Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 190 insertions, 0 deletions

diff --git a/qemu/roms/ipxe/src/config/general.h b/qemu/roms/ipxe/src/config/general.h
new file mode 100644
index 000000000..539203457
--- /dev/null
+++ b/qemu/roms/ipxe/src/config/general.h
@@ -0,0 +1,190 @@
+#ifndef CONFIG_GENERAL_H
+#define CONFIG_GENERAL_H
+
+/** @file
+ *
+ * General configuration
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#include <config/defaults.h>
+
+/*
+ * Branding
+ *
+ * Vendors may use these strings to add their own branding to iPXE.
+ * PRODUCT_NAME is displayed prior to any iPXE branding in startup
+ * messages, and PRODUCT_SHORT_NAME is used where a brief product
+ * label is required (e.g. in BIOS boot selection menus).
+ *
+ * To minimise end-user confusion, it's probably a good idea to either
+ * make PRODUCT_SHORT_NAME a substring of PRODUCT_NAME or leave it as
+ * "iPXE".
+ *
+ */
+#define PRODUCT_NAME ""
+#define PRODUCT_SHORT_NAME "iPXE"
+
+/*
+ * Banner timeout configuration
+ *
+ * This controls the timeout for the "Press Ctrl-B for the iPXE
+ * command line" banner displayed when iPXE starts up.  The value is
+ * specified in tenths of a second for which the banner should appear.
+ * A value of 0 disables the banner.
+ *
+ * ROM_BANNER_TIMEOUT controls the "Press Ctrl-B to configure iPXE"
+ * banner displayed only by ROM builds of iPXE during POST.  This
+ * defaults to being twice the length of BANNER_TIMEOUT, to allow for
+ * BIOSes that switch video modes immediately before calling the
+ * initialisation vector, thus rendering the banner almost invisible
+ * to the user.
+ */
+#define BANNER_TIMEOUT		20
+#define ROM_BANNER_TIMEOUT	( 2 * BANNER_TIMEOUT )
+
+/*
+ * Network protocols
+ *
+ */
+
+#define	NET_PROTO_IPV4		/* IPv4 protocol */
+#undef	NET_PROTO_IPV6		/* IPv6 protocol */
+#undef	NET_PROTO_FCOE		/* Fibre Channel over Ethernet protocol */
+
+/*
+ * PXE support
+ *
+ */
+//#undef	PXE_STACK		/* PXE stack in iPXE - you want this! */
+//#undef	PXE_MENU		/* PXE menu booting */
+
+/*
+ * Download protocols
+ *
+ */
+
+#define	DOWNLOAD_PROTO_TFTP	/* Trivial File Transfer Protocol */
+#define	DOWNLOAD_PROTO_HTTP	/* Hypertext Transfer Protocol */
+#undef	DOWNLOAD_PROTO_HTTPS	/* Secure Hypertext Transfer Protocol */
+#undef	DOWNLOAD_PROTO_FTP	/* File Transfer Protocol */
+#undef	DOWNLOAD_PROTO_SLAM	/* Scalable Local Area Multicast */
+#undef	DOWNLOAD_PROTO_NFS	/* Network File System Protocol */
+
+/*
+ * SAN boot protocols
+ *
+ */
+
+//#undef	SANBOOT_PROTO_ISCSI	/* iSCSI protocol */
+//#undef	SANBOOT_PROTO_AOE	/* AoE protocol */
+//#undef	SANBOOT_PROTO_IB_SRP	/* Infiniband SCSI RDMA protocol */
+//#undef	SANBOOT_PROTO_FCP	/* Fibre Channel protocol */
+
+/*
+ * 802.11 cryptosystems and handshaking protocols
+ *
+ */
+#define	CRYPTO_80211_WEP	/* WEP encryption (deprecated and insecure!) */
+#define	CRYPTO_80211_WPA	/* WPA Personal, authenticating with passphrase */
+#define	CRYPTO_80211_WPA2	/* Add support for stronger WPA cryptography */
+
+/*
+ * Name resolution modules
+ *
+ */
+
+#define	DNS_RESOLVER		/* DNS resolver */
+
+/*
+ * Image types
+ *
+ * Etherboot supports various image formats.  Select whichever ones
+ * you want to use.
+ *
+ */
+//#define	IMAGE_NBI		/* NBI image support */
+//#define	IMAGE_ELF		/* ELF image support */
+//#define	IMAGE_MULTIBOOT		/* MultiBoot image support */
+//#define	IMAGE_PXE		/* PXE image support */
+//#define	IMAGE_SCRIPT		/* iPXE script image support */
+//#define	IMAGE_BZIMAGE		/* Linux bzImage image support */
+//#define	IMAGE_COMBOOT		/* SYSLINUX COMBOOT image support */
+//#define	IMAGE_EFI		/* EFI image support */
+//#define	IMAGE_SDI		/* SDI image support */
+//#define	IMAGE_PNM		/* PNM image support */
+//#define	IMAGE_PNG		/* PNG image support */
+
+/*
+ * Command-line commands to include
+ *
+ */
+#define	AUTOBOOT_CMD		/* Automatic booting */
+#define	NVO_CMD			/* Non-volatile option storage commands */
+#define	CONFIG_CMD		/* Option configuration console */
+#define	IFMGMT_CMD		/* Interface management commands */
+#define	IWMGMT_CMD		/* Wireless interface management commands */
+#define FCMGMT_CMD		/* Fibre Channel management commands */
+#define	ROUTE_CMD		/* Routing table management commands */
+#define IMAGE_CMD		/* Image management commands */
+#define DHCP_CMD		/* DHCP management commands */
+#define SANBOOT_CMD		/* SAN boot commands */
+#define MENU_CMD		/* Menu commands */
+#define LOGIN_CMD		/* Login command */
+#define SYNC_CMD		/* Sync command */
+//#define NSLOOKUP_CMD		/* DNS resolving command */
+//#define TIME_CMD		/* Time commands */
+//#define DIGEST_CMD		/* Image crypto digest commands */
+//#define LOTEST_CMD		/* Loopback testing commands */
+//#define VLAN_CMD		/* VLAN commands */
+//#define PXE_CMD		/* PXE commands */
+//#define REBOOT_CMD		/* Reboot command */
+//#define POWEROFF_CMD		/* Power off command */
+//#define IMAGE_TRUST_CMD	/* Image trust management commands */
+//#define PCI_CMD		/* PCI commands */
+//#define PARAM_CMD		/* Form parameter commands */
+//#define NEIGHBOUR_CMD		/* Neighbour management commands */
+//#define PING_CMD		/* Ping command */
+//#define CONSOLE_CMD		/* Console command */
+//#define IPSTAT_CMD		/* IP statistics commands */
+//#define PROFSTAT_CMD		/* Profiling commands */
+
+/*
+ * ROM-specific options
+ *
+ */
+#undef	NONPNP_HOOK_INT19	/* Hook INT19 on non-PnP BIOSes */
+
+/*
+ * Error message tables to include
+ *
+ */
+#undef	ERRMSG_80211		/* All 802.11 error descriptions (~3.3kb) */
+
+/*
+ * Obscure configuration options
+ *
+ * You probably don't need to touch these.
+ *
+ */
+
+#define	NETDEV_DISCARD_RATE 0	/* Drop every N packets (0=>no drop) */
+#undef	BUILD_SERIAL		/* Include an automatic build serial
+				 * number.  Add "bs" to the list of
+				 * make targets.  For example:
+				 * "make bin/rtl8139.dsk bs" */
+#undef	BUILD_ID		/* Include a custom build ID string,
+				 * e.g "test-foo" */
+#undef	NULL_TRAP		/* Attempt to catch NULL function calls */
+#undef	GDBSERIAL		/* Remote GDB debugging over serial */
+#undef	GDBUDP			/* Remote GDB debugging over UDP
+				 * (both may be set) */
+
+#include <config/named.h>
+#include NAMED_CONFIG(general.h)
+#include <config/local/general.h>
+#include LOCAL_NAMED_CONFIG(general.h)
+
+#endif /* CONFIG_GENERAL_H */