Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 240 insertions, 0 deletions

diff --git a/qemu/roms/SLOF/board-js2x/slof/rtas.fs b/qemu/roms/SLOF/board-js2x/slof/rtas.fs
new file mode 100644
index 000000000..0a90c2903
--- /dev/null
+++ b/qemu/roms/SLOF/board-js2x/slof/rtas.fs
@@ -0,0 +1,240 @@
+\ *****************************************************************************
+\ * Copyright (c) 2004, 2008 IBM Corporation
+\ * All rights reserved.
+\ * This program and the accompanying materials
+\ * are made available under the terms of the BSD License
+\ * which accompanies this distribution, and is available at
+\ * http://www.opensource.org/licenses/bsd-license.php
+\ *
+\ * Contributors:
+\ *     IBM Corporation - initial implementation
+\ ****************************************************************************/
+
+#include <rtas/rtas-init.fs>
+#include <rtas/rtas-cpu.fs>
+#include <rtas/rtas-reboot.fs>
+#include <rtas/rtas-flash.fs>
+#include <rtas/rtas-vpd.fs>
+
+\ for update-flash
+: (get-flashside)  ( -- flashside )  rtas-get-flashside  ;
+
+' (get-flashside) to get-flashside
+
+\ remember the current flashside
+get-flashside to flashside? 
+
+\ for update-flash
+: (set-flashside)  ( flashside -- status )
+   dup rtas-set-flashside =  IF  0  ELSE  -1  THEN
+;
+
+' (set-flashside) to set-flashside
+
+: rtas-ibm-read-pci-config  ( size puid bus devfn off -- x )
+   [ s" ibm,read-pci-config" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   4 rtas-cb rtas>nargs l!
+   2 rtas-cb rtas>nret l!
+   swap 8 lshift or swap 10 lshift or rtas-cb rtas>args0 l!
+   dup 20 rshift rtas-cb rtas>args1 l!
+   ffffffff and rtas-cb rtas>args2 l!
+   rtas-cb rtas>args3 l!
+   enter-rtas
+   rtas-cb rtas>args5 l@
+;
+
+: rtas-fetch-cpus  ( mask -- status )
+   [ s" rtas-fetch-slaves" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   1 rtas-cb rtas>nargs l!
+   1 rtas-cb rtas>nret l!
+   rtas-cb rtas>args0 l!
+   0 rtas-cb rtas>args1 l!
+   enter-rtas
+   rtas-cb rtas>args1 l@
+;
+
+: rtas-stop-bootwatchdog  ( -- status )
+   [ s" rtas-stop-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   0 rtas-cb rtas>nargs l!
+   1 rtas-cb rtas>nret l!
+   enter-rtas
+   rtas-cb rtas>args0 l@
+;
+
+: rtas-set-bootwatchdog  ( seconds -- )
+   [ s" rtas-set-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   1 rtas-cb rtas>nargs l!
+   0 rtas-cb rtas>nret l!
+   rtas-cb rtas>args0 l!
+   enter-rtas
+;
+
+' rtas-set-bootwatchdog to set-watchdog
+
+: rtas-dump-flash  ( offset cnt -- )
+   [ s" rtas-dump-flash" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   2 rtas-cb rtas>nargs l!
+   0 rtas-cb rtas>nret l!
+   rtas-cb rtas>args0 l!
+   rtas-cb rtas>args1 l!
+   enter-rtas
+;
+
+create blist 50 allot
+blist 50 erase
+
+: build-blocklist_old
+   \ set version
+   1 blist c!
+   \ set length of block list
+   50 blist 7 + c!
+   \ no more block list
+   0000000000000000 blist 8 + !
+   \ first block
+   get-load-base 0 + blist 10 + !
+   80000 blist 18 + !
+   get-load-base 80000 + blist 20 + !
+   80000 blist 28 + !
+   get-load-base 100000 + blist 30 + !
+   80000 blist 38 + !
+   get-load-base 180000 + blist 40 + !
+   8006C blist 48 + !
+;
+
+80000 constant _block_size
+
+: build-blocklist
+   \ set length of block list
+   \ length of flashfs at load-base is at offset 30... get it...
+   get-load-base 30 + @
+   \ calculate the number of blocks we need
+   _block_size / 1 +
+   \ total number of blocks is 2 (for header and block_list extension + (number of blocks for flashfs * 2 (1 for address 1 for length))
+   2 * 2 + 8 * blist !
+   \ set version ( in first byte only )
+   1 blist c!
+   \ no more block list
+   0000000000000000 blist 8 + !
+   \ length of flashfs at load-base is at offset 30... get it...
+   get-load-base 30 + @
+   \ i define one block to be 64K, so calculate the number of blocks we need and loop over them
+   _block_size / 1 + 0 do
+      get-load-base _block_size i * +  \ which position of load-base to store
+      blist 10 +             \ at what offset of blist ( 0x8 + for header 0x8 + for extension )
+      i 10 * +               \ for each loop we have done 0x10 +
+      !                      \ store it
+      get-load-base 30 + @
+      _block_size i * -      \ remaining length
+      dup _block_size > 
+      IF                     \ is the remaining length > block size
+	drop _block_size     \ then store the block size as length
+      ELSE
+			     \ do nothing (store remaining length)
+      THEN
+      blist 10 +          \ store the length at
+      i 10 * +            \ correct blist offset 
+      8 +                 \ + 8 (we have stored address, now the length)
+      !                   \ store it
+   loop
+;
+
+
+
+: build-blocklist-v0_old
+   \ set version
+   0 blist c!
+   48 blist 7 + c!
+   \ first block
+   get-load-base 0 + blist 8 + !
+   80000 blist 10 + !
+   get-load-base 80000 + blist 18 + !
+   80000 blist 20 + !
+   get-load-base 100000 + blist 28 + !
+   80000 blist 30 + !
+   get-load-base 180000 + blist 38 + !
+   8006C blist 40 + !
+;
+
+: build-blocklist-v0
+   \ set length of block list
+   \ length of flashfs at load-base is at offset 30... get it...
+   get-load-base 30 + @
+   \ calculate the number of blocks we need
+   _block_size / 1 +
+   \ total number of blocks is 1 (for header + (number of blocks for flashfs * 2 (1 for address 1 for length))
+   2 * 1 + 8 * blist !
+   \ length of flashfs at load-base is at offset 30... get it...
+   get-load-base 30 + @
+   \ i define one block to be 64K, so calculate the number of blocks we need and loop over them
+   _block_size / 1 + 0 do
+      get-load-base _block_size i * +  \ which position of load-base to store
+      blist 8 +             \ at what offset of blist ( 0x8 + for header)
+      i 10 * +               \ for each loop we have done 0x10 +
+      !                      \ store it
+      get-load-base 30 + @
+      _block_size i * -      \ remaining length
+      dup _block_size > 
+      IF                     \ is the remaining length > block size
+	drop _block_size     \ then store the block size as length
+      ELSE
+			     \ do nothing (store remaining length)
+      THEN
+      blist 8 +          \ store the length at
+      i 10 * +            \ correct blist offset 
+      8 +                 \ + 8 (we have stored address, now the length)
+      !                   \ store it
+   loop
+;
+
+
+: yy
+   build-blocklist
+   blist rtas-ibm-update-flash-64-and-reboot
+;
+
+: yy0
+   build-blocklist-v0
+   blist rtas-ibm-update-flash-64-and-reboot
+;
+
+: rtas-ibm-update-flash-64  ( block-list -- status )
+   [ s" ibm,update-flash-64" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   2 rtas-cb rtas>nargs l!
+   1 rtas-cb rtas>nret l!
+   rtas-cb rtas>args0 l!
+   \ special unofficial parameter: if this is set to 1, the rtas function will not check, wether
+   \ we are on the perm side... this is needed for "update-flash -c" to work...
+   1 rtas-cb rtas>args1 l!
+   enter-rtas
+   rtas-cb rtas>args2 l@
+;
+
+\ for update-flash
+: flash-write  ( image-address -- status)
+   load-base-override >r to load-base-override build-blocklist-v0
+   blist rtas-ibm-update-flash-64
+   r> to load-base-override 0=  IF  true  ELSE  false  THEN
+;
+
+: commit  1 rtas-ibm-manage-flash-image ;
+: reject  0 rtas-ibm-manage-flash-image ;
+
+: rtas-ibm-validate-flash-image  ( image-to-commit -- status )
+   [ s" ibm,validate-flash-image" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   2 rtas-cb rtas>nargs l!
+   2 rtas-cb rtas>nret l!
+   rtas-cb rtas>args0 l!
+   enter-rtas
+   rtas-cb rtas>args1 l@
+;
+
+: rtas-get-blade-descr ( address size -- len status )
+   [ s" rtas-get-blade-descr" rtas-get-token ] LITERAL rtas-cb rtas>token l!
+   2 rtas-cb rtas>nargs l!
+   2 rtas-cb rtas>nret l!
+   rtas-cb rtas>args1 l!
+   rtas-cb rtas>args0 l!
+   enter-rtas
+   rtas-cb rtas>args2 l@
+   rtas-cb rtas>args3 l@
+;