Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 120 insertions, 0 deletions

diff --git a/qemu/roms/SLOF/slof/fs/xmodem.fs b/qemu/roms/SLOF/slof/fs/xmodem.fs
new file mode 100644
index 000000000..122192212
--- /dev/null
+++ b/qemu/roms/SLOF/slof/fs/xmodem.fs
@@ -0,0 +1,120 @@
+\ *****************************************************************************
+\ * Copyright (c) 2004, 2008 IBM Corporation
+\ * All rights reserved.
+\ * This program and the accompanying materials
+\ * are made available under the terms of the BSD License
+\ * which accompanies this distribution, and is available at
+\ * http://www.opensource.org/licenses/bsd-license.php
+\ *
+\ * Contributors:
+\ *     IBM Corporation - initial implementation
+\ ****************************************************************************/
+
+
+01 CONSTANT XM-SOH   \ Start of header
+04 CONSTANT XM-EOT   \ End-of-transmission
+06 CONSTANT XM-ACK   \ Acknowledge
+15 CONSTANT XM-NAK   \ Neg. acknowledge
+
+0 VALUE xm-retries   \ Retry count
+0 VALUE xm-block#
+
+
+\ *
+\ * Internal function:
+\ * wait <timeout> seconds for a new character
+\ *
+: xmodem-get-byte  ( timeout -- byte|-1 )
+   d# 1000 *
+   0 DO
+      key? IF key UNLOOP EXIT THEN
+      1 ms
+   LOOP
+   -1
+;
+
+
+\ *
+\ * Internal function:
+\ * Receive one XMODEM packet, check block number and check sum.
+\ *
+: xmodem-rx-packet  ( address -- success? )
+   1 xmodem-get-byte    \ Get block number
+   dup 0 < IF
+      2drop false EXIT  \ Timeout
+   THEN
+   1 xmodem-get-byte    \ Get neg. block number
+   dup 0 < IF
+      3drop false EXIT  \ Timeout
+   THEN
+   rot 0                ( blk# ~blk# address chksum )
+   80 0 DO
+      1 xmodem-get-byte dup 0 < IF     ( blk# ~blk# address chksum byte )
+         3drop 2drop UNLOOP FALSE EXIT
+      THEN
+      dup 3 pick c!            ( blk# ~blk# address chksum byte )
+      + swap 1+ swap           ( blk# ~blk# address+1 chksum' )
+   LOOP
+   ( blk# ~blk# address chksum )
+   \ Check sum:
+   0ff and
+   1 xmodem-get-byte <> IF
+      \ CRC failed!
+      3drop FALSE EXIT
+   THEN
+   drop                        ( blk# ~blk# )
+   \ finally check if block numbers are ok:
+   over xm-block# <> IF
+      \ Wrong block number!
+      2drop FALSE EXIT
+   THEN                        ( blk# ~blk# )
+   ff xor =
+;
+
+
+\ *
+\ * Internal function:
+\ * Load file to given address via XMODEM protocol
+\ *
+: (xmodem-load)  ( address -- bytes )
+   1 to xm-block#
+   0 to xm-retries
+   dup
+   BEGIN
+      d# 10 xmodem-get-byte dup >r
+      CASE
+         XM-SOH OF
+            dup xmodem-rx-packet IF
+               \ A packet has been received successfully
+               XM-ACK emit
+               80 +                     ( start-addr next-addr  R: rx-byte )
+               0 to xm-retries                    \ Reset retry count
+               xm-block# 1+ ff and to xm-block#   \ Increase current block#
+            ELSE
+               \ Error while receiving packet
+               XM-NAK emit
+               xm-retries 1+ to xm-retries  \ Increase retry count
+            THEN
+         ENDOF
+         XM-EOT OF
+            XM-ACK emit
+         ENDOF
+         dup OF
+            XM-NAK emit
+            xm-retries 1+ to xm-retries  \ Increase retry count
+         ENDOF
+      ENDCASE
+      r> XM-EOT =
+      xm-retries d# 10 >= OR
+   UNTIL                         ( start-address end-address )
+   swap -                        ( bytes received )
+;
+
+
+\ *
+\ * Load file to load-base via XMODEM protocol
+\ *
+: xmodem-load  ( -- bytes )
+   cr ." Waiting for start of XMODEM upload..." cr
+   get-load-base (xmodem-load)
+;