Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 219 deletions

diff --git a/qemu/roms/SLOF/slof/entry.S b/qemu/roms/SLOF/slof/entry.S
deleted file mode 100644
index 5372de357..000000000
--- a/qemu/roms/SLOF/slof/entry.S
+++ /dev/null
@@ -1,219 +0,0 @@
-/******************************************************************************
- * Copyright (c) 2004, 2008 IBM Corporation
- * All rights reserved.
- * This program and the accompanying materials
- * are made available under the terms of the BSD License
- * which accompanies this distribution, and is available at
- * http://www.opensource.org/licenses/bsd-license.php
- *
- * Contributors:
- *     IBM Corporation - initial implementation
- *****************************************************************************/
-
-#include <macros.h>
-
-#define STACKSIZE 0x2000
-
-	#
-	# The generic exception code.
-	#
-	# Enter with GPR0 = vector, SPRG0 = saved GPR0
-	#
-
-	.section ".entry_text"
-
-the_handler:
-	.quad	handler
-
-eregs:
-	/* the_exception_frame is a C variable which is usually
-	 * defined in $(TARG).c
-	 * the_exception_frame can be accessed from paflof through
-	 * the word eregs
-	 * in the case an excpetion is handled paflof will read
-	 * from eregs the values of all registers and print them
-	 * out in the exception handler */
-	.quad	the_exception_frame
-
-handler:
-	mtsprg 1,1	# SPRG1 = saved GPR1
-	bcl 20,31,$+4
-	mflr 1
-	ld 1,eregs-$+4(1)	# GPR1 = address of register save area
-
-	.irp i, 2,3,4,5,6,7,8,9,10,11,12,13,14,15, \
-		16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
-	std \i,\i*8(1)
-	.endr		# save GPR2..GPR31
-
-	li r3, 3        // GPR3 = mode (param_1, param_2)
-	mr 4,0		// GPR4 = vector
-
-	mfsprg 0,0
-	std 0,0(1)	# save GPR0
-	mfsprg 0,1
-	std 0,8(1)	# save GPR1
-
-	cmpwi	r4, 0x900	# Decrementer interrupt
-	bne	0f
-	mfdec	r5		# Save old value of decrementer as reason
-	lis	r0,0x7fff	# Set decrementer to highest value 
-	mtdec	r0
-0:
-	mfcr 0
-	std 0,0x100(1)
-	mfxer 0
-	std 0,0x108(1)
-	mfsprg 0,3	# save lr	
-	std 0,0x110(1)
-	mfsprg 0,2	# save ctr	
-	std 0,0x118(1)
-	mfsrr0 0
-	std 0,0x120(1)
-	mfsrr1 0
-	std 0,0x128(1)
-	mfdar 0
-	std 0,0x130(1)
-	mfdsisr 0
-	std 0,0x138(1)	# save special regs
-
-	bcl	20, 31, over
-base:
-	.align	3
-.the_system_stack:
-	.quad   the_system_stack+STACKSIZE-base
-over:
-	mflr	r2				/* gpr 2 is the base */
-	ld	r1, .the_system_stack-base(r2)	/* load stack pointer */
-	add	r1, r1, r2			/* add base */
-	li	r0, 0
-	stdu	r0, -0x10(r1)
-	stdu	r1, -0x100(r1)
-
-	lis 2,engine@ha
-	ld 0,engine@l(2) # set up entry
-	mtsrr0	0
-		
-	ld 2,8+engine@l(2) # set up TOC pointer
-
-	rfid
-#	b .engine	# ...and run!
-
-
-
-	#
-	# Swap non-volatile client interface regs, plus GPR3..GPR7.
-	#
-
-swap_ci_regs:
-	/* save lr */
-	mflr	r0
-	/* let's find out where our client stack is */
-	bcl	20, 31, client_over
-client_base:
-	.align	3
-.the_client_frame:
-	.quad   the_client_frame-client_base
-client_over:
-	mflr	r8				/* gpr 2 is the client_base */
-	mtlr	r0				/* restore the original lr */
-	ld	r0, .the_client_frame-client_base(r8)
-	add	r8, r0, r8			/* add the client_base */
-	/* r8 now contains the address of the_client_frame */
-
-	.irp i, 1,2,3,4,5,6,7, \
-		13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
-	ld 0,\i*8(8)
-	std \i,\i*8(8)
-	mr \i,0
-	.endr		# swap GPR1..7, GPR13..31
-
-	ld 0,0x100(8)
-	mfcr 9
-	mtcrf 0xff,0
-	std 9,0x100(8)	# swap CR
-
-	ld 0,0x128(8)
-	mfmsr 9
-	mtmsrd 0
-	sync
-	isync
-	std 9,0x128(8)	# swap MSR
-
-	blr
-
-	#
-	# Entry point for the OF client interface.
-	#
-
-        .globl client_entry_point
-        .section        ".opd","aw"
-        .align 3
-client_entry_point:
-        .quad   .client_entry_point,.TOC.@tocbase,0
-        .previous
-        .type   .client_entry_point,@function
-        .globl  .client_entry_point
-.client_entry_point:
-	mflr 4
-	bl swap_ci_regs	# swap regs
-	mtlr 4
-	li 3, 0 # client call
-	blr	
-
-	#
-	# Start the client.
-	#
-
-        .globl call_client
-        .section        ".opd","aw"
-        .align 3
-call_client:
-        .quad   .call_client,.TOC.@tocbase,0
-        .previous
-        .type   .call_client,@function
-        .globl  .call_client
-
-.call_client:	# called with r3 = address, returns r3
-	mflr 4
-	mtctr 3
-	bl swap_ci_regs
-	/* Check if LE loading */
-	cmpwi 0,13,1
-	beq 0f
-	bctrl
-	b 1f
-0:	/* handle LE */
-	mfmsr 13
-	xori  13,13,1
-	mtsrr1 13
-	mfctr 13
-	mr 12,13
-	mtsrr0 13
-	rfid
-#if 0 /* in case we return back, still to be tested */
-	.long 0x05009f42; /* bcl 20,31,$+4   */
-	.long 0xa602c87d; /* mflr r14    */
-	.long 0x1c00ce39; /* addi r14,r14,28   */
-	.long 0xa600e07d; /* mfmsr r15    */
-	.long 0x0100ef69; /* xori r15,r15,1   */
-	.long 0xa603da7d; /* mtsrr0 r14    */
-	.long 0xa603fb7d; /* mtsrr1 r15    */
-	.long 0x2400004c; /* rfid */
-#endif
-1:
-	bl swap_ci_regs
-	mtlr 4
-	li 3, -1 # client app return
-	blr
-
-
-	# Call another function via pointer in r6
-	# (arguments can be provided in r3 to r5)
-	# Destination function should jump back to lr
-C_ENTRY(call_c)
-	mtctr	r6
-	bctr
-
-.global the_system_stack
-	.lcomm	the_system_stack, STACKSIZE, 16