Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 804 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/drivers/net/depca.c b/qemu/roms/ipxe/src/drivers/net/depca.c
new file mode 100644
index 000000000..016f28bb2
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/depca.c
@@ -0,0 +1,804 @@
+/* #warning "depca.c: FIXME: fix relocation" */
+
+FILE_LICENCE ( GPL_ANY );
+
+#if 0
+/* Not fixed for relocation yet. Probably won't work relocated above 16MB */
+#ifdef ALLMULTI
+#error multicast support is not yet implemented
+#endif
+/* Etherboot: depca.h merged, comments from Linux driver retained */
+/*  depca.c: A DIGITAL DEPCA  & EtherWORKS ethernet driver for linux.
+
+    Written 1994, 1995 by David C. Davies.
+
+
+                      Copyright 1994 David C. Davies
+		                   and 
+			 United States Government
+	 (as represented by the Director, National Security Agency).  
+
+               Copyright 1995  Digital Equipment Corporation.
+
+
+    This software may be used and distributed according to the terms of
+    the GNU Public License, incorporated herein by reference.
+
+    This driver is written for the Digital Equipment Corporation series
+    of DEPCA and EtherWORKS ethernet cards:
+
+        DEPCA       (the original)
+    	DE100
+    	DE101
+	DE200 Turbo
+	DE201 Turbo
+	DE202 Turbo (TP BNC)
+	DE210
+	DE422       (EISA)
+
+    The  driver has been tested on DE100, DE200 and DE202 cards  in  a
+    relatively busy network. The DE422 has been tested a little.
+
+    This  driver will NOT work   for the DE203,  DE204  and DE205 series  of
+    cards,  since they have  a  new custom ASIC in   place of the AMD  LANCE
+    chip.  See the 'ewrk3.c'   driver in the  Linux  source tree for running
+    those cards.
+
+    I have benchmarked the driver with a  DE100 at 595kB/s to (542kB/s from)
+    a DECstation 5000/200.
+
+    The author may be reached at davies@maniac.ultranet.com
+
+    =========================================================================
+
+    The  driver was originally based  on   the 'lance.c' driver from  Donald
+    Becker   which  is included with  the  standard  driver distribution for
+    linux.  V0.4  is  a complete  re-write  with only  the kernel  interface
+    remaining from the original code.
+
+    1) Lance.c code in /linux/drivers/net/
+    2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook",
+       AMD, 1992 [(800) 222-9323].
+    3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)",
+       AMD, Pub. #17881, May 1993.
+    4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA",
+       AMD, Pub. #16907, May 1992
+    5) "DEC EtherWORKS LC Ethernet Controller Owners Manual",
+       Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003
+    6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual",
+       Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003
+    7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR
+       Digital Equipment Corporation, 1989
+    8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual",
+       Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001
+    
+
+    Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this
+    driver.
+
+    The original DEPCA  card requires that the  ethernet ROM address counter
+    be enabled to count and has an 8 bit NICSR.  The ROM counter enabling is
+    only  done when a  0x08 is read as the  first address octet (to minimise
+    the chances  of writing over some  other hardware's  I/O register).  The
+    NICSR accesses   have been changed  to  byte accesses  for all the cards
+    supported by this driver, since there is only one  useful bit in the MSB
+    (remote boot timeout) and it  is not used.  Also, there  is a maximum of
+    only 48kB network  RAM for this  card.  My thanks  to Torbjorn Lindh for
+    help debugging all this (and holding my feet to  the fire until I got it
+    right).
+
+    The DE200  series  boards have  on-board 64kB  RAM for  use  as a shared
+    memory network  buffer. Only the DE100  cards make use  of a  2kB buffer
+    mode which has not  been implemented in  this driver (only the 32kB  and
+    64kB modes are supported [16kB/48kB for the original DEPCA]).
+
+    At the most only 2 DEPCA cards can  be supported on  the ISA bus because
+    there is only provision  for two I/O base addresses  on each card (0x300
+    and 0x200). The I/O address is detected by searching for a byte sequence
+    in the Ethernet station address PROM at the expected I/O address for the
+    Ethernet  PROM.   The shared memory  base   address  is 'autoprobed'  by
+    looking  for the self  test PROM  and detecting the  card name.   When a
+    second  DEPCA is  detected,  information  is   placed in the   base_addr
+    variable of the  next device structure (which  is created if necessary),
+    thus  enabling ethif_probe  initialization  for the device.  More than 2
+    EISA cards can  be  supported, but  care will  be  needed assigning  the
+    shared memory to ensure that each slot has the  correct IRQ, I/O address
+    and shared memory address assigned.
+
+    ************************************************************************
+
+    NOTE: If you are using two  ISA DEPCAs, it is  important that you assign
+    the base memory addresses correctly.   The  driver autoprobes I/O  0x300
+    then 0x200.  The  base memory address for  the first device must be less
+    than that of the second so that the auto probe will correctly assign the
+    I/O and memory addresses on the same card.  I can't think of a way to do
+    this unambiguously at the moment, since there is nothing on the cards to
+    tie I/O and memory information together.
+
+    I am unable  to  test  2 cards   together for now,    so this  code   is
+    unchecked. All reports, good or bad, are welcome.
+
+    ************************************************************************
+
+    The board IRQ   setting must be  at an  unused IRQ which  is auto-probed
+    using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are
+    {2,3,4,5,7}, whereas the  DE200 is at {5,9,10,11,15}.  Note that IRQ2 is
+    really IRQ9 in machines with 16 IRQ lines.
+
+    No 16MB memory  limitation should exist with this  driver as DMA is  not
+    used and the common memory area is in low memory on the network card (my
+    current system has 20MB and I've not had problems yet).
+
+    The ability to load this driver as a loadable module has been added. To
+    utilise this ability, you have to do <8 things:
+
+    0) have a copy of the loadable modules code installed on your system.
+    1) copy depca.c from the  /linux/drivers/net directory to your favourite
+    temporary directory.
+    2) if you wish, edit the  source code near  line 1530 to reflect the I/O
+    address and IRQ you're using (see also 5).
+    3) compile  depca.c, but include -DMODULE in  the command line to ensure
+    that the correct bits are compiled (see end of source code).
+    4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
+    kernel with the depca configuration turned off and reboot.
+    5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
+       [Alan Cox: Changed the code to allow command line irq/io assignments]
+       [Dave Davies: Changed the code to allow command line mem/name
+                                                                assignments]
+    6) run the net startup bits for your eth?? interface manually 
+    (usually /etc/rc.inet[12] at boot time). 
+    7) enjoy!
+
+    Note that autoprobing is not allowed in loadable modules - the system is
+    already up and running and you're messing with interrupts.
+
+    To unload a module, turn off the associated interface 
+    'ifconfig eth?? down' then 'rmmod depca'.
+
+    To assign a base memory address for the shared memory  when running as a
+    loadable module, see 5 above.  To include the adapter  name (if you have
+    no PROM  but know the card name)  also see 5  above. Note that this last
+    option  will not work  with kernel  built-in  depca's. 
+
+    The shared memory assignment for a loadable module  makes sense to avoid
+    the 'memory autoprobe' picking the wrong shared memory  (for the case of
+    2 depca's in a PC).
+
+    ************************************************************************
+    Support for MCA EtherWORKS cards added 11-3-98.
+    Verified to work with up to 2 DE212 cards in a system (although not
+      fully stress-tested).  
+
+    Currently known bugs/limitations:
+
+    Note:  with the MCA stuff as a module, it trusts the MCA configuration,
+           not the command line for IRQ and memory address.  You can
+           specify them if you want, but it will throw your values out.
+           You still have to pass the IO address it was configured as
+           though.
+
+    ************************************************************************
+    TO DO:
+    ------
+
+
+    Revision History
+    ----------------
+
+    Version   Date        Description
+  
+      0.1     25-jan-94   Initial writing.
+      0.2     27-jan-94   Added LANCE TX hardware buffer chaining.
+      0.3      1-feb-94   Added multiple DEPCA support.
+      0.31     4-feb-94   Added DE202 recognition.
+      0.32    19-feb-94   Tidy up. Improve multi-DEPCA support.
+      0.33    25-feb-94   Fix DEPCA ethernet ROM counter enable.
+                          Add jabber packet fix from murf@perftech.com
+			  and becker@super.org
+      0.34     7-mar-94   Fix DEPCA max network memory RAM & NICSR access.
+      0.35     8-mar-94   Added DE201 recognition. Tidied up.
+      0.351   30-apr-94   Added EISA support. Added DE422 recognition.
+      0.36    16-may-94   DE422 fix released.
+      0.37    22-jul-94   Added MODULE support
+      0.38    15-aug-94   Added DBR ROM switch in depca_close(). 
+                          Multi DEPCA bug fix.
+      0.38axp 15-sep-94   Special version for Alpha AXP Linux V1.0.
+      0.381   12-dec-94   Added DE101 recognition, fix multicast bug.
+      0.382    9-feb-95   Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+      0.383   22-feb-95   Fix for conflict with VESA SCSI reported by
+                          <stromain@alf.dec.com>
+      0.384   17-mar-95   Fix a ring full bug reported by <bkm@star.rl.ac.uk>
+      0.385    3-apr-95   Fix a recognition bug reported by 
+                                                <ryan.niemi@lastfrontier.com>
+      0.386   21-apr-95   Fix the last fix...sorry, must be galloping senility
+      0.40    25-May-95   Rewrite for portability & updated.
+                          ALPHA support from <jestabro@amt.tay1.dec.com>
+      0.41    26-Jun-95   Added verify_area() calls in depca_ioctl() from
+                          suggestion by <heiko@colossus.escape.de>
+      0.42    27-Dec-95   Add 'mem' shared memory assignment for loadable 
+                          modules.
+                          Add 'adapter_name' for loadable modules when no PROM.
+			  Both above from a suggestion by 
+			  <pchen@woodruffs121.residence.gatech.edu>.
+			  Add new multicasting code.
+      0.421   22-Apr-96	  Fix alloc_device() bug <jari@markkus2.fimr.fi>
+      0.422   29-Apr-96	  Fix depca_hw_init() bug <jari@markkus2.fimr.fi>
+      0.423    7-Jun-96   Fix module load bug <kmg@barco.be>
+      0.43    16-Aug-96   Update alloc_device() to conform to de4x5.c
+      0.44     1-Sep-97   Fix *_probe() to test check_region() first - bug
+                           reported by <mmogilvi@elbert.uccs.edu>
+      0.45     3-Nov-98   Added support for MCA EtherWORKS (DE210/DE212) cards
+                           by <tymm@computer.org> 
+      0.451    5-Nov-98   Fixed mca stuff cuz I'm a dummy. <tymm@computer.org>
+      0.5     14-Nov-98   Re-spin for 2.1.x kernels.
+      0.51    27-Jun-99   Correct received packet length for CRC from
+                           report by <worm@dkik.dk>
+
+    =========================================================================
+*/
+
+#include "etherboot.h"
+#include "nic.h"
+#include <ipxe/isa.h>
+#include <ipxe/ethernet.h>
+
+/*
+** I/O addresses. Note that the 2k buffer option is not supported in
+** this driver.
+*/
+#define DEPCA_NICSR 0x00   /* Network interface CSR */
+#define DEPCA_RBI   0x02   /* RAM buffer index (2k buffer mode) */
+#define DEPCA_DATA  0x04   /* LANCE registers' data port */
+#define DEPCA_ADDR  0x06   /* LANCE registers' address port */
+#define DEPCA_HBASE 0x08   /* EISA high memory base address reg. */
+#define DEPCA_PROM  0x0c   /* Ethernet address ROM data port */
+#define DEPCA_CNFG  0x0c   /* EISA Configuration port */
+#define DEPCA_RBSA  0x0e   /* RAM buffer starting address (2k buff.) */
+
+/*
+** These are LANCE registers addressable through nic->ioaddr + DEPCA_ADDR 
+*/
+#define CSR0       0
+#define CSR1       1
+#define CSR2       2
+#define CSR3       3
+
+/* 
+** NETWORK INTERFACE CSR (NI_CSR) bit definitions 
+*/
+ 
+#define TO       	0x0100	/* Time Out for remote boot */
+#define SHE      	0x0080  /* SHadow memory Enable */
+#define BS       	0x0040  /* Bank Select */
+#define BUF      	0x0020	/* BUFfer size (1->32k, 0->64k) */
+#define RBE      	0x0010	/* Remote Boot Enable (1->net boot) */
+#define AAC      	0x0008  /* Address ROM Address Counter (1->enable) */
+#define _128KB      	0x0008  /* 128kB Network RAM (1->enable) */
+#define IM       	0x0004	/* Interrupt Mask (1->mask) */
+#define IEN      	0x0002	/* Interrupt tristate ENable (1->enable) */
+#define LED      	0x0001	/* LED control */
+
+/* 
+** Control and Status Register 0 (CSR0) bit definitions 
+*/
+
+#define ERR     	0x8000 	/* Error summary */
+#define BABL    	0x4000 	/* Babble transmitter timeout error  */
+#define CERR    	0x2000 	/* Collision Error */
+#define MISS    	0x1000 	/* Missed packet */
+#define MERR    	0x0800 	/* Memory Error */
+#define RINT    	0x0400 	/* Receiver Interrupt */
+#define TINT    	0x0200 	/* Transmit Interrupt */
+#define IDON    	0x0100 	/* Initialization Done */
+#define INTR    	0x0080 	/* Interrupt Flag */
+#define INEA    	0x0040 	/* Interrupt Enable */
+#define RXON    	0x0020 	/* Receiver on */
+#define TXON    	0x0010 	/* Transmitter on */
+#define TDMD    	0x0008 	/* Transmit Demand */
+#define STOP    	0x0004 	/* Stop */
+#define STRT    	0x0002 	/* Start */
+#define INIT    	0x0001 	/* Initialize */
+#define INTM            0xff00  /* Interrupt Mask */
+#define INTE            0xfff0  /* Interrupt Enable */
+
+/*
+** CONTROL AND STATUS REGISTER 3 (CSR3)
+*/
+
+#define BSWP    	0x0004	/* Byte SWaP */
+#define ACON    	0x0002	/* ALE control */
+#define BCON    	0x0001	/* Byte CONtrol */
+
+/*
+** Initialization Block Mode Register 
+*/
+
+#define PROM       	0x8000 	/* Promiscuous Mode */
+#define EMBA       	0x0080	/* Enable Modified Back-off Algorithm */
+#define INTL       	0x0040 	/* Internal Loopback */
+#define DRTY       	0x0020 	/* Disable Retry */
+#define COLL       	0x0010 	/* Force Collision */
+#define DTCR       	0x0008 	/* Disable Transmit CRC */
+#define LOOP       	0x0004 	/* Loopback */
+#define DTX        	0x0002 	/* Disable the Transmitter */
+#define DRX        	0x0001 	/* Disable the Receiver */
+
+/*
+** Receive Message Descriptor 1 (RMD1) bit definitions. 
+*/
+
+#define R_OWN       0x80000000 	/* Owner bit 0 = host, 1 = lance */
+#define R_ERR     	0x4000 	/* Error Summary */
+#define R_FRAM    	0x2000 	/* Framing Error */
+#define R_OFLO    	0x1000 	/* Overflow Error */
+#define R_CRC     	0x0800 	/* CRC Error */
+#define R_BUFF    	0x0400 	/* Buffer Error */
+#define R_STP     	0x0200 	/* Start of Packet */
+#define R_ENP     	0x0100 	/* End of Packet */
+
+/*
+** Transmit Message Descriptor 1 (TMD1) bit definitions. 
+*/
+
+#define T_OWN       0x80000000 	/* Owner bit 0 = host, 1 = lance */
+#define T_ERR     	0x4000 	/* Error Summary */
+#define T_ADD_FCS 	0x2000 	/* More the 1 retry needed to Xmit */
+#define T_MORE    	0x1000	/* >1 retry to transmit packet */
+#define T_ONE     	0x0800 	/* 1 try needed to transmit the packet */
+#define T_DEF     	0x0400 	/* Deferred */
+#define T_STP       0x02000000 	/* Start of Packet */
+#define T_ENP       0x01000000	/* End of Packet */
+#define T_FLAGS     0xff000000  /* TX Flags Field */
+
+/*
+** Transmit Message Descriptor 3 (TMD3) bit definitions.
+*/
+
+#define TMD3_BUFF    0x8000	/* BUFFer error */
+#define TMD3_UFLO    0x4000	/* UnderFLOw error */
+#define TMD3_RES     0x2000	/* REServed */
+#define TMD3_LCOL    0x1000	/* Late COLlision */
+#define TMD3_LCAR    0x0800	/* Loss of CARrier */
+#define TMD3_RTRY    0x0400	/* ReTRY error */
+
+/*
+** Ethernet PROM defines
+*/
+#define PROBE_LENGTH    32
+
+/*
+** Set the number of Tx and Rx buffers. Ensure that the memory requested
+** here is <= to the amount of shared memory set up by the board switches.
+** The number of descriptors MUST BE A POWER OF 2.
+**
+** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ)
+*/
+#define NUM_RX_DESC     2               /* Number of RX descriptors */
+#define NUM_TX_DESC     2               /* Number of TX descriptors */
+#define RX_BUFF_SZ	1536            /* Buffer size for each Rx buffer */
+#define TX_BUFF_SZ	1536            /* Buffer size for each Tx buffer */
+
+/*
+** ISA Bus defines
+*/
+#ifndef	DEPCA_MODEL
+#define	DEPCA_MODEL	DEPCA
+#endif
+
+static enum {
+	DEPCA, DE100, DE101, DE200, DE201, DE202, DE210, DE212, DE422, unknown
+} adapter = DEPCA_MODEL;
+
+/*
+** Name <-> Adapter mapping
+*/
+
+static char *adapter_name[] = {
+	"DEPCA",
+	"DE100","DE101",
+	"DE200","DE201","DE202",
+	"DE210","DE212",
+	"DE422",
+	""
+};
+
+#ifndef	DEPCA_RAM_BASE
+#define DEPCA_RAM_BASE	0xd0000
+#endif
+
+/*
+** Memory Alignment. Each descriptor is 4 longwords long. To force a
+** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
+** DESC_ALIGN. ALIGN aligns the start address of the private memory area
+** and hence the RX descriptor ring's first entry. 
+*/
+#define ALIGN4      ((u32)4 - 1)       /* 1 longword align */
+#define ALIGN8      ((u32)8 - 1)       /* 2 longword (quadword) align */
+#define ALIGN         ALIGN8              /* Keep the LANCE happy... */
+
+/*
+** The DEPCA Rx and Tx ring descriptors. 
+*/
+struct depca_rx_desc {
+    volatile s32 base;
+    s16 buf_length;		/* This length is negative 2's complement! */
+    s16 msg_length;		/* This length is "normal". */
+};
+
+struct depca_tx_desc {
+    volatile s32 base;
+    s16 length;		        /* This length is negative 2's complement! */
+    s16 misc;                   /* Errors and TDR info */
+};
+
+#define LA_MASK 0x0000ffff      /* LANCE address mask for mapping network RAM
+				   to LANCE memory address space */
+
+/*
+** The Lance initialization block, described in databook, in common memory.
+*/
+struct depca_init {
+    u16 mode;	                /* Mode register */
+    u8  phys_addr[ETH_ALEN];	/* Physical ethernet address */
+    u8  mcast_table[8];	        /* Multicast Hash Table. */
+    u32 rx_ring;     	        /* Rx ring base pointer & ring length */
+    u32 tx_ring;	        /* Tx ring base pointer & ring length */
+};
+
+struct depca_private {
+	struct depca_rx_desc	*rx_ring;
+	struct depca_tx_desc	*tx_ring;
+	struct depca_init	init_block;	/* Shadow init block */
+	char			*rx_memcpy[NUM_RX_DESC];
+	char			*tx_memcpy[NUM_TX_DESC];
+	u32			bus_offset;	/* ISA bus address offset */
+	u32			sh_mem;		/* address of shared mem */
+	u32			dma_buffs;	/* Rx & Tx buffer start */
+	int			rx_cur, tx_cur;	/* Next free ring entry */
+	int			txRingMask, rxRingMask;
+	s32			rx_rlen, tx_rlen;
+	/* log2([rt]xRingMask+1) for the descriptors */
+};
+
+static Address		mem_start = DEPCA_RAM_BASE;
+static Address		mem_len, offset;
+static struct depca_private	lp;
+
+/*
+** Miscellaneous defines...
+*/
+#define STOP_DEPCA(ioaddr) \
+    outw(CSR0, ioaddr + DEPCA_ADDR);\
+    outw(STOP, ioaddr + DEPCA_DATA)
+
+/* Initialize the lance Rx and Tx descriptor rings. */
+static void depca_init_ring(struct nic *nic)
+{
+	int	i;
+	u32	p;
+
+	lp.rx_cur = lp.tx_cur = 0;
+	/* Initialize the base addresses and length of each buffer in the ring */
+	for (i = 0; i <= lp.rxRingMask; i++) {
+		writel((p = lp.dma_buffs + i * RX_BUFF_SZ) | R_OWN, &lp.rx_ring[i].base);
+		writew(-RX_BUFF_SZ, &lp.rx_ring[i].buf_length);
+		lp.rx_memcpy[i] = (char *) (p + lp.bus_offset);
+	}
+	for (i = 0; i <= lp.txRingMask; i++) {
+		writel((p = lp.dma_buffs + (i + lp.txRingMask + 1) * TX_BUFF_SZ) & 0x00ffffff, &lp.tx_ring[i].base);
+		lp.tx_memcpy[i] = (char *) (p + lp.bus_offset);
+	}
+
+	/* Set up the initialization block */
+	lp.init_block.rx_ring = ((u32) ((u32) lp.rx_ring) & LA_MASK) | lp.rx_rlen;
+	lp.init_block.tx_ring = ((u32) ((u32) lp.tx_ring) & LA_MASK) | lp.tx_rlen;
+	for (i = 0; i < ETH_ALEN; i++)
+		lp.init_block.phys_addr[i] = nic->node_addr[i];
+	lp.init_block.mode = 0x0000;	/* Enable the Tx and Rx */
+	memset(lp.init_block.mcast_table, 0, sizeof(lp.init_block.mcast_table));
+}
+
+static inline void LoadCSRs(struct nic *nic)
+{
+	outw(CSR1, nic->ioaddr + DEPCA_ADDR);	/* initialisation block address LSW */
+	outw((u16) (lp.sh_mem & LA_MASK), nic->ioaddr + DEPCA_DATA);
+	outw(CSR2, nic->ioaddr + DEPCA_ADDR);	/* initialisation block address MSW */
+	outw((u16) ((lp.sh_mem & LA_MASK) >> 16), nic->ioaddr + DEPCA_DATA);
+	outw(CSR3, nic->ioaddr + DEPCA_ADDR);	/* ALE control */
+	outw(ACON, nic->ioaddr + DEPCA_DATA);
+	outw(CSR0, nic->ioaddr + DEPCA_ADDR);	/* Point back to CSR0 */
+}
+
+static inline int InitRestartDepca(struct nic *nic)
+{
+	int		i;
+
+	/* Copy the shadow init_block to shared memory */
+	memcpy_toio((char *)lp.sh_mem, &lp.init_block, sizeof(struct depca_init));
+	outw(CSR0, nic->ioaddr + DEPCA_ADDR);		/* point back to CSR0 */
+	outw(INIT, nic->ioaddr + DEPCA_DATA);		/* initialise DEPCA */
+
+	for (i = 0; i < 100 && !(inw(nic->ioaddr + DEPCA_DATA) & IDON); i++)
+		;
+	if (i < 100) {
+		/* clear IDON by writing a 1, and start LANCE */
+		outw(IDON | STRT, nic->ioaddr + DEPCA_DATA);
+	} else {
+		printf("DEPCA not initialised\n");
+		return (1);
+	}
+	return (0);
+}
+
+/**************************************************************************
+RESET - Reset adapter
+***************************************************************************/
+static void depca_reset(struct nic *nic)
+{
+	s16	nicsr;
+	int	i, j;
+
+	STOP_DEPCA(nic->ioaddr);
+	nicsr = inb(nic->ioaddr + DEPCA_NICSR);
+	nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM);
+	outb(nicsr, nic->ioaddr + DEPCA_NICSR);
+	if (inw(nic->ioaddr + DEPCA_DATA) != STOP)
+	{
+		printf("depca: Cannot stop NIC\n");
+		return;
+	}
+
+	/* Initialisation block */
+	lp.sh_mem = mem_start;
+	mem_start += sizeof(struct depca_init);
+	/* Tx & Rx descriptors (aligned to a quadword boundary) */
+	mem_start = (mem_start + ALIGN) & ~ALIGN;
+	lp.rx_ring = (struct depca_rx_desc *) mem_start;
+	mem_start += (sizeof(struct depca_rx_desc) * NUM_RX_DESC);
+	lp.tx_ring = (struct depca_tx_desc *) mem_start;
+	mem_start += (sizeof(struct depca_tx_desc) * NUM_TX_DESC);
+
+	lp.bus_offset = mem_start & 0x00ff0000;
+	/* LANCE re-mapped start address */
+	lp.dma_buffs = mem_start & LA_MASK;
+
+	/* Finish initialising the ring information. */
+	lp.rxRingMask = NUM_RX_DESC - 1;
+	lp.txRingMask = NUM_TX_DESC - 1;
+
+	/* Calculate Tx/Rx RLEN size for the descriptors. */
+	for (i = 0, j = lp.rxRingMask; j > 0; i++) {
+		j >>= 1;
+	}
+	lp.rx_rlen = (s32) (i << 29);
+	for (i = 0, j = lp.txRingMask; j > 0; i++) {
+		j >>= 1;
+	}
+	lp.tx_rlen = (s32) (i << 29);
+
+	/* Load the initialisation block */
+	depca_init_ring(nic);
+	LoadCSRs(nic);
+	InitRestartDepca(nic);
+}
+
+/**************************************************************************
+POLL - Wait for a frame
+***************************************************************************/
+static int depca_poll(struct nic *nic, int retrieve)
+{
+	int		entry;
+	u32		status;
+
+	entry = lp.rx_cur;
+	if ((status = readl(&lp.rx_ring[entry].base) & R_OWN))
+		return (0);
+
+	if ( ! retrieve ) return 1;
+
+	memcpy(nic->packet, lp.rx_memcpy[entry], nic->packetlen = lp.rx_ring[entry].msg_length);
+	lp.rx_ring[entry].base |= R_OWN;
+	lp.rx_cur = (++lp.rx_cur) & lp.rxRingMask;
+	return (1);
+}
+
+/**************************************************************************
+TRANSMIT - Transmit a frame
+***************************************************************************/
+static void depca_transmit(
+	struct nic *nic,
+	const char *d,			/* Destination */
+	unsigned int t,			/* Type */
+	unsigned int s,			/* size */
+	const char *p)			/* Packet */
+{
+	int		entry, len;
+	char		*mem;
+
+	/* send the packet to destination */
+	/*
+	** Caution: the right order is important here... dont
+	** setup the ownership rights until all the other
+	** information is in place
+	*/
+	mem = lp.tx_memcpy[entry = lp.tx_cur];
+	memcpy_toio(mem, d, ETH_ALEN);
+	memcpy_toio(mem + ETH_ALEN, nic->node_addr, ETH_ALEN);
+	mem[ETH_ALEN * 2] = t >> 8;
+	mem[ETH_ALEN * 2 + 1] = t;
+	memcpy_toio(mem + ETH_HLEN, p, s);
+	s += ETH_HLEN;
+	len = (s < ETH_ZLEN ? ETH_ZLEN : s);
+	/* clean out flags */
+	writel(readl(&lp.tx_ring[entry].base) & ~T_FLAGS, &lp.tx_ring[entry].base);
+	/* clears other error flags */
+	writew(0x0000, &lp.tx_ring[entry].misc);
+	/* packet length in buffer */
+	writew(-len, &lp.tx_ring[entry].length);
+	/* start and end of packet, ownership */
+	writel(readl(&lp.tx_ring[entry].base) | (T_STP|T_ENP|T_OWN), &lp.tx_ring[entry].base);
+	/* update current pointers */
+	lp.tx_cur = (++lp.tx_cur) & lp.txRingMask;
+}
+
+/**************************************************************************
+DISABLE - Turn off ethernet interface
+***************************************************************************/
+static void depca_disable ( struct nic *nic ) {
+	depca_reset(nic);
+
+	STOP_DEPCA(nic->ioaddr);
+}
+
+/**************************************************************************
+IRQ - Interrupt Control
+***************************************************************************/
+static void depca_irq(struct nic *nic __unused, irq_action_t action __unused)
+{
+  switch ( action ) {
+  case DISABLE :
+    break;
+  case ENABLE :
+    break;
+  case FORCE :
+    break;
+  }
+}
+
+/*
+** Look for a special sequence in the Ethernet station address PROM that
+** is common across all DEPCA products. Note that the original DEPCA needs
+** its ROM address counter to be initialized and enabled. Only enable
+** if the first address octet is a 0x08 - this minimises the chances of
+** messing around with some other hardware, but it assumes that this DEPCA
+** card initialized itself correctly.
+**
+** Search the Ethernet address ROM for the signature. Since the ROM address
+** counter can start at an arbitrary point, the search must include the entire
+** probe sequence length plus the (length_of_the_signature - 1).
+** Stop the search IMMEDIATELY after the signature is found so that the
+** PROM address counter is correctly positioned at the start of the
+** ethernet address for later read out.
+*/
+
+
+/*
+ * Ugly, ugly, ugly.  I can't quite make out where the split should be
+ * between probe1 and probe()...
+ *
+ */
+static u8 nicsr;
+
+
+static int depca_probe1 ( isa_probe_addr_t ioaddr ) {
+	u8	data;
+	/* This is only correct for little endian machines, but then
+	   Etherboot doesn't work on anything but a PC */
+	u8	sig[] = { 0xFF, 0x00, 0x55, 0xAA, 0xFF, 0x00, 0x55, 0xAA };
+	int	i, j;
+
+	data = inb(ioaddr + DEPCA_PROM);		/* clear counter on DEPCA */
+	data = inb(ioaddr + DEPCA_PROM);		/* read data */
+	if (data == 0x8) {
+		nicsr = inb(ioaddr + DEPCA_NICSR);
+		nicsr |= AAC;
+		outb(nicsr, ioaddr + DEPCA_NICSR);
+	}
+	for (i = 0, j = 0; j < (int)sizeof(sig) && i < PROBE_LENGTH+((int)sizeof(sig))-1; ++i) {
+		data = inb(ioaddr + DEPCA_PROM);
+		if (data == sig[j])		/* track signature */
+			++j;
+		else
+			j = (data == sig[0]) ? 1 : 0;
+	}
+	if (j != sizeof(sig))
+		return (0);
+	/* put the card in its initial state */
+	STOP_DEPCA(ioaddr);
+	nicsr = ((inb(ioaddr + DEPCA_NICSR) & ~SHE & ~RBE & ~IEN) | IM);
+	outb(nicsr, ioaddr + DEPCA_NICSR);
+	if (inw(ioaddr + DEPCA_DATA) != STOP)
+		return (0);
+	memcpy((char *)mem_start, sig, sizeof(sig));
+	if (memcmp((char *)mem_start, sig, sizeof(sig)) != 0)
+		return (0);
+
+	return 1;
+}
+
+static struct nic_operations depca_operations = {
+	.connect	= dummy_connect,
+	.poll		= depca_poll,
+	.transmit	= depca_transmit,
+	.irq		= depca_irq,
+
+};
+
+/**************************************************************************
+PROBE - Look for an adapter, this routine's visible to the outside
+***************************************************************************/
+static int depca_probe ( struct nic *nic, struct isa_device *isa ) {
+
+	int	i, j;
+	long	sum, chksum;
+
+	nic->irqno    = 0;
+	nic->ioaddr   = isa->ioaddr;
+
+	for (i = 0, j = 0, sum = 0; j < 3; j++) {
+		sum <<= 1;
+		if (sum > 0xFFFF)
+			sum -= 0xFFFF;
+		sum += (u8)(nic->node_addr[i++] = inb(nic->ioaddr + DEPCA_PROM));
+		sum += (u16)((nic->node_addr[i++] = inb(nic->ioaddr + DEPCA_PROM)) << 8);
+		if (sum > 0xFFFF)
+			sum -= 0xFFFF;
+	}
+	if (sum == 0xFFFF)
+		sum = 0;
+	chksum = (u8)inb(nic->ioaddr + DEPCA_PROM);
+	chksum |= (u16)(inb(nic->ioaddr + DEPCA_PROM) << 8);
+	mem_len = (adapter == DEPCA) ? (48 << 10) : (64 << 10);
+	offset = 0;
+	if (nicsr & BUF) {
+		offset = 0x8000;
+		nicsr &= ~BS;
+		mem_len -= (32 << 10);
+	}
+	if (adapter != DEPCA)	/* enable shadow RAM */
+		outb(nicsr |= SHE, nic->ioaddr + DEPCA_NICSR);
+	DBG ( "%s base %4.4x, memory [%4.4lx-%4.4lx] addr %s",
+	       adapter_name[adapter], nic->ioaddr, mem_start,
+	       mem_start + mem_len, eth_ntoa ( nic->node_addr ) );
+	if (sum != chksum)
+		printf(" (bad checksum)");
+	putchar('\n');
+
+	depca_reset(nic);
+
+	/* point to NIC specific routines */
+	nic->nic_op	= &depca_operations;
+	return 1;
+}
+
+static isa_probe_addr_t depca_probe_addrs[] = {
+	0x300, 0x200,
+};
+
+ISA_DRIVER ( depca_driver, depca_probe_addrs, depca_probe1,
+		     GENERIC_ISAPNP_VENDOR, 0x80f7 );
+
+DRIVER ( "depce", nic_driver, isa_driver, depca_driver,
+	 depca_probe, depca_disable );
+
+ISA_ROM ( "depca", "Digital DE100 and DE200" );
+
+#endif
+
+/*
+ * Local variables:
+ *  c-basic-offset: 8
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ */