summaryrefslogtreecommitdiffstats
path: root/qemu/roms/ipxe/src/drivers/net/depca.c
diff options
context:
space:
mode:
authorYang Zhang <yang.z.zhang@intel.com>2015-08-28 09:58:54 +0800
committerYang Zhang <yang.z.zhang@intel.com>2015-09-01 12:44:00 +0800
commite44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch)
tree66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/ipxe/src/drivers/net/depca.c
parent9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff)
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/ipxe/src/drivers/net/depca.c')
-rw-r--r--qemu/roms/ipxe/src/drivers/net/depca.c804
1 files changed, 804 insertions, 0 deletions
diff --git a/qemu/roms/ipxe/src/drivers/net/depca.c b/qemu/roms/ipxe/src/drivers/net/depca.c
new file mode 100644
index 000000000..016f28bb2
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/depca.c
@@ -0,0 +1,804 @@
+/* #warning "depca.c: FIXME: fix relocation" */
+
+FILE_LICENCE ( GPL_ANY );
+
+#if 0
+/* Not fixed for relocation yet. Probably won't work relocated above 16MB */
+#ifdef ALLMULTI
+#error multicast support is not yet implemented
+#endif
+/* Etherboot: depca.h merged, comments from Linux driver retained */
+/* depca.c: A DIGITAL DEPCA & EtherWORKS ethernet driver for linux.
+
+ Written 1994, 1995 by David C. Davies.
+
+
+ Copyright 1994 David C. Davies
+ and
+ United States Government
+ (as represented by the Director, National Security Agency).
+
+ Copyright 1995 Digital Equipment Corporation.
+
+
+ This software may be used and distributed according to the terms of
+ the GNU Public License, incorporated herein by reference.
+
+ This driver is written for the Digital Equipment Corporation series
+ of DEPCA and EtherWORKS ethernet cards:
+
+ DEPCA (the original)
+ DE100
+ DE101
+ DE200 Turbo
+ DE201 Turbo
+ DE202 Turbo (TP BNC)
+ DE210
+ DE422 (EISA)
+
+ The driver has been tested on DE100, DE200 and DE202 cards in a
+ relatively busy network. The DE422 has been tested a little.
+
+ This driver will NOT work for the DE203, DE204 and DE205 series of
+ cards, since they have a new custom ASIC in place of the AMD LANCE
+ chip. See the 'ewrk3.c' driver in the Linux source tree for running
+ those cards.
+
+ I have benchmarked the driver with a DE100 at 595kB/s to (542kB/s from)
+ a DECstation 5000/200.
+
+ The author may be reached at davies@maniac.ultranet.com
+
+ =========================================================================
+
+ The driver was originally based on the 'lance.c' driver from Donald
+ Becker which is included with the standard driver distribution for
+ linux. V0.4 is a complete re-write with only the kernel interface
+ remaining from the original code.
+
+ 1) Lance.c code in /linux/drivers/net/
+ 2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook",
+ AMD, 1992 [(800) 222-9323].
+ 3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)",
+ AMD, Pub. #17881, May 1993.
+ 4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA",
+ AMD, Pub. #16907, May 1992
+ 5) "DEC EtherWORKS LC Ethernet Controller Owners Manual",
+ Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003
+ 6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual",
+ Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003
+ 7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR
+ Digital Equipment Corporation, 1989
+ 8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual",
+ Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001
+
+
+ Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this
+ driver.
+
+ The original DEPCA card requires that the ethernet ROM address counter
+ be enabled to count and has an 8 bit NICSR. The ROM counter enabling is
+ only done when a 0x08 is read as the first address octet (to minimise
+ the chances of writing over some other hardware's I/O register). The
+ NICSR accesses have been changed to byte accesses for all the cards
+ supported by this driver, since there is only one useful bit in the MSB
+ (remote boot timeout) and it is not used. Also, there is a maximum of
+ only 48kB network RAM for this card. My thanks to Torbjorn Lindh for
+ help debugging all this (and holding my feet to the fire until I got it
+ right).
+
+ The DE200 series boards have on-board 64kB RAM for use as a shared
+ memory network buffer. Only the DE100 cards make use of a 2kB buffer
+ mode which has not been implemented in this driver (only the 32kB and
+ 64kB modes are supported [16kB/48kB for the original DEPCA]).
+
+ At the most only 2 DEPCA cards can be supported on the ISA bus because
+ there is only provision for two I/O base addresses on each card (0x300
+ and 0x200). The I/O address is detected by searching for a byte sequence
+ in the Ethernet station address PROM at the expected I/O address for the
+ Ethernet PROM. The shared memory base address is 'autoprobed' by
+ looking for the self test PROM and detecting the card name. When a
+ second DEPCA is detected, information is placed in the base_addr
+ variable of the next device structure (which is created if necessary),
+ thus enabling ethif_probe initialization for the device. More than 2
+ EISA cards can be supported, but care will be needed assigning the
+ shared memory to ensure that each slot has the correct IRQ, I/O address
+ and shared memory address assigned.
+
+ ************************************************************************
+
+ NOTE: If you are using two ISA DEPCAs, it is important that you assign
+ the base memory addresses correctly. The driver autoprobes I/O 0x300
+ then 0x200. The base memory address for the first device must be less
+ than that of the second so that the auto probe will correctly assign the
+ I/O and memory addresses on the same card. I can't think of a way to do
+ this unambiguously at the moment, since there is nothing on the cards to
+ tie I/O and memory information together.
+
+ I am unable to test 2 cards together for now, so this code is
+ unchecked. All reports, good or bad, are welcome.
+
+ ************************************************************************
+
+ The board IRQ setting must be at an unused IRQ which is auto-probed
+ using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are
+ {2,3,4,5,7}, whereas the DE200 is at {5,9,10,11,15}. Note that IRQ2 is
+ really IRQ9 in machines with 16 IRQ lines.
+
+ No 16MB memory limitation should exist with this driver as DMA is not
+ used and the common memory area is in low memory on the network card (my
+ current system has 20MB and I've not had problems yet).
+
+ The ability to load this driver as a loadable module has been added. To
+ utilise this ability, you have to do <8 things:
+
+ 0) have a copy of the loadable modules code installed on your system.
+ 1) copy depca.c from the /linux/drivers/net directory to your favourite
+ temporary directory.
+ 2) if you wish, edit the source code near line 1530 to reflect the I/O
+ address and IRQ you're using (see also 5).
+ 3) compile depca.c, but include -DMODULE in the command line to ensure
+ that the correct bits are compiled (see end of source code).
+ 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
+ kernel with the depca configuration turned off and reboot.
+ 5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
+ [Alan Cox: Changed the code to allow command line irq/io assignments]
+ [Dave Davies: Changed the code to allow command line mem/name
+ assignments]
+ 6) run the net startup bits for your eth?? interface manually
+ (usually /etc/rc.inet[12] at boot time).
+ 7) enjoy!
+
+ Note that autoprobing is not allowed in loadable modules - the system is
+ already up and running and you're messing with interrupts.
+
+ To unload a module, turn off the associated interface
+ 'ifconfig eth?? down' then 'rmmod depca'.
+
+ To assign a base memory address for the shared memory when running as a
+ loadable module, see 5 above. To include the adapter name (if you have
+ no PROM but know the card name) also see 5 above. Note that this last
+ option will not work with kernel built-in depca's.
+
+ The shared memory assignment for a loadable module makes sense to avoid
+ the 'memory autoprobe' picking the wrong shared memory (for the case of
+ 2 depca's in a PC).
+
+ ************************************************************************
+ Support for MCA EtherWORKS cards added 11-3-98.
+ Verified to work with up to 2 DE212 cards in a system (although not
+ fully stress-tested).
+
+ Currently known bugs/limitations:
+
+ Note: with the MCA stuff as a module, it trusts the MCA configuration,
+ not the command line for IRQ and memory address. You can
+ specify them if you want, but it will throw your values out.
+ You still have to pass the IO address it was configured as
+ though.
+
+ ************************************************************************
+ TO DO:
+ ------
+
+
+ Revision History
+ ----------------
+
+ Version Date Description
+
+ 0.1 25-jan-94 Initial writing.
+ 0.2 27-jan-94 Added LANCE TX hardware buffer chaining.
+ 0.3 1-feb-94 Added multiple DEPCA support.
+ 0.31 4-feb-94 Added DE202 recognition.
+ 0.32 19-feb-94 Tidy up. Improve multi-DEPCA support.
+ 0.33 25-feb-94 Fix DEPCA ethernet ROM counter enable.
+ Add jabber packet fix from murf@perftech.com
+ and becker@super.org
+ 0.34 7-mar-94 Fix DEPCA max network memory RAM & NICSR access.
+ 0.35 8-mar-94 Added DE201 recognition. Tidied up.
+ 0.351 30-apr-94 Added EISA support. Added DE422 recognition.
+ 0.36 16-may-94 DE422 fix released.
+ 0.37 22-jul-94 Added MODULE support
+ 0.38 15-aug-94 Added DBR ROM switch in depca_close().
+ Multi DEPCA bug fix.
+ 0.38axp 15-sep-94 Special version for Alpha AXP Linux V1.0.
+ 0.381 12-dec-94 Added DE101 recognition, fix multicast bug.
+ 0.382 9-feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+ 0.383 22-feb-95 Fix for conflict with VESA SCSI reported by
+ <stromain@alf.dec.com>
+ 0.384 17-mar-95 Fix a ring full bug reported by <bkm@star.rl.ac.uk>
+ 0.385 3-apr-95 Fix a recognition bug reported by
+ <ryan.niemi@lastfrontier.com>
+ 0.386 21-apr-95 Fix the last fix...sorry, must be galloping senility
+ 0.40 25-May-95 Rewrite for portability & updated.
+ ALPHA support from <jestabro@amt.tay1.dec.com>
+ 0.41 26-Jun-95 Added verify_area() calls in depca_ioctl() from
+ suggestion by <heiko@colossus.escape.de>
+ 0.42 27-Dec-95 Add 'mem' shared memory assignment for loadable
+ modules.
+ Add 'adapter_name' for loadable modules when no PROM.
+ Both above from a suggestion by
+ <pchen@woodruffs121.residence.gatech.edu>.
+ Add new multicasting code.
+ 0.421 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi>
+ 0.422 29-Apr-96 Fix depca_hw_init() bug <jari@markkus2.fimr.fi>
+ 0.423 7-Jun-96 Fix module load bug <kmg@barco.be>
+ 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c
+ 0.44 1-Sep-97 Fix *_probe() to test check_region() first - bug
+ reported by <mmogilvi@elbert.uccs.edu>
+ 0.45 3-Nov-98 Added support for MCA EtherWORKS (DE210/DE212) cards
+ by <tymm@computer.org>
+ 0.451 5-Nov-98 Fixed mca stuff cuz I'm a dummy. <tymm@computer.org>
+ 0.5 14-Nov-98 Re-spin for 2.1.x kernels.
+ 0.51 27-Jun-99 Correct received packet length for CRC from
+ report by <worm@dkik.dk>
+
+ =========================================================================
+*/
+
+#include "etherboot.h"
+#include "nic.h"
+#include <ipxe/isa.h>
+#include <ipxe/ethernet.h>
+
+/*
+** I/O addresses. Note that the 2k buffer option is not supported in
+** this driver.
+*/
+#define DEPCA_NICSR 0x00 /* Network interface CSR */
+#define DEPCA_RBI 0x02 /* RAM buffer index (2k buffer mode) */
+#define DEPCA_DATA 0x04 /* LANCE registers' data port */
+#define DEPCA_ADDR 0x06 /* LANCE registers' address port */
+#define DEPCA_HBASE 0x08 /* EISA high memory base address reg. */
+#define DEPCA_PROM 0x0c /* Ethernet address ROM data port */
+#define DEPCA_CNFG 0x0c /* EISA Configuration port */
+#define DEPCA_RBSA 0x0e /* RAM buffer starting address (2k buff.) */
+
+/*
+** These are LANCE registers addressable through nic->ioaddr + DEPCA_ADDR
+*/
+#define CSR0 0
+#define CSR1 1
+#define CSR2 2
+#define CSR3 3
+
+/*
+** NETWORK INTERFACE CSR (NI_CSR) bit definitions
+*/
+
+#define TO 0x0100 /* Time Out for remote boot */
+#define SHE 0x0080 /* SHadow memory Enable */
+#define BS 0x0040 /* Bank Select */
+#define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */
+#define RBE 0x0010 /* Remote Boot Enable (1->net boot) */
+#define AAC 0x0008 /* Address ROM Address Counter (1->enable) */
+#define _128KB 0x0008 /* 128kB Network RAM (1->enable) */
+#define IM 0x0004 /* Interrupt Mask (1->mask) */
+#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */
+#define LED 0x0001 /* LED control */
+
+/*
+** Control and Status Register 0 (CSR0) bit definitions
+*/
+
+#define ERR 0x8000 /* Error summary */
+#define BABL 0x4000 /* Babble transmitter timeout error */
+#define CERR 0x2000 /* Collision Error */
+#define MISS 0x1000 /* Missed packet */
+#define MERR 0x0800 /* Memory Error */
+#define RINT 0x0400 /* Receiver Interrupt */
+#define TINT 0x0200 /* Transmit Interrupt */
+#define IDON 0x0100 /* Initialization Done */
+#define INTR 0x0080 /* Interrupt Flag */
+#define INEA 0x0040 /* Interrupt Enable */
+#define RXON 0x0020 /* Receiver on */
+#define TXON 0x0010 /* Transmitter on */
+#define TDMD 0x0008 /* Transmit Demand */
+#define STOP 0x0004 /* Stop */
+#define STRT 0x0002 /* Start */
+#define INIT 0x0001 /* Initialize */
+#define INTM 0xff00 /* Interrupt Mask */
+#define INTE 0xfff0 /* Interrupt Enable */
+
+/*
+** CONTROL AND STATUS REGISTER 3 (CSR3)
+*/
+
+#define BSWP 0x0004 /* Byte SWaP */
+#define ACON 0x0002 /* ALE control */
+#define BCON 0x0001 /* Byte CONtrol */
+
+/*
+** Initialization Block Mode Register
+*/
+
+#define PROM 0x8000 /* Promiscuous Mode */
+#define EMBA 0x0080 /* Enable Modified Back-off Algorithm */
+#define INTL 0x0040 /* Internal Loopback */
+#define DRTY 0x0020 /* Disable Retry */
+#define COLL 0x0010 /* Force Collision */
+#define DTCR 0x0008 /* Disable Transmit CRC */
+#define LOOP 0x0004 /* Loopback */
+#define DTX 0x0002 /* Disable the Transmitter */
+#define DRX 0x0001 /* Disable the Receiver */
+
+/*
+** Receive Message Descriptor 1 (RMD1) bit definitions.
+*/
+
+#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
+#define R_ERR 0x4000 /* Error Summary */
+#define R_FRAM 0x2000 /* Framing Error */
+#define R_OFLO 0x1000 /* Overflow Error */
+#define R_CRC 0x0800 /* CRC Error */
+#define R_BUFF 0x0400 /* Buffer Error */
+#define R_STP 0x0200 /* Start of Packet */
+#define R_ENP 0x0100 /* End of Packet */
+
+/*
+** Transmit Message Descriptor 1 (TMD1) bit definitions.
+*/
+
+#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
+#define T_ERR 0x4000 /* Error Summary */
+#define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */
+#define T_MORE 0x1000 /* >1 retry to transmit packet */
+#define T_ONE 0x0800 /* 1 try needed to transmit the packet */
+#define T_DEF 0x0400 /* Deferred */
+#define T_STP 0x02000000 /* Start of Packet */
+#define T_ENP 0x01000000 /* End of Packet */
+#define T_FLAGS 0xff000000 /* TX Flags Field */
+
+/*
+** Transmit Message Descriptor 3 (TMD3) bit definitions.
+*/
+
+#define TMD3_BUFF 0x8000 /* BUFFer error */
+#define TMD3_UFLO 0x4000 /* UnderFLOw error */
+#define TMD3_RES 0x2000 /* REServed */
+#define TMD3_LCOL 0x1000 /* Late COLlision */
+#define TMD3_LCAR 0x0800 /* Loss of CARrier */
+#define TMD3_RTRY 0x0400 /* ReTRY error */
+
+/*
+** Ethernet PROM defines
+*/
+#define PROBE_LENGTH 32
+
+/*
+** Set the number of Tx and Rx buffers. Ensure that the memory requested
+** here is <= to the amount of shared memory set up by the board switches.
+** The number of descriptors MUST BE A POWER OF 2.
+**
+** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ)
+*/
+#define NUM_RX_DESC 2 /* Number of RX descriptors */
+#define NUM_TX_DESC 2 /* Number of TX descriptors */
+#define RX_BUFF_SZ 1536 /* Buffer size for each Rx buffer */
+#define TX_BUFF_SZ 1536 /* Buffer size for each Tx buffer */
+
+/*
+** ISA Bus defines
+*/
+#ifndef DEPCA_MODEL
+#define DEPCA_MODEL DEPCA
+#endif
+
+static enum {
+ DEPCA, DE100, DE101, DE200, DE201, DE202, DE210, DE212, DE422, unknown
+} adapter = DEPCA_MODEL;
+
+/*
+** Name <-> Adapter mapping
+*/
+
+static char *adapter_name[] = {
+ "DEPCA",
+ "DE100","DE101",
+ "DE200","DE201","DE202",
+ "DE210","DE212",
+ "DE422",
+ ""
+};
+
+#ifndef DEPCA_RAM_BASE
+#define DEPCA_RAM_BASE 0xd0000
+#endif
+
+/*
+** Memory Alignment. Each descriptor is 4 longwords long. To force a
+** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
+** DESC_ALIGN. ALIGN aligns the start address of the private memory area
+** and hence the RX descriptor ring's first entry.
+*/
+#define ALIGN4 ((u32)4 - 1) /* 1 longword align */
+#define ALIGN8 ((u32)8 - 1) /* 2 longword (quadword) align */
+#define ALIGN ALIGN8 /* Keep the LANCE happy... */
+
+/*
+** The DEPCA Rx and Tx ring descriptors.
+*/
+struct depca_rx_desc {
+ volatile s32 base;
+ s16 buf_length; /* This length is negative 2's complement! */
+ s16 msg_length; /* This length is "normal". */
+};
+
+struct depca_tx_desc {
+ volatile s32 base;
+ s16 length; /* This length is negative 2's complement! */
+ s16 misc; /* Errors and TDR info */
+};
+
+#define LA_MASK 0x0000ffff /* LANCE address mask for mapping network RAM
+ to LANCE memory address space */
+
+/*
+** The Lance initialization block, described in databook, in common memory.
+*/
+struct depca_init {
+ u16 mode; /* Mode register */
+ u8 phys_addr[ETH_ALEN]; /* Physical ethernet address */
+ u8 mcast_table[8]; /* Multicast Hash Table. */
+ u32 rx_ring; /* Rx ring base pointer & ring length */
+ u32 tx_ring; /* Tx ring base pointer & ring length */
+};
+
+struct depca_private {
+ struct depca_rx_desc *rx_ring;
+ struct depca_tx_desc *tx_ring;
+ struct depca_init init_block; /* Shadow init block */
+ char *rx_memcpy[NUM_RX_DESC];
+ char *tx_memcpy[NUM_TX_DESC];
+ u32 bus_offset; /* ISA bus address offset */
+ u32 sh_mem; /* address of shared mem */
+ u32 dma_buffs; /* Rx & Tx buffer start */
+ int rx_cur, tx_cur; /* Next free ring entry */
+ int txRingMask, rxRingMask;
+ s32 rx_rlen, tx_rlen;
+ /* log2([rt]xRingMask+1) for the descriptors */
+};
+
+static Address mem_start = DEPCA_RAM_BASE;
+static Address mem_len, offset;
+static struct depca_private lp;
+
+/*
+** Miscellaneous defines...
+*/
+#define STOP_DEPCA(ioaddr) \
+ outw(CSR0, ioaddr + DEPCA_ADDR);\
+ outw(STOP, ioaddr + DEPCA_DATA)
+
+/* Initialize the lance Rx and Tx descriptor rings. */
+static void depca_init_ring(struct nic *nic)
+{
+ int i;
+ u32 p;
+
+ lp.rx_cur = lp.tx_cur = 0;
+ /* Initialize the base addresses and length of each buffer in the ring */
+ for (i = 0; i <= lp.rxRingMask; i++) {
+ writel((p = lp.dma_buffs + i * RX_BUFF_SZ) | R_OWN, &lp.rx_ring[i].base);
+ writew(-RX_BUFF_SZ, &lp.rx_ring[i].buf_length);
+ lp.rx_memcpy[i] = (char *) (p + lp.bus_offset);
+ }
+ for (i = 0; i <= lp.txRingMask; i++) {
+ writel((p = lp.dma_buffs + (i + lp.txRingMask + 1) * TX_BUFF_SZ) & 0x00ffffff, &lp.tx_ring[i].base);
+ lp.tx_memcpy[i] = (char *) (p + lp.bus_offset);
+ }
+
+ /* Set up the initialization block */
+ lp.init_block.rx_ring = ((u32) ((u32) lp.rx_ring) & LA_MASK) | lp.rx_rlen;
+ lp.init_block.tx_ring = ((u32) ((u32) lp.tx_ring) & LA_MASK) | lp.tx_rlen;
+ for (i = 0; i < ETH_ALEN; i++)
+ lp.init_block.phys_addr[i] = nic->node_addr[i];
+ lp.init_block.mode = 0x0000; /* Enable the Tx and Rx */
+ memset(lp.init_block.mcast_table, 0, sizeof(lp.init_block.mcast_table));
+}
+
+static inline void LoadCSRs(struct nic *nic)
+{
+ outw(CSR1, nic->ioaddr + DEPCA_ADDR); /* initialisation block address LSW */
+ outw((u16) (lp.sh_mem & LA_MASK), nic->ioaddr + DEPCA_DATA);
+ outw(CSR2, nic->ioaddr + DEPCA_ADDR); /* initialisation block address MSW */
+ outw((u16) ((lp.sh_mem & LA_MASK) >> 16), nic->ioaddr + DEPCA_DATA);
+ outw(CSR3, nic->ioaddr + DEPCA_ADDR); /* ALE control */
+ outw(ACON, nic->ioaddr + DEPCA_DATA);
+ outw(CSR0, nic->ioaddr + DEPCA_ADDR); /* Point back to CSR0 */
+}
+
+static inline int InitRestartDepca(struct nic *nic)
+{
+ int i;
+
+ /* Copy the shadow init_block to shared memory */
+ memcpy_toio((char *)lp.sh_mem, &lp.init_block, sizeof(struct depca_init));
+ outw(CSR0, nic->ioaddr + DEPCA_ADDR); /* point back to CSR0 */
+ outw(INIT, nic->ioaddr + DEPCA_DATA); /* initialise DEPCA */
+
+ for (i = 0; i < 100 && !(inw(nic->ioaddr + DEPCA_DATA) & IDON); i++)
+ ;
+ if (i < 100) {
+ /* clear IDON by writing a 1, and start LANCE */
+ outw(IDON | STRT, nic->ioaddr + DEPCA_DATA);
+ } else {
+ printf("DEPCA not initialised\n");
+ return (1);
+ }
+ return (0);
+}
+
+/**************************************************************************
+RESET - Reset adapter
+***************************************************************************/
+static void depca_reset(struct nic *nic)
+{
+ s16 nicsr;
+ int i, j;
+
+ STOP_DEPCA(nic->ioaddr);
+ nicsr = inb(nic->ioaddr + DEPCA_NICSR);
+ nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM);
+ outb(nicsr, nic->ioaddr + DEPCA_NICSR);
+ if (inw(nic->ioaddr + DEPCA_DATA) != STOP)
+ {
+ printf("depca: Cannot stop NIC\n");
+ return;
+ }
+
+ /* Initialisation block */
+ lp.sh_mem = mem_start;
+ mem_start += sizeof(struct depca_init);
+ /* Tx & Rx descriptors (aligned to a quadword boundary) */
+ mem_start = (mem_start + ALIGN) & ~ALIGN;
+ lp.rx_ring = (struct depca_rx_desc *) mem_start;
+ mem_start += (sizeof(struct depca_rx_desc) * NUM_RX_DESC);
+ lp.tx_ring = (struct depca_tx_desc *) mem_start;
+ mem_start += (sizeof(struct depca_tx_desc) * NUM_TX_DESC);
+
+ lp.bus_offset = mem_start & 0x00ff0000;
+ /* LANCE re-mapped start address */
+ lp.dma_buffs = mem_start & LA_MASK;
+
+ /* Finish initialising the ring information. */
+ lp.rxRingMask = NUM_RX_DESC - 1;
+ lp.txRingMask = NUM_TX_DESC - 1;
+
+ /* Calculate Tx/Rx RLEN size for the descriptors. */
+ for (i = 0, j = lp.rxRingMask; j > 0; i++) {
+ j >>= 1;
+ }
+ lp.rx_rlen = (s32) (i << 29);
+ for (i = 0, j = lp.txRingMask; j > 0; i++) {
+ j >>= 1;
+ }
+ lp.tx_rlen = (s32) (i << 29);
+
+ /* Load the initialisation block */
+ depca_init_ring(nic);
+ LoadCSRs(nic);
+ InitRestartDepca(nic);
+}
+
+/**************************************************************************
+POLL - Wait for a frame
+***************************************************************************/
+static int depca_poll(struct nic *nic, int retrieve)
+{
+ int entry;
+ u32 status;
+
+ entry = lp.rx_cur;
+ if ((status = readl(&lp.rx_ring[entry].base) & R_OWN))
+ return (0);
+
+ if ( ! retrieve ) return 1;
+
+ memcpy(nic->packet, lp.rx_memcpy[entry], nic->packetlen = lp.rx_ring[entry].msg_length);
+ lp.rx_ring[entry].base |= R_OWN;
+ lp.rx_cur = (++lp.rx_cur) & lp.rxRingMask;
+ return (1);
+}
+
+/**************************************************************************
+TRANSMIT - Transmit a frame
+***************************************************************************/
+static void depca_transmit(
+ struct nic *nic,
+ const char *d, /* Destination */
+ unsigned int t, /* Type */
+ unsigned int s, /* size */
+ const char *p) /* Packet */
+{
+ int entry, len;
+ char *mem;
+
+ /* send the packet to destination */
+ /*
+ ** Caution: the right order is important here... dont
+ ** setup the ownership rights until all the other
+ ** information is in place
+ */
+ mem = lp.tx_memcpy[entry = lp.tx_cur];
+ memcpy_toio(mem, d, ETH_ALEN);
+ memcpy_toio(mem + ETH_ALEN, nic->node_addr, ETH_ALEN);
+ mem[ETH_ALEN * 2] = t >> 8;
+ mem[ETH_ALEN * 2 + 1] = t;
+ memcpy_toio(mem + ETH_HLEN, p, s);
+ s += ETH_HLEN;
+ len = (s < ETH_ZLEN ? ETH_ZLEN : s);
+ /* clean out flags */
+ writel(readl(&lp.tx_ring[entry].base) & ~T_FLAGS, &lp.tx_ring[entry].base);
+ /* clears other error flags */
+ writew(0x0000, &lp.tx_ring[entry].misc);
+ /* packet length in buffer */
+ writew(-len, &lp.tx_ring[entry].length);
+ /* start and end of packet, ownership */
+ writel(readl(&lp.tx_ring[entry].base) | (T_STP|T_ENP|T_OWN), &lp.tx_ring[entry].base);
+ /* update current pointers */
+ lp.tx_cur = (++lp.tx_cur) & lp.txRingMask;
+}
+
+/**************************************************************************
+DISABLE - Turn off ethernet interface
+***************************************************************************/
+static void depca_disable ( struct nic *nic ) {
+ depca_reset(nic);
+
+ STOP_DEPCA(nic->ioaddr);
+}
+
+/**************************************************************************
+IRQ - Interrupt Control
+***************************************************************************/
+static void depca_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+ switch ( action ) {
+ case DISABLE :
+ break;
+ case ENABLE :
+ break;
+ case FORCE :
+ break;
+ }
+}
+
+/*
+** Look for a special sequence in the Ethernet station address PROM that
+** is common across all DEPCA products. Note that the original DEPCA needs
+** its ROM address counter to be initialized and enabled. Only enable
+** if the first address octet is a 0x08 - this minimises the chances of
+** messing around with some other hardware, but it assumes that this DEPCA
+** card initialized itself correctly.
+**
+** Search the Ethernet address ROM for the signature. Since the ROM address
+** counter can start at an arbitrary point, the search must include the entire
+** probe sequence length plus the (length_of_the_signature - 1).
+** Stop the search IMMEDIATELY after the signature is found so that the
+** PROM address counter is correctly positioned at the start of the
+** ethernet address for later read out.
+*/
+
+
+/*
+ * Ugly, ugly, ugly. I can't quite make out where the split should be
+ * between probe1 and probe()...
+ *
+ */
+static u8 nicsr;
+
+
+static int depca_probe1 ( isa_probe_addr_t ioaddr ) {
+ u8 data;
+ /* This is only correct for little endian machines, but then
+ Etherboot doesn't work on anything but a PC */
+ u8 sig[] = { 0xFF, 0x00, 0x55, 0xAA, 0xFF, 0x00, 0x55, 0xAA };
+ int i, j;
+
+ data = inb(ioaddr + DEPCA_PROM); /* clear counter on DEPCA */
+ data = inb(ioaddr + DEPCA_PROM); /* read data */
+ if (data == 0x8) {
+ nicsr = inb(ioaddr + DEPCA_NICSR);
+ nicsr |= AAC;
+ outb(nicsr, ioaddr + DEPCA_NICSR);
+ }
+ for (i = 0, j = 0; j < (int)sizeof(sig) && i < PROBE_LENGTH+((int)sizeof(sig))-1; ++i) {
+ data = inb(ioaddr + DEPCA_PROM);
+ if (data == sig[j]) /* track signature */
+ ++j;
+ else
+ j = (data == sig[0]) ? 1 : 0;
+ }
+ if (j != sizeof(sig))
+ return (0);
+ /* put the card in its initial state */
+ STOP_DEPCA(ioaddr);
+ nicsr = ((inb(ioaddr + DEPCA_NICSR) & ~SHE & ~RBE & ~IEN) | IM);
+ outb(nicsr, ioaddr + DEPCA_NICSR);
+ if (inw(ioaddr + DEPCA_DATA) != STOP)
+ return (0);
+ memcpy((char *)mem_start, sig, sizeof(sig));
+ if (memcmp((char *)mem_start, sig, sizeof(sig)) != 0)
+ return (0);
+
+ return 1;
+}
+
+static struct nic_operations depca_operations = {
+ .connect = dummy_connect,
+ .poll = depca_poll,
+ .transmit = depca_transmit,
+ .irq = depca_irq,
+
+};
+
+/**************************************************************************
+PROBE - Look for an adapter, this routine's visible to the outside
+***************************************************************************/
+static int depca_probe ( struct nic *nic, struct isa_device *isa ) {
+
+ int i, j;
+ long sum, chksum;
+
+ nic->irqno = 0;
+ nic->ioaddr = isa->ioaddr;
+
+ for (i = 0, j = 0, sum = 0; j < 3; j++) {
+ sum <<= 1;
+ if (sum > 0xFFFF)
+ sum -= 0xFFFF;
+ sum += (u8)(nic->node_addr[i++] = inb(nic->ioaddr + DEPCA_PROM));
+ sum += (u16)((nic->node_addr[i++] = inb(nic->ioaddr + DEPCA_PROM)) << 8);
+ if (sum > 0xFFFF)
+ sum -= 0xFFFF;
+ }
+ if (sum == 0xFFFF)
+ sum = 0;
+ chksum = (u8)inb(nic->ioaddr + DEPCA_PROM);
+ chksum |= (u16)(inb(nic->ioaddr + DEPCA_PROM) << 8);
+ mem_len = (adapter == DEPCA) ? (48 << 10) : (64 << 10);
+ offset = 0;
+ if (nicsr & BUF) {
+ offset = 0x8000;
+ nicsr &= ~BS;
+ mem_len -= (32 << 10);
+ }
+ if (adapter != DEPCA) /* enable shadow RAM */
+ outb(nicsr |= SHE, nic->ioaddr + DEPCA_NICSR);
+ DBG ( "%s base %4.4x, memory [%4.4lx-%4.4lx] addr %s",
+ adapter_name[adapter], nic->ioaddr, mem_start,
+ mem_start + mem_len, eth_ntoa ( nic->node_addr ) );
+ if (sum != chksum)
+ printf(" (bad checksum)");
+ putchar('\n');
+
+ depca_reset(nic);
+
+ /* point to NIC specific routines */
+ nic->nic_op = &depca_operations;
+ return 1;
+}
+
+static isa_probe_addr_t depca_probe_addrs[] = {
+ 0x300, 0x200,
+};
+
+ISA_DRIVER ( depca_driver, depca_probe_addrs, depca_probe1,
+ GENERIC_ISAPNP_VENDOR, 0x80f7 );
+
+DRIVER ( "depce", nic_driver, isa_driver, depca_driver,
+ depca_probe, depca_disable );
+
+ISA_ROM ( "depca", "Digital DE100 and DE200" );
+
+#endif
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * c-indent-level: 8
+ * tab-width: 8
+ * End:
+ */