Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 557 deletions

diff --git a/qemu/roms/SLOF/board-js2x/slof/OF.fs b/qemu/roms/SLOF/board-js2x/slof/OF.fs
deleted file mode 100644
index 3e3773580..000000000
--- a/qemu/roms/SLOF/board-js2x/slof/OF.fs
+++ /dev/null
@@ -1,557 +0,0 @@
-\ *****************************************************************************
-\ * Copyright (c) 2004, 2008 IBM Corporation
-\ * All rights reserved.
-\ * This program and the accompanying materials
-\ * are made available under the terms of the BSD License
-\ * which accompanies this distribution, and is available at
-\ * http://www.opensource.org/licenses/bsd-license.php
-\ *
-\ * Contributors:
-\ *     IBM Corporation - initial implementation
-\ ****************************************************************************/
-
-\ The master file.  Everything else is included into here.
-
-hex
-
-' ll-cr to cr
-
-\ as early as possible we want to know if it is js20, js21 or bimini
-\ u3 = js20; u4 = js21/bimini
-\ the difference if bimini or js21 will be done later depending if
-\ obsidian or citrine is found
-\ f8000000 is probably the place of the u3/u4 version
-f8000000 rl@ CONSTANT uni-n-version
-uni-n-version 4 rshift  dup 3 = CONSTANT u3?  4 = CONSTANT u4?
-\ if (f4000682 >> 4) == 1... it is a bimini...
-f4000682 rb@ 4 rshift 1 = CONSTANT bimini?
-
-\ to decide wether vga initialisation using bios emulation should be attempted,
-\ we need to know wether a vga-device was found during pci-scan.
-\ If it is found, this value will be set to the device's phandle
-0 value vga-device-node?
-
-\ planar-id reads back GPIO 29 30 31 and returns it as one value
-\ if planar-id >= 5 it should be GA2 else it is GA1 (JS20 only)
-defer planar-id  ( -- planar-id )
-
-: (planar-id)  ( -- planar-id)
-   \ default implementation of planar-id just returns 8
-   \ the highest possible planar id for JS20 is 7
-   8
-;
-
-' (planar-id) to planar-id
-
-#include "header.fs"
-
-\ I/O accesses.
-#include "io.fs"
-
-\ XXX: Enable first UART on JS20, scripts forget to do this.  Sigh.
-3 7 siocfg!  1 30 siocfg!
-
-#include "serial.fs"
-
-cr
-
-#include "base.fs"
-
-\ Little-endian accesses.  Also known as `wrong-endian'.
-#include <little-endian.fs>
-
-\ do not free-mem if address is not within the heap
-\ workaround for NVIDIA card
-: free-mem  (  addr len -- )
-   over heap-start heap-end within  IF
-      free-mem
-   ELSE
-      2drop
-   THEN
-;
-
-: #join  ( lo hi #bits -- x )  lshift or ;
-: #split ( x #bits -- lo hi )  2dup rshift dup >r swap lshift xor r> ;
-
-: blink ;
-
-: reset-dual-emit ;
-
-: console-clean-fifo ;
-
-: bootmsg-nvupdate ;
-
-: asm-cout 2drop drop ;
-
-#include "logging.fs"
-
-: log-string 2drop ;
-
-#include "bootmsg.fs"
-
-000 cp
-
-\ disable the nvram logging until we know if we are
-\ running from ram/takeover/js20 or in normal mode on js21
-: (nvramlog-write-byte)  drop ;
-' (nvramlog-write-byte) to nvramlog-write-byte
-
-#include "exception.fs"
-
-: mm-log-warning 2drop ;
-
-: write-mm-log ( data length type -- status )
-	3drop 0
-;
-
-080 cp
-
-#include "rtc.fs"
-
-100 cp
-
-\ Input line editing.
-#include "accept.fs"
-
-120 cp
-
-#include "dump.fs"
-
-cistack ciregs >r1 ! \ kernel wants a stack :-)
-
-#include "romfs.fs"
-
-140 cp
-#include "flash.fs"
-
-\ 1 temp; 0 perm; let's default to temp
-1 VALUE flashside?
-
-\ claim the memory used by copy of the flash
-flash-header  IF
-   romfs-base dup flash-image-size 0 claim drop
-THEN
-
-s" bootinfo" romfs-lookup drop c + l@ CONSTANT start-addr
-start-addr flash-addr <> CONSTANT takeover?
-
-takeover? u3? or 0=  IF
-   \ we want nvram logging to work
-   ['] .nvramlog-write-byte to nvramlog-write-byte
-THEN
-
-160 cp
-
-u4? IF f8002100 rl@ 0= ELSE false THEN  ?INCLUDE u4-mem.fs
-u3?  IF
-   planar-id 5 >=  IF
-      40000 to nvram-size
-   ELSE
-      \ change nvram-size to 8000 for GA1 blades
-      8000 to nvram-size
-   THEN
-THEN
-
-
-takeover?  IF
-   \ potentially coming from phype
-   u4?  IF
-      \ takeover on JS21 is using some nvram area
-      \ which might be available
-      \ on JS20 the nvram is too small and
-      \ we just overwrite the nvram
-      sec-nvram-base to nvram-base
-   THEN
-   sec-nvram-size to nvram-size
-   \ in takeover mode the nvram is probably not mapped
-   \ to the exact location where the nvram starts
-   \ doing a small check to see if we have a partition
-   \ starting with 70; this test is far from perfect but
-   \ takeover is not the most common mode of running slof
-   nvram-base rb@ 70 <>  IF  0 nvram-base rb!  THEN
-THEN
-
-200 cp
-
-#include <slof-logo.fs>
-#include <banner.fs>
-
-: .banner .slof-logo .banner ;
-
-\ Get the secondary CPUs into our own spinloop.
-f8000050 rl@ CONSTANT master-cpu
-\ cr .( The master cpu is #) master-cpu .
-
-VARIABLE cpu-mask
-: get-slave ( n -- online? )
-  0 3ff8 ! 18 lshift 30000000 or 48003f02 over l! icbi 10000 0 DO LOOP 3ff8 @ ;
-: mark-online ( n -- )  1 swap lshift cpu-mask @ or cpu-mask ! ;
-: get-slaves  40 0 DO i get-slave IF i mark-online THEN LOOP ;
-: cpu-report  ( -- )
-   cpu-mask @ 40 0  DO  dup 1 and  IF  ." #" i .  THEN  1 rshift  LOOP  drop
-;
-
-220 cp
-master-cpu mark-online get-slaves
-
-DEFER disable-watchdog ( -- )
-DEFER find-boot-sector ( -- )
-
-
-240 cp
-\ Timebase frequency, in Hz.
-\ -1 VALUE tb-frequency
-d# 14318378 VALUE tb-frequency   \ default value - needed for "ms" to work
--1 VALUE cpu-frequency
-
-#include "helper.fs"
-260 cp
-
-#include <timebase.fs>
-
-270 cp
-
-#include <fcode/evaluator.fs>
-
-280 cp
-
-\ rtas-config is not used
-0 CONSTANT rtas-config
-
-#include "rtas.fs"
-290 cp
-s" update_flash.fs" included
-2a0 cp
-cpu-mask @ rtas-fetch-cpus drop
-
-: of-start-cpu rtas-start-cpu ;
-
-' power-off to halt
-' rtas-system-reboot to reboot
-
-: other-firmware  rtas-get-flashside 0= IF 1 ELSE 0 THEN rtas-set-flashside reboot ;
-: disable-boot-watchdog rtas-stop-bootwatchdog drop ;
-' disable-boot-watchdog to disable-watchdog
-
-true value bmc?
-false value debug-boot?
-
-\ for JS21/Bimini try to detect BMC... if kcs (io @ca8) status is not ff...
-u4? IF ca8 4 + io-c@ ff = IF false to bmc? true to debug-boot? THEN THEN
-
-VARIABLE memnode
-
-\ Hook to help loading our secondary boot loader.
-DEFER disk-read ( lba cnt addr -- )
-0 VALUE disk-off
-
-create vpd-cb 24 allot
-create vpd-bootlist 4 allot
-2c0 cp
-#include "ipmi-vpd.fs"
-2e0 cp
-#include <quiesce.fs>
-300 cp
-#include <usb/usb-static.fs>
-320 cp
-#include <scsi-loader.fs>
-#include <root.fs>
-360 cp
-#include "tree.fs"
-
-: .system-information  ( -- )
-   s"                   " type cr
-   s" SYSTEM INFORMATION" type cr
-   s"  Processor  = " type s" cpu" get-chosen  IF
-      drop l@ >r pvr@ s" pvr>name" r> $call-method type
-      s"  @ " type cpu-frequency d# 1000000 /
-      decimal . hex s" MHz" type
-   THEN  cr s"  I/O Bridge = " type u3?  IF
-      s" U3"  ELSE  s" U4"  THEN type
-   f8000000 rl@ 4 rshift s"  (" type 1 0.r s" ." type
-   f8000000 rl@ f and 1 0.r s" )" type cr
-   s"  SMP Size   = " type cpu-mask @ cnt-bits 1 0.r
-   s"  (" type cpu-report 8 emit s" )" type
-   cr s"  Boot-Date  = " type .date cr
-   s"  Memory     = " type s" memory" get-chosen  IF
-      drop l@ s" mem-report" rot $call-method  THEN
-   cr s"  Board Type = " type u3?  IF
-      s" JS20(GA" type planar-id 5 >=  IF
-         s" 2)" ELSE s" 1)" THEN type
-   ELSE bimini?  IF  s" Bimini"  ELSE  s" JS21"  THEN  type  THEN
-   s"  (" type .vpd-machine-type [char] / emit
-   .vpd-machine-serial [char] / emit
-   .vpd-hw-revision 8 emit  s" )" type cr
-   s"  MFG Date   = " type .vpd-manufacturer-date cr
-   s"  Part No.   = " type .vpd-part-number cr
-   s"  FRU No.    = " type .vpd-fru-number cr
-   s"  FRU Serial = " type .vpd-cardprefix-serial .vpd-card-serial cr
-   s"  UUID       = " type .vpd-uuid cr
-   s"  Flashside  = " type rtas-get-flashside 0=  IF
-      ." 0 (permanent)"
-   ELSE
-      ." 1 (temporary)" THEN cr
-   s"  Version    = " type 
-   takeover?  IF
-      romfs-base 38 + a type
-   ELSE
-      slof-build-id here swap rmove 
-      here slof-build-id nip type cr
-      s"  Build Date = " type bdate2human type
-   THEN
-   cr cr
-;
-
-800 cp
-
-#include "nvram.fs"
-takeover? not u4? and  IF
-   \ if were are not in takeover mode the nvram should look
-   \ something like this:
-   \ type  size  name
-   \ ========================
-   \  51  20000  ibm,CPU0log
-   \  51   5000  ibm,CPU1log
-   \  70   1000  common
-   \  7f  da000  <free-space>
-   \ the partition with the type 51 should have been added
-   \ by LLFW... if it does not exist then something went
-   \ wrong and we just destroy the whole thing
-   51 get-nvram-partition IF  0 0 nvram-c!  ELSE  2drop  THEN
-THEN
-
-880 cp
-
-\ dmesg/dmesg2 not available if running in takeover/ram mode or on js20
-: dmesg  ( -- )  u3? takeover? or 0=  IF  dmesg  THEN ;
-: dmesg2  ( -- )  u3? takeover? or 0=  IF  dmesg2  THEN ;
-
-#include "envvar.fs"
-check-for-nvramrc
-
-8a0 cp
-\ The client interface.
-#include "client.fs"
-\ ELF binary file format.
-#include "elf.fs"
-#include <loaders.fs>
-
-8a8 cp
-
-\ check wether a VGA device was found during pci scan, if it was
-\ try to initialize it and create the needed device-nodes
-0 value biosemu-vmem
-100000 value biosemu-vmem-size
-0 value screen-info
-
-: init-vga-devices  ( -- )
-   vga-device-node? 0= use-biosemu? 0= OR IF
-      EXIT
-   THEN
-   s" VGA Device found: " type vga-device-node? node>path type s"  initializing..." type cr
-   \ claim virtual memory for biosemu of 1MB
-   biosemu-vmem-size 4 claim to biosemu-vmem
-   \ claim memory for screen-info struct (140 bytes)
-   d# 140 4 claim to screen-info
-   \ remember current-node (it might be node 0 so we cannot use get-node)
-   current-node @
-   \ change into vga device node
-   vga-device-node? set-node
-   \ run biosemu to initialize the vga card
-   \ s" Time before biosemu:" type .date cr
-   vga-device-node? node>path ( pathstr len )
-   s" biosemu " biosemu-vmem $cathex ( pathstr len paramstr len )
-   20 char-cat \ add a space ( pathstr len paramstr len )
-   biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len )
-   20 char-cat \ add a space ( pathstr len paramstr len )
-   2swap $cat ( paramstr+path len )
-   biosemu-debug 0<> IF
-      20 char-cat biosemu-debug $cathex \ add biosemu-debug as param
-      ( paramstr+path+biosemu-debug len )
-   THEN
-   .(client-exec) IF
-      ." biosemu client exec failed!" cr
-      set-node                          \ restore old current-node
-      EXIT
-   THEN
-   \ s" Time after biosemu:" type .date cr
-   s" VGA initialization: detecting displays..." type cr
-   \ try to get info for two monitors
-   2 0 DO 
-      \ setup screen-info struct as input to get_vbe_info
-      s" DDC" 0 char-cat screen-info swap move \ null-terminated "DDC" as signature
-      d# 140 screen-info 4 + w! \ reserved size in bytes (see claim above)
-      i screen-info 6 + c! \ monitor number
-      \ 320 screen-info 7 + w! \ max. screen width (800)
-      500 screen-info 7 + w! \ max. screen width (1280)
-      \ following line would be the right thing to do, however environment seems not setup yet...
-      \ screen-#columns char-width * 500 min 280 max screen-info 7 + w! \ max. screen width, calculated from environment variable screen-#columns, but max. 1280, min. 640...
-      8 screen-info 9 + c! \ requested color depth (8bpp)
-      \ d# 16 screen-info 9 + c! \ requested color depth (16bpp)
-      \ execute get_vbe_info from load-base
-      \ s" Time before client exec:" type .date cr
-      \ since node>path overwrites strings created with s" 
-      \ we need to call it before assembling the parameter string
-      vga-device-node? node>path ( pathstr len )
-      s" get_vbe_info " biosemu-vmem $cathex ( pathstr len paramstr len )
-      20 char-cat \ add a space ( pathstr len paramstr len )
-      biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len )
-      20 char-cat \ add a space ( pathstr len paramstr len )
-      2swap $cat ( paramstr+path len )
-      20 char-cat
-      screen-info $cathex
-      .(client-exec) 0=
-      \ s" Time after client exec:" type .date cr
-      screen-info c@ 0<> AND IF
-        s"   display " type i . s" found..." type 
-        \ screen found
-        \ create device entry
-        get-node node>name \ get current nodes name (e.g. "vga") ( str len )
-        i \ put display-num on the stack ( str len displaynum )
-        new-device \ create new device
-           s" vga-display.fs" included
-        finish-device
-        s" created." type cr
-      THEN
-   LOOP
-   \ return to where we were before changing to vga device node
-   set-node
-   \ release the claimed memory
-   screen-info d# 140 release 
-   biosemu-vmem biosemu-vmem-size release
-
-   s" VGA initialization done." type cr
-;
-
-init-vga-devices
-
-: enable-framebuffer-output  ( -- )
-\ enable output on framebuffer
-   s" screen" find-alias ?dup  IF
-      \ we need to open/close the screen device once
-      \ before "ticking" display-emit to emit
-      open-dev close-node
-      s" display-emit" $find  IF 
-         to emit 
-      ELSE
-         2drop
-      THEN
-   THEN
-;
-
-enable-framebuffer-output
-
-8b0 cp
-
-\ do not let the usb scan overwrite the atapi cdrom alias
-\ pci-cdrom-num TO cdrom-alias-num
-usb-scan
-
-: create-aliases  ( -- )
-   s" net" s" net1" find-alias ?dup  IF  set-alias ELSE 2drop  THEN
-   s" disk" s" disk0" find-alias ?dup  IF  set-alias  ELSE  2drop  THEN
-   s" cdrom" s" cdrom0" find-alias ?dup  IF  set-alias  ELSE  2drop  THEN
-;
-
-create-aliases
-
-8ff cp
-
-.system-information
-
-: directserial
-u3? IF
-	s" /ht/isa/serial@3f8" io
-ELSE
-	s" direct-serial?" evaluate IF s" /ht/isa/serial@2f8" io ELSE s" /ht/isa/serial@3f8" io THEN
-THEN
-;
-
-directserial
-  
-\ on bimini we want to automatically enable screen and keyboard, if they are detected...
-bimini? IF
-   key? IF
-      cr ."    input available on current console input device, not switching input / output." cr
-   ELSE
-      \ this enables the framebuffer as primary output device
-      s" screen" find-alias  IF  drop
-         s" screen" output
-         \ at this point serial output is theoretically disabled
-         ."    screen detected and set as default output device" cr
-      THEN
-      \ enable USB keyboard
-      s" keyboard" find-alias  IF  drop
-         s" keyboard" input
-         \ at this point serial input is disabled
-         ."    keyboard detected and set as default input device" cr cr cr
-         s"   Press 's' to enter Open Firmware." type cr
-         500 ms
-      THEN
-   THEN
-THEN
-
-: .flashside
-   cr ." The currently active flashside is: "
-   rtas-get-flashside 0= IF ." 0 (permanent)" ELSE
-   ." 1 (temporary)" THEN
-;
-
-bmc? IF  disable-watchdog  THEN
-
-: flashsave  ( "{filename}" -- rc )
-  (parse-line) dup 0> IF
-    s" netsave "             \ command
-    get-flash-base $cathex   \ Flash base addr
-    s"  400000 " $cat        \ Flash size (4MB)
-    2swap $cat               \ add parameters from (parse-line)
-    evaluate
-  ELSE
-    cr
-    ." Usage: flashsave [bootp|dhcp,]filename[,siaddr][,ciaddr][,giaddr][,bootp-retries][,tftp-retries][,use_ci]"
-    cr 2drop
-  THEN
-;
-
-#include <vpd-bootlist.fs>
-
-\ for the blades we read the bootlist from the VPD
-bimini? takeover? or 0=  IF  ['] vpd-boot-import to read-bootlist  THEN
-
-\ for the bimini, we try to boot from disk, if it exists, 
-\ only if "boot-device" is not set in the nvram
-: bimini-bootlist
-   \ check nvram
-   s" boot-device" evaluate swap drop ( boot-device-strlen )
-   0= IF
-      \ no boot-device set in NVRAM, check if disk is available and set it...
-      \ clear boot-device list
-      0 0 set-boot-device
-      s" disk" find-alias ?dup IF
-         \ alias found, use it as default
-         add-boot-device
-      THEN
-   THEN
-;
-
-bimini? IF ['] bimini-bootlist to read-bootlist THEN
-
-#include <start-up.fs>
-
-#include <boot.fs>
-
-cr .(   Welcome to Open Firmware)
-cr
-#include "copyright-oss.fs"
-cr
-
-\ this CATCH is to ensure the code bellow always executes:  boot may ABORT!
-' start-it CATCH drop
-
-#include <history.fs>
-nvram-history? [IF]
-." loading shell history .. "
-history-load
-." done" cr
-[THEN]
-