Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 484 deletions

diff --git a/qemu/roms/ipxe/src/drivers/net/intelx.c b/qemu/roms/ipxe/src/drivers/net/intelx.c
deleted file mode 100644
index 982b74f12..000000000
--- a/qemu/roms/ipxe/src/drivers/net/intelx.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * Copyright (C) 2013 Michael Brown <mbrown@fensystems.co.uk>.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- * You can also choose to distribute this program under the terms of
- * the Unmodified Binary Distribution Licence (as given in the file
- * COPYING.UBDL), provided that you have satisfied its requirements.
- */
-
-FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
-
-#include <stdint.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <byteswap.h>
-#include <ipxe/netdevice.h>
-#include <ipxe/ethernet.h>
-#include <ipxe/if_ether.h>
-#include <ipxe/iobuf.h>
-#include <ipxe/malloc.h>
-#include <ipxe/pci.h>
-#include "intelx.h"
-
-/** @file
- *
- * Intel 10 Gigabit Ethernet network card driver
- *
- */
-
-/******************************************************************************
- *
- * MAC address
- *
- ******************************************************************************
- */
-
-/**
- * Try to fetch initial MAC address
- *
- * @v intel		Intel device
- * @v ral0		RAL0 register address
- * @v hw_addr		Hardware address to fill in
- * @ret rc		Return status code
- */
-static int intelx_try_fetch_mac ( struct intel_nic *intel, unsigned int ral0,
-				  uint8_t *hw_addr ) {
-	union intel_receive_address mac;
-
-	/* Read current address from RAL0/RAH0 */
-	mac.reg.low = cpu_to_le32 ( readl ( intel->regs + ral0 ) );
-	mac.reg.high = cpu_to_le32 ( readl ( intel->regs + ral0 +
-					     ( INTELX_RAH0 - INTELX_RAL0 ) ) );
-
-	/* Use current address if valid */
-	if ( is_valid_ether_addr ( mac.raw ) ) {
-		DBGC ( intel, "INTEL %p has autoloaded MAC address %s at "
-		       "%#05x\n", intel, eth_ntoa ( mac.raw ), ral0 );
-		memcpy ( hw_addr, mac.raw, ETH_ALEN );
-		return 0;
-	}
-
-	return -ENOENT;
-}
-
-/**
- * Fetch initial MAC address
- *
- * @v intel		Intel device
- * @v hw_addr		Hardware address to fill in
- * @ret rc		Return status code
- */
-static int intelx_fetch_mac ( struct intel_nic *intel, uint8_t *hw_addr ) {
-	int rc;
-
-	/* Try to fetch address from INTELX_RAL0 */
-	if ( ( rc = intelx_try_fetch_mac ( intel, INTELX_RAL0,
-					   hw_addr ) ) == 0 ) {
-		return 0;
-	}
-
-	/* Try to fetch address from INTELX_RAL0_ALT */
-	if ( ( rc = intelx_try_fetch_mac ( intel, INTELX_RAL0_ALT,
-					   hw_addr ) ) == 0 ) {
-		return 0;
-	}
-
-	DBGC ( intel, "INTEL %p has no MAC address to use\n", intel );
-	return -ENOENT;
-}
-
-/******************************************************************************
- *
- * Device reset
- *
- ******************************************************************************
- */
-
-/**
- * Reset hardware
- *
- * @v intel		Intel device
- * @ret rc		Return status code
- */
-static int intelx_reset ( struct intel_nic *intel ) {
-	uint32_t ctrl;
-
-	/* Perform a global software reset */
-	ctrl = readl ( intel->regs + INTELX_CTRL );
-	writel ( ( ctrl | INTELX_CTRL_RST | INTELX_CTRL_LRST ),
-		 intel->regs + INTELX_CTRL );
-	mdelay ( INTELX_RESET_DELAY_MS );
-
-	DBGC ( intel, "INTEL %p reset (ctrl %08x)\n", intel, ctrl );
-	return 0;
-}
-
-/******************************************************************************
- *
- * Link state
- *
- ******************************************************************************
- */
-
-/**
- * Check link state
- *
- * @v netdev		Network device
- */
-static void intelx_check_link ( struct net_device *netdev ) {
-	struct intel_nic *intel = netdev->priv;
-	uint32_t links;
-
-	/* Read link status */
-	links = readl ( intel->regs + INTELX_LINKS );
-	DBGC ( intel, "INTEL %p link status is %08x\n", intel, links );
-
-	/* Update network device */
-	if ( links & INTELX_LINKS_UP ) {
-		netdev_link_up ( netdev );
-	} else {
-		netdev_link_down ( netdev );
-	}
-}
-
-/******************************************************************************
- *
- * Network device interface
- *
- ******************************************************************************
- */
-
-/**
- * Open network device
- *
- * @v netdev		Network device
- * @ret rc		Return status code
- */
-static int intelx_open ( struct net_device *netdev ) {
-	struct intel_nic *intel = netdev->priv;
-	union intel_receive_address mac;
-	uint32_t ral0;
-	uint32_t rah0;
-	uint32_t dmatxctl;
-	uint32_t fctrl;
-	uint32_t srrctl;
-	uint32_t hlreg0;
-	uint32_t maxfrs;
-	uint32_t rdrxctl;
-	uint32_t rxctrl;
-	uint32_t dca_rxctrl;
-	int rc;
-
-	/* Create transmit descriptor ring */
-	if ( ( rc = intel_create_ring ( intel, &intel->tx ) ) != 0 )
-		goto err_create_tx;
-
-	/* Create receive descriptor ring */
-	if ( ( rc = intel_create_ring ( intel, &intel->rx ) ) != 0 )
-		goto err_create_rx;
-
-	/* Program MAC address */
-	memset ( &mac, 0, sizeof ( mac ) );
-	memcpy ( mac.raw, netdev->ll_addr, sizeof ( mac.raw ) );
-	ral0 = le32_to_cpu ( mac.reg.low );
-	rah0 = ( le32_to_cpu ( mac.reg.high ) | INTELX_RAH0_AV );
-	writel ( ral0, intel->regs + INTELX_RAL0 );
-	writel ( rah0, intel->regs + INTELX_RAH0 );
-	writel ( ral0, intel->regs + INTELX_RAL0_ALT );
-	writel ( rah0, intel->regs + INTELX_RAH0_ALT );
-
-	/* Allocate interrupt vectors */
-	writel ( ( INTELX_IVAR_RX0_DEFAULT | INTELX_IVAR_RX0_VALID |
-		   INTELX_IVAR_TX0_DEFAULT | INTELX_IVAR_TX0_VALID ),
-		 intel->regs + INTELX_IVAR );
-
-	/* Enable transmitter  */
-	dmatxctl = readl ( intel->regs + INTELX_DMATXCTL );
-	dmatxctl |= INTELX_DMATXCTL_TE;
-	writel ( dmatxctl, intel->regs + INTELX_DMATXCTL );
-
-	/* Configure receive filter */
-	fctrl = readl ( intel->regs + INTELX_FCTRL );
-	fctrl |= ( INTELX_FCTRL_BAM | INTELX_FCTRL_UPE | INTELX_FCTRL_MPE );
-	writel ( fctrl, intel->regs + INTELX_FCTRL );
-
-	/* Configure receive buffer sizes */
-	srrctl = readl ( intel->regs + INTELX_SRRCTL );
-	srrctl &= ~INTELX_SRRCTL_BSIZE_MASK;
-	srrctl |= INTELX_SRRCTL_BSIZE_DEFAULT;
-	writel ( srrctl, intel->regs + INTELX_SRRCTL );
-
-	/* Configure jumbo frames.  Required to allow the extra 4-byte
-	 * headroom for VLANs, since we don't use the hardware's
-	 * native VLAN offload.
-	 */
-	hlreg0 = readl ( intel->regs + INTELX_HLREG0 );
-	hlreg0 |= INTELX_HLREG0_JUMBOEN;
-	writel ( hlreg0, intel->regs + INTELX_HLREG0 );
-
-	/* Configure frame size */
-	maxfrs = readl ( intel->regs + INTELX_MAXFRS );
-	maxfrs &= ~INTELX_MAXFRS_MFS_MASK;
-	maxfrs |= INTELX_MAXFRS_MFS_DEFAULT;
-	writel ( maxfrs, intel->regs + INTELX_MAXFRS );
-
-	/* Configure receive DMA */
-	rdrxctl = readl ( intel->regs + INTELX_RDRXCTL );
-	rdrxctl |= INTELX_RDRXCTL_SECRC;
-	writel ( rdrxctl, intel->regs + INTELX_RDRXCTL );
-
-	/* Clear "must-be-zero" bit for direct cache access (DCA).  We
-	 * leave DCA disabled anyway, but if we do not clear this bit
-	 * then the received packets contain garbage data.
-	 */
-	dca_rxctrl = readl ( intel->regs + INTELX_DCA_RXCTRL );
-	dca_rxctrl &= ~INTELX_DCA_RXCTRL_MUST_BE_ZERO;
-	writel ( dca_rxctrl, intel->regs + INTELX_DCA_RXCTRL );
-
-	/* Enable receiver */
-	rxctrl = readl ( intel->regs + INTELX_RXCTRL );
-	rxctrl |= INTELX_RXCTRL_RXEN;
-	writel ( rxctrl, intel->regs + INTELX_RXCTRL );
-
-	/* Fill receive ring */
-	intel_refill_rx ( intel );
-
-	/* Update link state */
-	intelx_check_link ( netdev );
-
-	return 0;
-
-	intel_destroy_ring ( intel, &intel->rx );
- err_create_rx:
-	intel_destroy_ring ( intel, &intel->tx );
- err_create_tx:
-	return rc;
-}
-
-/**
- * Close network device
- *
- * @v netdev		Network device
- */
-static void intelx_close ( struct net_device *netdev ) {
-	struct intel_nic *intel = netdev->priv;
-	uint32_t rxctrl;
-	uint32_t dmatxctl;
-
-	/* Disable receiver */
-	rxctrl = readl ( intel->regs + INTELX_RXCTRL );
-	rxctrl &= ~INTELX_RXCTRL_RXEN;
-	writel ( rxctrl, intel->regs + INTELX_RXCTRL );
-
-	/* Disable transmitter  */
-	dmatxctl = readl ( intel->regs + INTELX_DMATXCTL );
-	dmatxctl &= ~INTELX_DMATXCTL_TE;
-	writel ( dmatxctl, intel->regs + INTELX_DMATXCTL );
-
-	/* Destroy receive descriptor ring */
-	intel_destroy_ring ( intel, &intel->rx );
-
-	/* Discard any unused receive buffers */
-	intel_empty_rx ( intel );
-
-	/* Destroy transmit descriptor ring */
-	intel_destroy_ring ( intel, &intel->tx );
-
-	/* Reset the NIC, to flush the transmit and receive FIFOs */
-	intelx_reset ( intel );
-}
-
-/**
- * Poll for completed and received packets
- *
- * @v netdev		Network device
- */
-static void intelx_poll ( struct net_device *netdev ) {
-	struct intel_nic *intel = netdev->priv;
-	uint32_t eicr;
-
-	/* Check for and acknowledge interrupts */
-	eicr = readl ( intel->regs + INTELX_EICR );
-	if ( ! eicr )
-		return;
-
-	/* Poll for TX completions, if applicable */
-	if ( eicr & INTELX_EIRQ_TX0 )
-		intel_poll_tx ( netdev );
-
-	/* Poll for RX completions, if applicable */
-	if ( eicr & ( INTELX_EIRQ_RX0 | INTELX_EIRQ_RXO ) )
-		intel_poll_rx ( netdev );
-
-	/* Report receive overruns */
-	if ( eicr & INTELX_EIRQ_RXO )
-		netdev_rx_err ( netdev, NULL, -ENOBUFS );
-
-	/* Check link state, if applicable */
-	if ( eicr & INTELX_EIRQ_LSC )
-		intelx_check_link ( netdev );
-
-	/* Refill RX ring */
-	intel_refill_rx ( intel );
-}
-
-/**
- * Enable or disable interrupts
- *
- * @v netdev		Network device
- * @v enable		Interrupts should be enabled
- */
-static void intelx_irq ( struct net_device *netdev, int enable ) {
-	struct intel_nic *intel = netdev->priv;
-	uint32_t mask;
-
-	mask = ( INTELX_EIRQ_LSC | INTELX_EIRQ_RXO | INTELX_EIRQ_TX0 |
-		 INTELX_EIRQ_RX0 );
-	if ( enable ) {
-		writel ( mask, intel->regs + INTELX_EIMS );
-	} else {
-		writel ( mask, intel->regs + INTELX_EIMC );
-	}
-}
-
-/** Network device operations */
-static struct net_device_operations intelx_operations = {
-	.open		= intelx_open,
-	.close		= intelx_close,
-	.transmit	= intel_transmit,
-	.poll		= intelx_poll,
-	.irq		= intelx_irq,
-};
-
-/******************************************************************************
- *
- * PCI interface
- *
- ******************************************************************************
- */
-
-/**
- * Probe PCI device
- *
- * @v pci		PCI device
- * @ret rc		Return status code
- */
-static int intelx_probe ( struct pci_device *pci ) {
-	struct net_device *netdev;
-	struct intel_nic *intel;
-	int rc;
-
-	/* Allocate and initialise net device */
-	netdev = alloc_etherdev ( sizeof ( *intel ) );
-	if ( ! netdev ) {
-		rc = -ENOMEM;
-		goto err_alloc;
-	}
-	netdev_init ( netdev, &intelx_operations );
-	intel = netdev->priv;
-	pci_set_drvdata ( pci, netdev );
-	netdev->dev = &pci->dev;
-	memset ( intel, 0, sizeof ( *intel ) );
-	intel->port = PCI_FUNC ( pci->busdevfn );
-	intel_init_ring ( &intel->tx, INTEL_NUM_TX_DESC, INTELX_TD,
-			  intel_describe_tx );
-	intel_init_ring ( &intel->rx, INTEL_NUM_RX_DESC, INTELX_RD,
-			  intel_describe_rx );
-
-	/* Fix up PCI device */
-	adjust_pci_device ( pci );
-
-	/* Map registers */
-	intel->regs = ioremap ( pci->membase, INTEL_BAR_SIZE );
-	if ( ! intel->regs ) {
-		rc = -ENODEV;
-		goto err_ioremap;
-	}
-
-	/* Reset the NIC */
-	if ( ( rc = intelx_reset ( intel ) ) != 0 )
-		goto err_reset;
-
-	/* Fetch MAC address */
-	if ( ( rc = intelx_fetch_mac ( intel, netdev->hw_addr ) ) != 0 )
-		goto err_fetch_mac;
-
-	/* Register network device */
-	if ( ( rc = register_netdev ( netdev ) ) != 0 )
-		goto err_register_netdev;
-
-	/* Set initial link state */
-	intelx_check_link ( netdev );
-
-	return 0;
-
-	unregister_netdev ( netdev );
- err_register_netdev:
- err_fetch_mac:
-	intelx_reset ( intel );
- err_reset:
-	iounmap ( intel->regs );
- err_ioremap:
-	netdev_nullify ( netdev );
-	netdev_put ( netdev );
- err_alloc:
-	return rc;
-}
-
-/**
- * Remove PCI device
- *
- * @v pci		PCI device
- */
-static void intelx_remove ( struct pci_device *pci ) {
-	struct net_device *netdev = pci_get_drvdata ( pci );
-	struct intel_nic *intel = netdev->priv;
-
-	/* Unregister network device */
-	unregister_netdev ( netdev );
-
-	/* Reset the NIC */
-	intelx_reset ( intel );
-
-	/* Free network device */
-	iounmap ( intel->regs );
-	netdev_nullify ( netdev );
-	netdev_put ( netdev );
-}
-
-/** PCI device IDs */
-static struct pci_device_id intelx_nics[] = {
-	PCI_ROM ( 0x8086, 0x10f7, "82599-kx4", "82599 (KX/KX4)", 0 ),
-	PCI_ROM ( 0x8086, 0x10f8, "82599-combo-backplane", "82599 (combined backplane; KR/KX4/KX)", 0 ),
-	PCI_ROM ( 0x8086, 0x10f9, "82599-cx4", "82599 (CX4)", 0 ),
-	PCI_ROM ( 0x8086, 0x10fb, "82599-sfp", "82599 (SFI/SFP+)", 0 ),
-	PCI_ROM ( 0x8086, 0x10fc, "82599-xaui", "82599 (XAUI/BX4)", 0 ),
-	PCI_ROM ( 0x8086, 0x1528, "x540t", "X540-AT2/X540-BT2", 0 ),
-	PCI_ROM ( 0x8086, 0x154d, "82599-sfp-sf2", "82599 (SFI/SFP+)", 0 ),
-	PCI_ROM ( 0x8086, 0x1557, "82599en-sfp", "82599 (Single Port SFI Only)", 0 ),
-	PCI_ROM ( 0x8086, 0x1560, "x540t1", "X540-AT2/X540-BT2 (with single port NVM)", 0 ),
-};
-
-/** PCI driver */
-struct pci_driver intelx_driver __pci_driver = {
-	.ids = intelx_nics,
-	.id_count = ( sizeof ( intelx_nics ) / sizeof ( intelx_nics[0] ) ),
-	.probe = intelx_probe,
-	.remove = intelx_remove,
-};