Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 59 insertions, 0 deletions

diff --git a/qemu/roms/SLOF/board-js2x/slof/rtc.fs b/qemu/roms/SLOF/board-js2x/slof/rtc.fs
new file mode 100644
index 000000000..861b3f9ff
--- /dev/null
+++ b/qemu/roms/SLOF/board-js2x/slof/rtc.fs
@@ -0,0 +1,59 @@
+\ *****************************************************************************
+\ * Copyright (c) 2004, 2008 IBM Corporation
+\ * All rights reserved.
+\ * This program and the accompanying materials
+\ * are made available under the terms of the BSD License
+\ * which accompanies this distribution, and is available at
+\ * http://www.opensource.org/licenses/bsd-license.php
+\ *
+\ * Contributors:
+\ *     IBM Corporation - initial implementation
+\ ****************************************************************************/
+
+\ National Semiconductor SIO.
+\ See http://www.national.com/pf/PC/PC87417.html for the datasheet.
+\ PC87417.pdf
+\ moved the RTC initialisation from the device tree to a much earlier point
+\ so that the RTC can be accessed before device tree is generated
+
+\ Enable the RTC, set its address at 1070
+\ see PC87417.pdf page 39 (chapter 3.2.3)
+10 7 siocfg!
+1 30 siocfg!
+1070 wbsplit nip dup 60 siocfg! 62 siocfg!
+
+: rtc@  ( offset -- value )
+   1070 io-c! 1071 io-c@
+;
+
+: rtc!  ( value offset -- )
+   1070 io-c! 1071 io-c!
+;
+
+\ Set sane configuration; BCD mode is required by Linux.
+\ PC87417.pdf page 153 (chapter 8.3.13) - RTC Control Register A
+\ 20 - Divider Chain Control = Normal Operation
+20 0a rtc!
+\ PC87417.pdf page 155 (chapter 8.3.14) - RTC Control Register B
+\ 02 - 24-hour format enabled
+02 0b rtc!
+\ PC87417.pdf page 156 (chapter 8.3.15) - RTC Control Register C
+00 0c rtc!
+
+\ read from the rtc and do the bcd-to-bin conversion
+: rtc-bin@  ( offset -- value )
+   rtc@ bcd-to-bin
+;
+
+\ to be compatible with the cell boards we provide a .date word
+\ .date prints the current date and time on the firmware prompt
+: .date  ( -- )
+   0 rtc-bin@  ( seconds )
+   2 rtc-bin@
+   4 rtc-bin@
+   7 rtc-bin@
+   8 rtc-bin@  ( seconds minutes hours day month )
+   9 rtc-bin@ d# 1900 + dup d# 1970 <  IF  d# 100 +  THEN
+   decimal 4 0.r 2d emit 2 0.r 2d emit 2 0.r space
+   2 0.r 3a emit 2 0.r 3a emit 2 0.r hex
+;