diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/ipxe/src/drivers/net/ath/ath5k | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/ipxe/src/drivers/net/ath/ath5k')
20 files changed, 18088 insertions, 0 deletions
diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c new file mode 100644 index 000000000..92c4ffdf4 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.c @@ -0,0 +1,1698 @@ +/* + * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications, Inc. + * Copyright (c) 2006 Devicescape Software, Inc. + * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net> + * Original from Linux kernel 2.6.30. + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +FILE_LICENCE ( BSD3 ); + +#include <stdlib.h> +#include <ipxe/malloc.h> +#include <ipxe/timer.h> +#include <ipxe/netdevice.h> +#include <ipxe/pci.h> +#include <ipxe/pci_io.h> + +#include "base.h" +#include "reg.h" + +#define ATH5K_CALIB_INTERVAL 10 /* Calibrate PHY every 10 seconds */ +#define ATH5K_RETRIES 4 /* Number of times to retry packet sends */ +#define ATH5K_DESC_ALIGN 16 /* Alignment for TX/RX descriptors */ + +/******************\ +* Internal defines * +\******************/ + +/* Known PCI ids */ +static struct pci_device_id ath5k_nics[] = { + PCI_ROM(0x168c, 0x0207, "ath5210e", "Atheros 5210 early", AR5K_AR5210), + PCI_ROM(0x168c, 0x0007, "ath5210", "Atheros 5210", AR5K_AR5210), + PCI_ROM(0x168c, 0x0011, "ath5311", "Atheros 5311 (AHB)", AR5K_AR5211), + PCI_ROM(0x168c, 0x0012, "ath5211", "Atheros 5211", AR5K_AR5211), + PCI_ROM(0x168c, 0x0013, "ath5212", "Atheros 5212", AR5K_AR5212), + PCI_ROM(0xa727, 0x0013, "ath5212c","3com Ath 5212", AR5K_AR5212), + PCI_ROM(0x10b7, 0x0013, "rdag675", "3com 3CRDAG675", AR5K_AR5212), + PCI_ROM(0x168c, 0x1014, "ath5212m", "Ath 5212 miniPCI", AR5K_AR5212), + PCI_ROM(0x168c, 0x0014, "ath5212x14", "Atheros 5212 x14", AR5K_AR5212), + PCI_ROM(0x168c, 0x0015, "ath5212x15", "Atheros 5212 x15", AR5K_AR5212), + PCI_ROM(0x168c, 0x0016, "ath5212x16", "Atheros 5212 x16", AR5K_AR5212), + PCI_ROM(0x168c, 0x0017, "ath5212x17", "Atheros 5212 x17", AR5K_AR5212), + PCI_ROM(0x168c, 0x0018, "ath5212x18", "Atheros 5212 x18", AR5K_AR5212), + PCI_ROM(0x168c, 0x0019, "ath5212x19", "Atheros 5212 x19", AR5K_AR5212), + PCI_ROM(0x168c, 0x001a, "ath2413", "Atheros 2413 Griffin", AR5K_AR5212), + PCI_ROM(0x168c, 0x001b, "ath5413", "Atheros 5413 Eagle", AR5K_AR5212), + PCI_ROM(0x168c, 0x001c, "ath5212e", "Atheros 5212 PCI-E", AR5K_AR5212), + PCI_ROM(0x168c, 0x001d, "ath2417", "Atheros 2417 Nala", AR5K_AR5212), +}; + +/* Known SREVs */ +static const struct ath5k_srev_name srev_names[] = { + { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 }, + { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 }, + { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A }, + { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B }, + { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 }, + { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 }, + { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 }, + { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A }, + { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 }, + { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 }, + { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 }, + { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 }, + { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 }, + { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 }, + { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 }, + { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 }, + { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 }, + { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 }, + { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN }, + { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 }, + { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 }, + { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A }, + { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 }, + { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 }, + { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A }, + { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B }, + { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 }, + { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A }, + { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B }, + { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 }, + { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 }, + { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 }, + { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 }, + { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 }, + { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 }, + { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, +}; + +#define ATH5K_SPMBL_NO 1 +#define ATH5K_SPMBL_YES 2 +#define ATH5K_SPMBL_BOTH 3 + +static const struct { + u16 bitrate; + u8 short_pmbl; + u8 hw_code; +} ath5k_rates[] = { + { 10, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_1M }, + { 20, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_2M }, + { 55, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_5_5M }, + { 110, ATH5K_SPMBL_NO, ATH5K_RATE_CODE_11M }, + { 60, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_6M }, + { 90, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_9M }, + { 120, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_12M }, + { 180, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_18M }, + { 240, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_24M }, + { 360, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_36M }, + { 480, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_48M }, + { 540, ATH5K_SPMBL_BOTH, ATH5K_RATE_CODE_54M }, + { 20, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE }, + { 55, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE }, + { 110, ATH5K_SPMBL_YES, ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE }, + { 0, 0, 0 }, +}; + +#define ATH5K_NR_RATES 15 + +/* + * Prototypes - PCI stack related functions + */ +static int ath5k_probe(struct pci_device *pdev); +static void ath5k_remove(struct pci_device *pdev); + +struct pci_driver ath5k_pci_driver __pci_driver = { + .ids = ath5k_nics, + .id_count = sizeof(ath5k_nics) / sizeof(ath5k_nics[0]), + .probe = ath5k_probe, + .remove = ath5k_remove, +}; + + + +/* + * Prototypes - MAC 802.11 stack related functions + */ +static int ath5k_tx(struct net80211_device *dev, struct io_buffer *skb); +static int ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan); +static int ath5k_reset_wake(struct ath5k_softc *sc); +static int ath5k_start(struct net80211_device *dev); +static void ath5k_stop(struct net80211_device *dev); +static int ath5k_config(struct net80211_device *dev, int changed); +static void ath5k_poll(struct net80211_device *dev); +static void ath5k_irq(struct net80211_device *dev, int enable); + +static struct net80211_device_operations ath5k_ops = { + .open = ath5k_start, + .close = ath5k_stop, + .transmit = ath5k_tx, + .poll = ath5k_poll, + .irq = ath5k_irq, + .config = ath5k_config, +}; + +/* + * Prototypes - Internal functions + */ +/* Attach detach */ +static int ath5k_attach(struct net80211_device *dev); +static void ath5k_detach(struct net80211_device *dev); +/* Channel/mode setup */ +static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, + struct net80211_channel *channels, + unsigned int mode, + unsigned int max); +static int ath5k_setup_bands(struct net80211_device *dev); +static int ath5k_chan_set(struct ath5k_softc *sc, + struct net80211_channel *chan); +static void ath5k_setcurmode(struct ath5k_softc *sc, + unsigned int mode); +static void ath5k_mode_setup(struct ath5k_softc *sc); + +/* Descriptor setup */ +static int ath5k_desc_alloc(struct ath5k_softc *sc); +static void ath5k_desc_free(struct ath5k_softc *sc); +/* Buffers setup */ +static int ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf); +static int ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf); + +static inline void ath5k_txbuf_free(struct ath5k_softc *sc, + struct ath5k_buf *bf) +{ + if (!bf->iob) + return; + + net80211_tx_complete(sc->dev, bf->iob, 0, ECANCELED); + bf->iob = NULL; +} + +static inline void ath5k_rxbuf_free(struct ath5k_softc *sc __unused, + struct ath5k_buf *bf) +{ + free_iob(bf->iob); + bf->iob = NULL; +} + +/* Queues setup */ +static int ath5k_txq_setup(struct ath5k_softc *sc, + int qtype, int subtype); +static void ath5k_txq_drainq(struct ath5k_softc *sc, + struct ath5k_txq *txq); +static void ath5k_txq_cleanup(struct ath5k_softc *sc); +static void ath5k_txq_release(struct ath5k_softc *sc); +/* Rx handling */ +static int ath5k_rx_start(struct ath5k_softc *sc); +static void ath5k_rx_stop(struct ath5k_softc *sc); +/* Tx handling */ +static void ath5k_tx_processq(struct ath5k_softc *sc, + struct ath5k_txq *txq); + +/* Interrupt handling */ +static int ath5k_init(struct ath5k_softc *sc); +static int ath5k_stop_hw(struct ath5k_softc *sc); + +static void ath5k_calibrate(struct ath5k_softc *sc); + +/* Filter */ +static void ath5k_configure_filter(struct ath5k_softc *sc); + +/********************\ +* PCI Initialization * +\********************/ + +#if DBGLVL_MAX +static const char * +ath5k_chip_name(enum ath5k_srev_type type, u16 val) +{ + const char *name = "xxxxx"; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(srev_names); i++) { + if (srev_names[i].sr_type != type) + continue; + + if ((val & 0xf0) == srev_names[i].sr_val) + name = srev_names[i].sr_name; + + if ((val & 0xff) == srev_names[i].sr_val) { + name = srev_names[i].sr_name; + break; + } + } + + return name; +} +#endif + +static int ath5k_probe(struct pci_device *pdev) +{ + void *mem; + struct ath5k_softc *sc; + struct net80211_device *dev; + int ret; + u8 csz; + + adjust_pci_device(pdev); + + /* + * Cache line size is used to size and align various + * structures used to communicate with the hardware. + */ + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz); + if (csz == 0) { + /* + * We must have this setup properly for rx buffer + * DMA to work so force a reasonable value here if it + * comes up zero. + */ + csz = 16; + pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz); + } + /* + * The default setting of latency timer yields poor results, + * set it to the value used by other systems. It may be worth + * tweaking this setting more. + */ + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8); + + /* + * Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, 0x41, 0); + + mem = ioremap(pdev->membase, 0x10000); + if (!mem) { + DBG("ath5k: cannot remap PCI memory region\n"); + ret = -EIO; + goto err; + } + + /* + * Allocate dev (net80211 main struct) + * and dev->priv (driver private data) + */ + dev = net80211_alloc(sizeof(*sc)); + if (!dev) { + DBG("ath5k: cannot allocate 802.11 device\n"); + ret = -ENOMEM; + goto err_map; + } + + /* Initialize driver private data */ + sc = dev->priv; + sc->dev = dev; + sc->pdev = pdev; + + sc->hwinfo = zalloc(sizeof(*sc->hwinfo)); + if (!sc->hwinfo) { + DBG("ath5k: cannot allocate 802.11 hardware info structure\n"); + ret = -ENOMEM; + goto err_free; + } + + sc->hwinfo->flags = NET80211_HW_RX_HAS_FCS; + sc->hwinfo->signal_type = NET80211_SIGNAL_DB; + sc->hwinfo->signal_max = 40; /* 35dB should give perfect 54Mbps */ + sc->hwinfo->channel_change_time = 5000; + + /* Avoid working with the device until setup is complete */ + sc->status |= ATH_STAT_INVALID; + + sc->iobase = mem; + sc->cachelsz = csz * 4; /* convert to bytes */ + + DBG("ath5k: register base at %p (%08lx)\n", sc->iobase, pdev->membase); + DBG("ath5k: cache line size %d\n", sc->cachelsz); + + /* Set private data */ + pci_set_drvdata(pdev, dev); + dev->netdev->dev = (struct device *)pdev; + + /* Initialize device */ + ret = ath5k_hw_attach(sc, pdev->id->driver_data, &sc->ah); + if (ret) + goto err_free_hwinfo; + + /* Finish private driver data initialization */ + ret = ath5k_attach(dev); + if (ret) + goto err_ah; + +#if DBGLVL_MAX + DBG("Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n", + ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev), + sc->ah->ah_mac_srev, sc->ah->ah_phy_revision); + + if (!sc->ah->ah_single_chip) { + /* Single chip radio (!RF5111) */ + if (sc->ah->ah_radio_5ghz_revision && + !sc->ah->ah_radio_2ghz_revision) { + /* No 5GHz support -> report 2GHz radio */ + if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A)) { + DBG("RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* No 2GHz support (5110 and some + * 5Ghz only cards) -> report 5Ghz radio */ + } else if (!(sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B)) { + DBG("RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + /* Multiband radio */ + } else { + DBG("RF%s multiband radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + } + } + /* Multi chip radio (RF5111 - RF2111) -> + * report both 2GHz/5GHz radios */ + else if (sc->ah->ah_radio_5ghz_revision && + sc->ah->ah_radio_2ghz_revision) { + DBG("RF%s 5GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_5ghz_revision), + sc->ah->ah_radio_5ghz_revision); + DBG("RF%s 2GHz radio found (0x%x)\n", + ath5k_chip_name(AR5K_VERSION_RAD, + sc->ah->ah_radio_2ghz_revision), + sc->ah->ah_radio_2ghz_revision); + } + } +#endif + + /* Ready to go */ + sc->status &= ~ATH_STAT_INVALID; + + return 0; +err_ah: + ath5k_hw_detach(sc->ah); +err_free_hwinfo: + free(sc->hwinfo); +err_free: + net80211_free(dev); +err_map: + iounmap(mem); +err: + return ret; +} + +static void ath5k_remove(struct pci_device *pdev) +{ + struct net80211_device *dev = pci_get_drvdata(pdev); + struct ath5k_softc *sc = dev->priv; + + ath5k_detach(dev); + ath5k_hw_detach(sc->ah); + iounmap(sc->iobase); + free(sc->hwinfo); + net80211_free(dev); +} + + +/***********************\ +* Driver Initialization * +\***********************/ + +static int +ath5k_attach(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_hw *ah = sc->ah; + int ret; + + /* + * Collect the channel list. The 802.11 layer + * is resposible for filtering this list based + * on settings like the phy mode and regulatory + * domain restrictions. + */ + ret = ath5k_setup_bands(dev); + if (ret) { + DBG("ath5k: can't get channels\n"); + goto err; + } + + /* NB: setup here so ath5k_rate_update is happy */ + if (ah->ah_modes & AR5K_MODE_BIT_11A) + ath5k_setcurmode(sc, AR5K_MODE_11A); + else + ath5k_setcurmode(sc, AR5K_MODE_11B); + + /* + * Allocate tx+rx descriptors and populate the lists. + */ + ret = ath5k_desc_alloc(sc); + if (ret) { + DBG("ath5k: can't allocate descriptors\n"); + goto err; + } + + /* + * Allocate hardware transmit queues. Note that hw functions + * handle reseting these queues at the needed time. + */ + ret = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE); + if (ret) { + DBG("ath5k: can't setup xmit queue\n"); + goto err_desc; + } + + sc->last_calib_ticks = currticks(); + + ret = ath5k_eeprom_read_mac(ah, sc->hwinfo->hwaddr); + if (ret) { + DBG("ath5k: unable to read address from EEPROM: 0x%04x\n", + sc->pdev->device); + goto err_queues; + } + + memset(sc->bssidmask, 0xff, ETH_ALEN); + ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask); + + ret = net80211_register(sc->dev, &ath5k_ops, sc->hwinfo); + if (ret) { + DBG("ath5k: can't register ieee80211 hw\n"); + goto err_queues; + } + + return 0; +err_queues: + ath5k_txq_release(sc); +err_desc: + ath5k_desc_free(sc); +err: + return ret; +} + +static void +ath5k_detach(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + + net80211_unregister(dev); + ath5k_desc_free(sc); + ath5k_txq_release(sc); +} + + + + +/********************\ +* Channel/mode setup * +\********************/ + +/* + * Convert IEEE channel number to MHz frequency. + */ +static inline short +ath5k_ieee2mhz(short chan) +{ + if (chan < 14) + return 2407 + 5 * chan; + if (chan == 14) + return 2484; + if (chan < 27) + return 2212 + 20 * chan; + return 5000 + 5 * chan; +} + +static unsigned int +ath5k_copy_channels(struct ath5k_hw *ah, + struct net80211_channel *channels, + unsigned int mode, unsigned int max) +{ + unsigned int i, count, size, chfreq, freq, ch; + + if (!(ah->ah_modes & (1 << mode))) + return 0; + + switch (mode) { + case AR5K_MODE_11A: + case AR5K_MODE_11A_TURBO: + /* 1..220, but 2GHz frequencies are filtered by check_channel */ + size = 220; + chfreq = CHANNEL_5GHZ; + break; + case AR5K_MODE_11B: + case AR5K_MODE_11G: + case AR5K_MODE_11G_TURBO: + size = 26; + chfreq = CHANNEL_2GHZ; + break; + default: + return 0; + } + + for (i = 0, count = 0; i < size && max > 0; i++) { + ch = i + 1 ; + freq = ath5k_ieee2mhz(ch); + + /* Check if channel is supported by the chipset */ + if (!ath5k_channel_ok(ah, freq, chfreq)) + continue; + + /* Write channel info and increment counter */ + channels[count].center_freq = freq; + channels[count].maxpower = 0; /* use regulatory */ + channels[count].band = (chfreq == CHANNEL_2GHZ) ? + NET80211_BAND_2GHZ : NET80211_BAND_5GHZ; + switch (mode) { + case AR5K_MODE_11A: + case AR5K_MODE_11G: + channels[count].hw_value = chfreq | CHANNEL_OFDM; + break; + case AR5K_MODE_11A_TURBO: + case AR5K_MODE_11G_TURBO: + channels[count].hw_value = chfreq | + CHANNEL_OFDM | CHANNEL_TURBO; + break; + case AR5K_MODE_11B: + channels[count].hw_value = CHANNEL_B; + } + + count++; + max--; + } + + return count; +} + +static int +ath5k_setup_bands(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_hw *ah = sc->ah; + int max_c, count_c = 0; + int i; + int band; + + max_c = sizeof(sc->hwinfo->channels) / sizeof(sc->hwinfo->channels[0]); + + /* 2GHz band */ + if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11G) { + /* G mode */ + band = NET80211_BAND_2GHZ; + sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ; + sc->hwinfo->modes = (NET80211_MODE_G | NET80211_MODE_B); + + for (i = 0; i < 12; i++) + sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate; + sc->hwinfo->nr_rates[band] = 12; + + sc->hwinfo->nr_channels = + ath5k_copy_channels(ah, sc->hwinfo->channels, + AR5K_MODE_11G, max_c); + count_c = sc->hwinfo->nr_channels; + max_c -= count_c; + } else if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11B) { + /* B mode */ + band = NET80211_BAND_2GHZ; + sc->hwinfo->bands = NET80211_BAND_BIT_2GHZ; + sc->hwinfo->modes = NET80211_MODE_B; + + for (i = 0; i < 4; i++) + sc->hwinfo->rates[band][i] = ath5k_rates[i].bitrate; + sc->hwinfo->nr_rates[band] = 4; + + sc->hwinfo->nr_channels = + ath5k_copy_channels(ah, sc->hwinfo->channels, + AR5K_MODE_11B, max_c); + count_c = sc->hwinfo->nr_channels; + max_c -= count_c; + } + + /* 5GHz band, A mode */ + if (sc->ah->ah_capabilities.cap_mode & AR5K_MODE_BIT_11A) { + band = NET80211_BAND_5GHZ; + sc->hwinfo->bands |= NET80211_BAND_BIT_5GHZ; + sc->hwinfo->modes |= NET80211_MODE_A; + + for (i = 0; i < 8; i++) + sc->hwinfo->rates[band][i] = ath5k_rates[i+4].bitrate; + sc->hwinfo->nr_rates[band] = 8; + + sc->hwinfo->nr_channels = + ath5k_copy_channels(ah, sc->hwinfo->channels, + AR5K_MODE_11B, max_c); + count_c = sc->hwinfo->nr_channels; + max_c -= count_c; + } + + return 0; +} + +/* + * Set/change channels. If the channel is really being changed, + * it's done by reseting the chip. To accomplish this we must + * first cleanup any pending DMA, then restart stuff after a la + * ath5k_init. + */ +static int +ath5k_chan_set(struct ath5k_softc *sc, struct net80211_channel *chan) +{ + if (chan->center_freq != sc->curchan->center_freq || + chan->hw_value != sc->curchan->hw_value) { + /* + * To switch channels clear any pending DMA operations; + * wait long enough for the RX fifo to drain, reset the + * hardware at the new frequency, and then re-enable + * the relevant bits of the h/w. + */ + DBG2("ath5k: resetting for channel change (%d -> %d MHz)\n", + sc->curchan->center_freq, chan->center_freq); + return ath5k_reset(sc, chan); + } + + return 0; +} + +static void +ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode) +{ + sc->curmode = mode; + + if (mode == AR5K_MODE_11A) { + sc->curband = NET80211_BAND_5GHZ; + } else { + sc->curband = NET80211_BAND_2GHZ; + } +} + +static void +ath5k_mode_setup(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + + /* configure rx filter */ + rfilt = sc->filter_flags; + ath5k_hw_set_rx_filter(ah, rfilt); + + if (ath5k_hw_hasbssidmask(ah)) + ath5k_hw_set_bssid_mask(ah, sc->bssidmask); + + /* configure operational mode */ + ath5k_hw_set_opmode(ah); + + ath5k_hw_set_mcast_filter(ah, 0, 0); +} + +static inline int +ath5k_hw_rix_to_bitrate(int hw_rix) +{ + int i; + + for (i = 0; i < ATH5K_NR_RATES; i++) { + if (ath5k_rates[i].hw_code == hw_rix) + return ath5k_rates[i].bitrate; + } + + DBG("ath5k: invalid rix %02x\n", hw_rix); + return 10; /* use lowest rate */ +} + +int ath5k_bitrate_to_hw_rix(int bitrate) +{ + int i; + + for (i = 0; i < ATH5K_NR_RATES; i++) { + if (ath5k_rates[i].bitrate == bitrate) + return ath5k_rates[i].hw_code; + } + + DBG("ath5k: invalid bitrate %d\n", bitrate); + return ATH5K_RATE_CODE_1M; /* use lowest rate */ +} + +/***************\ +* Buffers setup * +\***************/ + +static struct io_buffer * +ath5k_rx_iob_alloc(struct ath5k_softc *sc, u32 *iob_addr) +{ + struct io_buffer *iob; + unsigned int off; + + /* + * Allocate buffer with headroom_needed space for the + * fake physical layer header at the start. + */ + iob = alloc_iob(sc->rxbufsize + sc->cachelsz - 1); + + if (!iob) { + DBG("ath5k: can't alloc iobuf of size %d\n", + sc->rxbufsize + sc->cachelsz - 1); + return NULL; + } + + *iob_addr = virt_to_bus(iob->data); + + /* + * Cache-line-align. This is important (for the + * 5210 at least) as not doing so causes bogus data + * in rx'd frames. + */ + off = *iob_addr % sc->cachelsz; + if (off != 0) { + iob_reserve(iob, sc->cachelsz - off); + *iob_addr += sc->cachelsz - off; + } + + return iob; +} + +static int +ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) +{ + struct ath5k_hw *ah = sc->ah; + struct io_buffer *iob = bf->iob; + struct ath5k_desc *ds; + + if (!iob) { + iob = ath5k_rx_iob_alloc(sc, &bf->iobaddr); + if (!iob) + return -ENOMEM; + bf->iob = iob; + } + + /* + * Setup descriptors. For receive we always terminate + * the descriptor list with a self-linked entry so we'll + * not get overrun under high load (as can happen with a + * 5212 when ANI processing enables PHY error frames). + * + * To insure the last descriptor is self-linked we create + * each descriptor as self-linked and add it to the end. As + * each additional descriptor is added the previous self-linked + * entry is ``fixed'' naturally. This should be safe even + * if DMA is happening. When processing RX interrupts we + * never remove/process the last, self-linked, entry on the + * descriptor list. This insures the hardware always has + * someplace to write a new frame. + */ + ds = bf->desc; + ds->ds_link = bf->daddr; /* link to self */ + ds->ds_data = bf->iobaddr; + if (ah->ah_setup_rx_desc(ah, ds, + iob_tailroom(iob), /* buffer size */ + 0) != 0) { + DBG("ath5k: error setting up RX descriptor for %zd bytes\n", iob_tailroom(iob)); + return -EINVAL; + } + + if (sc->rxlink != NULL) + *sc->rxlink = bf->daddr; + sc->rxlink = &ds->ds_link; + return 0; +} + +static int +ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq *txq = &sc->txq; + struct ath5k_desc *ds = bf->desc; + struct io_buffer *iob = bf->iob; + unsigned int pktlen, flags; + int ret; + u16 duration = 0; + u16 cts_rate = 0; + + flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK; + bf->iobaddr = virt_to_bus(iob->data); + pktlen = iob_len(iob); + + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ + if (sc->dev->phy_flags & NET80211_PHY_USE_PROTECTION) { + struct net80211_device *dev = sc->dev; + + flags |= AR5K_TXDESC_CTSENA; + cts_rate = sc->hw_rtscts_rate; + duration = net80211_cts_duration(dev, pktlen); + } + ret = ah->ah_setup_tx_desc(ah, ds, pktlen, + IEEE80211_TYP_FRAME_HEADER_LEN, + AR5K_PKT_TYPE_NORMAL, sc->power_level * 2, + sc->hw_rate, ATH5K_RETRIES, + AR5K_TXKEYIX_INVALID, 0, flags, + cts_rate, duration); + if (ret) + return ret; + + ds->ds_link = 0; + ds->ds_data = bf->iobaddr; + + list_add_tail(&bf->list, &txq->q); + if (txq->link == NULL) /* is this first packet? */ + ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr); + else /* no, so only link it */ + *txq->link = bf->daddr; + + txq->link = &ds->ds_link; + ath5k_hw_start_tx_dma(ah, txq->qnum); + mb(); + + return 0; +} + +/*******************\ +* Descriptors setup * +\*******************/ + +static int +ath5k_desc_alloc(struct ath5k_softc *sc) +{ + struct ath5k_desc *ds; + struct ath5k_buf *bf; + u32 da; + unsigned int i; + int ret; + + /* allocate descriptors */ + sc->desc_len = sizeof(struct ath5k_desc) * (ATH_TXBUF + ATH_RXBUF + 1); + sc->desc = malloc_dma(sc->desc_len, ATH5K_DESC_ALIGN); + if (sc->desc == NULL) { + DBG("ath5k: can't allocate descriptors\n"); + ret = -ENOMEM; + goto err; + } + memset(sc->desc, 0, sc->desc_len); + sc->desc_daddr = virt_to_bus(sc->desc); + + ds = sc->desc; + da = sc->desc_daddr; + + bf = calloc(ATH_TXBUF + ATH_RXBUF + 1, sizeof(struct ath5k_buf)); + if (bf == NULL) { + DBG("ath5k: can't allocate buffer pointers\n"); + ret = -ENOMEM; + goto err_free; + } + sc->bufptr = bf; + + INIT_LIST_HEAD(&sc->rxbuf); + for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->rxbuf); + } + + INIT_LIST_HEAD(&sc->txbuf); + sc->txbuf_len = ATH_TXBUF; + for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) { + bf->desc = ds; + bf->daddr = da; + list_add_tail(&bf->list, &sc->txbuf); + } + + return 0; + +err_free: + free_dma(sc->desc, sc->desc_len); +err: + sc->desc = NULL; + return ret; +} + +static void +ath5k_desc_free(struct ath5k_softc *sc) +{ + struct ath5k_buf *bf; + + list_for_each_entry(bf, &sc->txbuf, list) + ath5k_txbuf_free(sc, bf); + list_for_each_entry(bf, &sc->rxbuf, list) + ath5k_rxbuf_free(sc, bf); + + /* Free memory associated with all descriptors */ + free_dma(sc->desc, sc->desc_len); + + free(sc->bufptr); + sc->bufptr = NULL; +} + + + + + +/**************\ +* Queues setup * +\**************/ + +static int +ath5k_txq_setup(struct ath5k_softc *sc, int qtype, int subtype) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_txq *txq; + struct ath5k_txq_info qi = { + .tqi_subtype = subtype, + .tqi_aifs = AR5K_TXQ_USEDEFAULT, + .tqi_cw_min = AR5K_TXQ_USEDEFAULT, + .tqi_cw_max = AR5K_TXQ_USEDEFAULT + }; + int qnum; + + /* + * Enable interrupts only for EOL and DESC conditions. + * We mark tx descriptors to receive a DESC interrupt + * when a tx queue gets deep; otherwise waiting for the + * EOL to reap descriptors. Note that this is done to + * reduce interrupt load and this only defers reaping + * descriptors, never transmitting frames. Aside from + * reducing interrupts this also permits more concurrency. + * The only potential downside is if the tx queue backs + * up in which case the top half of the kernel may backup + * due to a lack of tx descriptors. + */ + qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE | + AR5K_TXQ_FLAG_TXDESCINT_ENABLE; + qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi); + if (qnum < 0) { + DBG("ath5k: can't set up a TX queue\n"); + return -EIO; + } + + txq = &sc->txq; + if (!txq->setup) { + txq->qnum = qnum; + txq->link = NULL; + INIT_LIST_HEAD(&txq->q); + txq->setup = 1; + } + return 0; +} + +static void +ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq) +{ + struct ath5k_buf *bf, *bf0; + + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ath5k_txbuf_free(sc, bf); + + list_del(&bf->list); + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + } + txq->link = NULL; +} + +/* + * Drain the transmit queues and reclaim resources. + */ +static void +ath5k_txq_cleanup(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + if (!(sc->status & ATH_STAT_INVALID)) { + /* don't touch the hardware if marked invalid */ + if (sc->txq.setup) { + ath5k_hw_stop_tx_dma(ah, sc->txq.qnum); + DBG("ath5k: txq [%d] %x, link %p\n", + sc->txq.qnum, + ath5k_hw_get_txdp(ah, sc->txq.qnum), + sc->txq.link); + } + } + + if (sc->txq.setup) + ath5k_txq_drainq(sc, &sc->txq); +} + +static void +ath5k_txq_release(struct ath5k_softc *sc) +{ + if (sc->txq.setup) { + ath5k_hw_release_tx_queue(sc->ah); + sc->txq.setup = 0; + } +} + + + + +/*************\ +* RX Handling * +\*************/ + +/* + * Enable the receive h/w following a reset. + */ +static int +ath5k_rx_start(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + struct ath5k_buf *bf; + int ret; + + sc->rxbufsize = IEEE80211_MAX_LEN; + if (sc->rxbufsize % sc->cachelsz != 0) + sc->rxbufsize += sc->cachelsz - (sc->rxbufsize % sc->cachelsz); + + sc->rxlink = NULL; + + list_for_each_entry(bf, &sc->rxbuf, list) { + ret = ath5k_rxbuf_setup(sc, bf); + if (ret != 0) + return ret; + } + + bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list); + + ath5k_hw_set_rxdp(ah, bf->daddr); + ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */ + ath5k_mode_setup(sc); /* set filters, etc. */ + ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */ + + return 0; +} + +/* + * Disable the receive h/w in preparation for a reset. + */ +static void +ath5k_rx_stop(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + ath5k_hw_stop_rx_pcu(ah); /* disable PCU */ + ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ + ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ + + sc->rxlink = NULL; /* just in case */ +} + +static void +ath5k_handle_rx(struct ath5k_softc *sc) +{ + struct ath5k_rx_status rs; + struct io_buffer *iob, *next_iob; + u32 next_iob_addr; + struct ath5k_buf *bf, *bf_last; + struct ath5k_desc *ds; + int ret; + + memset(&rs, 0, sizeof(rs)); + + if (list_empty(&sc->rxbuf)) { + DBG("ath5k: empty rx buf pool\n"); + return; + } + + bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); + + do { + bf = list_entry(sc->rxbuf.next, struct ath5k_buf, list); + assert(bf->iob != NULL); + iob = bf->iob; + ds = bf->desc; + + /* + * last buffer must not be freed to ensure proper hardware + * function. When the hardware finishes also a packet next to + * it, we are sure, it doesn't use it anymore and we can go on. + */ + if (bf_last == bf) + bf->flags |= 1; + if (bf->flags) { + struct ath5k_buf *bf_next = list_entry(bf->list.next, + struct ath5k_buf, list); + ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, + &rs); + if (ret) + break; + bf->flags &= ~1; + /* skip the overwritten one (even status is martian) */ + goto next; + } + + ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); + if (ret) { + if (ret != -EINPROGRESS) { + DBG("ath5k: error in processing rx desc: %s\n", + strerror(ret)); + net80211_rx_err(sc->dev, NULL, -ret); + } else { + /* normal return, reached end of + available descriptors */ + } + return; + } + + if (rs.rs_more) { + DBG("ath5k: unsupported fragmented rx\n"); + goto next; + } + + if (rs.rs_status) { + if (rs.rs_status & AR5K_RXERR_PHY) { + /* These are uncommon, and may indicate a real problem. */ + net80211_rx_err(sc->dev, NULL, EIO); + goto next; + } + if (rs.rs_status & AR5K_RXERR_CRC) { + /* These occur *all the time*. */ + goto next; + } + if (rs.rs_status & AR5K_RXERR_DECRYPT) { + /* + * Decrypt error. If the error occurred + * because there was no hardware key, then + * let the frame through so the upper layers + * can process it. This is necessary for 5210 + * parts which have no way to setup a ``clear'' + * key cache entry. + * + * XXX do key cache faulting + */ + if (rs.rs_keyix == AR5K_RXKEYIX_INVALID && + !(rs.rs_status & AR5K_RXERR_CRC)) + goto accept; + } + + /* any other error, unhandled */ + DBG("ath5k: packet rx status %x\n", rs.rs_status); + goto next; + } +accept: + next_iob = ath5k_rx_iob_alloc(sc, &next_iob_addr); + + /* + * If we can't replace bf->iob with a new iob under memory + * pressure, just skip this packet + */ + if (!next_iob) { + DBG("ath5k: dropping packet under memory pressure\n"); + goto next; + } + + iob_put(iob, rs.rs_datalen); + + /* The MAC header is padded to have 32-bit boundary if the + * packet payload is non-zero. However, iPXE only + * supports standard 802.11 packets with 24-byte + * header, so no padding correction should be needed. + */ + + DBG2("ath5k: rx %d bytes, signal %d\n", rs.rs_datalen, + rs.rs_rssi); + + net80211_rx(sc->dev, iob, rs.rs_rssi, + ath5k_hw_rix_to_bitrate(rs.rs_rate)); + + bf->iob = next_iob; + bf->iobaddr = next_iob_addr; +next: + list_del(&bf->list); + list_add_tail(&bf->list, &sc->rxbuf); + } while (ath5k_rxbuf_setup(sc, bf) == 0); +} + + + + +/*************\ +* TX Handling * +\*************/ + +static void +ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) +{ + struct ath5k_tx_status ts; + struct ath5k_buf *bf, *bf0; + struct ath5k_desc *ds; + struct io_buffer *iob; + int ret; + + memset(&ts, 0, sizeof(ts)); + + list_for_each_entry_safe(bf, bf0, &txq->q, list) { + ds = bf->desc; + + ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); + if (ret) { + if (ret != -EINPROGRESS) { + DBG("ath5k: error in processing tx desc: %s\n", + strerror(ret)); + } else { + /* normal return, reached end of tx completions */ + } + break; + } + + iob = bf->iob; + bf->iob = NULL; + + DBG2("ath5k: tx %zd bytes complete, %d retries\n", + iob_len(iob), ts.ts_retry[0]); + + net80211_tx_complete(sc->dev, iob, ts.ts_retry[0], + ts.ts_status ? EIO : 0); + + list_del(&bf->list); + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + } + + if (list_empty(&txq->q)) + txq->link = NULL; +} + +static void +ath5k_handle_tx(struct ath5k_softc *sc) +{ + ath5k_tx_processq(sc, &sc->txq); +} + + +/********************\ +* Interrupt handling * +\********************/ + +static void +ath5k_irq(struct net80211_device *dev, int enable) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_hw *ah = sc->ah; + + sc->irq_ena = enable; + ah->ah_ier = enable ? AR5K_IER_ENABLE : AR5K_IER_DISABLE; + + ath5k_hw_reg_write(ah, ah->ah_ier, AR5K_IER); + ath5k_hw_set_imr(ah, sc->imask); +} + +static int +ath5k_init(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + int ret, i; + + /* + * Stop anything previously setup. This is safe + * no matter this is the first time through or not. + */ + ath5k_stop_hw(sc); + + /* + * The basic interface to setting the hardware in a good + * state is ``reset''. On return the hardware is known to + * be powered up and with interrupts disabled. This must + * be followed by initialization of the appropriate bits + * and then setup of the interrupt mask. + */ + sc->curchan = sc->dev->channels + sc->dev->channel; + sc->curband = sc->curchan->band; + sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | + AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | + AR5K_INT_FATAL | AR5K_INT_GLOBAL; + ret = ath5k_reset(sc, NULL); + if (ret) + goto done; + + ath5k_rfkill_hw_start(ah); + + /* + * Reset the key cache since some parts do not reset the + * contents on initial power up or resume from suspend. + */ + for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) + ath5k_hw_reset_key(ah, i); + + /* Set ack to be sent at low bit-rates */ + ath5k_hw_set_ack_bitrate_high(ah, 0); + + ret = 0; +done: + mb(); + return ret; +} + +static int +ath5k_stop_hw(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + /* + * Shutdown the hardware and driver: + * stop output from above + * disable interrupts + * turn off timers + * turn off the radio + * clear transmit machinery + * clear receive machinery + * drain and release tx queues + * reclaim beacon resources + * power down hardware + * + * Note that some of this work is not possible if the + * hardware is gone (invalid). + */ + + if (!(sc->status & ATH_STAT_INVALID)) { + ath5k_hw_set_imr(ah, 0); + } + ath5k_txq_cleanup(sc); + if (!(sc->status & ATH_STAT_INVALID)) { + ath5k_rx_stop(sc); + ath5k_hw_phy_disable(ah); + } else + sc->rxlink = NULL; + + ath5k_rfkill_hw_stop(sc->ah); + + return 0; +} + +static void +ath5k_poll(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_hw *ah = sc->ah; + enum ath5k_int status; + unsigned int counter = 1000; + + if (currticks() - sc->last_calib_ticks > + ATH5K_CALIB_INTERVAL * ticks_per_sec()) { + ath5k_calibrate(sc); + sc->last_calib_ticks = currticks(); + } + + if ((sc->status & ATH_STAT_INVALID) || + (sc->irq_ena && !ath5k_hw_is_intr_pending(ah))) + return; + + do { + ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */ + DBGP("ath5k: status %#x/%#x\n", status, sc->imask); + if (status & AR5K_INT_FATAL) { + /* + * Fatal errors are unrecoverable. + * Typically these are caused by DMA errors. + */ + DBG("ath5k: fatal error, resetting\n"); + ath5k_reset_wake(sc); + } else if (status & AR5K_INT_RXORN) { + DBG("ath5k: rx overrun, resetting\n"); + ath5k_reset_wake(sc); + } else { + if (status & AR5K_INT_RXEOL) { + /* + * NB: the hardware should re-read the link when + * RXE bit is written, but it doesn't work at + * least on older hardware revs. + */ + DBG("ath5k: rx EOL\n"); + sc->rxlink = NULL; + } + if (status & AR5K_INT_TXURN) { + /* bump tx trigger level */ + DBG("ath5k: tx underrun\n"); + ath5k_hw_update_tx_triglevel(ah, 1); + } + if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR)) + ath5k_handle_rx(sc); + if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC + | AR5K_INT_TXERR | AR5K_INT_TXEOL)) + ath5k_handle_tx(sc); + } + } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0); + + if (!counter) + DBG("ath5k: too many interrupts, giving up for now\n"); +} + +/* + * Periodically recalibrate the PHY to account + * for temperature/environment changes. + */ +static void +ath5k_calibrate(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + + if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) { + /* + * Rfgain is out of bounds, reset the chip + * to load new gain values. + */ + DBG("ath5k: resetting for calibration\n"); + ath5k_reset_wake(sc); + } + if (ath5k_hw_phy_calibrate(ah, sc->curchan)) + DBG("ath5k: calibration of channel %d failed\n", + sc->curchan->channel_nr); +} + + +/********************\ +* Net80211 functions * +\********************/ + +static int +ath5k_tx(struct net80211_device *dev, struct io_buffer *iob) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_buf *bf; + int rc; + + /* + * The hardware expects the header padded to 4 byte boundaries. + * iPXE only ever sends 24-byte headers, so no action necessary. + */ + + if (list_empty(&sc->txbuf)) { + DBG("ath5k: dropping packet because no tx bufs available\n"); + return -ENOBUFS; + } + + bf = list_entry(sc->txbuf.next, struct ath5k_buf, list); + list_del(&bf->list); + sc->txbuf_len--; + + bf->iob = iob; + + if ((rc = ath5k_txbuf_setup(sc, bf)) != 0) { + bf->iob = NULL; + list_add_tail(&bf->list, &sc->txbuf); + sc->txbuf_len++; + return rc; + } + return 0; +} + +/* + * Reset the hardware. If chan is not NULL, then also pause rx/tx + * and change to the given channel. + */ +static int +ath5k_reset(struct ath5k_softc *sc, struct net80211_channel *chan) +{ + struct ath5k_hw *ah = sc->ah; + int ret; + + if (chan) { + ath5k_hw_set_imr(ah, 0); + ath5k_txq_cleanup(sc); + ath5k_rx_stop(sc); + + sc->curchan = chan; + sc->curband = chan->band; + } + + ret = ath5k_hw_reset(ah, sc->curchan, 1); + if (ret) { + DBG("ath5k: can't reset hardware: %s\n", strerror(ret)); + return ret; + } + + ret = ath5k_rx_start(sc); + if (ret) { + DBG("ath5k: can't start rx logic: %s\n", strerror(ret)); + return ret; + } + + /* + * Change channels and update the h/w rate map if we're switching; + * e.g. 11a to 11b/g. + * + * We may be doing a reset in response to an ioctl that changes the + * channel so update any state that might change as a result. + * + * XXX needed? + */ +/* ath5k_chan_change(sc, c); */ + + /* Reenable interrupts if necessary */ + ath5k_irq(sc->dev, sc->irq_ena); + + return 0; +} + +static int ath5k_reset_wake(struct ath5k_softc *sc) +{ + return ath5k_reset(sc, sc->curchan); +} + +static int ath5k_start(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + int ret; + + if ((ret = ath5k_init(sc)) != 0) + return ret; + + sc->assoc = 0; + ath5k_configure_filter(sc); + ath5k_hw_set_lladdr(sc->ah, dev->netdev->ll_addr); + + return 0; +} + +static void ath5k_stop(struct net80211_device *dev) +{ + struct ath5k_softc *sc = dev->priv; + u8 mac[ETH_ALEN] = {}; + + ath5k_hw_set_lladdr(sc->ah, mac); + + ath5k_stop_hw(sc); +} + +static int +ath5k_config(struct net80211_device *dev, int changed) +{ + struct ath5k_softc *sc = dev->priv; + struct ath5k_hw *ah = sc->ah; + struct net80211_channel *chan = &dev->channels[dev->channel]; + int ret; + + if (changed & NET80211_CFG_CHANNEL) { + sc->power_level = chan->maxpower; + if ((ret = ath5k_chan_set(sc, chan)) != 0) + return ret; + } + + if ((changed & NET80211_CFG_RATE) || + (changed & NET80211_CFG_PHY_PARAMS)) { + int spmbl = ATH5K_SPMBL_NO; + u16 rate = dev->rates[dev->rate]; + u16 slowrate = dev->rates[dev->rtscts_rate]; + int i; + + if (dev->phy_flags & NET80211_PHY_USE_SHORT_PREAMBLE) + spmbl = ATH5K_SPMBL_YES; + + for (i = 0; i < ATH5K_NR_RATES; i++) { + if (ath5k_rates[i].bitrate == rate && + (ath5k_rates[i].short_pmbl & spmbl)) + sc->hw_rate = ath5k_rates[i].hw_code; + + if (ath5k_rates[i].bitrate == slowrate && + (ath5k_rates[i].short_pmbl & spmbl)) + sc->hw_rtscts_rate = ath5k_rates[i].hw_code; + } + } + + if (changed & NET80211_CFG_ASSOC) { + sc->assoc = !!(dev->state & NET80211_ASSOCIATED); + if (sc->assoc) { + memcpy(ah->ah_bssid, dev->bssid, ETH_ALEN); + } else { + memset(ah->ah_bssid, 0xff, ETH_ALEN); + } + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + } + + return 0; +} + +/* + * o always accept unicast, broadcast, and multicast traffic + * o multicast traffic for all BSSIDs will be enabled if mac80211 + * says it should be + * o maintain current state of phy ofdm or phy cck error reception. + * If the hardware detects any of these type of errors then + * ath5k_hw_get_rx_filter() will pass to us the respective + * hardware filters to be able to receive these type of frames. + * o probe request frames are accepted only when operating in + * hostap, adhoc, or monitor modes + * o enable promiscuous mode according to the interface state + * o accept beacons: + * - when operating in adhoc mode so the 802.11 layer creates + * node table entries for peers, + * - when operating in station mode for collecting rssi data when + * the station is otherwise quiet, or + * - when scanning + */ +static void ath5k_configure_filter(struct ath5k_softc *sc) +{ + struct ath5k_hw *ah = sc->ah; + u32 mfilt[2], rfilt; + + /* Enable all multicast */ + mfilt[0] = ~0; + mfilt[1] = ~0; + + /* Enable data frames and beacons */ + rfilt = (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST | + AR5K_RX_FILTER_MCAST | AR5K_RX_FILTER_BEACON); + + /* Set filters */ + ath5k_hw_set_rx_filter(ah, rfilt); + + /* Set multicast bits */ + ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]); + + /* Set the cached hw filter flags, this will alter actually + * be set in HW */ + sc->filter_flags = rfilt; +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.h new file mode 100644 index 000000000..30e2024c6 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k.h @@ -0,0 +1,1279 @@ +/* + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * + * Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net> + * Original from Linux kernel 2.6.30. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _ATH5K_H +#define _ATH5K_H + +FILE_LICENCE ( MIT ); + +#include <stddef.h> +#include <byteswap.h> +#include <ipxe/io.h> +#include <ipxe/netdevice.h> +#include <ipxe/net80211.h> +#include <errno.h> + +/* Keep all ath5k files under one errfile ID */ +#undef ERRFILE +#define ERRFILE ERRFILE_ath5k + +#define ARRAY_SIZE(a) (sizeof(a)/sizeof((a)[0])) + +/* RX/TX descriptor hw structs */ +#include "desc.h" + +/* EEPROM structs/offsets */ +#include "eeprom.h" + +/* PCI IDs */ +#define PCI_DEVICE_ID_ATHEROS_AR5210 0x0007 /* AR5210 */ +#define PCI_DEVICE_ID_ATHEROS_AR5311 0x0011 /* AR5311 */ +#define PCI_DEVICE_ID_ATHEROS_AR5211 0x0012 /* AR5211 */ +#define PCI_DEVICE_ID_ATHEROS_AR5212 0x0013 /* AR5212 */ +#define PCI_DEVICE_ID_3COM_3CRDAG675 0x0013 /* 3CRDAG675 (Atheros AR5212) */ +#define PCI_DEVICE_ID_3COM_2_3CRPAG175 0x0013 /* 3CRPAG175 (Atheros AR5212) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_AP 0x0207 /* AR5210 (Early) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM 0x1014 /* AR5212 (IBM MiniPCI) */ +#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT 0x1107 /* AR5210 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT 0x1113 /* AR5212 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT 0x1112 /* AR5211 (no eeprom) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA 0xf013 /* AR5212 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY 0xff12 /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B 0xf11b /* AR5211 (emulation board) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ +#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8 0x0058 /* AR5312 WMAC (AP43-030) */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0014 0x0014 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0015 0x0015 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0016 0x0016 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0017 0x0017 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0018 0x0018 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR5212_0019 0x0019 /* AR5212 compatible */ +#define PCI_DEVICE_ID_ATHEROS_AR2413 0x001a /* AR2413 (Griffin-lite) */ +#define PCI_DEVICE_ID_ATHEROS_AR5413 0x001b /* AR5413 (Eagle) */ +#define PCI_DEVICE_ID_ATHEROS_AR5424 0x001c /* AR5424 (Condor PCI-E) */ +#define PCI_DEVICE_ID_ATHEROS_AR5416 0x0023 /* AR5416 */ +#define PCI_DEVICE_ID_ATHEROS_AR5418 0x0024 /* AR5418 */ + +/****************************\ + GENERIC DRIVER DEFINITIONS +\****************************/ + +/* + * AR5K REGISTER ACCESS + */ + +/* Some macros to read/write fields */ + +/* First shift, then mask */ +#define AR5K_REG_SM(_val, _flags) \ + (((_val) << _flags##_S) & (_flags)) + +/* First mask, then shift */ +#define AR5K_REG_MS(_val, _flags) \ + (((_val) & (_flags)) >> _flags##_S) + +/* Some registers can hold multiple values of interest. For this + * reason when we want to write to these registers we must first + * retrieve the values which we do not want to clear (lets call this + * old_data) and then set the register with this and our new_value: + * ( old_data | new_value) */ +#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \ + (((_val) << _flags##_S) & (_flags)), _reg) + +#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask) \ + ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & \ + (_mask)) | (_flags), _reg) + +#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg) + +#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags) \ + ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg) + +/* Access to PHY registers */ +#define AR5K_PHY_READ(ah, _reg) \ + ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2)) + +#define AR5K_PHY_WRITE(ah, _reg, _val) \ + ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2)) + +/* Access QCU registers per queue */ +#define AR5K_REG_READ_Q(ah, _reg, _queue) \ + (ath5k_hw_reg_read(ah, _reg) & (1 << _queue)) \ + +#define AR5K_REG_WRITE_Q(ah, _reg, _queue) \ + ath5k_hw_reg_write(ah, (1 << _queue), _reg) + +#define AR5K_Q_ENABLE_BITS(_reg, _queue) do { \ + _reg |= 1 << _queue; \ +} while (0) + +#define AR5K_Q_DISABLE_BITS(_reg, _queue) do { \ + _reg &= ~(1 << _queue); \ +} while (0) + +/* Used while writing initvals */ +#define AR5K_REG_WAIT(_i) do { \ + if (_i % 64) \ + udelay(1); \ +} while (0) + +/* Register dumps are done per operation mode */ +#define AR5K_INI_RFGAIN_5GHZ 0 +#define AR5K_INI_RFGAIN_2GHZ 1 + +/* TODO: Clean this up */ +#define AR5K_INI_VAL_11A 0 +#define AR5K_INI_VAL_11A_TURBO 1 +#define AR5K_INI_VAL_11B 2 +#define AR5K_INI_VAL_11G 3 +#define AR5K_INI_VAL_11G_TURBO 4 +#define AR5K_INI_VAL_XR 0 +#define AR5K_INI_VAL_MAX 5 + +/* Used for BSSID etc manipulation */ +#define AR5K_LOW_ID(_a)( \ +(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24 \ +) + +#define AR5K_HIGH_ID(_a) ((_a)[4] | (_a)[5] << 8) + +#define IEEE80211_MAX_LEN 2352 + +/* + * Some tuneable values (these should be changeable by the user) + */ +#define AR5K_TUNE_DMA_BEACON_RESP 2 +#define AR5K_TUNE_SW_BEACON_RESP 10 +#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF 0 +#define AR5K_TUNE_RADAR_ALERT 0 +#define AR5K_TUNE_MIN_TX_FIFO_THRES 1 +#define AR5K_TUNE_MAX_TX_FIFO_THRES ((IEEE80211_MAX_LEN / 64) + 1) +#define AR5K_TUNE_REGISTER_TIMEOUT 20000 +/* Register for RSSI threshold has a mask of 0xff, so 255 seems to + * be the max value. */ +#define AR5K_TUNE_RSSI_THRES 129 +/* This must be set when setting the RSSI threshold otherwise it can + * prevent a reset. If AR5K_RSSI_THR is read after writing to it + * the BMISS_THRES will be seen as 0, seems harware doesn't keep + * track of it. Max value depends on harware. For AR5210 this is just 7. + * For AR5211+ this seems to be up to 255. */ +#define AR5K_TUNE_BMISS_THRES 7 +#define AR5K_TUNE_REGISTER_DWELL_TIME 20000 +#define AR5K_TUNE_BEACON_INTERVAL 100 +#define AR5K_TUNE_AIFS 2 +#define AR5K_TUNE_AIFS_11B 2 +#define AR5K_TUNE_AIFS_XR 0 +#define AR5K_TUNE_CWMIN 15 +#define AR5K_TUNE_CWMIN_11B 31 +#define AR5K_TUNE_CWMIN_XR 3 +#define AR5K_TUNE_CWMAX 1023 +#define AR5K_TUNE_CWMAX_11B 1023 +#define AR5K_TUNE_CWMAX_XR 7 +#define AR5K_TUNE_NOISE_FLOOR -72 +#define AR5K_TUNE_MAX_TXPOWER 63 +#define AR5K_TUNE_DEFAULT_TXPOWER 25 +#define AR5K_TUNE_TPC_TXPOWER 0 +#define AR5K_TUNE_ANT_DIVERSITY 1 +#define AR5K_TUNE_HWTXTRIES 4 + +#define AR5K_INIT_CARR_SENSE_EN 1 + +/*Swap RX/TX Descriptor for big endian archs*/ +#if __BYTE_ORDER == __BIG_ENDIAN +#define AR5K_INIT_CFG ( \ + AR5K_CFG_SWTD | AR5K_CFG_SWRD \ +) +#else +#define AR5K_INIT_CFG 0x00000000 +#endif + +/* Initial values */ +#define AR5K_INIT_CYCRSSI_THR1 2 +#define AR5K_INIT_TX_LATENCY 502 +#define AR5K_INIT_USEC 39 +#define AR5K_INIT_USEC_TURBO 79 +#define AR5K_INIT_USEC_32 31 +#define AR5K_INIT_SLOT_TIME 396 +#define AR5K_INIT_SLOT_TIME_TURBO 480 +#define AR5K_INIT_ACK_CTS_TIMEOUT 1024 +#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO 0x08000800 +#define AR5K_INIT_PROG_IFS 920 +#define AR5K_INIT_PROG_IFS_TURBO 960 +#define AR5K_INIT_EIFS 3440 +#define AR5K_INIT_EIFS_TURBO 6880 +#define AR5K_INIT_SIFS 560 +#define AR5K_INIT_SIFS_TURBO 480 +#define AR5K_INIT_SH_RETRY 10 +#define AR5K_INIT_LG_RETRY AR5K_INIT_SH_RETRY +#define AR5K_INIT_SSH_RETRY 32 +#define AR5K_INIT_SLG_RETRY AR5K_INIT_SSH_RETRY +#define AR5K_INIT_TX_RETRY 10 + +#define AR5K_INIT_TRANSMIT_LATENCY ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC) \ +) +#define AR5K_INIT_TRANSMIT_LATENCY_TURBO ( \ + (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) | \ + (AR5K_INIT_USEC_TURBO) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) | \ + (AR5K_INIT_PROG_IFS) \ +) +#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO ( \ + (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \ + (AR5K_INIT_PROG_IFS_TURBO) \ +) + +/* token to use for aifs, cwmin, cwmax in MadWiFi */ +#define AR5K_TXQ_USEDEFAULT ((u32) -1) + +/* GENERIC CHIPSET DEFINITIONS */ + +/* MAC Chips */ +enum ath5k_version { + AR5K_AR5210 = 0, + AR5K_AR5211 = 1, + AR5K_AR5212 = 2, +}; + +/* PHY Chips */ +enum ath5k_radio { + AR5K_RF5110 = 0, + AR5K_RF5111 = 1, + AR5K_RF5112 = 2, + AR5K_RF2413 = 3, + AR5K_RF5413 = 4, + AR5K_RF2316 = 5, + AR5K_RF2317 = 6, + AR5K_RF2425 = 7, +}; + +/* + * Common silicon revision/version values + */ + +enum ath5k_srev_type { + AR5K_VERSION_MAC, + AR5K_VERSION_RAD, +}; + +struct ath5k_srev_name { + const char *sr_name; + enum ath5k_srev_type sr_type; + unsigned sr_val; +}; + +#define AR5K_SREV_UNKNOWN 0xffff + +#define AR5K_SREV_AR5210 0x00 /* Crete */ +#define AR5K_SREV_AR5311 0x10 /* Maui 1 */ +#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */ +#define AR5K_SREV_AR5311B 0x30 /* Spirit */ +#define AR5K_SREV_AR5211 0x40 /* Oahu */ +#define AR5K_SREV_AR5212 0x50 /* Venice */ +#define AR5K_SREV_AR5213 0x55 /* ??? */ +#define AR5K_SREV_AR5213A 0x59 /* Hainan */ +#define AR5K_SREV_AR2413 0x78 /* Griffin lite */ +#define AR5K_SREV_AR2414 0x70 /* Griffin */ +#define AR5K_SREV_AR5424 0x90 /* Condor */ +#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */ +#define AR5K_SREV_AR5414 0xa0 /* Eagle */ +#define AR5K_SREV_AR2415 0xb0 /* Talon */ +#define AR5K_SREV_AR5416 0xc0 /* PCI-E */ +#define AR5K_SREV_AR5418 0xca /* PCI-E */ +#define AR5K_SREV_AR2425 0xe0 /* Swan */ +#define AR5K_SREV_AR2417 0xf0 /* Nala */ + +#define AR5K_SREV_RAD_5110 0x00 +#define AR5K_SREV_RAD_5111 0x10 +#define AR5K_SREV_RAD_5111A 0x15 +#define AR5K_SREV_RAD_2111 0x20 +#define AR5K_SREV_RAD_5112 0x30 +#define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 +#define AR5K_SREV_RAD_2112 0x40 +#define AR5K_SREV_RAD_2112A 0x45 +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_2413 0x50 +#define AR5K_SREV_RAD_5413 0x60 +#define AR5K_SREV_RAD_2316 0x70 /* Cobra SoC */ +#define AR5K_SREV_RAD_2317 0x80 +#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */ +#define AR5K_SREV_RAD_2425 0xa2 +#define AR5K_SREV_RAD_5133 0xc0 + +#define AR5K_SREV_PHY_5211 0x30 +#define AR5K_SREV_PHY_5212 0x41 +#define AR5K_SREV_PHY_5212A 0x42 +#define AR5K_SREV_PHY_5212B 0x43 +#define AR5K_SREV_PHY_2413 0x45 +#define AR5K_SREV_PHY_5413 0x61 +#define AR5K_SREV_PHY_2425 0x70 + +/* + * Some of this information is based on Documentation from: + * + * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * + * Modulation for Atheros' eXtended Range - range enhancing extension that is + * supposed to double the distance an Atheros client device can keep a + * connection with an Atheros access point. This is achieved by increasing + * the receiver sensitivity up to, -105dBm, which is about 20dB above what + * the 802.11 specifications demand. In addition, new (proprietary) data rates + * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s. + * + * Please note that can you either use XR or TURBO but you cannot use both, + * they are exclusive. + * + */ +#define MODULATION_XR 0x00000200 + +/* + * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a + * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s + * signaling rate achieved through the bonding of two 54Mbit/s 802.11g + * channels. To use this feature your Access Point must also suport it. + * There is also a distinction between "static" and "dynamic" turbo modes: + * + * - Static: is the dumb version: devices set to this mode stick to it until + * the mode is turned off. + * - Dynamic: is the intelligent version, the network decides itself if it + * is ok to use turbo. As soon as traffic is detected on adjacent channels + * (which would get used in turbo mode), or when a non-turbo station joins + * the network, turbo mode won't be used until the situation changes again. + * Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which + * monitors the used radio band in order to decide whether turbo mode may + * be used or not. + * + * This article claims Super G sticks to bonding of channels 5 and 6 for + * USA: + * + * http://www.pcworld.com/article/id,113428-page,1/article.html + * + * The channel bonding seems to be driver specific though. In addition to + * deciding what channels will be used, these "Turbo" modes are accomplished + * by also enabling the following features: + * + * - Bursting: allows multiple frames to be sent at once, rather than pausing + * after each frame. Bursting is a standards-compliant feature that can be + * used with any Access Point. + * - Fast frames: increases the amount of information that can be sent per + * frame, also resulting in a reduction of transmission overhead. It is a + * proprietary feature that needs to be supported by the Access Point. + * - Compression: data frames are compressed in real time using a Lempel Ziv + * algorithm. This is done transparently. Once this feature is enabled, + * compression and decompression takes place inside the chipset, without + * putting additional load on the host CPU. + * + */ +#define MODULATION_TURBO 0x00000080 + +enum ath5k_driver_mode { + AR5K_MODE_11A = 0, + AR5K_MODE_11A_TURBO = 1, + AR5K_MODE_11B = 2, + AR5K_MODE_11G = 3, + AR5K_MODE_11G_TURBO = 4, + AR5K_MODE_XR = 5, +}; + +enum { + AR5K_MODE_BIT_11A = (1 << AR5K_MODE_11A), + AR5K_MODE_BIT_11A_TURBO = (1 << AR5K_MODE_11A_TURBO), + AR5K_MODE_BIT_11B = (1 << AR5K_MODE_11B), + AR5K_MODE_BIT_11G = (1 << AR5K_MODE_11G), + AR5K_MODE_BIT_11G_TURBO = (1 << AR5K_MODE_11G_TURBO), + AR5K_MODE_BIT_XR = (1 << AR5K_MODE_XR), +}; + +/****************\ + TX DEFINITIONS +\****************/ + +/* + * TX Status descriptor + */ +struct ath5k_tx_status { + u16 ts_seqnum; + u16 ts_tstamp; + u8 ts_status; + u8 ts_rate[4]; + u8 ts_retry[4]; + u8 ts_final_idx; + s8 ts_rssi; + u8 ts_shortretry; + u8 ts_longretry; + u8 ts_virtcol; + u8 ts_antenna; +} __attribute__ ((packed)); + +#define AR5K_TXSTAT_ALTRATE 0x80 +#define AR5K_TXERR_XRETRY 0x01 +#define AR5K_TXERR_FILT 0x02 +#define AR5K_TXERR_FIFO 0x04 + +/** + * enum ath5k_tx_queue - Queue types used to classify tx queues. + * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue + * @AR5K_TX_QUEUE_DATA: A normal data queue + * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue + * @AR5K_TX_QUEUE_BEACON: The beacon queue + * @AR5K_TX_QUEUE_CAB: The after-beacon queue + * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue + */ +enum ath5k_tx_queue { + AR5K_TX_QUEUE_INACTIVE = 0, + AR5K_TX_QUEUE_DATA, + AR5K_TX_QUEUE_XR_DATA, + AR5K_TX_QUEUE_BEACON, + AR5K_TX_QUEUE_CAB, + AR5K_TX_QUEUE_UAPSD, +}; + +/* + * Queue syb-types to classify normal data queues. + * These are the 4 Access Categories as defined in + * WME spec. 0 is the lowest priority and 4 is the + * highest. Normal data that hasn't been classified + * goes to the Best Effort AC. + */ +enum ath5k_tx_queue_subtype { + AR5K_WME_AC_BK = 0, /*Background traffic*/ + AR5K_WME_AC_BE, /*Best-effort (normal) traffic)*/ + AR5K_WME_AC_VI, /*Video traffic*/ + AR5K_WME_AC_VO, /*Voice traffic*/ +}; + +/* + * Queue ID numbers as returned by the hw functions, each number + * represents a hw queue. If hw does not support hw queues + * (eg 5210) all data goes in one queue. These match + * d80211 definitions (net80211/MadWiFi don't use them). + */ +enum ath5k_tx_queue_id { + AR5K_TX_QUEUE_ID_NOQCU_DATA = 0, + AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1, + AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/ + AR5K_TX_QUEUE_ID_DATA_MAX = 4, /*IEEE80211_TX_QUEUE_DATA4*/ + AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/ + AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/ + AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/ + AR5K_TX_QUEUE_ID_UAPSD = 8, + AR5K_TX_QUEUE_ID_XR_DATA = 9, +}; + +/* + * Flags to set hw queue's parameters... + */ +#define AR5K_TXQ_FLAG_TXOKINT_ENABLE 0x0001 /* Enable TXOK interrupt */ +#define AR5K_TXQ_FLAG_TXERRINT_ENABLE 0x0002 /* Enable TXERR interrupt */ +#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE 0x0004 /* Enable TXEOL interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE 0x0008 /* Enable TXDESC interrupt -not used- */ +#define AR5K_TXQ_FLAG_TXURNINT_ENABLE 0x0010 /* Enable TXURN interrupt */ +#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE 0x0020 /* Enable CBRORN interrupt */ +#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE 0x0040 /* Enable CBRURN interrupt */ +#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE 0x0080 /* Enable QTRIG interrupt */ +#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE 0x0100 /* Enable TXNOFRM interrupt */ +#define AR5K_TXQ_FLAG_BACKOFF_DISABLE 0x0200 /* Disable random post-backoff */ +#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300 /* Enable ready time expiry policy (?)*/ +#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800 /* Enable backoff while bursting */ +#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */ +#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/ + +/* + * A struct to hold tx queue's parameters + */ +struct ath5k_txq_info { + enum ath5k_tx_queue tqi_type; + enum ath5k_tx_queue_subtype tqi_subtype; + u16 tqi_flags; /* Tx queue flags (see above) */ + u32 tqi_aifs; /* Arbitrated Interframe Space */ + s32 tqi_cw_min; /* Minimum Contention Window */ + s32 tqi_cw_max; /* Maximum Contention Window */ + u32 tqi_cbr_period; /* Constant bit rate period */ + u32 tqi_cbr_overflow_limit; + u32 tqi_burst_time; + u32 tqi_ready_time; /* Not used */ +}; + +/* + * Transmit packet types. + * used on tx control descriptor + * TODO: Use them inside base.c corectly + */ +enum ath5k_pkt_type { + AR5K_PKT_TYPE_NORMAL = 0, + AR5K_PKT_TYPE_ATIM = 1, + AR5K_PKT_TYPE_PSPOLL = 2, + AR5K_PKT_TYPE_BEACON = 3, + AR5K_PKT_TYPE_PROBE_RESP = 4, + AR5K_PKT_TYPE_PIFS = 5, +}; + +/* + * TX power and TPC settings + */ +#define AR5K_TXPOWER_OFDM(_r, _v) ( \ + ((0 & 1) << ((_v) + 6)) | \ + (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ +) + +#define AR5K_TXPOWER_CCK(_r, _v) ( \ + (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ +) + +/* + * DMA size definitions (2^n+2) + */ +enum ath5k_dmasize { + AR5K_DMASIZE_4B = 0, + AR5K_DMASIZE_8B, + AR5K_DMASIZE_16B, + AR5K_DMASIZE_32B, + AR5K_DMASIZE_64B, + AR5K_DMASIZE_128B, + AR5K_DMASIZE_256B, + AR5K_DMASIZE_512B +}; + + +/****************\ + RX DEFINITIONS +\****************/ + +/* + * RX Status descriptor + */ +struct ath5k_rx_status { + u16 rs_datalen; + u16 rs_tstamp; + u8 rs_status; + u8 rs_phyerr; + s8 rs_rssi; + u8 rs_keyix; + u8 rs_rate; + u8 rs_antenna; + u8 rs_more; +}; + +#define AR5K_RXERR_CRC 0x01 +#define AR5K_RXERR_PHY 0x02 +#define AR5K_RXERR_FIFO 0x04 +#define AR5K_RXERR_DECRYPT 0x08 +#define AR5K_RXERR_MIC 0x10 +#define AR5K_RXKEYIX_INVALID ((u8) - 1) +#define AR5K_TXKEYIX_INVALID ((u32) - 1) + + +/* + * TSF to TU conversion: + * + * TSF is a 64bit value in usec (microseconds). + * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of + * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024). + */ +#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10) + + +/*******************************\ + GAIN OPTIMIZATION DEFINITIONS +\*******************************/ + +enum ath5k_rfgain { + AR5K_RFGAIN_INACTIVE = 0, + AR5K_RFGAIN_ACTIVE, + AR5K_RFGAIN_READ_REQUESTED, + AR5K_RFGAIN_NEED_CHANGE, +}; + +struct ath5k_gain { + u8 g_step_idx; + u8 g_current; + u8 g_target; + u8 g_low; + u8 g_high; + u8 g_f_corr; + u8 g_state; +}; + +/********************\ + COMMON DEFINITIONS +\********************/ + +#define AR5K_SLOT_TIME_9 396 +#define AR5K_SLOT_TIME_20 880 +#define AR5K_SLOT_TIME_MAX 0xffff + +/* channel_flags */ +#define CHANNEL_CW_INT 0x0008 /* Contention Window interference detected */ +#define CHANNEL_TURBO 0x0010 /* Turbo Channel */ +#define CHANNEL_CCK 0x0020 /* CCK channel */ +#define CHANNEL_OFDM 0x0040 /* OFDM channel */ +#define CHANNEL_2GHZ 0x0080 /* 2GHz channel. */ +#define CHANNEL_5GHZ 0x0100 /* 5GHz channel */ +#define CHANNEL_PASSIVE 0x0200 /* Only passive scan allowed */ +#define CHANNEL_DYN 0x0400 /* Dynamic CCK-OFDM channel (for g operation) */ +#define CHANNEL_XR 0x0800 /* XR channel */ + +#define CHANNEL_A (CHANNEL_5GHZ|CHANNEL_OFDM) +#define CHANNEL_B (CHANNEL_2GHZ|CHANNEL_CCK) +#define CHANNEL_G (CHANNEL_2GHZ|CHANNEL_OFDM) +#define CHANNEL_T (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_TG (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO) +#define CHANNEL_108A CHANNEL_T +#define CHANNEL_108G CHANNEL_TG +#define CHANNEL_X (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR) + +#define CHANNEL_ALL (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \ + CHANNEL_TURBO) + +#define CHANNEL_ALL_NOTURBO (CHANNEL_ALL & ~CHANNEL_TURBO) +#define CHANNEL_MODES CHANNEL_ALL + +/* + * Used internaly for reset_tx_queue). + * Also see struct struct net80211_channel. + */ +#define IS_CHAN_XR(_c) ((_c->hw_value & CHANNEL_XR) != 0) +#define IS_CHAN_B(_c) ((_c->hw_value & CHANNEL_B) != 0) + +/* + * The following structure is used to map 2GHz channels to + * 5GHz Atheros channels. + * TODO: Clean up + */ +struct ath5k_athchan_2ghz { + u32 a2_flags; + u16 a2_athchan; +}; + + +/******************\ + RATE DEFINITIONS +\******************/ + +/** + * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. + * + * The rate code is used to get the RX rate or set the TX rate on the + * hardware descriptors. It is also used for internal modulation control + * and settings. + * + * This is the hardware rate map we are aware of: + * + * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 + * rate_kbps 3000 1000 ? ? ? 2000 500 48000 + * + * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 + * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? + * + * rate_code 17 18 19 20 21 22 23 24 + * rate_kbps ? ? ? ? ? ? ? 11000 + * + * rate_code 25 26 27 28 29 30 31 32 + * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? + * + * "S" indicates CCK rates with short preamble. + * + * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the + * lowest 4 bits, so they are the same as below with a 0xF mask. + * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). + * We handle this in ath5k_setup_bands(). + */ +#define AR5K_MAX_RATES 32 + +/* B */ +#define ATH5K_RATE_CODE_1M 0x1B +#define ATH5K_RATE_CODE_2M 0x1A +#define ATH5K_RATE_CODE_5_5M 0x19 +#define ATH5K_RATE_CODE_11M 0x18 +/* A and G */ +#define ATH5K_RATE_CODE_6M 0x0B +#define ATH5K_RATE_CODE_9M 0x0F +#define ATH5K_RATE_CODE_12M 0x0A +#define ATH5K_RATE_CODE_18M 0x0E +#define ATH5K_RATE_CODE_24M 0x09 +#define ATH5K_RATE_CODE_36M 0x0D +#define ATH5K_RATE_CODE_48M 0x08 +#define ATH5K_RATE_CODE_54M 0x0C +/* XR */ +#define ATH5K_RATE_CODE_XR_500K 0x07 +#define ATH5K_RATE_CODE_XR_1M 0x02 +#define ATH5K_RATE_CODE_XR_2M 0x06 +#define ATH5K_RATE_CODE_XR_3M 0x01 + +/* adding this flag to rate_code enables short preamble */ +#define AR5K_SET_SHORT_PREAMBLE 0x04 + +/* + * Crypto definitions + */ + +#define AR5K_KEYCACHE_SIZE 8 + +/***********************\ + HW RELATED DEFINITIONS +\***********************/ + +/* + * Misc definitions + */ +#define AR5K_RSSI_EP_MULTIPLIER (1<<7) + +#define AR5K_ASSERT_ENTRY(_e, _s) do { \ + if (_e >= _s) \ + return 0; \ +} while (0) + +/* + * Hardware interrupt abstraction + */ + +/** + * enum ath5k_int - Hardware interrupt masks helpers + * + * @AR5K_INT_RX: mask to identify received frame interrupts, of type + * AR5K_ISR_RXOK or AR5K_ISR_RXERR + * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?) + * @AR5K_INT_RXNOFRM: No frame received (?) + * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The + * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's + * LinkPtr is NULL. For more details, refer to: + * http://www.freepatentsonline.com/20030225739.html + * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors). + * Note that Rx overrun is not always fatal, on some chips we can continue + * operation without reseting the card, that's why int_fatal is not + * common for all chips. + * @AR5K_INT_TX: mask to identify received frame interrupts, of type + * AR5K_ISR_TXOK or AR5K_ISR_TXERR + * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?) + * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold + * We currently do increments on interrupt by + * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2 + * @AR5K_INT_MIB: Indicates the Management Information Base counters should be + * checked. We should do this with ath5k_hw_update_mib_counters() but + * it seems we should also then do some noise immunity work. + * @AR5K_INT_RXPHY: RX PHY Error + * @AR5K_INT_RXKCM: RX Key cache miss + * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a + * beacon that must be handled in software. The alternative is if you + * have VEOL support, in that case you let the hardware deal with things. + * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing + * beacons from the AP have associated with, we should probably try to + * reassociate. When in IBSS mode this might mean we have not received + * any beacons from any local stations. Note that every station in an + * IBSS schedules to send beacons at the Target Beacon Transmission Time + * (TBTT) with a random backoff. + * @AR5K_INT_BNR: Beacon Not Ready interrupt - ?? + * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now + * until properly handled + * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA + * errors. These types of errors we can enable seem to be of type + * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR. + * @AR5K_INT_GLOBAL: Used to clear and set the IER + * @AR5K_INT_NOCARD: signals the card has been removed + * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same + * bit value + * + * These are mapped to take advantage of some common bits + * between the MACs, to be able to set intr properties + * easier. Some of them are not used yet inside hw.c. Most map + * to the respective hw interrupt value as they are common amogst different + * MACs. + */ +enum ath5k_int { + AR5K_INT_RXOK = 0x00000001, + AR5K_INT_RXDESC = 0x00000002, + AR5K_INT_RXERR = 0x00000004, + AR5K_INT_RXNOFRM = 0x00000008, + AR5K_INT_RXEOL = 0x00000010, + AR5K_INT_RXORN = 0x00000020, + AR5K_INT_TXOK = 0x00000040, + AR5K_INT_TXDESC = 0x00000080, + AR5K_INT_TXERR = 0x00000100, + AR5K_INT_TXNOFRM = 0x00000200, + AR5K_INT_TXEOL = 0x00000400, + AR5K_INT_TXURN = 0x00000800, + AR5K_INT_MIB = 0x00001000, + AR5K_INT_SWI = 0x00002000, + AR5K_INT_RXPHY = 0x00004000, + AR5K_INT_RXKCM = 0x00008000, + AR5K_INT_SWBA = 0x00010000, + AR5K_INT_BRSSI = 0x00020000, + AR5K_INT_BMISS = 0x00040000, + AR5K_INT_FATAL = 0x00080000, /* Non common */ + AR5K_INT_BNR = 0x00100000, /* Non common */ + AR5K_INT_TIM = 0x00200000, /* Non common */ + AR5K_INT_DTIM = 0x00400000, /* Non common */ + AR5K_INT_DTIM_SYNC = 0x00800000, /* Non common */ + AR5K_INT_GPIO = 0x01000000, + AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */ + AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */ + AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */ + AR5K_INT_QCBRORN = 0x10000000, /* Non common */ + AR5K_INT_QCBRURN = 0x20000000, /* Non common */ + AR5K_INT_QTRIG = 0x40000000, /* Non common */ + AR5K_INT_GLOBAL = 0x80000000, + + AR5K_INT_COMMON = AR5K_INT_RXOK + | AR5K_INT_RXDESC + | AR5K_INT_RXERR + | AR5K_INT_RXNOFRM + | AR5K_INT_RXEOL + | AR5K_INT_RXORN + | AR5K_INT_TXOK + | AR5K_INT_TXDESC + | AR5K_INT_TXERR + | AR5K_INT_TXNOFRM + | AR5K_INT_TXEOL + | AR5K_INT_TXURN + | AR5K_INT_MIB + | AR5K_INT_SWI + | AR5K_INT_RXPHY + | AR5K_INT_RXKCM + | AR5K_INT_SWBA + | AR5K_INT_BRSSI + | AR5K_INT_BMISS + | AR5K_INT_GPIO + | AR5K_INT_GLOBAL, + + AR5K_INT_NOCARD = 0xffffffff +}; + +/* + * Power management + */ +enum ath5k_power_mode { + AR5K_PM_UNDEFINED = 0, + AR5K_PM_AUTO, + AR5K_PM_AWAKE, + AR5K_PM_FULL_SLEEP, + AR5K_PM_NETWORK_SLEEP, +}; + +/* GPIO-controlled software LED */ +#define AR5K_SOFTLED_PIN 0 +#define AR5K_SOFTLED_ON 0 +#define AR5K_SOFTLED_OFF 1 + +/* + * Chipset capabilities -see ath5k_hw_get_capability- + * get_capability function is not yet fully implemented + * in ath5k so most of these don't work yet... + * TODO: Implement these & merge with _TUNE_ stuff above + */ +enum ath5k_capability_type { + AR5K_CAP_REG_DMN = 0, /* Used to get current reg. domain id */ + AR5K_CAP_TKIP_MIC = 2, /* Can handle TKIP MIC in hardware */ + AR5K_CAP_TKIP_SPLIT = 3, /* TKIP uses split keys */ + AR5K_CAP_PHYCOUNTERS = 4, /* PHY error counters */ + AR5K_CAP_DIVERSITY = 5, /* Supports fast diversity */ + AR5K_CAP_NUM_TXQUEUES = 6, /* Used to get max number of hw txqueues */ + AR5K_CAP_VEOL = 7, /* Supports virtual EOL */ + AR5K_CAP_COMPRESSION = 8, /* Supports compression */ + AR5K_CAP_BURST = 9, /* Supports packet bursting */ + AR5K_CAP_FASTFRAME = 10, /* Supports fast frames */ + AR5K_CAP_TXPOW = 11, /* Used to get global tx power limit */ + AR5K_CAP_TPC = 12, /* Can do per-packet tx power control (needed for 802.11a) */ + AR5K_CAP_BSSIDMASK = 13, /* Supports bssid mask */ + AR5K_CAP_MCAST_KEYSRCH = 14, /* Supports multicast key search */ + AR5K_CAP_TSF_ADJUST = 15, /* Supports beacon tsf adjust */ + AR5K_CAP_XR = 16, /* Supports XR mode */ + AR5K_CAP_WME_TKIPMIC = 17, /* Supports TKIP MIC when using WMM */ + AR5K_CAP_CHAN_HALFRATE = 18, /* Supports half rate channels */ + AR5K_CAP_CHAN_QUARTERRATE = 19, /* Supports quarter rate channels */ + AR5K_CAP_RFSILENT = 20, /* Supports RFsilent */ +}; + + +/* XXX: we *may* move cap_range stuff to struct wiphy */ +struct ath5k_capabilities { + /* + * Supported PHY modes + * (ie. CHANNEL_A, CHANNEL_B, ...) + */ + u16 cap_mode; + + /* + * Frequency range (without regulation restrictions) + */ + struct { + u16 range_2ghz_min; + u16 range_2ghz_max; + u16 range_5ghz_min; + u16 range_5ghz_max; + } cap_range; + + /* + * Values stored in the EEPROM (some of them...) + */ + struct ath5k_eeprom_info cap_eeprom; + + /* + * Queue information + */ + struct { + u8 q_tx_num; + } cap_queues; +}; + + +/***************************************\ + HARDWARE ABSTRACTION LAYER STRUCTURE +\***************************************/ + +/* + * Misc defines + */ + +#define AR5K_MAX_GPIO 10 +#define AR5K_MAX_RF_BANKS 8 + +/* TODO: Clean up and merge with ath5k_softc */ +struct ath5k_hw { + struct ath5k_softc *ah_sc; + void *ah_iobase; + + enum ath5k_int ah_imr; + int ah_ier; + + struct net80211_channel *ah_current_channel; + int ah_turbo; + int ah_calibration; + int ah_running; + int ah_single_chip; + int ah_combined_mic; + + u32 ah_mac_srev; + u16 ah_mac_version; + u16 ah_mac_revision; + u16 ah_phy_revision; + u16 ah_radio_5ghz_revision; + u16 ah_radio_2ghz_revision; + + enum ath5k_version ah_version; + enum ath5k_radio ah_radio; + u32 ah_phy; + + int ah_5ghz; + int ah_2ghz; + +#define ah_regdomain ah_capabilities.cap_regdomain.reg_current +#define ah_regdomain_hw ah_capabilities.cap_regdomain.reg_hw +#define ah_modes ah_capabilities.cap_mode +#define ah_ee_version ah_capabilities.cap_eeprom.ee_version + + u32 ah_atim_window; + u32 ah_aifs; + u32 ah_cw_min; + u32 ah_cw_max; + int ah_software_retry; + u32 ah_limit_tx_retries; + + u32 ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; + int ah_ant_diversity; + + u8 ah_sta_id[ETH_ALEN]; + + /* Current BSSID we are trying to assoc to / create. + * This is passed by mac80211 on config_interface() and cached here for + * use in resets */ + u8 ah_bssid[ETH_ALEN]; + u8 ah_bssid_mask[ETH_ALEN]; + + u32 ah_gpio[AR5K_MAX_GPIO]; + int ah_gpio_npins; + + struct ath5k_capabilities ah_capabilities; + + struct ath5k_txq_info ah_txq; + u32 ah_txq_status; + u32 ah_txq_imr_txok; + u32 ah_txq_imr_txerr; + u32 ah_txq_imr_txurn; + u32 ah_txq_imr_txdesc; + u32 ah_txq_imr_txeol; + u32 ah_txq_imr_cbrorn; + u32 ah_txq_imr_cbrurn; + u32 ah_txq_imr_qtrig; + u32 ah_txq_imr_nofrm; + u32 ah_txq_isr; + u32 *ah_rf_banks; + size_t ah_rf_banks_size; + size_t ah_rf_regs_count; + struct ath5k_gain ah_gain; + u8 ah_offset[AR5K_MAX_RF_BANKS]; + + + struct { + /* Temporary tables used for interpolation */ + u8 tmpL[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 tmpR[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; + u16 txp_rates_power_table[AR5K_MAX_RATES]; + u8 txp_min_idx; + int txp_tpc; + /* Values in 0.25dB units */ + s16 txp_min_pwr; + s16 txp_max_pwr; + s16 txp_offset; + s16 txp_ofdm; + /* Values in dB units */ + s16 txp_cck_ofdm_pwr_delta; + s16 txp_cck_ofdm_gainf_delta; + } ah_txpower; + + /* noise floor from last periodic calibration */ + s32 ah_noise_floor; + + /* + * Function pointers + */ + int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc, + u32 size, unsigned int flags); + int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int, + unsigned int, unsigned int, unsigned int, unsigned int, + unsigned int, unsigned int, unsigned int); + int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_tx_status *); + int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *, + struct ath5k_rx_status *); +}; + +/* + * Prototypes + */ + +extern int ath5k_bitrate_to_hw_rix(int bitrate); + +/* Attach/Detach Functions */ +extern int ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version, struct ath5k_hw **ah); +extern void ath5k_hw_detach(struct ath5k_hw *ah); + +/* LED functions */ +extern int ath5k_init_leds(struct ath5k_softc *sc); +extern void ath5k_led_enable(struct ath5k_softc *sc); +extern void ath5k_led_off(struct ath5k_softc *sc); +extern void ath5k_unregister_leds(struct ath5k_softc *sc); + +/* Reset Functions */ +extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, int initial); +extern int ath5k_hw_reset(struct ath5k_hw *ah, struct net80211_channel *channel, int change_channel); +/* Power management functions */ +extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, int set_chip, u16 sleep_duration); + +/* DMA Related Functions */ +extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah); +extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah); +extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah); +extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr); +extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue); +extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue); +extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, + u32 phys_addr); +extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, int increase); +/* Interrupt handling */ +extern int ath5k_hw_is_intr_pending(struct ath5k_hw *ah); +extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask); +extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask); + +/* EEPROM access functions */ +extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern void ath5k_eeprom_detach(struct ath5k_hw *ah); +extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); +extern int ath5k_eeprom_is_hb63(struct ath5k_hw *ah); + +/* Protocol Control Unit Functions */ +extern int ath5k_hw_set_opmode(struct ath5k_hw *ah); +/* BSSID Functions */ +extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac); +extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac); +extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id); +extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask); +/* Receive start/stop functions */ +extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah); +extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah); +/* RX Filter functions */ +extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1); +extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah); +extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter); +/* ACK bit rate */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, int high); +/* ACK/CTS Timeouts */ +extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah); +extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout); +extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah); +/* Key table (WEP) functions */ +extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry); + +/* Queue Control Unit, DFS Control Unit Functions */ +extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, const struct ath5k_txq_info *queue_info); +extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, + enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info); +extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah); +extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah); +extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah); +extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time); + +/* Hardware Descriptor Functions */ +extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah); + +/* GPIO Functions */ +extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio); +extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio); +extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val); +extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level); + +/* rfkill Functions */ +extern void ath5k_rfkill_hw_start(struct ath5k_hw *ah); +extern void ath5k_rfkill_hw_stop(struct ath5k_hw *ah); + +/* Misc functions */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah); +extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result); +extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id); +extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah); + +/* Initial register settings functions */ +extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, int change_channel); + +/* Initialize RF */ +extern int ath5k_hw_rfregs_init(struct ath5k_hw *ah, + struct net80211_channel *channel, + unsigned int mode); +extern int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq); +extern enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah); +extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah); +/* PHY/RF channel functions */ +extern int ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags); +extern int ath5k_hw_channel(struct ath5k_hw *ah, struct net80211_channel *channel); +/* PHY calibration */ +extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct net80211_channel *channel); +extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq); +/* Misc PHY functions */ +extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan); +extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); +extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); +extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); +/* TX power setup */ +extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct net80211_channel *channel, u8 ee_mode, u8 txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); + +/* + * Functions used internaly + */ + +/* + * Translate usec to hw clock units + * TODO: Half/quarter rate + */ +static inline unsigned int ath5k_hw_htoclock(unsigned int usec, int turbo) +{ + return turbo ? (usec * 80) : (usec * 40); +} + +/* + * Translate hw clock units to usec + * TODO: Half/quarter rate + */ +static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, int turbo) +{ + return turbo ? (clock / 80) : (clock / 40); +} + +/* + * Read from a register + */ +static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg) +{ + return readl(ah->ah_iobase + reg); +} + +/* + * Write to a register + */ +static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg) +{ + writel(val, ah->ah_iobase + reg); +} + +#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY) +/* + * Check if a register write has been completed + */ +static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, + u32 val, int is_set) +{ + int i; + u32 data; + + for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) { + data = ath5k_hw_reg_read(ah, reg); + if (is_set && (data & flag)) + break; + else if ((data & flag) == val) + break; + udelay(15); + } + + return (i <= 0) ? -EAGAIN : 0; +} + +/* + * Convert channel frequency to channel number + */ +static inline int ath5k_freq_to_channel(int freq) +{ + if (freq == 2484) + return 14; + + if (freq < 2484) + return (freq - 2407) / 5; + + return freq/5 - 1000; +} + +#endif + +static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits) +{ + u32 retval = 0, bit, i; + + for (i = 0; i < bits; i++) { + bit = (val >> i) & 1; + retval = (retval << 1) | bit; + } + + return retval; +} + +#endif diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_attach.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_attach.c new file mode 100644 index 000000000..302536dbd --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_attach.c @@ -0,0 +1,340 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net> + * Original from Linux kernel 2.6.30. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/*************************************\ +* Attach/Detach Functions and helpers * +\*************************************/ + +#include <ipxe/pci.h> +#include <unistd.h> +#include <stdlib.h> +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/** + * ath5k_hw_post - Power On Self Test helper function + * + * @ah: The &struct ath5k_hw + */ +static int ath5k_hw_post(struct ath5k_hw *ah) +{ + + static const u32 static_pattern[4] = { + 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999 + }; + static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) }; + int i, c; + u16 cur_reg; + u32 var_pattern; + u32 init_val; + u32 cur_val; + + for (c = 0; c < 2; c++) { + + cur_reg = regs[c]; + + /* Save previous value */ + init_val = ath5k_hw_reg_read(ah, cur_reg); + + for (i = 0; i < 256; i++) { + var_pattern = i << 16 | i; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + DBG("ath5k: POST failed!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x0039080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + for (i = 0; i < 4; i++) { + var_pattern = static_pattern[i]; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + cur_val = ath5k_hw_reg_read(ah, cur_reg); + + if (cur_val != var_pattern) { + DBG("ath5k: POST failed!\n"); + return -EAGAIN; + } + + /* Found on ndiswrapper dumps */ + var_pattern = 0x003b080f; + ath5k_hw_reg_write(ah, var_pattern, cur_reg); + } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + + } + + return 0; + +} + +/** + * ath5k_hw_attach - Check if hw is supported and init the needed structs + * + * @sc: The &struct ath5k_softc we got from the driver's attach function + * @mac_version: The mac version id (check out ath5k.h) based on pci id + * @hw: Returned newly allocated hardware structure, on success + * + * Check if the device is supported, perform a POST and initialize the needed + * structs. Returns -ENOMEM if we don't have memory for the needed structs, + * -ENODEV if the device is not supported or prints an error msg if something + * else went wrong. + */ +int ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version, + struct ath5k_hw **hw) +{ + struct ath5k_hw *ah; + struct pci_device *pdev = sc->pdev; + int ret; + u32 srev; + + ah = zalloc(sizeof(struct ath5k_hw)); + if (ah == NULL) { + ret = -ENOMEM; + DBG("ath5k: out of memory\n"); + goto err; + } + + ah->ah_sc = sc; + ah->ah_iobase = sc->iobase; + + /* + * HW information + */ + ah->ah_turbo = 0; + ah->ah_txpower.txp_tpc = 0; + ah->ah_imr = 0; + ah->ah_atim_window = 0; + ah->ah_aifs = AR5K_TUNE_AIFS; + ah->ah_cw_min = AR5K_TUNE_CWMIN; + ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY; + ah->ah_software_retry = 0; + ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY; + + /* + * Set the mac version based on the pci id + */ + ah->ah_version = mac_version; + + /*Fill the ath5k_hw struct with the needed functions*/ + ret = ath5k_hw_init_desc_functions(ah); + if (ret) + goto err_free; + + /* Bring device out of sleep and reset it's units */ + ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, 1); + if (ret) + goto err_free; + + /* Get MAC, PHY and RADIO revisions */ + srev = ath5k_hw_reg_read(ah, AR5K_SREV); + ah->ah_mac_srev = srev; + ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER); + ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV); + ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID); + ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah, CHANNEL_5GHZ); + ah->ah_phy = AR5K_PHY(0); + + /* Try to identify radio chip based on it's srev */ + switch (ah->ah_radio_5ghz_revision & 0xf0) { + case AR5K_SREV_RAD_5111: + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = 0; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + break; + case AR5K_SREV_RAD_5112: + case AR5K_SREV_RAD_2112: + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = 0; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + break; + case AR5K_SREV_RAD_2413: + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = 1; + break; + case AR5K_SREV_RAD_5413: + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = 1; + break; + case AR5K_SREV_RAD_2316: + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = 1; + break; + case AR5K_SREV_RAD_2317: + ah->ah_radio = AR5K_RF2317; + ah->ah_single_chip = 1; + break; + case AR5K_SREV_RAD_5424: + if (ah->ah_mac_version == AR5K_SREV_AR2425 || + ah->ah_mac_version == AR5K_SREV_AR2417) { + ah->ah_radio = AR5K_RF2425; + } else { + ah->ah_radio = AR5K_RF5413; + } + ah->ah_single_chip = 1; + break; + default: + /* Identify radio based on mac/phy srev */ + if (ah->ah_version == AR5K_AR5210) { + ah->ah_radio = AR5K_RF5110; + ah->ah_single_chip = 0; + } else if (ah->ah_version == AR5K_AR5211) { + ah->ah_radio = AR5K_RF5111; + ah->ah_single_chip = 0; + ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah, + CHANNEL_2GHZ); + } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) || + ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_single_chip = 1; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425; + } else if (srev == AR5K_SREV_AR5213A && + ah->ah_phy_revision == AR5K_SREV_PHY_5212B) { + ah->ah_radio = AR5K_RF5112; + ah->ah_single_chip = 0; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5112B; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) { + ah->ah_radio = AR5K_RF2316; + ah->ah_single_chip = 1; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316; + } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_5413) { + ah->ah_radio = AR5K_RF5413; + ah->ah_single_chip = 1; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413; + } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) || + ah->ah_phy_revision == AR5K_SREV_PHY_2413) { + ah->ah_radio = AR5K_RF2413; + ah->ah_single_chip = 1; + ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413; + } else { + DBG("ath5k: Couldn't identify radio revision.\n"); + ret = -ENOTSUP; + goto err_free; + } + } + + /* Return on unsuported chips (unsupported eeprom etc) */ + if ((srev >= AR5K_SREV_AR5416) && + (srev < AR5K_SREV_AR2425)) { + DBG("ath5k: Device not yet supported.\n"); + ret = -ENOTSUP; + goto err_free; + } + + /* + * Write PCI-E power save settings + */ + if ((ah->ah_version == AR5K_AR5212) && + pci_find_capability(pdev, PCI_CAP_ID_EXP)) { + ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES); + /* Shut off RX when elecidle is asserted */ + ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES); + /* TODO: EEPROM work */ + ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES); + /* Shut off PLL and CLKREQ active in L1 */ + ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES); + /* Preserce other settings */ + ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES); + ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES); + /* Reset SERDES to load new settings */ + ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET); + mdelay(1); + } + + /* + * POST + */ + ret = ath5k_hw_post(ah); + if (ret) + goto err_free; + + /* Enable pci core retry fix on Hainan (5213A) and later chips */ + if (srev >= AR5K_SREV_AR5213A) + ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG); + + /* + * Get card capabilities, calibration values etc + * TODO: EEPROM work + */ + ret = ath5k_eeprom_init(ah); + if (ret) { + DBG("ath5k: unable to init EEPROM\n"); + goto err_free; + } + + /* Get misc capabilities */ + ret = ath5k_hw_set_capabilities(ah); + if (ret) { + DBG("ath5k: unable to get device capabilities: 0x%04x\n", + sc->pdev->device); + goto err_free; + } + + if (srev >= AR5K_SREV_AR2414) { + ah->ah_combined_mic = 1; + AR5K_REG_ENABLE_BITS(ah, AR5K_MISC_MODE, + AR5K_MISC_MODE_COMBINED_MIC); + } + + /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */ + memset(ah->ah_bssid, 0xff, ETH_ALEN); + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + ath5k_hw_set_opmode(ah); + + ath5k_hw_rfgain_opt_init(ah); + + *hw = ah; + return 0; +err_free: + free(ah); +err: + return ret; +} + +/** + * ath5k_hw_detach - Free the ath5k_hw struct + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_detach(struct ath5k_hw *ah) +{ + free(ah->ah_rf_banks); + ath5k_eeprom_detach(ah); + free(ah); +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_caps.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_caps.c new file mode 100644 index 000000000..9c00d15d7 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_caps.c @@ -0,0 +1,154 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/**************\ +* Capabilities * +\**************/ + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * Fill the capabilities struct + * TODO: Merge this with EEPROM code when we are done with it + */ +int ath5k_hw_set_capabilities(struct ath5k_hw *ah) +{ + u16 ee_header; + + /* Capabilities stored in the EEPROM */ + ee_header = ah->ah_capabilities.cap_eeprom.ee_header; + + if (ah->ah_version == AR5K_AR5210) { + /* + * Set radio capabilities + * (The AR5110 only supports the middle 5GHz band) + */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5120; + ah->ah_capabilities.cap_range.range_5ghz_max = 5430; + ah->ah_capabilities.cap_range.range_2ghz_min = 0; + ah->ah_capabilities.cap_range.range_2ghz_max = 0; + + /* Set supported modes */ + ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A; + ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A_TURBO; + } else { + /* + * XXX The tranceiver supports frequencies from 4920 to 6100GHz + * XXX and from 2312 to 2732GHz. There are problems with the + * XXX current ieee80211 implementation because the IEEE + * XXX channel mapping does not support negative channel + * XXX numbers (2312MHz is channel -19). Of course, this + * XXX doesn't matter because these channels are out of range + * XXX but some regulation domains like MKK (Japan) will + * XXX support frequencies somewhere around 4.8GHz. + */ + + /* + * Set radio capabilities + */ + + if (AR5K_EEPROM_HDR_11A(ee_header)) { + /* 4920 */ + ah->ah_capabilities.cap_range.range_5ghz_min = 5005; + ah->ah_capabilities.cap_range.range_5ghz_max = 6100; + + /* Set supported modes */ + ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A; + ah->ah_capabilities.cap_mode |= AR5K_MODE_BIT_11A_TURBO; + if (ah->ah_version == AR5K_AR5212) + ah->ah_capabilities.cap_mode |= + AR5K_MODE_BIT_11G_TURBO; + } + + /* Enable 802.11b if a 2GHz capable radio (2111/5112) is + * connected */ + if (AR5K_EEPROM_HDR_11B(ee_header) || + (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211)) { + /* 2312 */ + ah->ah_capabilities.cap_range.range_2ghz_min = 2412; + ah->ah_capabilities.cap_range.range_2ghz_max = 2732; + + if (AR5K_EEPROM_HDR_11B(ee_header)) + ah->ah_capabilities.cap_mode |= + AR5K_MODE_BIT_11B; + + if (AR5K_EEPROM_HDR_11G(ee_header) && + ah->ah_version != AR5K_AR5211) + ah->ah_capabilities.cap_mode |= + AR5K_MODE_BIT_11G; + } + } + + /* GPIO */ + ah->ah_gpio_npins = AR5K_NUM_GPIO; + + /* Set number of supported TX queues */ + ah->ah_capabilities.cap_queues.q_tx_num = 1; + + return 0; +} + +/* Main function used by the driver part to check caps */ +int ath5k_hw_get_capability(struct ath5k_hw *ah, + enum ath5k_capability_type cap_type, + u32 capability __unused, u32 *result) +{ + switch (cap_type) { + case AR5K_CAP_NUM_TXQUEUES: + if (result) { + *result = 1; + goto yes; + } + case AR5K_CAP_VEOL: + goto yes; + case AR5K_CAP_COMPRESSION: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_BURST: + goto yes; + case AR5K_CAP_TPC: + goto yes; + case AR5K_CAP_BSSIDMASK: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + case AR5K_CAP_XR: + if (ah->ah_version == AR5K_AR5212) + goto yes; + else + goto no; + default: + goto no; + } + +no: + return -EINVAL; +yes: + return 0; +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_desc.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_desc.c new file mode 100644 index 000000000..30fe1c777 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_desc.c @@ -0,0 +1,544 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/******************************\ + Hardware Descriptor Functions +\******************************/ + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * TX Descriptors + */ + +#define FCS_LEN 4 + +/* + * Initialize the 2-word tx control descriptor on 5210/5211 + */ +static int +ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, + unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type, + unsigned int tx_power __unused, unsigned int tx_rate0, unsigned int tx_tries0, + unsigned int key_index __unused, unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate __unused, unsigned int rtscts_duration) +{ + u32 frame_type; + struct ath5k_hw_2w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (tx_tries0 == 0) { + DBG("ath5k: zero retries\n"); + return -EINVAL; + } + if (tx_rate0 == 0) { + DBG("ath5k: zero rate\n"); + return -EINVAL; + } + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + frame_len = pkt_len + FCS_LEN; + + if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN; + + /* + * Verify and set header length + * XXX: I only found that on 5210 code, does it work on 5211 ? + */ + if (ah->ah_version == AR5K_AR5210) { + if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN) + return -EINVAL; + tx_ctl->tx_control_0 |= + AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN); + } + + /*Diferences between 5210-5211*/ + if (ah->ah_version == AR5K_AR5210) { + switch (type) { + case AR5K_PKT_TYPE_BEACON: + case AR5K_PKT_TYPE_PROBE_RESP: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + case AR5K_PKT_TYPE_PIFS: + frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + default: + frame_type = type /*<< 2 ?*/; + } + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) | + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + + } else { + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) | + AR5K_REG_SM(antenna_mode, + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= + AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE); + } +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_2W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * RTS/CTS Duration [5210 ?] + */ + if ((ah->ah_version == AR5K_AR5210) && + (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA))) + tx_ctl->tx_control_1 |= rtscts_duration & + AR5K_2W_TX_DESC_CTL1_RTS_DURATION; + + return 0; +} + +/* + * Initialize the 4-word tx control descriptor on 5212 + */ +static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, + struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len __unused, + enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0, + unsigned int tx_tries0, unsigned int key_index __unused, + unsigned int antenna_mode, unsigned int flags, + unsigned int rtscts_rate, + unsigned int rtscts_duration) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + unsigned int frame_len; + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + + /* + * Validate input + * - Zero retries don't make sense. + * - A zero rate will put the HW into a mode where it continously sends + * noise on the channel, so it is important to avoid this. + */ + if (tx_tries0 == 0) { + DBG("ath5k: zero retries\n"); + return -EINVAL; + } + if (tx_rate0 == 0) { + DBG("ath5k: zero rate\n"); + return -EINVAL; + } + + tx_power += ah->ah_txpower.txp_offset; + if (tx_power > AR5K_TUNE_MAX_TXPOWER) + tx_power = AR5K_TUNE_MAX_TXPOWER; + + /* Clear descriptor */ + memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); + + /* Setup control descriptor */ + + /* Verify and set frame length */ + + frame_len = pkt_len + FCS_LEN; + + if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN) + return -EINVAL; + + tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN; + + /* Verify and set buffer length */ + + if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN) + return -EINVAL; + + tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN; + + tx_ctl->tx_control_0 |= + AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) | + AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT); + tx_ctl->tx_control_1 |= AR5K_REG_SM(type, + AR5K_4W_TX_DESC_CTL1_FRAME_TYPE); + tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES, + AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0); + tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + +#define _TX_FLAGS(_c, _flag) \ + if (flags & AR5K_TXDESC_##_flag) { \ + tx_ctl->tx_control_##_c |= \ + AR5K_4W_TX_DESC_CTL##_c##_##_flag; \ + } + + _TX_FLAGS(0, CLRDMASK); + _TX_FLAGS(0, VEOL); + _TX_FLAGS(0, INTREQ); + _TX_FLAGS(0, RTSENA); + _TX_FLAGS(0, CTSENA); + _TX_FLAGS(1, NOACK); + +#undef _TX_FLAGS + + /* + * RTS/CTS + */ + if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) { + if ((flags & AR5K_TXDESC_RTSENA) && + (flags & AR5K_TXDESC_CTSENA)) + return -EINVAL; + tx_ctl->tx_control_2 |= rtscts_duration & + AR5K_4W_TX_DESC_CTL2_RTS_DURATION; + tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate, + AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE); + } + + return 0; +} + +/* + * Proccess the tx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah __unused, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_2w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + tx_ctl = &desc->ud.ds_tx5210.tx_ctl; + tx_status = &desc->ud.ds_tx5210.tx_stat; + + /* No frame has been send or error */ + if ((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + /*TODO: ts->ts_virtcol + test*/ + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = 1; + ts->ts_status = 0; + ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0, + AR5K_2W_TX_DESC_CTL0_XMIT_RATE); + ts->ts_retry[0] = ts->ts_longretry; + ts->ts_final_idx = 0; + + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * Proccess a tx status descriptor on 5212 + */ +static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah __unused, + struct ath5k_desc *desc, struct ath5k_tx_status *ts) +{ + struct ath5k_hw_4w_tx_ctl *tx_ctl; + struct ath5k_hw_tx_status *tx_status; + + tx_ctl = &desc->ud.ds_tx5212.tx_ctl; + tx_status = &desc->ud.ds_tx5212.tx_stat; + + /* No frame has been send or error */ + if (!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)) + return -EINPROGRESS; + + /* + * Get descriptor status + */ + ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP); + ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT); + ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0, + AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT); + ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_SEQ_NUM); + ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH); + ts->ts_antenna = (tx_status->tx_status_1 & + AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1; + ts->ts_status = 0; + + ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1, + AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX); + + ts->ts_retry[0] = ts->ts_longretry; + ts->ts_rate[0] = tx_ctl->tx_control_3 & + AR5K_4W_TX_DESC_CTL3_XMIT_RATE0; + + /* TX error */ + if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) { + if (tx_status->tx_status_0 & + AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES) + ts->ts_status |= AR5K_TXERR_XRETRY; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN) + ts->ts_status |= AR5K_TXERR_FIFO; + + if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED) + ts->ts_status |= AR5K_TXERR_FILT; + } + + return 0; +} + +/* + * RX Descriptors + */ + +/* + * Initialize an rx control descriptor + */ +static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah __unused, + struct ath5k_desc *desc, + u32 size, unsigned int flags) +{ + struct ath5k_hw_rx_ctl *rx_ctl; + + rx_ctl = &desc->ud.ds_rx.rx_ctl; + + /* + * Clear the descriptor + * If we don't clean the status descriptor, + * while scanning we get too many results, + * most of them virtual, after some secs + * of scanning system hangs. M.F. + */ + memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc)); + + /* Setup descriptor */ + rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN; + if (rx_ctl->rx_control_1 != size) + return -EINVAL; + + if (flags & AR5K_RXDESC_INTREQ) + rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ; + + return 0; +} + +/* + * Proccess the rx status descriptor on 5210/5211 + */ +static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah __unused, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* No frame received / not ready */ + if (!(rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE)) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5210_RX_DESC_STATUS0_MORE); + /* TODO: this timestamp is 13 bit, later on we assume 15 bit */ + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN) + rs->rs_status |= AR5K_RXERR_FIFO; + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5210_RX_DESC_STATUS1_PHY_ERROR); + } + + if (rx_status->rx_status_1 & + AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + } + + return 0; +} + +/* + * Proccess the rx status descriptor on 5212 + */ +static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah __unused, + struct ath5k_desc *desc, struct ath5k_rx_status *rs) +{ + struct ath5k_hw_rx_status *rx_status; + struct ath5k_hw_rx_error *rx_err; + + rx_status = &desc->ud.ds_rx.u.rx_stat; + + /* Overlay on error */ + rx_err = &desc->ud.ds_rx.u.rx_err; + + /* No frame received / not ready */ + if (!(rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE)) + return -EINPROGRESS; + + /* + * Frame receive status + */ + rs->rs_datalen = rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_DATA_LEN; + rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL); + rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE); + rs->rs_antenna = AR5K_REG_MS(rx_status->rx_status_0, + AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA); + rs->rs_more = !!(rx_status->rx_status_0 & + AR5K_5212_RX_DESC_STATUS0_MORE); + rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1, + AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP); + rs->rs_status = 0; + rs->rs_phyerr = 0; + rs->rs_keyix = AR5K_RXKEYIX_INVALID; + + /* + * Receive/descriptor errors + */ + if (!(rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) { + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_CRC; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) { + rs->rs_status |= AR5K_RXERR_PHY; + rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1, + AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE); + } + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR) + rs->rs_status |= AR5K_RXERR_DECRYPT; + + if (rx_status->rx_status_1 & + AR5K_5212_RX_DESC_STATUS1_MIC_ERROR) + rs->rs_status |= AR5K_RXERR_MIC; + } + + return 0; +} + +/* + * Init function pointers inside ath5k_hw struct + */ +int ath5k_hw_init_desc_functions(struct ath5k_hw *ah) +{ + + if (ah->ah_version != AR5K_AR5210 && + ah->ah_version != AR5K_AR5211 && + ah->ah_version != AR5K_AR5212) + return -ENOTSUP; + + if (ah->ah_version == AR5K_AR5212) { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status; + } else { + ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc; + ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc; + ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status; + } + + if (ah->ah_version == AR5K_AR5212) + ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status; + else if (ah->ah_version <= AR5K_AR5211) + ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status; + + return 0; +} + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_dma.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_dma.c new file mode 100644 index 000000000..fa1e0d013 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_dma.c @@ -0,0 +1,631 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/*************************************\ +* DMA and interrupt masking functions * +\*************************************/ + +/* + * dma.c - DMA and interrupt masking functions + * + * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and + * handle queue setup for 5210 chipset (rest are handled on qcu.c). + * Also we setup interrupt mask register (IMR) and read the various iterrupt + * status registers (ISR). + * + * TODO: Handle SISR on 5211+ and introduce a function to return the queue + * number that resulted the interrupt. + */ + +#include <unistd.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/*********\ +* Receive * +\*********/ + +/** + * ath5k_hw_start_rx_dma - Start DMA receive + * + * @ah: The &struct ath5k_hw + */ +void ath5k_hw_start_rx_dma(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); +} + +/** + * ath5k_hw_stop_rx_dma - Stop DMA receive + * + * @ah: The &struct ath5k_hw + */ +int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah) +{ + unsigned int i; + + ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR); + + /* + * It may take some time to disable the DMA receive unit + */ + for (i = 1000; i > 0 && + (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0; + i--) + udelay(10); + + return i ? 0 : -EBUSY; +} + +/** + * ath5k_hw_get_rxdp - Get RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * + * XXX: Is RXDP read and clear ? + */ +u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_RXDP); +} + +/** + * ath5k_hw_set_rxdp - Set RX Descriptor's address + * + * @ah: The &struct ath5k_hw + * @phys_addr: RX descriptor address + * + * XXX: Should we check if rx is enabled before setting rxdp ? + */ +void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr) +{ + ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP); +} + + +/**********\ +* Transmit * +\**********/ + +/** + * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Start DMA transmit for a specific queue and since 5210 doesn't have + * QCU/DCU, set up queue parameters for 5210 here based on queue type (one + * queue for normal data and one queue for beacons). For queue setup + * on newer chips check out qcu.c. Returns -EINVAL if queue number is out + * of range or if queue is already disabled. + * + * NOTE: Must be called after setting up tx control descriptor for that + * queue (see below). + */ +int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + u32 tx_queue; + + /* Return if queue is declared inactive */ + if (ah->ah_txq.tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* Assume always a data queue */ + tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0; + + /* Start queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* Return if queue is disabled */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) + return -EIO; + + /* Start queue */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue); + } + + return 0; +} + +/** + * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Stop DMA transmit on a specific hw queue and drain queue so we don't + * have any pending frames. Returns -EBUSY if we still have pending frames, + * -EINVAL if queue number is out of range. + * + */ +int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) +{ + unsigned int i = 40; + u32 tx_queue, pending; + + /* Return if queue is declared inactive */ + if (ah->ah_txq.tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + if (ah->ah_version == AR5K_AR5210) { + tx_queue = ath5k_hw_reg_read(ah, AR5K_CR); + + /* Assume a data queue */ + tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0; + + /* Stop queue */ + ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); + } else { + /* + * Schedule TX disable and wait until queue is empty + */ + AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue); + + /*Check for pending frames*/ + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + /* For 2413+ order PCU to drop packets using + * QUIET mechanism */ + if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) && pending) { + /* Set periodicity and duration */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)| + AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR), + AR5K_QUIET_CTL2); + + /* Enable quiet period for current TSF */ + ath5k_hw_reg_write(ah, + AR5K_QUIET_CTL1_QT_EN | + AR5K_REG_SM(ath5k_hw_reg_read(ah, + AR5K_TSF_L32_5211) >> 10, + AR5K_QUIET_CTL1_NEXT_QT_TSF), + AR5K_QUIET_CTL1); + + /* Force channel idle high */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + + /* Wait a while and disable mechanism */ + udelay(200); + AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1, + AR5K_QUIET_CTL1_QT_EN); + + /* Re-check for pending frames */ + i = 40; + do { + pending = ath5k_hw_reg_read(ah, + AR5K_QUEUE_STATUS(queue)) & + AR5K_QCU_STS_FRMPENDCNT; + udelay(100); + } while (--i && pending); + + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_CHANEL_IDLE_HIGH); + } + + /* Clear register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; + } + + /* TODO: Check for success on 5210 else return error */ + return 0; +} + +/** + * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Get TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and use tx queue type since we only have 2 queues. + * We use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just read the corresponding TXDP register. + * + * XXX: Is TXDP read and clear ? + */ +u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue) +{ + u16 tx_reg; + + /* + * Get the transmit queue descriptor pointer from the selected queue + */ + /*5210 doesn't have QCU*/ + if (ah->ah_version == AR5K_AR5210) { + /* Assume a data queue */ + tx_reg = AR5K_NOQCU_TXDP0; + } else { + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + return ath5k_hw_reg_read(ah, tx_reg); +} + +/** + * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue + * + * @ah: The &struct ath5k_hw + * @queue: The hw queue number + * + * Set TX descriptor's address for a specific queue. For 5210 we ignore + * the queue number and we use tx queue type since we only have 2 queues + * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue. + * For newer chips with QCU/DCU we just set the corresponding TXDP register. + * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still + * active. + */ +int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr) +{ + u16 tx_reg; + + /* + * Set the transmit queue descriptor pointer register by type + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + /* Assume a data queue */ + tx_reg = AR5K_NOQCU_TXDP0; + } else { + /* + * Set the transmit queue descriptor pointer for + * the selected queue on QCU for 5211+ + * (this won't work if the queue is still active) + */ + if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue)) + return -EIO; + + tx_reg = AR5K_QUEUE_TXDP(queue); + } + + /* Set descriptor pointer */ + ath5k_hw_reg_write(ah, phys_addr, tx_reg); + + return 0; +} + +/** + * ath5k_hw_update_tx_triglevel - Update tx trigger level + * + * @ah: The &struct ath5k_hw + * @increase: Flag to force increase of trigger level + * + * This function increases/decreases the tx trigger level for the tx fifo + * buffer (aka FIFO threshold) that is used to indicate when PCU flushes + * the buffer and transmits it's data. Lowering this results sending small + * frames more quickly but can lead to tx underruns, raising it a lot can + * result other problems (i think bmiss is related). Right now we start with + * the lowest possible (64Bytes) and if we get tx underrun we increase it using + * the increase flag. Returns -EIO if we have have reached maximum/minimum. + * + * XXX: Link this with tx DMA size ? + * XXX: Use it to save interrupts ? + * TODO: Needs testing, i think it's related to bmiss... + */ +int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, int increase) +{ + u32 trigger_level, imr; + int ret = -EIO; + + /* + * Disable interrupts by setting the mask + */ + imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL); + + trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG), + AR5K_TXCFG_TXFULL); + + if (!increase) { + if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES) + goto done; + } else + trigger_level += + ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2); + + /* + * Update trigger level on success + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL); + else + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_TXFULL, trigger_level); + + ret = 0; + +done: + /* + * Restore interrupt mask + */ + ath5k_hw_set_imr(ah, imr); + + return ret; +} + +/*******************\ +* Interrupt masking * +\*******************/ + +/** + * ath5k_hw_is_intr_pending - Check if we have pending interrupts + * + * @ah: The &struct ath5k_hw + * + * Check if we have pending interrupts to process. Returns 1 if we + * have pending interrupts and 0 if we haven't. + */ +int ath5k_hw_is_intr_pending(struct ath5k_hw *ah) +{ + return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0; +} + +/** + * ath5k_hw_get_isr - Get interrupt status + * + * @ah: The @struct ath5k_hw + * @interrupt_mask: Driver's interrupt mask used to filter out + * interrupts in sw. + * + * This function is used inside our interrupt handler to determine the reason + * for the interrupt by reading Primary Interrupt Status Register. Returns an + * abstract interrupt status mask which is mostly ISR with some uncommon bits + * being mapped on some standard non hw-specific positions + * (check out &ath5k_int). + * + * NOTE: We use read-and-clear register, so after this function is called ISR + * is zeroed. + */ +int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask) +{ + u32 data; + + /* + * Read interrupt status from the Interrupt Status register + * on 5210 + */ + if (ah->ah_version == AR5K_AR5210) { + data = ath5k_hw_reg_read(ah, AR5K_ISR); + if (data == AR5K_INT_NOCARD) { + *interrupt_mask = data; + return -ENODEV; + } + } else { + /* + * Read interrupt status from Interrupt + * Status Register shadow copy (Read And Clear) + * + * Note: PISR/SISR Not available on 5210 + */ + data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR); + if (data == AR5K_INT_NOCARD) { + *interrupt_mask = data; + return -ENODEV; + } + } + + /* + * Get abstract interrupt mask (driver-compatible) + */ + *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr; + + if (ah->ah_version != AR5K_AR5210) { + u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2); + + /*HIU = Host Interface Unit (PCI etc)*/ + if (data & (AR5K_ISR_HIUERR)) + *interrupt_mask |= AR5K_INT_FATAL; + + /*Beacon Not Ready*/ + if (data & (AR5K_ISR_BNR)) + *interrupt_mask |= AR5K_INT_BNR; + + if (sisr2 & (AR5K_SISR2_SSERR | AR5K_SISR2_DPERR | + AR5K_SISR2_MCABT)) + *interrupt_mask |= AR5K_INT_FATAL; + + if (data & AR5K_ISR_TIM) + *interrupt_mask |= AR5K_INT_TIM; + + if (data & AR5K_ISR_BCNMISC) { + if (sisr2 & AR5K_SISR2_TIM) + *interrupt_mask |= AR5K_INT_TIM; + if (sisr2 & AR5K_SISR2_DTIM) + *interrupt_mask |= AR5K_INT_DTIM; + if (sisr2 & AR5K_SISR2_DTIM_SYNC) + *interrupt_mask |= AR5K_INT_DTIM_SYNC; + if (sisr2 & AR5K_SISR2_BCN_TIMEOUT) + *interrupt_mask |= AR5K_INT_BCN_TIMEOUT; + if (sisr2 & AR5K_SISR2_CAB_TIMEOUT) + *interrupt_mask |= AR5K_INT_CAB_TIMEOUT; + } + + if (data & AR5K_ISR_RXDOPPLER) + *interrupt_mask |= AR5K_INT_RX_DOPPLER; + if (data & AR5K_ISR_QCBRORN) { + *interrupt_mask |= AR5K_INT_QCBRORN; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), + AR5K_SISR3_QCBRORN); + } + if (data & AR5K_ISR_QCBRURN) { + *interrupt_mask |= AR5K_INT_QCBRURN; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR3), + AR5K_SISR3_QCBRURN); + } + if (data & AR5K_ISR_QTRIG) { + *interrupt_mask |= AR5K_INT_QTRIG; + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR4), + AR5K_SISR4_QTRIG); + } + + if (data & AR5K_ISR_TXOK) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), + AR5K_SISR0_QCU_TXOK); + + if (data & AR5K_ISR_TXDESC) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR0), + AR5K_SISR0_QCU_TXDESC); + + if (data & AR5K_ISR_TXERR) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), + AR5K_SISR1_QCU_TXERR); + + if (data & AR5K_ISR_TXEOL) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR1), + AR5K_SISR1_QCU_TXEOL); + + if (data & AR5K_ISR_TXURN) + ah->ah_txq_isr |= AR5K_REG_MS( + ath5k_hw_reg_read(ah, AR5K_RAC_SISR2), + AR5K_SISR2_QCU_TXURN); + } else { + if (data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT | + AR5K_ISR_HIUERR | AR5K_ISR_DPERR)) + *interrupt_mask |= AR5K_INT_FATAL; + + /* + * XXX: BMISS interrupts may occur after association. + * I found this on 5210 code but it needs testing. If this is + * true we should disable them before assoc and re-enable them + * after a successful assoc + some jiffies. + interrupt_mask &= ~AR5K_INT_BMISS; + */ + } + + return 0; +} + +/** + * ath5k_hw_set_imr - Set interrupt mask + * + * @ah: The &struct ath5k_hw + * @new_mask: The new interrupt mask to be set + * + * Set the interrupt mask in hw to save interrupts. We do that by mapping + * ath5k_int bits to hw-specific bits to remove abstraction and writing + * Interrupt Mask Register. + */ +enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask) +{ + enum ath5k_int old_mask, int_mask; + + old_mask = ah->ah_imr; + + /* + * Disable card interrupts to prevent any race conditions + * (they will be re-enabled afterwards if AR5K_INT GLOBAL + * is set again on the new mask). + */ + if (old_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + /* + * Add additional, chipset-dependent interrupt mask flags + * and write them to the IMR (interrupt mask register). + */ + int_mask = new_mask & AR5K_INT_COMMON; + + if (ah->ah_version != AR5K_AR5210) { + /* Preserve per queue TXURN interrupt mask */ + u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2) + & AR5K_SIMR2_QCU_TXURN; + + if (new_mask & AR5K_INT_FATAL) { + int_mask |= AR5K_IMR_HIUERR; + simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR + | AR5K_SIMR2_DPERR); + } + + /*Beacon Not Ready*/ + if (new_mask & AR5K_INT_BNR) + int_mask |= AR5K_INT_BNR; + + if (new_mask & AR5K_INT_TIM) + int_mask |= AR5K_IMR_TIM; + + if (new_mask & AR5K_INT_TIM) + simr2 |= AR5K_SISR2_TIM; + if (new_mask & AR5K_INT_DTIM) + simr2 |= AR5K_SISR2_DTIM; + if (new_mask & AR5K_INT_DTIM_SYNC) + simr2 |= AR5K_SISR2_DTIM_SYNC; + if (new_mask & AR5K_INT_BCN_TIMEOUT) + simr2 |= AR5K_SISR2_BCN_TIMEOUT; + if (new_mask & AR5K_INT_CAB_TIMEOUT) + simr2 |= AR5K_SISR2_CAB_TIMEOUT; + + if (new_mask & AR5K_INT_RX_DOPPLER) + int_mask |= AR5K_IMR_RXDOPPLER; + + /* Note: Per queue interrupt masks + * are set via reset_tx_queue (qcu.c) */ + ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR); + ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2); + + } else { + if (new_mask & AR5K_INT_FATAL) + int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT + | AR5K_IMR_HIUERR | AR5K_IMR_DPERR); + + ath5k_hw_reg_write(ah, int_mask, AR5K_IMR); + } + + /* If RXNOFRM interrupt is masked disable it + * by setting AR5K_RXNOFRM to zero */ + if (!(new_mask & AR5K_INT_RXNOFRM)) + ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM); + + /* Store new interrupt mask */ + ah->ah_imr = new_mask; + + /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */ + if (new_mask & AR5K_INT_GLOBAL) { + ath5k_hw_reg_write(ah, ah->ah_ier, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); + } + + return old_mask; +} + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_eeprom.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_eeprom.c new file mode 100644 index 000000000..983d206b7 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_eeprom.c @@ -0,0 +1,1760 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/*************************************\ +* EEPROM access functions and helpers * +\*************************************/ + +#include <unistd.h> +#include <stdlib.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * Read from eeprom + */ +static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data) +{ + u32 status, timeout; + + /* + * Initialize EEPROM access + */ + if (ah->ah_version == AR5K_AR5210) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE); + (void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset)); + } else { + ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE); + AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD, + AR5K_EEPROM_CMD_READ); + } + + for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) { + status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS); + if (status & AR5K_EEPROM_STAT_RDDONE) { + if (status & AR5K_EEPROM_STAT_RDERR) + return -EIO; + *data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) & + 0xffff); + return 0; + } + udelay(15); + } + + return -ETIMEDOUT; +} + +/* + * Translate binary channel representation in EEPROM to frequency + */ +static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin, + unsigned int mode) +{ + u16 val; + + if (bin == AR5K_EEPROM_CHANNEL_DIS) + return bin; + + if (mode == AR5K_EEPROM_MODE_11A) { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = (5 * bin) + 4800; + else + val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 : + (bin * 10) + 5100; + } else { + if (ee->ee_version > AR5K_EEPROM_VERSION_3_2) + val = bin + 2300; + else + val = bin + 2400; + } + + return val; +} + +/* + * Initialize eeprom & capabilities structs + */ +static int +ath5k_eeprom_init_header(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int ret; + u16 val; + + /* + * Read values from EEPROM and store them in the capability structure + */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header); + + /* Return if we have an old EEPROM */ + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0) + return 0; + + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version), + ee_ant_gain); + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1); + + /* XXX: Don't know which versions include these two */ + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC2, ee_misc2); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC3, ee_misc3); + + if (ee->ee_version >= AR5K_EEPROM_VERSION_5_0) { + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC4, ee_misc4); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC5, ee_misc5); + AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC6, ee_misc6); + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7; + + AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val); + ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7; + ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7; + } + + AR5K_EEPROM_READ(AR5K_EEPROM_IS_HB63, val); + + if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && val) + ee->ee_is_hb63 = 1; + else + ee->ee_is_hb63 = 0; + + AR5K_EEPROM_READ(AR5K_EEPROM_RFKILL, val); + ee->ee_rfkill_pin = (u8) AR5K_REG_MS(val, AR5K_EEPROM_RFKILL_GPIO_SEL); + ee->ee_rfkill_pol = val & AR5K_EEPROM_RFKILL_POLARITY ? 1 : 0; + + return 0; +} + + +/* + * Read antenna infos from eeprom + */ +static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret, i = 0; + + AR5K_EEPROM_READ(o++, val); + ee->ee_switch_settling[mode] = (val >> 8) & 0x7f; + ee->ee_atn_tx_rx[mode] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] = (val >> 10) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 4) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 2) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 14) & 0x3; + ee->ee_ant_control[mode][i++] = (val >> 8) & 0x3f; + ee->ee_ant_control[mode][i++] = (val >> 2) & 0x3f; + ee->ee_ant_control[mode][i] = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ant_control[mode][i++] |= (val >> 12) & 0xf; + ee->ee_ant_control[mode][i++] = (val >> 6) & 0x3f; + ee->ee_ant_control[mode][i++] = val & 0x3f; + + /* Get antenna modes */ + ah->ah_antenna[mode][0] = + (ee->ee_ant_control[mode][0] << 4); + ah->ah_antenna[mode][AR5K_ANT_FIXED_A] = + ee->ee_ant_control[mode][1] | + (ee->ee_ant_control[mode][2] << 6) | + (ee->ee_ant_control[mode][3] << 12) | + (ee->ee_ant_control[mode][4] << 18) | + (ee->ee_ant_control[mode][5] << 24); + ah->ah_antenna[mode][AR5K_ANT_FIXED_B] = + ee->ee_ant_control[mode][6] | + (ee->ee_ant_control[mode][7] << 6) | + (ee->ee_ant_control[mode][8] << 12) | + (ee->ee_ant_control[mode][9] << 18) | + (ee->ee_ant_control[mode][10] << 24); + + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read supported modes and some mode-specific calibration data + * from eeprom + */ +static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, + unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + ee->ee_n_piers[mode] = 0; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); + switch(mode) { + case AR5K_EEPROM_MODE_11A: + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; + break; + case AR5K_EEPROM_MODE_11G: + case AR5K_EEPROM_MODE_11B: + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; + break; + } + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xlna_enable[mode] = (val >> 8) & 0xff; + ee->ee_thr_62[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28; + + AR5K_EEPROM_READ(o++, val); + ee->ee_tx_end2xpa_disable[mode] = (val >> 8) & 0xff; + ee->ee_tx_frm2xpa_enable[mode] = val & 0xff; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pga_desired_size[mode] = (val >> 8) & 0xff; + + if ((val & 0xff) & 0x80) + ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1); + else + ee->ee_noise_floor_thr[mode] = val & 0xff; + + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) + ee->ee_noise_floor_thr[mode] = + mode == AR5K_EEPROM_MODE_11A ? -54 : -1; + + AR5K_EEPROM_READ(o++, val); + ee->ee_xlna_gain[mode] = (val >> 5) & 0xff; + ee->ee_x_gain[mode] = (val >> 1) & 0xf; + ee->ee_xpd[mode] = val & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) + ee->ee_fixed_bias[mode] = (val >> 13) & 0x1; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) { + AR5K_EEPROM_READ(o++, val); + ee->ee_false_detect[mode] = (val >> 6) & 0x7f; + + if (mode == AR5K_EEPROM_MODE_11A) + ee->ee_xr_power[mode] = val & 0x3f; + else { + ee->ee_ob[mode][0] = val & 0x7; + ee->ee_db[mode][0] = (val >> 3) & 0x7; + } + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) { + ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN; + ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA; + } else { + ee->ee_i_gain[mode] = (val >> 13) & 0x7; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_gain[mode] |= (val << 3) & 0x38; + + if (mode == AR5K_EEPROM_MODE_11G) { + ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff; + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6) + ee->ee_scaled_cck_delta = (val >> 11) & 0x1f; + } + } + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 && + mode == AR5K_EEPROM_MODE_11A) { + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + } + + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_0) + goto done; + + /* Note: >= v5 have bg freq piers on another location + * so these freq piers are ignored for >= v5 (should be 0xff + * anyway) */ + switch(mode) { + case AR5K_EEPROM_MODE_11A: + if (ah->ah_ee_version < AR5K_EEPROM_VERSION_4_1) + break; + + AR5K_EEPROM_READ(o++, val); + ee->ee_margin_tx_rx[mode] = val & 0x3f; + break; + case AR5K_EEPROM_MODE_11B: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_b[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_b[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_b[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + break; + case AR5K_EEPROM_MODE_11G: + AR5K_EEPROM_READ(o++, val); + + ee->ee_pwr_cal_g[0].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + ee->ee_pwr_cal_g[1].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + AR5K_EEPROM_READ(o++, val); + ee->ee_turbo_max_power[mode] = val & 0x7f; + ee->ee_xr_power[mode] = (val >> 7) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_pwr_cal_g[2].freq = + ath5k_eeprom_bin2freq(ee, val & 0xff, mode); + if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS) + ee->ee_n_piers[mode]++; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f; + + AR5K_EEPROM_READ(o++, val); + ee->ee_i_cal[mode] = (val >> 8) & 0x3f; + ee->ee_q_cal[mode] = (val >> 3) & 0x1f; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) { + AR5K_EEPROM_READ(o++, val); + ee->ee_cck_ofdm_gain_delta = val & 0xff; + } + break; + } + +done: + /* return new offset */ + *offset = o; + + return 0; +} + +/* + * Read turbo mode information on newer EEPROM versions + */ +static int +ath5k_eeprom_read_turbo_modes(struct ath5k_hw *ah, + u32 *offset, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 o = *offset; + u16 val; + int ret; + + if (ee->ee_version < AR5K_EEPROM_VERSION_5_0) + return 0; + + switch (mode){ + case AR5K_EEPROM_MODE_11A: + ee->ee_switch_settling_turbo[mode] = (val >> 6) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 13) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x7) << 3; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 3) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 9) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x1) << 7; + ee->ee_pga_desired_size_turbo[mode] = (val >> 1) & 0xff; + + if (AR5K_EEPROM_EEMAP(ee->ee_misc0) >=2) + ee->ee_pd_gain_overlap = (val >> 9) & 0xf; + break; + case AR5K_EEPROM_MODE_11G: + ee->ee_switch_settling_turbo[mode] = (val >> 8) & 0x7f; + + ee->ee_atn_tx_rx_turbo[mode] = (val >> 15) & 0x7; + AR5K_EEPROM_READ(o++, val); + ee->ee_atn_tx_rx_turbo[mode] |= (val & 0x1f) << 1; + ee->ee_margin_tx_rx_turbo[mode] = (val >> 5) & 0x3f; + + ee->ee_adc_desired_size_turbo[mode] = (val >> 11) & 0x7f; + AR5K_EEPROM_READ(o++, val); + ee->ee_adc_desired_size_turbo[mode] |= (val & 0x7) << 5; + ee->ee_pga_desired_size_turbo[mode] = (val >> 3) & 0xff; + break; + } + + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read mode-specific data (except power calibration data) */ +static int +ath5k_eeprom_init_modes(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u32 mode_offset[3]; + unsigned int mode; + u32 offset; + int ret; + + /* + * Get values for all modes + */ + mode_offset[AR5K_EEPROM_MODE_11A] = AR5K_EEPROM_MODES_11A(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11B] = AR5K_EEPROM_MODES_11B(ah->ah_ee_version); + mode_offset[AR5K_EEPROM_MODE_11G] = AR5K_EEPROM_MODES_11G(ah->ah_ee_version); + + ee->ee_turbo_max_power[AR5K_EEPROM_MODE_11A] = + AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header); + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + offset = mode_offset[mode]; + + ret = ath5k_eeprom_read_ants(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_modes(ah, &offset, mode); + if (ret) + return ret; + + ret = ath5k_eeprom_read_turbo_modes(ah, &offset, mode); + if (ret) + return ret; + } + + /* override for older eeprom versions for better performance */ + if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2) { + ee->ee_thr_62[AR5K_EEPROM_MODE_11A] = 15; + ee->ee_thr_62[AR5K_EEPROM_MODE_11B] = 28; + ee->ee_thr_62[AR5K_EEPROM_MODE_11G] = 28; + } + + return 0; +} + +/* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff + * frequency mask) */ +static inline int +ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, + struct ath5k_chan_pcal_info *pc, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int o = *offset; + int i = 0; + u8 freq1, freq2; + int ret; + u16 val; + + ee->ee_n_piers[mode] = 0; + while(i < max) { + AR5K_EEPROM_READ(o++, val); + + freq1 = val & 0xff; + if (!freq1) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); + ee->ee_n_piers[mode]++; + + freq2 = (val >> 8) & 0xff; + if (!freq2) + break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); + ee->ee_n_piers[mode]++; + } + + /* return new offset */ + *offset = o; + + return 0; +} + +/* Read frequency piers for 802.11a */ +static int +ath5k_eeprom_init_11a_pcal_freq(struct ath5k_hw *ah, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal = ee->ee_pwr_cal_a; + int i, ret; + u16 val; + u8 mask; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_5GHZ_CHAN, pcal, + AR5K_EEPROM_MODE_11A); + } else { + mask = AR5K_EEPROM_FREQ_M(ah->ah_ee_version); + + AR5K_EEPROM_READ(offset++, val); + pcal[0].freq = (val >> 9) & mask; + pcal[1].freq = (val >> 2) & mask; + pcal[2].freq = (val << 5) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[2].freq |= (val >> 11) & 0x1f; + pcal[3].freq = (val >> 4) & mask; + pcal[4].freq = (val << 3) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[4].freq |= (val >> 13) & 0x7; + pcal[5].freq = (val >> 6) & mask; + pcal[6].freq = (val << 1) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[6].freq |= (val >> 15) & 0x1; + pcal[7].freq = (val >> 8) & mask; + pcal[8].freq = (val >> 1) & mask; + pcal[9].freq = (val << 6) & mask; + + AR5K_EEPROM_READ(offset++, val); + pcal[9].freq |= (val >> 10) & 0x3f; + + /* Fixed number of piers */ + ee->ee_n_piers[AR5K_EEPROM_MODE_11A] = 10; + + for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) { + pcal[i].freq = ath5k_eeprom_bin2freq(ee, + pcal[i].freq, AR5K_EEPROM_MODE_11A); + } + } + + return 0; +} + +/* Read frequency piers for 802.11bg on eeprom versions >= 5 and eemap >= 2 */ +static inline int +ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + + switch(mode) { + case AR5K_EEPROM_MODE_11B: + pcal = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + pcal = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + ath5k_eeprom_read_freq_list(ah, &offset, + AR5K_EEPROM_N_2GHZ_CHAN_2413, pcal, + mode); + + return 0; +} + +/* + * Read power calibration for RF5111 chips + * + * For RF5111 we have an XPD -eXternal Power Detector- curve + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * here and interpolate later. + */ + +/* Used to match PCDAC steps with power values on RF5111 chips + * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC + * steps that match with the power values we read from eeprom. On + * older eeprom versions (< 3.2) these steps are equaly spaced at + * 10% of the pcdac curve -until the curve reaches it's maximum- + * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) + * these 11 steps are spaced in a different way. This function returns + * the pcdac steps based on eeprom version and curve min/max so that we + * can have pcdac/pwr points. + */ +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + static const u16 intercepts3[] = + { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; + static const u16 intercepts3_2[] = + { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + const u16 *ip; + unsigned i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; + + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; +} + +/* Convert RF5111 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5111 *pcinfo; + struct ath5k_pdgain_info *pd; + u8 pier, point, idx; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5111_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + calloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info)); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Only one curve for RF5111 + * find out which one and place + * in in pd_curves. + * Note: ee_x_gain is reversed here */ + for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { + + if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) { + pdgain_idx[0] = idx; + break; + } + } + + ee->ee_pd_gains[mode] = 1; + + pd = &chinfo[pier].pd_curves[idx]; + + pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111; + + /* Allocate pd points for this curve */ + pd->pd_step = calloc(AR5K_EEPROM_N_PWR_POINTS_5111, sizeof(u8)); + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = calloc(AR5K_EEPROM_N_PWR_POINTS_5111, sizeof(s16)); + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (convert power to 0.25dB units + * for RF5112 combatibility) */ + for (point = 0; point < pd->pd_points; point++) { + + /* Absolute values */ + pd->pd_pwr[point] = 2 * pcinfo->pwr[point]; + + /* Already sorted */ + pd->pd_step[point] = pcinfo->pcdac[point]; + } + + /* Set min/max pwr */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + chinfo[pier].max_pwr = pd->pd_pwr[10]; + + } + + return 0; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcal; + int offset, ret; + int i; + u16 val; + + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + switch(mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ret = ath5k_eeprom_init_11a_pcal_freq(ah, + offset + AR5K_EEPROM_GROUP1_OFFSET); + if (ret < 0) + return ret; + + offset += AR5K_EEPROM_GROUP2_OFFSET; + pcal = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header) && + !AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_b; + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2412; + pcal[1].freq = 2447; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + pcal = ee->ee_pwr_cal_g; + offset += AR5K_EEPROM_GROUP4_OFFSET; + + /* fixed piers */ + pcal[0].freq = 2312; + pcal[1].freq = 2412; + pcal[2].freq = 2484; + ee->ee_n_piers[mode] = 3; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + struct ath5k_chan_pcal_info_rf5111 *cdata = + &pcal[i].rf5111_info; + + AR5K_EEPROM_READ(offset++, val); + cdata->pcdac_max = ((val >> 10) & AR5K_EEPROM_PCDAC_M); + cdata->pcdac_min = ((val >> 4) & AR5K_EEPROM_PCDAC_M); + cdata->pwr[0] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[0] |= ((val >> 14) & 0x3); + cdata->pwr[1] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[2] = ((val >> 2) & AR5K_EEPROM_POWER_M); + cdata->pwr[3] = ((val << 4) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[3] |= ((val >> 12) & 0xf); + cdata->pwr[4] = ((val >> 6) & AR5K_EEPROM_POWER_M); + cdata->pwr[5] = (val & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[6] = ((val >> 10) & AR5K_EEPROM_POWER_M); + cdata->pwr[7] = ((val >> 4) & AR5K_EEPROM_POWER_M); + cdata->pwr[8] = ((val << 2) & AR5K_EEPROM_POWER_M); + + AR5K_EEPROM_READ(offset++, val); + cdata->pwr[8] |= ((val >> 14) & 0x3); + cdata->pwr[9] = ((val >> 8) & AR5K_EEPROM_POWER_M); + cdata->pwr[10] = ((val >> 2) & AR5K_EEPROM_POWER_M); + + ath5k_get_pcdac_intercepts(ah, cdata->pcdac_min, + cdata->pcdac_max, cdata->pcdac); + } + + return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal); +} + + +/* + * Read power calibration for RF5112 chips + * + * For RF5112 we have 4 XPD -eXternal Power Detector- curves + * for each calibrated channel on 0, -6, -12 and -18dbm but we only + * use the higher (3) and the lower (0) curves. Each curve has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we read 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) here and + * interpolate later. + * + * Note: Many vendors just use xpd 0 so xpd 3 is zeroed. + */ + +/* Convert RF5112 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5112_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + calloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info)); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* Lowest gain curve (max power) */ + if (pdg == 0) { + /* One more point for better accuracy */ + pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = calloc(pd->pd_points, sizeof(u8)); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = calloc(pd->pd_points, sizeof(s16)); + + if (!pd->pd_pwr) + return -ENOMEM; + + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + pd->pd_step[0] = pcinfo->pcdac_x0[0]; + pd->pd_pwr[0] = pcinfo->pwr_x0[0]; + + for (point = 1; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x0[point]; + + /* Deltas */ + pd->pd_step[point] = + pd->pd_step[point - 1] + + pcinfo->pcdac_x0[point]; + } + + /* Set min power for this frequency */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Highest gain curve (min power) */ + } else if (pdg == 1) { + + pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = calloc(pd->pd_points, sizeof(u8)); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = calloc(pd->pd_points, sizeof(s16)); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + for (point = 0; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x3[point]; + + /* Fixed points */ + pd->pd_step[point] = + pcinfo->pcdac_x3[point]; + } + + /* Since we have a higher gain curve + * override min power */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + } + } + } + + return 0; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; + struct ath5k_chan_pcal_info *gen_chan_info; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + u8 i, c; + u16 val; + int ret; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from lower (x0) to + * higher (x3) gain */ + for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> i) & 0x1) + pdgain_idx[pd_gains++] = i; + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0 || pd_gains > 2) + return -EINVAL; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + /* + * Read 5GHz EEPROM channels + */ + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + + offset += AR5K_EEPROM_GROUP2_OFFSET; + gen_chan_info = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP3_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + offset = AR5K_EEPROM_GROUPS_START(ee->ee_version); + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += AR5K_EEPROM_GROUP4_OFFSET; + else if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += AR5K_EEPROM_GROUP2_OFFSET; + + /* NB: frequency piers parsed during mode init */ + gen_chan_info = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + chan_pcal_info = &gen_chan_info[i].rf5112_info; + + /* Power values in quarter dB + * for the lower xpd gain curve + * (0 dBm -> higher output power) */ + for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff); + chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff); + } + + /* PCDAC steps + * corresponding to the above power + * measurements */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pcdac_x0[1] = (val & 0x1f); + chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); + chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); + + /* Power values in quarter dB + * for the higher xpd gain curve + * (18 dBm -> lower output power) */ + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff); + chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff); + + AR5K_EEPROM_READ(offset++, val); + chan_pcal_info->pwr_x3[2] = (val & 0xff); + + /* PCDAC steps + * corresponding to the above power + * measurements (fixed) */ + chan_pcal_info->pcdac_x3[0] = 20; + chan_pcal_info->pcdac_x3[1] = 35; + chan_pcal_info->pcdac_x3[2] = 63; + + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f); + + /* Last xpd0 power level is also channel maximum */ + gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; + } else { + chan_pcal_info->pcdac_x0[0] = 1; + gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff); + } + + } + + return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info); +} + + +/* + * Read power calibration for RF2413 chips + * + * For RF2413 we have a Power to PDDAC table (Power Detector) + * instead of a PCDAC and 4 pd gain curves for each calibrated channel. + * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y + * axis and looks like an exponential function like the RF5111 curve. + * + * To recreate the curves we read here the points and interpolate + * later. Note that in most cases only 2 (higher and lower) curves are + * used (like RF5112) but vendors have the oportunity to include all + * 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + */ + +/* For RF2413 power calibration data doesn't start on a fixed location and + * if a mode is not supported, it's section is missing -not zeroed-. + * So we need to calculate the starting offset for each section by using + * these two functions */ + +/* Return the size of each section based on the mode and the number of pd + * gains available (maximum 4). */ +static inline unsigned int +ath5k_pdgains_size_2413(struct ath5k_eeprom_info *ee, unsigned int mode) +{ + static const unsigned int pdgains_size[] = { 4, 6, 9, 12 }; + unsigned int sz; + + sz = pdgains_size[ee->ee_pd_gains[mode] - 1]; + sz *= ee->ee_n_piers[mode]; + + return sz; +} + +/* Return the starting offset for a section based on the modes supported + * and each section's size. */ +static unsigned int +ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) +{ + u32 offset = AR5K_EEPROM_CAL_DATA_START(ee->ee_misc4); + + switch(mode) { + case AR5K_EEPROM_MODE_11G: + if (AR5K_EEPROM_HDR_11B(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11B) + + AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + /* fall through */ + case AR5K_EEPROM_MODE_11B: + if (AR5K_EEPROM_HDR_11A(ee->ee_header)) + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11A) + + AR5K_EEPROM_N_5GHZ_CHAN / 2; + /* fall through */ + case AR5K_EEPROM_MODE_11A: + break; + default: + break; + } + + return offset; +} + +/* Convert RF2413 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, point; + int pdg; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf2413_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + calloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info)); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* One more point for the highest power + * curve (lowest gain) */ + if (pdg == ee->ee_pd_gains[mode] - 1) + pd->pd_points = AR5K_EEPROM_N_PD_POINTS; + else + pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1; + + /* Allocate pd points for this curve */ + pd->pd_step = calloc(pd->pd_points, sizeof(u8)); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = calloc(pd->pd_points, sizeof(s16)); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * convert all pwr levels to + * quarter dB for RF5112 combatibility */ + pd->pd_step[0] = pcinfo->pddac_i[pdg]; + pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; + + for (point = 1; point < pd->pd_points; point++) { + + pd->pd_pwr[point] = pd->pd_pwr[point - 1] + + 2 * pcinfo->pwr[pdg][point - 1]; + + pd->pd_step[point] = pd->pd_step[point - 1] + + pcinfo->pddac[pdg][point - 1]; + + } + + /* Highest gain curve -> min power */ + if (pdg == 0) + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Lowest gain curve -> max power */ + if (pdg == ee->ee_pd_gains[mode] - 1) + chinfo[pier].max_pwr = + pd->pd_pwr[pd->pd_points - 1]; + } + } + + return 0; +} + +/* Parse EEPROM data */ +static int +ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + struct ath5k_chan_pcal_info *chinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + u32 offset; + int idx, i, ret; + u16 val; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from higher to + * lower gain so we go backwards */ + for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> idx) & 0x1) + pdgain_idx[pd_gains++] = idx; + + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0) + return -EINVAL; + + offset = ath5k_cal_data_offset_2413(ee, mode); + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11a_pcal_freq(ah, offset); + offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + + ath5k_eeprom_init_11bg_2413(ah, mode, offset); + offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (i = 0; i < ee->ee_n_piers[mode]; i++) { + pcinfo = &chinfo[i].rf2413_info; + + /* + * Read pwr_i, pddac_i and the first + * 2 pd points (pwr, pddac) + */ + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[0] = val & 0x1f; + pcinfo->pddac_i[0] = (val >> 5) & 0x7f; + pcinfo->pwr[0][0] = (val >> 12) & 0xf; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][0] = val & 0x3f; + pcinfo->pwr[0][1] = (val >> 6) & 0xf; + pcinfo->pddac[0][1] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[0][2] = val & 0xf; + pcinfo->pddac[0][2] = (val >> 4) & 0x3f; + + pcinfo->pwr[0][3] = 0; + pcinfo->pddac[0][3] = 0; + + if (pd_gains > 1) { + /* + * Pd gain 0 is not the last pd gain + * so it only has 2 pd points. + * Continue wih pd gain 1. + */ + pcinfo->pwr_i[1] = (val >> 10) & 0x1f; + + pcinfo->pddac_i[1] = (val >> 15) & 0x1; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac_i[1] |= (val & 0x3F) << 1; + + pcinfo->pwr[1][0] = (val >> 6) & 0xf; + pcinfo->pddac[1][0] = (val >> 10) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[1][1] = val & 0xf; + pcinfo->pddac[1][1] = (val >> 4) & 0x3f; + pcinfo->pwr[1][2] = (val >> 10) & 0xf; + + pcinfo->pddac[1][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[1][2] |= (val & 0xF) << 2; + + pcinfo->pwr[1][3] = 0; + pcinfo->pddac[1][3] = 0; + } else if (pd_gains == 1) { + /* + * Pd gain 0 is the last one so + * read the extra point. + */ + pcinfo->pwr[0][3] = (val >> 10) & 0xf; + + pcinfo->pddac[0][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[0][3] |= (val & 0xF) << 2; + } + + /* + * Proceed with the other pd_gains + * as above. + */ + if (pd_gains > 2) { + pcinfo->pwr_i[2] = (val >> 4) & 0x1f; + pcinfo->pddac_i[2] = (val >> 9) & 0x7f; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][0] = (val >> 0) & 0xf; + pcinfo->pddac[2][0] = (val >> 4) & 0x3f; + pcinfo->pwr[2][1] = (val >> 10) & 0xf; + + pcinfo->pddac[2][1] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[2][1] |= (val & 0xF) << 2; + + pcinfo->pwr[2][2] = (val >> 4) & 0xf; + pcinfo->pddac[2][2] = (val >> 8) & 0x3f; + + pcinfo->pwr[2][3] = 0; + pcinfo->pddac[2][3] = 0; + } else if (pd_gains == 2) { + pcinfo->pwr[1][3] = (val >> 4) & 0xf; + pcinfo->pddac[1][3] = (val >> 8) & 0x3f; + } + + if (pd_gains > 3) { + pcinfo->pwr_i[3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + + pcinfo->pddac_i[3] = (val >> 3) & 0x7f; + pcinfo->pwr[3][0] = (val >> 10) & 0xf; + pcinfo->pddac[3][0] = (val >> 14) & 0x3; + + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][0] |= (val & 0xF) << 2; + pcinfo->pwr[3][1] = (val >> 4) & 0xf; + pcinfo->pddac[3][1] = (val >> 8) & 0x3f; + + pcinfo->pwr[3][2] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[3][2] = (val >> 2) & 0x3f; + pcinfo->pwr[3][3] = (val >> 8) & 0xf; + + pcinfo->pddac[3][3] = (val >> 12) & 0xF; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; + } else if (pd_gains == 3) { + pcinfo->pwr[2][3] = (val >> 14) & 0x3; + AR5K_EEPROM_READ(offset++, val); + pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; + + pcinfo->pddac[2][3] = (val >> 2) & 0x3f; + } + } + + return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo); +} + + +/* + * Read per rate target power (this is the maximum tx power + * supported by the card). This info is used when setting + * tx power, no matter the channel. + * + * This also works for v5 EEPROMs. + */ +static int +ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rate_pcal_info; + u8 *rate_target_pwr_num; + u32 offset; + u16 val; + int ret, i; + + offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1); + rate_target_pwr_num = &ee->ee_rate_target_pwr_num[mode]; + switch (mode) { + case AR5K_EEPROM_MODE_11A: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_a; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN; + break; + case AR5K_EEPROM_MODE_11B: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_b; + ee->ee_rate_target_pwr_num[mode] = 2; /* 3rd is g mode's 1st */ + break; + case AR5K_EEPROM_MODE_11G: + offset += AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version); + rate_pcal_info = ee->ee_rate_tpwr_g; + ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_2GHZ_CHAN; + break; + default: + return -EINVAL; + } + + /* Different freq mask for older eeproms (<= v3.2) */ + if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2) { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7); + rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f); + rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f); + } + } else { + for (i = 0; i < (*rate_target_pwr_num); i++) { + AR5K_EEPROM_READ(offset++, val); + rate_pcal_info[i].freq = + ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode); + + rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f); + rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f; + + AR5K_EEPROM_READ(offset++, val); + + if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS || + val == 0) { + (*rate_target_pwr_num) = i; + break; + } + + rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf; + rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f); + rate_pcal_info[i].target_power_54 = (val & 0x3f); + } + } + + return 0; +} + +/* + * Read per channel calibration info from EEPROM + * + * This info is used to calibrate the baseband power table. Imagine + * that for each channel there is a power curve that's hw specific + * (depends on amplifier etc) and we try to "correct" this curve using + * offests we pass on to phy chip (baseband -> before amplifier) so that + * it can use accurate power values when setting tx power (takes amplifier's + * performance on each channel into account). + * + * EEPROM provides us with the offsets for some pre-calibrated channels + * and we have to interpolate to create the full table for these channels and + * also the table for any channel. + */ +static int +ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + int (*read_pcal)(struct ath5k_hw *hw, int mode); + int mode; + int err; + + if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 1)) + read_pcal = ath5k_eeprom_read_pcal_info_5112; + else if ((ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0) && + (AR5K_EEPROM_EEMAP(ee->ee_misc0) == 2)) + read_pcal = ath5k_eeprom_read_pcal_info_2413; + else + read_pcal = ath5k_eeprom_read_pcal_info_5111; + + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; + mode++) { + err = read_pcal(ah, mode); + if (err) + return err; + + err = ath5k_eeprom_read_target_rate_pwr_info(ah, mode); + if (err < 0) + return err; + } + + return 0; +} + +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + if (pd != NULL) { + free(pd->pd_step); + free(pd->pd_pwr); + } + } + + free(chinfo[pier].pd_curves); + } + + return 0; +} + +void +ath5k_eeprom_detach(struct ath5k_hw *ah) +{ + u8 mode; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} + +/* Read conformance test limits used for regulatory control */ +static int +ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep; + unsigned int fmask, pmask; + unsigned int ctl_mode; + int ret, i, j; + u32 offset; + u16 val; + + pmask = AR5K_EEPROM_POWER_M; + fmask = AR5K_EEPROM_FREQ_M(ee->ee_version); + offset = AR5K_EEPROM_CTL(ee->ee_version); + ee->ee_ctls = AR5K_EEPROM_N_CTLS(ee->ee_version); + for (i = 0; i < ee->ee_ctls; i += 2) { + AR5K_EEPROM_READ(offset++, val); + ee->ee_ctl[i] = (val >> 8) & 0xff; + ee->ee_ctl[i + 1] = val & 0xff; + } + + offset = AR5K_EEPROM_GROUP8_OFFSET; + if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) + offset += AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) - + AR5K_EEPROM_GROUP5_OFFSET; + else + offset += AR5K_EEPROM_GROUPS_START(ee->ee_version); + + rep = ee->ee_ctl_pwr; + for(i = 0; i < ee->ee_ctls; i++) { + switch(ee->ee_ctl[i] & AR5K_CTL_MODE_M) { + case AR5K_CTL_11A: + case AR5K_CTL_TURBO: + ctl_mode = AR5K_EEPROM_MODE_11A; + break; + default: + ctl_mode = AR5K_EEPROM_MODE_11G; + break; + } + if (ee->ee_ctl[i] == 0) { + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) + offset += 8; + else + offset += 7; + rep += AR5K_EEPROM_N_EDGES; + continue; + } + if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) { + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].freq = (val >> 8) & fmask; + rep[j + 1].freq = val & fmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j += 2) { + AR5K_EEPROM_READ(offset++, val); + rep[j].edge = (val >> 8) & pmask; + rep[j].flag = (val >> 14) & 1; + rep[j + 1].edge = val & pmask; + rep[j + 1].flag = (val >> 6) & 1; + } + } else { + AR5K_EEPROM_READ(offset++, val); + rep[0].freq = (val >> 9) & fmask; + rep[1].freq = (val >> 2) & fmask; + rep[2].freq = (val << 5) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[2].freq |= (val >> 11) & 0x1f; + rep[3].freq = (val >> 4) & fmask; + rep[4].freq = (val << 3) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].freq |= (val >> 13) & 0x7; + rep[5].freq = (val >> 6) & fmask; + rep[6].freq = (val << 1) & fmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].freq |= (val >> 15) & 0x1; + rep[7].freq = (val >> 8) & fmask; + + rep[0].edge = (val >> 2) & pmask; + rep[1].edge = (val << 4) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[1].edge |= (val >> 12) & 0xf; + rep[2].edge = (val >> 6) & pmask; + rep[3].edge = val & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[4].edge = (val >> 10) & pmask; + rep[5].edge = (val >> 4) & pmask; + rep[6].edge = (val << 2) & pmask; + + AR5K_EEPROM_READ(offset++, val); + rep[6].edge |= (val >> 14) & 0x3; + rep[7].edge = (val >> 8) & pmask; + } + for (j = 0; j < AR5K_EEPROM_N_EDGES; j++) { + rep[j].freq = ath5k_eeprom_bin2freq(ee, + rep[j].freq, ctl_mode); + } + rep += AR5K_EEPROM_N_EDGES; + } + + return 0; +} + + +/* + * Initialize eeprom power tables + */ +int +ath5k_eeprom_init(struct ath5k_hw *ah) +{ + int err; + + err = ath5k_eeprom_init_header(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_init_modes(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_pcal_info(ah); + if (err < 0) + return err; + + err = ath5k_eeprom_read_ctl_info(ah); + if (err < 0) + return err; + + return 0; +} + +/* + * Read the MAC address from eeprom + */ +int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) +{ + u8 mac_d[ETH_ALEN] = {}; + u32 total, offset; + u16 data; + int octet, ret; + + ret = ath5k_hw_eeprom_read(ah, 0x20, &data); + if (ret) + return ret; + + for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) { + ret = ath5k_hw_eeprom_read(ah, offset, &data); + if (ret) + return ret; + + total += data; + mac_d[octet + 1] = data & 0xff; + mac_d[octet] = data >> 8; + octet += 2; + } + + if (!total || total == 3 * 0xffff) + return -EINVAL; + + memcpy(mac, mac_d, ETH_ALEN); + + return 0; +} + +int ath5k_eeprom_is_hb63(struct ath5k_hw *ah) +{ + u16 data; + + ath5k_hw_eeprom_read(ah, AR5K_EEPROM_IS_HB63, &data); + + if ((ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4)) && data) + return 1; + else + return 0; +} + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_gpio.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_gpio.c new file mode 100644 index 000000000..2301ec70b --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_gpio.c @@ -0,0 +1,122 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/****************\ + GPIO Functions +\****************/ + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * Set GPIO inputs + */ +int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Set GPIO outputs + */ +int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + ath5k_hw_reg_write(ah, + (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio)) + | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR); + + return 0; +} + +/* + * Get GPIO state + */ +u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio) +{ + if (gpio >= AR5K_NUM_GPIO) + return 0xffffffff; + + /* GPIO input magic */ + return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) & + 0x1; +} + +/* + * Set GPIO state + */ +int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return -EINVAL; + + /* GPIO output magic */ + data = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + data &= ~(1 << gpio); + data |= (val & 1) << gpio; + + ath5k_hw_reg_write(ah, data, AR5K_GPIODO); + + return 0; +} + +/* + * Initialize the GPIO interrupt (RFKill switch) + */ +void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, + u32 interrupt_level) +{ + u32 data; + + if (gpio >= AR5K_NUM_GPIO) + return; + + /* + * Set the GPIO interrupt + */ + data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) & + ~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH | + AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) | + (AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA); + + ath5k_hw_reg_write(ah, interrupt_level ? data : + (data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR); + + ah->ah_imr |= AR5K_IMR_GPIO; + + /* Enable GPIO interrupts */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO); +} + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_initvals.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_initvals.c new file mode 100644 index 000000000..8f3bd2034 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_initvals.c @@ -0,0 +1,1560 @@ +/* + * Initial register settings functions + * + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +#include <unistd.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * Mode-independent initial register writes + */ + +struct ath5k_ini { + u16 ini_register; + u32 ini_value; + + enum { + AR5K_INI_WRITE = 0, /* Default */ + AR5K_INI_READ = 1, /* Cleared on read */ + } ini_mode; +}; + +/* + * Mode specific initial register values + */ + +struct ath5k_ini_mode { + u16 mode_register; + u32 mode_value[5]; +}; + +/* Initial register settings for AR5210 */ +static const struct ath5k_ini ar5210_ini[] = { + /* PCU and MAC registers */ + { AR5K_NOQCU_TXDP0, 0, AR5K_INI_WRITE }, + { AR5K_NOQCU_TXDP1, 0, AR5K_INI_WRITE }, + { AR5K_RXDP, 0, AR5K_INI_WRITE }, + { AR5K_CR, 0, AR5K_INI_WRITE }, + { AR5K_ISR, 0, AR5K_INI_READ }, + { AR5K_IMR, 0, AR5K_INI_WRITE }, + { AR5K_IER, AR5K_IER_DISABLE, AR5K_INI_WRITE }, + { AR5K_BSR, 0, AR5K_INI_READ }, + { AR5K_TXCFG, AR5K_DMASIZE_128B, AR5K_INI_WRITE }, + { AR5K_RXCFG, AR5K_DMASIZE_128B, AR5K_INI_WRITE }, + { AR5K_CFG, AR5K_INIT_CFG, AR5K_INI_WRITE }, + { AR5K_TOPS, 8, AR5K_INI_WRITE }, + { AR5K_RXNOFRM, 8, AR5K_INI_WRITE }, + { AR5K_RPGTO, 0, AR5K_INI_WRITE }, + { AR5K_TXNOFRM, 0, AR5K_INI_WRITE }, + { AR5K_SFR, 0, AR5K_INI_WRITE }, + { AR5K_MIBC, 0, AR5K_INI_WRITE }, + { AR5K_MISC, 0, AR5K_INI_WRITE }, + { AR5K_RX_FILTER_5210, 0, AR5K_INI_WRITE }, + { AR5K_MCAST_FILTER0_5210, 0, AR5K_INI_WRITE }, + { AR5K_MCAST_FILTER1_5210, 0, AR5K_INI_WRITE }, + { AR5K_TX_MASK0, 0, AR5K_INI_WRITE }, + { AR5K_TX_MASK1, 0, AR5K_INI_WRITE }, + { AR5K_CLR_TMASK, 0, AR5K_INI_WRITE }, + { AR5K_TRIG_LVL, AR5K_TUNE_MIN_TX_FIFO_THRES, AR5K_INI_WRITE }, + { AR5K_DIAG_SW_5210, 0, AR5K_INI_WRITE }, + { AR5K_RSSI_THR, AR5K_TUNE_RSSI_THRES, AR5K_INI_WRITE }, + { AR5K_TSF_L32_5210, 0, AR5K_INI_WRITE }, + { AR5K_TIMER0_5210, 0, AR5K_INI_WRITE }, + { AR5K_TIMER1_5210, 0xffffffff, AR5K_INI_WRITE }, + { AR5K_TIMER2_5210, 0xffffffff, AR5K_INI_WRITE }, + { AR5K_TIMER3_5210, 1, AR5K_INI_WRITE }, + { AR5K_CFP_DUR_5210, 0, AR5K_INI_WRITE }, + { AR5K_CFP_PERIOD_5210, 0, AR5K_INI_WRITE }, + /* PHY registers */ + { AR5K_PHY(0), 0x00000047, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(3), 0x09848ea6, AR5K_INI_WRITE }, + { AR5K_PHY(4), 0x3d32e000, AR5K_INI_WRITE }, + { AR5K_PHY(5), 0x0000076b, AR5K_INI_WRITE }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_DISABLE, AR5K_INI_WRITE }, + { AR5K_PHY(8), 0x02020200, AR5K_INI_WRITE }, + { AR5K_PHY(9), 0x00000e0e, AR5K_INI_WRITE }, + { AR5K_PHY(10), 0x0a020201, AR5K_INI_WRITE }, + { AR5K_PHY(11), 0x00036ffc, AR5K_INI_WRITE }, + { AR5K_PHY(12), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(13), 0x00000e0e, AR5K_INI_WRITE }, + { AR5K_PHY(14), 0x00000007, AR5K_INI_WRITE }, + { AR5K_PHY(15), 0x00020100, AR5K_INI_WRITE }, + { AR5K_PHY(16), 0x89630000, AR5K_INI_WRITE }, + { AR5K_PHY(17), 0x1372169c, AR5K_INI_WRITE }, + { AR5K_PHY(18), 0x0018b633, AR5K_INI_WRITE }, + { AR5K_PHY(19), 0x1284613c, AR5K_INI_WRITE }, + { AR5K_PHY(20), 0x0de8b8e0, AR5K_INI_WRITE }, + { AR5K_PHY(21), 0x00074859, AR5K_INI_WRITE }, + { AR5K_PHY(22), 0x7e80beba, AR5K_INI_WRITE }, + { AR5K_PHY(23), 0x313a665e, AR5K_INI_WRITE }, + { AR5K_PHY_AGCCTL, 0x00001d08, AR5K_INI_WRITE }, + { AR5K_PHY(25), 0x0001ce00, AR5K_INI_WRITE }, + { AR5K_PHY(26), 0x409a4190, AR5K_INI_WRITE }, + { AR5K_PHY(28), 0x0000000f, AR5K_INI_WRITE }, + { AR5K_PHY(29), 0x00000080, AR5K_INI_WRITE }, + { AR5K_PHY(30), 0x00000004, AR5K_INI_WRITE }, + { AR5K_PHY(31), 0x00000018, AR5K_INI_WRITE }, /* 0x987c */ + { AR5K_PHY(64), 0x00000000, AR5K_INI_WRITE }, /* 0x9900 */ + { AR5K_PHY(65), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(66), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(67), 0x00800000, AR5K_INI_WRITE }, + { AR5K_PHY(68), 0x00000003, AR5K_INI_WRITE }, + /* BB gain table (64bytes) */ + { AR5K_BB_GAIN(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(1), 0x00000020, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(2), 0x00000010, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(3), 0x00000030, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(4), 0x00000008, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(5), 0x00000028, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(6), 0x00000028, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(7), 0x00000004, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(8), 0x00000024, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(9), 0x00000014, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(10), 0x00000034, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(11), 0x0000000c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(12), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(13), 0x00000002, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(14), 0x00000022, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(15), 0x00000012, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(16), 0x00000032, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(17), 0x0000000a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(18), 0x0000002a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(19), 0x00000001, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(20), 0x00000021, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(21), 0x00000011, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(22), 0x00000031, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(23), 0x00000009, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(24), 0x00000029, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(25), 0x00000005, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(26), 0x00000025, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(27), 0x00000015, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(28), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(29), 0x0000000d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(30), 0x0000002d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(31), 0x00000003, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(32), 0x00000023, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(33), 0x00000013, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(34), 0x00000033, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(35), 0x0000000b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(36), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(37), 0x00000007, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(38), 0x00000027, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(39), 0x00000017, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(40), 0x00000037, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(41), 0x0000000f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(42), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(43), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(44), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(45), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(46), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(47), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(48), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(49), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(50), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(51), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(52), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(53), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(54), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(55), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(56), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(57), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(58), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(59), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(60), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(61), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(62), 0x0000002f, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(63), 0x0000002f, AR5K_INI_WRITE }, + /* 5110 RF gain table (64btes) */ + { AR5K_RF_GAIN(0), 0x0000001d, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(1), 0x0000005d, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(2), 0x0000009d, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(3), 0x000000dd, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(4), 0x0000011d, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(5), 0x00000021, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(6), 0x00000061, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(7), 0x000000a1, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(8), 0x000000e1, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(9), 0x00000031, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(10), 0x00000071, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(11), 0x000000b1, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(12), 0x0000001c, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(13), 0x0000005c, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(14), 0x00000029, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(15), 0x00000069, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(16), 0x000000a9, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(17), 0x00000020, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(18), 0x00000019, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(19), 0x00000059, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(20), 0x00000099, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(21), 0x00000030, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(22), 0x00000005, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(23), 0x00000025, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(24), 0x00000065, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(25), 0x000000a5, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(26), 0x00000028, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(27), 0x00000068, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(28), 0x0000001f, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(29), 0x0000001e, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(30), 0x00000018, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(31), 0x00000058, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(32), 0x00000098, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(33), 0x00000003, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(34), 0x00000004, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(35), 0x00000044, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(36), 0x00000084, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(37), 0x00000013, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(38), 0x00000012, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(39), 0x00000052, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(40), 0x00000092, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(41), 0x000000d2, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(42), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(43), 0x0000002a, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(44), 0x0000006a, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(45), 0x000000aa, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(46), 0x0000001b, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(47), 0x0000001a, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(48), 0x0000005a, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(49), 0x0000009a, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(50), 0x000000da, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(51), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(52), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(53), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(54), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(55), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(56), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(57), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(58), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(59), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(60), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(61), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(62), 0x00000006, AR5K_INI_WRITE }, + { AR5K_RF_GAIN(63), 0x00000006, AR5K_INI_WRITE }, + /* PHY activation */ + { AR5K_PHY(53), 0x00000020, AR5K_INI_WRITE }, + { AR5K_PHY(51), 0x00000004, AR5K_INI_WRITE }, + { AR5K_PHY(50), 0x00060106, AR5K_INI_WRITE }, + { AR5K_PHY(39), 0x0000006d, AR5K_INI_WRITE }, + { AR5K_PHY(48), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(52), 0x00000014, AR5K_INI_WRITE }, + { AR5K_PHY_ACT, AR5K_PHY_ACT_ENABLE, AR5K_INI_WRITE }, +}; + +/* Initial register settings for AR5211 */ +static const struct ath5k_ini ar5211_ini[] = { + { AR5K_RXDP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RTSD0, 0x84849c9c, AR5K_INI_WRITE }, + { AR5K_RTSD1, 0x7c7c7c7c, AR5K_INI_WRITE }, + { AR5K_RXCFG, 0x00000005, AR5K_INI_WRITE }, + { AR5K_MIBC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TOPS, 0x00000008, AR5K_INI_WRITE }, + { AR5K_RXNOFRM, 0x00000008, AR5K_INI_WRITE }, + { AR5K_TXNOFRM, 0x00000010, AR5K_INI_WRITE }, + { AR5K_RPGTO, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RFCNT, 0x0000001f, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(1), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(2), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(3), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(4), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(5), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(6), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(7), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(8), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(9), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_FP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_STA_ID1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BSS_ID0, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BSS_ID1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RSSI_THR, 0x00000000, AR5K_INI_WRITE }, + { AR5K_CFP_PERIOD_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TIMER0_5211, 0x00000030, AR5K_INI_WRITE }, + { AR5K_TIMER1_5211, 0x0007ffff, AR5K_INI_WRITE }, + { AR5K_TIMER2_5211, 0x01ffffff, AR5K_INI_WRITE }, + { AR5K_TIMER3_5211, 0x00000031, AR5K_INI_WRITE }, + { AR5K_CFP_DUR_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RX_FILTER_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MCAST_FILTER0_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MCAST_FILTER1_5211, 0x00000002, AR5K_INI_WRITE }, + { AR5K_DIAG_SW_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_ADDAC_TEST, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DEFAULT_ANTENNA, 0x00000000, AR5K_INI_WRITE }, + /* PHY registers */ + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(3), 0x2d849093, AR5K_INI_WRITE }, + { AR5K_PHY(4), 0x7d32e000, AR5K_INI_WRITE }, + { AR5K_PHY(5), 0x00000f6b, AR5K_INI_WRITE }, + { AR5K_PHY_ACT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(11), 0x00026ffe, AR5K_INI_WRITE }, + { AR5K_PHY(12), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(15), 0x00020100, AR5K_INI_WRITE }, + { AR5K_PHY(16), 0x206a017a, AR5K_INI_WRITE }, + { AR5K_PHY(19), 0x1284613c, AR5K_INI_WRITE }, + { AR5K_PHY(21), 0x00000859, AR5K_INI_WRITE }, + { AR5K_PHY(26), 0x409a4190, AR5K_INI_WRITE }, /* 0x9868 */ + { AR5K_PHY(27), 0x050cb081, AR5K_INI_WRITE }, + { AR5K_PHY(28), 0x0000000f, AR5K_INI_WRITE }, + { AR5K_PHY(29), 0x00000080, AR5K_INI_WRITE }, + { AR5K_PHY(30), 0x0000000c, AR5K_INI_WRITE }, + { AR5K_PHY(64), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(65), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(66), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(67), 0x00800000, AR5K_INI_WRITE }, + { AR5K_PHY(68), 0x00000001, AR5K_INI_WRITE }, + { AR5K_PHY(71), 0x0000092a, AR5K_INI_WRITE }, + { AR5K_PHY_IQ, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(73), 0x00058a05, AR5K_INI_WRITE }, + { AR5K_PHY(74), 0x00000001, AR5K_INI_WRITE }, + { AR5K_PHY(75), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_PAPD_PROBE, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(77), 0x00000000, AR5K_INI_WRITE }, /* 0x9934 */ + { AR5K_PHY(78), 0x00000000, AR5K_INI_WRITE }, /* 0x9938 */ + { AR5K_PHY(79), 0x0000003f, AR5K_INI_WRITE }, /* 0x993c */ + { AR5K_PHY(80), 0x00000004, AR5K_INI_WRITE }, + { AR5K_PHY(82), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(83), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(84), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_RADAR, 0x5d50f14c, AR5K_INI_WRITE }, + { AR5K_PHY(86), 0x00000018, AR5K_INI_WRITE }, + { AR5K_PHY(87), 0x004b6a8e, AR5K_INI_WRITE }, + /* Initial Power table (32bytes) + * common on all cards/modes. + * Note: Table is rewritten during + * txpower setup later using calibration + * data etc. so next write is non-common */ + { AR5K_PHY_PCDAC_TXPOWER(1), 0x06ff05ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(2), 0x07ff07ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(3), 0x08ff08ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(4), 0x09ff09ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(5), 0x0aff0aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(6), 0x0bff0bff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(7), 0x0cff0cff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(8), 0x0dff0dff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(9), 0x0fff0eff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(10), 0x12ff12ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(11), 0x14ff13ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(12), 0x16ff15ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(13), 0x19ff17ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(14), 0x1bff1aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(15), 0x1eff1dff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(16), 0x23ff20ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(17), 0x27ff25ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(18), 0x2cff29ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(19), 0x31ff2fff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(20), 0x37ff34ff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(21), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(22), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(23), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(24), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(25), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(26), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(27), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(28), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(29), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(30), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_PCDAC_TXPOWER(31), 0x3aff3aff, AR5K_INI_WRITE }, + { AR5K_PHY_CCKTXCTL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(642), 0x503e4646, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_2GHZ, 0x6480416c, AR5K_INI_WRITE }, + { AR5K_PHY(644), 0x0199a003, AR5K_INI_WRITE }, + { AR5K_PHY(645), 0x044cd610, AR5K_INI_WRITE }, + { AR5K_PHY(646), 0x13800040, AR5K_INI_WRITE }, + { AR5K_PHY(647), 0x1be00060, AR5K_INI_WRITE }, + { AR5K_PHY(648), 0x0c53800a, AR5K_INI_WRITE }, + { AR5K_PHY(649), 0x0014df3b, AR5K_INI_WRITE }, + { AR5K_PHY(650), 0x000001b5, AR5K_INI_WRITE }, + { AR5K_PHY(651), 0x00000020, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for AR5211 + * 5211 supports OFDM-only g (draft g) but we + * need to test it ! + */ +static const struct ath5k_ini_mode ar5211_ini_mode[] = { + { AR5K_TXCFG, + /* a aTurbo b g (OFDM) */ + { 0x00000015, 0x00000015, 0x0000001d, 0x00000015 } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001e0, 0x000001b8, 0x00000168 } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000001e0, 0x000000b0, 0x00000230 } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000d98, 0x00001180, 0x00001f48, 0x00000d98 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000a0e0 } }, + { AR5K_TIME_OUT, + { 0x04000400, 0x08000800, 0x20003000, 0x04000400 } }, + { AR5K_USEC_5211, + { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95, 0x0e8d8fa7 } }, + { AR5K_PHY_TURBO, + { 0x00000000, 0x00000003, 0x00000000, 0x00000000 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02020200, 0x02010200, 0x02020200 } }, + { AR5K_PHY(9), + { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e } }, + { AR5K_PHY(10), + { 0x0a020001, 0x0a020001, 0x05010000, 0x0a020001 } }, + { AR5K_PHY(13), + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY(14), + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b } }, + { AR5K_PHY(17), + { 0x1372169c, 0x137216a5, 0x137216a8, 0x1372169c } }, + { AR5K_PHY(18), + { 0x0018ba67, 0x0018ba67, 0x0018ba69, 0x0018ba69 } }, + { AR5K_PHY(20), + { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x31375d5e, 0x31375d5e, 0x313a5d5e, 0x31375d5e } }, + { AR5K_PHY_AGCCTL, + { 0x0000bd10, 0x0000bd10, 0x0000bd38, 0x0000bd10 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x00002710, 0x0000157c, 0x00002710 } }, + { AR5K_PHY(70), + { 0x00000190, 0x00000190, 0x00000084, 0x00000190 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0x6fe01020, 0x6fe01020, 0x6fe00920, 0x6fe01020 } }, + { AR5K_PHY_PCDAC_TXPOWER_BASE, + { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } }, + { AR5K_RF_BUFFER_CONTROL_4, + { 0x00000010, 0x00000014, 0x00000010, 0x00000010 } }, +}; + +/* Initial register settings for AR5212 */ +static const struct ath5k_ini ar5212_ini_common_start[] = { + { AR5K_RXDP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RXCFG, 0x00000005, AR5K_INI_WRITE }, + { AR5K_MIBC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TOPS, 0x00000008, AR5K_INI_WRITE }, + { AR5K_RXNOFRM, 0x00000008, AR5K_INI_WRITE }, + { AR5K_TXNOFRM, 0x00000010, AR5K_INI_WRITE }, + { AR5K_RPGTO, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RFCNT, 0x0000001f, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(1), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(2), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(3), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(4), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(5), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(6), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(7), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(8), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUEUE_TXDP(9), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_FP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TXP, 0x00000000, AR5K_INI_WRITE }, + /* Tx filter table 0 (32 entries) */ + { AR5K_DCU_TX_FILTER_0(0), 0x00000000, AR5K_INI_WRITE }, /* DCU 0 */ + { AR5K_DCU_TX_FILTER_0(1), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(2), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(3), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(4), 0x00000000, AR5K_INI_WRITE }, /* DCU 1 */ + { AR5K_DCU_TX_FILTER_0(5), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(6), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(7), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(8), 0x00000000, AR5K_INI_WRITE }, /* DCU 2 */ + { AR5K_DCU_TX_FILTER_0(9), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(10), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(11), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(12), 0x00000000, AR5K_INI_WRITE }, /* DCU 3 */ + { AR5K_DCU_TX_FILTER_0(13), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(14), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(15), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(16), 0x00000000, AR5K_INI_WRITE }, /* DCU 4 */ + { AR5K_DCU_TX_FILTER_0(17), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(18), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(19), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(20), 0x00000000, AR5K_INI_WRITE }, /* DCU 5 */ + { AR5K_DCU_TX_FILTER_0(21), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(22), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(23), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(24), 0x00000000, AR5K_INI_WRITE }, /* DCU 6 */ + { AR5K_DCU_TX_FILTER_0(25), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(26), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(27), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(28), 0x00000000, AR5K_INI_WRITE }, /* DCU 7 */ + { AR5K_DCU_TX_FILTER_0(29), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(30), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_0(31), 0x00000000, AR5K_INI_WRITE }, + /* Tx filter table 1 (16 entries) */ + { AR5K_DCU_TX_FILTER_1(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(1), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(2), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(3), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(4), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(5), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(6), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(7), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(8), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(9), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(10), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(11), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(12), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(13), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(14), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_1(15), 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_CLR, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_SET, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_CLR, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DCU_TX_FILTER_SET, 0x00000000, AR5K_INI_WRITE }, + { AR5K_STA_ID1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BSS_ID0, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BSS_ID1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BEACON_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_CFP_PERIOD_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TIMER0_5211, 0x00000030, AR5K_INI_WRITE }, + { AR5K_TIMER1_5211, 0x0007ffff, AR5K_INI_WRITE }, + { AR5K_TIMER2_5211, 0x01ffffff, AR5K_INI_WRITE }, + { AR5K_TIMER3_5211, 0x00000031, AR5K_INI_WRITE }, + { AR5K_CFP_DUR_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_RX_FILTER_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DIAG_SW_5211, 0x00000000, AR5K_INI_WRITE }, + { AR5K_ADDAC_TEST, 0x00000000, AR5K_INI_WRITE }, + { AR5K_DEFAULT_ANTENNA, 0x00000000, AR5K_INI_WRITE }, + { AR5K_FRAME_CTL_QOSM, 0x000fc78f, AR5K_INI_WRITE }, + { AR5K_XRMODE, 0x2a82301a, AR5K_INI_WRITE }, + { AR5K_XRDELAY, 0x05dc01e0, AR5K_INI_WRITE }, + { AR5K_XRTIMEOUT, 0x1f402710, AR5K_INI_WRITE }, + { AR5K_XRCHIRP, 0x01f40000, AR5K_INI_WRITE }, + { AR5K_XRSTOMP, 0x00001e1c, AR5K_INI_WRITE }, + { AR5K_SLEEP0, 0x0002aaaa, AR5K_INI_WRITE }, + { AR5K_SLEEP1, 0x02005555, AR5K_INI_WRITE }, + { AR5K_SLEEP2, 0x00000000, AR5K_INI_WRITE }, + { AR5K_BSS_IDM0, 0xffffffff, AR5K_INI_WRITE }, + { AR5K_BSS_IDM1, 0x0000ffff, AR5K_INI_WRITE }, + { AR5K_TXPC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PROFCNT_TX, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PROFCNT_RX, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PROFCNT_RXCLR, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PROFCNT_CYCLE, 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUIET_CTL1, 0x00000088, AR5K_INI_WRITE }, + /* Initial rate duration table (32 entries )*/ + { AR5K_RATE_DUR(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(1), 0x0000008c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(2), 0x000000e4, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(3), 0x000002d5, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(4), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(5), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(6), 0x000000a0, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(7), 0x000001c9, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(8), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(9), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(10), 0x00000030, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(11), 0x0000003c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(12), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(13), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(14), 0x00000030, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(15), 0x0000003c, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(16), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(17), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(18), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(19), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(20), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(21), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(22), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(23), 0x00000000, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(24), 0x000000d5, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(25), 0x000000df, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(26), 0x00000102, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(27), 0x0000013a, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(28), 0x00000075, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(29), 0x0000007f, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(30), 0x000000a2, AR5K_INI_WRITE }, + { AR5K_RATE_DUR(31), 0x00000000, AR5K_INI_WRITE }, + { AR5K_QUIET_CTL2, 0x00010002, AR5K_INI_WRITE }, + { AR5K_TSF_PARM, 0x00000001, AR5K_INI_WRITE }, + { AR5K_QOS_NOACK, 0x000000c0, AR5K_INI_WRITE }, + { AR5K_PHY_ERR_FIL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_XRLAT_TX, 0x00000168, AR5K_INI_WRITE }, + { AR5K_ACKSIFS, 0x00000000, AR5K_INI_WRITE }, + /* Rate -> db table + * notice ...03<-02<-01<-00 ! */ + { AR5K_RATE2DB(0), 0x03020100, AR5K_INI_WRITE }, + { AR5K_RATE2DB(1), 0x07060504, AR5K_INI_WRITE }, + { AR5K_RATE2DB(2), 0x0b0a0908, AR5K_INI_WRITE }, + { AR5K_RATE2DB(3), 0x0f0e0d0c, AR5K_INI_WRITE }, + { AR5K_RATE2DB(4), 0x13121110, AR5K_INI_WRITE }, + { AR5K_RATE2DB(5), 0x17161514, AR5K_INI_WRITE }, + { AR5K_RATE2DB(6), 0x1b1a1918, AR5K_INI_WRITE }, + { AR5K_RATE2DB(7), 0x1f1e1d1c, AR5K_INI_WRITE }, + /* Db -> Rate table */ + { AR5K_DB2RATE(0), 0x03020100, AR5K_INI_WRITE }, + { AR5K_DB2RATE(1), 0x07060504, AR5K_INI_WRITE }, + { AR5K_DB2RATE(2), 0x0b0a0908, AR5K_INI_WRITE }, + { AR5K_DB2RATE(3), 0x0f0e0d0c, AR5K_INI_WRITE }, + { AR5K_DB2RATE(4), 0x13121110, AR5K_INI_WRITE }, + { AR5K_DB2RATE(5), 0x17161514, AR5K_INI_WRITE }, + { AR5K_DB2RATE(6), 0x1b1a1918, AR5K_INI_WRITE }, + { AR5K_DB2RATE(7), 0x1f1e1d1c, AR5K_INI_WRITE }, + /* PHY registers (Common settings + * for all chips/modes) */ + { AR5K_PHY(3), 0xad848e19, AR5K_INI_WRITE }, + { AR5K_PHY(4), 0x7d28e000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_3, 0x9c0a9f6b, AR5K_INI_WRITE }, + { AR5K_PHY_ACT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY(16), 0x206a017a, AR5K_INI_WRITE }, + { AR5K_PHY(21), 0x00000859, AR5K_INI_WRITE }, + { AR5K_PHY_BIN_MASK_1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_BIN_MASK_2, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_BIN_MASK_3, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_BIN_MASK_CTL, 0x00800000, AR5K_INI_WRITE }, + { AR5K_PHY_ANT_CTL, 0x00000001, AR5K_INI_WRITE }, + /*{ AR5K_PHY(71), 0x0000092a, AR5K_INI_WRITE },*/ /* Old value */ + { AR5K_PHY_MAX_RX_LEN, 0x00000c80, AR5K_INI_WRITE }, + { AR5K_PHY_IQ, 0x05100000, AR5K_INI_WRITE }, + { AR5K_PHY_WARM_RESET, 0x00000001, AR5K_INI_WRITE }, + { AR5K_PHY_CTL, 0x00000004, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE1, 0x1e1f2022, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE2, 0x0a0b0c0d, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE_MAX, 0x0000003f, AR5K_INI_WRITE }, + { AR5K_PHY(82), 0x9280b212, AR5K_INI_WRITE }, + { AR5K_PHY_RADAR, 0x5d50e188, AR5K_INI_WRITE }, + /*{ AR5K_PHY(86), 0x000000ff, AR5K_INI_WRITE },*/ + { AR5K_PHY(87), 0x004b6a8e, AR5K_INI_WRITE }, + { AR5K_PHY_NFTHRES, 0x000003ce, AR5K_INI_WRITE }, + { AR5K_PHY_RESTART, 0x192fb515, AR5K_INI_WRITE }, + { AR5K_PHY(94), 0x00000001, AR5K_INI_WRITE }, + { AR5K_PHY_RFBUS_REQ, 0x00000000, AR5K_INI_WRITE }, + /*{ AR5K_PHY(644), 0x0080a333, AR5K_INI_WRITE },*/ /* Old value */ + /*{ AR5K_PHY(645), 0x00206c10, AR5K_INI_WRITE },*/ /* Old value */ + { AR5K_PHY(644), 0x00806333, AR5K_INI_WRITE }, + { AR5K_PHY(645), 0x00106c10, AR5K_INI_WRITE }, + { AR5K_PHY(646), 0x009c4060, AR5K_INI_WRITE }, + /* { AR5K_PHY(647), 0x1483800a, AR5K_INI_WRITE }, */ + /* { AR5K_PHY(648), 0x01831061, AR5K_INI_WRITE }, */ /* Old value */ + { AR5K_PHY(648), 0x018830c6, AR5K_INI_WRITE }, + { AR5K_PHY(649), 0x00000400, AR5K_INI_WRITE }, + /*{ AR5K_PHY(650), 0x000001b5, AR5K_INI_WRITE },*/ + { AR5K_PHY(651), 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE3, 0x20202020, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE2, 0x20202020, AR5K_INI_WRITE }, + /*{ AR5K_PHY(655), 0x13c889af, AR5K_INI_WRITE },*/ + { AR5K_PHY(656), 0x38490a20, AR5K_INI_WRITE }, + { AR5K_PHY(657), 0x00007bb6, AR5K_INI_WRITE }, + { AR5K_PHY(658), 0x0fff3ffc, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */ +static const struct ath5k_ini_mode ar5212_ini_mode_start[] = { + { AR5K_QUEUE_DFS_LOCAL_IFS(0), + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(1), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(2), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(3), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(4), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(5), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(6), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(7), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(8), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_QUEUE_DFS_LOCAL_IFS(9), + { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } }, + { AR5K_DCU_GBL_IFS_SIFS, + { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } }, + { AR5K_DCU_GBL_IFS_SLOT, + { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } }, + { AR5K_DCU_GBL_IFS_EIFS, + { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } }, + { AR5K_DCU_GBL_IFS_MISC, + { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } }, + { AR5K_TIME_OUT, + { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } }, + { AR5K_PHY_TURBO, + { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } }, + { AR5K_PHY(8), + { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } }, + { AR5K_PHY_RF_CTL2, + { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_SETTLING, + { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } }, + { AR5K_PHY_AGCCTL, + { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d10 } }, + { AR5K_PHY_NF, + { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } }, + { AR5K_PHY_WEAK_OFDM_HIGH_THR, + { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } }, + { AR5K_PHY(70), + { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } }, + { AR5K_PHY_OFDM_SELFCORR, + { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } }, + { 0xa230, + { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } }, +}; + +/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5111_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } }, + { AR5K_PHY_RX_DELAY, + { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, +}; + +static const struct ath5k_ini rf5111_ini_common_end[] = { + { AR5K_DCU_FP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_ADC_CTL, 0x00022ffe, AR5K_INI_WRITE }, + { 0x983c, 0x00020100, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_OFFSET, 0x1284613c, AR5K_INI_WRITE }, + { AR5K_PHY_PAPD_PROBE, 0x00004883, AR5K_INI_WRITE }, + { 0x9940, 0x00000004, AR5K_INI_WRITE }, + { 0x9958, 0x000000ff, AR5K_INI_WRITE }, + { 0x9974, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_SPENDING, 0x00000018, AR5K_INI_WRITE }, + { AR5K_PHY_CCKTXCTL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_CCK_CROSSCORR, 0xd03e6788, AR5K_INI_WRITE }, + { AR5K_PHY_DAG_CCK_CTL, 0x000001b5, AR5K_INI_WRITE }, + { 0xa23c, 0x13c889af, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5112_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } }, +}; + +static const struct ath5k_ini rf5112_ini_common_end[] = { + { AR5K_DCU_FP, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_ADC_CTL, 0x00022ffe, AR5K_INI_WRITE }, + { 0x983c, 0x00020100, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_OFFSET, 0x1284613c, AR5K_INI_WRITE }, + { AR5K_PHY_PAPD_PROBE, 0x00004882, AR5K_INI_WRITE }, + { 0x9940, 0x00000004, AR5K_INI_WRITE }, + { 0x9958, 0x000000ff, AR5K_INI_WRITE }, + { 0x9974, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_DAG_CCK_CTL, 0x000001b5, AR5K_INI_WRITE }, + { 0xa23c, 0x13c889af, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */ +static const struct ath5k_ini_mode rf5413_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_GAIN, + { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0xa300, + { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } }, + { 0xa304, + { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } }, + { 0xa308, + { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } }, + { 0xa30c, + { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } }, + { 0xa310, + { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } }, + { 0xa314, + { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } }, + { 0xa318, + { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } }, + { 0xa31c, + { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } }, + { 0xa320, + { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } }, + { 0xa324, + { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } }, + { 0xa328, + { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } }, + { 0xa32c, + { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } }, + { 0xa330, + { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } }, + { 0xa334, + { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } }, +}; + +static const struct ath5k_ini rf5413_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0, AR5K_INI_WRITE }, + { AR5K_5414_CBCFG, 0x00000010, AR5K_INI_WRITE }, + { AR5K_SEQ_MASK, 0x0000000f, AR5K_INI_WRITE }, + { 0x809c, 0x00000000, AR5K_INI_WRITE }, + { 0x80a0, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_CTL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_SEL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MISC_MODE, 0x00000000, AR5K_INI_WRITE }, + { AR5K_OFDM_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_CCK_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TSF_THRES, 0x00000000, AR5K_INI_WRITE }, + { 0x8140, 0x800003f9, AR5K_INI_WRITE }, + { 0x8144, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_ADC_CTL, 0x0000a000, AR5K_INI_WRITE }, + { 0x983c, 0x00200400, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c, AR5K_INI_WRITE }, + { AR5K_PHY_SCR, 0x0000001f, AR5K_INI_WRITE }, + { AR5K_PHY_SLMT, 0x00000080, AR5K_INI_WRITE }, + { AR5K_PHY_SCAL, 0x0000000e, AR5K_INI_WRITE }, + { 0x9958, 0x00081fff, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_7, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_8, 0x02800000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_11, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000, AR5K_INI_WRITE }, + { 0x99e4, 0xaaaaaaaa, AR5K_INI_WRITE }, + { 0x99e8, 0x3c466478, AR5K_INI_WRITE }, + { 0x99ec, 0x000000aa, AR5K_INI_WRITE }, + { AR5K_PHY_SCLOCK, 0x0000000c, AR5K_INI_WRITE }, + { AR5K_PHY_SDELAY, 0x000000ff, AR5K_INI_WRITE }, + { AR5K_PHY_SPENDING, 0x00000014, AR5K_INI_WRITE }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5, AR5K_INI_WRITE }, + { 0xa23c, 0x93c889af, AR5K_INI_WRITE }, + { AR5K_PHY_FAST_ADC, 0x00000001, AR5K_INI_WRITE }, + { 0xa250, 0x0000a000, AR5K_INI_WRITE }, + { AR5K_PHY_BLUETOOTH, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG1, 0x0cc75380, AR5K_INI_WRITE }, + { 0xa25c, 0x0f0f0f01, AR5K_INI_WRITE }, + { 0xa260, 0x5f690f01, AR5K_INI_WRITE }, + { 0xa264, 0x00418a11, AR5K_INI_WRITE }, + { 0xa268, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG5, 0x0c30c16a, AR5K_INI_WRITE }, + { 0xa270, 0x00820820, AR5K_INI_WRITE }, + { 0xa274, 0x081b7caa, AR5K_INI_WRITE }, + { 0xa278, 0x1ce739ce, AR5K_INI_WRITE }, + { 0xa27c, 0x051701ce, AR5K_INI_WRITE }, + { 0xa338, 0x00000000, AR5K_INI_WRITE }, + { 0xa33c, 0x00000000, AR5K_INI_WRITE }, + { 0xa340, 0x00000000, AR5K_INI_WRITE }, + { 0xa344, 0x00000000, AR5K_INI_WRITE }, + { 0xa348, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa34c, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa350, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa354, 0x0003ffff, AR5K_INI_WRITE }, + { 0xa358, 0x79a8aa1f, AR5K_INI_WRITE }, + { 0xa35c, 0x066c420f, AR5K_INI_WRITE }, + { 0xa360, 0x0f282207, AR5K_INI_WRITE }, + { 0xa364, 0x17601685, AR5K_INI_WRITE }, + { 0xa368, 0x1f801104, AR5K_INI_WRITE }, + { 0xa36c, 0x37a00c03, AR5K_INI_WRITE }, + { 0xa370, 0x3fc40883, AR5K_INI_WRITE }, + { 0xa374, 0x57c00803, AR5K_INI_WRITE }, + { 0xa378, 0x5fd80682, AR5K_INI_WRITE }, + { 0xa37c, 0x7fe00482, AR5K_INI_WRITE }, + { 0xa380, 0x7f3c7bba, AR5K_INI_WRITE }, + { 0xa384, 0xf3307ff0, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */ +/* XXX: a mode ? */ +static const struct ath5k_ini_mode rf2413_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x0a020001, 0x05020000, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00 } }, + { AR5K_PHY_PA_CTL, + { 0x00000002, 0x00000002, 0x0000000a, 0x0000000a, 0x0000000a } }, + { AR5K_PHY_GAIN, + { 0x0018da6d, 0x0018da6d, 0x001a6a64, 0x001a6a64, 0x001a6a64 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da, 0x0de8b0da } }, + { AR5K_PHY_SIG, + { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e, 0x7e800d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3137665e, 0x3137665e, 0x3137665e, 0x3139605e, 0x3137665e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x002c0140, 0x002c0140, 0x0042c140, 0x0042c140, 0x0042c140 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, +}; + +static const struct ath5k_ini rf2413_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0, AR5K_INI_WRITE }, + { AR5K_SEQ_MASK, 0x0000000f, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_CTL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_SEL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MISC_MODE, 0x00000000, AR5K_INI_WRITE }, + { AR5K_OFDM_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_CCK_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TSF_THRES, 0x00000000, AR5K_INI_WRITE }, + { 0x8140, 0x800000a8, AR5K_INI_WRITE }, + { 0x8144, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_ADC_CTL, 0x0000a000, AR5K_INI_WRITE }, + { 0x983c, 0x00200400, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c, AR5K_INI_WRITE }, + { AR5K_PHY_SCR, 0x0000001f, AR5K_INI_WRITE }, + { AR5K_PHY_SLMT, 0x00000080, AR5K_INI_WRITE }, + { AR5K_PHY_SCAL, 0x0000000e, AR5K_INI_WRITE }, + { 0x9958, 0x000000ff, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_7, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_8, 0x02800000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_11, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000, AR5K_INI_WRITE }, + { 0x99e4, 0xaaaaaaaa, AR5K_INI_WRITE }, + { 0x99e8, 0x3c466478, AR5K_INI_WRITE }, + { 0x99ec, 0x000000aa, AR5K_INI_WRITE }, + { AR5K_PHY_SCLOCK, 0x0000000c, AR5K_INI_WRITE }, + { AR5K_PHY_SDELAY, 0x000000ff, AR5K_INI_WRITE }, + { AR5K_PHY_SPENDING, 0x00000014, AR5K_INI_WRITE }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5, AR5K_INI_WRITE }, + { 0xa23c, 0x93c889af, AR5K_INI_WRITE }, + { AR5K_PHY_FAST_ADC, 0x00000001, AR5K_INI_WRITE }, + { 0xa250, 0x0000a000, AR5K_INI_WRITE }, + { AR5K_PHY_BLUETOOTH, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG1, 0x0cc75380, AR5K_INI_WRITE }, + { 0xa25c, 0x0f0f0f01, AR5K_INI_WRITE }, + { 0xa260, 0x5f690f01, AR5K_INI_WRITE }, + { 0xa264, 0x00418a11, AR5K_INI_WRITE }, + { 0xa268, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG5, 0x0c30c16a, AR5K_INI_WRITE }, + { 0xa270, 0x00820820, AR5K_INI_WRITE }, + { 0xa274, 0x001b7caa, AR5K_INI_WRITE }, + { 0xa278, 0x1ce739ce, AR5K_INI_WRITE }, + { 0xa27c, 0x051701ce, AR5K_INI_WRITE }, + { 0xa300, 0x18010000, AR5K_INI_WRITE }, + { 0xa304, 0x30032602, AR5K_INI_WRITE }, + { 0xa308, 0x48073e06, AR5K_INI_WRITE }, + { 0xa30c, 0x560b4c0a, AR5K_INI_WRITE }, + { 0xa310, 0x641a600f, AR5K_INI_WRITE }, + { 0xa314, 0x784f6e1b, AR5K_INI_WRITE }, + { 0xa318, 0x868f7c5a, AR5K_INI_WRITE }, + { 0xa31c, 0x8ecf865b, AR5K_INI_WRITE }, + { 0xa320, 0x9d4f970f, AR5K_INI_WRITE }, + { 0xa324, 0xa5cfa18f, AR5K_INI_WRITE }, + { 0xa328, 0xb55faf1f, AR5K_INI_WRITE }, + { 0xa32c, 0xbddfb99f, AR5K_INI_WRITE }, + { 0xa330, 0xcd7fc73f, AR5K_INI_WRITE }, + { 0xa334, 0xd5ffd1bf, AR5K_INI_WRITE }, + { 0xa338, 0x00000000, AR5K_INI_WRITE }, + { 0xa33c, 0x00000000, AR5K_INI_WRITE }, + { 0xa340, 0x00000000, AR5K_INI_WRITE }, + { 0xa344, 0x00000000, AR5K_INI_WRITE }, + { 0xa348, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa34c, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa350, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa354, 0x0003ffff, AR5K_INI_WRITE }, + { 0xa358, 0x79a8aa1f, AR5K_INI_WRITE }, + { 0xa35c, 0x066c420f, AR5K_INI_WRITE }, + { 0xa360, 0x0f282207, AR5K_INI_WRITE }, + { 0xa364, 0x17601685, AR5K_INI_WRITE }, + { 0xa368, 0x1f801104, AR5K_INI_WRITE }, + { 0xa36c, 0x37a00c03, AR5K_INI_WRITE }, + { 0xa370, 0x3fc40883, AR5K_INI_WRITE }, + { 0xa374, 0x57c00803, AR5K_INI_WRITE }, + { 0xa378, 0x5fd80682, AR5K_INI_WRITE }, + { 0xa37c, 0x7fe00482, AR5K_INI_WRITE }, + { 0xa380, 0x7f3c7bba, AR5K_INI_WRITE }, + { 0xa384, 0xf3307ff0, AR5K_INI_WRITE }, +}; + +/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */ +/* XXX: a mode ? */ +static const struct ath5k_ini_mode rf2425_ini_mode_end[] = { + { AR5K_TXCFG, + /* a/XR aTurbo b g (DYN) gTurbo */ + { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } }, + { AR5K_USEC_5211, + { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } }, + { AR5K_PHY_TURBO, + { 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000001 } }, + { AR5K_PHY_RF_CTL3, + { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } }, + { AR5K_PHY_RF_CTL4, + { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } }, + { AR5K_PHY_PA_CTL, + { 0x00000003, 0x00000003, 0x0000000b, 0x0000000b, 0x0000000b } }, + { AR5K_PHY_SETTLING, + { 0x1372161c, 0x13721c25, 0x13721722, 0x13721422, 0x13721c25 } }, + { AR5K_PHY_GAIN, + { 0x0018fa61, 0x0018fa61, 0x00199a65, 0x00199a65, 0x00199a65 } }, + { AR5K_PHY_DESIRED_SIZE, + { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } }, + { AR5K_PHY_SIG, + { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } }, + { AR5K_PHY_AGCCOARSE, + { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } }, + { AR5K_PHY_WEAK_OFDM_LOW_THR, + { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } }, + { AR5K_PHY_RX_DELAY, + { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } }, + { AR5K_PHY_FRAME_CTL_5211, + { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } }, + { AR5K_PHY_CCKTXCTL, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { AR5K_PHY_CCK_CROSSCORR, + { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } }, + { AR5K_PHY_GAIN_2GHZ, + { 0x00000140, 0x00000140, 0x0052c140, 0x0052c140, 0x0052c140 } }, + { AR5K_PHY_CCK_RX_CTL_4, + { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } }, + { 0xa324, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa328, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa32c, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa330, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, + { 0xa334, + { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } }, +}; + +static const struct ath5k_ini rf2425_ini_common_end[] = { + { AR5K_DCU_FP, 0x000003e0, AR5K_INI_WRITE }, + { AR5K_SEQ_MASK, 0x0000000f, AR5K_INI_WRITE }, + { 0x809c, 0x00000000, AR5K_INI_WRITE }, + { 0x80a0, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_CTL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MIC_QOS_SEL, 0x00000000, AR5K_INI_WRITE }, + { AR5K_MISC_MODE, 0x00000000, AR5K_INI_WRITE }, + { AR5K_OFDM_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_CCK_FIL_CNT, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT1_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHYERR_CNT2_MASK, 0x00000000, AR5K_INI_WRITE }, + { AR5K_TSF_THRES, 0x00000000, AR5K_INI_WRITE }, + { 0x8140, 0x800003f9, AR5K_INI_WRITE }, + { 0x8144, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_AGC, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_ADC_CTL, 0x0000a000, AR5K_INI_WRITE }, + { 0x983c, 0x00200400, AR5K_INI_WRITE }, + { AR5K_PHY_GAIN_OFFSET, 0x1284233c, AR5K_INI_WRITE }, + { AR5K_PHY_SCR, 0x0000001f, AR5K_INI_WRITE }, + { AR5K_PHY_SLMT, 0x00000080, AR5K_INI_WRITE }, + { AR5K_PHY_SCAL, 0x0000000e, AR5K_INI_WRITE }, + { 0x9958, 0x00081fff, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_7, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_8, 0x02800000, AR5K_INI_WRITE }, + { AR5K_PHY_TIMING_11, 0x00000000, AR5K_INI_WRITE }, + { 0x99dc, 0xfebadbe8, AR5K_INI_WRITE }, + { AR5K_PHY_HEAVY_CLIP_ENABLE, 0x00000000, AR5K_INI_WRITE }, + { 0x99e4, 0xaaaaaaaa, AR5K_INI_WRITE }, + { 0x99e8, 0x3c466478, AR5K_INI_WRITE }, + { 0x99ec, 0x000000aa, AR5K_INI_WRITE }, + { AR5K_PHY_SCLOCK, 0x0000000c, AR5K_INI_WRITE }, + { AR5K_PHY_SDELAY, 0x000000ff, AR5K_INI_WRITE }, + { AR5K_PHY_SPENDING, 0x00000014, AR5K_INI_WRITE }, + { AR5K_PHY_DAG_CCK_CTL, 0x000009b5, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE3, 0x20202020, AR5K_INI_WRITE }, + { AR5K_PHY_TXPOWER_RATE4, 0x20202020, AR5K_INI_WRITE }, + { 0xa23c, 0x93c889af, AR5K_INI_WRITE }, + { AR5K_PHY_FAST_ADC, 0x00000001, AR5K_INI_WRITE }, + { 0xa250, 0x0000a000, AR5K_INI_WRITE }, + { AR5K_PHY_BLUETOOTH, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG1, 0x0cc75380, AR5K_INI_WRITE }, + { 0xa25c, 0x0f0f0f01, AR5K_INI_WRITE }, + { 0xa260, 0x5f690f01, AR5K_INI_WRITE }, + { 0xa264, 0x00418a11, AR5K_INI_WRITE }, + { 0xa268, 0x00000000, AR5K_INI_WRITE }, + { AR5K_PHY_TPC_RG5, 0x0c30c166, AR5K_INI_WRITE }, + { 0xa270, 0x00820820, AR5K_INI_WRITE }, + { 0xa274, 0x081a3caa, AR5K_INI_WRITE }, + { 0xa278, 0x1ce739ce, AR5K_INI_WRITE }, + { 0xa27c, 0x051701ce, AR5K_INI_WRITE }, + { 0xa300, 0x16010000, AR5K_INI_WRITE }, + { 0xa304, 0x2c032402, AR5K_INI_WRITE }, + { 0xa308, 0x48433e42, AR5K_INI_WRITE }, + { 0xa30c, 0x5a0f500b, AR5K_INI_WRITE }, + { 0xa310, 0x6c4b624a, AR5K_INI_WRITE }, + { 0xa314, 0x7e8b748a, AR5K_INI_WRITE }, + { 0xa318, 0x96cf8ccb, AR5K_INI_WRITE }, + { 0xa31c, 0xa34f9d0f, AR5K_INI_WRITE }, + { 0xa320, 0xa7cfa58f, AR5K_INI_WRITE }, + { 0xa348, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa34c, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa350, 0x3fffffff, AR5K_INI_WRITE }, + { 0xa354, 0x0003ffff, AR5K_INI_WRITE }, + { 0xa358, 0x79a8aa1f, AR5K_INI_WRITE }, + { 0xa35c, 0x066c420f, AR5K_INI_WRITE }, + { 0xa360, 0x0f282207, AR5K_INI_WRITE }, + { 0xa364, 0x17601685, AR5K_INI_WRITE }, + { 0xa368, 0x1f801104, AR5K_INI_WRITE }, + { 0xa36c, 0x37a00c03, AR5K_INI_WRITE }, + { 0xa370, 0x3fc40883, AR5K_INI_WRITE }, + { 0xa374, 0x57c00803, AR5K_INI_WRITE }, + { 0xa378, 0x5fd80682, AR5K_INI_WRITE }, + { 0xa37c, 0x7fe00482, AR5K_INI_WRITE }, + { 0xa380, 0x7f3c7bba, AR5K_INI_WRITE }, + { 0xa384, 0xf3307ff0, AR5K_INI_WRITE }, +}; + +/* + * Initial BaseBand Gain settings for RF5111/5112 (AR5210 comes with + * RF5110 only so initial BB Gain settings are included in AR5K_AR5210_INI) + */ + +/* RF5111 Initial BaseBand Gain settings */ +static const struct ath5k_ini rf5111_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(1), 0x00000020, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(2), 0x00000010, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(3), 0x00000030, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(4), 0x00000008, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(5), 0x00000028, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(6), 0x00000004, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(7), 0x00000024, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(8), 0x00000014, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(9), 0x00000034, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(10), 0x0000000c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(11), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(12), 0x00000002, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(13), 0x00000022, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(14), 0x00000012, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(15), 0x00000032, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(16), 0x0000000a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(17), 0x0000002a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(18), 0x00000006, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(19), 0x00000026, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(20), 0x00000016, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(21), 0x00000036, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(22), 0x0000000e, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(23), 0x0000002e, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(24), 0x00000001, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(25), 0x00000021, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(26), 0x00000011, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(27), 0x00000031, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(28), 0x00000009, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(29), 0x00000029, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(30), 0x00000005, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(31), 0x00000025, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(32), 0x00000015, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(33), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(34), 0x0000000d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(35), 0x0000002d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(36), 0x00000003, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(37), 0x00000023, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(38), 0x00000013, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(39), 0x00000033, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(40), 0x0000000b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(41), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(42), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(43), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(44), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(45), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(46), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(47), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(48), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(49), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(50), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(51), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(52), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(53), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(54), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(55), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(56), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(57), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(58), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(59), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(60), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(61), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(62), 0x00000002, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(63), 0x00000016, AR5K_INI_WRITE }, +}; + +/* RF5112 Initial BaseBand Gain settings (Same for RF5413/5414+) */ +static const struct ath5k_ini rf5112_ini_bbgain[] = { + { AR5K_BB_GAIN(0), 0x00000000, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(1), 0x00000001, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(2), 0x00000002, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(3), 0x00000003, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(4), 0x00000004, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(5), 0x00000005, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(6), 0x00000008, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(7), 0x00000009, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(8), 0x0000000a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(9), 0x0000000b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(10), 0x0000000c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(11), 0x0000000d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(12), 0x00000010, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(13), 0x00000011, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(14), 0x00000012, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(15), 0x00000013, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(16), 0x00000014, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(17), 0x00000015, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(18), 0x00000018, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(19), 0x00000019, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(20), 0x0000001a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(21), 0x0000001b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(22), 0x0000001c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(23), 0x0000001d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(24), 0x00000020, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(25), 0x00000021, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(26), 0x00000022, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(27), 0x00000023, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(28), 0x00000024, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(29), 0x00000025, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(30), 0x00000028, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(31), 0x00000029, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(32), 0x0000002a, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(33), 0x0000002b, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(34), 0x0000002c, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(35), 0x0000002d, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(36), 0x00000030, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(37), 0x00000031, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(38), 0x00000032, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(39), 0x00000033, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(40), 0x00000034, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(41), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(42), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(43), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(44), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(45), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(46), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(47), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(48), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(49), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(50), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(51), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(52), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(53), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(54), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(55), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(56), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(57), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(58), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(59), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(60), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(61), 0x00000035, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(62), 0x00000010, AR5K_INI_WRITE }, + { AR5K_BB_GAIN(63), 0x0000001a, AR5K_INI_WRITE }, +}; + + +/* + * Write initial register dump + */ +static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size, + const struct ath5k_ini *ini_regs, int change_channel) +{ + unsigned int i; + + /* Write initial registers */ + for (i = 0; i < size; i++) { + /* On channel change there is + * no need to mess with PCU */ + if (change_channel && + ini_regs[i].ini_register >= AR5K_PCU_MIN && + ini_regs[i].ini_register <= AR5K_PCU_MAX) + continue; + + switch (ini_regs[i].ini_mode) { + case AR5K_INI_READ: + /* Cleared on read */ + ath5k_hw_reg_read(ah, ini_regs[i].ini_register); + break; + case AR5K_INI_WRITE: + default: + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_regs[i].ini_value, + ini_regs[i].ini_register); + } + } +} + +static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah, + unsigned int size, const struct ath5k_ini_mode *ini_mode, + u8 mode) +{ + unsigned int i; + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ini_mode[i].mode_value[mode], + (u32)ini_mode[i].mode_register); + } +} + +int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, int change_channel) +{ + /* + * Write initial register settings + */ + + /* For AR5212 and combatible */ + if (ah->ah_version == AR5K_AR5212) { + + /* First set of mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(ar5212_ini_mode_start), + ar5212_ini_mode_start, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start), + ar5212_ini_common_start, change_channel); + + /* Second set of mode-specific settings */ + switch (ah->ah_radio) { + case AR5K_RF5111: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5111_ini_mode_end), + rf5111_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5111_ini_common_end), + rf5111_ini_common_end, change_channel); + + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, change_channel); + + break; + case AR5K_RF5112: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5112_ini_mode_end), + rf5112_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_common_end), + rf5112_ini_common_end, change_channel); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + + break; + case AR5K_RF5413: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf5413_ini_mode_end), + rf5413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5413_ini_common_end), + rf5413_ini_common_end, change_channel); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + + break; + case AR5K_RF2316: + case AR5K_RF2413: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2413_ini_mode_end), + rf2413_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2413_ini_common_end), + rf2413_ini_common_end, change_channel); + + /* Override settings from rf2413_ini_common_end */ + if (ah->ah_radio == AR5K_RF2316) { + ath5k_hw_reg_write(ah, 0x00004000, + AR5K_PHY_AGC); + ath5k_hw_reg_write(ah, 0x081b7caa, + 0xa274); + } + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + break; + case AR5K_RF2317: + case AR5K_RF2425: + + ath5k_hw_ini_mode_registers(ah, + ARRAY_SIZE(rf2425_ini_mode_end), + rf2425_ini_mode_end, mode); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf2425_ini_common_end), + rf2425_ini_common_end, change_channel); + + ath5k_hw_ini_registers(ah, + ARRAY_SIZE(rf5112_ini_bbgain), + rf5112_ini_bbgain, change_channel); + break; + default: + return -EINVAL; + + } + + /* For AR5211 */ + } else if (ah->ah_version == AR5K_AR5211) { + + /* AR5K_MODE_11B */ + if (mode > 2) { + DBG("ath5k: unsupported channel mode %d\n", mode); + return -EINVAL; + } + + /* Mode-specific settings */ + ath5k_hw_ini_mode_registers(ah, ARRAY_SIZE(ar5211_ini_mode), + ar5211_ini_mode, mode); + + /* + * Write initial settings common for all modes + */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini), + ar5211_ini, change_channel); + + /* AR5211 only comes with 5111 */ + + /* Baseband gain table */ + ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain), + rf5111_ini_bbgain, change_channel); + /* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */ + } else if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini), + ar5210_ini, change_channel); + } + + return 0; +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_pcu.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_pcu.c new file mode 100644 index 000000000..c8165da79 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_pcu.c @@ -0,0 +1,534 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Matthew W. S. Bell <mentor@madwifi.org> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/*********************************\ +* Protocol Control Unit Functions * +\*********************************/ + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/*******************\ +* Generic functions * +\*******************/ + +/** + * ath5k_hw_set_opmode - Set PCU operating mode + * + * @ah: The &struct ath5k_hw + * + * Initialize PCU for the various operating modes (AP/STA etc) + * + * For iPXE we always assume STA mode. + */ +int ath5k_hw_set_opmode(struct ath5k_hw *ah) +{ + u32 pcu_reg, beacon_reg, low_id, high_id; + + + /* Preserve rest settings */ + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP + | AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + (AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0)); + + beacon_reg = 0; + + pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE + | (ah->ah_version == AR5K_AR5210 ? + AR5K_STA_ID1_PWR_SV : 0); + + /* + * Set PCU registers + */ + low_id = AR5K_LOW_ID(ah->ah_sta_id); + high_id = AR5K_HIGH_ID(ah->ah_sta_id); + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + /* + * Set Beacon Control Register on 5210 + */ + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR); + + return 0; +} + +/** + * ath5k_hw_set_ack_bitrate - set bitrate for ACKs + * + * @ah: The &struct ath5k_hw + * @high: Flag to determine if we want to use high transmition rate + * for ACKs or not + * + * If high flag is set, we tell hw to use a set of control rates based on + * the current transmition rate (check out control_rates array inside reset.c). + * If not hw just uses the lowest rate available for the current modulation + * scheme being used (1Mbit for CCK and 6Mbits for OFDM). + */ +void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, int high) +{ + if (ah->ah_version != AR5K_AR5212) + return; + else { + u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB; + if (high) + AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val); + } +} + + +/******************\ +* ACK/CTS Timeouts * +\******************/ + +/** + * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah) +{ + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo); +} + +/** + * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + +/** + * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec + * + * @ah: The &struct ath5k_hw + */ +unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah) +{ + return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah, + AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo); +} + +/** + * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU + * + * @ah: The &struct ath5k_hw + * @timeout: Timeout in usec + */ +int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +{ + if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS), + ah->ah_turbo) <= timeout) + return -EINVAL; + + AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS, + ath5k_hw_htoclock(timeout, ah->ah_turbo)); + + return 0; +} + + +/****************\ +* BSSID handling * +\****************/ + +/** + * ath5k_hw_get_lladdr - Get station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Initialize ah->ah_sta_id using the mac address provided + * (just a memcpy). + * + * TODO: Remove it once we merge ath5k_softc and ath5k_hw + */ +void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac) +{ + memcpy(mac, ah->ah_sta_id, ETH_ALEN); +} + +/** + * ath5k_hw_set_lladdr - Set station id + * + * @ah: The &struct ath5k_hw + * @mac: The card's mac address + * + * Set station id on hw using the provided mac address + */ +int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +{ + u32 low_id, high_id; + u32 pcu_reg; + + /* Set new station ID */ + memcpy(ah->ah_sta_id, mac, ETH_ALEN); + + pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000; + + low_id = AR5K_LOW_ID(mac); + high_id = AR5K_HIGH_ID(mac); + + ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0); + ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1); + + return 0; +} + +/** + * ath5k_hw_set_associd - Set BSSID for association + * + * @ah: The &struct ath5k_hw + * @bssid: BSSID + * @assoc_id: Assoc id + * + * Sets the BSSID which trigers the "SME Join" operation + */ +void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id) +{ + u32 low_id, high_id; + + /* + * Set simple BSSID mask on 5212 + */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask), + AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask), + AR5K_BSS_IDM1); + } + + /* + * Set BSSID which triggers the "SME Join" operation + */ + low_id = AR5K_LOW_ID(bssid); + high_id = AR5K_HIGH_ID(bssid); + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0); + ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) << + AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1); +} + +/** + * ath5k_hw_set_bssid_mask - filter out bssids we listen + * + * @ah: the &struct ath5k_hw + * @mask: the bssid_mask, a u8 array of size ETH_ALEN + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * NOTE: This is a simple filter and does *not* filter out all + * relevant frames. Some frames that are not for us might get ACKed from us + * by PCU because they just match the mask. + * + * When handling multiple BSSes you can get the BSSID mask by computing the + * set of ~ ( MAC XOR BSSID ) for all bssids we handle. + * + * When you do this you are essentially computing the common bits of all your + * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with + * the MAC address to obtain the relevant bits and compare the result with + * (frame's BSSID & mask) to see if they match. + */ +/* + * Simple example: on your card you have have two BSSes you have created with + * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address. + * There is another BSSID-03 but you are not part of it. For simplicity's sake, + * assuming only 4 bits for a mac address and for BSSIDs you can then have: + * + * \ + * MAC: 0001 | + * BSSID-01: 0100 | --> Belongs to us + * BSSID-02: 1001 | + * / + * ------------------- + * BSSID-03: 0110 | --> External + * ------------------- + * + * Our bssid_mask would then be: + * + * On loop iteration for BSSID-01: + * ~(0001 ^ 0100) -> ~(0101) + * -> 1010 + * bssid_mask = 1010 + * + * On loop iteration for BSSID-02: + * bssid_mask &= ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(0001 ^ 1001) + * bssid_mask = (1010) & ~(1001) + * bssid_mask = (1010) & (0110) + * bssid_mask = 0010 + * + * A bssid_mask of 0010 means "only pay attention to the second least + * significant bit". This is because its the only bit common + * amongst the MAC and all BSSIDs we support. To findout what the real + * common bit is we can simply "&" the bssid_mask now with any BSSID we have + * or our MAC address (we assume the hardware uses the MAC address). + * + * Now, suppose there's an incoming frame for BSSID-03: + * + * IFRAME-01: 0110 + * + * An easy eye-inspeciton of this already should tell you that this frame + * will not pass our check. This is beacuse the bssid_mask tells the + * hardware to only look at the second least significant bit and the + * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB + * as 1, which does not match 0. + * + * So with IFRAME-01 we *assume* the hardware will do: + * + * allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0; + * --> allow = (0010) == 0000 ? 1 : 0; + * --> allow = 0 + * + * Lets now test a frame that should work: + * + * IFRAME-02: 0001 (we should allow) + * + * allow = (0001 & 1010) == 1010 + * + * allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0; + * --> allow = (0001 & 0010) == (0010 & 0001) ? 1 :0; + * --> allow = (0010) == (0010) + * --> allow = 1 + * + * Other examples: + * + * IFRAME-03: 0100 --> allowed + * IFRAME-04: 1001 --> allowed + * IFRAME-05: 1101 --> allowed but its not for us!!! + * + */ +int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +{ + u32 low_id, high_id; + + /* Cache bssid mask so that we can restore it + * on reset */ + memcpy(ah->ah_bssid_mask, mask, ETH_ALEN); + if (ah->ah_version == AR5K_AR5212) { + low_id = AR5K_LOW_ID(mask); + high_id = AR5K_HIGH_ID(mask); + + ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0); + ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1); + + return 0; + } + + return -EIO; +} + + +/************\ +* RX Control * +\************/ + +/** + * ath5k_hw_start_rx_pcu - Start RX engine + * + * @ah: The &struct ath5k_hw + * + * Starts RX engine on PCU so that hw can process RXed frames + * (ACK etc). + * + * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma + * TODO: Init ANI here + */ +void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/** + * at5k_hw_stop_rx_pcu - Stop RX engine + * + * @ah: The &struct ath5k_hw + * + * Stops RX engine on PCU + * + * TODO: Detach ANI here + */ +void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +{ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); +} + +/* + * Set multicast filter + */ +void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +{ + /* Set the multicat filter */ + ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); + ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); +} + +/** + * ath5k_hw_get_rx_filter - Get current rx filter + * + * @ah: The &struct ath5k_hw + * + * Returns the RX filter by reading rx filter and + * phy error filter registers. RX filter is used + * to set the allowed frame types that PCU will accept + * and pass to the driver. For a list of frame types + * check out reg.h. + */ +u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +{ + u32 data, filter = 0; + + filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER); + + /*Radar detection for 5212*/ + if (ah->ah_version == AR5K_AR5212) { + data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL); + + if (data & AR5K_PHY_ERR_FIL_RADAR) + filter |= AR5K_RX_FILTER_RADARERR; + if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK)) + filter |= AR5K_RX_FILTER_PHYERR; + } + + return filter; +} + +/** + * ath5k_hw_set_rx_filter - Set rx filter + * + * @ah: The &struct ath5k_hw + * @filter: RX filter mask (see reg.h) + * + * Sets RX filter register and also handles PHY error filter + * register on 5212 and newer chips so that we have proper PHY + * error reporting. + */ +void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +{ + u32 data = 0; + + /* Set PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) { + if (filter & AR5K_RX_FILTER_RADARERR) + data |= AR5K_PHY_ERR_FIL_RADAR; + if (filter & AR5K_RX_FILTER_PHYERR) + data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK; + } + + /* + * The AR5210 uses promiscous mode to detect radar activity + */ + if (ah->ah_version == AR5K_AR5210 && + (filter & AR5K_RX_FILTER_RADARERR)) { + filter &= ~AR5K_RX_FILTER_RADARERR; + filter |= AR5K_RX_FILTER_PROM; + } + + /*Zero length DMA (phy error reporting) */ + if (data) + AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA); + + /*Write RX Filter register*/ + ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER); + + /*Write PHY error filter register on 5212*/ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL); + +} + +/*********************\ +* Key table functions * +\*********************/ + +/* + * Reset a key entry on the table + */ +int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry) +{ + unsigned int i, type; + u16 micentry = entry + AR5K_KEYTABLE_MIC_OFFSET; + + type = ath5k_hw_reg_read(ah, AR5K_KEYTABLE_TYPE(entry)); + + for (i = 0; i < AR5K_KEYCACHE_SIZE; i++) + ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i)); + + /* Reset associated MIC entry if TKIP + * is enabled located at offset (entry + 64) */ + if (type == AR5K_KEYTABLE_TYPE_TKIP) { + for (i = 0; i < AR5K_KEYCACHE_SIZE / 2 ; i++) + ath5k_hw_reg_write(ah, 0, + AR5K_KEYTABLE_OFF(micentry, i)); + } + + /* + * Set NULL encryption on AR5212+ + * + * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5) + * AR5K_KEYTABLE_TYPE_NULL -> 0x00000007 + * + * Note2: Windows driver (ndiswrapper) sets this to + * 0x00000714 instead of 0x00000007 + */ + if (ah->ah_version >= AR5K_AR5211) { + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(entry)); + + if (type == AR5K_KEYTABLE_TYPE_TKIP) { + ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL, + AR5K_KEYTABLE_TYPE(micentry)); + } + } + + return 0; +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_phy.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_phy.c new file mode 100644 index 000000000..7891d39ea --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_phy.c @@ -0,0 +1,2581 @@ +/* + * PHY functions + * + * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +#define _ATH5K_PHY + +#include <unistd.h> +#include <stdlib.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" +#include "rfbuffer.h" +#include "rfgain.h" + +static inline int min(int x, int y) +{ + return (x < y) ? x : y; +} + +static inline int max(int x, int y) +{ + return (x > y) ? x : y; +} + +/* + * Used to modify RF Banks before writing them to AR5K_RF_BUFFER + */ +static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, + const struct ath5k_rf_reg *rf_regs, + u32 val, u8 reg_id, int set) +{ + const struct ath5k_rf_reg *rfreg = NULL; + u8 offset, bank, num_bits, col, position; + u16 entry; + u32 mask, data, last_bit, bits_shifted, first_bit; + u32 *rfb; + s32 bits_left; + unsigned i; + + data = 0; + rfb = ah->ah_rf_banks; + + for (i = 0; i < ah->ah_rf_regs_count; i++) { + if (rf_regs[i].index == reg_id) { + rfreg = &rf_regs[i]; + break; + } + } + + if (rfb == NULL || rfreg == NULL) { + DBG("ath5k: RF register not found!\n"); + /* should not happen */ + return 0; + } + + bank = rfreg->bank; + num_bits = rfreg->field.len; + first_bit = rfreg->field.pos; + col = rfreg->field.col; + + /* first_bit is an offset from bank's + * start. Since we have all banks on + * the same array, we use this offset + * to mark each bank's start */ + offset = ah->ah_offset[bank]; + + /* Boundary check */ + if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) { + DBG("ath5k: RF invalid values at offset %d\n", offset); + return 0; + } + + entry = ((first_bit - 1) / 8) + offset; + position = (first_bit - 1) % 8; + + if (set) + data = ath5k_hw_bitswap(val, num_bits); + + for (bits_shifted = 0, bits_left = num_bits; bits_left > 0; + position = 0, entry++) { + + last_bit = (position + bits_left > 8) ? 8 : + position + bits_left; + + mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) << + (col * 8); + + if (set) { + rfb[entry] &= ~mask; + rfb[entry] |= ((data << position) << (col * 8)) & mask; + data >>= (8 - position); + } else { + data |= (((rfb[entry] & mask) >> (col * 8)) >> position) + << bits_shifted; + bits_shifted += last_bit - position; + } + + bits_left -= 8 - position; + } + + data = set ? 1 : ath5k_hw_bitswap(data, num_bits); + + return data; +} + +/**********************\ +* RF Gain optimization * +\**********************/ + +/* + * This code is used to optimize rf gain on different environments + * (temprature mostly) based on feedback from a power detector. + * + * It's only used on RF5111 and RF5112, later RF chips seem to have + * auto adjustment on hw -notice they have a much smaller BANK 7 and + * no gain optimization ladder-. + * + * For more infos check out this patent doc + * http://www.freepatentsonline.com/7400691.html + * + * This paper describes power drops as seen on the receiver due to + * probe packets + * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues + * %20of%20Power%20Control.pdf + * + * And this is the MadWiFi bug entry related to the above + * http://madwifi-project.org/ticket/1659 + * with various measurements and diagrams + * + * TODO: Deal with power drops due to probes by setting an apropriate + * tx power on the probe packets ! Make this part of the calibration process. + */ + +/* Initialize ah_gain durring attach */ +int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) +{ + /* Initialize the gain optimization values */ + switch (ah->ah_radio) { + case AR5K_RF5111: + ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 35; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + case AR5K_RF5112: + ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 85; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Schedule a gain probe check on the next transmited packet. + * That means our next packet is going to be sent with lower + * tx power and a Peak to Average Power Detector (PAPD) will try + * to measure the gain. + * + * TODO: Use propper tx power setting for the probe packet so + * that we don't observe a serious power drop on the receiver + * + * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) + * just after we enable the probe so that we don't mess with + * standard traffic ? Maybe it's time to use sw interrupts and + * a probe tasklet !!! + */ +static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) +{ + + /* Skip if gain calibration is inactive or + * we already handle a probe request */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE) + return; + + /* Send the packet with 2dB below max power as + * patent doc suggest */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4, + AR5K_PHY_PAPD_PROBE_TXPOWER) | + AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); + + ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED; + +} + +/* Calculate gain_F measurement correction + * based on the current step for RF5112 rev. 2 */ +static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) +{ + u32 mix, step; + const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; + const struct ath5k_rf_reg *rf_regs; + + /* Only RF5112 Rev. 2 supports it */ + if ((ah->ah_radio != AR5K_RF5112) || + (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A)) + return 0; + + go = &rfgain_opt_5112; + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + if (ah->ah_rf_banks == NULL) + return 0; + + ah->ah_gain.g_f_corr = 0; + + /* No VGA (Variable Gain Amplifier) override, skip */ + if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, 0) != 1) + return 0; + + /* Mix gain stepping */ + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, 0); + + /* Mix gain override */ + mix = g_step->gos_param[0]; + + switch (mix) { + case 3: + ah->ah_gain.g_f_corr = step * 2; + break; + case 2: + ah->ah_gain.g_f_corr = (step - 5) * 2; + break; + case 1: + ah->ah_gain.g_f_corr = step; + break; + default: + ah->ah_gain.g_f_corr = 0; + break; + } + + return ah->ah_gain.g_f_corr; +} + +/* Check if current gain_F measurement is in the range of our + * power detector windows. If we get a measurement outside range + * we know it's not accurate (detectors can't measure anything outside + * their detection window) so we must ignore it */ +static int ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) +{ + const struct ath5k_rf_reg *rf_regs; + u32 step, mix_ovr, level[4]; + + if (ah->ah_rf_banks == NULL) + return 0; + + if (ah->ah_radio == AR5K_RF5111) { + + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP, + 0); + + level[0] = 0; + level[1] = (step == 63) ? 50 : step + 4; + level[2] = (step != 63) ? 64 : level[0]; + level[3] = level[2] + 50 ; + + ah->ah_gain.g_high = level[3] - + (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); + ah->ah_gain.g_low = level[0] + + (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); + } else { + + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + + mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, + 0); + + level[0] = level[2] = 0; + + if (mix_ovr == 1) { + level[1] = level[3] = 83; + } else { + level[1] = level[3] = 107; + ah->ah_gain.g_high = 55; + } + } + + return (ah->ah_gain.g_current >= level[0] && + ah->ah_gain.g_current <= level[1]) || + (ah->ah_gain.g_current >= level[2] && + ah->ah_gain.g_current <= level[3]); +} + +/* Perform gain_F adjustment by choosing the right set + * of parameters from rf gain optimization ladder */ +static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) +{ + const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; + int ret = 0; + + switch (ah->ah_radio) { + case AR5K_RF5111: + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + go = &rfgain_opt_5112; + break; + default: + return 0; + } + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + if (ah->ah_gain.g_current >= ah->ah_gain.g_high) { + + /* Reached maximum */ + if (ah->ah_gain.g_step_idx == 0) + return -1; + + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target >= ah->ah_gain.g_high && + ah->ah_gain.g_step_idx > 0; + g_step = &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain - + g_step->gos_gain); + + ret = 1; + goto done; + } + + if (ah->ah_gain.g_current <= ah->ah_gain.g_low) { + + /* Reached minimum */ + if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1)) + return -2; + + for (ah->ah_gain.g_target = ah->ah_gain.g_current; + ah->ah_gain.g_target <= ah->ah_gain.g_low && + ah->ah_gain.g_step_idx < go->go_steps_count-1; + g_step = &go->go_step[ah->ah_gain.g_step_idx]) + ah->ah_gain.g_target -= 2 * + (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - + g_step->gos_gain); + + ret = 2; + goto done; + } + +done: + DBG2("ath5k RF adjust: ret %d, gain step %d, current gain %d, " + "target gain %d\n", ret, ah->ah_gain.g_step_idx, + ah->ah_gain.g_current, ah->ah_gain.g_target); + + return ret; +} + +/* Main callback for thermal rf gain calibration engine + * Check for a new gain reading and schedule an adjustment + * if needed. + * + * TODO: Use sw interrupt to schedule reset if gain_F needs + * adjustment */ +enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) +{ + u32 data, type; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + + if (ah->ah_rf_banks == NULL || + ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE) + return AR5K_RFGAIN_INACTIVE; + + /* No check requested, either engine is inactive + * or an adjustment is already requested */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED) + goto done; + + /* Read the PAPD (Peak to Average Power Detector) + * register */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); + + /* No probe is scheduled, read gain_F measurement */ + if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { + ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; + type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); + + /* If tx packet is CCK correct the gain_F measurement + * by cck ofdm gain delta */ + if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) { + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) + ah->ah_gain.g_current += + ee->ee_cck_ofdm_gain_delta; + else + ah->ah_gain.g_current += + AR5K_GAIN_CCK_PROBE_CORR; + } + + /* Further correct gain_F measurement for + * RF5112A radios */ + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + ath5k_hw_rf_gainf_corr(ah); + ah->ah_gain.g_current = + ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? + (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : + 0; + } + + /* Check if measurement is ok and if we need + * to adjust gain, schedule a gain adjustment, + * else switch back to the acive state */ + if (ath5k_hw_rf_check_gainf_readback(ah) && + AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && + ath5k_hw_rf_gainf_adjust(ah)) { + ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE; + } else { + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + } + } + +done: + return ah->ah_gain.g_state; +} + +/* Write initial rf gain table to set the RF sensitivity + * this one works on all RF chips and has nothing to do + * with gain_F calibration */ +int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) +{ + const struct ath5k_ini_rfgain *ath5k_rfg; + unsigned int i, size; + + switch (ah->ah_radio) { + case AR5K_RF5111: + ath5k_rfg = rfgain_5111; + size = ARRAY_SIZE(rfgain_5111); + break; + case AR5K_RF5112: + ath5k_rfg = rfgain_5112; + size = ARRAY_SIZE(rfgain_5112); + break; + case AR5K_RF2413: + ath5k_rfg = rfgain_2413; + size = ARRAY_SIZE(rfgain_2413); + break; + case AR5K_RF2316: + ath5k_rfg = rfgain_2316; + size = ARRAY_SIZE(rfgain_2316); + break; + case AR5K_RF5413: + ath5k_rfg = rfgain_5413; + size = ARRAY_SIZE(rfgain_5413); + break; + case AR5K_RF2317: + case AR5K_RF2425: + ath5k_rfg = rfgain_2425; + size = ARRAY_SIZE(rfgain_2425); + break; + default: + return -EINVAL; + } + + switch (freq) { + case AR5K_INI_RFGAIN_2GHZ: + case AR5K_INI_RFGAIN_5GHZ: + break; + default: + return -EINVAL; + } + + for (i = 0; i < size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], + (u32)ath5k_rfg[i].rfg_register); + } + + return 0; +} + + + +/********************\ +* RF Registers setup * +\********************/ + + +/* + * Setup RF registers by writing rf buffer on hw + */ +int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct net80211_channel *channel, + unsigned int mode) +{ + const struct ath5k_rf_reg *rf_regs; + const struct ath5k_ini_rfbuffer *ini_rfb; + const struct ath5k_gain_opt *go = NULL; + const struct ath5k_gain_opt_step *g_step; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 ee_mode = 0; + u32 *rfb; + int obdb = -1, bank = -1; + unsigned i; + + switch (ah->ah_radio) { + case AR5K_RF5111: + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + ini_rfb = rfb_5111; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111); + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + ini_rfb = rfb_5112a; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a); + } else { + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + ini_rfb = rfb_5112; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112); + } + go = &rfgain_opt_5112; + break; + case AR5K_RF2413: + rf_regs = rf_regs_2413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413); + ini_rfb = rfb_2413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413); + break; + case AR5K_RF2316: + rf_regs = rf_regs_2316; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316); + ini_rfb = rfb_2316; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316); + break; + case AR5K_RF5413: + rf_regs = rf_regs_5413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413); + ini_rfb = rfb_5413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413); + break; + case AR5K_RF2317: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + ini_rfb = rfb_2317; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317); + break; + case AR5K_RF2425: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + if (ah->ah_mac_srev < AR5K_SREV_AR2417) { + ini_rfb = rfb_2425; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425); + } else { + ini_rfb = rfb_2417; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417); + } + break; + default: + return -EINVAL; + } + + /* If it's the first time we set rf buffer, allocate + * ah->ah_rf_banks based on ah->ah_rf_banks_size + * we set above */ + if (ah->ah_rf_banks == NULL) { + ah->ah_rf_banks = malloc(sizeof(u32) * ah->ah_rf_banks_size); + if (ah->ah_rf_banks == NULL) { + return -ENOMEM; + } + } + + /* Copy values to modify them */ + rfb = ah->ah_rf_banks; + + for (i = 0; i < ah->ah_rf_banks_size; i++) { + if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) { + DBG("ath5k: invalid RF register bank\n"); + return -EINVAL; + } + + /* Bank changed, write down the offset */ + if (bank != ini_rfb[i].rfb_bank) { + bank = ini_rfb[i].rfb_bank; + ah->ah_offset[bank] = i; + } + + rfb[i] = ini_rfb[i].rfb_mode_data[mode]; + } + + /* Set Output and Driver bias current (OB/DB) */ + if (channel->hw_value & CHANNEL_2GHZ) { + + if (channel->hw_value & CHANNEL_CCK) + ee_mode = AR5K_EEPROM_MODE_11B; + else + ee_mode = AR5K_EEPROM_MODE_11G; + + /* For RF511X/RF211X combination we + * use b_OB and b_DB parameters stored + * in eeprom on ee->ee_ob[ee_mode][0] + * + * For all other chips we use OB/DB for 2Ghz + * stored in the b/g modal section just like + * 802.11a on ee->ee_ob[ee_mode][1] */ + if ((ah->ah_radio == AR5K_RF5111) || + (ah->ah_radio == AR5K_RF5112)) + obdb = 0; + else + obdb = 1; + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_2GHZ, 1); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_2GHZ, 1); + + /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */ + } else if ((channel->hw_value & CHANNEL_5GHZ) || + (ah->ah_radio == AR5K_RF5111)) { + + /* For 11a, Turbo and XR we need to choose + * OB/DB based on frequency range */ + ee_mode = AR5K_EEPROM_MODE_11A; + obdb = channel->center_freq >= 5725 ? 3 : + (channel->center_freq >= 5500 ? 2 : + (channel->center_freq >= 5260 ? 1 : + (channel->center_freq > 4000 ? 0 : -1))); + + if (obdb < 0) + return -EINVAL; + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_5GHZ, 1); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_5GHZ, 1); + } + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; + + /* Bank Modifications (chip-specific) */ + if (ah->ah_radio == AR5K_RF5111) { + + /* Set gain_F settings according to current step */ + if (channel->hw_value & CHANNEL_OFDM) { + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, + g_step->gos_param[0]); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_90, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_84, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_RFGAIN_SEL, 1); + + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + + } + + /* Bank 6/7 setup */ + + ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode], + AR5K_RF_PWD_XPD, 1); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, 1); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, 1); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_PLO_SEL, 1); + + /* TODO: Half/quarter channel support */ + } + + if (ah->ah_radio == AR5K_RF5112) { + + /* Set gain_F settings according to current step */ + if (channel->hw_value & CHANNEL_OFDM) { + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0], + AR5K_RF_MIXGAIN_OVR, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_138, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_137, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_PWD_136, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4], + AR5K_RF_PWD_132, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5], + AR5K_RF_PWD_131, 1); + + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6], + AR5K_RF_PWD_130, 1); + + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + } + + /* Bank 6/7 setup */ + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_XPD_SEL, 1); + + if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { + /* Rev. 1 supports only one xpd */ + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, 1); + + } else { + /* TODO: Set high and low gain bits */ + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_PD_GAIN_LO, 1); + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_PD_GAIN_HI, 1); + + /* Lower synth voltage on Rev 2 */ + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_HIGH_VC_CP, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_MID_VC_CP, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_LOW_VC_CP, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_PUSH_UP, 1); + + /* Decrease power consumption on 5213+ BaseBand */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PAD2GND, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB2_LVL, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB5_LVL, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_167, 1); + + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_166, 1); + } + } + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, 1); + + /* TODO: Half/quarter channel support */ + + } + + if (ah->ah_radio == AR5K_RF5413 && + channel->hw_value & CHANNEL_2GHZ) { + + ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE, + 1); + + /* Set optimum value for early revisions (on pci-e chips) */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424 && + ah->ah_mac_srev < AR5K_SREV_AR5413) + ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3), + AR5K_RF_PWD_ICLOBUF_2G, 1); + + } + + /* Write RF banks on hw */ + for (i = 0; i < ah->ah_rf_banks_size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register); + } + + return 0; +} + + +/**************************\ + PHY/RF channel functions +\**************************/ + +/* + * Check if a channel is supported + */ +int ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags) +{ + /* Check if the channel is in our supported range */ + if (flags & CHANNEL_2GHZ) { + if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) + return 1; + } else if (flags & CHANNEL_5GHZ) + if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && + (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) + return 1; + + return 0; +} + +/* + * Convertion needed for RF5110 + */ +static u32 ath5k_hw_rf5110_chan2athchan(struct net80211_channel *channel) +{ + u32 athchan; + + /* + * Convert IEEE channel/MHz to an internal channel value used + * by the AR5210 chipset. This has not been verified with + * newer chipsets like the AR5212A who have a completely + * different RF/PHY part. + */ + athchan = (ath5k_hw_bitswap((ath5k_freq_to_channel(channel->center_freq) + - 24) / 2, 5) << 1) + | (1 << 6) | 0x1; + return athchan; +} + +/* + * Set channel on RF5110 + */ +static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u32 data; + + /* + * Set the channel and wait + */ + data = ath5k_hw_rf5110_chan2athchan(channel); + ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0); + mdelay(1); + + return 0; +} + +/* + * Convertion needed for 5111 + */ +static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee, + struct ath5k_athchan_2ghz *athchan) +{ + int channel; + + /* Cast this value to catch negative channel numbers (>= -19) */ + channel = (int)ieee; + + /* + * Map 2GHz IEEE channel to 5GHz Atheros channel + */ + if (channel <= 13) { + athchan->a2_athchan = 115 + channel; + athchan->a2_flags = 0x46; + } else if (channel == 14) { + athchan->a2_athchan = 124; + athchan->a2_flags = 0x44; + } else if (channel >= 15 && channel <= 26) { + athchan->a2_athchan = ((channel - 14) * 4) + 132; + athchan->a2_flags = 0x46; + } else + return -EINVAL; + + return 0; +} + +/* + * Set channel on 5111 + */ +static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + struct ath5k_athchan_2ghz ath5k_channel_2ghz; + unsigned int ath5k_channel = ath5k_freq_to_channel(channel->center_freq); + u32 data0, data1, clock; + int ret; + + /* + * Set the channel on the RF5111 radio + */ + data0 = data1 = 0; + + if (channel->hw_value & CHANNEL_2GHZ) { + /* Map 2GHz channel to 5GHz Atheros channel ID */ + ret = ath5k_hw_rf5111_chan2athchan(ath5k_channel, + &ath5k_channel_2ghz); + if (ret) + return ret; + + ath5k_channel = ath5k_channel_2ghz.a2_athchan; + data0 = ((ath5k_hw_bitswap(ath5k_channel_2ghz.a2_flags, 8) & 0xff) + << 5) | (1 << 4); + } + + if (ath5k_channel < 145 || !(ath5k_channel & 1)) { + clock = 1; + data1 = ((ath5k_hw_bitswap(ath5k_channel - 24, 8) & 0xff) << 2) | + (clock << 1) | (1 << 10) | 1; + } else { + clock = 0; + data1 = ((ath5k_hw_bitswap((ath5k_channel - 24) / 2, 8) & 0xff) + << 2) | (clock << 1) | (1 << 10) | 1; + } + + ath5k_hw_reg_write(ah, (data1 & 0xff) | ((data0 & 0xff) << 8), + AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, ((data1 >> 8) & 0xff) | (data0 & 0xff00), + AR5K_RF_BUFFER_CONTROL_3); + + return 0; +} + +/* + * Set channel on 5112 and newer + */ +static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u32 data, data0, data1, data2; + u16 c; + + data = data0 = data1 = data2 = 0; + c = channel->center_freq; + + if (c < 4800) { + if (!((c - 2224) % 5)) { + data0 = ((2 * (c - 704)) - 3040) / 10; + data1 = 1; + } else if (!((c - 2192) % 5)) { + data0 = ((2 * (c - 672)) - 3040) / 10; + data1 = 0; + } else + return -EINVAL; + + data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); + } else if ((c - (c % 5)) != 2 || c > 5435) { + if (!(c % 20) && c >= 5120) { + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + data2 = ath5k_hw_bitswap(3, 2); + } else if (!(c % 10)) { + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + data2 = ath5k_hw_bitswap(2, 2); + } else if (!(c % 5)) { + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + data2 = ath5k_hw_bitswap(1, 2); + } else + return -EINVAL; + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + +/* + * Set the channel on the RF2425 + */ +static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u32 data, data0, data2; + u16 c; + + data = data0 = data2 = 0; + c = channel->center_freq; + + if (c < 4800) { + data0 = ath5k_hw_bitswap((c - 2272), 8); + data2 = 0; + /* ? 5GHz ? */ + } else if ((c - (c % 5)) != 2 || c > 5435) { + if (!(c % 20) && c < 5120) + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + else if (!(c % 10)) + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + else if (!(c % 5)) + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + else + return -EINVAL; + data2 = ath5k_hw_bitswap(1, 2); + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | data2 << 2 | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + +/* + * Set a channel on the radio chip + */ +int ath5k_hw_channel(struct ath5k_hw *ah, struct net80211_channel *channel) +{ + int ret; + /* + * Check bounds supported by the PHY (we don't care about regultory + * restrictions at this point). Note: hw_value already has the band + * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok() + * of the band by that */ + if (!ath5k_channel_ok(ah, channel->center_freq, channel->hw_value)) { + DBG("ath5k: channel frequency (%d MHz) out of supported " + "range\n", channel->center_freq); + return -EINVAL; + } + + /* + * Set the channel and wait + */ + switch (ah->ah_radio) { + case AR5K_RF5110: + ret = ath5k_hw_rf5110_channel(ah, channel); + break; + case AR5K_RF5111: + ret = ath5k_hw_rf5111_channel(ah, channel); + break; + case AR5K_RF2425: + ret = ath5k_hw_rf2425_channel(ah, channel); + break; + default: + ret = ath5k_hw_rf5112_channel(ah, channel); + break; + } + + if (ret) { + DBG("ath5k: setting channel failed: %s\n", strerror(ret)); + return ret; + } + + /* Set JAPAN setting for channel 14 */ + if (channel->center_freq == 2484) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_JAPAN); + } else { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_WORLD); + } + + ah->ah_current_channel = channel; + ah->ah_turbo = (channel->hw_value == CHANNEL_T ? 1 : 0); + + return 0; +} + +/*****************\ + PHY calibration +\*****************/ + +/** + * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration + * + * @ah: struct ath5k_hw pointer we are operating on + * @freq: the channel frequency, just used for error logging + * + * This function performs a noise floor calibration of the PHY and waits for + * it to complete. Then the noise floor value is compared to some maximum + * noise floor we consider valid. + * + * Note that this is different from what the madwifi HAL does: it reads the + * noise floor and afterwards initiates the calibration. Since the noise floor + * calibration can take some time to finish, depending on the current channel + * use, that avoids the occasional timeout warnings we are seeing now. + * + * See the following link for an Atheros patent on noise floor calibration: + * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ + * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 + * + * XXX: Since during noise floor calibration antennas are detached according to + * the patent, we should stop tx queues here. + */ +int +ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) +{ + int ret; + unsigned int i; + s32 noise_floor; + + /* + * Enable noise floor calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF, 0, 0); + + if (ret) { + DBG("ath5k: noise floor calibration timeout (%d MHz)\n", freq); + return -EAGAIN; + } + + /* Wait until the noise floor is calibrated and read the value */ + for (i = 20; i > 0; i--) { + mdelay(1); + noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF); + noise_floor = AR5K_PHY_NF_RVAL(noise_floor); + if (noise_floor & AR5K_PHY_NF_ACTIVE) { + noise_floor = AR5K_PHY_NF_AVAL(noise_floor); + + if (noise_floor <= AR5K_TUNE_NOISE_FLOOR) + break; + } + } + + DBG2("ath5k: noise floor %d\n", noise_floor); + + if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { + DBG("ath5k: noise floor calibration failed (%d MHz)\n", freq); + return -EAGAIN; + } + + ah->ah_noise_floor = noise_floor; + + return 0; +} + +/* + * Perform a PHY calibration on RF5110 + * -Fix BPSK/QAM Constellation (I/Q correction) + * -Calculate Noise Floor + */ +static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u32 phy_sig, phy_agc, phy_sat, beacon; + int ret; + + /* + * Disable beacons and RX/TX queues, wait + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210); + ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210); + + mdelay(2); + + /* + * Set the channel (with AGC turned off) + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ret = ath5k_hw_channel(ah, channel); + + /* + * Activate PHY and wait + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + mdelay(1); + + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + if (ret) + return ret; + + /* + * Calibrate the radio chip + */ + + /* Remember normal state */ + phy_sig = ath5k_hw_reg_read(ah, AR5K_PHY_SIG); + phy_agc = ath5k_hw_reg_read(ah, AR5K_PHY_AGCCOARSE); + phy_sat = ath5k_hw_reg_read(ah, AR5K_PHY_ADCSAT); + + /* Update radio registers */ + ath5k_hw_reg_write(ah, (phy_sig & ~(AR5K_PHY_SIG_FIRPWR)) | + AR5K_REG_SM(-1, AR5K_PHY_SIG_FIRPWR), AR5K_PHY_SIG); + + ath5k_hw_reg_write(ah, (phy_agc & ~(AR5K_PHY_AGCCOARSE_HI | + AR5K_PHY_AGCCOARSE_LO)) | + AR5K_REG_SM(-1, AR5K_PHY_AGCCOARSE_HI) | + AR5K_REG_SM(-127, AR5K_PHY_AGCCOARSE_LO), AR5K_PHY_AGCCOARSE); + + ath5k_hw_reg_write(ah, (phy_sat & ~(AR5K_PHY_ADCSAT_ICNT | + AR5K_PHY_ADCSAT_THR)) | + AR5K_REG_SM(2, AR5K_PHY_ADCSAT_ICNT) | + AR5K_REG_SM(12, AR5K_PHY_ADCSAT_THR), AR5K_PHY_ADCSAT); + + udelay(20); + + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + udelay(10); + ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG); + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE); + + mdelay(1); + + /* + * Enable calibration and wait until completion + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + + ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, 0); + + /* Reset to normal state */ + ath5k_hw_reg_write(ah, phy_sig, AR5K_PHY_SIG); + ath5k_hw_reg_write(ah, phy_agc, AR5K_PHY_AGCCOARSE); + ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT); + + if (ret) { + DBG("ath5k: calibration timeout (%d MHz)\n", + channel->center_freq); + return ret; + } + + ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + + /* + * Re-enable RX/TX and beacons + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5210, + AR5K_DIAG_SW_DIS_TX | AR5K_DIAG_SW_DIS_RX_5210); + ath5k_hw_reg_write(ah, beacon, AR5K_BEACON_5210); + + return 0; +} + +/* + * Perform a PHY calibration on RF5111/5112 and newer chips + */ +static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u32 i_pwr, q_pwr; + s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; + int i; + + if (!ah->ah_calibration || + ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) + goto done; + + /* Calibration has finished, get the results and re-run */ + for (i = 0; i <= 10; i++) { + iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); + i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); + q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); + } + + i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; + q_coffd = q_pwr >> 7; + + /* No correction */ + if (i_coffd == 0 || q_coffd == 0) + goto done; + + i_coff = ((-iq_corr) / i_coffd) & 0x3f; + + /* Boundary check */ + if (i_coff > 31) + i_coff = 31; + if (i_coff < -32) + i_coff = -32; + + q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f; + + /* Boundary check */ + if (q_coff > 15) + q_coff = 15; + if (q_coff < -16) + q_coff = -16; + + /* Commit new I/Q value */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | + ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); + + /* Re-enable calibration -if we don't we'll commit + * the same values again and again */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); + +done: + + /* TODO: Separate noise floor calibration from I/Q calibration + * since noise floor calibration interrupts rx path while I/Q + * calibration doesn't. We don't need to run noise floor calibration + * as often as I/Q calibration.*/ + ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + + /* Initiate a gain_F calibration */ + ath5k_hw_request_rfgain_probe(ah); + + return 0; +} + +/* + * Perform a PHY calibration + */ +int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + int ret; + + if (ah->ah_radio == AR5K_RF5110) + ret = ath5k_hw_rf5110_calibrate(ah, channel); + else + ret = ath5k_hw_rf511x_calibrate(ah, channel); + + return ret; +} + +int ath5k_hw_phy_disable(struct ath5k_hw *ah) +{ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + + return 0; +} + +/********************\ + Misc PHY functions +\********************/ + +/* + * Get the PHY Chip revision + */ +u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan) +{ + unsigned int i; + u32 srev; + u16 ret; + + /* + * Set the radio chip access register + */ + switch (chan) { + case CHANNEL_2GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); + break; + case CHANNEL_5GHZ: + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + break; + default: + return 0; + } + + mdelay(2); + + /* ...wait until PHY is ready and read the selected radio revision */ + ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34)); + + for (i = 0; i < 8; i++) + ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20)); + + if (ah->ah_version == AR5K_AR5210) { + srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf; + ret = (u16)ath5k_hw_bitswap(srev, 4) + 1; + } else { + srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff; + ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) | + ((srev & 0x0f) << 4), 8); + } + + /* Reset to the 5GHz mode */ + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + + return ret; +} + +void /*TODO:Boundary check*/ +ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant) +{ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_reg_write(ah, ant, AR5K_DEFAULT_ANTENNA); +} + +unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) +{ + if (ah->ah_version != AR5K_AR5210) + return ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + + return 0; /*XXX: What do we return for 5210 ?*/ +} + + +/****************\ +* TX power setup * +\****************/ + +/* + * Helper functions + */ + +/* + * Do linear interpolation between two given (x, y) points + */ +static s16 +ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, + s16 y_left, s16 y_right) +{ + s16 ratio, result; + + /* Avoid divide by zero and skip interpolation + * if we have the same point */ + if ((x_left == x_right) || (y_left == y_right)) + return y_left; + + /* + * Since we use ints and not fps, we need to scale up in + * order to get a sane ratio value (or else we 'll eg. get + * always 1 instead of 1.25, 1.75 etc). We scale up by 100 + * to have some accuracy both for 0.5 and 0.25 steps. + */ + ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left)); + + /* Now scale down to be in range */ + result = y_left + (ratio * (target - x_left) / 100); + + return result; +} + +/* + * Find vertical boundary (min pwr) for the linear PCDAC curve. + * + * Since we have the top of the curve and we draw the line below + * until we reach 1 (1 pcdac step) we need to know which point + * (x value) that is so that we don't go below y axis and have negative + * pcdac values when creating the curve, or fill the table with zeroes. + */ +static s16 +ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, + const s16 *pwrL, const s16 *pwrR) +{ + s8 tmp; + s16 min_pwrL, min_pwrR; + s16 pwr_i; + + if (pwrL[0] == pwrL[1]) + min_pwrL = pwrL[0]; + else { + pwr_i = pwrL[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + } while (tmp > 1); + + min_pwrL = pwr_i; + } + + if (pwrR[0] == pwrR[1]) + min_pwrR = pwrR[0]; + else { + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + } while (tmp > 1); + + min_pwrR = pwr_i; + } + + /* Keep the right boundary so that it works for both curves */ + return max(min_pwrL, min_pwrR); +} + +/* + * Interpolate (pwr,vpd) points to create a Power to PDADC or a + * Power to PCDAC curve. + * + * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC + * steps (offsets) on y axis. Power can go up to 31.5dB and max + * PCDAC/PDADC step for each curve is 64 but we can write more than + * one curves on hw so we can go up to 128 (which is the max step we + * can write on the final table). + * + * We write y values (PCDAC/PDADC steps) on hw. + */ +static void +ath5k_create_power_curve(s16 pmin, s16 pmax, + const s16 *pwr, const u8 *vpd, + u8 num_points, + u8 *vpd_table, u8 type) +{ + u8 idx[2] = { 0, 1 }; + s16 pwr_i = 2*pmin; + int i; + + if (num_points < 2) + return; + + /* We want the whole line, so adjust boundaries + * to cover the entire power range. Note that + * power values are already 0.25dB so no need + * to multiply pwr_i by 2 */ + if (type == AR5K_PWRTABLE_LINEAR_PCDAC) { + pwr_i = pmin; + pmin = 0; + pmax = 63; + } + + /* Find surrounding turning points (TPs) + * and interpolate between them */ + for (i = 0; (i <= (u16) (pmax - pmin)) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + + /* We passed the right TP, move to the next set of TPs + * if we pass the last TP, extrapolate above using the last + * two TPs for ratio */ + if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) { + idx[0]++; + idx[1]++; + } + + vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i, + pwr[idx[0]], pwr[idx[1]], + vpd[idx[0]], vpd[idx[1]]); + + /* Increase by 0.5dB + * (0.25 dB units) */ + pwr_i += 2; + } +} + +/* + * Get the surrounding per-channel power calibration piers + * for a given frequency so that we can interpolate between + * them and come up with an apropriate dataset for our current + * channel. + */ +static void +ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah, + struct net80211_channel *channel, + struct ath5k_chan_pcal_info **pcinfo_l, + struct ath5k_chan_pcal_info **pcinfo_r) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + pcinfo = ee->ee_pwr_cal_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + pcinfo = ee->ee_pwr_cal_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + pcinfo = ee->ee_pwr_cal_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_n_piers[mode] - 1; + + /* Frequency is below our calibrated + * range. Use the lowest power curve + * we have */ + if (target < pcinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + /* Frequency is above our calibrated + * range. Use the highest power curve + * we have */ + if (target > pcinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + /* Frequency is inside our calibrated + * channel range. Pick the surrounding + * calibration piers so that we can + * interpolate */ + for (i = 0; i <= max; i++) { + + /* Frequency matches one of our calibration + * piers, no need to interpolate, just use + * that calibration pier */ + if (pcinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + /* We found a calibration pier that's above + * frequency, use this pier and the previous + * one to interpolate */ + if (target < pcinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + *pcinfo_l = &pcinfo[idx_l]; + *pcinfo_r = &pcinfo[idx_r]; + + return; +} + +/* + * Get the surrounding per-rate power calibration data + * for a given frequency and interpolate between power + * values to set max target power supported by hw for + * each rate. + */ +static void +ath5k_get_rate_pcal_data(struct ath5k_hw *ah, + struct net80211_channel *channel, + struct ath5k_rate_pcal_info *rates) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rpinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + rpinfo = ee->ee_rate_tpwr_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + rpinfo = ee->ee_rate_tpwr_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + rpinfo = ee->ee_rate_tpwr_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_rate_target_pwr_num[mode] - 1; + + /* Get the surrounding calibration + * piers - same as above */ + if (target < rpinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + if (target > rpinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + for (i = 0; i <= max; i++) { + + if (rpinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + if (target < rpinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + /* Now interpolate power value, based on the frequency */ + rates->freq = target; + + rates->target_power_6to24 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_6to24, + rpinfo[idx_r].target_power_6to24); + + rates->target_power_36 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_36, + rpinfo[idx_r].target_power_36); + + rates->target_power_48 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_48, + rpinfo[idx_r].target_power_48); + + rates->target_power_54 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_54, + rpinfo[idx_r].target_power_54); +} + +/* + * Get the max edge power for this channel if + * we have such data from EEPROM's Conformance Test + * Limits (CTL), and limit max power if needed. + * + * FIXME: Only works for world regulatory domains + */ +static void +ath5k_get_max_ctl_power(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep = ee->ee_ctl_pwr; + u8 *ctl_val = ee->ee_ctl; + s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4; + s16 edge_pwr = 0; + u8 rep_idx; + u8 i, ctl_mode; + u8 ctl_idx = 0xFF; + u32 target = channel->center_freq; + + /* Find out a CTL for our mode that's not mapped + * on a specific reg domain. + * + * TODO: Map our current reg domain to one of the 3 available + * reg domain ids so that we can support more CTLs. */ + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_G: + ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_B: + ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_T: + ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_TG: + ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_XR: + /* Fall through */ + default: + return; + } + + for (i = 0; i < ee->ee_ctls; i++) { + if (ctl_val[i] == ctl_mode) { + ctl_idx = i; + break; + } + } + + /* If we have a CTL dataset available grab it and find the + * edge power for our frequency */ + if (ctl_idx == 0xFF) + return; + + /* Edge powers are sorted by frequency from lower + * to higher. Each CTL corresponds to 8 edge power + * measurements. */ + rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES; + + /* Don't do boundaries check because we + * might have more that one bands defined + * for this mode */ + + /* Get the edge power that's closer to our + * frequency */ + for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) { + rep_idx += i; + if (target <= rep[rep_idx].freq) + edge_pwr = (s16) rep[rep_idx].edge; + } + + if (edge_pwr) { + ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr); + } +} + + +/* + * Power to PCDAC table functions + */ + +/* + * Fill Power to PCDAC table on RF5111 + * + * No further processing is needed for RF5111, the only thing we have to + * do is fill the values below and above calibration range since eeprom data + * may not cover the entire PCDAC table. + */ +static void +ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, + s16 *table_max) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; + u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; + s16 min_pwr, max_pwr; + + /* Get table boundaries */ + min_pwr = table_min[0]; + pcdac_0 = pcdac_tmp[0]; + + max_pwr = table_max[0]; + pcdac_n = pcdac_tmp[table_max[0] - table_min[0]]; + + /* Extrapolate below minimum using pcdac_0 */ + pcdac_i = 0; + for (i = 0; i < min_pwr; i++) + pcdac_out[pcdac_i++] = pcdac_0; + + /* Copy values from pcdac_tmp */ + pwr_idx = min_pwr; + for (i = 0 ; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + pcdac_out[pcdac_i++] = pcdac_tmp[i]; + pwr_idx++; + } + + /* Extrapolate above maximum */ + while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE) + pcdac_out[pcdac_i++] = pcdac_n; + +} + +/* + * Combine available XPD Curves and fill Linear Power to PCDAC table + * on RF5112 + * + * RFX112 can have up to 2 curves (one for low txpower range and one for + * higher txpower range). We need to put them both on pcdac_out and place + * them in the correct location. In case we only have one curve available + * just fit it on pcdac_out (it's supposed to cover the entire range of + * available pwr levels since it's always the higher power curve). Extrapolate + * below and above final table if needed. + */ +static void +ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, + s16 *table_max, u8 pdcurves) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_low_pwr; + u8 *pcdac_high_pwr; + u8 *pcdac_tmp; + u8 pwr; + s16 max_pwr_idx; + s16 min_pwr_idx; + s16 mid_pwr_idx = 0; + /* Edge flag turs on the 7nth bit on the PCDAC + * to delcare the higher power curve (force values + * to be greater than 64). If we only have one curve + * we don't need to set this, if we have 2 curves and + * fill the table backwards this can also be used to + * switch from higher power curve to lower power curve */ + u8 edge_flag; + int i; + + /* When we have only one curve available + * that's the higher power curve. If we have + * two curves the first is the high power curve + * and the next is the low power curve. */ + if (pdcurves > 1) { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + mid_pwr_idx = table_max[1] - table_min[1] - 1; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + + /* If table size goes beyond 31.5dB, keep the + * upper 31.5dB range when setting tx power. + * Note: 126 = 31.5 dB in quarter dB steps */ + if (table_max[0] - table_min[1] > 126) + min_pwr_idx = table_max[0] - 126; + else + min_pwr_idx = table_min[1]; + + /* Since we fill table backwards + * start from high power curve */ + pcdac_tmp = pcdac_high_pwr; + + edge_flag = 0x40; + } else { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */ + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + min_pwr_idx = table_min[0]; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + pcdac_tmp = pcdac_high_pwr; + edge_flag = 0; + } + + /* This is used when setting tx power*/ + ah->ah_txpower.txp_min_idx = min_pwr_idx/2; + + /* Fill Power to PCDAC table backwards */ + pwr = max_pwr_idx; + for (i = 63; i >= 0; i--) { + /* Entering lower power range, reset + * edge flag and set pcdac_tmp to lower + * power curve.*/ + if (edge_flag == 0x40 && + (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + edge_flag = 0x00; + pcdac_tmp = pcdac_low_pwr; + pwr = mid_pwr_idx/2; + } + + /* Don't go below 1, extrapolate below if we have + * already swithced to the lower power curve -or + * we only have one curve and edge_flag is zero + * anyway */ + if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { + while (i >= 0) { + pcdac_out[i] = pcdac_out[i + 1]; + i--; + } + break; + } + + pcdac_out[i] = pcdac_tmp[pwr] | edge_flag; + + /* Extrapolate above if pcdac is greater than + * 126 -this can happen because we OR pcdac_out + * value with edge_flag on high power curve */ + if (pcdac_out[i] > 126) + pcdac_out[i] = 126; + + /* Decrease by a 0.5dB step */ + pwr--; + } +} + +/* Write PCDAC values on hw */ +static void +ath5k_setup_pcdac_table(struct ath5k_hw *ah) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + int i; + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16), + AR5K_PHY_PCDAC_TXPOWER(i)); + } +} + + +/* + * Power to PDADC table functions + */ + +/* + * Set the gain boundaries and create final Power to PDADC table + * + * We can have up to 4 pd curves, we need to do a simmilar process + * as we do for RF5112. This time we don't have an edge_flag but we + * set the gain boundaries on a separate register. + */ +static void +ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, + s16 *pwr_min, s16 *pwr_max, u8 pdcurves) +{ + u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS]; + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdadc_tmp; + s16 pdadc_0; + u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size; + u8 pd_gain_overlap; + + /* Note: Register value is initialized on initvals + * there is no feedback from hw. + * XXX: What about pd_gain_overlap from EEPROM ? */ + pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) & + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP; + + /* Create final PDADC table */ + for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) { + pdadc_tmp = ah->ah_txpower.tmpL[pdg]; + + if (pdg == pdcurves - 1) + /* 2 dB boundary stretch for last + * (higher power) curve */ + gain_boundaries[pdg] = pwr_max[pdg] + 4; + else + /* Set gain boundary in the middle + * between this curve and the next one */ + gain_boundaries[pdg] = + (pwr_max[pdg] + pwr_min[pdg + 1]) / 2; + + /* Sanity check in case our 2 db stretch got out of + * range. */ + if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER) + gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER; + + /* For the first curve (lower power) + * start from 0 dB */ + if (pdg == 0) + pdadc_0 = 0; + else + /* For the other curves use the gain overlap */ + pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) - + pd_gain_overlap; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1) + pwr_step = pdadc_tmp[1] - pdadc_tmp[0]; + else + pwr_step = 1; + + /* If pdadc_0 is negative, we need to extrapolate + * below this pdgain by a number of pwr_steps */ + while ((pdadc_0 < 0) && (pdadc_i < 128)) { + s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step; + pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp; + pdadc_0++; + } + + /* Set last pwr level, using gain boundaries */ + pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg]; + /* Limit it to be inside pwr range */ + table_size = pwr_max[pdg] - pwr_min[pdg]; + max_idx = (pdadc_n < table_size) ? pdadc_n : table_size; + + /* Fill pdadc_out table */ + while (pdadc_0 < max_idx) + pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++]; + + /* Need to extrapolate above this pdgain? */ + if (pdadc_n <= max_idx) + continue; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1) + pwr_step = pdadc_tmp[table_size - 1] - + pdadc_tmp[table_size - 2]; + else + pwr_step = 1; + + /* Extrapolate above */ + while ((pdadc_0 < (s16) pdadc_n) && + (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) { + s16 tmp = pdadc_tmp[table_size - 1] + + (pdadc_0 - max_idx) * pwr_step; + pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp; + pdadc_0++; + } + } + + while (pdg < AR5K_EEPROM_N_PD_GAINS) { + gain_boundaries[pdg] = gain_boundaries[pdg - 1]; + pdg++; + } + + while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) { + pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1]; + pdadc_i++; + } + + /* Set gain boundaries */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(pd_gain_overlap, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) | + AR5K_REG_SM(gain_boundaries[0], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) | + AR5K_REG_SM(gain_boundaries[1], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) | + AR5K_REG_SM(gain_boundaries[2], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) | + AR5K_REG_SM(gain_boundaries[3], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4), + AR5K_PHY_TPC_RG5); + + /* Used for setting rate power table */ + ah->ah_txpower.txp_min_idx = pwr_min[0]; + +} + +/* Write PDADC values on hw */ +static void +ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, + u8 pdcurves, u8 *pdg_to_idx) +{ + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u32 reg; + u8 i; + + /* Select the right pdgain curves */ + + /* Clear current settings */ + reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1); + reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 | + AR5K_PHY_TPC_RG1_PDGAIN_2 | + AR5K_PHY_TPC_RG1_PDGAIN_3 | + AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + + /* + * Use pd_gains curve from eeprom + * + * This overrides the default setting from initvals + * in case some vendors (e.g. Zcomax) don't use the default + * curves. If we don't honor their settings we 'll get a + * 5dB (1 * gain overlap ?) drop. + */ + reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + + switch (pdcurves) { + case 3: + reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3); + /* Fall through */ + case 2: + reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2); + /* Fall through */ + case 1: + reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1); + break; + } + ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1); + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + ((pdadc_out[4*i + 0] & 0xff) << 0) | + ((pdadc_out[4*i + 1] & 0xff) << 8) | + ((pdadc_out[4*i + 2] & 0xff) << 16) | + ((pdadc_out[4*i + 3] & 0xff) << 24), + AR5K_PHY_PDADC_TXPOWER(i)); + } +} + + +/* + * Common code for PCDAC/PDADC tables + */ + +/* + * This is the main function that uses all of the above + * to set PCDAC/PDADC table on hw for the current channel. + * This table is used for tx power calibration on the basband, + * without it we get weird tx power levels and in some cases + * distorted spectral mask + */ +static int +ath5k_setup_channel_powertable(struct ath5k_hw *ah, + struct net80211_channel *channel, + u8 ee_mode, u8 type) +{ + struct ath5k_pdgain_info *pdg_L, *pdg_R; + struct ath5k_chan_pcal_info *pcinfo_L; + struct ath5k_chan_pcal_info *pcinfo_R; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode]; + s16 table_min[AR5K_EEPROM_N_PD_GAINS]; + s16 table_max[AR5K_EEPROM_N_PD_GAINS]; + u8 *tmpL; + u8 *tmpR; + u32 target = channel->center_freq; + int pdg, i; + + /* Get surounding freq piers for this channel */ + ath5k_get_chan_pcal_surrounding_piers(ah, channel, + &pcinfo_L, + &pcinfo_R); + + /* Loop over pd gain curves on + * surounding freq piers by index */ + for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { + + /* Fill curves in reverse order + * from lower power (max gain) + * to higher power. Use curve -> idx + * backmaping we did on eeprom init */ + u8 idx = pdg_curve_to_idx[pdg]; + + /* Grab the needed curves by index */ + pdg_L = &pcinfo_L->pd_curves[idx]; + pdg_R = &pcinfo_R->pd_curves[idx]; + + /* Initialize the temp tables */ + tmpL = ah->ah_txpower.tmpL[pdg]; + tmpR = ah->ah_txpower.tmpR[pdg]; + + /* Set curve's x boundaries and create + * curves so that they cover the same + * range (if we don't do that one table + * will have values on some range and the + * other one won't have any so interpolation + * will fail) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]) / 2; + + table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2; + + /* Now create the curves on surrounding channels + * and interpolate if needed to get the final + * curve for this gain on this channel */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* Override min/max so that we don't loose + * accuracy (don't divide by 2) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]); + + table_max[pdg] = + max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]); + + /* Override minimum so that we don't get + * out of bounds while extrapolating + * below. Don't do this when we have 2 + * curves and we are on the high power curve + * because table_min is ok in this case */ + if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) { + + table_min[pdg] = + ath5k_get_linear_pcdac_min(pdg_L->pd_step, + pdg_R->pd_step, + pdg_L->pd_pwr, + pdg_R->pd_pwr); + + /* Don't go too low because we will + * miss the upper part of the curve. + * Note: 126 = 31.5dB (max power supported) + * in 0.25dB units */ + if (table_max[pdg] - table_min[pdg] > 126) + table_min[pdg] = table_max[pdg] - 126; + } + + /* Fall through */ + case AR5K_PWRTABLE_PWR_TO_PCDAC: + case AR5K_PWRTABLE_PWR_TO_PDADC: + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_L->pd_pwr, + pdg_L->pd_step, + pdg_L->pd_points, tmpL, type); + + /* We are in a calibration + * pier, no need to interpolate + * between freq piers */ + if (pcinfo_L == pcinfo_R) + continue; + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_R->pd_pwr, + pdg_R->pd_step, + pdg_R->pd_points, tmpR, type); + break; + default: + return -EINVAL; + } + + /* Interpolate between curves + * of surounding freq piers to + * get the final curve for this + * pd gain. Re-use tmpL for interpolation + * output */ + for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + tmpL[i] = (u8) ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + (s16) tmpL[i], + (s16) tmpR[i]); + } + } + + /* Now we have a set of curves for this + * channel on tmpL (x range is table_max - table_min + * and y values are tmpL[pdg][]) sorted in the same + * order as EEPROM (because we've used the backmaping). + * So for RF5112 it's from higher power to lower power + * and for RF2413 it's from lower power to higher power. + * For RF5111 we only have one curve. */ + + /* Fill min and max power levels for this + * channel by interpolating the values on + * surounding channels to complete the dataset */ + ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->min_pwr, pcinfo_R->min_pwr); + + ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->max_pwr, pcinfo_R->max_pwr); + + /* We are ready to go, fill PCDAC/PDADC + * table and write settings on hardware */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* For RF5112 we can have one or two curves + * and each curve covers a certain power lvl + * range so we need to do some more processing */ + ath5k_combine_linear_pcdac_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Set txp.offset so that we can + * match max power value with max + * table index */ + ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PCDAC: + /* We are done for RF5111 since it has only + * one curve, just fit the curve on the table */ + ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max); + + /* No rate powertable adjustment for RF5111 */ + ah->ah_txpower.txp_min_idx = 0; + ah->ah_txpower.txp_offset = 0; + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PDADC: + /* Set PDADC boundaries and fill + * final PDADC table */ + ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Write settings on hw */ + ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx); + + /* Set txp.offset, note that table_min + * can be negative */ + ah->ah_txpower.txp_offset = table_min[0]; + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* + * Per-rate tx power setting + * + * This is the code that sets the desired tx power (below + * maximum) on hw for each rate (we also have TPC that sets + * power per packet). We do that by providing an index on the + * PCDAC/PDADC table we set up. + */ + +/* + * Set rate power table + * + * For now we only limit txpower based on maximum tx power + * supported by hw (what's inside rate_info). We need to limit + * this even more, based on regulatory domain etc. + * + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps) + * and is indexed as follows: + * rates[0] - rates[7] -> OFDM rates + * rates[8] - rates[14] -> CCK rates + * rates[15] -> XR rates (they all have the same power) + */ +static void +ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, + struct ath5k_rate_pcal_info *rate_info, + u8 ee_mode) +{ + unsigned int i; + u16 *rates; + + /* max_pwr is power level we got from driver/user in 0.5dB + * units, switch to 0.25dB units so we can compare */ + max_pwr *= 2; + max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2; + + /* apply rate limits */ + rates = ah->ah_txpower.txp_rates_power_table; + + /* OFDM rates 6 to 24Mb/s */ + for (i = 0; i < 5; i++) + rates[i] = min(max_pwr, rate_info->target_power_6to24); + + /* Rest OFDM rates */ + rates[5] = min(rates[0], rate_info->target_power_36); + rates[6] = min(rates[0], rate_info->target_power_48); + rates[7] = min(rates[0], rate_info->target_power_54); + + /* CCK rates */ + /* 1L */ + rates[8] = min(rates[0], rate_info->target_power_6to24); + /* 2L */ + rates[9] = min(rates[0], rate_info->target_power_36); + /* 2S */ + rates[10] = min(rates[0], rate_info->target_power_36); + /* 5L */ + rates[11] = min(rates[0], rate_info->target_power_48); + /* 5S */ + rates[12] = min(rates[0], rate_info->target_power_48); + /* 11L */ + rates[13] = min(rates[0], rate_info->target_power_54); + /* 11S */ + rates[14] = min(rates[0], rate_info->target_power_54); + + /* XR rates */ + rates[15] = min(rates[0], rate_info->target_power_6to24); + + /* CCK rates have different peak to average ratio + * so we have to tweak their power so that gainf + * correction works ok. For this we use OFDM to + * CCK delta from eeprom */ + if ((ee_mode == AR5K_EEPROM_MODE_11G) && + (ah->ah_phy_revision < AR5K_SREV_PHY_5212A)) + for (i = 8; i <= 15; i++) + rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + + ah->ah_txpower.txp_min_pwr = rates[7]; + ah->ah_txpower.txp_max_pwr = rates[0]; + ah->ah_txpower.txp_ofdm = rates[7]; +} + + +/* + * Set transmition power + */ +int +ath5k_hw_txpower(struct ath5k_hw *ah, struct net80211_channel *channel, + u8 ee_mode, u8 txpower) +{ + struct ath5k_rate_pcal_info rate_info; + u8 type; + int ret; + + if (txpower > AR5K_TUNE_MAX_TXPOWER) { + DBG("ath5k: invalid tx power %d\n", txpower); + return -EINVAL; + } + if (txpower == 0) + txpower = AR5K_TUNE_DEFAULT_TXPOWER; + + /* Reset TX power values */ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_txpower.txp_min_pwr = 0; + ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; + + /* Initialize TX power table */ + switch (ah->ah_radio) { + case AR5K_RF5111: + type = AR5K_PWRTABLE_PWR_TO_PCDAC; + break; + case AR5K_RF5112: + type = AR5K_PWRTABLE_LINEAR_PCDAC; + break; + case AR5K_RF2413: + case AR5K_RF5413: + case AR5K_RF2316: + case AR5K_RF2317: + case AR5K_RF2425: + type = AR5K_PWRTABLE_PWR_TO_PDADC; + break; + default: + return -EINVAL; + } + + /* FIXME: Only on channel/mode change */ + ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); + if (ret) + return ret; + + /* Limit max power if we have a CTL available */ + ath5k_get_max_ctl_power(ah, channel); + + /* FIXME: Tx power limit for this regdomain + * XXX: Mac80211/CRDA will do that anyway ? */ + + /* FIXME: Antenna reduction stuff */ + + /* FIXME: Limit power on turbo modes */ + + /* FIXME: TPC scale reduction */ + + /* Get surounding channels for per-rate power table + * calibration */ + ath5k_get_rate_pcal_data(ah, channel, &rate_info); + + /* Setup rate power table */ + ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode); + + /* Write rate power table on hw */ + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | + AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | + AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(7, 24) | + AR5K_TXPOWER_OFDM(6, 16) | AR5K_TXPOWER_OFDM(5, 8) | + AR5K_TXPOWER_OFDM(4, 0), AR5K_PHY_TXPOWER_RATE2); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(10, 24) | + AR5K_TXPOWER_CCK(9, 16) | AR5K_TXPOWER_CCK(15, 8) | + AR5K_TXPOWER_CCK(8, 0), AR5K_PHY_TXPOWER_RATE3); + + ath5k_hw_reg_write(ah, AR5K_TXPOWER_CCK(14, 24) | + AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | + AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); + + /* FIXME: TPC support */ + if (ah->ah_txpower.txp_tpc) { + ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | + AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + + ath5k_hw_reg_write(ah, + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), + AR5K_TPC); + } else { + ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | + AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + } + + return 0; +} + +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower) +{ + struct net80211_channel *channel = ah->ah_current_channel; + + DBG2("ath5k: changing txpower to %d\n", txpower); + + return ath5k_hw_txpower(ah, channel, mode, txpower); +} + +#undef _ATH5K_PHY diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_qcu.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_qcu.c new file mode 100644 index 000000000..e38dba9e2 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_qcu.c @@ -0,0 +1,390 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +/********************************************\ +Queue Control Unit, DFS Control Unit Functions +\********************************************/ + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* + * Set properties for a transmit queue + */ +int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, + const struct ath5k_txq_info *queue_info) +{ + if (ah->ah_txq.tqi_type == AR5K_TX_QUEUE_INACTIVE) + return -EIO; + + memcpy(&ah->ah_txq, queue_info, sizeof(struct ath5k_txq_info)); + + /*XXX: Is this supported on 5210 ?*/ + if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA && + ((queue_info->tqi_subtype == AR5K_WME_AC_VI) || + (queue_info->tqi_subtype == AR5K_WME_AC_VO))) || + queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD) + ah->ah_txq.tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS; + + return 0; +} + +/* + * Initialize a transmit queue + */ +int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, + struct ath5k_txq_info *queue_info) +{ + int ret; + + /* + * Setup internal queue structure + */ + memset(&ah->ah_txq, 0, sizeof(struct ath5k_txq_info)); + ah->ah_txq.tqi_type = queue_type; + + if (queue_info != NULL) { + queue_info->tqi_type = queue_type; + ret = ath5k_hw_set_tx_queueprops(ah, queue_info); + if (ret) + return ret; + } + + /* + * We use ah_txq_status to hold a temp value for + * the Secondary interrupt mask registers on 5211+ + * check out ath5k_hw_reset_tx_queue + */ + AR5K_Q_ENABLE_BITS(ah->ah_txq_status, 0); + + return 0; +} + +/* + * Set a transmit queue inactive + */ +void ath5k_hw_release_tx_queue(struct ath5k_hw *ah) +{ + /* This queue will be skipped in further operations */ + ah->ah_txq.tqi_type = AR5K_TX_QUEUE_INACTIVE; + /*For SIMR setup*/ + AR5K_Q_DISABLE_BITS(ah->ah_txq_status, 0); +} + +/* + * Set DFS properties for a transmit queue on DCU + */ +int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah) +{ + u32 cw_min, cw_max, retry_lg, retry_sh; + struct ath5k_txq_info *tq = &ah->ah_txq; + const int queue = 0; + + tq = &ah->ah_txq; + + if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE) + return 0; + + if (ah->ah_version == AR5K_AR5210) { + /* Only handle data queues, others will be ignored */ + if (tq->tqi_type != AR5K_TX_QUEUE_DATA) + return 0; + + /* Set Slot time */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME, + AR5K_SLOT_TIME); + /* Set ACK_CTS timeout */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_ACK_CTS_TIMEOUT_TURBO : + AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME); + /* Set Transmit Latency */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_TRANSMIT_LATENCY_TURBO : + AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210); + + /* Set IFS0 */ + if (ah->ah_turbo) { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME_TURBO) << + AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO, + AR5K_IFS0); + } else { + ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS + + (ah->ah_aifs + tq->tqi_aifs) * + AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) | + AR5K_INIT_SIFS, AR5K_IFS0); + } + + /* Set IFS1 */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + AR5K_INIT_PROTO_TIME_CNTRL_TURBO : + AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); + /* Set AR5K_PHY_SETTLING */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); + /* Set Frame Control Register */ + ath5k_hw_reg_write(ah, ah->ah_turbo ? + (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | + AR5K_PHY_TURBO_SHORT | 0x2020) : + (AR5K_PHY_FRAME_CTL_INI | 0x1020), + AR5K_PHY_FRAME_CTL_5210); + } + + /* + * Calculate cwmin/max by channel mode + */ + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX; + ah->ah_aifs = AR5K_TUNE_AIFS; + /*XR is only supported on 5212*/ + if (IS_CHAN_XR(ah->ah_current_channel) && + ah->ah_version == AR5K_AR5212) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR; + ah->ah_aifs = AR5K_TUNE_AIFS_XR; + /*B mode is not supported on 5210*/ + } else if (IS_CHAN_B(ah->ah_current_channel) && + ah->ah_version != AR5K_AR5210) { + cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B; + cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B; + ah->ah_aifs = AR5K_TUNE_AIFS_11B; + } + + cw_min = 1; + while (cw_min < ah->ah_cw_min) + cw_min = (cw_min << 1) | 1; + + cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) : + ((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1); + cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) : + ((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1); + + /* + * Calculate and set retry limits + */ + if (ah->ah_software_retry) { + /* XXX Need to test this */ + retry_lg = ah->ah_limit_tx_retries; + retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ? + AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg; + } else { + retry_lg = AR5K_INIT_LG_RETRY; + retry_sh = AR5K_INIT_SH_RETRY; + } + + /*No QCU/DCU [5210]*/ + if (ah->ah_version == AR5K_AR5210) { + ath5k_hw_reg_write(ah, + (cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S) + | AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_NODCU_RETRY_LMT_SLG_RETRY) + | AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_NODCU_RETRY_LMT_SSH_RETRY) + | AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY) + | AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY), + AR5K_NODCU_RETRY_LMT); + } else { + /*QCU/DCU [5211+]*/ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(AR5K_INIT_SLG_RETRY, + AR5K_DCU_RETRY_LMT_SLG_RETRY) | + AR5K_REG_SM(AR5K_INIT_SSH_RETRY, + AR5K_DCU_RETRY_LMT_SSH_RETRY) | + AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) | + AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY), + AR5K_QUEUE_DFS_RETRY_LIMIT(queue)); + + /*===Rest is also for QCU/DCU only [5211+]===*/ + + /* + * Set initial content window (cw_min/cw_max) + * and arbitrated interframe space (aifs)... + */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) | + AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) | + AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs, + AR5K_DCU_LCL_IFS_AIFS), + AR5K_QUEUE_DFS_LOCAL_IFS(queue)); + + /* + * Set misc registers + */ + /* Enable DCU early termination for this queue */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_DCU_EARLY); + + /* Enable DCU to wait for next fragment from QCU */ + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_FRAG_WAIT); + + /* On Maui and Spirit use the global seqnum on DCU */ + if (ah->ah_mac_version < AR5K_SREV_AR5211) + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue), + AR5K_DCU_MISC_SEQNUM_CTL); + + if (tq->tqi_cbr_period) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period, + AR5K_QCU_CBRCFG_INTVAL) | + AR5K_REG_SM(tq->tqi_cbr_overflow_limit, + AR5K_QCU_CBRCFG_ORN_THRES), + AR5K_QUEUE_CBRCFG(queue)); + AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_FRSHED_CBR); + if (tq->tqi_cbr_overflow_limit) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_CBR_THRES_ENABLE); + } + + if (tq->tqi_ready_time && + (tq->tqi_type != AR5K_TX_QUEUE_CAB)) + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time, + AR5K_QCU_RDYTIMECFG_INTVAL) | + AR5K_QCU_RDYTIMECFG_ENABLE, + AR5K_QUEUE_RDYTIMECFG(queue)); + + if (tq->tqi_burst_time) { + ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time, + AR5K_DCU_CHAN_TIME_DUR) | + AR5K_DCU_CHAN_TIME_ENABLE, + AR5K_QUEUE_DFS_CHANNEL_TIME(queue)); + + if (tq->tqi_flags + & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) + AR5K_REG_ENABLE_BITS(ah, + AR5K_QUEUE_MISC(queue), + AR5K_QCU_MISC_RDY_VEOL_POLICY); + } + + if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS, + AR5K_QUEUE_DFS_MISC(queue)); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE) + ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG, + AR5K_QUEUE_DFS_MISC(queue)); + + /* TODO: Handle frame compression */ + + /* + * Enable interrupts for this tx queue + * in the secondary interrupt mask registers + */ + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue); + + if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE) + AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue); + + /* Update secondary interrupt mask registers */ + + /* Filter out inactive queues */ + ah->ah_txq_imr_txok &= ah->ah_txq_status; + ah->ah_txq_imr_txerr &= ah->ah_txq_status; + ah->ah_txq_imr_txurn &= ah->ah_txq_status; + ah->ah_txq_imr_txdesc &= ah->ah_txq_status; + ah->ah_txq_imr_txeol &= ah->ah_txq_status; + ah->ah_txq_imr_cbrorn &= ah->ah_txq_status; + ah->ah_txq_imr_cbrurn &= ah->ah_txq_status; + ah->ah_txq_imr_qtrig &= ah->ah_txq_status; + ah->ah_txq_imr_nofrm &= ah->ah_txq_status; + + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok, + AR5K_SIMR0_QCU_TXOK) | + AR5K_REG_SM(ah->ah_txq_imr_txdesc, + AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr, + AR5K_SIMR1_QCU_TXERR) | + AR5K_REG_SM(ah->ah_txq_imr_txeol, + AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1); + /* Update simr2 but don't overwrite rest simr2 settings */ + AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN); + AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, + AR5K_REG_SM(ah->ah_txq_imr_txurn, + AR5K_SIMR2_QCU_TXURN)); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn, + AR5K_SIMR3_QCBRORN) | + AR5K_REG_SM(ah->ah_txq_imr_cbrurn, + AR5K_SIMR3_QCBRURN), AR5K_SIMR3); + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig, + AR5K_SIMR4_QTRIG), AR5K_SIMR4); + /* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm, + AR5K_TXNOFRM_QCU), AR5K_TXNOFRM); + /* No queue has TXNOFRM enabled, disable the interrupt + * by setting AR5K_TXNOFRM to zero */ + if (ah->ah_txq_imr_nofrm == 0) + ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM); + + /* Set QCU mask for this DCU to save power */ + AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue); + } + + return 0; +} + +/* + * Set slot time on DCU + */ +int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time) +{ + if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX) + return -EINVAL; + + if (ah->ah_version == AR5K_AR5210) + ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time, + ah->ah_turbo), AR5K_SLOT_TIME); + else + ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT); + + return 0; +} + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_reset.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_reset.c new file mode 100644 index 000000000..2f36a4e9a --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_reset.c @@ -0,0 +1,1174 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu> + * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org> + * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * + * Lightly modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net>. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +FILE_LICENCE ( MIT ); + +#define _ATH5K_RESET + +/*****************************\ + Reset functions and helpers +\*****************************/ + +#include <ipxe/pci.h> /* To determine if a card is pci-e */ +#include <unistd.h> + +#include "ath5k.h" +#include "reg.h" +#include "base.h" + +/* Find last set bit; fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32 */ +static int fls(int x) +{ + int r = 32; + + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) { + x <<= 1; + r -= 1; + } + return r; +} + + +/** + * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212 + * + * @ah: the &struct ath5k_hw + * @channel: the currently set channel upon reset + * + * Write the delta slope coefficient (used on pilot tracking ?) for OFDM + * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset(). + * + * Since delta slope is floating point we split it on its exponent and + * mantissa and provide these values on hw. + * + * For more infos i think this patent is related + * http://www.freepatentsonline.com/7184495.html + */ +static int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + /* Get exponent and mantissa and set it */ + u32 coef_scaled, coef_exp, coef_man, + ds_coef_exp, ds_coef_man, clock; + + if (!(ah->ah_version == AR5K_AR5212) || + !(channel->hw_value & CHANNEL_OFDM)) { + DBG("ath5k: attempt to set OFDM timings on non-OFDM channel\n"); + return -EFAULT; + } + + /* Get coefficient + * ALGO: coef = (5 * clock * carrier_freq) / 2) + * we scale coef by shifting clock value by 24 for + * better precision since we use integers */ + /* TODO: Half/quarter rate */ + clock = ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO); + + coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq; + + /* Get exponent + * ALGO: coef_exp = 14 - highest set bit position */ + coef_exp = fls(coef_scaled) - 1; + + /* Doesn't make sense if it's zero*/ + if (!coef_scaled || !coef_exp) + return -EINVAL; + + /* Note: we've shifted coef_scaled by 24 */ + coef_exp = 14 - (coef_exp - 24); + + + /* Get mantissa (significant digits) + * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */ + coef_man = coef_scaled + + (1 << (24 - coef_exp - 1)); + + /* Calculate delta slope coefficient exponent + * and mantissa (remove scaling) and set them on hw */ + ds_coef_man = coef_man >> (24 - coef_exp); + ds_coef_exp = coef_exp - 16; + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man); + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3, + AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp); + + return 0; +} + + +/* + * index into rates for control rates, we can set it up like this because + * this is only used for AR5212 and we know it supports G mode + */ +static const unsigned int control_rates[] = + { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; + +/** + * ath5k_hw_write_rate_duration - fill rate code to duration table + * + * @ah: the &struct ath5k_hw + * @mode: one of enum ath5k_driver_mode + * + * Write the rate code to duration table upon hw reset. This is a helper for + * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on + * the hardware, based on current mode, for each rate. The rates which are + * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have + * different rate code so we write their value twice (one for long preample + * and one for short). + * + * Note: Band doesn't matter here, if we set the values for OFDM it works + * on both a and g modes. So all we have to do is set values for all g rates + * that include all OFDM and CCK rates. If we operate in turbo or xr/half/ + * quarter rate mode, we need to use another set of bitrates (that's why we + * need the mode parameter) but we don't handle these proprietary modes yet. + */ +static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, + unsigned int mode __unused) +{ + struct ath5k_softc *sc = ah->ah_sc; + u16 rate; + int i; + + /* Write rate duration table */ + for (i = 0; i < sc->hwinfo->nr_rates[NET80211_BAND_2GHZ]; i++) { + u32 reg; + u16 tx_time; + + rate = sc->hwinfo->rates[NET80211_BAND_2GHZ][i]; + + /* Set ACK timeout */ + reg = AR5K_RATE_DUR(ath5k_bitrate_to_hw_rix(rate)); + + /* An ACK frame consists of 10 bytes. If you add the FCS, + * it's 14 bytes. Note we use the control rate and not the + * actual rate for this rate. See mac80211 tx.c + * ieee80211_duration() for a brief description of + * what rate we should choose to TX ACKs. */ + tx_time = net80211_duration(sc->dev, 14, rate); + + ath5k_hw_reg_write(ah, tx_time, reg); + + if (rate != 20 && rate != 55 && rate != 110) + continue; + + /* + * We're not distinguishing short preamble here, + * This is true, all we'll get is a longer value here + * which is not necessarilly bad. + */ + ath5k_hw_reg_write(ah, tx_time, + reg + (AR5K_SET_SHORT_PREAMBLE << 2)); + } +} + +/* + * Reset chipset + */ +static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val) +{ + int ret; + u32 mask = val ? val : ~0U; + + /* Read-and-clear RX Descriptor Pointer*/ + ath5k_hw_reg_read(ah, AR5K_RXDP); + + /* + * Reset the device and wait until success + */ + ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL); + + /* Wait at least 128 PCI clocks */ + udelay(15); + + if (ah->ah_version == AR5K_AR5210) { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA + | AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY; + } else { + val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND; + } + + ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, 0); + + /* + * Reset configuration register (for hw byte-swap). Note that this + * is only set for big endian. We do the necessary magic in + * AR5K_INIT_CFG. + */ + if ((val & AR5K_RESET_CTL_PCU) == 0) + ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG); + + return ret; +} + +/* + * Sleep control + */ +int ath5k_hw_wake(struct ath5k_hw *ah) +{ + unsigned int i; + u32 staid, data; + + staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); + staid &= ~AR5K_STA_ID1_PWR_SV; + + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if (data & 0xffc00000) + data = 0; + else + data = data & 0xfffcffff; + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); + + for (i = 50; i > 0; i--) { + /* Check if the chip did wake up */ + if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_SPWR_DN) == 0) + break; + + /* Wait a bit and retry */ + udelay(200); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + } + + /* Fail if the chip didn't wake up */ + if (i <= 0) + return -EIO; + + ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1); + + return 0; +} + +/* + * Bring up MAC + PHY Chips and program PLL + * TODO: Half/Quarter rate support + */ +int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, int initial __unused) +{ + struct pci_device *pdev = ah->ah_sc->pdev; + u32 turbo, mode, clock, bus_flags; + int ret; + + turbo = 0; + mode = 0; + clock = 0; + + /* Wakeup the device */ + ret = ath5k_hw_wake(ah); + if (ret) { + DBG("ath5k: failed to wake up the MAC chip\n"); + return ret; + } + + if (ah->ah_version != AR5K_AR5210) { + /* + * Get channel mode flags + */ + + if (ah->ah_radio >= AR5K_RF5112) { + mode = AR5K_PHY_MODE_RAD_RF5112; + clock = AR5K_PHY_PLL_RF5112; + } else { + mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/ + clock = AR5K_PHY_PLL_RF5111; /*Zero*/ + } + + if (flags & CHANNEL_2GHZ) { + mode |= AR5K_PHY_MODE_FREQ_2GHZ; + clock |= AR5K_PHY_PLL_44MHZ; + + if (flags & CHANNEL_CCK) { + mode |= AR5K_PHY_MODE_MOD_CCK; + } else if (flags & CHANNEL_OFDM) { + /* XXX Dynamic OFDM/CCK is not supported by the + * AR5211 so we set MOD_OFDM for plain g (no + * CCK headers) operation. We need to test + * this, 5211 might support ofdm-only g after + * all, there are also initial register values + * in the code for g mode (see initvals.c). */ + if (ah->ah_version == AR5K_AR5211) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else + mode |= AR5K_PHY_MODE_MOD_DYN; + } else { + DBG("ath5k: invalid radio modulation mode\n"); + return -EINVAL; + } + } else if (flags & CHANNEL_5GHZ) { + mode |= AR5K_PHY_MODE_FREQ_5GHZ; + + if (ah->ah_radio == AR5K_RF5413) + clock = AR5K_PHY_PLL_40MHZ_5413; + else + clock |= AR5K_PHY_PLL_40MHZ; + + if (flags & CHANNEL_OFDM) + mode |= AR5K_PHY_MODE_MOD_OFDM; + else { + DBG("ath5k: invalid radio modulation mode\n"); + return -EINVAL; + } + } else { + DBG("ath5k: invalid radio frequency mode\n"); + return -EINVAL; + } + + if (flags & CHANNEL_TURBO) + turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT; + } else { /* Reset the device */ + + /* ...enable Atheros turbo mode if requested */ + if (flags & CHANNEL_TURBO) + ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE, + AR5K_PHY_TURBO); + } + + /* reseting PCI on PCI-E cards results card to hang + * and always return 0xffff... so we ingore that flag + * for PCI-E cards */ + if (pci_find_capability(pdev, PCI_CAP_ID_EXP)) + bus_flags = 0; + else + bus_flags = AR5K_RESET_CTL_PCI; + + /* Reset chipset */ + if (ah->ah_version == AR5K_AR5210) { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA | + AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI); + mdelay(2); + } else { + ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU | + AR5K_RESET_CTL_BASEBAND | bus_flags); + } + if (ret) { + DBG("ath5k: failed to reset the MAC chip\n"); + return -EIO; + } + + /* ...wakeup again!*/ + ret = ath5k_hw_wake(ah); + if (ret) { + DBG("ath5k: failed to resume the MAC chip\n"); + return ret; + } + + /* ...final warm reset */ + if (ath5k_hw_nic_reset(ah, 0)) { + DBG("ath5k: failed to warm reset the MAC chip\n"); + return -EIO; + } + + if (ah->ah_version != AR5K_AR5210) { + + /* ...update PLL if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) { + ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL); + udelay(300); + } + + /* ...set the PHY operating mode */ + ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE); + ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO); + } + + return 0; +} + +static int ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + u8 refclk_freq; + + if ((ah->ah_radio == AR5K_RF5112) || + (ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) + refclk_freq = 40; + else + refclk_freq = 32; + + if ((channel->center_freq % refclk_freq != 0) && + ((channel->center_freq % refclk_freq < 10) || + (channel->center_freq % refclk_freq > 22))) + return 1; + else + return 0; +} + +/* TODO: Half/Quarter rate */ +static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, + struct net80211_channel *channel) +{ + if (ah->ah_version == AR5K_AR5212 && + ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + + /* Setup ADC control */ + ath5k_hw_reg_write(ah, + (AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) | + AR5K_REG_SM(2, + AR5K_PHY_ADC_CTL_INBUFGAIN_ON) | + AR5K_PHY_ADC_CTL_PWD_DAC_OFF | + AR5K_PHY_ADC_CTL_PWD_ADC_OFF), + AR5K_PHY_ADC_CTL); + + + + /* Disable barker RSSI threshold */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL, + AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2); + + /* Set the mute mask */ + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); + } + + /* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH); + + /* Enable DCU double buffering */ + if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B) + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_DCU_DBL_BUF_DIS); + + /* Set DAC/ADC delays */ + if (ah->ah_version == AR5K_AR5212) { + u32 scal; + if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)) + scal = AR5K_PHY_SCAL_32MHZ_2417; + else if (ath5k_eeprom_is_hb63(ah)) + scal = AR5K_PHY_SCAL_32MHZ_HB63; + else + scal = AR5K_PHY_SCAL_32MHZ; + ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL); + } + + /* Set fast ADC */ + if ((ah->ah_radio == AR5K_RF5413) || + (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) { + u32 fast_adc = 1; + + if (channel->center_freq == 2462 || + channel->center_freq == 2467) + fast_adc = 0; + + /* Only update if needed */ + if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc) + ath5k_hw_reg_write(ah, fast_adc, + AR5K_PHY_FAST_ADC); + } + + /* Fix for first revision of the RF5112 RF chipset */ + if (ah->ah_radio == AR5K_RF5112 && + ah->ah_radio_5ghz_revision < + AR5K_SREV_RAD_5112A) { + u32 data; + ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD, + AR5K_PHY_CCKTXCTL); + if (channel->hw_value & CHANNEL_5GHZ) + data = 0xffb81020; + else + data = 0xffb80d20; + ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + } + + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + u32 usec_reg; + /* 5311 has different tx/rx latency masks + * from 5211, since we deal 5311 the same + * as 5211 when setting initvals, shift + * values here to their proper locations */ + usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); + ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 | + AR5K_USEC_32 | + AR5K_USEC_TX_LATENCY_5211 | + AR5K_REG_SM(29, + AR5K_USEC_RX_LATENCY_5210)), + AR5K_USEC_5211); + /* Clear QCU/DCU clock gating register */ + ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); + /* Set DAC/ADC delays */ + ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL); + /* Enable PCU FIFO corruption ECO */ + AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, + AR5K_DIAG_SW_ECO_ENABLE); + } +} + +static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, + struct net80211_channel *channel, u8 *ant, u8 ee_mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + s16 cck_ofdm_pwr_delta; + + /* Adjust power delta for channel 14 */ + if (channel->center_freq == 2484) + cck_ofdm_pwr_delta = + ((ee->ee_cck_ofdm_power_delta - + ee->ee_scaled_cck_delta) * 2) / 10; + else + cck_ofdm_pwr_delta = + (ee->ee_cck_ofdm_power_delta * 2) / 10; + + /* Set CCK to OFDM power delta on tx power + * adjustment register */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + if (channel->hw_value == CHANNEL_G) + ath5k_hw_reg_write(ah, + AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | + AR5K_REG_SM((cck_ofdm_pwr_delta * -1), + AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX), + AR5K_PHY_TX_PWR_ADJ); + else + ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ); + } else { + /* For older revs we scale power on sw during tx power + * setup */ + ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta; + ah->ah_txpower.txp_cck_ofdm_gainf_delta = + ee->ee_cck_ofdm_gain_delta; + } + + /* Set antenna idle switch table */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL, + AR5K_PHY_ANT_CTL_SWTABLE_IDLE, + (ah->ah_antenna[ee_mode][0] | + AR5K_PHY_ANT_CTL_TXRX_EN)); + + /* Set antenna switch table */ + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]], + AR5K_PHY_ANT_SWITCH_TABLE_0); + ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]], + AR5K_PHY_ANT_SWITCH_TABLE_1); + + /* Noise floor threshold */ + ath5k_hw_reg_write(ah, + AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), + AR5K_PHY_NFTHRES); + + if ((channel->hw_value & CHANNEL_TURBO) && + (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) { + /* Switch settling time (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling_turbo[ee_mode]); + + /* Tx/Rx attenuation (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx_turbo[ee_mode]); + + /* ADC/PGA desired size (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size_turbo[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size_turbo[ee_mode]); + + /* Tx/Rx margin (Turbo) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx_turbo[ee_mode]); + + } else { + /* Switch settling time */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING, + AR5K_PHY_SETTLING_SWITCH, + ee->ee_switch_settling[ee_mode]); + + /* Tx/Rx attenuation */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN, + AR5K_PHY_GAIN_TXRX_ATTEN, + ee->ee_atn_tx_rx[ee_mode]); + + /* ADC/PGA desired size */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_ADC, + ee->ee_adc_desired_size[ee_mode]); + + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE, + AR5K_PHY_DESIRED_SIZE_PGA, + ee->ee_pga_desired_size[ee_mode]); + + /* Tx/Rx margin */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ, + AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX, + ee->ee_margin_tx_rx[ee_mode]); + } + + /* XPA delays */ + ath5k_hw_reg_write(ah, + (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | + (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | + (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); + + /* XLNA delay */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3, + AR5K_PHY_RF_CTL3_TXE2XLNA_ON, + ee->ee_tx_end2xlna_enable[ee_mode]); + + /* Thresh64 (ANI) */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF, + AR5K_PHY_NF_THRESH62, + ee->ee_thr_62[ee_mode]); + + + /* False detect backoff for channels + * that have spur noise. Write the new + * cyclic power RSSI threshold. */ + if (ath5k_hw_chan_has_spur_noise(ah, channel)) + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1 + + ee->ee_false_detect[ee_mode]); + else + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR, + AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1, + AR5K_INIT_CYCRSSI_THR1); + + /* I/Q correction + * TODO: Per channel i/q infos ? */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CORR_ENABLE | + (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) | + ee->ee_q_cal[ee_mode]); + + /* Heavy clipping -disable for now */ + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1) + ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE); + + return; +} + +/* + * Main reset function + */ +int ath5k_hw_reset(struct ath5k_hw *ah, + struct net80211_channel *channel, int change_channel) +{ + u32 s_seq[10], s_ant, s_led[3], staid1_flags; + u32 phy_tst1; + u8 mode, freq, ee_mode, ant[2]; + int i, ret; + + s_ant = 0; + ee_mode = 0; + staid1_flags = 0; + freq = 0; + mode = 0; + + /* + * Save some registers before a reset + */ + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + mode = AR5K_MODE_11A; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_G: + mode = AR5K_MODE_11G; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_B: + mode = AR5K_MODE_11B; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11B; + break; + case CHANNEL_T: + mode = AR5K_MODE_11A_TURBO; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + case CHANNEL_TG: + if (ah->ah_version == AR5K_AR5211) { + DBG("ath5k: TurboG not available on 5211\n"); + return -EINVAL; + } + mode = AR5K_MODE_11G_TURBO; + freq = AR5K_INI_RFGAIN_2GHZ; + ee_mode = AR5K_EEPROM_MODE_11G; + break; + case CHANNEL_XR: + if (ah->ah_version == AR5K_AR5211) { + DBG("ath5k: XR mode not available on 5211\n"); + return -EINVAL; + } + mode = AR5K_MODE_XR; + freq = AR5K_INI_RFGAIN_5GHZ; + ee_mode = AR5K_EEPROM_MODE_11A; + break; + default: + DBG("ath5k: invalid channel (%d MHz)\n", + channel->center_freq); + return -EINVAL; + } + + if (change_channel) { + /* + * Save frame sequence count + * For revs. after Oahu, only save + * seq num for DCU 0 (Global seq num) + */ + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + + for (i = 0; i < 10; i++) + s_seq[i] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(i)); + + } else { + s_seq[0] = ath5k_hw_reg_read(ah, + AR5K_QUEUE_DCU_SEQNUM(0)); + } + } + + /* Save default antenna */ + s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA); + + if (ah->ah_version == AR5K_AR5212) { + /* Since we are going to write rf buffer + * check if we have any pending gain_F + * optimization settings */ + if (change_channel && ah->ah_rf_banks != NULL) + ath5k_hw_gainf_calibrate(ah); + } + } + + /*GPIOs*/ + s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & + AR5K_PCICFG_LEDSTATE; + s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR); + s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO); + + /* AR5K_STA_ID1 flags, only preserve antenna + * settings and ack/cts rate mode */ + staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & + (AR5K_STA_ID1_DEFAULT_ANTENNA | + AR5K_STA_ID1_DESC_ANTENNA | + AR5K_STA_ID1_RTS_DEF_ANTENNA | + AR5K_STA_ID1_ACKCTS_6MB | + AR5K_STA_ID1_BASE_RATE_11B | + AR5K_STA_ID1_SELFGEN_DEF_ANT); + + /* Wakeup the device */ + ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, 0); + if (ret) + return ret; + + /* PHY access enable */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5211) + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); + else + ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40, + AR5K_PHY(0)); + + /* Write initial settings */ + ret = ath5k_hw_write_initvals(ah, mode, change_channel); + if (ret) + return ret; + + /* + * 5211/5212 Specific + */ + if (ah->ah_version != AR5K_AR5210) { + + /* + * Write initial RF gain settings + * This should work for both 5111/5112 + */ + ret = ath5k_hw_rfgain_init(ah, freq); + if (ret) + return ret; + + mdelay(1); + + /* + * Tweak initval settings for revised + * chipsets and add some more config + * bits + */ + ath5k_hw_tweak_initval_settings(ah, channel); + + /* + * Set TX power (FIXME) + */ + ret = ath5k_hw_txpower(ah, channel, ee_mode, + AR5K_TUNE_DEFAULT_TXPOWER); + if (ret) + return ret; + + /* Write rate duration table only on AR5212 */ + if (ah->ah_version == AR5K_AR5212) + ath5k_hw_write_rate_duration(ah, mode); + + /* + * Write RF buffer + */ + ret = ath5k_hw_rfregs_init(ah, channel, mode); + if (ret) + return ret; + + + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + } + + /*Enable/disable 802.11b mode on 5111 + (enable 2111 frequency converter + CCK)*/ + if (ah->ah_radio == AR5K_RF5111) { + if (mode == AR5K_MODE_11B) + AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + else + AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_B_MODE); + } + + /* + * In case a fixed antenna was set as default + * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE + * registers. + */ + if (s_ant != 0) { + if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */ + ant[0] = ant[1] = AR5K_ANT_FIXED_A; + else /* 2 - Aux */ + ant[0] = ant[1] = AR5K_ANT_FIXED_B; + } else { + ant[0] = AR5K_ANT_FIXED_A; + ant[1] = AR5K_ANT_FIXED_B; + } + + /* Commit values from EEPROM */ + ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode); + + } else { + /* + * For 5210 we do all initialization using + * initvals, so we don't have to modify + * any settings (5210 also only supports + * a/aturbo modes) + */ + mdelay(1); + /* Disable phy and wait */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT); + mdelay(1); + } + + /* + * Restore saved values + */ + + /*DCU/Antenna selection not available on 5210*/ + if (ah->ah_version != AR5K_AR5210) { + + if (change_channel) { + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { + for (i = 0; i < 10; i++) + ath5k_hw_reg_write(ah, s_seq[i], + AR5K_QUEUE_DCU_SEQNUM(i)); + } else { + ath5k_hw_reg_write(ah, s_seq[0], + AR5K_QUEUE_DCU_SEQNUM(0)); + } + } + + ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA); + } + + /* Ledstate */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]); + + /* Gpio settings */ + ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR); + ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO); + + /* Restore sta_id flags and preserve our mac address*/ + ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id), + AR5K_STA_ID0); + ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id), + AR5K_STA_ID1); + + + /* + * Configure PCU + */ + + /* Restore bssid and bssid mask */ + /* XXX: add ah->aid once mac80211 gives this to us */ + ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + + /* Set PCU config */ + ath5k_hw_set_opmode(ah); + + /* Clear any pending interrupts + * PISR/SISR Not available on 5210 */ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR); + + /* Set RSSI/BRSSI thresholds + * + * Note: If we decide to set this value + * dynamicaly, have in mind that when AR5K_RSSI_THR + * register is read it might return 0x40 if we haven't + * wrote anything to it plus BMISS RSSI threshold is zeroed. + * So doing a save/restore procedure here isn't the right + * choice. Instead store it on ath5k_hw */ + ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES | + AR5K_TUNE_BMISS_THRES << + AR5K_RSSI_THR_BMISS_S), + AR5K_RSSI_THR); + + /* MIC QoS support */ + if (ah->ah_mac_srev >= AR5K_SREV_AR2413) { + ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL); + ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL); + } + + /* QoS NOACK Policy */ + if (ah->ah_version == AR5K_AR5212) { + ath5k_hw_reg_write(ah, + AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) | + AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET) | + AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET), + AR5K_QOS_NOACK); + } + + + /* + * Configure PHY + */ + + /* Set channel on PHY */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + /* + * Enable the PHY and wait until completion + * This includes BaseBand and Synthesizer + * activation. + */ + ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + + /* + * On 5211+ read activation -> rx delay + * and use it. + * + * TODO: Half/quarter rate support + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + + udelay(100 + (2 * delay)); + } else { + mdelay(1); + } + + /* + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register + */ + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + + /* + * Start automatic gain control calibration + * + * During AGC calibration RX path is re-routed to + * a power detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * While rx path is re-routed to the power detector we also + * start a noise floor calibration, to measure the + * card's noise floor (the noise we measure when we are not + * transmiting or receiving anything). + * + * If we are in a noisy environment AGC calibration may time + * out and/or noise floor calibration might timeout. + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL); + + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = 0; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = 1; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ + if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_CAL, 0, 0)) { + DBG("ath5k: gain calibration timeout (%d MHz)\n", + channel->center_freq); + } + + /* + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. Also if AGC or NF cal. + * times out, reset doesn't fail on binary HAL. I believe + * that's wrong because since rx path is routed to a detector, + * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211 + * enables noise floor calibration after offset calibration and if noise + * floor calibration fails, reset fails. I believe that's + * a better approach, we just need to find a polling interval + * that suits best, even if reset continues we need to make + * sure that rx path is ready. + */ + ath5k_hw_noise_floor_calibration(ah, channel->center_freq); + + + /* + * Configure QCUs/DCUs + */ + + /* TODO: HW Compression support for data queues */ + /* TODO: Burst prefetch for data queues */ + + /* + * Reset queues and start beacon timers at the end of the reset routine + * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping + * Note: If we want we can assign multiple qcus on one dcu. + */ + ret = ath5k_hw_reset_tx_queue(ah); + if (ret) { + DBG("ath5k: failed to reset TX queue\n"); + return ret; + } + + /* + * Configure DMA/Interrupts + */ + + /* + * Set Rx/Tx DMA Configuration + * + * Set standard DMA size (128). Note that + * a DMA size of 512 causes rx overruns and tx errors + * on pci-e cards (tested on 5424 but since rx overruns + * also occur on 5416/5418 with madwifi we set 128 + * for all PCI-E cards to be safe). + * + * XXX: need to check 5210 for this + * TODO: Check out tx triger level, it's always 64 on dumps but I + * guess we can tweak it and see how it goes ;-) + */ + if (ah->ah_version != AR5K_AR5210) { + AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG, + AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B); + AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG, + AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B); + } + + /* Pre-enable interrupts on 5211/5212*/ + if (ah->ah_version != AR5K_AR5210) + ath5k_hw_set_imr(ah, ah->ah_imr); + + /* + * Setup RFKill interrupt if rfkill flag is set on eeprom. + * TODO: Use gpio pin and polarity infos from eeprom + * TODO: Handle this in ath5k_intr because it'll result + * a nasty interrupt storm. + */ +#if 0 + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) { + ath5k_hw_set_gpio_input(ah, 0); + ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0); + if (ah->ah_gpio[0] == 0) + ath5k_hw_set_gpio_intr(ah, 0, 1); + else + ath5k_hw_set_gpio_intr(ah, 0, 0); + } +#endif + + /* + * Disable beacons and reset the register + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE | + AR5K_BEACON_RESET_TSF); + + return 0; +} + +#undef _ATH5K_RESET diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_rfkill.c b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_rfkill.c new file mode 100644 index 000000000..752ef70b9 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/ath5k_rfkill.c @@ -0,0 +1,107 @@ +/* + * RFKILL support for ath5k + * + * Copyright (c) 2009 Tobias Doerffel <tobias.doerffel@gmail.com> + * Lightly modified for iPXE, Sep 2008 by Joshua Oreman <oremanj@rwcr.net> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +FILE_LICENCE ( MIT ); + +#include "base.h" + + +static inline void ath5k_rfkill_disable(struct ath5k_softc *sc) +{ + DBG("ath5k: rfkill disable (gpio:%d polarity:%d)\n", + sc->rf_kill.gpio, sc->rf_kill.polarity); + ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio); + ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, !sc->rf_kill.polarity); +} + + +static inline void ath5k_rfkill_enable(struct ath5k_softc *sc) +{ + DBG("ath5k: rfkill enable (gpio:%d polarity:%d)\n", + sc->rf_kill.gpio, sc->rf_kill.polarity); + ath5k_hw_set_gpio_output(sc->ah, sc->rf_kill.gpio); + ath5k_hw_set_gpio(sc->ah, sc->rf_kill.gpio, sc->rf_kill.polarity); +} + +static inline void ath5k_rfkill_set_intr(struct ath5k_softc *sc, int enable) +{ + struct ath5k_hw *ah = sc->ah; + u32 curval; + + ath5k_hw_set_gpio_input(ah, sc->rf_kill.gpio); + curval = ath5k_hw_get_gpio(ah, sc->rf_kill.gpio); + ath5k_hw_set_gpio_intr(ah, sc->rf_kill.gpio, enable ? + !!curval : !curval); +} + +static int __unused +ath5k_is_rfkill_set(struct ath5k_softc *sc) +{ + /* configuring GPIO for input for some reason disables rfkill */ + /*ath5k_hw_set_gpio_input(sc->ah, sc->rf_kill.gpio);*/ + return (ath5k_hw_get_gpio(sc->ah, sc->rf_kill.gpio) == + sc->rf_kill.polarity); +} + +void +ath5k_rfkill_hw_start(struct ath5k_hw *ah) +{ + struct ath5k_softc *sc = ah->ah_sc; + + /* read rfkill GPIO configuration from EEPROM header */ + sc->rf_kill.gpio = ah->ah_capabilities.cap_eeprom.ee_rfkill_pin; + sc->rf_kill.polarity = ah->ah_capabilities.cap_eeprom.ee_rfkill_pol; + + ath5k_rfkill_disable(sc); + + /* enable interrupt for rfkill switch */ + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) + ath5k_rfkill_set_intr(sc, 1); +} + + +void +ath5k_rfkill_hw_stop(struct ath5k_hw *ah) +{ + struct ath5k_softc *sc = ah->ah_sc; + + /* disable interrupt for rfkill switch */ + if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) + ath5k_rfkill_set_intr(sc, 0); + + /* enable RFKILL when stopping HW so Wifi LED is turned off */ + ath5k_rfkill_enable(sc); +} diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/base.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/base.h new file mode 100644 index 000000000..976a3f306 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/base.h @@ -0,0 +1,145 @@ +/*- + * Copyright (c) 2002-2007 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Modified for iPXE, July 2009, by Joshua Oreman <oremanj@rwcr.net> + * Original from Linux kernel 2.6.30. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +/* + * Defintions for the Atheros Wireless LAN controller driver. + */ +#ifndef _DEV_ATH_ATHVAR_H +#define _DEV_ATH_ATHVAR_H + +FILE_LICENCE ( BSD3 ); + +#include "ath5k.h" +#include <ipxe/iobuf.h> + +#define ATH_RXBUF 16 /* number of RX buffers */ +#define ATH_TXBUF 16 /* number of TX buffers */ + +struct ath5k_buf { + struct list_head list; + unsigned int flags; /* rx descriptor flags */ + struct ath5k_desc *desc; /* virtual addr of desc */ + u32 daddr; /* physical addr of desc */ + struct io_buffer *iob; /* I/O buffer for buf */ + u32 iobaddr;/* physical addr of iob data */ +}; + +/* + * Data transmit queue state. One of these exists for each + * hardware transmit queue. Packets sent to us from above + * are assigned to queues based on their priority. Not all + * devices support a complete set of hardware transmit queues. + * For those devices the array sc_ac2q will map multiple + * priorities to fewer hardware queues (typically all to one + * hardware queue). + */ +struct ath5k_txq { + unsigned int qnum; /* hardware q number */ + u32 *link; /* link ptr in last TX desc */ + struct list_head q; /* transmit queue */ + int setup; +}; + +#if CHAN_DEBUG +#define ATH_CHAN_MAX (26+26+26+200+200) +#else +#define ATH_CHAN_MAX (14+14+14+252+20) +#endif + +/* Software Carrier, keeps track of the driver state + * associated with an instance of a device */ +struct ath5k_softc { + struct pci_device *pdev; /* for dma mapping */ + void *iobase; /* address of the device */ + struct net80211_device *dev; /* IEEE 802.11 common */ + struct ath5k_hw *ah; /* Atheros HW */ + struct net80211_hw_info *hwinfo; + int curband; + int irq_ena; /* interrupts enabled */ + + struct ath5k_buf *bufptr; /* allocated buffer ptr */ + struct ath5k_desc *desc; /* TX/RX descriptors */ + u32 desc_daddr; /* DMA (physical) address */ + size_t desc_len; /* size of TX/RX descriptors */ + u16 cachelsz; /* cache line size */ + + int status; +#define ATH_STAT_INVALID 0x01 /* disable hardware accesses */ +#define ATH_STAT_MRRETRY 0x02 /* multi-rate retry support */ +#define ATH_STAT_PROMISC 0x04 +#define ATH_STAT_LEDSOFT 0x08 /* enable LED gpio status */ +#define ATH_STAT_STARTED 0x10 /* opened & irqs enabled */ + + unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */ + unsigned int curmode; /* current phy mode */ + struct net80211_channel *curchan; /* current h/w channel */ + + enum ath5k_int imask; /* interrupt mask copy */ + + u8 bssidmask[ETH_ALEN]; + + unsigned int rxbufsize; /* rx size based on mtu */ + struct list_head rxbuf; /* receive buffer */ + u32 *rxlink; /* link ptr in last RX desc */ + + struct list_head txbuf; /* transmit buffer */ + unsigned int txbuf_len; /* buf count in txbuf list */ + struct ath5k_txq txq; /* tx queue */ + + struct { + u16 gpio; + unsigned polarity; + } rf_kill; + + int last_calib_ticks; + + int power_level; /* Requested tx power in dbm */ + int assoc; /* assocate state */ + + int hw_rate; /* Hardware tx rate code */ + int hw_rtscts_rate; /* Hardware rts/cts rate code */ +}; + +#define ath5k_hw_hasbssidmask(_ah) \ + (ath5k_hw_get_capability(_ah, AR5K_CAP_BSSIDMASK, 0, NULL) == 0) +#define ath5k_hw_hasveol(_ah) \ + (ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0) + +#endif diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/desc.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/desc.h new file mode 100644 index 000000000..6e11b0d43 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/desc.h @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Internal RX/TX descriptor structures + * (rX: reserved fields possibily used by future versions of the ar5k chipset) + */ + +/* + * common hardware RX control descriptor + */ +struct ath5k_hw_rx_ctl { + u32 rx_control_0; /* RX control word 0 */ + u32 rx_control_1; /* RX control word 1 */ +} __attribute__ ((packed)); + +/* RX control word 0 field/sflags */ +#define AR5K_DESC_RX_CTL0 0x00000000 + +/* RX control word 1 fields/flags */ +#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff +#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 + +/* + * common hardware RX status descriptor + * 5210/11 and 5212 differ only in the flags defined below + */ +struct ath5k_hw_rx_status { + u32 rx_status_0; /* RX status word 0 */ + u32 rx_status_1; /* RX status word 1 */ +} __attribute__ ((packed)); + +/* 5210/5211 */ +/* RX status word 0 fields/flags */ +#define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff +#define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 19 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA 0x38000000 +#define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 27 + +/* RX status word 1 fields/flags */ +#define AR5K_5210_RX_DESC_STATUS1_DONE 0x00000001 +#define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 +#define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR 0x00000004 +#define AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN 0x00000008 +#define AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000010 +#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR 0x000000e0 +#define AR5K_5210_RX_DESC_STATUS1_PHY_ERROR_S 5 +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX 0x00007e00 +#define AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x0fff8000 +#define AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 15 +#define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS 0x10000000 + +/* 5212 */ +/* RX status word 0 fields/flags */ +#define AR5K_5212_RX_DESC_STATUS0_DATA_LEN 0x00000fff +#define AR5K_5212_RX_DESC_STATUS0_MORE 0x00001000 +#define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR 0x00002000 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE 0x000f8000 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE_S 15 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x0ff00000 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S 20 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA 0xf0000000 +#define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S 28 + +/* RX status word 1 fields/flags */ +#define AR5K_5212_RX_DESC_STATUS1_DONE 0x00000001 +#define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK 0x00000002 +#define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR 0x00000004 +#define AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR 0x00000008 +#define AR5K_5212_RX_DESC_STATUS1_PHY_ERROR 0x00000010 +#define AR5K_5212_RX_DESC_STATUS1_MIC_ERROR 0x00000020 +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID 0x00000100 +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX 0x0000fe00 +#define AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_S 9 +#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP 0x7fff0000 +#define AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP_S 16 +#define AR5K_5212_RX_DESC_STATUS1_KEY_CACHE_MISS 0x80000000 + +/* + * common hardware RX error descriptor + */ +struct ath5k_hw_rx_error { + u32 rx_error_0; /* RX status word 0 */ + u32 rx_error_1; /* RX status word 1 */ +} __attribute__ ((packed)); + +/* RX error word 0 fields/flags */ +#define AR5K_RX_DESC_ERROR0 0x00000000 + +/* RX error word 1 fields/flags */ +#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE 0x0000ff00 +#define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S 8 + +/* PHY Error codes */ +#define AR5K_DESC_RX_PHY_ERROR_NONE 0x00 +#define AR5K_DESC_RX_PHY_ERROR_TIMING 0x20 +#define AR5K_DESC_RX_PHY_ERROR_PARITY 0x40 +#define AR5K_DESC_RX_PHY_ERROR_RATE 0x60 +#define AR5K_DESC_RX_PHY_ERROR_LENGTH 0x80 +#define AR5K_DESC_RX_PHY_ERROR_64QAM 0xa0 +#define AR5K_DESC_RX_PHY_ERROR_SERVICE 0xc0 +#define AR5K_DESC_RX_PHY_ERROR_TRANSMITOVR 0xe0 + +/* + * 5210/5211 hardware 2-word TX control descriptor + */ +struct ath5k_hw_2w_tx_ctl { + u32 tx_control_0; /* TX control word 0 */ + u32 tx_control_1; /* TX control word 1 */ +} __attribute__ ((packed)); + +/* TX control word 0 fields/flags */ +#define AR5K_2W_TX_DESC_CTL0_FRAME_LEN 0x00000fff +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN 0x0003f000 /*[5210 ?]*/ +#define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S 12 +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE 0x003c0000 +#define AR5K_2W_TX_DESC_CTL0_XMIT_RATE_S 18 +#define AR5K_2W_TX_DESC_CTL0_RTSENA 0x00400000 +#define AR5K_2W_TX_DESC_CTL0_CLRDMASK 0x01000000 +#define AR5K_2W_TX_DESC_CTL0_LONG_PACKET 0x00800000 /*[5210]*/ +#define AR5K_2W_TX_DESC_CTL0_VEOL 0x00800000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE 0x1c000000 /*[5210]*/ +#define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S 26 +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 0x02000000 +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211 0x1e000000 + +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \ + AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211) + +#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_2W_TX_DESC_CTL0_INTREQ 0x20000000 +#define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 + +/* TX control word 1 fields/flags */ +#define AR5K_2W_TX_DESC_CTL1_BUF_LEN 0x00000fff +#define AR5K_2W_TX_DESC_CTL1_MORE 0x00001000 +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 0x0007e000 +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211 0x000fe000 + +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX \ + (ah->ah_version == AR5K_AR5210 ? \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \ + AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211) + +#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE 0x00700000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S 20 +#define AR5K_2W_TX_DESC_CTL1_NOACK 0x00800000 /*[5211]*/ +#define AR5K_2W_TX_DESC_CTL1_RTS_DURATION 0xfff80000 /*[5210 ?]*/ + +/* Frame types */ +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL 0x00 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM 0x04 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL 0x08 +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY 0x0c +#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 0x10 + +/* + * 5212 hardware 4-word TX control descriptor + */ +struct ath5k_hw_4w_tx_ctl { + u32 tx_control_0; /* TX control word 0 */ + +#define AR5K_4W_TX_DESC_CTL0_FRAME_LEN 0x00000fff +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER 0x003f0000 +#define AR5K_4W_TX_DESC_CTL0_XMIT_POWER_S 16 +#define AR5K_4W_TX_DESC_CTL0_RTSENA 0x00400000 +#define AR5K_4W_TX_DESC_CTL0_VEOL 0x00800000 +#define AR5K_4W_TX_DESC_CTL0_CLRDMASK 0x01000000 +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT 0x1e000000 +#define AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT_S 25 +#define AR5K_4W_TX_DESC_CTL0_INTREQ 0x20000000 +#define AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID 0x40000000 +#define AR5K_4W_TX_DESC_CTL0_CTSENA 0x80000000 + + u32 tx_control_1; /* TX control word 1 */ + +#define AR5K_4W_TX_DESC_CTL1_BUF_LEN 0x00000fff +#define AR5K_4W_TX_DESC_CTL1_MORE 0x00001000 +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX 0x000fe000 +#define AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S 13 +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE 0x00f00000 +#define AR5K_4W_TX_DESC_CTL1_FRAME_TYPE_S 20 +#define AR5K_4W_TX_DESC_CTL1_NOACK 0x01000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC 0x06000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_PROC_S 25 +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN 0x18000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_IV_LEN_S 27 +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN 0x60000000 +#define AR5K_4W_TX_DESC_CTL1_COMP_ICV_LEN_S 29 + + u32 tx_control_2; /* TX control word 2 */ + +#define AR5K_4W_TX_DESC_CTL2_RTS_DURATION 0x00007fff +#define AR5K_4W_TX_DESC_CTL2_DURATION_UPDATE_ENABLE 0x00008000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0 0x000f0000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0_S 16 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1 0x00f00000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1_S 20 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2 0x0f000000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2_S 24 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3 0xf0000000 +#define AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3_S 28 + + u32 tx_control_3; /* TX control word 3 */ + +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE0 0x0000001f +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1 0x000003e0 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE1_S 5 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2 0x00007c00 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE2_S 10 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3 0x000f8000 +#define AR5K_4W_TX_DESC_CTL3_XMIT_RATE3_S 15 +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 +#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20 +} __attribute__ ((packed)); + +/* + * Common TX status descriptor + */ +struct ath5k_hw_tx_status { + u32 tx_status_0; /* TX status word 0 */ + u32 tx_status_1; /* TX status word 1 */ +} __attribute__ ((packed)); + +/* TX status word 0 fields/flags */ +#define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK 0x00000001 +#define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES 0x00000002 +#define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN 0x00000004 +#define AR5K_DESC_TX_STATUS0_FILTERED 0x00000008 +/*??? +#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT 0x000000f0 +#define AR5K_DESC_TX_STATUS0_RTS_FAIL_COUNT_S 4 +*/ +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT 0x000000f0 +#define AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT_S 4 +/*??? +#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT 0x00000f00 +#define AR5K_DESC_TX_STATUS0_DATA_FAIL_COUNT_S 8 +*/ +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT 0x00000f00 +#define AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT_S 8 +#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT 0x0000f000 +#define AR5K_DESC_TX_STATUS0_VIRT_COLL_COUNT_S 12 +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP 0xffff0000 +#define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S 16 + +/* TX status word 1 fields/flags */ +#define AR5K_DESC_TX_STATUS1_DONE 0x00000001 +#define AR5K_DESC_TX_STATUS1_SEQ_NUM 0x00001ffe +#define AR5K_DESC_TX_STATUS1_SEQ_NUM_S 1 +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH 0x001fe000 +#define AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH_S 13 +#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX 0x00600000 +#define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S 21 +#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS 0x00800000 +#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA 0x01000000 + +/* + * 5210/5211 hardware TX descriptor + */ +struct ath5k_hw_5210_tx_desc { + struct ath5k_hw_2w_tx_ctl tx_ctl; + struct ath5k_hw_tx_status tx_stat; +} __attribute__ ((packed)); + +/* + * 5212 hardware TX descriptor + */ +struct ath5k_hw_5212_tx_desc { + struct ath5k_hw_4w_tx_ctl tx_ctl; + struct ath5k_hw_tx_status tx_stat; +} __attribute__ ((packed)); + +/* + * common hardware RX descriptor + */ +struct ath5k_hw_all_rx_desc { + struct ath5k_hw_rx_ctl rx_ctl; + union { + struct ath5k_hw_rx_status rx_stat; + struct ath5k_hw_rx_error rx_err; + } u; +} __attribute__ ((packed)); + +/* + * Atheros hardware descriptor + * This is read and written to by the hardware + */ +struct ath5k_desc { + u32 ds_link; /* physical address of the next descriptor */ + u32 ds_data; /* physical address of data buffer (skb) */ + + union { + struct ath5k_hw_5210_tx_desc ds_tx5210; + struct ath5k_hw_5212_tx_desc ds_tx5212; + struct ath5k_hw_all_rx_desc ds_rx; + } ud; +} __attribute__ ((packed)); + +#define AR5K_RXDESC_INTREQ 0x0020 + +#define AR5K_TXDESC_CLRDMASK 0x0001 +#define AR5K_TXDESC_NOACK 0x0002 /*[5211+]*/ +#define AR5K_TXDESC_RTSENA 0x0004 +#define AR5K_TXDESC_CTSENA 0x0008 +#define AR5K_TXDESC_INTREQ 0x0010 +#define AR5K_TXDESC_VEOL 0x0020 /*[5211+]*/ + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/eeprom.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/eeprom.h new file mode 100644 index 000000000..da4543393 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/eeprom.h @@ -0,0 +1,451 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ +#define AR5K_EEPROM_MAGIC_5212 0x0000145c /* 5212 */ +#define AR5K_EEPROM_MAGIC_5211 0x0000145b /* 5211 */ +#define AR5K_EEPROM_MAGIC_5210 0x0000145a /* 5210 */ + +#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */ + +#define AR5K_EEPROM_RFKILL 0x0f +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ +#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2Ghz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */ +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */ +#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */ +#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */ +#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */ +#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */ + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2Ghz (?) */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for a/XR mode (eeprom_init) */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5Ghz */ + +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff)) + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4) +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1) +#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) + +#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5) +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) +#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1) + +#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6) +#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff) +#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7) +#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f) +#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8) +#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff) +#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) +#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) + +#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9) +#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) +#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) +#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) +#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) +#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) +#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) + +#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) +#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x8) +#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x8) +#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) +#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) +#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) +#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 9) & 0x1) +#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 10) & 0x1) + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ +#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */ +#define AR5K_EEPROM_GROUP1_OFFSET 0x0 +#define AR5K_EEPROM_GROUP2_OFFSET 0x5 +#define AR5K_EEPROM_GROUP3_OFFSET 0x37 +#define AR5K_EEPROM_GROUP4_OFFSET 0x46 +#define AR5K_EEPROM_GROUP5_OFFSET 0x55 +#define AR5K_EEPROM_GROUP6_OFFSET 0x65 +#define AR5K_EEPROM_GROUP7_OFFSET 0x69 +#define AR5K_EEPROM_GROUP8_OFFSET 0x6f + +#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP5_OFFSET, 0x0000) +#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP6_OFFSET, 0x0010) +#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP7_OFFSET, 0x0014) + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 +#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PWR_POINTS_5111 11 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_PHASE_CAL 5 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_PD_CURVES 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_PD_GAINS 4 +#define AR5K_EEPROM_N_PD_POINTS 5 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + ret = ath5k_hw_eeprom_read(ah, (_o), &(_v)); \ + if (ret) \ + return ret; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +enum ath5k_ant_setting { + AR5K_ANT_VARIABLE = 0, /* variable by programming */ + AR5K_ANT_FIXED_A = 1, /* fixed to 11a frequencies */ + AR5K_ANT_FIXED_B = 2, /* fixed to 11b frequencies */ + AR5K_ANT_MAX = 3, +}; + +enum ath5k_ctl_mode { + AR5K_CTL_11A = 0, + AR5K_CTL_11B = 1, + AR5K_CTL_11G = 2, + AR5K_CTL_TURBO = 3, + AR5K_CTL_TURBOG = 4, + AR5K_CTL_2GHT20 = 5, + AR5K_CTL_5GHT20 = 6, + AR5K_CTL_2GHT40 = 7, + AR5K_CTL_5GHT40 = 8, + AR5K_CTL_MODE_M = 15, +}; + +/* Default CTL ids for the 3 main reg domains. + * Atheros only uses these by default but vendors + * can have up to 32 different CTLs for different + * scenarios. Note that theese values are ORed with + * the mode id (above) so we can have up to 24 CTL + * datasets out of these 3 main regdomains. That leaves + * 8 ids that can be used by vendors and since 0x20 is + * missing from HAL sources i guess this is the set of + * custom CTLs vendors can use. */ +#define AR5K_CTL_FCC 0x10 +#define AR5K_CTL_CUSTOM 0x20 +#define AR5K_CTL_ETSI 0x30 +#define AR5K_CTL_MKK 0x40 + +/* Indicates a CTL with only mode set and + * no reg domain mapping, such CTLs are used + * for world roaming domains or simply when + * a reg domain is not set */ +#define AR5K_CTL_NO_REGDOMAIN 0xf0 + +/* Indicates an empty (invalid) CTL */ +#define AR5K_CTL_NO_CTL 0xff + +/* Per channel calibration data, used for power table setup */ +struct ath5k_chan_pcal_info_rf5111 { + /* Power levels in half dbm units + * for one power curve. */ + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* PCDAC table steps + * for the above values */ + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* Starting PCDAC step */ + u8 pcdac_min; + /* Final PCDAC step */ + u8 pcdac_max; +}; + +struct ath5k_chan_pcal_info_rf5112 { + /* Power levels in quarter dBm units + * for lower (0) and higher (3) + * level curves in 0.25dB units */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + /* PCDAC table steps + * for the above values */ + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; +}; + +struct ath5k_chan_pcal_info_rf2413 { + /* Starting pwr/pddac values */ + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points + * power levels in 0.5dB units */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +enum ath5k_powertable_type { + AR5K_PWRTABLE_PWR_TO_PCDAC = 0, + AR5K_PWRTABLE_LINEAR_PCDAC = 1, + AR5K_PWRTABLE_PWR_TO_PDADC = 2, +}; + +struct ath5k_pdgain_info { + u8 pd_points; + u8 *pd_step; + /* Power values are in + * 0.25dB units */ + s16 *pd_pwr; +}; + +struct ath5k_chan_pcal_info { + /* Frequency */ + u16 freq; + /* Tx power boundaries */ + s16 max_pwr; + s16 min_pwr; + union { + struct ath5k_chan_pcal_info_rf5111 rf5111_info; + struct ath5k_chan_pcal_info_rf5112 rf5112_info; + struct ath5k_chan_pcal_info_rf2413 rf2413_info; + }; + /* Raw values used by phy code + * Curves are stored in order from lower + * gain to higher gain (max txpower -> min txpower) */ + struct ath5k_pdgain_info *pd_curves; +}; + +/* Per rate calibration data for each mode, + * used for rate power table setup. + * Note: Values in 0.5dB units */ +struct ath5k_rate_pcal_info { + u16 freq; /* Frequency */ + /* Power level for 6-24Mbit/s rates or + * 1Mb rate */ + u16 target_power_6to24; + /* Power level for 36Mbit rate or + * 2Mb rate */ + u16 target_power_36; + /* Power level for 48Mbit rate or + * 5.5Mbit rate */ + u16 target_power_48; + /* Power level for 54Mbit rate or + * 11Mbit rate */ + u16 target_power_54; +}; + +/* Power edges for conformance test limits */ +struct ath5k_edge_power { + u16 freq; + u16 edge; /* in half dBm */ + int flag; +}; + +/* EEPROM calibration data */ +struct ath5k_eeprom_info { + + /* Header information */ + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u8 ee_rfkill_pin; + int ee_rfkill_pol; + int ee_is_hb63; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_misc2; + u16 ee_misc3; + u16 ee_misc4; + u16 ee_misc5; + u16 ee_misc6; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + + /* Power calibration data */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + + /* Number of pd gain curves per mode */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */ + u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS]; + + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Per rate target power levels */ + u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Conformance test limits (Unused) */ + u8 ee_ctls; + u8 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pd_gain_overlap; + + u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; +}; + diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/reg.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/reg.h new file mode 100644 index 000000000..7070d1543 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/reg.h @@ -0,0 +1,2589 @@ +/* + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Register values for Atheros 5210/5211/5212 cards from OpenBSD's ar5k + * maintained by Reyk Floeter + * + * I tried to document those registers by looking at ar5k code, some + * 802.11 (802.11e mostly) papers and by reading various public available + * Atheros presentations and papers like these: + * + * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf + * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf + * + * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf + * + * This file also contains register values found on a memory dump of + * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal + * released by Atheros and on various debug messages found on the net. + */ + + + +/*====MAC DMA REGISTERS====*/ + +/* + * AR5210-Specific TXDP registers + * 5210 has only 2 transmit queues so no DCU/QCU, just + * 2 transmit descriptor pointers... + */ +#define AR5K_NOQCU_TXDP0 0x0000 /* Queue 0 - data */ +#define AR5K_NOQCU_TXDP1 0x0004 /* Queue 1 - beacons */ + +/* + * Mac Control Register + */ +#define AR5K_CR 0x0008 /* Register Address */ +#define AR5K_CR_TXE0 0x00000001 /* TX Enable for queue 0 on 5210 */ +#define AR5K_CR_TXE1 0x00000002 /* TX Enable for queue 1 on 5210 */ +#define AR5K_CR_RXE 0x00000004 /* RX Enable */ +#define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ +#define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ +#define AR5K_CR_RXD 0x00000020 /* RX Disable */ +#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ + +/* + * RX Descriptor Pointer register + */ +#define AR5K_RXDP 0x000c + +/* + * Configuration and status register + */ +#define AR5K_CFG 0x0014 /* Register Address */ +#define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ +#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ +#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ +#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ +#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ +#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */ +#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ +#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ +#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ +#define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ +#define AR5K_CFG_TXCNT_S 11 +#define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ +#define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ +#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ +#define AR5K_CFG_PCI_THRES_S 17 + +/* + * Interrupt enable register + */ +#define AR5K_IER 0x0024 /* Register Address */ +#define AR5K_IER_DISABLE 0x00000000 /* Disable card interrupts */ +#define AR5K_IER_ENABLE 0x00000001 /* Enable card interrupts */ + + +/* + * 0x0028 is Beacon Control Register on 5210 + * and first RTS duration register on 5211 + */ + +/* + * Beacon control register [5210] + */ +#define AR5K_BCR 0x0028 /* Register Address */ +#define AR5K_BCR_AP 0x00000000 /* AP mode */ +#define AR5K_BCR_ADHOC 0x00000001 /* Ad-Hoc mode */ +#define AR5K_BCR_BDMAE 0x00000002 /* DMA enable */ +#define AR5K_BCR_TQ1FV 0x00000004 /* Use Queue1 for CAB traffic */ +#define AR5K_BCR_TQ1V 0x00000008 /* Use Queue1 for Beacon traffic */ +#define AR5K_BCR_BCGET 0x00000010 + +/* + * First RTS duration register [5211] + */ +#define AR5K_RTSD0 0x0028 /* Register Address */ +#define AR5K_RTSD0_6 0x000000ff /* 6Mb RTS duration mask (?) */ +#define AR5K_RTSD0_6_S 0 /* 6Mb RTS duration shift (?) */ +#define AR5K_RTSD0_9 0x0000ff00 /* 9Mb*/ +#define AR5K_RTSD0_9_S 8 +#define AR5K_RTSD0_12 0x00ff0000 /* 12Mb*/ +#define AR5K_RTSD0_12_S 16 +#define AR5K_RTSD0_18 0xff000000 /* 16Mb*/ +#define AR5K_RTSD0_18_S 24 + + +/* + * 0x002c is Beacon Status Register on 5210 + * and second RTS duration register on 5211 + */ + +/* + * Beacon status register [5210] + * + * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR + * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning + * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR). + * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i + * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what + * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR. + */ +#define AR5K_BSR 0x002c /* Register Address */ +#define AR5K_BSR_BDLYSW 0x00000001 /* SW Beacon delay (?) */ +#define AR5K_BSR_BDLYDMA 0x00000002 /* DMA Beacon delay (?) */ +#define AR5K_BSR_TXQ1F 0x00000004 /* Beacon queue (1) finished */ +#define AR5K_BSR_ATIMDLY 0x00000008 /* ATIM delay (?) */ +#define AR5K_BSR_SNPADHOC 0x00000100 /* Ad-hoc mode set (?) */ +#define AR5K_BSR_SNPBDMAE 0x00000200 /* Beacon DMA enabled (?) */ +#define AR5K_BSR_SNPTQ1FV 0x00000400 /* Queue1 is used for CAB traffic (?) */ +#define AR5K_BSR_SNPTQ1V 0x00000800 /* Queue1 is used for Beacon traffic (?) */ +#define AR5K_BSR_SNAPSHOTSVALID 0x00001000 /* BCR snapshots are valid (?) */ +#define AR5K_BSR_SWBA_CNT 0x00ff0000 + +/* + * Second RTS duration register [5211] + */ +#define AR5K_RTSD1 0x002c /* Register Address */ +#define AR5K_RTSD1_24 0x000000ff /* 24Mb */ +#define AR5K_RTSD1_24_S 0 +#define AR5K_RTSD1_36 0x0000ff00 /* 36Mb */ +#define AR5K_RTSD1_36_S 8 +#define AR5K_RTSD1_48 0x00ff0000 /* 48Mb */ +#define AR5K_RTSD1_48_S 16 +#define AR5K_RTSD1_54 0xff000000 /* 54Mb */ +#define AR5K_RTSD1_54_S 24 + + +/* + * Transmit configuration register + */ +#define AR5K_TXCFG 0x0030 /* Register Address */ +#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ +#define AR5K_TXCFG_SDMAMR_S 0 +#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ +#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL_S 4 +#define AR5K_TXCFG_TXFULL_0B 0x00000000 +#define AR5K_TXCFG_TXFULL_64B 0x00000010 +#define AR5K_TXCFG_TXFULL_128B 0x00000020 +#define AR5K_TXCFG_TXFULL_192B 0x00000030 +#define AR5K_TXCFG_TXFULL_256B 0x00000040 +#define AR5K_TXCFG_TXCONT_EN 0x00000080 +#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ +#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ +#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ +#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ +#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ +#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ +#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ +#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ +#define AR5K_TXCFG_DCU_DBL_BUF_DIS 0x00008000 /* Disable double buffering on DCU */ +#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ + +/* + * Receive configuration register + */ +#define AR5K_RXCFG 0x0034 /* Register Address */ +#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ +#define AR5K_RXCFG_SDMAMW_S 0 +#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ +#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ +#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ +#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ +#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ + +/* + * Receive jumbo descriptor last address register + * Only found in 5211 (?) + */ +#define AR5K_RXJLA 0x0038 + +/* + * MIB control register + */ +#define AR5K_MIBC 0x0040 /* Register Address */ +#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ +#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ +#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ +#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ + +/* + * Timeout prescale register + */ +#define AR5K_TOPS 0x0044 +#define AR5K_TOPS_M 0x0000ffff + +/* + * Receive timeout register (no frame received) + */ +#define AR5K_RXNOFRM 0x0048 +#define AR5K_RXNOFRM_M 0x000003ff + +/* + * Transmit timeout register (no frame sent) + */ +#define AR5K_TXNOFRM 0x004c +#define AR5K_TXNOFRM_M 0x000003ff +#define AR5K_TXNOFRM_QCU 0x000ffc00 +#define AR5K_TXNOFRM_QCU_S 10 + +/* + * Receive frame gap timeout register + */ +#define AR5K_RPGTO 0x0050 +#define AR5K_RPGTO_M 0x000003ff + +/* + * Receive frame count limit register + */ +#define AR5K_RFCNT 0x0054 +#define AR5K_RFCNT_M 0x0000001f /* [5211+] (?) */ +#define AR5K_RFCNT_RFCL 0x0000000f /* [5210] */ + +/* + * Misc settings register + * (reserved0-3) + */ +#define AR5K_MISC 0x0058 /* Register Address */ +#define AR5K_MISC_DMA_OBS_M 0x000001e0 +#define AR5K_MISC_DMA_OBS_S 5 +#define AR5K_MISC_MISC_OBS_M 0x00000e00 +#define AR5K_MISC_MISC_OBS_S 9 +#define AR5K_MISC_MAC_OBS_LSB_M 0x00007000 +#define AR5K_MISC_MAC_OBS_LSB_S 12 +#define AR5K_MISC_MAC_OBS_MSB_M 0x00038000 +#define AR5K_MISC_MAC_OBS_MSB_S 15 +#define AR5K_MISC_LED_DECAY 0x001c0000 /* [5210] */ +#define AR5K_MISC_LED_BLINK 0x00e00000 /* [5210] */ + +/* + * QCU/DCU clock gating register (5311) + * (reserved4-5) + */ +#define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ +#define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ +#define AR5K_QCUDCU_CLKGT_DCU 0x07ff0000 /* Mask for DCU clock */ + +/* + * Interrupt Status Registers + * + * For 5210 there is only one status register but for + * 5211/5212 we have one primary and 4 secondary registers. + * So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212. + * Most of these bits are common for all chipsets. + */ +#define AR5K_ISR 0x001c /* Register Address [5210] */ +#define AR5K_PISR 0x0080 /* Register Address [5211+] */ +#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly recieved */ +#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */ +#define AR5K_ISR_RXERR 0x00000004 /* Receive error */ +#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */ +#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */ +#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */ +#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */ +#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */ +#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */ +#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */ +#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ +#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ +#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ +#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ +#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ +#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ +#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ +#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ +#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ +#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ +#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_ISR_TIM 0x00800000 /* [5211+] */ +#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */ +#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */ +#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */ +#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ + +/* + * Secondary status registers [5211+] (0 - 4) + * + * These give the status for each QCU, only QCUs 0-9 are + * represented. + */ +#define AR5K_SISR0 0x0084 /* Register Address [5211+] */ +#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SISR0_QCU_TXOK_S 0 +#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SISR0_QCU_TXDESC_S 16 + +#define AR5K_SISR1 0x0088 /* Register Address [5211+] */ +#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SISR1_QCU_TXERR_S 0 +#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SISR1_QCU_TXEOL_S 16 + +#define AR5K_SISR2 0x008c /* Register Address [5211+] */ +#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SISR2_QCU_TXURN_S 0 +#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */ +#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ +#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ +#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */ + +#define AR5K_SISR3 0x0090 /* Register Address [5211+] */ +#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SISR3_QCBRORN_S 0 +#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SISR3_QCBRURN_S 16 + +#define AR5K_SISR4 0x0094 /* Register Address [5211+] */ +#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SISR4_QTRIG_S 0 + +/* + * Shadow read-and-clear interrupt status registers [5211+] + */ +#define AR5K_RAC_PISR 0x00c0 /* Read and clear PISR */ +#define AR5K_RAC_SISR0 0x00c4 /* Read and clear SISR0 */ +#define AR5K_RAC_SISR1 0x00c8 /* Read and clear SISR1 */ +#define AR5K_RAC_SISR2 0x00cc /* Read and clear SISR2 */ +#define AR5K_RAC_SISR3 0x00d0 /* Read and clear SISR3 */ +#define AR5K_RAC_SISR4 0x00d4 /* Read and clear SISR4 */ + +/* + * Interrupt Mask Registers + * + * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary + * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match. + */ +#define AR5K_IMR 0x0020 /* Register Address [5210] */ +#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */ +#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly recieved*/ +#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/ +#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/ +#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/ +#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/ +#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/ +#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/ +#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/ +#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/ +#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/ +#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ +#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ +#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ +#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ +#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ +#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ +#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ +#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */ +#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ +#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ +#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ +#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ +#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ +#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */ +#define AR5K_IMR_TIM 0x00800000 /* [5211+] */ +#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT, + CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */ +#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ +#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */ +#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */ +#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */ + +/* + * Secondary interrupt mask registers [5211+] (0 - 4) + */ +#define AR5K_SIMR0 0x00a4 /* Register Address [5211+] */ +#define AR5K_SIMR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */ +#define AR5K_SIMR0_QCU_TXOK_S 0 +#define AR5K_SIMR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */ +#define AR5K_SIMR0_QCU_TXDESC_S 16 + +#define AR5K_SIMR1 0x00a8 /* Register Address [5211+] */ +#define AR5K_SIMR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */ +#define AR5K_SIMR1_QCU_TXERR_S 0 +#define AR5K_SIMR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */ +#define AR5K_SIMR1_QCU_TXEOL_S 16 + +#define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ +#define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ +#define AR5K_SIMR2_QCU_TXURN_S 0 +#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */ +#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ +#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ +#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ +#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ +#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */ + +#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ +#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */ +#define AR5K_SIMR3_QCBRORN_S 0 +#define AR5K_SIMR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */ +#define AR5K_SIMR3_QCBRURN_S 16 + +#define AR5K_SIMR4 0x00b4 /* Register Address [5211+] */ +#define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ +#define AR5K_SIMR4_QTRIG_S 0 + +/* + * DMA Debug registers 0-7 + * 0xe0 - 0xfc + */ + +/* + * Decompression mask registers [5212+] + */ +#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ +#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ + +/* + * Wake On Wireless pattern control register [5212+] + */ +#define AR5K_WOW_PCFG 0x0410 /* Register Address */ +#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ +#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ +#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ +#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ +#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ +#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ +#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ +#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ +#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ + +/* + * Wake On Wireless pattern index register (?) [5212+] + */ +#define AR5K_WOW_PAT_IDX 0x0414 + +/* + * Wake On Wireless pattern data register [5212+] + */ +#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ +#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ +#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ +#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ +#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ +#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ +#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ + +/* + * Decompression configuration registers [5212+] + */ +#define AR5K_DCCFG 0x0420 /* Register Address */ +#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ +#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ +#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ +#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ + +/* + * Compression configuration registers [5212+] + */ +#define AR5K_CCFG 0x0600 /* Register Address */ +#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ +#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ + +#define AR5K_CCFG_CCU 0x0604 /* Register Address */ +#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ +#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ +#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ +#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ +#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ + +/* + * Compression performance counter registers [5212+] + */ +#define AR5K_CPC0 0x0610 /* Compression performance counter 0 */ +#define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ +#define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ +#define AR5K_CPC3 0x061c /* Compression performance counter 3 */ +#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ + + +/* + * Queue control unit (QCU) registers [5211+] + * + * Card has 12 TX Queues but i see that only 0-9 are used (?) + * both in binary HAL (see ah.h) and ar5k. Each queue has it's own + * TXDP at addresses 0x0800 - 0x082c, a CBR (Constant Bit Rate) + * configuration register (0x08c0 - 0x08ec), a ready time configuration + * register (0x0900 - 0x092c), a misc configuration register (0x09c0 - + * 0x09ec) and a status register (0x0a00 - 0x0a2c). We also have some + * global registers, QCU transmit enable/disable and "one shot arm (?)" + * set/clear, which contain status for all queues (we shift by 1 for each + * queue). To access these registers easily we define some macros here + * that are used inside HAL. For more infos check out *_tx_queue functs. + */ + +/* + * Generic QCU Register access macros + */ +#define AR5K_QUEUE_REG(_r, _q) (((_q) << 2) + _r) +#define AR5K_QCU_GLOBAL_READ(_r, _q) (AR5K_REG_READ(_r) & (1 << _q)) +#define AR5K_QCU_GLOBAL_WRITE(_r, _q) AR5K_REG_WRITE(_r, (1 << _q)) + +/* + * QCU Transmit descriptor pointer registers + */ +#define AR5K_QCU_TXDP_BASE 0x0800 /* Register Address - Queue0 TXDP */ +#define AR5K_QUEUE_TXDP(_q) AR5K_QUEUE_REG(AR5K_QCU_TXDP_BASE, _q) + +/* + * QCU Transmit enable register + */ +#define AR5K_QCU_TXE 0x0840 +#define AR5K_ENABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXE, _q) +#define AR5K_QUEUE_ENABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXE, _q) + +/* + * QCU Transmit disable register + */ +#define AR5K_QCU_TXD 0x0880 +#define AR5K_DISABLE_QUEUE(_q) AR5K_QCU_GLOBAL_WRITE(AR5K_QCU_TXD, _q) +#define AR5K_QUEUE_DISABLED(_q) AR5K_QCU_GLOBAL_READ(AR5K_QCU_TXD, _q) + +/* + * QCU Constant Bit Rate configuration registers + */ +#define AR5K_QCU_CBRCFG_BASE 0x08c0 /* Register Address - Queue0 CBRCFG */ +#define AR5K_QCU_CBRCFG_INTVAL 0x00ffffff /* CBR Interval mask */ +#define AR5K_QCU_CBRCFG_INTVAL_S 0 +#define AR5K_QCU_CBRCFG_ORN_THRES 0xff000000 /* CBR overrun threshold mask */ +#define AR5K_QCU_CBRCFG_ORN_THRES_S 24 +#define AR5K_QUEUE_CBRCFG(_q) AR5K_QUEUE_REG(AR5K_QCU_CBRCFG_BASE, _q) + +/* + * QCU Ready time configuration registers + */ +#define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ +#define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ +#define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 +#define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ +#define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) + +/* + * QCU one shot arm set registers + */ +#define AR5K_QCU_ONESHOTARM_SET 0x0940 /* Register Address -QCU "one shot arm set (?)" */ +#define AR5K_QCU_ONESHOTARM_SET_M 0x0000ffff + +/* + * QCU one shot arm clear registers + */ +#define AR5K_QCU_ONESHOTARM_CLEAR 0x0980 /* Register Address -QCU "one shot arm clear (?)" */ +#define AR5K_QCU_ONESHOTARM_CLEAR_M 0x0000ffff + +/* + * QCU misc registers + */ +#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ +#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ +#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ +#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */ +#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */ +#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ +#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */ +#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */ +#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */ +#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ +#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ +#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ +#define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) + + +/* + * QCU status registers + */ +#define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ +#define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ +#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ +#define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) + +/* + * QCU ready time shutdown register + */ +#define AR5K_QCU_RDYTIMESHDN 0x0a40 +#define AR5K_QCU_RDYTIMESHDN_M 0x000003ff + +/* + * QCU compression buffer base registers [5212+] + */ +#define AR5K_QCU_CBB_SELECT 0x0b00 +#define AR5K_QCU_CBB_ADDR 0x0b04 +#define AR5K_QCU_CBB_ADDR_S 9 + +/* + * QCU compression buffer configuration register [5212+] + * (buffer size) + */ +#define AR5K_QCU_CBCFG 0x0b08 + + + +/* + * Distributed Coordination Function (DCF) control unit (DCU) + * registers [5211+] + * + * These registers control the various characteristics of each queue + * for 802.11e (WME) combatibility so they go together with + * QCU registers in pairs. For each queue we have a QCU mask register, + * (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c), + * a retry limit register (0x1080 - 0x10ac), a channel time register + * (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and + * a sequence number register (0x1140 - 0x116c). It seems that "global" + * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k). + * We use the same macros here for easier register access. + * + */ + +/* + * DCU QCU mask registers + */ +#define AR5K_DCU_QCUMASK_BASE 0x1000 /* Register Address -Queue0 DCU_QCUMASK */ +#define AR5K_DCU_QCUMASK_M 0x000003ff +#define AR5K_QUEUE_QCUMASK(_q) AR5K_QUEUE_REG(AR5K_DCU_QCUMASK_BASE, _q) + +/* + * DCU local Inter Frame Space settings register + */ +#define AR5K_DCU_LCL_IFS_BASE 0x1040 /* Register Address -Queue0 DCU_LCL_IFS */ +#define AR5K_DCU_LCL_IFS_CW_MIN 0x000003ff /* Minimum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MIN_S 0 +#define AR5K_DCU_LCL_IFS_CW_MAX 0x000ffc00 /* Maximum Contention Window */ +#define AR5K_DCU_LCL_IFS_CW_MAX_S 10 +#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */ +#define AR5K_DCU_LCL_IFS_AIFS_S 20 +#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */ +#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q) + +/* + * DCU retry limit registers + */ +#define AR5K_DCU_RETRY_LMT_BASE 0x1080 /* Register Address -Queue0 DCU_RETRY_LMT */ +#define AR5K_DCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ +#define AR5K_DCU_RETRY_LMT_SH_RETRY_S 0 +#define AR5K_DCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry limit mask */ +#define AR5K_DCU_RETRY_LMT_LG_RETRY_S 4 +#define AR5K_DCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask (?) */ +#define AR5K_DCU_RETRY_LMT_SSH_RETRY_S 8 +#define AR5K_DCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask (?) */ +#define AR5K_DCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_QUEUE_DFS_RETRY_LIMIT(_q) AR5K_QUEUE_REG(AR5K_DCU_RETRY_LMT_BASE, _q) + +/* + * DCU channel time registers + */ +#define AR5K_DCU_CHAN_TIME_BASE 0x10c0 /* Register Address -Queue0 DCU_CHAN_TIME */ +#define AR5K_DCU_CHAN_TIME_DUR 0x000fffff /* Channel time duration */ +#define AR5K_DCU_CHAN_TIME_DUR_S 0 +#define AR5K_DCU_CHAN_TIME_ENABLE 0x00100000 /* Enable channel time */ +#define AR5K_QUEUE_DFS_CHANNEL_TIME(_q) AR5K_QUEUE_REG(AR5K_DCU_CHAN_TIME_BASE, _q) + +/* + * DCU misc registers [5211+] + * + * Note: Arbiter lockout control controls the + * behaviour on low priority queues when we have multiple queues + * with pending frames. Intra-frame lockout means we wait until + * the queue's current frame transmits (with post frame backoff and bursting) + * before we transmit anything else and global lockout means we + * wait for the whole queue to finish before higher priority queues + * can transmit (this is used on beacon and CAB queues). + * No lockout means there is no special handling. + */ +#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ +#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */ +#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series + station RTS/data failure count + reset policy (?) */ +#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series + CW reset policy */ +#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */ +#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ +#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ +#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ +#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ +#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1 +#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ +#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 +#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ +#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ +#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ +#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ +#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ +#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ +#define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ +#define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) + +/* + * DCU frame sequence number registers + */ +#define AR5K_DCU_SEQNUM_BASE 0x1140 +#define AR5K_DCU_SEQNUM_M 0x00000fff +#define AR5K_QUEUE_DCU_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) + +/* + * DCU global IFS SIFS register + */ +#define AR5K_DCU_GBL_IFS_SIFS 0x1030 +#define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff + +/* + * DCU global IFS slot interval register + */ +#define AR5K_DCU_GBL_IFS_SLOT 0x1070 +#define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff + +/* + * DCU global IFS EIFS register + */ +#define AR5K_DCU_GBL_IFS_EIFS 0x10b0 +#define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff + +/* + * DCU global IFS misc register + * + * LFSR stands for Linear Feedback Shift Register + * and it's used for generating pseudo-random + * number sequences. + * + * (If i understand corectly, random numbers are + * used for idle sensing -multiplied with cwmin/max etc-) + */ +#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ +#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ +#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10 +#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ + +/* + * DCU frame prefetch control register + */ +#define AR5K_DCU_FP 0x1230 /* Register Address */ +#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ +#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ +#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ + +/* + * DCU transmit pause control/status register + */ +#define AR5K_DCU_TXP 0x1270 /* Register Address */ +#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ +#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ + +/* + * DCU transmit filter table 0 (32 entries) + * each entry contains a 32bit slice of the + * 128bit tx filter for each DCU (4 slices per DCU) + */ +#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 +#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) + +/* + * DCU transmit filter table 1 (16 entries) + */ +#define AR5K_DCU_TX_FILTER_1_BASE 0x103c +#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + (_n * 64)) + +/* + * DCU clear transmit filter register + */ +#define AR5K_DCU_TX_FILTER_CLR 0x143c + +/* + * DCU set transmit filter register + */ +#define AR5K_DCU_TX_FILTER_SET 0x147c + +/* + * Reset control register + */ +#define AR5K_RESET_CTL 0x4000 /* Register Address */ +#define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ +#define AR5K_RESET_CTL_DMA 0x00000002 /* DMA (Rx/Tx) reset [5210] */ +#define AR5K_RESET_CTL_BASEBAND 0x00000002 /* Baseband reset [5211+] */ +#define AR5K_RESET_CTL_MAC 0x00000004 /* MAC reset (PCU+Baseband ?) [5210] */ +#define AR5K_RESET_CTL_PHY 0x00000008 /* PHY reset [5210] */ +#define AR5K_RESET_CTL_PCI 0x00000010 /* PCI Core reset (interrupts etc) */ + +/* + * Sleep control register + */ +#define AR5K_SLEEP_CTL 0x4004 /* Register Address */ +#define AR5K_SLEEP_CTL_SLDUR 0x0000ffff /* Sleep duration mask */ +#define AR5K_SLEEP_CTL_SLDUR_S 0 +#define AR5K_SLEEP_CTL_SLE 0x00030000 /* Sleep enable mask */ +#define AR5K_SLEEP_CTL_SLE_S 16 +#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */ +#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ +#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */ +#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ +#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */ +#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */ +#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */ + +/* + * Interrupt pending register + */ +#define AR5K_INTPEND 0x4008 +#define AR5K_INTPEND_M 0x00000001 + +/* + * Sleep force register + */ +#define AR5K_SFR 0x400c +#define AR5K_SFR_EN 0x00000001 + +/* + * PCI configuration register + * TODO: Fix LED stuff + */ +#define AR5K_PCICFG 0x4010 /* Register Address */ +#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */ +#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ +#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ +#define AR5K_PCICFG_EESIZE_S 3 +#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */ +#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */ +#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */ +#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */ +#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */ +#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */ +#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */ +#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */ +#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */ +#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */ +#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */ +#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ +#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/ +#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ +#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ +#define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ +#define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ +#define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ +#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ +#define AR5K_PCICFG_LEDBLINK_S 20 +#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ +#define AR5K_PCICFG_LEDSTATE \ + (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ + AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */ +#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24 + +/* + * "General Purpose Input/Output" (GPIO) control register + * + * I'm not sure about this but after looking at the code + * for all chipsets here is what i got. + * + * We have 6 GPIOs (pins), each GPIO has 4 modes (2 bits) + * Mode 0 -> always input + * Mode 1 -> output when GPIODO for this GPIO is set to 0 + * Mode 2 -> output when GPIODO for this GPIO is set to 1 + * Mode 3 -> always output + * + * For more infos check out get_gpio/set_gpio and + * set_gpio_input/set_gpio_output functs. + * For more infos on gpio interrupt check out set_gpio_intr. + */ +#define AR5K_NUM_GPIO 6 + +#define AR5K_GPIOCR 0x4014 /* Register Address */ +#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */ +#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */ +#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */ +#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */ +#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */ +#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */ +#define AR5K_GPIOCR_OUT(n) (3 << ((n) * 2)) /* Mode 3 for pin n */ +#define AR5K_GPIOCR_INT_SEL(n) ((n) << 12) /* Interrupt for GPIO pin n */ + +/* + * "General Purpose Input/Output" (GPIO) data output register + */ +#define AR5K_GPIODO 0x4018 + +/* + * "General Purpose Input/Output" (GPIO) data input register + */ +#define AR5K_GPIODI 0x401c +#define AR5K_GPIODI_M 0x0000002f + +/* + * Silicon revision register + */ +#define AR5K_SREV 0x4020 /* Register Address */ +#define AR5K_SREV_REV 0x0000000f /* Mask for revision */ +#define AR5K_SREV_REV_S 0 +#define AR5K_SREV_VER 0x000000ff /* Mask for version */ +#define AR5K_SREV_VER_S 4 + +/* + * TXE write posting register + */ +#define AR5K_TXEPOST 0x4028 + +/* + * QCU sleep mask + */ +#define AR5K_QCU_SLEEP_MASK 0x402c + +/* 0x4068 is compression buffer configuration + * register on 5414 and pm configuration register + * on 5424 and newer pci-e chips. */ + +/* + * Compression buffer configuration + * register (enable/disable) [5414] + */ +#define AR5K_5414_CBCFG 0x4068 +#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */ + +/* + * PCI-E Power managment configuration + * and status register [5424+] + */ +#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */ +/* Only 5424 */ +#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1 + when d2_sleep_en is asserted */ +#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */ +#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */ +#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes + down */ +/* Wake On Wireless */ +#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */ +#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */ +#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */ +#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080 +#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100 +#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200 +#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400 + +/* + * PCI-E Workaround enable register + */ +#define AR5K_PCIE_WAEN 0x407c + +/* + * PCI-E Serializer/Desirializer + * registers + */ +#define AR5K_PCIE_SERDES 0x4080 +#define AR5K_PCIE_SERDES_RESET 0x4084 + +/*====EEPROM REGISTERS====*/ + +/* + * EEPROM access registers + * + * Here we got a difference between 5210/5211-12 + * read data register for 5210 is at 0x6800 and + * status register is at 0x6c00. There is also + * no eeprom command register on 5210 and the + * offsets are different. + * + * To read eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * read AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * and read eeprom data register. + * + * 5211 - write offset to AR5K_EEPROM_BASE + * 5212 write AR5K_EEPROM_CMD_READ on AR5K_EEPROM_CMD + * check the eeprom status register + * and read eeprom data register. + * + * To write eeprom data for a specific offset: + * 5210 - enable eeprom access (AR5K_PCICFG_EEAE) + * write data to AR5K_EEPROM_BASE +(4 * offset) + * check the eeprom status register + * 5211 - write AR5K_EEPROM_CMD_RESET on AR5K_EEPROM_CMD + * 5212 write offset to AR5K_EEPROM_BASE + * write data to data register + * write AR5K_EEPROM_CMD_WRITE on AR5K_EEPROM_CMD + * check the eeprom status register + * + * For more infos check eeprom_* functs and the ar5k.c + * file posted in madwifi-devel mailing list. + * http://sourceforge.net/mailarchive/message.php?msg_id=8966525 + * + */ +#define AR5K_EEPROM_BASE 0x6000 + +/* + * EEPROM data register + */ +#define AR5K_EEPROM_DATA_5211 0x6004 +#define AR5K_EEPROM_DATA_5210 0x6800 +#define AR5K_EEPROM_DATA (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211) + +/* + * EEPROM command register + */ +#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */ +#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */ +#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */ +#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */ + +/* + * EEPROM status register + */ +#define AR5K_EEPROM_STAT_5210 0x6c00 /* Register Address [5210] */ +#define AR5K_EEPROM_STAT_5211 0x600c /* Register Address [5211+] */ +#define AR5K_EEPROM_STATUS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211) +#define AR5K_EEPROM_STAT_RDERR 0x00000001 /* EEPROM read failed */ +#define AR5K_EEPROM_STAT_RDDONE 0x00000002 /* EEPROM read successful */ +#define AR5K_EEPROM_STAT_WRERR 0x00000004 /* EEPROM write failed */ +#define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ + +/* + * EEPROM config register + */ +#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ +#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */ +#define AR5K_EEPROM_CFG_SIZE_AUTO 0 +#define AR5K_EEPROM_CFG_SIZE_4KBIT 1 +#define AR5K_EEPROM_CFG_SIZE_8KBIT 2 +#define AR5K_EEPROM_CFG_SIZE_16KBIT 3 +#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ +#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ +#define AR5K_EEPROM_CFG_CLK_RATE_S 3 +#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0 +#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1 +#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2 +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */ +#define AR5K_EEPROM_CFG_PROT_KEY_S 8 +#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ + + +/* + * TODO: Wake On Wireless registers + * Range 0x7000 - 0x7ce0 + */ + +/* + * Protocol Control Unit (PCU) registers + */ +/* + * Used for checking initial register writes + * during channel reset (see reset func) + */ +#define AR5K_PCU_MIN 0x8000 +#define AR5K_PCU_MAX 0x8fff + +/* + * First station id register (Lower 32 bits of MAC address) + */ +#define AR5K_STA_ID0 0x8000 +#define AR5K_STA_ID0_ARRD_L32 0xffffffff + +/* + * Second station id register (Upper 16 bits of MAC address + PCU settings) + */ +#define AR5K_STA_ID1 0x8004 /* Register Address */ +#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */ +#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ +#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ +#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ +#define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ +#define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ +#define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ +#define AR5K_STA_ID1_PCF_5210 0x00200000 /* Enable PCF on [5210]*/ +#define AR5K_STA_ID1_PCF (ah->ah_version == AR5K_AR5210 ? \ + AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) +#define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ +#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ +#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ +#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */ +#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */ +#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */ +#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ +#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */ +#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */ + +/* + * First BSSID register (MAC address, lower 32bits) + */ +#define AR5K_BSS_ID0 0x8008 + +/* + * Second BSSID register (MAC address in upper 16 bits) + * + * AID: Association ID + */ +#define AR5K_BSS_ID1 0x800c +#define AR5K_BSS_ID1_AID 0xffff0000 +#define AR5K_BSS_ID1_AID_S 16 + +/* + * Backoff slot time register + */ +#define AR5K_SLOT_TIME 0x8010 + +/* + * ACK/CTS timeout register + */ +#define AR5K_TIME_OUT 0x8014 /* Register Address */ +#define AR5K_TIME_OUT_ACK 0x00001fff /* ACK timeout mask */ +#define AR5K_TIME_OUT_ACK_S 0 +#define AR5K_TIME_OUT_CTS 0x1fff0000 /* CTS timeout mask */ +#define AR5K_TIME_OUT_CTS_S 16 + +/* + * RSSI threshold register + */ +#define AR5K_RSSI_THR 0x8018 /* Register Address */ +#define AR5K_RSSI_THR_M 0x000000ff /* Mask for RSSI threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5210 0x00000700 /* Mask for Beacon Missed threshold [5210] */ +#define AR5K_RSSI_THR_BMISS_5210_S 8 +#define AR5K_RSSI_THR_BMISS_5211 0x0000ff00 /* Mask for Beacon Missed threshold [5211+] */ +#define AR5K_RSSI_THR_BMISS_5211_S 8 +#define AR5K_RSSI_THR_BMISS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RSSI_THR_BMISS_5210 : AR5K_RSSI_THR_BMISS_5211) +#define AR5K_RSSI_THR_BMISS_S 8 + +/* + * 5210 has more PCU registers because there is no QCU/DCU + * so queue parameters are set here, this way a lot common + * registers have different address for 5210. To make things + * easier we define a macro based on ah->ah_version for common + * registers with different addresses and common flags. + */ + +/* + * Retry limit register + * + * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) + */ +#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 +#define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ +#define AR5K_NODCU_RETRY_LMT_LG_RETRY_S 4 +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY 0x00003f00 /* Station short retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SSH_RETRY_S 8 +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY 0x000fc000 /* Station long retry limit mask */ +#define AR5K_NODCU_RETRY_LMT_SLG_RETRY_S 14 +#define AR5K_NODCU_RETRY_LMT_CW_MIN 0x3ff00000 /* Minimum contention window mask */ +#define AR5K_NODCU_RETRY_LMT_CW_MIN_S 20 + +/* + * Transmit latency register + */ +#define AR5K_USEC_5210 0x8020 /* Register Address [5210] */ +#define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ +#define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ + AR5K_USEC_5210 : AR5K_USEC_5211) +#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ +#define AR5K_USEC_1_S 0 +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ +#define AR5K_USEC_32_S 7 +#define AR5K_USEC_TX_LATENCY_5211 0x007fc000 +#define AR5K_USEC_TX_LATENCY_5211_S 14 +#define AR5K_USEC_RX_LATENCY_5211 0x1f800000 +#define AR5K_USEC_RX_LATENCY_5211_S 23 +#define AR5K_USEC_TX_LATENCY_5210 0x000fc000 /* also for 5311 */ +#define AR5K_USEC_TX_LATENCY_5210_S 14 +#define AR5K_USEC_RX_LATENCY_5210 0x03f00000 /* also for 5311 */ +#define AR5K_USEC_RX_LATENCY_5210_S 20 + +/* + * PCU beacon control register + */ +#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ +#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ +#define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_5210 : AR5K_BEACON_5211) +#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ +#define AR5K_BEACON_PERIOD_S 0 +#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ +#define AR5K_BEACON_TIM_S 16 +#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ +#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ + +/* + * CFP period register + */ +#define AR5K_CFP_PERIOD_5210 0x8028 +#define AR5K_CFP_PERIOD_5211 0x8024 +#define AR5K_CFP_PERIOD (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_PERIOD_5210 : AR5K_CFP_PERIOD_5211) + +/* + * Next beacon time register + */ +#define AR5K_TIMER0_5210 0x802c +#define AR5K_TIMER0_5211 0x8028 +#define AR5K_TIMER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER0_5210 : AR5K_TIMER0_5211) + +/* + * Next DMA beacon alert register + */ +#define AR5K_TIMER1_5210 0x8030 +#define AR5K_TIMER1_5211 0x802c +#define AR5K_TIMER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER1_5210 : AR5K_TIMER1_5211) + +/* + * Next software beacon alert register + */ +#define AR5K_TIMER2_5210 0x8034 +#define AR5K_TIMER2_5211 0x8030 +#define AR5K_TIMER2 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER2_5210 : AR5K_TIMER2_5211) + +/* + * Next ATIM window time register + */ +#define AR5K_TIMER3_5210 0x8038 +#define AR5K_TIMER3_5211 0x8034 +#define AR5K_TIMER3 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TIMER3_5210 : AR5K_TIMER3_5211) + + +/* + * 5210 First inter frame spacing register (IFS) + */ +#define AR5K_IFS0 0x8040 +#define AR5K_IFS0_SIFS 0x000007ff +#define AR5K_IFS0_SIFS_S 0 +#define AR5K_IFS0_DIFS 0x007ff800 +#define AR5K_IFS0_DIFS_S 11 + +/* + * 5210 Second inter frame spacing register (IFS) + */ +#define AR5K_IFS1 0x8044 +#define AR5K_IFS1_PIFS 0x00000fff +#define AR5K_IFS1_PIFS_S 0 +#define AR5K_IFS1_EIFS 0x03fff000 +#define AR5K_IFS1_EIFS_S 12 +#define AR5K_IFS1_CS_EN 0x04000000 + + +/* + * CFP duration register + */ +#define AR5K_CFP_DUR_5210 0x8048 +#define AR5K_CFP_DUR_5211 0x8038 +#define AR5K_CFP_DUR (ah->ah_version == AR5K_AR5210 ? \ + AR5K_CFP_DUR_5210 : AR5K_CFP_DUR_5211) + +/* + * Receive filter register + */ +#define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ +#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ +#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211) +#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */ +#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */ +#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */ +#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */ +#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */ +#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */ +#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */ +#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */ +#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */ +#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */ +#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */ +#define AR5K_RX_FILTER_PHYERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_PHYERR_5211 : AR5K_RX_FILTER_PHYERR_5212)) +#define AR5K_RX_FILTER_RADARERR \ + ((ah->ah_version == AR5K_AR5211 ? \ + AR5K_RX_FILTER_RADARERR_5211 : AR5K_RX_FILTER_RADARERR_5212)) + +/* + * Multicast filter register (lower 32 bits) + */ +#define AR5K_MCAST_FILTER0_5210 0x8050 +#define AR5K_MCAST_FILTER0_5211 0x8040 +#define AR5K_MCAST_FILTER0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER0_5210 : AR5K_MCAST_FILTER0_5211) + +/* + * Multicast filter register (higher 16 bits) + */ +#define AR5K_MCAST_FILTER1_5210 0x8054 +#define AR5K_MCAST_FILTER1_5211 0x8044 +#define AR5K_MCAST_FILTER1 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_MCAST_FILTER1_5210 : AR5K_MCAST_FILTER1_5211) + + +/* + * Transmit mask register (lower 32 bits) [5210] + */ +#define AR5K_TX_MASK0 0x8058 + +/* + * Transmit mask register (higher 16 bits) [5210] + */ +#define AR5K_TX_MASK1 0x805c + +/* + * Clear transmit mask [5210] + */ +#define AR5K_CLR_TMASK 0x8060 + +/* + * Trigger level register (before transmission) [5210] + */ +#define AR5K_TRIG_LVL 0x8064 + + +/* + * PCU control register + * + * Only DIS_RX is used in the code, the rest i guess are + * for tweaking/diagnostics. + */ +#define AR5K_DIAG_SW_5210 0x8068 /* Register Address [5210] */ +#define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ +#define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) +#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ +#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ +#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ +#define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ +#define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ +#define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 +#define AR5K_DIAG_SW_DIS_RX (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_DIS_RX_5210 : AR5K_DIAG_SW_DIS_RX_5211) +#define AR5K_DIAG_SW_LOOP_BACK_5210 0x00000080 /* Loopback (i guess it goes with DIS_TX) [5210] */ +#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040 +#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211) +#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */ +#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080 +#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211) +#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */ +#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 +#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 +#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) +#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ +#define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ +#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ +#define AR5K_DIAG_SW_SCRAM_SEED_S 10 +#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ +#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 +#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */ +#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) +#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */ +#define AR5K_DIAG_SW_OBSPT_S 18 +#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */ +#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */ +#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */ +#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */ + +/* + * TSF (clock) register (lower 32 bits) + */ +#define AR5K_TSF_L32_5210 0x806c +#define AR5K_TSF_L32_5211 0x804c +#define AR5K_TSF_L32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211) + +/* + * TSF (clock) register (higher 32 bits) + */ +#define AR5K_TSF_U32_5210 0x8070 +#define AR5K_TSF_U32_5211 0x8050 +#define AR5K_TSF_U32 (ah->ah_version == AR5K_AR5210 ? \ + AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211) + +/* + * Last beacon timestamp register (Read Only) + */ +#define AR5K_LAST_TSTP 0x8080 + +/* + * ADDAC test register [5211+] + */ +#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ +#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ +#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ +#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ +#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ +#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ +#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ +#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ +#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ +#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* ARM rx buffer for capture */ + +/* + * Default antenna register [5211+] + */ +#define AR5K_DEFAULT_ANTENNA 0x8058 + +/* + * Frame control QoS mask register (?) [5211+] + * (FC_QOS_MASK) + */ +#define AR5K_FRAME_CTL_QOSM 0x805c + +/* + * Seq mask register (?) [5211+] + */ +#define AR5K_SEQ_MASK 0x8060 + +/* + * Retry count register [5210] + */ +#define AR5K_RETRY_CNT 0x8084 /* Register Address [5210] */ +#define AR5K_RETRY_CNT_SSH 0x0000003f /* Station short retry count (?) */ +#define AR5K_RETRY_CNT_SLG 0x00000fc0 /* Station long retry count (?) */ + +/* + * Back-off status register [5210] + */ +#define AR5K_BACKOFF 0x8088 /* Register Address [5210] */ +#define AR5K_BACKOFF_CW 0x000003ff /* Backoff Contention Window (?) */ +#define AR5K_BACKOFF_CNT 0x03ff0000 /* Backoff count (?) */ + + + +/* + * NAV register (current) + */ +#define AR5K_NAV_5210 0x808c +#define AR5K_NAV_5211 0x8084 +#define AR5K_NAV (ah->ah_version == AR5K_AR5210 ? \ + AR5K_NAV_5210 : AR5K_NAV_5211) + +/* + * RTS success register + */ +#define AR5K_RTS_OK_5210 0x8090 +#define AR5K_RTS_OK_5211 0x8088 +#define AR5K_RTS_OK (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_OK_5210 : AR5K_RTS_OK_5211) + +/* + * RTS failure register + */ +#define AR5K_RTS_FAIL_5210 0x8094 +#define AR5K_RTS_FAIL_5211 0x808c +#define AR5K_RTS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_RTS_FAIL_5210 : AR5K_RTS_FAIL_5211) + +/* + * ACK failure register + */ +#define AR5K_ACK_FAIL_5210 0x8098 +#define AR5K_ACK_FAIL_5211 0x8090 +#define AR5K_ACK_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_ACK_FAIL_5210 : AR5K_ACK_FAIL_5211) + +/* + * FCS failure register + */ +#define AR5K_FCS_FAIL_5210 0x809c +#define AR5K_FCS_FAIL_5211 0x8094 +#define AR5K_FCS_FAIL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_FCS_FAIL_5210 : AR5K_FCS_FAIL_5211) + +/* + * Beacon count register + */ +#define AR5K_BEACON_CNT_5210 0x80a0 +#define AR5K_BEACON_CNT_5211 0x8098 +#define AR5K_BEACON_CNT (ah->ah_version == AR5K_AR5210 ? \ + AR5K_BEACON_CNT_5210 : AR5K_BEACON_CNT_5211) + + +/*===5212 Specific PCU registers===*/ + +/* + * Transmit power control register + */ +#define AR5K_TPC 0x80e8 +#define AR5K_TPC_ACK 0x0000003f /* ack frames */ +#define AR5K_TPC_ACK_S 0 +#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ +#define AR5K_TPC_CTS_S 8 +#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ +#define AR5K_TPC_CHIRP_S 16 +#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ +#define AR5K_TPC_DOPPLER_S 24 + +/* + * XR (eXtended Range) mode register + */ +#define AR5K_XRMODE 0x80c0 /* Register Address */ +#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ +#define AR5K_XRMODE_POLL_TYPE_S 0 +#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ +#define AR5K_XRMODE_POLL_SUBTYPE_S 2 +#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ +#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ +#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ +#define AR5K_XRMODE_FRAME_HOLD_S 20 + +/* + * XR delay register + */ +#define AR5K_XRDELAY 0x80c4 /* Register Address */ +#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ +#define AR5K_XRDELAY_SLOT_DELAY_S 0 +#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ +#define AR5K_XRDELAY_CHIRP_DELAY_S 16 + +/* + * XR timeout register + */ +#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ +#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ +#define AR5K_XRTIMEOUT_CHIRP_S 0 +#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ +#define AR5K_XRTIMEOUT_POLL_S 16 + +/* + * XR chirp register + */ +#define AR5K_XRCHIRP 0x80cc /* Register Address */ +#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ +#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ + +/* + * XR stomp register + */ +#define AR5K_XRSTOMP 0x80d0 /* Register Address */ +#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ +#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ +#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ +#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ +#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ +#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ + +/* + * First enhanced sleep register + */ +#define AR5K_SLEEP0 0x80d4 /* Register Address */ +#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ +#define AR5K_SLEEP0_NEXT_DTIM_S 0 +#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ +#define AR5K_SLEEP0_CABTO_S 24 + +/* + * Second enhanced sleep register + */ +#define AR5K_SLEEP1 0x80d8 /* Register Address */ +#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ +#define AR5K_SLEEP1_NEXT_TIM_S 0 +#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ +#define AR5K_SLEEP1_BEACON_TO_S 24 + +/* + * Third enhanced sleep register + */ +#define AR5K_SLEEP2 0x80dc /* Register Address */ +#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ +#define AR5K_SLEEP2_TIM_PER_S 0 +#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ +#define AR5K_SLEEP2_DTIM_PER_S 16 + +/* + * BSSID mask registers + */ +#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */ +#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */ + +/* + * TX power control (TPC) register + * + * XXX: PCDAC steps (0.5dbm) or DBM ? + * + */ +#define AR5K_TXPC 0x80e8 /* Register Address */ +#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */ +#define AR5K_TXPC_ACK_S 0 +#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */ +#define AR5K_TXPC_CTS_S 8 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */ +#define AR5K_TXPC_CHIRP_S 16 +#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */ +#define AR5K_TXPC_DOPPLER_S 24 + +/* + * Profile count registers + */ +#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ +#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ +#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ +#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ + +/* + * Quiet period control registers + */ +#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */ +#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0 +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */ +#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */ + +#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */ +#define AR5K_QUIET_CTL2_QT_PER_S 0 +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */ +#define AR5K_QUIET_CTL2_QT_DUR_S 16 + +/* + * TSF parameter register + */ +#define AR5K_TSF_PARM 0x8104 /* Register Address */ +#define AR5K_TSF_PARM_INC 0x000000ff /* Mask for TSF increment */ +#define AR5K_TSF_PARM_INC_S 0 + +/* + * QoS NOACK policy + */ +#define AR5K_QOS_NOACK 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */ +#define AR5K_QOS_NOACK_2BIT_VALUES_S 0 +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */ +#define AR5K_QOS_NOACK_BIT_OFFSET_S 4 +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */ +#define AR5K_QOS_NOACK_BYTE_OFFSET_S 7 + +/* + * PHY error filter register + */ +#define AR5K_PHY_ERR_FIL 0x810c +#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ +#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ +#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ + +/* + * XR latency register + */ +#define AR5K_XRLAT_TX 0x8110 + +/* + * ACK SIFS register + */ +#define AR5K_ACKSIFS 0x8114 /* Register Address */ +#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ + +/* + * MIC QoS control register (?) + */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2)) +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ + +/* + * MIC QoS select register (?) + */ +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4)) + +/* + * Misc mode control register (?) + */ +#define AR5K_MISC_MODE 0x8120 /* Register Address */ +#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ +#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ +#define AR5K_MISC_MODE_COMBINED_MIC 0x00000004 /* use rx/tx MIC key */ +/* more bits */ + +/* + * OFDM Filter counter + */ +#define AR5K_OFDM_FIL_CNT 0x8124 + +/* + * CCK Filter counter + */ +#define AR5K_CCK_FIL_CNT 0x8128 + +/* + * PHY Error Counters (?) + */ +#define AR5K_PHYERR_CNT1 0x812c +#define AR5K_PHYERR_CNT1_MASK 0x8130 + +#define AR5K_PHYERR_CNT2 0x8134 +#define AR5K_PHYERR_CNT2_MASK 0x8138 + +/* + * TSF Threshold register (?) + */ +#define AR5K_TSF_THRES 0x813c + +/* + * TODO: Wake On Wireless registers + * Range: 0x8147 - 0x818c + */ + +/* + * Rate -> ACK SIFS mapping table (32 entries) + */ +#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ +#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) +#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ +#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ + +/* + * Rate -> duration mapping table (32 entries) + */ +#define AR5K_RATE_DUR_BASE 0x8700 +#define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) + +/* + * Rate -> db mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_RATE2DB_BASE 0x87c0 +#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) + +/* + * db -> Rate mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_DB2RATE_BASE 0x87e0 +#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) + +/*===5212 end===*/ + +/* + * Key table (WEP) register + */ +#define AR5K_KEYTABLE_0_5210 0x9000 +#define AR5K_KEYTABLE_0_5211 0x8800 +#define AR5K_KEYTABLE_5210(_n) (AR5K_KEYTABLE_0_5210 + ((_n) << 5)) +#define AR5K_KEYTABLE_5211(_n) (AR5K_KEYTABLE_0_5211 + ((_n) << 5)) +#define AR5K_KEYTABLE(_n) (ah->ah_version == AR5K_AR5210 ? \ + AR5K_KEYTABLE_5210(_n) : AR5K_KEYTABLE_5211(_n)) +#define AR5K_KEYTABLE_OFF(_n, x) (AR5K_KEYTABLE(_n) + (x << 2)) +#define AR5K_KEYTABLE_TYPE(_n) AR5K_KEYTABLE_OFF(_n, 5) +#define AR5K_KEYTABLE_TYPE_40 0x00000000 +#define AR5K_KEYTABLE_TYPE_104 0x00000001 +#define AR5K_KEYTABLE_TYPE_128 0x00000003 +#define AR5K_KEYTABLE_TYPE_TKIP 0x00000004 /* [5212+] */ +#define AR5K_KEYTABLE_TYPE_AES 0x00000005 /* [5211+] */ +#define AR5K_KEYTABLE_TYPE_CCM 0x00000006 /* [5212+] */ +#define AR5K_KEYTABLE_TYPE_NULL 0x00000007 /* [5211+] */ +#define AR5K_KEYTABLE_ANTENNA 0x00000008 /* [5212+] */ +#define AR5K_KEYTABLE_MAC0(_n) AR5K_KEYTABLE_OFF(_n, 6) +#define AR5K_KEYTABLE_MAC1(_n) AR5K_KEYTABLE_OFF(_n, 7) +#define AR5K_KEYTABLE_VALID 0x00008000 + +/* If key type is TKIP and MIC is enabled + * MIC key goes in offset entry + 64 */ +#define AR5K_KEYTABLE_MIC_OFFSET 64 + +/* WEP 40-bit = 40-bit entered key + 24 bit IV = 64-bit + * WEP 104-bit = 104-bit entered key + 24-bit IV = 128-bit + * WEP 128-bit = 128-bit entered key + 24 bit IV = 152-bit + * + * Some vendors have introduced bigger WEP keys to address + * security vulnerabilities in WEP. This includes: + * + * WEP 232-bit = 232-bit entered key + 24 bit IV = 256-bit + * + * We can expand this if we find ar5k Atheros cards with a larger + * key table size. + */ +#define AR5K_KEYTABLE_SIZE_5210 64 +#define AR5K_KEYTABLE_SIZE_5211 128 +#define AR5K_KEYTABLE_SIZE (ah->ah_version == AR5K_AR5210 ? \ + AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211) + + +/*===PHY REGISTERS===*/ + +/* + * PHY registers start + */ +#define AR5K_PHY_BASE 0x9800 +#define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) + +/* + * TST_2 (Misc config parameters) + */ +#define AR5K_PHY_TST2 0x9800 /* Register Address */ +#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/ +#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */ +#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ +#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ +#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ +#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch ?) */ +#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ +#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ +#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ +#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ +#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ +#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ +#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ +#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ +#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ +#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ + +/* + * PHY frame control register [5110] /turbo mode register [5111+] + * + * There is another frame control register for [5111+] + * at address 0x9944 (see below) but the 2 first flags + * are common here between 5110 frame control register + * and [5111+] turbo mode register, so this also works as + * a "turbo mode register" for 5110. We treat this one as + * a frame control register for 5110 below. + */ +#define AR5K_PHY_TURBO 0x9804 /* Register Address */ +#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */ +#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */ + +/* + * PHY agility command register + * (aka TST_1) + */ +#define AR5K_PHY_AGC 0x9808 /* Register Address */ +#define AR5K_PHY_TST1 0x9808 +#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ +#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */ +#define AR5K_PHY_TST1_TXSRC_SRC_S 1 +#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */ +#define AR5K_PHY_TST1_TXSRC_ALT_S 7 + + +/* + * PHY timing register 3 [5112+] + */ +#define AR5K_PHY_TIMING_3 0x9814 +#define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 +#define AR5K_PHY_TIMING_3_DSC_MAN_S 17 +#define AR5K_PHY_TIMING_3_DSC_EXP 0x0001e000 +#define AR5K_PHY_TIMING_3_DSC_EXP_S 13 + +/* + * PHY chip revision register + */ +#define AR5K_PHY_CHIP_ID 0x9818 + +/* + * PHY activation register + */ +#define AR5K_PHY_ACT 0x981c /* Register Address */ +#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ +#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ + +/* + * PHY RF control registers + */ +#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0 + +#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000ff00 /* TX end to XLNA on */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 8 + +#define AR5K_PHY_ADC_CTL 0x982c +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0 +#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000 +#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000 +#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000 +#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16 + +#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ + +/* + * Pre-Amplifier control register + * (XPA -> external pre-amplifier) + */ +#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ +#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ +#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ +#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ +#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ + +/* + * PHY settling register + */ +#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */ +#define AR5K_PHY_SETTLING_AGC_S 0 +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */ +#define AR5K_PHY_SETTLING_SWITCH_S 7 + +/* + * PHY Gain registers + */ +#define AR5K_PHY_GAIN 0x9848 /* Register Address */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */ +#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12 +#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000 +#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18 + +#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ +#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ + +/* + * Desired ADC/PGA size register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_ADC_S 0 +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA_S 8 +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT_S 20 + +/* + * PHY signal register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_SIG 0x9858 /* Register Address */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */ +#define AR5K_PHY_SIG_FIRSTEP_S 12 +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */ +#define AR5K_PHY_SIG_FIRPWR_S 18 + +/* + * PHY coarse agility control register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */ +#define AR5K_PHY_AGCCOARSE_LO_S 7 +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */ +#define AR5K_PHY_AGCCOARSE_HI_S 15 + +/* + * PHY agility control register + */ +#define AR5K_PHY_AGCCTL 0x9860 /* Register address */ +#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */ +#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */ +#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */ +#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */ + +/* + * PHY noise floor status register + */ +#define AR5K_PHY_NF 0x9864 /* Register address */ +#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */ +#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */ +#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) +#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) +#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) +#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */ +#define AR5K_PHY_NF_THRESH62_S 12 +#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */ +#define AR5K_PHY_NF_MINCCA_PWR_S 19 + +/* + * PHY ADC saturation register [5110] + */ +#define AR5K_PHY_ADCSAT 0x9868 +#define AR5K_PHY_ADCSAT_ICNT 0x0001f800 +#define AR5K_PHY_ADCSAT_ICNT_S 11 +#define AR5K_PHY_ADCSAT_THR 0x000007e0 +#define AR5K_PHY_ADCSAT_THR_S 5 + +/* + * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] + */ + +/* High thresholds */ +#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 + +/* Low thresholds */ +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 + + +/* + * PHY sleep registers [5112+] + */ +#define AR5K_PHY_SCR 0x9870 + +#define AR5K_PHY_SLMT 0x9874 +#define AR5K_PHY_SLMT_32MHZ 0x0000007f + +#define AR5K_PHY_SCAL 0x9878 +#define AR5K_PHY_SCAL_32MHZ 0x0000000e +#define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a +#define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 + +/* + * PHY PLL (Phase Locked Loop) control register + */ +#define AR5K_PHY_PLL 0x987c +#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */ +/* 40MHz -> 5GHz band */ +#define AR5K_PHY_PLL_40MHZ_5211 0x00000018 +#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa +#define AR5K_PHY_PLL_40MHZ_5413 0x00000004 +#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212) +/* 44MHz -> 2.4GHz band */ +#define AR5K_PHY_PLL_44MHZ_5211 0x00000019 +#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab +#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \ + AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) + +#define AR5K_PHY_PLL_RF5111 0x00000000 +#define AR5K_PHY_PLL_RF5112 0x00000040 +#define AR5K_PHY_PLL_HALF_RATE 0x00000100 +#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 + +/* + * RF Buffer register + * + * It's obvious from the code that 0x989c is the buffer register but + * for the other special registers that we write to after sending each + * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers + * for now. It's interesting that they are also used for some other operations. + */ + +#define AR5K_RF_BUFFER 0x989c +#define AR5K_RF_BUFFER_CONTROL_0 0x98c0 /* Channel on 5110 */ +#define AR5K_RF_BUFFER_CONTROL_1 0x98c4 /* Bank 7 on 5112 */ +#define AR5K_RF_BUFFER_CONTROL_2 0x98cc /* Bank 7 on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_3 0x98d0 /* Bank 2 on 5112 */ + /* Channel set on 5111 */ + /* Used to read radio revision*/ + +#define AR5K_RF_BUFFER_CONTROL_4 0x98d4 /* RF Stage register on 5110 */ + /* Bank 0,1,2,6 on 5111 */ + /* Bank 1 on 5112 */ + /* Used during activation on 5111 */ + +#define AR5K_RF_BUFFER_CONTROL_5 0x98d8 /* Bank 3 on 5111 */ + /* Used during activation on 5111 */ + /* Channel on 5112 */ + /* Bank 6 on 5112 */ + +#define AR5K_RF_BUFFER_CONTROL_6 0x98dc /* Bank 3 on 5112 */ + +/* + * PHY RF stage register [5210] + */ +#define AR5K_PHY_RFSTG 0x98d4 +#define AR5K_PHY_RFSTG_DISABLE 0x00000021 + +/* + * BIN masks (?) + */ +#define AR5K_PHY_BIN_MASK_1 0x9900 +#define AR5K_PHY_BIN_MASK_2 0x9904 +#define AR5K_PHY_BIN_MASK_3 0x9908 + +#define AR5K_PHY_BIN_MASK_CTL 0x990c +#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0 +#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000 +#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24 + +/* + * PHY Antenna control register + */ +#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ +#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ +#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ +#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x000003f0 /* Switch table idle (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE_S 4 + +/* + * PHY receiver delay register [5111+] + */ +#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ +#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ + +/* + * PHY max rx length register (?) [5111] + */ +#define AR5K_PHY_MAX_RX_LEN 0x991c + +/* + * PHY timing register 4 + * I(nphase)/Q(adrature) calibration register [5111+] + */ +#define AR5K_PHY_IQ 0x9920 /* Register Address */ +#define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ +#define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ +#define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 +#define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 +#define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ +#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ +#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ +#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ +#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ +#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ +#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ + +/* + * PHY timing register 5 + * OFDM Self-correlator Cyclic RSSI threshold params + * (Check out bb_cycpwr_thr1 on ANI patent) + */ +#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 1 +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ + +/* + * PHY-only warm reset register + */ +#define AR5K_PHY_WARM_RESET 0x9928 + +/* + * PHY-only control register + */ +#define AR5K_PHY_CTL 0x992c /* Register Address */ +#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ +#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ +#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ +#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ +#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ +#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ +#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ +#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ + +/* + * PHY PAPD probe register [5111+] + */ +#define AR5K_PHY_PAPD_PROBE 0x9930 +#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 +#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 +#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 +#define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 +#define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 +#define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 +#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 +#define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ +#define AR5K_PHY_PAPD_PROBE_TYPE_S 23 +#define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 +#define AR5K_PHY_PAPD_PROBE_TYPE_XR 1 +#define AR5K_PHY_PAPD_PROBE_TYPE_CCK 2 +#define AR5K_PHY_PAPD_PROBE_GAINF 0xfe000000 +#define AR5K_PHY_PAPD_PROBE_GAINF_S 25 +#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */ +#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */ + +/* + * PHY TX rate power registers [5112+] + */ +#define AR5K_PHY_TXPOWER_RATE1 0x9934 +#define AR5K_PHY_TXPOWER_RATE2 0x9938 +#define AR5K_PHY_TXPOWER_RATE_MAX 0x993c +#define AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE 0x00000040 +#define AR5K_PHY_TXPOWER_RATE3 0xa234 +#define AR5K_PHY_TXPOWER_RATE4 0xa238 + +/* + * PHY frame control register [5111+] + */ +#define AR5K_PHY_FRAME_CTL_5210 0x9804 +#define AR5K_PHY_FRAME_CTL_5211 0x9944 +#define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ + AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) +/*---[5111+]---*/ +#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ +#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 +#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ +#define AR5K_PHY_FRAME_CTL_EMU 0x80000000 +#define AR5K_PHY_FRAME_CTL_EMU_S 31 +/*---[5110/5111]---*/ +#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ +#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ +#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ +#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ +#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 +#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ +#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ + AR5K_PHY_FRAME_CTL_TXURN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ + AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \ + AR5K_PHY_FRAME_CTL_PARITY_ERR | \ + AR5K_PHY_FRAME_CTL_TIMING_ERR + +/* + * PHY Tx Power adjustment register [5212A+] + */ +#define AR5K_PHY_TX_PWR_ADJ 0x994c +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA 0x00000fc0 +#define AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA_S 6 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX 0x00fc0000 +#define AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX_S 18 + +/* + * PHY radar detection register [5111+] + */ +#define AR5K_PHY_RADAR 0x9954 +#define AR5K_PHY_RADAR_ENABLE 0x00000001 +#define AR5K_PHY_RADAR_DISABLE 0x00000000 +#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold + 5-bits, units unknown {0..31} + (? MHz ?) */ +#define AR5K_PHY_RADAR_INBANDTHR_S 1 + +#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PRSSI_THR_S 6 + +#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12 + +#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold. + 6-bits, dBm range {0..63} + in dBm units. */ +#define AR5K_PHY_RADAR_RSSI_THR_S 18 + +#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response + filter power out threshold. + 7-bits, standard power range + {0..127} in 1/2 dBm units. */ +#define AR5K_PHY_RADAR_FIRPWR_THRS 24 + +/* + * PHY antenna switch table registers + */ +#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 +#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 + +/* + * PHY Noise floor threshold + */ +#define AR5K_PHY_NFTHRES 0x9968 + +/* + * Sigma Delta register (?) [5213] + */ +#define AR5K_PHY_SIGMA_DELTA 0x996C +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003 +#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0 +#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8 +#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3 +#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00 +#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ffe000 +#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13 + +/* + * RF restart register [5112+] (?) + */ +#define AR5K_PHY_RESTART 0x9970 /* restart */ +#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */ +#define AR5K_PHY_RESTART_DIV_GC_S 18 + +/* + * RF Bus access request register (for synth-oly channel switching) + */ +#define AR5K_PHY_RFBUS_REQ 0x997C +#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001 + +/* + * Spur mitigation masks (?) + */ +#define AR5K_PHY_TIMING_7 0x9980 +#define AR5K_PHY_TIMING_8 0x9984 +#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0 + +#define AR5K_PHY_BIN_MASK2_1 0x9988 +#define AR5K_PHY_BIN_MASK2_2 0x998c +#define AR5K_PHY_BIN_MASK2_3 0x9990 + +#define AR5K_PHY_BIN_MASK2_4 0x9994 +#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff +#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0 + +#define AR5K_PHY_TIMING_9 0x9998 +#define AR5K_PHY_TIMING_10 0x999c +#define AR5K_PHY_TIMING_10_PILOT_MASK_2 0x000fffff +#define AR5K_PHY_TIMING_10_PILOT_MASK_2_S 0 + +/* + * Spur mitigation control + */ +#define AR5K_PHY_TIMING_11 0x99a0 /* Register address */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */ +#define AR5K_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0 +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */ +#define AR5K_PHY_TIMING_11_SPUR_FREQ_SD_S 20 +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */ +#define AR5K_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */ + +/* + * Gain tables + */ +#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ +#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) + +/* + * PHY timing IQ calibration result register [5111+] + */ +#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ +#define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ + +/* + * PHY current RSSI register [5111+] + */ +#define AR5K_PHY_CURRENT_RSSI 0x9c1c + +/* + * PHY RF Bus grant register + */ +#define AR5K_PHY_RFBUS_GRANT 0x9c20 +#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001 + +/* + * PHY ADC test register + */ +#define AR5K_PHY_ADC_TEST 0x9c24 +#define AR5K_PHY_ADC_TEST_I 0x00000001 +#define AR5K_PHY_ADC_TEST_Q 0x00000200 + +/* + * PHY DAC test register + */ +#define AR5K_PHY_DAC_TEST 0x9c28 +#define AR5K_PHY_DAC_TEST_I 0x00000001 +#define AR5K_PHY_DAC_TEST_Q 0x00000200 + +/* + * PHY PTAT register (?) + */ +#define AR5K_PHY_PTAT 0x9c2c + +/* + * PHY Illegal TX rate register [5112+] + */ +#define AR5K_PHY_BAD_TX_RATE 0x9c30 + +/* + * PHY SPUR Power register [5112+] + */ +#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ +#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ +#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ +#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ + +/* + * PHY Channel status register [5112+] (?) + */ +#define AR5K_PHY_CHAN_STATUS 0x9c38 +#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 + +/* + * Heavy clip enable register + */ +#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0 + +/* + * PHY clock sleep registers [5112+] + */ +#define AR5K_PHY_SCLOCK 0x99f0 +#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c +#define AR5K_PHY_SDELAY 0x99f4 +#define AR5K_PHY_SDELAY_32MHZ 0x000000ff +#define AR5K_PHY_SPENDING 0x99f8 + + +/* + * PHY PAPD I (power?) table (?) + * (92! entries) + */ +#define AR5K_PHY_PAPD_I_BASE 0xa000 +#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) + +/* + * PHY PCDAC TX power table + */ +#define AR5K_PHY_PCDAC_TXPOWER_BASE 0xa180 +#define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) + +/* + * PHY mode register [5111+] + */ +#define AR5K_PHY_MODE 0x0a200 /* Register Address */ +#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ +#define AR5K_PHY_MODE_MOD_OFDM 0 +#define AR5K_PHY_MODE_MOD_CCK 1 +#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ +#define AR5K_PHY_MODE_FREQ_5GHZ 0 +#define AR5K_PHY_MODE_FREQ_2GHZ 2 +#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ +#define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ +#define AR5K_PHY_MODE_RAD_RF5111 0 +#define AR5K_PHY_MODE_RAD_RF5112 8 +#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ +#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ +#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ + +/* + * PHY CCK transmit control register [5111+ (?)] + */ +#define AR5K_PHY_CCKTXCTL 0xa204 +#define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 +#define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 +#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 +#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 + +/* + * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] + */ +#define AR5K_PHY_CCK_CROSSCORR 0xa208 +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 + +/* Same address is used for antenna diversity activation */ +#define AR5K_PHY_FAST_ANT_DIV 0xa208 +#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000 + +/* + * PHY 2GHz gain register [5111+] + */ +#define AR5K_PHY_GAIN_2GHZ 0xa20c +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000 +#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18 +#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c + +#define AR5K_PHY_CCK_RX_CTL_4 0xa21c +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000 +#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19 + +#define AR5K_PHY_DAG_CCK_CTL 0xa228 +#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00 +#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10 + +#define AR5K_PHY_FAST_ADC 0xa24c + +#define AR5K_PHY_BLUETOOTH 0xa254 + +/* + * Transmit Power Control register + * [2413+] + */ +#define AR5K_PHY_TPC_RG1 0xa258 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 +#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 +#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 +#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 +#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 +#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 +#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 +#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 + +#define AR5K_PHY_TPC_RG5 0xa26C +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F +#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000 +#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22 + +/* + * PHY PDADC Tx power table + */ +#define AR5K_PHY_PDADC_TXPOWER_BASE 0xa280 +#define AR5K_PHY_PDADC_TXPOWER(_n) (AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2)) diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfbuffer.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfbuffer.h new file mode 100644 index 000000000..e50baff66 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfbuffer.h @@ -0,0 +1,1181 @@ +/* + * RF Buffer handling functions + * + * Copyright (c) 2009 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + + +/* + * There are some special registers on the RF chip + * that control various operation settings related mostly to + * the analog parts (channel, gain adjustment etc). + * + * We don't write on those registers directly but + * we send a data packet on the chip, using a special register, + * that holds all the settings we need. After we 've sent the + * data packet, we write on another special register to notify hw + * to apply the settings. This is done so that control registers + * can be dynamicaly programmed during operation and the settings + * are applied faster on the hw. + * + * We call each data packet an "RF Bank" and all the data we write + * (all RF Banks) "RF Buffer". This file holds initial RF Buffer + * data for the different RF chips, and various info to match RF + * Buffer offsets with specific RF registers so that we can access + * them. We tweak these settings on rfregs_init function. + * + * Also check out reg.h and U.S. Patent 6677779 B1 (about buffer + * registers and control registers): + * + * http://www.google.com/patents?id=qNURAAAAEBAJ + */ + + +/* + * Struct to hold default mode specific RF + * register values (RF Banks) + */ +struct ath5k_ini_rfbuffer { + u8 rfb_bank; /* RF Bank number */ + u16 rfb_ctrl_register; /* RF Buffer control register */ + u32 rfb_mode_data[5]; /* RF Buffer data for each mode */ +}; + +/* + * Struct to hold RF Buffer field + * infos used to access certain RF + * analog registers + */ +struct ath5k_rfb_field { + u8 len; /* Field length */ + u16 pos; /* Offset on the raw packet */ + u8 col; /* Column -used for shifting */ +}; + +/* + * RF analog register definition + */ +struct ath5k_rf_reg { + u8 bank; /* RF Buffer Bank number */ + u8 index; /* Register's index on rf_regs_idx */ + struct ath5k_rfb_field field; /* RF Buffer field for this register */ +}; + +/* Map RF registers to indexes + * We do this to handle common bits and make our + * life easier by using an index for each register + * instead of a full rfb_field */ +enum ath5k_rf_regs_idx { + /* BANK 6 */ + AR5K_RF_OB_2GHZ = 0, + AR5K_RF_OB_5GHZ, + AR5K_RF_DB_2GHZ, + AR5K_RF_DB_5GHZ, + AR5K_RF_FIXED_BIAS_A, + AR5K_RF_FIXED_BIAS_B, + AR5K_RF_PWD_XPD, + AR5K_RF_XPD_SEL, + AR5K_RF_XPD_GAIN, + AR5K_RF_PD_GAIN_LO, + AR5K_RF_PD_GAIN_HI, + AR5K_RF_HIGH_VC_CP, + AR5K_RF_MID_VC_CP, + AR5K_RF_LOW_VC_CP, + AR5K_RF_PUSH_UP, + AR5K_RF_PAD2GND, + AR5K_RF_XB2_LVL, + AR5K_RF_XB5_LVL, + AR5K_RF_PWD_ICLOBUF_2G, + AR5K_RF_PWD_84, + AR5K_RF_PWD_90, + AR5K_RF_PWD_130, + AR5K_RF_PWD_131, + AR5K_RF_PWD_132, + AR5K_RF_PWD_136, + AR5K_RF_PWD_137, + AR5K_RF_PWD_138, + AR5K_RF_PWD_166, + AR5K_RF_PWD_167, + AR5K_RF_DERBY_CHAN_SEL_MODE, + /* BANK 7 */ + AR5K_RF_GAIN_I, + AR5K_RF_PLO_SEL, + AR5K_RF_RFGAIN_SEL, + AR5K_RF_RFGAIN_STEP, + AR5K_RF_WAIT_S, + AR5K_RF_WAIT_I, + AR5K_RF_MAX_TIME, + AR5K_RF_MIXVGA_OVR, + AR5K_RF_MIXGAIN_OVR, + AR5K_RF_MIXGAIN_STEP, + AR5K_RF_PD_DELAY_A, + AR5K_RF_PD_DELAY_B, + AR5K_RF_PD_DELAY_XR, + AR5K_RF_PD_PERIOD_A, + AR5K_RF_PD_PERIOD_B, + AR5K_RF_PD_PERIOD_XR, +}; + + +/*******************\ +* RF5111 (Sombrero) * +\*******************/ + +/* BANK 6 len pos col */ +#define AR5K_RF5111_OB_2GHZ { 3, 119, 0 } +#define AR5K_RF5111_DB_2GHZ { 3, 122, 0 } + +#define AR5K_RF5111_OB_5GHZ { 3, 104, 0 } +#define AR5K_RF5111_DB_5GHZ { 3, 107, 0 } + +#define AR5K_RF5111_PWD_XPD { 1, 95, 0 } +#define AR5K_RF5111_XPD_GAIN { 4, 96, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5111_PWD(_n) { 1, (135 - _n), 3 } + +/* BANK 7 len pos col */ +#define AR5K_RF5111_GAIN_I { 6, 29, 0 } +#define AR5K_RF5111_PLO_SEL { 1, 4, 0 } +#define AR5K_RF5111_RFGAIN_SEL { 1, 36, 0 } +#define AR5K_RF5111_RFGAIN_STEP { 6, 37, 0 } +/* Only on AR5212 BaseBand and up */ +#define AR5K_RF5111_WAIT_S { 5, 19, 0 } +#define AR5K_RF5111_WAIT_I { 5, 24, 0 } +#define AR5K_RF5111_MAX_TIME { 2, 49, 0 } + +static const struct ath5k_rf_reg rf_regs_5111[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF5111_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5111_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5111_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5111_DB_5GHZ}, + {6, AR5K_RF_PWD_XPD, AR5K_RF5111_PWD_XPD}, + {6, AR5K_RF_XPD_GAIN, AR5K_RF5111_XPD_GAIN}, + {6, AR5K_RF_PWD_84, AR5K_RF5111_PWD(84)}, + {6, AR5K_RF_PWD_90, AR5K_RF5111_PWD(90)}, + {7, AR5K_RF_GAIN_I, AR5K_RF5111_GAIN_I}, + {7, AR5K_RF_PLO_SEL, AR5K_RF5111_PLO_SEL}, + {7, AR5K_RF_RFGAIN_SEL, AR5K_RF5111_RFGAIN_SEL}, + {7, AR5K_RF_RFGAIN_STEP, AR5K_RF5111_RFGAIN_STEP}, + {7, AR5K_RF_WAIT_S, AR5K_RF5111_WAIT_S}, + {7, AR5K_RF_WAIT_I, AR5K_RF5111_WAIT_I}, + {7, AR5K_RF_MAX_TIME, AR5K_RF5111_MAX_TIME} +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5111[] = { + { 0, 0x989c, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 0, 0x989c, + { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } }, + { 0, 0x989c, + { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } }, + { 0, 0x98d4, + { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } }, + { 1, 0x98d4, + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d4, + { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } }, + { 3, 0x98d8, + { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, + { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } }, + { 6, 0x989c, + { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } }, + { 6, 0x989c, + { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } }, + { 6, 0x989c, + { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } }, + { 6, 0x989c, + { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } }, + { 6, 0x98d4, + { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } }, + { 7, 0x989c, + { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } }, + { 7, 0x989c, + { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, + { 7, 0x989c, + { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, + { 7, 0x989c, + { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } }, + { 7, 0x989c, + { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } }, + { 7, 0x989c, + { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } }, + { 7, 0x989c, + { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } }, +}; + + + +/***********************\ +* RF5112/RF2112 (Derby) * +\***********************/ + +/* BANK 7 (Common) len pos col */ +#define AR5K_RF5112X_GAIN_I { 6, 14, 0 } +#define AR5K_RF5112X_MIXVGA_OVR { 1, 36, 0 } +#define AR5K_RF5112X_MIXGAIN_OVR { 2, 37, 0 } +#define AR5K_RF5112X_MIXGAIN_STEP { 4, 32, 0 } +#define AR5K_RF5112X_PD_DELAY_A { 4, 58, 0 } +#define AR5K_RF5112X_PD_DELAY_B { 4, 62, 0 } +#define AR5K_RF5112X_PD_DELAY_XR { 4, 66, 0 } +#define AR5K_RF5112X_PD_PERIOD_A { 4, 70, 0 } +#define AR5K_RF5112X_PD_PERIOD_B { 4, 74, 0 } +#define AR5K_RF5112X_PD_PERIOD_XR { 4, 78, 0 } + +/* RFX112 (Derby 1) */ + +/* BANK 6 len pos col */ +#define AR5K_RF5112_OB_2GHZ { 3, 269, 0 } +#define AR5K_RF5112_DB_2GHZ { 3, 272, 0 } + +#define AR5K_RF5112_OB_5GHZ { 3, 261, 0 } +#define AR5K_RF5112_DB_5GHZ { 3, 264, 0 } + +#define AR5K_RF5112_FIXED_BIAS_A { 1, 260, 0 } +#define AR5K_RF5112_FIXED_BIAS_B { 1, 259, 0 } + +#define AR5K_RF5112_XPD_SEL { 1, 284, 0 } +#define AR5K_RF5112_XPD_GAIN { 2, 252, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5112_PWD(_n) { 1, (302 - _n), 3 } + +static const struct ath5k_rf_reg rf_regs_5112[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF5112_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5112_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5112_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5112_DB_5GHZ}, + {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112_FIXED_BIAS_A}, + {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112_FIXED_BIAS_B}, + {6, AR5K_RF_XPD_SEL, AR5K_RF5112_XPD_SEL}, + {6, AR5K_RF_XPD_GAIN, AR5K_RF5112_XPD_GAIN}, + {6, AR5K_RF_PWD_130, AR5K_RF5112_PWD(130)}, + {6, AR5K_RF_PWD_131, AR5K_RF5112_PWD(131)}, + {6, AR5K_RF_PWD_132, AR5K_RF5112_PWD(132)}, + {6, AR5K_RF_PWD_136, AR5K_RF5112_PWD(136)}, + {6, AR5K_RF_PWD_137, AR5K_RF5112_PWD(137)}, + {6, AR5K_RF_PWD_138, AR5K_RF5112_PWD(138)}, + {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I}, + {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR}, + {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR}, + {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP}, + {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A}, + {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B}, + {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR}, + {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A}, + {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B}, + {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5112[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, + { 3, 0x98dc, + { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, + { 6, 0x989c, + { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } }, + { 6, 0x989c, + { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } }, + { 6, 0x989c, + { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } }, + { 6, 0x989c, + { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } }, + { 6, 0x989c, + { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, + { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } }, + { 6, 0x989c, + { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } }, + { 6, 0x989c, + { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, + { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } }, + { 6, 0x989c, + { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } }, + { 6, 0x989c, + { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, + { 6, 0x989c, + { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } }, + { 6, 0x989c, + { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } }, + { 6, 0x989c, + { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } }, + { 6, 0x989c, + { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } }, + { 6, 0x989c, + { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } }, + { 6, 0x989c, + { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } }, + { 6, 0x989c, + { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } }, + { 6, 0x989c, + { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } }, + { 6, 0x989c, + { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } }, + { 6, 0x989c, + { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } }, + { 6, 0x98d0, + { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } }, + { 7, 0x989c, + { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, + { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, + { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, + { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, + { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } }, + { 7, 0x989c, + { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, + { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, + { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } }, + { 7, 0x989c, + { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } }, + { 7, 0x989c, + { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, + { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, + { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, +}; + +/* RFX112A (Derby 2) */ + +/* BANK 6 len pos col */ +#define AR5K_RF5112A_OB_2GHZ { 3, 287, 0 } +#define AR5K_RF5112A_DB_2GHZ { 3, 290, 0 } + +#define AR5K_RF5112A_OB_5GHZ { 3, 279, 0 } +#define AR5K_RF5112A_DB_5GHZ { 3, 282, 0 } + +#define AR5K_RF5112A_FIXED_BIAS_A { 1, 278, 0 } +#define AR5K_RF5112A_FIXED_BIAS_B { 1, 277, 0 } + +#define AR5K_RF5112A_XPD_SEL { 1, 302, 0 } +#define AR5K_RF5112A_PDGAINLO { 2, 270, 0 } +#define AR5K_RF5112A_PDGAINHI { 2, 257, 0 } + +/* Access to PWD registers */ +#define AR5K_RF5112A_PWD(_n) { 1, (306 - _n), 3 } + +/* Voltage regulators */ +#define AR5K_RF5112A_HIGH_VC_CP { 2, 90, 2 } +#define AR5K_RF5112A_MID_VC_CP { 2, 92, 2 } +#define AR5K_RF5112A_LOW_VC_CP { 2, 94, 2 } +#define AR5K_RF5112A_PUSH_UP { 1, 254, 2 } + +/* Power consumption */ +#define AR5K_RF5112A_PAD2GND { 1, 281, 1 } +#define AR5K_RF5112A_XB2_LVL { 2, 1, 3 } +#define AR5K_RF5112A_XB5_LVL { 2, 3, 3 } + +static const struct ath5k_rf_reg rf_regs_5112a[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF5112A_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5112A_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5112A_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5112A_DB_5GHZ}, + {6, AR5K_RF_FIXED_BIAS_A, AR5K_RF5112A_FIXED_BIAS_A}, + {6, AR5K_RF_FIXED_BIAS_B, AR5K_RF5112A_FIXED_BIAS_B}, + {6, AR5K_RF_XPD_SEL, AR5K_RF5112A_XPD_SEL}, + {6, AR5K_RF_PD_GAIN_LO, AR5K_RF5112A_PDGAINLO}, + {6, AR5K_RF_PD_GAIN_HI, AR5K_RF5112A_PDGAINHI}, + {6, AR5K_RF_PWD_130, AR5K_RF5112A_PWD(130)}, + {6, AR5K_RF_PWD_131, AR5K_RF5112A_PWD(131)}, + {6, AR5K_RF_PWD_132, AR5K_RF5112A_PWD(132)}, + {6, AR5K_RF_PWD_136, AR5K_RF5112A_PWD(136)}, + {6, AR5K_RF_PWD_137, AR5K_RF5112A_PWD(137)}, + {6, AR5K_RF_PWD_138, AR5K_RF5112A_PWD(138)}, + {6, AR5K_RF_PWD_166, AR5K_RF5112A_PWD(166)}, + {6, AR5K_RF_PWD_167, AR5K_RF5112A_PWD(167)}, + {6, AR5K_RF_HIGH_VC_CP, AR5K_RF5112A_HIGH_VC_CP}, + {6, AR5K_RF_MID_VC_CP, AR5K_RF5112A_MID_VC_CP}, + {6, AR5K_RF_LOW_VC_CP, AR5K_RF5112A_LOW_VC_CP}, + {6, AR5K_RF_PUSH_UP, AR5K_RF5112A_PUSH_UP}, + {6, AR5K_RF_PAD2GND, AR5K_RF5112A_PAD2GND}, + {6, AR5K_RF_XB2_LVL, AR5K_RF5112A_XB2_LVL}, + {6, AR5K_RF_XB5_LVL, AR5K_RF5112A_XB5_LVL}, + {7, AR5K_RF_GAIN_I, AR5K_RF5112X_GAIN_I}, + {7, AR5K_RF_MIXVGA_OVR, AR5K_RF5112X_MIXVGA_OVR}, + {7, AR5K_RF_MIXGAIN_OVR, AR5K_RF5112X_MIXGAIN_OVR}, + {7, AR5K_RF_MIXGAIN_STEP, AR5K_RF5112X_MIXGAIN_STEP}, + {7, AR5K_RF_PD_DELAY_A, AR5K_RF5112X_PD_DELAY_A}, + {7, AR5K_RF_PD_DELAY_B, AR5K_RF5112X_PD_DELAY_B}, + {7, AR5K_RF_PD_DELAY_XR, AR5K_RF5112X_PD_DELAY_XR}, + {7, AR5K_RF_PD_PERIOD_A, AR5K_RF5112X_PD_PERIOD_A}, + {7, AR5K_RF_PD_PERIOD_B, AR5K_RF5112X_PD_PERIOD_B}, + {7, AR5K_RF_PD_PERIOD_XR, AR5K_RF5112X_PD_PERIOD_XR}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5112a[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } }, + { 6, 0x989c, + { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } }, + { 6, 0x989c, + { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } }, + { 6, 0x989c, + { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } }, + { 6, 0x989c, + { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } }, + { 6, 0x989c, + { 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000 } }, + { 6, 0x989c, + { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } }, + { 6, 0x989c, + { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, + { 6, 0x989c, + { 0x02190000, 0x02190000, 0x02190000, 0x02190000, 0x02190000 } }, + { 6, 0x989c, + { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, + { 6, 0x989c, + { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } }, + { 6, 0x989c, + { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } }, + { 6, 0x989c, + { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, + { 6, 0x989c, + { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } }, + { 6, 0x989c, + { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } }, + { 6, 0x989c, + { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, + { 6, 0x989c, + { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } }, + { 6, 0x989c, + { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } }, + { 6, 0x989c, + { 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080 } }, + { 6, 0x989c, + { 0x00270019, 0x00270019, 0x00270019, 0x00270019, 0x00270019 } }, + { 6, 0x989c, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } }, + { 6, 0x989c, + { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } }, + { 6, 0x989c, + { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } }, + { 6, 0x989c, + { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } }, + { 6, 0x989c, + { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } }, + { 6, 0x98d8, + { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } }, + { 7, 0x989c, + { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, + { 7, 0x989c, + { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, + { 7, 0x989c, + { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } }, + { 7, 0x989c, + { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, + { 7, 0x989c, + { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } }, + { 7, 0x989c, + { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, + { 7, 0x989c, + { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, + { 7, 0x989c, + { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } }, + { 7, 0x989c, + { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } }, + { 7, 0x989c, + { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, + { 7, 0x989c, + { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, + { 7, 0x989c, + { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, + { 7, 0x98c4, + { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, +}; + + + +/******************\ +* RF2413 (Griffin) * +\******************/ + +/* BANK 6 len pos col */ +#define AR5K_RF2413_OB_2GHZ { 3, 168, 0 } +#define AR5K_RF2413_DB_2GHZ { 3, 165, 0 } + +static const struct ath5k_rf_reg rf_regs_2413[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF2413_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2413_DB_2GHZ}, +}; + +/* Default mode specific settings + * XXX: a/aTurbo ??? + */ +static const struct ath5k_ini_rfbuffer rfb_2413[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x03000000, 0x03000000, 0x03000000, 0x03000000, 0x03000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x40400000, 0x40400000, 0x40400000, 0x40400000, 0x40400000 } }, + { 6, 0x989c, + { 0x65050000, 0x65050000, 0x65050000, 0x65050000, 0x65050000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00420000, 0x00420000, 0x00420000, 0x00420000, 0x00420000 } }, + { 6, 0x989c, + { 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000 } }, + { 6, 0x989c, + { 0x00030000, 0x00030000, 0x00030000, 0x00030000, 0x00030000 } }, + { 6, 0x989c, + { 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000 } }, + { 6, 0x989c, + { 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000 } }, + { 6, 0x989c, + { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } }, + { 6, 0x989c, + { 0x04220000, 0x04220000, 0x04220000, 0x04220000, 0x04220000 } }, + { 6, 0x989c, + { 0x00230018, 0x00230018, 0x00230018, 0x00230018, 0x00230018 } }, + { 6, 0x989c, + { 0x00280000, 0x00280000, 0x00280060, 0x00280060, 0x00280060 } }, + { 6, 0x989c, + { 0x005000c0, 0x005000c0, 0x005000c3, 0x005000c3, 0x005000c3 } }, + { 6, 0x989c, + { 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f } }, + { 6, 0x989c, + { 0x00000458, 0x00000458, 0x00000458, 0x00000458, 0x00000458 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000 } }, + { 6, 0x98d8, + { 0x00400230, 0x00400230, 0x00400230, 0x00400230, 0x00400230 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/***************************\ +* RF2315/RF2316 (Cobra SoC) * +\***************************/ + +/* BANK 6 len pos col */ +#define AR5K_RF2316_OB_2GHZ { 3, 178, 0 } +#define AR5K_RF2316_DB_2GHZ { 3, 175, 0 } + +static const struct ath5k_rf_reg rf_regs_2316[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF2316_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2316_DB_2GHZ}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_2316[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000 } }, + { 6, 0x989c, + { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, + { 6, 0x989c, + { 0x02000000, 0x02000000, 0x02000000, 0x02000000, 0x02000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x95150000, 0x95150000, 0x95150000, 0x95150000, 0x95150000 } }, + { 6, 0x989c, + { 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00080000, 0x00080000, 0x00080000, 0x00080000, 0x00080000 } }, + { 6, 0x989c, + { 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000 } }, + { 6, 0x989c, + { 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000 } }, + { 6, 0x989c, + { 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000 } }, + { 6, 0x989c, + { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, + { 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000 } }, + { 6, 0x989c, + { 0x10880000, 0x10880000, 0x10880000, 0x10880000, 0x10880000 } }, + { 6, 0x989c, + { 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060 } }, + { 6, 0x989c, + { 0x00a00000, 0x00a00000, 0x00a00080, 0x00a00080, 0x00a00080 } }, + { 6, 0x989c, + { 0x00400000, 0x00400000, 0x0040000d, 0x0040000d, 0x0040000d } }, + { 6, 0x989c, + { 0x00110400, 0x00110400, 0x00110400, 0x00110400, 0x00110400 } }, + { 6, 0x989c, + { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, + { 6, 0x989c, + { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, + { 6, 0x989c, + { 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00 } }, + { 6, 0x989c, + { 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8 } }, + { 6, 0x98c0, + { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/******************************\ +* RF5413/RF5424 (Eagle/Condor) * +\******************************/ + +/* BANK 6 len pos col */ +#define AR5K_RF5413_OB_2GHZ { 3, 241, 0 } +#define AR5K_RF5413_DB_2GHZ { 3, 238, 0 } + +#define AR5K_RF5413_OB_5GHZ { 3, 247, 0 } +#define AR5K_RF5413_DB_5GHZ { 3, 244, 0 } + +#define AR5K_RF5413_PWD_ICLOBUF2G { 3, 131, 3 } +#define AR5K_RF5413_DERBY_CHAN_SEL_MODE { 1, 291, 2 } + +static const struct ath5k_rf_reg rf_regs_5413[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF5413_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF5413_DB_2GHZ}, + {6, AR5K_RF_OB_5GHZ, AR5K_RF5413_OB_5GHZ}, + {6, AR5K_RF_DB_5GHZ, AR5K_RF5413_DB_5GHZ}, + {6, AR5K_RF_PWD_ICLOBUF_2G, AR5K_RF5413_PWD_ICLOBUF2G}, + {6, AR5K_RF_DERBY_CHAN_SEL_MODE, AR5K_RF5413_DERBY_CHAN_SEL_MODE}, +}; + +/* Default mode specific settings */ +static const struct ath5k_ini_rfbuffer rfb_5413[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, + { 3, 0x98dc, + { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } }, + { 6, 0x989c, + { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } }, + { 6, 0x989c, + { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } }, + { 6, 0x989c, + { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } }, + { 6, 0x989c, + { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, + { 6, 0x989c, + { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, + { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, + { 6, 0x989c, + { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } }, + { 6, 0x989c, + { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } }, + { 6, 0x989c, + { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, + { 6, 0x989c, + { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } }, + { 6, 0x989c, + { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } }, + { 6, 0x989c, + { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } }, + { 6, 0x989c, + { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, + { 6, 0x989c, + { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } }, + { 6, 0x989c, + { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, + { 6, 0x989c, + { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } }, + { 6, 0x989c, + { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } }, + { 6, 0x989c, + { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } }, + { 6, 0x989c, + { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } }, + { 6, 0x989c, + { 0x00510040, 0x00510040, 0x00510040, 0x00510040, 0x00510040 } }, + { 6, 0x989c, + { 0x005000da, 0x005000da, 0x005000da, 0x005000da, 0x005000da } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } }, + { 6, 0x989c, + { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00002c00 } }, + { 6, 0x98c8, + { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + + + +/***************************\ +* RF2425/RF2417 (Swan/Nala) * +* AR2317 (Spider SoC) * +\***************************/ + +/* BANK 6 len pos col */ +#define AR5K_RF2425_OB_2GHZ { 3, 193, 0 } +#define AR5K_RF2425_DB_2GHZ { 3, 190, 0 } + +static const struct ath5k_rf_reg rf_regs_2425[] = { + {6, AR5K_RF_OB_2GHZ, AR5K_RF2425_OB_2GHZ}, + {6, AR5K_RF_DB_2GHZ, AR5K_RF2425_DB_2GHZ}, +}; + +/* Default mode specific settings + * XXX: a/aTurbo ? + */ +static const struct ath5k_ini_rfbuffer rfb_2425[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, + { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, + { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, + { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, + { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, + { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, + { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, + { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, + { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, + { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, + { 6, 0x989c, + { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, + { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, + { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + +/* + * TODO: Handle the few differences with swan during + * bank modification and get rid of this + */ +static const struct ath5k_ini_rfbuffer rfb_2317[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, + { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, + { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, + { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, + { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } }, + { 6, 0x989c, + { 0x00140100, 0x00140100, 0x00140100, 0x00140100, 0x00140100 } }, + { 6, 0x989c, + { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, + { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } }, + { 6, 0x989c, + { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, + { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, + { 6, 0x989c, + { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, + { 0x00009688, 0x00009688, 0x00009688, 0x00009688, 0x00009688 } }, + { 6, 0x98c4, + { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; + +/* + * TODO: Handle the few differences with swan during + * bank modification and get rid of this + * XXX: a/aTurbo ? + */ +static const struct ath5k_ini_rfbuffer rfb_2417[] = { + { 1, 0x98d4, + /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ + { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, + { 2, 0x98d0, + { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } }, + { 3, 0x98dc, + { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, + { 6, 0x989c, + { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } }, + { 6, 0x989c, + { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } }, + { 6, 0x989c, + { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, + { 6, 0x989c, + { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } }, + { 6, 0x989c, + { 0x00e70000, 0x00e70000, 0x80e70000, 0x80e70000, 0x00e70000 } }, + { 6, 0x989c, + { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } }, + { 6, 0x989c, + { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } }, + { 6, 0x989c, + { 0x0007001a, 0x0007001a, 0x0207001a, 0x0207001a, 0x0007001a } }, + { 6, 0x989c, + { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } }, + { 6, 0x989c, + { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } }, + { 6, 0x989c, + { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, + { 6, 0x989c, + { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } }, + { 6, 0x989c, + { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } }, + { 6, 0x98c4, + { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } }, + { 7, 0x989c, + { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, + { 7, 0x989c, + { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, + { 7, 0x98cc, + { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, +}; diff --git a/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfgain.h b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfgain.h new file mode 100644 index 000000000..1354d8c39 --- /dev/null +++ b/qemu/roms/ipxe/src/drivers/net/ath/ath5k/rfgain.h @@ -0,0 +1,516 @@ +/* + * RF Gain optimization + * + * Copyright (c) 2004-2009 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Mode-specific RF Gain table (64bytes) for RF5111/5112 + * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial + * RF Gain values are included in AR5K_AR5210_INI) + */ +struct ath5k_ini_rfgain { + u16 rfg_register; /* RF Gain register address */ + u32 rfg_value[2]; /* [freq (see below)] */ +}; + +/* Initial RF Gain settings for RF5111 */ +static const struct ath5k_ini_rfgain rfgain_5111[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, + { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, + { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, + { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, + { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, + { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, + { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, + { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } }, + { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } }, + { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } }, + { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } }, + { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } }, + { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } }, + { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } }, + { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } }, + { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } }, + { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } }, + { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } }, + { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } }, + { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } }, + { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } }, + { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } }, + { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } }, + { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } }, + { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } }, + { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } }, + { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } }, + { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } }, + { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } }, + { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } }, + { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } }, + { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } }, + { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } }, + { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } }, + { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } }, + { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } }, + { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } }, + { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } }, + { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } }, + { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } }, + { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } }, + { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } }, + { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } }, + { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } }, + { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } }, + { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } }, + { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } }, +}; + +/* Initial RF Gain settings for RF5112 */ +static const struct ath5k_ini_rfgain rfgain_5112[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, + { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, + { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, + { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } }, + { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } }, + { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } }, + { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } }, + { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } }, + { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } }, + { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } }, + { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } }, + { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } }, + { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } }, + { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } }, + { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } }, + { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } }, + { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } }, + { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } }, + { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } }, + { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } }, + { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } }, + { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } }, + { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } }, + { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } }, + { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } }, + { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } }, + { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } }, + { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } }, + { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } }, + { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } }, + { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } }, + { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } }, + { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } }, + { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } }, + { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } }, + { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } }, + { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } }, + { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } }, + { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } }, + { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } }, + { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } }, + { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } }, + { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } }, + { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } }, + { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } }, + { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } }, + { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } }, + { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } }, + { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } }, + { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } }, + { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } }, + { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } }, + { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } }, + { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } }, + { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } }, + { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } }, +}; + +/* Initial RF Gain settings for RF2413 */ +static const struct ath5k_ini_rfgain rfgain_2413[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000168 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x000001a8 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x000001e8 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x00000028 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000068 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x00000190 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x000001d0 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x00000010 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x00000050 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000090 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x00000191 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000001d1 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x00000011 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x00000051 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x00000091 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x00000178 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x000001b8 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x000001f8 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x00000038 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x00000078 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x00000199 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x000001d9 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x00000019 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x00000059 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x00000099 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000d9 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } }, +}; + +/* Initial RF Gain settings for AR2316 */ +static const struct ath5k_ini_rfgain rfgain_2316[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x000000c0 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000000e0 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x000000e0 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000128 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x00000168 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x000001a8 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x000001e8 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000028 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000068 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000000a8 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x000000e8 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x000000e8 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000130 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x00000130 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x00000170 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x000001b0 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x000001f0 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000030 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x00000070 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000000b0 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f0 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f0 } }, +}; + + +/* Initial RF Gain settings for RF5413 */ +static const struct ath5k_ini_rfgain rfgain_5413[] = { + /* 5Ghz 2Ghz */ + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } }, + { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } }, + { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } }, + { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } }, + { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } }, + { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } }, + { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } }, + { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } }, + { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } }, + { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } }, + { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } }, + { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } }, + { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } }, + { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } }, + { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } }, + { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } }, + { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } }, + { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } }, + { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } }, + { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } }, + { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } }, + { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } }, + { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } }, + { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } }, + { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } }, + { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } }, + { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } }, + { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } }, + { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } }, + { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } }, + { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } }, + { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } }, +}; + + +/* Initial RF Gain settings for RF2425 */ +static const struct ath5k_ini_rfgain rfgain_2425[] = { + { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000000, 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000000, 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000000, 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x00000000, 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000000, 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000000, 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000000, 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000000, 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x00000000, 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000000, 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000000, 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x00000000, 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x00000000, 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x00000000, 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000000, 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000000, 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000000, 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x00000000, 0x000001b0 } }, + { AR5K_RF_GAIN(19), { 0x00000000, 0x000001f0 } }, + { AR5K_RF_GAIN(20), { 0x00000000, 0x00000030 } }, + { AR5K_RF_GAIN(21), { 0x00000000, 0x00000070 } }, + { AR5K_RF_GAIN(22), { 0x00000000, 0x00000171 } }, + { AR5K_RF_GAIN(23), { 0x00000000, 0x000001b1 } }, + { AR5K_RF_GAIN(24), { 0x00000000, 0x000001f1 } }, + { AR5K_RF_GAIN(25), { 0x00000000, 0x00000031 } }, + { AR5K_RF_GAIN(26), { 0x00000000, 0x00000071 } }, + { AR5K_RF_GAIN(27), { 0x00000000, 0x000001b8 } }, + { AR5K_RF_GAIN(28), { 0x00000000, 0x000001f8 } }, + { AR5K_RF_GAIN(29), { 0x00000000, 0x00000038 } }, + { AR5K_RF_GAIN(30), { 0x00000000, 0x00000078 } }, + { AR5K_RF_GAIN(31), { 0x00000000, 0x000000b8 } }, + { AR5K_RF_GAIN(32), { 0x00000000, 0x000001b9 } }, + { AR5K_RF_GAIN(33), { 0x00000000, 0x000001f9 } }, + { AR5K_RF_GAIN(34), { 0x00000000, 0x00000039 } }, + { AR5K_RF_GAIN(35), { 0x00000000, 0x00000079 } }, + { AR5K_RF_GAIN(36), { 0x00000000, 0x000000b9 } }, + { AR5K_RF_GAIN(37), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(38), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(39), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x00000000, 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x00000000, 0x000000f9 } }, +}; + +#define AR5K_GAIN_CRN_FIX_BITS_5111 4 +#define AR5K_GAIN_CRN_FIX_BITS_5112 7 +#define AR5K_GAIN_CRN_MAX_FIX_BITS AR5K_GAIN_CRN_FIX_BITS_5112 +#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN 15 +#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN 20 +#define AR5K_GAIN_CCK_PROBE_CORR 5 +#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA 15 +#define AR5K_GAIN_STEP_COUNT 10 + +/* Check if our current measurement is inside our + * current variable attenuation window */ +#define AR5K_GAIN_CHECK_ADJUST(_g) \ + ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high) + +struct ath5k_gain_opt_step { + s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS]; + s8 gos_gain; +}; + +struct ath5k_gain_opt { + u8 go_default; + u8 go_steps_count; + const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; +}; + +/* + * Parameters on gos_param: + * 1) Tx clip PHY register + * 2) PWD 90 RF register + * 3) PWD 84 RF register + * 4) RFGainSel RF register + */ +static const struct ath5k_gain_opt rfgain_opt_5111 = { + 4, + 9, + { + { { 4, 1, 1, 1 }, 6 }, + { { 4, 0, 1, 1 }, 4 }, + { { 3, 1, 1, 1 }, 3 }, + { { 4, 0, 0, 1 }, 1 }, + { { 4, 1, 1, 0 }, 0 }, + { { 4, 0, 1, 0 }, -2 }, + { { 3, 1, 1, 0 }, -3 }, + { { 4, 0, 0, 0 }, -4 }, + { { 2, 1, 1, 0 }, -6 } + } +}; + +/* + * Parameters on gos_param: + * 1) Mixgain ovr RF register + * 2) PWD 138 RF register + * 3) PWD 137 RF register + * 4) PWD 136 RF register + * 5) PWD 132 RF register + * 6) PWD 131 RF register + * 7) PWD 130 RF register + */ +static const struct ath5k_gain_opt rfgain_opt_5112 = { + 1, + 8, + { + { { 3, 0, 0, 0, 0, 0, 0 }, 6 }, + { { 2, 0, 0, 0, 0, 0, 0 }, 0 }, + { { 1, 0, 0, 0, 0, 0, 0 }, -3 }, + { { 0, 0, 0, 0, 0, 0, 0 }, -6 }, + { { 0, 1, 1, 0, 0, 0, 0 }, -8 }, + { { 0, 1, 1, 0, 1, 1, 0 }, -10 }, + { { 0, 1, 0, 1, 1, 1, 0 }, -13 }, + { { 0, 1, 0, 1, 1, 0, 1 }, -16 }, + } +}; + |