Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 307 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/drivers/net/realtek.h b/qemu/roms/ipxe/src/drivers/net/realtek.h
new file mode 100644
index 000000000..ac33405e8
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/realtek.h
@@ -0,0 +1,307 @@
+#ifndef _REALTEK_H
+#define _REALTEK_H
+
+/** @file
+ *
+ * Realtek 10/100/1000 network card driver
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <ipxe/spi.h>
+#include <ipxe/spi_bit.h>
+#include <ipxe/nvo.h>
+#include <ipxe/if_ether.h>
+
+/** PCI memory BAR size */
+#define RTL_BAR_SIZE 0x100
+
+/** A packet descriptor */
+struct realtek_descriptor {
+	/** Buffer size */
+	uint16_t length;
+	/** Flags */
+	uint16_t flags;
+	/** Reserved */
+	uint32_t reserved;
+	/** Buffer address */
+	uint64_t address;
+} __attribute__ (( packed ));
+
+/** Descriptor buffer size mask */
+#define RTL_DESC_SIZE_MASK 0x3fff
+
+/** Packet descriptor flags */
+enum realtek_descriptor_flags {
+	/** Descriptor is owned by NIC */
+	RTL_DESC_OWN = 0x8000,
+	/** End of descriptor ring */
+	RTL_DESC_EOR = 0x4000,
+	/** First segment descriptor */
+	RTL_DESC_FS = 0x2000,
+	/** Last segment descriptor */
+	RTL_DESC_LS = 0x1000,
+	/** Receive error summary */
+	RTL_DESC_RES = 0x0020,
+};
+
+/** Descriptor ring alignment */
+#define RTL_RING_ALIGN 256
+
+/** A legacy mode receive packet header */
+struct realtek_legacy_header {
+	/** Status */
+	uint16_t status;
+	/** Length */
+	uint16_t length;
+	/** Packet data */
+	uint8_t data[0];
+} __attribute__ (( packed ));
+
+/** Legacy mode status bits */
+enum realtek_legacy_status {
+	/** Received OK */
+	RTL_STAT_ROK = 0x0001,
+};
+
+/** ID Register 0 (6 bytes) */
+#define RTL_IDR0 0x00
+
+/** Multicast Register 0 (dword) */
+#define RTL_MAR0 0x08
+
+/** Multicast Register 4 (dword) */
+#define RTL_MAR4 0x0c
+
+/** Transmit Status of Descriptor N (dword, 8139 only) */
+#define RTL_TSD(n) ( 0x10 + 4 * (n) )
+#define RTL_TSD_ERTXTH(x)	( (x) << 16 ) /**< Early TX threshold */
+#define RTL_TSD_ERTXTH_DEFAULT RTL_TSD_ERTXTH ( 256 / 32 )
+#define RTL_TSD_OWN		0x00002000UL /**< Ownership */
+
+/** Transmit Start Address of Descriptor N (dword, 8139 only) */
+#define RTL_TSAD(n) ( 0x20 + 4 * (n) )
+
+/** Transmit Normal Priority Descriptors (qword) */
+#define RTL_TNPDS 0x20
+
+/** Number of transmit descriptors
+ *
+ * This is a hardware limit when using legacy mode.
+ */
+#define RTL_NUM_TX_DESC 4
+
+/** Receive Buffer Start Address (dword, 8139 only) */
+#define RTL_RBSTART 0x30
+
+/** Receive buffer length */
+#define RTL_RXBUF_LEN 8192
+
+/** Receive buffer padding */
+#define RTL_RXBUF_PAD 2038 /* Allow space for WRAP */
+
+/** Receive buffer alignment */
+#define RTL_RXBUF_ALIGN 16
+
+/** Command Register (byte) */
+#define RTL_CR 0x37
+#define RTL_CR_RST		0x10	/**< Reset */
+#define RTL_CR_RE		0x08	/**< Receiver Enable */
+#define RTL_CR_TE		0x04	/**< Transmit Enable */
+#define RTL_CR_BUFE		0x01	/**< Receive buffer empty */
+
+/** Maximum time to wait for a reset, in milliseconds */
+#define RTL_RESET_MAX_WAIT_MS 100
+
+/** Current Address of Packet Read (word, 8139 only) */
+#define RTL_CAPR 0x38
+
+/** Transmit Priority Polling Register (byte, 8169 only) */
+#define RTL_TPPOLL_8169 0x38
+#define RTL_TPPOLL_NPQ		0x40	/**< Normal Priority Queue Polling */
+
+/** Interrupt Mask Register (word) */
+#define RTL_IMR 0x3c
+#define RTL_IRQ_PUN_LINKCHG	0x0020	/**< Packet underrun / link change */
+#define RTL_IRQ_TER		0x0008	/**< Transmit error */
+#define RTL_IRQ_TOK		0x0004	/**< Transmit OK */
+#define RTL_IRQ_RER		0x0002	/**< Receive error */
+#define RTL_IRQ_ROK		0x0001	/**< Receive OK */
+
+/** Interrupt Status Register (word) */
+#define RTL_ISR 0x3e
+
+/** Transmit (Tx) Configuration Register (dword) */
+#define RTL_TCR 0x40
+#define RTL_TCR_MXDMA(x)	( (x) << 8 ) /**< Max DMA burst size */
+#define RTL_TCR_MXDMA_MASK	RTL_TCR_MXDMA ( 0x7 )
+#define RTL_TCR_MXDMA_DEFAULT	RTL_TCR_MXDMA ( 0x7 /* Unlimited */ )
+
+/** Receive (Rx) Configuration Register (dword) */
+#define RTL_RCR 0x44
+#define RTL_RCR_STOP_WORKING	0x01000000UL /**< Here be dragons */
+#define RTL_RCR_RXFTH(x)	( (x) << 13 ) /**< Receive FIFO threshold */
+#define RTL_RCR_RXFTH_MASK	RTL_RCR_RXFTH ( 0x7 )
+#define RTL_RCR_RXFTH_DEFAULT	RTL_RCR_RXFTH ( 0x7 /* Whole packet */ )
+#define RTL_RCR_RBLEN(x)	( (x) << 11 ) /**< Receive buffer length */
+#define RTL_RCR_RBLEN_MASK	RTL_RCR_RBLEN ( 0x3 )
+#define RTL_RCR_RBLEN_DEFAULT	RTL_RCR_RBLEN ( 0 /* 8kB */ )
+#define RTL_RCR_MXDMA(x)	( (x) << 8 ) /**< Max DMA burst size */
+#define RTL_RCR_MXDMA_MASK	RTL_RCR_MXDMA ( 0x7 )
+#define RTL_RCR_MXDMA_DEFAULT	RTL_RCR_MXDMA ( 0x7 /* Unlimited */ )
+#define RTL_RCR_WRAP		0x00000080UL /**< Overrun receive buffer */
+#define RTL_RCR_9356SEL		0x00000040UL /**< EEPROM is a 93C56 */
+#define RTL_RCR_AB		0x00000008UL /**< Accept broadcast packets */
+#define RTL_RCR_AM		0x00000004UL /**< Accept multicast packets */
+#define RTL_RCR_APM		0x00000002UL /**< Accept physical match */
+#define RTL_RCR_AAP		0x00000001UL /**< Accept all packets */
+
+/** 93C46 (93C56) Command Register (byte) */
+#define RTL_9346CR 0x50
+#define RTL_9346CR_EEM(x)	( (x) << 6 ) /**< Mode select */
+#define RTL_9346CR_EEM_EEPROM	RTL_9346CR_EEM ( 0x2 ) /**< EEPROM mode */
+#define RTL_9346CR_EEM_NORMAL	RTL_9346CR_EEM ( 0x0 ) /**< Normal mode */
+#define RTL_9346CR_EECS		0x08	/**< Chip select */
+#define RTL_9346CR_EESK		0x04	/**< Clock */
+#define RTL_9346CR_EEDI		0x02	/**< Data in */
+#define RTL_9346CR_EEDO		0x01	/**< Data out */
+
+/** Word offset of ID code word within EEPROM */
+#define RTL_EEPROM_ID ( 0x00 / 2 )
+
+/** EEPROM code word magic value */
+#define RTL_EEPROM_ID_MAGIC 0x8129
+
+/** Word offset of MAC address within EEPROM */
+#define RTL_EEPROM_MAC ( 0x0e / 2 )
+
+/** Word offset of VPD / non-volatile options within EEPROM */
+#define RTL_EEPROM_VPD ( 0x40 / 2 )
+
+/** Length of VPD / non-volatile options within EEPROM */
+#define RTL_EEPROM_VPD_LEN 0x40
+
+/** Configuration Register 1 (byte) */
+#define RTL_CONFIG1 0x52
+#define RTL_CONFIG1_VPD		0x02	/**< Vital Product Data enabled */
+
+/** Media Status Register (byte, 8139 only) */
+#define RTL_MSR 0x58
+#define RTL_MSR_TXFCE		0x80	/**< TX flow control enabled */
+#define RTL_MSR_RXFCE		0x40	/**< RX flow control enabled */
+#define RTL_MSR_AUX_STATUS	0x10	/**< Aux power present */
+#define RTL_MSR_SPEED_10	0x08	/**< 10Mbps */
+#define RTL_MSR_LINKB		0x04	/**< Inverse of link status */
+#define RTL_MSR_TXPF		0x02	/**< TX pause flag */
+#define RTL_MSR_RXPF		0x01	/**< RX pause flag */
+
+/** PHY Access Register (dword, 8169 only) */
+#define RTL_PHYAR 0x60
+#define RTL_PHYAR_FLAG		0x80000000UL /**< Read/write flag */
+
+/** Construct PHY Access Register value */
+#define RTL_PHYAR_VALUE( flag, reg, data ) ( (flag) | ( (reg) << 16 ) | (data) )
+
+/** Extract PHY Access Register data */
+#define RTL_PHYAR_DATA( value ) ( (value) & 0xffff )
+
+/** Maximum time to wait for PHY access, in microseconds */
+#define RTL_MII_MAX_WAIT_US 500
+
+/** PHY (GMII, MII, or TBI) Status Register (byte, 8169 only) */
+#define RTL_PHYSTATUS 0x6c
+#define RTL_PHYSTATUS_ENTBI	0x80	/**< TBI / GMII mode */
+#define RTL_PHYSTATUS_TXFLOW	0x40	/**< TX flow control enabled */
+#define RTL_PHYSTATUS_RXFLOW	0x20	/**< RX flow control enabled */
+#define RTL_PHYSTATUS_1000MF	0x10	/**< 1000Mbps full-duplex */
+#define RTL_PHYSTATUS_100M	0x08	/**< 100Mbps */
+#define RTL_PHYSTATUS_10M	0x04	/**< 10Mbps */
+#define RTL_PHYSTATUS_LINKSTS	0x02	/**< Link ok */
+#define RTL_PHYSTATUS_FULLDUP	0x01	/**< Full duplex */
+
+/** Transmit Priority Polling Register (byte, 8139C+ only) */
+#define RTL_TPPOLL_8139CP 0xd9
+
+/** RX Packet Maximum Size Register (word) */
+#define RTL_RMS 0xda
+
+/** C+ Command Register (word) */
+#define RTL_CPCR 0xe0
+#define RTL_CPCR_DAC		0x0010	/**< PCI Dual Address Cycle Enable */
+#define RTL_CPCR_MULRW		0x0008	/**< PCI Multiple Read/Write Enable */
+#define RTL_CPCR_CPRX		0x0002	/**< C+ receive enable */
+#define RTL_CPCR_CPTX		0x0001	/**< C+ transmit enable */
+
+/** Receive Descriptor Start Address Register (qword) */
+#define RTL_RDSAR 0xe4
+
+/** Number of receive descriptors */
+#define RTL_NUM_RX_DESC 4
+
+/** Receive buffer length */
+#define RTL_RX_MAX_LEN \
+	( ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */ + 4 /* extra space */ )
+
+/** A Realtek descriptor ring */
+struct realtek_ring {
+	/** Descriptors */
+	struct realtek_descriptor *desc;
+	/** Producer index */
+	unsigned int prod;
+	/** Consumer index */
+	unsigned int cons;
+
+	/** Descriptor start address register */
+	unsigned int reg;
+	/** Length (in bytes) */
+	size_t len;
+};
+
+/**
+ * Initialise descriptor ring
+ *
+ * @v ring		Descriptor ring
+ * @v count		Number of descriptors
+ * @v reg		Descriptor start address register
+ */
+static inline __attribute__ (( always_inline)) void
+realtek_init_ring ( struct realtek_ring *ring, unsigned int count,
+		    unsigned int reg ) {
+	ring->len = ( count * sizeof ( ring->desc[0] ) );
+	ring->reg = reg;
+}
+
+/** A Realtek network card */
+struct realtek_nic {
+	/** Registers */
+	void *regs;
+	/** SPI bit-bashing interface */
+	struct spi_bit_basher spibit;
+	/** EEPROM */
+	struct spi_device eeprom;
+	/** Non-volatile options */
+	struct nvo_block nvo;
+	/** MII interface */
+	struct mii_interface mii;
+
+	/** Legacy datapath mode */
+	int legacy;
+	/** PHYAR and PHYSTATUS registers are present */
+	int have_phy_regs;
+	/** TPPoll register offset */
+	unsigned int tppoll;
+
+	/** Transmit descriptor ring */
+	struct realtek_ring tx;
+	/** Receive descriptor ring */
+	struct realtek_ring rx;
+	/** Receive I/O buffers */
+	struct io_buffer *rx_iobuf[RTL_NUM_RX_DESC];
+	/** Receive buffer (legacy mode) */
+	void *rx_buffer;
+	/** Offset within receive buffer (legacy mode) */
+	unsigned int rx_offset;
+};
+
+#endif /* _REALTEK_H */