summaryrefslogtreecommitdiffstats
path: root/qemu/roms/ipxe/contrib/vm
diff options
context:
space:
mode:
authorRajithaY <rajithax.yerrumsetty@intel.com>2017-04-25 03:31:15 -0700
committerRajitha Yerrumchetty <rajithax.yerrumsetty@intel.com>2017-05-22 06:48:08 +0000
commitbb756eebdac6fd24e8919e2c43f7d2c8c4091f59 (patch)
treeca11e03542edf2d8f631efeca5e1626d211107e3 /qemu/roms/ipxe/contrib/vm
parenta14b48d18a9ed03ec191cf16b162206998a895ce (diff)
Adding qemu as a submodule of KVMFORNFV
This Patch includes the changes to add qemu as a submodule to kvmfornfv repo and make use of the updated latest qemu for the execution of all testcase Change-Id: I1280af507a857675c7f81d30c95255635667bdd7 Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>
Diffstat (limited to 'qemu/roms/ipxe/contrib/vm')
-rw-r--r--qemu/roms/ipxe/contrib/vm/.gitignore6
-rw-r--r--qemu/roms/ipxe/contrib/vm/Makefile7
-rw-r--r--qemu/roms/ipxe/contrib/vm/bochs-writable-ROM-patch15
-rw-r--r--qemu/roms/ipxe/contrib/vm/bochsrc.txt1131
-rwxr-xr-xqemu/roms/ipxe/contrib/vm/cow49
-rwxr-xr-xqemu/roms/ipxe/contrib/vm/serial-console278
6 files changed, 0 insertions, 1486 deletions
diff --git a/qemu/roms/ipxe/contrib/vm/.gitignore b/qemu/roms/ipxe/contrib/vm/.gitignore
deleted file mode 100644
index 610792ed8..000000000
--- a/qemu/roms/ipxe/contrib/vm/.gitignore
+++ /dev/null
@@ -1,6 +0,0 @@
-bochsout.txt
-parport.out
-ne2k-tx.log
-ne2k-txdump.txt
-bochs
-qemu
diff --git a/qemu/roms/ipxe/contrib/vm/Makefile b/qemu/roms/ipxe/contrib/vm/Makefile
deleted file mode 100644
index 3c0e645ab..000000000
--- a/qemu/roms/ipxe/contrib/vm/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-all : serial-console.1
-
-%.1 : %
- pod2man $< > $@
-
-clean :
- rm -f serial-console.1
diff --git a/qemu/roms/ipxe/contrib/vm/bochs-writable-ROM-patch b/qemu/roms/ipxe/contrib/vm/bochs-writable-ROM-patch
deleted file mode 100644
index dc586ddee..000000000
--- a/qemu/roms/ipxe/contrib/vm/bochs-writable-ROM-patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- memory/memory.cc 18 Oct 2008 18:10:14 -0000 1.71
-+++ memory/memory.cc 21 Oct 2008 19:47:07 -0000
-@@ -172,7 +172,11 @@
- break;
-
- case 0x0: // Writes to ROM, Inhibit
-- BX_DEBUG(("Write to ROM ignored: address 0x" FMT_PHY_ADDRX ", data %02x", a20addr, *data_ptr));
-+ if ((a20addr & 0xfffe0000) == 0x000e0000) {
-+ BX_DEBUG(("Write to ROM ignored: address 0x" FMT_PHY_ADDRX ", data %02x", a20addr, *data_ptr));
-+ } else {
-+ BX_MEM_THIS rom[(a20addr & EXROM_MASK) + BIOSROMSZ] = *data_ptr;
-+ }
- break;
-
- default:
diff --git a/qemu/roms/ipxe/contrib/vm/bochsrc.txt b/qemu/roms/ipxe/contrib/vm/bochsrc.txt
deleted file mode 100644
index d0f12504b..000000000
--- a/qemu/roms/ipxe/contrib/vm/bochsrc.txt
+++ /dev/null
@@ -1,1131 +0,0 @@
-# You may now use double quotes around pathnames, in case
-# your pathname includes spaces.
-
-#=======================================================================
-# PLUGIN_CTRL:
-# Controls the presence of optional device plugins. These plugins are loaded
-# directly with this option and some of them install a config option that is
-# only available when the plugin device is loaded. The value "1" means to load
-# the plugin and "0" will unload it (if loaded before).
-# These plugins are currently supported: 'biosdev', 'e1000', 'es1370',
-# 'extfpuirq', 'gameport', 'iodebug', 'ne2k', 'parallel', 'pcidev', 'pcipnic',
-# 'sb16', 'serial', 'speaker', 'unmapped', 'usb_ohci', 'usb_uhci' and 'usb_xhci'.
-#=======================================================================
-plugin_ctrl: unmapped=1, biosdev=1, speaker=1, e1000=1, parallel=1, serial=1
-
-#=======================================================================
-# CONFIG_INTERFACE
-#
-# The configuration interface is a series of menus or dialog boxes that
-# allows you to change all the settings that control Bochs's behavior.
-# Depending on the platform there are up to 3 choices of configuration
-# interface: a text mode version called "textconfig" and two graphical versions
-# called "win32config" and "wx". The text mode version uses stdin/stdout and
-# is always compiled in, unless Bochs is compiled for wx only. The choice
-# "win32config" is only available on win32 and it is the default there.
-# The choice "wx" is only available when you use "--with-wx" on the configure
-# command. If you do not write a config_interface line, Bochs will
-# choose a default for you.
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#=======================================================================
-#config_interface: textconfig
-#config_interface: win32config
-#config_interface: wx
-
-#=======================================================================
-# DISPLAY_LIBRARY
-#
-# The display library is the code that displays the Bochs VGA screen. Bochs
-# has a selection of about 10 different display library implementations for
-# different platforms. If you run configure with multiple --with-* options,
-# the display_library command lets you choose which one you want to run with.
-# If you do not write a display_library line, Bochs will choose a default for
-# you.
-#
-# The choices are:
-# x use X windows interface, cross platform
-# win32 use native win32 libraries
-# carbon use Carbon library (for MacOS X)
-# macintosh use MacOS pre-10
-# amigaos use native AmigaOS libraries
-# sdl use SDL library, cross platform
-# svga use SVGALIB library for Linux, allows graphics without X11
-# term text only, uses curses/ncurses library, cross platform
-# rfb provides an interface to AT&T's VNC viewer, cross platform
-# wx use wxWidgets library, cross platform
-# nogui no display at all
-#
-# NOTE: if you use the "wx" configuration interface, you must also use
-# the "wx" display library.
-#
-# Specific options:
-# Some display libraries now support specific options to control their
-# behaviour. These options are supported by more than one display library:
-#
-# "gui_debug" - use GTK debugger gui (sdl, x) / Win32 debugger gui (win32)
-# "hideIPS" - disable IPS output in status bar (sdl, wx, x)
-# "nokeyrepeat" - turn off host keyboard repeat (sdl, win32, x)
-#
-# See the examples below for other currently supported options.
-#=======================================================================
-#display_library: amigaos
-#display_library: carbon
-#display_library: macintosh
-#display_library: nogui
-#display_library: rfb, options="timeout=60" # time to wait for client
-#display_library: sdl, options="fullscreen" # startup in fullscreen mode
-#display_library: term
-#display_library: win32
-#display_library: wx
-#display_library: x
-
-#=======================================================================
-# ROMIMAGE:
-# The ROM BIOS controls what the PC does when it first powers on.
-# Normally, you can use a precompiled BIOS in the source or binary
-# distribution called BIOS-bochs-latest. The ROM BIOS is usually loaded
-# starting at address 0xf0000, and it is exactly 64k long. Another option
-# is 128k BIOS which is loaded at address 0xe0000.
-# You can also use the environment variable $BXSHARE to specify the
-# location of the BIOS.
-# The usage of external large BIOS images (up to 512k) at memory top is
-# now supported, but we still recommend to use the BIOS distributed with
-# Bochs. The start address optional, since it can be calculated from image size.
-#=======================================================================
-#romimage: file=$BXSHARE/BIOS-bochs-latest
-#romimage: file=bios/seabios-1.6.3.bin
-#romimage: file=mybios.bin, address=0xfff80000 # 512k at memory top
-romimage: file=bochs/bios/BIOS-bochs-latest
-
-#=======================================================================
-# CPU:
-# This defines cpu-related parameters inside Bochs:
-#
-# MODEL:
-# Selects CPU configuration to emulate from pre-defined list of all
-# supported configurations. When this option is used, the CPUID option
-# has no effect anymore.
-#
-# CPU configurations that can be selected:
-# -----------------------------------------------------------------
-# pentium_mmx Intel Pentium MMX
-# amd_k6_2_chomper AMD-K6(tm) 3D processor (Chomper)
-# p2_klamath Intel Pentium II (Klamath)
-# p3_katmai Intel Pentium III (Katmai)
-# p4_willamette Intel(R) Pentium(R) 4 (Willamette)
-# core_duo_t2400_yonah Intel(R) Core(TM) Duo CPU T2400 (Yonah)
-# atom_n270 Intel(R) Atom(TM) CPU N270
-# athlon64_clawhammer AMD Athlon(tm) 64 Processor 2800+ (Clawhammer)
-# athlon64_venice AMD Athlon(tm) 64 Processor 3000+ (Venice)
-# turion64_tyler AMD Turion(tm) 64 X2 Mobile TL-60 (Tyler)
-# phenom_8650_toliman AMD Phenom X3 8650 (Toliman)
-# p4_prescott_celeron_336 Intel(R) Celeron(R) 336 (Prescott)
-# core2_penryn_t9600 Intel Mobile Core 2 Duo T9600 (Penryn)
-# corei5_lynnfield_750 Intel(R) Core(TM) i5 750 (Lynnfield)
-# corei5_arrandale_m520 Intel(R) Core(TM) i5 M 520 (Arrandale)
-# corei7_sandy_bridge_2600k Intel(R) Core(TM) i7-2600K (Sandy Bridge)
-# corei7_ivy_bridge_3770k Intel(R) Core(TM) i7-3770K CPU (Ivy Bridge)
-#
-# COUNT:
-# Set the number of processors:cores per processor:threads per core
-# when Bochs is compiled for SMP emulation.
-# Bochs currently supports up to 8 threads running simultaniosly.
-# If Bochs is compiled without SMP support, it won't accept values
-# different from 1.
-#
-# QUANTUM:
-# Maximum amount of instructions allowed to execute by processor before
-# returning control to another cpu. This option exists only in Bochs
-# binary compiled with SMP support.
-#
-# RESET_ON_TRIPLE_FAULT:
-# Reset the CPU when triple fault occur (highly recommended) rather than
-# PANIC. Remember that if you trying to continue after triple fault the
-# simulation will be completely bogus !
-#
-# CPUID_LIMIT_WINNT:
-# Determine whether to limit maximum CPUID function to 2. This mode is
-# required to workaround WinNT installation and boot issues.
-#
-# MSRS:
-# Define path to user CPU Model Specific Registers (MSRs) specification.
-# See example in msrs.def.
-#
-# IGNORE_BAD_MSRS:
-# Ignore MSR references that Bochs does not understand; print a warning
-# message instead of generating #GP exception. This option is enabled
-# by default but will not be avaiable if configurable MSRs are enabled.
-#
-# MWAIT_IS_NOP:
-# When this option is enabled MWAIT will not put the CPU into a sleep state.
-# This option exists only if Bochs compiled with --enable-monitor-mwait.
-#
-# IPS:
-# Emulated Instructions Per Second. This is the number of IPS that bochs
-# is capable of running on your machine. You can recompile Bochs with
-# --enable-show-ips option enabled, to find your host's capability.
-# Measured IPS value will then be logged into your log file or shown
-# in the status bar (if supported by the gui).
-#
-# IPS is used to calibrate many time-dependent events within the bochs
-# simulation. For example, changing IPS affects the frequency of VGA
-# updates, the duration of time before a key starts to autorepeat, and
-# the measurement of BogoMips and other benchmarks.
-#
-# Examples:
-#
-# Bochs Machine/Compiler Mips
-# ______________________________________________________________________
-# 2.4.6 3.4Ghz Intel Core i7 2600 with Win7x64/g++ 4.5.2 85 to 95 Mips
-# 2.3.7 3.2Ghz Intel Core 2 Q9770 with WinXP/g++ 3.4 50 to 55 Mips
-# 2.3.7 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 38 to 43 Mips
-# 2.2.6 2.6Ghz Intel Core 2 Duo with WinXP/g++ 3.4 21 to 25 Mips
-# 2.2.6 2.1Ghz Athlon XP with Linux 2.6/g++ 3.4 12 to 15 Mips
-#=======================================================================
-cpu: model=core2_penryn_t9600, count=1, ips=50000000, reset_on_triple_fault=1, ignore_bad_msrs=1, msrs="msrs.def"
-cpu: cpuid_limit_winnt=0
-
-#=======================================================================
-# CPUID:
-#
-# This defines features and functionality supported by Bochs emulated CPU.
-# The option has no offect if CPU model was selected in CPU option.
-#
-# MMX:
-# Select MMX instruction set support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
-#
-# APIC:
-# Select APIC configuration (LEGACY/XAPIC/XAPIC_EXT/X2APIC).
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 5.
-#
-# SEP:
-# Select SYSENTER/SYSEXIT instruction set support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# SSE:
-# Select SSE instruction set support.
-# Any of NONE/SSE/SSE2/SSE3/SSSE3/SSE4_1/SSE4_2 could be selected.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# SSE4A:
-# Select AMD SSE4A instructions support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# AES:
-# Select AES instruction set support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# MOVBE:
-# Select MOVBE Intel(R) Atom instruction support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# XSAVE:
-# Select XSAVE extensions support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# XSAVEOPT:
-# Select XSAVEOPT instruction support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# AVX:
-# Select AVX/AVX2 instruction set support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# AVX_F16C:
-# Select AVX float16 convert instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# AVX_FMA:
-# Select AVX fused multiply add (FMA) instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# BMI:
-# Select BMI1/BMI2 instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# XOP:
-# Select AMD XOP instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# FMA4:
-# Select AMD four operand FMA instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# TBM:
-# Select AMD Trailing Bit Manipulation (TBM) instructions support.
-# This option exists only if Bochs compiled with --enable-avx option.
-#
-# X86-64:
-# Enable x86-64 and long mode support.
-# This option exists only if Bochs compiled with x86-64 support.
-#
-# 1G_PAGES:
-# Enable 1G page size support in long mode.
-# This option exists only if Bochs compiled with x86-64 support.
-#
-# PCID:
-# Enable Process-Context Identifiers (PCID) support in long mode.
-# This option exists only if Bochs compiled with x86-64 support.
-#
-# FSGSBASE:
-# Enable GS/GS BASE access instructions support in long mode.
-# This option exists only if Bochs compiled with x86-64 support.
-#
-# SMEP:
-# Enable Supervisor Mode Execution Protection (SMEP) support.
-# This option exists only if Bochs compiled with BX_CPU_LEVEL >= 6.
-#
-# MWAIT:
-# Select MONITOR/MWAIT instructions support.
-# This option exists only if Bochs compiled with --enable-monitor-mwait.
-#
-# VMX:
-# Select VMX extensions emulation support.
-# This option exists only if Bochs compiled with --enable-vmx option.
-#
-# VENDOR_STRING:
-# Set the CPUID vendor string returned by CPUID(0x0). This should be a
-# twelve-character ASCII string.
-#
-# BRAND_STRING:
-# Set the CPUID vendor string returned by CPUID(0x80000002 .. 0x80000004).
-# This should be at most a forty-eight-character ASCII string.
-#
-# FAMILY:
-# Set model information returned by CPUID. Default family value determined
-# by configure option --enable-cpu-level.
-#
-# MODEL:
-# Set model information returned by CPUID. Default model value is 3.
-#
-# STEPPING:
-# Set stepping information returned by CPUID. Default stepping value is 3.
-#=======================================================================
-#cpuid: x86_64=1, mmx=1, sep=1, sse=sse4_2, apic=xapic, aes=1, movbe=1, xsave=1
-#cpuid: family=6, model=0x1a, stepping=5
-
-#=======================================================================
-# MEMORY
-# Set the amount of physical memory you want to emulate.
-#
-# GUEST:
-# Set amount of guest physical memory to emulate. The default is 32MB,
-# the maximum amount limited only by physical address space limitations.
-#
-# HOST:
-# Set amount of host memory you want to allocate for guest RAM emulation.
-# It is possible to allocate less memory than you want to emulate in guest
-# system. This will fake guest to see the non-existing memory. Once guest
-# system touches new memory block it will be dynamically taken from the
-# memory pool. You will be warned (by FATAL PANIC) in case guest already
-# used all allocated host memory and wants more.
-#
-#=======================================================================
-memory: guest=512, host=256
-
-#=======================================================================
-# OPTROMIMAGE[1-4]:
-# You may now load up to 4 optional ROM images. Be sure to use a
-# read-only area, typically between C8000 and EFFFF. These optional
-# ROM images should not overwrite the rombios (located at
-# F0000-FFFFF) and the videobios (located at C0000-C7FFF).
-# Those ROM images will be initialized by the bios if they contain
-# the right signature (0x55AA) and a valid checksum.
-# It can also be a convenient way to upload some arbitrary code/data
-# in the simulation, that can be retrieved by the boot loader
-#=======================================================================
-#optromimage1: file=optionalrom.bin, address=0xd0000
-#optromimage2: file=optionalrom.bin, address=0xd1000
-#optromimage3: file=optionalrom.bin, address=0xd2000
-#optromimage4: file=optionalrom.bin, address=0xd3000
-optromimage1: file=../../src/bin/intel.rom, address=0xcb000
-
-#optramimage1: file=/path/file1.img, address=0x0010000
-#optramimage2: file=/path/file2.img, address=0x0020000
-#optramimage3: file=/path/file3.img, address=0x0030000
-#optramimage4: file=/path/file4.img, address=0x0040000
-
-#=======================================================================
-# VGAROMIMAGE
-# You now need to load a VGA ROM BIOS into C0000.
-#=======================================================================
-#vgaromimage: file=bios/VGABIOS-elpin-2.40
-#vgaromimage: file=$BXSHARE/VGABIOS-lgpl-latest
-#vgaromimage: file=bios/VGABIOS-lgpl-latest-cirrus
-vgaromimage: file=bochs/bios/VGABIOS-lgpl-latest
-
-#=======================================================================
-# VGA:
-# This defines parameters related to the VGA display
-#
-# EXTENSION
-# Here you can specify the display extension to be used. With the value
-# 'none' you can use standard VGA with no extension. Other supported
-# values are 'vbe' for Bochs VBE and 'cirrus' for Cirrus SVGA support.
-#
-# UPDATE_FREQ
-# The VGA update frequency is based on the emulated clock and the default
-# value is 5. Keep in mind that you must tweak the 'cpu: ips=N' directive
-# to be as close to the number of emulated instructions-per-second your
-# workstation can do, for this to be accurate. If the realtime sync is
-# enabled with the 'clock' option, the value is based on the real time.
-# This parameter can be changed at runtime.
-#
-# Examples:
-# vga: extension=cirrus, update_freq=10
-#=======================================================================
-#vga: extension=vbe, update_freq=5
-
-#=======================================================================
-# FLOPPYA:
-# Point this to pathname of floppy image file or device
-# This should be of a bootable floppy(image/device) if you're
-# booting from 'a' (or 'floppy').
-#
-# You can set the initial status of the media to 'ejected' or 'inserted'.
-# floppya: 2_88=path, status=ejected (2.88M 3.5" media)
-# floppya: 1_44=path, status=inserted (1.44M 3.5" media)
-# floppya: 1_2=path, status=ejected (1.2M 5.25" media)
-# floppya: 720k=path, status=inserted (720K 3.5" media)
-# floppya: 360k=path, status=inserted (360K 5.25" media)
-# floppya: 320k=path, status=inserted (320K 5.25" media)
-# floppya: 180k=path, status=inserted (180K 5.25" media)
-# floppya: 160k=path, status=inserted (160K 5.25" media)
-# floppya: image=path, status=inserted (guess media type from image size)
-# floppya: 1_44=vvfat:path, status=inserted (use directory as VFAT media)
-# floppya: type=1_44 (1.44M 3.5" floppy drive, no media)
-#
-# The path should be the name of a disk image file. On Unix, you can use a raw
-# device name such as /dev/fd0 on Linux. On win32 platforms, use drive letters
-# such as a: or b: as the path. The parameter 'image' works with image files
-# only. In that case the size must match one of the supported types.
-# The parameter 'type' can be used to enable the floppy drive without media
-# and status specified. Usually the drive type is set up based on the media type.
-# The optional parameter 'write_protected' can be used to control the media
-# write protect switch. By default it is turned off.
-#=======================================================================
-#floppya: 1_44=/dev/fd0, status=inserted
-#floppya: image=../1.44, status=inserted
-#floppya: 1_44=/dev/fd0H1440, status=inserted
-#floppya: 1_2=../1_2, status=inserted
-#floppya: 1_44=a:, status=inserted
-#floppya: 1_44=a.img, status=inserted, write_protected=1
-#floppya: 1_44=/dev/rfd0a, status=inserted
-floppya: 1_44=../../src/bin/ipxe.dsk, status=inserted
-
-#=======================================================================
-# FLOPPYB:
-# See FLOPPYA above for syntax
-#=======================================================================
-#floppyb: 1_44=b:, status=inserted
-#floppyb: 1_44=b.img, status=inserted
-
-#=======================================================================
-# ATA0, ATA1, ATA2, ATA3
-# ATA controller for hard disks and cdroms
-#
-# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number
-#
-# These options enables up to 4 ata channels. For each channel
-# the two base io addresses and the irq must be specified.
-#
-# ata0 and ata1 are enabled by default with the values shown below
-#
-# Examples:
-# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9
-#=======================================================================
-ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
-ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11
-ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9
-
-#=======================================================================
-# ATA[0-3]-MASTER, ATA[0-3]-SLAVE
-#
-# This defines the type and characteristics of all attached ata devices:
-# type= type of attached device [disk|cdrom]
-# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3]
-# mode= only valid for disks [undoable|growing|volatile|vvfat]
-# path= path of the image / directory
-# cylinders= only valid for disks
-# heads= only valid for disks
-# spt= only valid for disks
-# status= only valid for cdroms [inserted|ejected]
-# biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos]
-# translation=type of translation of the bios, only for disks [none|lba|large|rechs|auto]
-# model= string returned by identify device command
-# journal= optional filename of the redolog for undoable, volatile and vvfat disks
-#
-# Point this at a hard disk image file, cdrom iso file, or physical cdrom
-# device. To create a hard disk image, try running bximage. It will help you
-# choose the size and then suggest a line that works with it.
-#
-# In UNIX it may be possible to use a raw device as a Bochs hard disk,
-# but WE DON'T RECOMMEND IT. In Windows there is no easy way.
-#
-# In windows, the drive letter + colon notation should be used for cdroms.
-# Depending on versions of windows and drivers, you may only be able to
-# access the "first" cdrom in the system. On MacOSX, use path="drive"
-# to access the physical drive.
-#
-# The path is mandatory for hard disks. Disk geometry autodetection works with
-# images created by bximage if CHS is set to 0/0/0 (cylinders are calculated
-# using heads=16 and spt=63). For other hard disk images and modes the
-# cylinders, heads, and spt are mandatory. In all cases the disk size reported
-# from the image must be exactly C*H*S*512.
-#
-# Default values are:
-# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234"
-#
-# The biosdetect option has currently no effect on the bios
-#
-# Examples:
-# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17
-# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17
-# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17
-# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17
-# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17
-# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17
-# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63
-# ata3-slave: type=cdrom, path=iso.sample, status=inserted
-#=======================================================================
-#ata0-master: type=disk, mode=flat, path="30M.sample"
-#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17
-#ata0-master: type=disk, mode=flat, path="c.img", cylinders=0 # autodetect
-#ata0-slave: type=disk, mode=vvfat, path=/bochs/images/vvfat, journal=vvfat.redolog
-#ata0-slave: type=cdrom, path=D:, status=inserted
-#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted
-#ata0-slave: type=cdrom, path="drive", status=inserted
-#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted
-
-#=======================================================================
-# BOOT:
-# This defines the boot sequence. Now you can specify up to 3 boot drives,
-# which can be 'floppy', 'disk', 'cdrom' or 'network' (boot ROM).
-# Legacy 'a' and 'c' are also supported.
-# Examples:
-# boot: floppy
-# boot: cdrom, disk
-# boot: network, disk
-# boot: cdrom, floppy, disk
-#=======================================================================
-#boot: floppy
-#boot: disk
-boot: network, floppy
-
-#=======================================================================
-# CLOCK:
-# This defines the parameters of the clock inside Bochs:
-#
-# SYNC:
-# This defines the method how to synchronize the Bochs internal time
-# with realtime. With the value 'none' the Bochs time relies on the IPS
-# value and no host time synchronization is used. The 'slowdown' method
-# sacrifices performance to preserve reproducibility while allowing host
-# time correlation. The 'realtime' method sacrifices reproducibility to
-# preserve performance and host-time correlation.
-# It is possible to enable both synchronization methods.
-#
-# RTC_SYNC:
-# If this option is enabled together with the realtime synchronization,
-# the RTC runs at realtime speed. This feature is disabled by default.
-#
-# TIME0:
-# Specifies the start (boot) time of the virtual machine. Use a time
-# value as returned by the time(2) system call. If no time0 value is
-# set or if time0 equal to 1 (special case) or if time0 equal 'local',
-# the simulation will be started at the current local host time.
-# If time0 equal to 2 (special case) or if time0 equal 'utc',
-# the simulation will be started at the current utc time.
-#
-# Syntax:
-# clock: sync=[none|slowdown|realtime|both], time0=[timeValue|local|utc]
-#
-# Example:
-# clock: sync=none, time0=local # Now (localtime)
-# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980
-# clock: sync=none, time0=631148400 # Mon Jan 1 00:00:00 1990
-# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999
-# clock: sync=realtime, time0=946681200 # Sat Jan 1 00:00:00 2000
-# clock: sync=none, time0=1 # Now (localtime)
-# clock: sync=none, time0=utc # Now (utc/gmt)
-#
-# Default value are sync=none, time0=local
-#=======================================================================
-#clock: sync=none, time0=local
-
-
-#=======================================================================
-# FLOPPY_BOOTSIG_CHECK: disabled=[0|1]
-# Enables or disables the 0xaa55 signature check on boot floppies
-# Defaults to disabled=0
-# Examples:
-# floppy_bootsig_check: disabled=0
-# floppy_bootsig_check: disabled=1
-#=======================================================================
-floppy_bootsig_check: disabled=0
-
-#=======================================================================
-# LOG:
-# Give the path of the log file you'd like Bochs debug and misc. verbiage
-# to be written to. If you don't use this option or set the filename to
-# '-' the output is written to the console. If you really don't want it,
-# make it "/dev/null" (Unix) or "nul" (win32). :^(
-#
-# Examples:
-# log: ./bochs.out
-# log: /dev/tty
-#=======================================================================
-#log: /dev/null
-log: bochsout.txt
-
-#=======================================================================
-# LOGPREFIX:
-# This handles the format of the string prepended to each log line.
-# You may use those special tokens :
-# %t : 11 decimal digits timer tick
-# %i : 8 hexadecimal digits of cpu current eip (ignored in SMP configuration)
-# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror)
-# %d : 5 characters string of the device, between brackets
-#
-# Default : %t%e%d
-# Examples:
-# logprefix: %t-%e-@%i-%d
-# logprefix: %i%e%d
-#=======================================================================
-#logprefix: %t%e%d
-
-#=======================================================================
-# LOG CONTROLS
-#
-# Bochs has four severity levels for event logging.
-# panic: cannot proceed. If you choose to continue after a panic,
-# don't be surprised if you get strange behavior or crashes.
-# error: something went wrong, but it is probably safe to continue the
-# simulation.
-# info: interesting or useful messages.
-# debug: messages useful only when debugging the code. This may
-# spit out thousands per second.
-#
-# For events of each level, you can choose to exit Bochs ('fatal'), 'report'
-# or 'ignore'. On some guis you have the additional choice 'ask'. A gui dialog
-# appears asks how to proceed.
-#
-# It is also possible to specify the 'action' to do for each Bochs facility
-# separately (e.g. crash on panics from everything except the cdrom, and only
-# report those). See the 'log function' module list in the user documentation.
-#
-# If you are experiencing many panics, it can be helpful to change
-# the panic action to report instead of fatal. However, be aware
-# that anything executed after a panic is uncharted territory and can
-# cause bochs to become unstable. The panic is a "graceful exit," so
-# if you disable it you may get a spectacular disaster instead.
-#=======================================================================
-panic: action=ask
-error: action=report
-info: action=report
-debug: action=ignore, pci=report # report BX_DEBUG from module 'pci'
-
-#=======================================================================
-# DEBUGGER_LOG:
-# Give the path of the log file you'd like Bochs to log debugger output.
-# If you really don't want it, make it /dev/null or '-'. :^(
-#
-# Examples:
-# debugger_log: ./debugger.out
-#=======================================================================
-#debugger_log: /dev/null
-#debugger_log: debugger.out
-debugger_log: -
-
-#=======================================================================
-# COM1, COM2, COM3, COM4:
-# This defines a serial port (UART type 16550A). In the 'term' you can specify
-# a device to use as com1. This can be a real serial line, or a pty. To use
-# a pty (under X/Unix), create two windows (xterms, usually). One of them will
-# run bochs, and the other will act as com1. Find out the tty the com1
-# window using the `tty' command, and use that as the `dev' parameter.
-# Then do `sleep 1000000' in the com1 window to keep the shell from
-# messing with things, and run bochs in the other window. Serial I/O to
-# com1 (port 0x3f8) will all go to the other window.
-# In socket* and pipe* (win32 only) modes Bochs becomes either socket/named pipe
-# client or server. In client mode it connects to an already running server (if
-# connection fails Bochs treats com port as not connected). In server mode it
-# opens socket/named pipe and waits until a client application connects to it
-# before starting simulation. This mode is useful for remote debugging (e.g.
-# with gdb's "target remote host:port" command or windbg's command line option
-# -k com:pipe,port=\\.\pipe\pipename). Note: 'socket' is a shorthand for
-# 'socket-client' and 'pipe' for 'pipe-client'. Socket modes use simple TCP
-# communication, pipe modes use duplex byte mode pipes.
-# Other serial modes are 'null' (no input/output), 'file' (output to a file
-# specified as the 'dev' parameter), 'raw' (use the real serial port - under
-# construction for win32), 'mouse' (standard serial mouse - requires
-# mouse option setting 'type=serial', 'type=serial_wheel' or 'type=serial_msys').
-#
-# Examples:
-# com1: enabled=1, mode=null
-# com1: enabled=1, mode=mouse
-# com2: enabled=1, mode=file, dev=serial.out
-# com3: enabled=1, mode=raw, dev=com1
-# com3: enabled=1, mode=socket-client, dev=localhost:8888
-# com3: enabled=1, mode=socket-server, dev=localhost:8888
-# com4: enabled=1, mode=pipe-client, dev=\\.\pipe\mypipe
-# com4: enabled=1, mode=pipe-server, dev=\\.\pipe\mypipe
-#=======================================================================
-#com1: enabled=1, mode=term, dev=/dev/ttyp9
-
-
-#=======================================================================
-# PARPORT1, PARPORT2:
-# This defines a parallel (printer) port. When turned on and an output file is
-# defined the emulated printer port sends characters printed by the guest OS
-# into the output file. On some platforms a device filename can be used to
-# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on
-# win32 platforms).
-#
-# Examples:
-# parport1: enabled=1, file="parport.out"
-# parport2: enabled=1, file="/dev/lp0"
-# parport1: enabled=0
-#=======================================================================
-parport1: enabled=1, file="parport.out"
-
-#=======================================================================
-# SB16:
-# This defines the SB16 sound emulation. It can have several of the
-# following properties.
-# All properties are in the format sb16: property=value
-# enabled:
-# This optional property controls the presence of the SB16 emulation.
-# The emulation is turned on unless this property is used and set to 0.
-# midi: The filename is where the midi data is sent. This can be a
-# device or just a file if you want to record the midi data.
-# midimode:
-# 0=no data
-# 1=output to device (system dependent. midi denotes the device driver)
-# 2=SMF file output, including headers
-# 3=output the midi data stream to the file (no midi headers and no
-# delta times, just command and data bytes)
-# wave: This is the device/file where wave output is stored
-# wavemode:
-# 0=no data
-# 1=output to device (system dependent. wave denotes the device driver)
-# 2=VOC file output, incl. headers
-# 3=output the raw wave stream to the file
-# log: The file to write the sb16 emulator messages to.
-# loglevel:
-# 0=no log
-# 1=resource changes, midi program and bank changes
-# 2=severe errors
-# 3=all errors
-# 4=all errors plus all port accesses
-# 5=all errors and port accesses plus a lot of extra info
-# dmatimer:
-# microseconds per second for a DMA cycle. Make it smaller to fix
-# non-continuous sound. 750000 is usually a good value. This needs a
-# reasonably correct setting for the IPS parameter of the CPU option.
-#
-# Examples for output devices:
-# sb16: midimode=1, midi="", wavemode=1, wave="" # win32
-# sb16: midimode=1, midi=alsa:128:0, wavemode=1, wave=alsa # Linux with ALSA
-#=======================================================================
-#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000
-
-#=======================================================================
-# ES1370:
-# This defines the ES1370 sound emulation. The parameter 'enabled' controls the
-# presence of the device. In addition to this, it must be loaded with 'plugin_ctrl'
-# and assigned to a PCI slot. The 'wavedev' parameter is similar to the 'wave'
-# parameter of the SB16 soundcard. The emulation supports recording and playback
-# (except DAC1+DAC2 output at the same time).
-#
-# Examples:
-# es1370: enabled=1, wavedev="" # win32
-# es1370: enabled=1, wavedev=alsa # Linux with ALSA
-#=======================================================================
-#es1370: enabled=1, wavedev=alsa
-
-#=======================================================================
-# KEYBOARD_SERIAL_DELAY:
-# Approximate time in microseconds that it takes one character to
-# be transfered from the keyboard to controller over the serial path.
-# Examples:
-# keyboard_serial_delay: 200
-#=======================================================================
-keyboard_serial_delay: 250
-
-#=======================================================================
-# KEYBOARD_PASTE_DELAY:
-# Approximate time in microseconds between attempts to paste
-# characters to the keyboard controller. This leaves time for the
-# guest os to deal with the flow of characters. The ideal setting
-# depends on how your operating system processes characters. The
-# default of 100000 usec (.1 seconds) was chosen because it works
-# consistently in Windows.
-#
-# If your OS is losing characters during a paste, increase the paste
-# delay until it stops losing characters.
-#
-# Examples:
-# keyboard_paste_delay: 100000
-#=======================================================================
-keyboard_paste_delay: 100000
-
-#=======================================================================
-# MOUSE:
-# This defines parameters for the emulated mouse type, the initial status
-# of the mouse capture and the runtime method to toggle it.
-#
-# TYPE:
-# With the mouse type option you can select the type of mouse to emulate.
-# The default value is 'ps2'. The other choices are 'imps2' (wheel mouse
-# on PS/2), 'serial', 'serial_wheel' and 'serial_msys' (one com port requires
-# setting 'mode=mouse'). To connect a mouse to an USB port, see the 'usb_uhci',
-# 'usb_ohci' or 'usb_xhci' options (requires PCI and USB support).
-#
-# ENABLED:
-# The Bochs gui creates mouse "events" unless the 'enabled' option is
-# set to 0. The hardware emulation itself is not disabled by this.
-# Unless you have a particular reason for enabling the mouse by default,
-# it is recommended that you leave it off. You can also toggle the mouse
-# usage at runtime (RFB, SDL, Win32, wxWidgets and X11 - see below).
-#
-# TOGGLE:
-# The default method to toggle the mouse capture at runtime is to press the
-# CTRL key and the middle mouse button ('ctrl+mbutton'). This option allows
-# to change the method to 'ctrl+f10' (like DOSBox), 'ctrl+alt' (like QEMU)
-# or 'f12' (replaces win32 'legacyF12' option).
-#
-# Examples:
-# mouse: enabled=1
-# mouse: type=imps2, enabled=1
-# mouse: type=serial, enabled=1
-# mouse: enabled=0, toggle=ctrl+f10
-#=======================================================================
-mouse: enabled=0
-
-#=======================================================================
-# private_colormap: Request that the GUI create and use it's own
-# non-shared colormap. This colormap will be used
-# when in the bochs window. If not enabled, a
-# shared colormap scheme may be used. Not implemented
-# on all GUI's.
-#
-# Examples:
-# private_colormap: enabled=1
-# private_colormap: enabled=0
-#=======================================================================
-private_colormap: enabled=0
-
-#=======================================================================
-# fullscreen: ONLY IMPLEMENTED ON AMIGA
-# Request that Bochs occupy the entire screen instead of a
-# window.
-#
-# Examples:
-# fullscreen: enabled=0
-# fullscreen: enabled=1
-#=======================================================================
-#fullscreen: enabled=0
-#screenmode: name="sample"
-
-#=======================================================================
-# ne2k: NE2000 compatible ethernet adapter
-#
-# Format:
-# ne2k: enabled=1, ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE,
-# ethdev=DEVICE, script=SCRIPT, bootrom=BOOTROM
-#
-# IOADDR, IRQ: You probably won't need to change ioaddr and irq, unless there
-# are IRQ conflicts. These arguments are ignored when assign the ne2k to a
-# PCI slot.
-#
-# MAC: The MAC address MUST NOT match the address of any machine on the net.
-# Also, the first byte must be an even number (bit 0 set means a multicast
-# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast
-# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may
-# be other restrictions too. To be safe, just use the b0:c4... address.
-#
-# ETHDEV: The ethdev value is the name of the network interface on your host
-# platform. On UNIX machines, you can get the name by running ifconfig. On
-# Windows machines, you must run niclist to get the name of the ethdev.
-# Niclist source code is in misc/niclist.c and it is included in Windows
-# binary releases.
-#
-# SCRIPT: The script value is optional, and is the name of a script that
-# is executed after bochs initialize the network interface. You can use
-# this script to configure this network interface, or enable masquerading.
-# This is mainly useful for the tun/tap devices that only exist during
-# Bochs execution. The network interface name is supplied to the script
-# as first parameter.
-#
-# BOOTROM: The bootrom value is optional, and is the name of the ROM image
-# to load. Note that this feature is only implemented for the PCI version of
-# the NE2000.
-#
-# If you don't want to make connections to any physical networks,
-# you can use the following 'ethmod's to simulate a virtual network.
-# null: All packets are discarded, but logged to a few files.
-# vde: Virtual Distributed Ethernet
-# vnet: ARP, ICMP-echo(ping), DHCP and read/write TFTP are simulated.
-# The virtual host uses 192.168.10.1.
-# DHCP assigns 192.168.10.2 to the guest.
-# TFTP uses the 'ethdev' value for the root directory and doesn't
-# overwrite files.
-#
-#=======================================================================
-# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD
-# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0
-# ne2k: ioaddr=0x300, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=/dev/net/tun0, script=./tunconfig
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=null, ethdev=eth0
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vde, ethdev="/tmp/vde.ctl"
-# ne2k: ioaddr=0x300, irq=9, mac=b0:c4:20:00:00:01, ethmod=vnet, ethdev="c:/temp"
-# ne2k: mac=b0:c4:20:00:00:01, ethmod=slirp, script=/usr/local/bin/slirp, bootrom=ne2k_pci.rom
-
-#=======================================================================
-# pnic: Bochs/Etherboot pseudo-NIC
-#
-# Format:
-# pnic: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT,
-# bootrom=BOOTROM
-#
-# The pseudo-NIC accepts the same syntax (for mac, ethmod, ethdev, script,
-# bootrom) and supports the same networking modules as the NE2000 adapter.
-# In addition to this, it must be loaded with 'plugin_ctrl' and assigned
-# to a PCI slot.
-#=======================================================================
-#pnic: enabled=1, mac=b0:c4:20:00:00:00, ethmod=vnet
-
-#=======================================================================
-# e1000: Intel(R) 82540EM Gigabit Ethernet adapter
-#
-# Format:
-# e1000: enabled=1, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT
-# bootrom=BOOTROM
-#
-# The E1000 accepts the same syntax (for mac, ethmod, ethdev, script, bootrom)
-# and supports the same networking modules as the NE2000 adapter. In addition
-# to this, it must be loaded with 'plugin_ctrl' and assigned to a PCI slot.
-#=======================================================================
-#e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=slirp, script=/usr/local/bin/slirp
-e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=tuntap, ethdev=/dev/net/tun:tap0
-
-#=======================================================================
-# KEYBOARD_MAPPING:
-# This enables a remap of a physical localized keyboard to a
-# virtualized us keyboard, as the PC architecture expects.
-# If enabled, the keymap file must be specified.
-#
-# Examples:
-# keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map
-#=======================================================================
-keyboard_mapping: enabled=0, map=
-
-#=======================================================================
-# KEYBOARD_TYPE:
-# Type of keyboard return by a "identify keyboard" command to the
-# keyboard controler. It must be one of "xt", "at" or "mf".
-# Defaults to "mf". It should be ok for almost everybody. A known
-# exception is french macs, that do have a "at"-like keyboard.
-#
-# Examples:
-# keyboard_type: mf
-#=======================================================================
-#keyboard_type: mf
-
-#=======================================================================
-# USER_SHORTCUT:
-# This defines the keyboard shortcut to be sent when you press the "user"
-# button in the headerbar. The shortcut string is a combination of maximum
-# 3 key names (listed below) separated with a '-' character.
-# Valid key names:
-# "alt", "bksl", "bksp", "ctrl", "del", "down", "end", "enter", "esc",
-# "f1", ... "f12", "home", "ins", "left", "menu", "minus", "pgdwn", "pgup",
-# "plus", "right", "shift", "space", "tab", "up", "win", "print" and "power".
-#
-# Example:
-# user_shortcut: keys=ctrl-alt-del
-#=======================================================================
-#user_shortcut: keys=ctrl-alt-del
-
-#=======================================================================
-# PCI:
-# This option controls the presence of a PCI chipset in Bochs. Currently it only
-# supports the i440FX chipset. You can also specify the devices connected to
-# PCI slots. Up to 5 slots are available. These devices are currently supported:
-# cirrus, e1000, es1370, ne2k, pcivga, pcidev, pcipnic, usb_ohci and usb_xhci.
-#
-# Example:
-# pci: enabled=1, chipset=i440fx, slot1=pcivga, slot2=ne2k
-#=======================================================================
-pci: enabled=1, chipset=i440fx, slot1=e1000
-
-#=======================================================================
-# USB_UHCI:
-# This option controls the presence of the USB root hub which is a part
-# of the i440FX PCI chipset. With the portX parameter you can connect devices
-# to the hub (currently supported: 'mouse', 'tablet', 'keypad', 'disk', 'cdrom'
-# 'hub' and 'printer'). NOTE: UHCI must be loaded with 'plugin_ctrl'.
-#
-# The optionsX parameter can be used to assign specific options to the device
-# connected to the corresponding USB port. Currently this feature is only used
-# to set the speed reported by device and by the 'disk' device to specify
-# an alternative redolog file of some image modes.
-#
-# If you connect the mouse or tablet to one of the ports, Bochs forwards the
-# mouse movement data to the USB device instead of the selected mouse type.
-# When connecting the keypad to one of the ports, Bochs forwards the input of
-# the numeric keypad to the USB device instead of the PS/2 keyboard.
-#
-# To connect a 'flat' mode image as an USB hardisk you can use the 'disk' device
-# with the path to the image separated with a colon. To use other disk image modes
-# similar to ATA disks the syntax 'disk:mode:filename' must be used (see below).
-#
-# To emulate an USB cdrom you can use the 'cdrom' device name and the path to
-# an ISO image or raw device name also separated with a colon. An option to
-# insert/eject media is available in the runtime configuration.
-#
-# The device name 'hub' connects an external hub with max. 8 ports (default: 4)
-# to the root hub. To specify the number of ports you have to add the value
-# separated with a colon. Connecting devices to the external hub ports is only
-# available in the runtime configuration.
-#
-# The device 'printer' emulates the HP Deskjet 920C printer. The PCL data is
-# sent to a file specified in bochsrc.txt. The current code appends the PCL
-# code to the file if the file already existed. It would probably be nice to
-# overwrite the file instead, asking user first.
-#=======================================================================
-#usb_uhci: enabled=1
-#usb_uhci: enabled=1, port1=mouse, port2=disk:usbstick.img
-#usb_uhci: enabled=1, port1=hub:7, port2=disk:growing:usbdisk.img
-#usb_uhci: enabled=1, port2=disk:undoable:usbdisk.img, options1=journal:redo.log
-#usb_uhci: enabled=1, port1=printer:printdata.bin, port2=cdrom:image.iso
-
-#=======================================================================
-# USB_OHCI:
-# This option controls the presence of the USB OHCI host controller with a
-# 2-port hub. The portX option accepts the same device types with the same
-# syntax as the UHCI controller (see above). The OHCI HC must be assigned to
-# a PCI slot and loaded with 'plugin_ctrl'.
-#=======================================================================
-#usb_ohci: enabled=1
-#usb_ohci: enabled=1, port1=printer:usbprinter.bin
-
-#=======================================================================
-# USB_XHCI:
-# This option controls the presence of the experimental USB xHCI host controller
-# with a 4-port hub. The portX option accepts the same device types with the
-# same syntax as the UHCI controller (see above). The xHCI HC must be assigned
-# to a PCI slot and loaded with 'plugin_ctrl'.
-#=======================================================================
-#usb_xhci: enabled=1
-
-#=======================================================================
-# CMOSIMAGE:
-# This defines image file that can be loaded into the CMOS RAM at startup.
-# The rtc_init parameter controls whether initialize the RTC with values stored
-# in the image. By default the time0 argument given to the clock option is used.
-# With 'rtc_init=image' the image is the source for the initial time.
-#
-# Example:
-# cmosimage: file=cmos.img, rtc_init=image
-#=======================================================================
-#cmosimage: file=cmos.img, rtc_init=time0
-
-#=======================================================================
-# MAGIC_BREAK:
-# This enables the "magic breakpoint" feature when using the debugger.
-# The useless cpu instruction XCHG BX, BX causes Bochs to enter the
-# debugger mode. This might be useful for software development.
-#
-# Example:
-# magic_break: enabled=1
-#=======================================================================
-#magic_break: enabled=1
-magic_break: enabled=1
-
-#=======================================================================
-# PORT_E9_HACK:
-# The 0xE9 port doesn't exists in normal ISA architecture. However, we
-# define a convention here, to display on the console of the system running
-# Bochs anything that is written to it. The idea is to provide debug output
-# very early when writing BIOS or OS code for example, without having to
-# bother with setting up a serial port or etc. Reading from port 0xE9 will
-# will return 0xe9 to let you know if the feature is available.
-# Leave this 0 unless you have a reason to use it.
-#
-# Example:
-# port_e9_hack: enabled=1
-#=======================================================================
-port_e9_hack: enabled=1
-
-#=======================================================================
-# DEBUG_SYMBOLS:
-# This loads symbols from the specified file for use in Bochs' internal
-# debugger. Symbols are loaded into global context. This is equivalent to
-# issuing ldsym debugger command at start up.
-#
-# Example:
-# debug_symbols: file="kernel.sym"
-# debug_symbols: file="kernel.sym", offset=0x80000000
-#=======================================================================
-#debug_symbols: file="kernel.sym"
-
-#=======================================================================
-# other stuff
-#=======================================================================
-#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log
-#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img
-#print_timestamps: enabled=1
-
-#-------------------------
-# PCI host device mapping
-#-------------------------
-#pcidev: vendor=0x1234, device=0x5678
-
-#=======================================================================
-# GDBSTUB:
-# Enable GDB stub. See user documentation for details.
-# Default value is enabled=0.
-#=======================================================================
-#gdbstub: enabled=0, port=1234, text_base=0, data_base=0, bss_base=0
-
-#=======================================================================
-# USER_PLUGIN:
-# Load user-defined plugin. This option is available only if Bochs is
-# compiled with plugin support. Maximum 8 different plugins are supported.
-# See the example in the Bochs sources how to write a plugin device.
-#=======================================================================
-#user_plugin: name=testdev
-
-#=======================================================================
-# for Macintosh, use the style of pathnames in the following
-# examples.
-#
-# vgaromimage: :bios:VGABIOS-elpin-2.40
-# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000
-# floppya: 1_44=[fd:], status=inserted
-#=======================================================================
-
-#=======================================================================
-# MEGS
-# Set the number of Megabytes of physical memory you want to emulate.
-# The default is 32MB, most OS's won't need more than that.
-# The maximum amount of memory supported is 2048Mb.
-# The 'MEGS' option is deprecated. Use 'MEMORY' option instead.
-#=======================================================================
-#megs: 256
-#megs: 128
-#megs: 64
-#megs: 32
-#megs: 16
-#megs: 8
diff --git a/qemu/roms/ipxe/contrib/vm/cow b/qemu/roms/ipxe/contrib/vm/cow
deleted file mode 100755
index 054ffdde9..000000000
--- a/qemu/roms/ipxe/contrib/vm/cow
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-
-set -e
-
-imgloop=
-tmpfile=
-tmploop=
-dmname=
-cowlink=
-
-function cleanup () {
- set +e
- [ -n "$cowlink" ] && rm $cowlink
- [ -n "$dmname" ] && dmsetup remove $dmname
- [ -n "$tmploop" ] && losetup -d $tmploop
- [ -n "$tmpfile" ] && rm $tmpfile
- [ -n "$imgloop" ] && losetup -d $imgloop
-}
-
-trap cleanup EXIT
-
-imgfile=$1 ; shift
-command=$1 ; shift
-if [ -z "$imgfile" -o -z "$command" ] ; then
- echo Syntax: $0 /path/to/image/file command [args..]
- exit 1
-fi
-
-# Set up image loop device
-x=`losetup -f` ; losetup -r $x $imgfile ; imgloop=$x
-
-# Create temporary file and set up temporary loop device
-tmpfile=`mktemp $imgfile.XXXXXXXXXX`
-truncate -r $imgfile $tmpfile
-x=`losetup -f` ; losetup $x $tmpfile ; tmploop=$x
-
-# Create snapshot device
-imgsize=`blockdev --getsz $imgloop`
-x=`basename $imgfile` ; echo 0 $imgsize snapshot $imgloop $tmploop N 16 | \
- dmsetup create $x ; dmname=$x
-chown --reference=$imgfile /dev/mapper/$dmname
-chmod --reference=$imgfile /dev/mapper/$dmname
-
-# Create symlink
-x=$imgfile.cow ; ln -s /dev/mapper/$dmname $x ; cowlink=$x
-
-# Wait until killed
-echo "Created $cowlink"
-$command "$@" $cowlink
diff --git a/qemu/roms/ipxe/contrib/vm/serial-console b/qemu/roms/ipxe/contrib/vm/serial-console
deleted file mode 100755
index 5d09876e3..000000000
--- a/qemu/roms/ipxe/contrib/vm/serial-console
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/usr/bin/perl -w
-
-=head1 NAME
-
-serial-console
-
-=head1 SYNOPSIS
-
-serial-console [options]
-
-Options:
-
- -h,--help Display brief help message
- -v,--verbose Increase verbosity
- -q,--quiet Decrease verbosity
- -l,--log FILE Log output to file
- -r,--rcfile FILE Modify specified bochsrc file
-
-=head1 DESCRIPTION
-
-C<serial-console> provides a virtual serial console for use with
-Bochs. Running C<serial-console> creates a pseudo-tty. The master
-side of this pty is made available to the user for interaction; the
-slave device is written to the Bochs configuration file
-(C<bochsrc.txt>) for use by a subsequent Bochs session.
-
-=head1 EXAMPLES
-
-=over 4
-
-=item C<serial-console>
-
-Create a virtual serial console for Bochs, modify C<bochsrc.txt>
-appropriately.
-
-=item C<serial-console -r ../.bochsrc -l serial.log>
-
-Create a virtual serial console for Bochs, modify C<../.bochsrc>
-appropriately, log output to C<serial.log>.
-
-=back
-
-=head1 INVOCATION
-
-Before starting Bochs, run C<serial-console> in a different session
-(e.g. a different xterm window). When you subsequently start Bochs,
-anything that the emulated machine writes to its serial port will
-appear in the window running C<serial-console>, and anything typed in
-the C<serial-console> window will arrive on the emulated machine's
-serial port.
-
-You do B<not> need to rerun C<serial-console> afresh for each Bochs
-session.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-l,--log FILE>
-
-Log all output (i.e. everything that is printed in the
-C<serial-console> window) to the specified file.
-
-=item B<-r,--rcfile FILE>
-
-Modify the specified bochsrc file. The file will be updated to
-contain the path to the slave side of the psuedo tty that we create.
-The original file will be restored when C<serial-console> exits. The
-default is to modify the file C<bochsrc.txt> in the current directory.
-
-To avoid modifying any bochsrc file, use C<--norcfile>.
-
-=back
-
-=cut
-
-use IO::Pty;
-use IO::Select;
-use File::Spec::Functions qw ( :ALL );
-use Getopt::Long;
-use Pod::Usage;
-use POSIX qw ( :termios_h );
-use strict;
-use warnings;
-
-my $o;
-my $restore_file = {};
-my $restore_termios;
-use constant BLOCKSIZE => 8192;
-
-##############################################################################
-#
-# Parse command line options into options hash ($o)
-#
-# $o = parse_opts();
-
-sub parse_opts {
- # $o is the hash that will hold the options
- my $o = {
- verbosity => 1,
- rcfile => 'bochsrc.txt',
- };
- # Special handlers for some options
- my $opt_handlers = {
- verbose => sub { $o->{verbosity}++; },
- quiet => sub { $o->{verbosity}--; },
- help => sub { pod2usage(1); },
- norcfile => sub { delete $o->{rcfile}; },
- };
- # Merge handlers into main options hash (so that Getopt::Long can find them)
- $o->{$_} = $opt_handlers->{$_} foreach keys %$opt_handlers;
- # Option specifiers for Getopt::Long
- my @optspec = ( 'help|h|?',
- 'quiet|q+',
- 'verbose|v+',
- 'log|l=s',
- 'rcfile|r=s',
- 'norcfile',
- );
- # Do option parsing
- Getopt::Long::Configure ( 'bundling' );
- pod2usage("Error parsing command-line options") unless GetOptions (
- $o, @optspec );
- # Clean up $o by removing the handlers
- delete $o->{$_} foreach keys %$opt_handlers;
- return $o;
-}
-
-##############################################################################
-#
-# Modify bochsrc file
-
-sub patch_bochsrc {
- my $active = shift;
- my $pty = shift;
-
- # Rename active file to backup file
- ( my $vol, my $dir, my $file ) = splitpath ( $active );
- $file = '.'.$file.".serial-console";
- my $backup = catpath ( $vol, $dir, $file );
- rename $active, $backup
- or die "Could not back up $active to $backup: $!\n";
-
- # Derive line to be inserted
- my $patch = "com1: enabled=1, mode=term, dev=$pty\n";
-
- # Modify file
- open my $old, "<$backup" or die "Could not open $backup: $!\n";
- open my $new, ">$active" or die "Could not open $active: $!\n";
- print $new <<"EOF";
-##################################################
-#
-# This file has been modified by serial-console.
-#
-# Do not modify this file; it will be erased when
-# serial-console (pid $$) exits and will be
-# replaced with the backup copy held in
-# $backup.
-#
-##################################################
-
-
-EOF
- my $patched;
- while ( my $line = <$old> ) {
- if ( $line =~ /^\s*\#?\s*com1:\s*\S/ ) {
- if ( ! $patched ) {
- $line = $patch;
- $patched = 1;
- } else {
- $line = '# '.$line unless $line =~ /^\s*\#/;
- }
- }
- print $new $line;
- }
- print $new $patch unless $patched;
- close $old;
- close $new;
-
- return $backup;
-}
-
-##############################################################################
-#
-# Attach/detach message printing and terminal settings
-
-sub bochs_attached {
- print STDERR "Bochs attached.\n\n\n"
- if $o->{verbosity} >= 1;
-}
-
-sub bochs_detached {
- print STDERR "\n\nWaiting for bochs to attach...\n"
- if $o->{verbosity} >= 1;
-}
-
-##############################################################################
-#
-# Main program
-
-$o = parse_opts();
-pod2usage(1) if @ARGV;
-
-# Catch signals
-my $sigdie = sub { die "Exiting via signal\n"; };
-$SIG{INT} = $sigdie;
-
-# Create Pty, close slave side
-my $pty = IO::Pty->new();
-$pty->close_slave();
-$pty->set_raw();
-print STDERR "Slave pty is ".$pty->ttyname."\n" if $o->{verbosity} >= 1;
-
-# Open logfile
-my $log;
-if ( $o->{log} ) {
- open $log, ">$o->{log}" or die "Could not open $o->{log}: $!\n";
-}
-
-# Set up terminal
-my $termios;
-if ( -t STDIN ) {
- $termios = POSIX::Termios->new;
- $restore_termios = POSIX::Termios->new;
- $termios->getattr ( fileno(STDIN) );
- $restore_termios->getattr ( fileno(STDIN) );
- $termios->setlflag ( $termios->getlflag & ~(ICANON) & ~(ECHO) );
- $termios->setiflag ( $termios->getiflag & ~(ICRNL) );
- $termios->setattr ( fileno(STDIN), TCSANOW );
-}
-
-# Modify bochsrc file
-$restore_file = { $o->{rcfile} =>
- patch_bochsrc ( $o->{rcfile}, $pty->ttyname ) }
- if $o->{rcfile};
-
-# Start character shunt
-my $attached = 1;
-my $select = IO::Select->new ( \*STDIN, $pty );
-while ( 1 ) {
- my %can_read = map { $_ => 1 }
- $select->can_read ( $attached ? undef : 1 );
- if ( $can_read{\*STDIN} ) {
- sysread ( STDIN, my $data, BLOCKSIZE )
- or die "Cannot read from STDIN: $!\n";
- $pty->syswrite ( $data );
- }
- if ( $can_read{$pty} ) {
- if ( $pty->sysread ( my $data, BLOCKSIZE ) ) {
- # Actual data available
- bochs_attached() if $attached == 0;
- $attached = 1;
- syswrite ( STDOUT, $data );
- $log->syswrite ( $data ) if $log;
- } else {
- # No data available but select() says we can read. This almost
- # certainly indicates that nothing is attached to the slave.
- bochs_detached() if $attached == 1;
- $attached = 0;
- sleep ( 1 );
- }
- } else {
- bochs_attached() if $attached == 0;
- $attached = 1;
- }
-}
-
-END {
- # Restore bochsrc file if applicable
- if ( ( my $orig_file, my $backup_file ) = %$restore_file ) {
- unlink $orig_file;
- rename $backup_file, $orig_file;
- }
- # Restore terminal settings if applicable
- if ( $restore_termios ) {
- $restore_termios->setattr ( fileno(STDIN), TCSANOW );
- }
-}