diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/roms/SLOF/slof/fs/packages/disk-label.fs | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/roms/SLOF/slof/fs/packages/disk-label.fs')
-rw-r--r-- | qemu/roms/SLOF/slof/fs/packages/disk-label.fs | 660 |
1 files changed, 660 insertions, 0 deletions
diff --git a/qemu/roms/SLOF/slof/fs/packages/disk-label.fs b/qemu/roms/SLOF/slof/fs/packages/disk-label.fs new file mode 100644 index 000000000..fe1c25e7a --- /dev/null +++ b/qemu/roms/SLOF/slof/fs/packages/disk-label.fs @@ -0,0 +1,660 @@ +\ ***************************************************************************** +\ * Copyright (c) 2004, 2008 IBM Corporation +\ * All rights reserved. +\ * This program and the accompanying materials +\ * are made available under the terms of the BSD License +\ * which accompanies this distribution, and is available at +\ * http://www.opensource.org/licenses/bsd-license.php +\ * +\ * Contributors: +\ * IBM Corporation - initial implementation +\ ****************************************************************************/ + + +\ Set debug-disk-label? to true to get debug messages for the disk-label code. +false VALUE debug-disk-label? + +\ This value defines the maximum number of blocks (512b) to load from a PREP +\ partition. This is required to keep the load time in reasonable limits if the +\ PREP partition becomes big. +\ If we ever want to put a large kernel with initramfs from a PREP partition +\ we might need to increase this value. The default value is 65536 blocks (32MB) +d# 65536 value max-prep-partition-blocks + +s" disk-label" device-name + +0 INSTANCE VALUE partition +0 INSTANCE VALUE part-offset +0 INSTANCE VALUE disk-chrp-boot + +0 INSTANCE VALUE part-start +0 INSTANCE VALUE lpart-start +0 INSTANCE VALUE part-size +0 INSTANCE VALUE dos-logical-partitions + +0 INSTANCE VALUE block-size +0 INSTANCE VALUE block + +0 INSTANCE VALUE args +0 INSTANCE VALUE args-len + +0 INSTANCE VALUE gpt-part-size +0 INSTANCE VALUE seek-pos + + +INSTANCE VARIABLE block# \ variable to store logical sector# +INSTANCE VARIABLE hit# \ partition counter +INSTANCE VARIABLE success-flag + +\ ISO9660 specific information +0ff constant END-OF-DESC +3 constant PARTITION-ID +48 constant VOL-PART-LOC + + +\ DOS partition label (MBR) specific structures + +STRUCT + 1b8 field mbr>boot-loader + /l field mbr>disk-signature + /w field mbr>null + 40 field mbr>partition-table + /w field mbr>magic + +CONSTANT /mbr + +STRUCT + /c field part-entry>active + /c field part-entry>start-head + /c field part-entry>start-sect + /c field part-entry>start-cyl + /c field part-entry>id + /c field part-entry>end-head + /c field part-entry>end-sect + /c field part-entry>end-cyl + /l field part-entry>sector-offset + /l field part-entry>sector-count + +CONSTANT /partition-entry + +STRUCT + 8 field gpt>signature + 4 field gpt>revision + 4 field gpt>header-size + 4 field gpt>header-crc32 + 4 field gpt>reserved + 8 field gpt>current-lba + 8 field gpt>backup-lba + 8 field gpt>first-lba + 8 field gpt>last-lba + 10 field gpt>disk-guid + 8 field gpt>part-entry-lba + 4 field gpt>num-part-entry + 4 field gpt>part-entry-size + 4 field gpt>part-array-crc32 + 1a4 field gpt>reserved + +CONSTANT /gpt-header + +STRUCT + 10 field gpt-part-entry>part-type-guid + 10 field gpt-part-entry>part-guid + 8 field gpt-part-entry>first-lba + 8 field gpt-part-entry>last-lba + 8 field gpt-part-entry>attribute + 48 field gpt-part-entry>part-name + +CONSTANT /gpt-part-entry + +\ Defined by IEEE 1275-1994 (3.8.1) + +: offset ( d.rel -- d.abs ) + part-offset xlsplit d+ +; + +: seek ( pos.lo pos.hi -- status ) + offset + debug-disk-label? IF 2dup ." seek-parent: pos.hi=0x" u. ." pos.lo=0x" u. THEN + s" seek" $call-parent + debug-disk-label? IF dup ." status=" . cr THEN +; + +: read ( addr len -- actual ) + debug-disk-label? IF 2dup swap ." read-parent: addr=0x" u. ." len=" .d THEN + s" read" $call-parent + debug-disk-label? IF dup ." actual=" .d cr THEN +; + + +\ read sector to array "block" +: read-sector ( sector-number -- ) + \ block-size is 0x200 on disks, 0x800 on cdrom drives + block-size * 0 seek drop \ seek to sector + block block-size read drop \ read sector +; + +: (.part-entry) ( part-entry ) + cr ." part-entry>active: " dup part-entry>active c@ .d + cr ." part-entry>start-head: " dup part-entry>start-head c@ .d + cr ." part-entry>start-sect: " dup part-entry>start-sect c@ .d + cr ." part-entry>start-cyl: " dup part-entry>start-cyl c@ .d + cr ." part-entry>id: " dup part-entry>id c@ .d + cr ." part-entry>end-head: " dup part-entry>end-head c@ .d + cr ." part-entry>end-sect: " dup part-entry>end-sect c@ .d + cr ." part-entry>end-cyl: " dup part-entry>end-cyl c@ .d + cr ." part-entry>sector-offset: " dup part-entry>sector-offset l@-le .d + cr ." part-entry>sector-count: " dup part-entry>sector-count l@-le .d + cr +; + +: (.name) r@ begin cell - dup @ <colon> = UNTIL xt>name cr type space ; + +: init-block ( -- ) + s" block-size" ['] $call-parent CATCH IF ABORT" parent has no block-size." THEN + to block-size + d# 4096 alloc-mem + dup d# 4096 erase + to block + debug-disk-label? IF + ." init-block: block-size=" block-size .d ." block=0x" block u. cr + THEN +; + +: partition>part-entry ( partition -- part-entry ) + 1- /partition-entry * block mbr>partition-table + +; + +: partition>start-sector ( partition -- sector-offset ) + partition>part-entry part-entry>sector-offset l@-le +; + +\ This word returns true if the currently loaded block has _NO_ MBR magic +: no-mbr? ( -- true|false ) + 0 read-sector + 1 partition>part-entry part-entry>id c@ ee = IF TRUE EXIT THEN \ GPT partition found + block mbr>magic w@-le aa55 <> +; + +\ This word returns true if the currently loaded block has _NO_ GPT partition id +: no-gpt? ( -- true|false ) + 0 read-sector + 1 partition>part-entry part-entry>id c@ ee <> +; + +: pc-extended-partition? ( part-entry-addr -- true|false ) + part-entry>id c@ ( id ) + dup 5 = swap ( true|false id ) + dup f = swap ( true|false true|false id ) + 85 = ( true|false true|false true|false ) + or or ( true|false ) +; + +: count-dos-logical-partitions ( -- #logical-partitions ) + no-mbr? IF 0 EXIT THEN + 0 5 1 DO ( current ) + i partition>part-entry ( current part-entry ) + dup pc-extended-partition? IF + part-entry>sector-offset l@-le ( current sector ) + dup to part-start to lpart-start ( current ) + BEGIN + part-start read-sector \ read EBR + 1 partition>start-sector IF + \ ." Logical Partition found at " part-start .d cr + 1+ + THEN \ another logical partition + 2 partition>start-sector + ( current relative-sector ) + ?dup IF lpart-start + to part-start false ELSE true THEN + UNTIL + ELSE + drop + THEN + LOOP +; + +: (get-dos-partition-params) ( ext-part-start part-entry -- offset count active? id ) + dup part-entry>sector-offset l@-le rot + swap ( offset part-entry ) + dup part-entry>sector-count l@-le swap ( offset count part-entry ) + dup part-entry>active c@ 80 = swap ( offset count active? part-entry ) + part-entry>id c@ ( offset count active? id ) +; + +: find-dos-partition ( partition# -- false | offset count active? id true ) + to partition 0 to part-start 0 to part-offset + + \ no negative partitions + partition 0<= IF 0 to partition false EXIT THEN + + \ load MBR and check it + no-mbr? IF 0 to partition false EXIT THEN + + partition 4 <= IF \ Is this a primary partition? + 0 partition partition>part-entry + (get-dos-partition-params) + \ FIXME sanity checks? + true EXIT + ELSE + partition 4 - 0 5 1 DO ( logical-partition current ) + i partition>part-entry ( log-part current part-entry ) + dup pc-extended-partition? IF + part-entry>sector-offset l@-le ( log-part current sector ) + dup to part-start to lpart-start ( log-part current ) + BEGIN + part-start read-sector \ read EBR + 1 partition>start-sector IF \ first partition entry + 1+ 2dup = IF ( log-part current ) + 2drop + part-start 1 partition>part-entry + (get-dos-partition-params) + true UNLOOP EXIT + THEN + 2 partition>start-sector + ( log-part current relative-sector ) + + ?dup IF lpart-start + to part-start false ELSE true THEN + ELSE + true + THEN + UNTIL + ELSE + drop + THEN + LOOP + 2drop false + THEN +; + +: try-dos-partition ( -- okay? ) + \ Read partition table and check magic. + no-mbr? IF cr ." No DOS disk-label found." cr false EXIT THEN + + count-dos-logical-partitions TO dos-logical-partitions + + debug-disk-label? IF + ." Found " dos-logical-partitions .d ." logical partitions" cr + ." Partition = " partition .d cr + THEN + + partition 1 5 dos-logical-partitions + + within 0= IF + cr ." Partition # not 1-" 4 dos-logical-partitions + . cr false EXIT + THEN + + \ Could/should check for valid partition here... the magic is not enough really. + + \ Get the partition offset. + + partition find-dos-partition IF + ( offset count active? id ) + 2drop + to part-size + block-size * to part-offset + true + ELSE + false + THEN +; + +\ Check for an ISO-9660 filesystem on the disk +\ : try-iso9660-partition ( -- true|false ) +\ implement me if you can ;-) +\ ; + + +\ Check for an ISO-9660 filesystem on the disk +\ (cf. CHRP IEEE 1275 spec., chapter 11.1.2.3) +: has-iso9660-filesystem ( -- TRUE|FALSE ) + \ Seek to the beginning of logical 2048-byte sector 16 + \ refer to Chapter C.11.1 in PAPR 2.0 Spec + \ was: 10 read-sector, but this might cause trouble if you + \ try booting an ISO image from a device with 512b sectors. + 10 800 * 0 seek drop \ seek to sector + block 800 read drop \ read sector + \ Check for CD-ROM volume magic: + block c@ 1 = + block 1+ 5 s" CD001" str= + and + dup IF 800 to block-size THEN +; + + +\ Load from first active DOS boot partition. + +\ NOTE: block-size is always 512 bytes for DOS partition tables. + +: load-from-dos-boot-partition ( addr -- size ) + no-mbr? IF drop FALSE EXIT THEN \ read MBR and check for DOS disk-label magic + + count-dos-logical-partitions TO dos-logical-partitions + + debug-disk-label? IF + ." Found " dos-logical-partitions .d ." logical partitions" cr + ." Partition = " partition .d cr + THEN + + \ Now walk through the partitions: + 5 dos-logical-partitions + 1 DO + \ ." checking partition " i . + i find-dos-partition IF ( addr offset count active? id ) + 41 = and ( addr offset count prep-boot-part? ) + IF ( addr offset count ) + max-prep-partition-blocks min \ reduce load size + swap ( addr count offset ) + block-size * to part-offset + 0 0 seek drop ( addr offset ) + block-size * read ( size ) + UNLOOP EXIT + ELSE + 2drop ( addr ) + THEN + THEN + LOOP + drop 0 +; + +\ Check for GPT PReP partition GUID +9E1A2D38 CONSTANT GPT-PREP-PARTITION-1 +C612 CONSTANT GPT-PREP-PARTITION-2 +4316 CONSTANT GPT-PREP-PARTITION-3 +AA26 CONSTANT GPT-PREP-PARTITION-4 +8B49521E5A8B CONSTANT GPT-PREP-PARTITION-5 + +: gpt-prep-partition? ( -- true|false ) + block gpt-part-entry>part-type-guid l@-le GPT-PREP-PARTITION-1 = IF + block gpt-part-entry>part-type-guid 4 + w@-le + GPT-PREP-PARTITION-2 = IF + block gpt-part-entry>part-type-guid 6 + w@-le + GPT-PREP-PARTITION-3 = IF + block gpt-part-entry>part-type-guid 8 + w@ + GPT-PREP-PARTITION-4 = IF + block gpt-part-entry>part-type-guid a + w@ + block gpt-part-entry>part-type-guid c + l@ swap lxjoin + GPT-PREP-PARTITION-5 = IF + TRUE EXIT + THEN + THEN + THEN + THEN + THEN + FALSE +; + +: load-from-gpt-prep-partition ( addr -- size ) + no-gpt? IF drop FALSE EXIT THEN + debug-disk-label? IF + cr ." GPT partition found " cr + THEN + 1 read-sector block gpt>part-entry-lba l@-le + block-size * to seek-pos + block gpt>part-entry-size l@-le to gpt-part-size + block gpt>num-part-entry l@-le dup 0= IF FALSE EXIT THEN + 1+ 1 ?DO + seek-pos 0 seek drop + block gpt-part-size read drop gpt-prep-partition? IF + debug-disk-label? IF + ." GPT PReP partition found " cr + THEN + block gpt-part-entry>first-lba x@ xbflip + block gpt-part-entry>last-lba x@ xbflip + over - 1+ ( addr offset len ) + swap ( addr len offset ) + block-size * to part-offset + 0 0 seek drop ( addr len ) + block-size * read ( size ) + UNLOOP EXIT + THEN + seek-pos gpt-part-size i * + to seek-pos + LOOP + FALSE +; + +\ Extract the boot loader path from a bootinfo.txt file +\ In: address and length of buffer where the bootinfo.txt has been loaded to. +\ Out: string address and length of the boot loader (within the input buffer) +\ or a string with length = 0 when parsing failed. + +\ Here is a sample bootinfo file: +\ <chrp-boot> +\ <description>Linux Distribution</description> +\ <os-name>Linux</os-name> +\ <boot-script>boot &device;:1,\boot\yaboot.ibm</boot-script> +\ <icon size=64,64 color-space=3,3,2> +\ <bitmap>[..]</bitmap> +\ </icon> +\ </chrp-boot> + +: parse-bootinfo-txt ( addr len -- str len ) + 2dup s" <boot-script>" find-substr ( addr len pos1 ) + 2dup = IF + \ String not found + 3drop 0 0 EXIT + THEN + dup >r - swap r> + swap ( addr1 len1 ) + + 2dup s" &device;:" find-substr ( addr1 len1 posdev ) + 2dup = IF + 3drop 0 0 EXIT + THEN + 9 + \ Skip the "&device;:" string + dup >r - swap r> + swap ( addr2 len2 ) + 2dup s" </boot-script>" find-substr nip ( addr2 len3 ) + + debug-disk-label? IF + ." Extracted boot loader from bootinfo.txt: '" + 2dup type ." '" cr + THEN +; + +\ Try to load \ppc\bootinfo.txt from the disk (used mainly on CD-ROMs), and if +\ available, get the boot loader path from this file and load it. +\ See the "CHRP system binding to IEEE 1275" specification for more information +\ about bootinfo.txt. An example file can be found in the comment of +\ parse-bootinfo-txt ( addr len -- str len ) + +: load-chrp-boot-file ( addr -- size ) + \ Create bootinfo.txt path name and load that file: + my-parent instance>path + disk-chrp-boot @ 1 = IF + s" :1,\ppc\bootinfo.txt" $cat strdup ( addr str len ) + ELSE + s" :\ppc\bootinfo.txt" $cat strdup ( addr str len ) + THEN + open-dev dup 0= IF 2drop 0 EXIT THEN + >r dup ( addr addr R:ihandle ) + dup s" load" r@ $call-method ( addr addr size R:ihandle ) + r> close-dev ( addr addr size ) + + \ Now parse the information from bootinfo.txt: + parse-bootinfo-txt ( addr fnstr fnlen ) + dup 0= IF 3drop 0 EXIT THEN + \ Does the string contain parameters (i.e. a white space)? + 2dup 20 findchar IF + ( addr fnstr fnlen offset ) + >r 2dup r@ - 1- swap r@ + 1+ swap ( addr fnstr fnlen pstr plen R: offset ) + encode-string s" bootargs" set-chosen + drop r> + THEN + + \ Create the full path to the boot loader: + my-parent instance>path ( addr fnstr fnlen nstr nlen ) + s" :" $cat 2swap $cat strdup ( addr str len ) + \ Update the bootpath: + 2dup encode-string s" bootpath" set-chosen + \ And finally load the boot loader itself: + open-dev dup 0= IF ." failed to load CHRP boot loader." 2drop 0 EXIT THEN + >r s" load" r@ $call-method ( size R:ihandle ) + r> close-dev ( size ) +; + +\ load from a bootable partition +: load-from-boot-partition ( addr -- size ) + debug-disk-label? IF ." Trying DOS boot " .s cr THEN + dup load-from-dos-boot-partition ?dup 0 <> IF nip EXIT THEN + + debug-disk-label? IF ." Trying CHRP boot " .s cr THEN + 1 disk-chrp-boot ! + dup load-chrp-boot-file ?dup 0 <> IF .s cr nip EXIT THEN + 0 disk-chrp-boot ! + + debug-disk-label? IF ." Trying GPT boot " .s cr THEN + load-from-gpt-prep-partition + \ More boot partition formats ... +; + +\ parse partition number from my-args + +\ my-args has the following format +\ [<partition>[,<path>]] + +\ | example my-args | example boot command | +\ +------------------+---------------------------+ +\ | 1,\boot\vmlinuz | boot disk:1,\boot\vmlinuz | +\ | 2 | boot disk:2 | + +\ 0 means the whole disk, this is the same behavior +\ as if no partition is specified (yaboot wants this). + +: parse-partition ( -- okay? ) + 0 to partition + 0 to part-offset + 0 to part-size + + my-args to args-len to args + + debug-disk-label? IF + cr ." disk-label parse-partition: my-args=" my-args type cr + THEN + + \ Called without arguments? + args-len 0 = IF true EXIT THEN + + \ Check for "full disk" arguments. + my-args [char] , findchar 0= IF \ no comma? + args c@ isdigit not IF \ ... and not a partition number? + true EXIT \ ... then it's not a partition we can parse + THEN + ELSE + drop + THEN + my-args [char] , split to args-len to args + dup 0= IF 2drop true EXIT THEN \ no first argument + + \ Check partition #. + base @ >r decimal $number r> base ! + IF cr ." Not a partition #" false EXIT THEN + + \ Store part #, done. + to partition + true +; + + +\ try-files and try-partitions + +: (interpose-filesystem) ( str len -- ) + find-package IF args args-len rot interpose THEN +; + +: try-dos-files ( -- found? ) + no-mbr? IF false EXIT THEN + + \ block 0 byte 0-2 is a jump instruction in all FAT + \ filesystems. + \ e9 and eb are jump instructions in x86 assembler. + block c@ e9 <> IF + block c@ eb <> + block 2+ c@ 90 <> or + IF false EXIT THEN + THEN + s" fat-files" (interpose-filesystem) + true +; + +: try-ext2-files ( -- found? ) + 2 read-sector \ read first superblock + block d# 56 + w@-le \ fetch s_magic + ef53 <> IF false EXIT THEN \ s_magic found? + s" ext2-files" (interpose-filesystem) + true +; + + +: try-iso9660-files + has-iso9660-filesystem 0= IF false exit THEN + s" iso-9660" (interpose-filesystem) + true +; + +: try-files ( -- found? ) + \ If no path, then full disk. + args-len 0= IF true EXIT THEN + + try-dos-files IF true EXIT THEN + try-ext2-files IF true EXIT THEN + try-iso9660-files IF true EXIT THEN + + \ ... more filesystem types here ... + + false +; + +: try-partitions ( -- found? ) + try-dos-partition IF try-files EXIT THEN + \ try-iso9660-partition IF try-files EXIT THEN + \ ... more partition types here... + false +; + +\ Interface functions for disk-label package +\ as defined by IEEE 1275-1994 3.8.1 + +: close ( -- ) + debug-disk-label? IF ." Closing disk-label: block=0x" block u. ." block-size=" block-size .d cr THEN + block d# 4096 free-mem +; + + +: open ( -- true|false ) + init-block + + parse-partition 0= IF + close + false EXIT + THEN + + partition IF + try-partitions + ELSE + try-files + THEN + dup 0= IF debug-disk-label? IF ." not found." cr THEN close THEN \ free memory again +; + + +\ Boot & Load w/o arguments is assumed to be boot from boot partition + +: load ( addr -- size ) + debug-disk-label? IF + ." load: " dup u. cr + THEN + + args-len IF + TRUE ABORT" Load done w/o filesystem" + ELSE + partition IF + 0 0 seek drop + part-size IF + part-size max-prep-partition-blocks min \ Load size + ELSE + max-prep-partition-blocks + THEN + 200 * read + ELSE + has-iso9660-filesystem IF + dup load-chrp-boot-file ?dup 0 > IF nip EXIT THEN + THEN + load-from-boot-partition + dup 0= ABORT" No boot partition found" + THEN + THEN +; |