0, RHINE_IMR0 );
+	writeb ( 0, RHINE_IMR1 );
+
+	/* Stop card, clear RXON and TXON bits */
+	writeb ( RHINE_CR0_STOPNIC, rhn->regs + RHINE_CR0 );
+
+	/* Destroy receive ring */
+	rhine_destroy_ring ( rhn, &rhn->rx );
+
+	/* Discard any unused receive buffers */
+	for ( i = 0 ; i < RHINE_RXDESC_NUM ; i++ ) {
+		if ( rhn->rx_iobuf[i] )
+			free_iob ( rhn->rx_iobuf[i] );
+		rhn->rx_iobuf[i] = NULL;
+	}
+
+	/* Destroy transmit ring */
+	rhine_destroy_ring ( rhn, &rhn->tx );
+}
+
+/**
+ * Transmit packet
+ *
+ * @v netdev		Network device
+ * @v iobuf		I/O buffer
+ * @ret rc		Return status code
+ */
+static int rhine_transmit ( struct net_device *netdev,
+                            struct io_buffer *iobuf ) {
+	struct rhine_nic *rhn = netdev->priv;
+	struct rhine_descriptor *desc;
+	physaddr_t address;
+	unsigned int tx_idx;
+
+	/* Get next transmit descriptor */
+	if ( ( rhn->tx.prod - rhn->tx.cons ) >= RHINE_TXDESC_NUM )
+		return -ENOBUFS;
+	tx_idx = ( rhn->tx.prod++ % RHINE_TXDESC_NUM );
+	desc = &rhn->tx.desc[tx_idx];
+
+	/* Pad and align packet */
+	iob_pad ( iobuf, ETH_ZLEN );
+	address = virt_to_bus ( iobuf->data );
+
+	/* Populate transmit descriptor */
+	desc->buffer = cpu_to_le32 ( address );
+	desc->des1 = cpu_to_le32 ( RHINE_DES1_IC | RHINE_TDES1_STP |
+				   RHINE_TDES1_EDP | RHINE_DES1_CHAIN |
+				   RHINE_DES1_SIZE ( iob_len ( iobuf ) ) );
+	wmb();
+	desc->des0 = cpu_to_le32 ( RHINE_DES0_OWN );
+	wmb();
+
+	/* Notify card that there are packets ready to transmit */
+	writeb ( ( rhn->cr1 | RHINE_CR1_TXPOLL ), rhn->regs + RHINE_CR1 );
+
+	DBGC2 ( rhn, "RHINE %p TX %d is [%llx,%llx)\n", rhn, tx_idx,
+		( ( unsigned long long ) address ),
+		( ( unsigned long long ) address + iob_len ( iobuf ) ) );
+
+	return 0;
+}
+
+/**
+ * Poll for completed packets
+ *
+ * @v netdev		Network device
+ */
+static void rhine_poll_tx ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	struct rhine_descriptor *desc;
+	unsigned int tx_idx;
+	uint32_t des0;
+
+	/* Check for completed packets */
+	while ( rhn->tx.cons != rhn->tx.prod ) {
+
+		/* Get next transmit descriptor */
+		tx_idx = ( rhn->tx.cons % RHINE_TXDESC_NUM );
+		desc = &rhn->tx.desc[tx_idx];
+
+		/* Stop if descriptor is still in use */
+		if ( desc->des0 & cpu_to_le32 ( RHINE_DES0_OWN ) )
+			return;
+
+		/* Complete TX descriptor */
+		des0 = le32_to_cpu ( desc->des0 );
+		if ( des0 & RHINE_TDES0_TERR ) {
+			DBGC ( rhn, "RHINE %p TX %d error (DES0 %08x)\n",
+			       rhn, tx_idx, des0 );
+			netdev_tx_complete_next_err ( netdev, -EIO );
+		} else {
+			DBGC2 ( rhn, "RHINE %p TX %d complete\n", rhn, tx_idx );
+			netdev_tx_complete_next ( netdev );
+		}
+		rhn->tx.cons++;
+	}
+}
+
+/**
+ * Poll for received packets
+ *
+ * @v netdev		Network device
+ */
+static void rhine_poll_rx ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	struct rhine_descriptor *desc;
+	struct io_buffer *iobuf;
+	unsigned int rx_idx;
+	uint32_t des0;
+	size_t len;
+
+	/* Check for received packets */
+	while ( rhn->rx.cons != rhn->rx.prod ) {
+
+		/* Get next receive descriptor */
+		rx_idx = ( rhn->rx.cons % RHINE_RXDESC_NUM );
+		desc = &rhn->rx.desc[rx_idx];
+
+		/* Stop if descriptor is still in use */
+		if ( desc->des0 & cpu_to_le32 ( RHINE_DES0_OWN ) )
+			return;
+
+		/* Populate I/O buffer */
+		iobuf = rhn->rx_iobuf[rx_idx];
+		rhn->rx_iobuf[rx_idx] = NULL;
+		des0 = le32_to_cpu ( desc->des0 );
+		len = ( RHINE_DES0_GETSIZE ( des0 ) - 4 /* strip CRC */ );
+		iob_put ( iobuf, len );
+
+		/* Hand off to network stack */
+		if ( des0 & RHINE_RDES0_RXOK ) {
+			DBGC2 ( rhn, "RHINE %p RX %d complete (length %zd)\n",
+				rhn, rx_idx, len );
+			netdev_rx ( netdev, iobuf );
+		} else {
+			DBGC ( rhn, "RHINE %p RX %d error (length %zd, DES0 "
+			       "%08x)\n", rhn, rx_idx, len, des0 );
+			netdev_rx_err ( netdev, iobuf, -EIO );
+		}
+		rhn->rx.cons++;
+	}
+}
+
+/**
+ * Poll for completed and received packets
+ *
+ * @v netdev		Network device
+ */
+static void rhine_poll ( struct net_device *netdev ) {
+	struct rhine_nic *rhn = netdev->priv;
+	uint8_t isr0;
+	uint8_t isr1;
+
+	/* Read and acknowledge interrupts */
+	isr0 = readb ( rhn->regs + RHINE_ISR0 );
+	isr1 = readb ( rhn->regs + RHINE_ISR1 );
+	if ( isr0 )
+		writeb ( isr0, rhn->regs + RHINE_ISR0 );
+	if ( isr1 )
+		writeb ( isr1, rhn->regs + RHINE_ISR1 );
+
+	/* Report unexpected errors */
+	if ( ( isr0 & ( RHINE_ISR0_MIBOVFL | RHINE_ISR0_PCIERR |
+			RHINE_ISR0_RXRINGERR | RHINE_ISR0_TXRINGERR ) ) ||
+	     ( isr1 & ( RHINE_ISR1_GPI | RHINE_ISR1_TXABORT |
+			RHINE_ISR1_RXFIFOOVFL | RHINE_ISR1_RXFIFOUNFL |
+			RHINE_ISR1_TXFIFOUNFL ) ) ) {
+		DBGC ( rhn, "RHINE %p unexpected ISR0 %02x ISR1 %02x\n",
+		       rhn, isr0, isr1 );
+		/* Report as a TX error */
+		netdev_tx_err ( netdev, NULL, -EIO );
+	}
+
+	/* Poll for TX completions, if applicable */
+	if ( isr0 & ( RHINE_ISR0_TXDONE | RHINE_ISR0_TXERR ) )
+		rhine_poll_tx ( netdev );
+
+	/* Poll for RX completions, if applicable */
+	if ( isr0 & ( RHINE_ISR0_RXDONE | RHINE_ISR0_RXERR ) )
+		rhine_poll_rx ( netdev );
+
+	/* Handle RX buffer exhaustion */
+	if ( isr1 & RHINE_ISR1_RXNOBUF ) {
+		rhine_poll_rx ( netdev );
+		netdev_rx_err ( netdev, NULL, -ENOBUFS );
+	}
+
+	/* Check link state, if applicable */
+	if ( isr1 & RHINE_ISR1_PORTSTATE )
+		rhine_check_link ( netdev );
+
+	/* Refill RX ring */
+	rhine_refill_rx ( rhn );
+}
+
+/**
+ * Enable or disable interrupts
+ *
+ * @v netdev		Network device
+ * @v enable		Interrupts should be enabled
+ */
+static void rhine_irq ( struct net_device *netdev, int enable ) {
+	struct rhine_nic *nic = netdev->priv;
+
+	if ( enable ) {
+		/* Enable interrupts */
+		writeb ( 0xff, nic->regs + RHINE_IMR0 );
+		writeb ( 0xff, nic->regs + RHINE_IMR1 );
+	} else {
+		/* Disable interrupts */
+		writeb ( 0, nic->regs + RHINE_IMR0 );
+		writeb ( 0, nic->regs + RHINE_IMR1 );
+	}
+}
+
+/** Rhine network device operations */
+static struct net_device_operations rhine_operations = {
+	.open		= rhine_open,
+	.close		= rhine_close,
+	.transmit	= rhine_transmit,
+	.poll		= rhine_poll,
+	.irq		= rhine_irq,
+};
+
+/******************************************************************************
+ *
+ * PCI interface
+ *
+ ******************************************************************************
+ */
+
+/**
+ * Probe PCI device
+ *
+ * @v pci		PCI device
+ * @ret rc		Return status code
+ */
+static int rhine_probe ( struct pci_device *pci ) {
+	struct net_device *netdev;
+	struct rhine_nic *rhn;
+	uint8_t revision;
+	unsigned int i;
+	int rc;
+
+	/* Allocate and initialise net device */
+	netdev = alloc_etherdev ( sizeof ( *rhn ) );
+	if ( ! netdev ) {
+		rc = -ENOMEM;
+		goto err_alloc;
+	}
+	netdev_init ( netdev, &rhine_operations );
+	rhn = netdev->priv;
+	pci_set_drvdata ( pci, netdev );
+	netdev->dev = &pci->dev;
+	memset ( rhn, 0, sizeof ( *rhn ) );
+	rhine_init_ring ( &rhn->tx, RHINE_TXDESC_NUM, RHINE_TXQUEUE_BASE );
+	rhine_init_ring ( &rhn->rx, RHINE_RXDESC_NUM, RHINE_RXQUEUE_BASE );
+
+	/* Fix up PCI device */
+	adjust_pci_device ( pci );
+
+	/* Map registers */
+	rhn->regs = ioremap ( pci->membase, RHINE_BAR_SIZE );
+	rhn->ioaddr = pci->ioaddr;
+	DBGC ( rhn, "RHINE %p regs at %08lx, I/O at %04lx\n", rhn,
+	       pci->membase, pci->ioaddr );
+
+	/* Reset the NIC */
+	if ( ( rc = rhine_reset ( rhn ) ) != 0 )
+		goto err_reset;
+
+	/* Reload EEPROM */
+	if ( ( rc = rhine_reload_eeprom ( rhn ) ) != 0 )
+		goto err_reload_eeprom;
+
+	/* Read card revision and enable MMIO */
+	pci_read_config_byte ( pci, PCI_REVISION, &revision );
+	DBGC ( rhn, "RHINE %p revision %#02x detected\n", rhn, revision );
+	rhine_enable_mmio ( rhn, revision );
+
+	/* Read MAC address */
+	for ( i = 0 ; i < ETH_ALEN ; i++ )
+		netdev->hw_addr[i] = readb ( rhn->regs + RHINE_MAC + i );
+
+	/* Initialise and reset MII interface */
+	mii_init ( &rhn->mii, &rhine_mii_operations );
+	if ( ( rc = mii_reset ( &rhn->mii ) ) != 0 ) {
+		DBGC ( rhn, "RHINE %p could not reset MII: %s\n",
+		       rhn, strerror ( rc ) );
+		goto err_mii_reset;
+	}
+	DBGC ( rhn, "RHINE PHY vendor %04x device %04x\n",
+	       rhine_mii_read ( &rhn->mii, 0x02 ),
+	       rhine_mii_read ( &rhn->mii, 0x03 ) );
+
+	/* Register network device */
+	if ( ( rc = register_netdev ( netdev ) ) != 0 )
+		goto err_register_netdev;
+
+	/* Set initial link state */
+	rhine_check_link ( netdev );
+
+	return 0;
+
+ err_register_netdev:
+ err_mii_reset:
+ err_reload_eeprom:
+	rhine_reset ( rhn );
+ err_reset:
+	netdev_nullify ( netdev );
+	netdev_put ( netdev );
+ err_alloc:
+	return rc;
+}
+
+/**
+ * Remove PCI device
+ *
+ * @v pci		PCI device
+ */
+static void rhine_remove ( struct pci_device *pci ) {
+	struct net_device *netdev = pci_get_drvdata ( pci );
+	struct rhine_nic *nic = netdev->priv;
+
+	/* Unregister network device */
+	unregister_netdev ( netdev );
+
+	/* Reset card */
+	rhine_reset ( nic );
+
+	/* Free network device */
+	netdev_nullify ( netdev );
+	netdev_put ( netdev );
+}
+
+/** Rhine PCI device IDs */
+static struct pci_device_id rhine_nics[] = {
+	PCI_ROM ( 0x1106, 0x3065, "dlink-530tx", "VIA VT6102", 0 ),
+	PCI_ROM ( 0x1106, 0x3106, "vt6105", "VIA VT6105", 0 ),
+	PCI_ROM ( 0x1106, 0x3043, "dlink-530tx-old", "VIA VT3043", 0 ),
+	PCI_ROM ( 0x1106, 0x3053, "vt6105m", "VIA VT6105M", 0 ),
+	PCI_ROM ( 0x1106, 0x6100, "via-rhine-old", "VIA 86C100A", 0 )
+};
+
+/** Rhine PCI driver */
+struct pci_driver rhine_driver __pci_driver = {
+	.ids = rhine_nics,
+	.id_count = ( sizeof ( rhine_nics ) / sizeof ( rhine_nics[0] ) ),
+	.probe = rhine_probe,
+	.remove = rhine_remove,
+};