Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

2 files changed, 0 insertions, 168 deletions

diff --git a/qemu/include/hw/ssi/ssi.h b/qemu/include/hw/ssi/ssi.h
deleted file mode 100644
index 4a0a53903..000000000
--- a/qemu/include/hw/ssi/ssi.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* QEMU Synchronous Serial Interface support.  */
-
-/* In principle SSI is a point-point interface.  As such the qemu
-   implementation has a single slave device on a "bus".
-   However it is fairly common for boards to have multiple slaves
-   connected to a single master, and select devices with an external
-   chip select.  This is implemented in qemu by having an explicit mux device.
-   It is assumed that master and slave are both using the same transfer width.
-   */
-
-#ifndef QEMU_SSI_H
-#define QEMU_SSI_H
-
-#include "hw/qdev.h"
-
-typedef struct SSISlave SSISlave;
-typedef struct SSISlaveClass SSISlaveClass;
-typedef enum SSICSMode SSICSMode;
-
-#define TYPE_SSI_SLAVE "ssi-slave"
-#define SSI_SLAVE(obj) \
-     OBJECT_CHECK(SSISlave, (obj), TYPE_SSI_SLAVE)
-#define SSI_SLAVE_CLASS(klass) \
-     OBJECT_CLASS_CHECK(SSISlaveClass, (klass), TYPE_SSI_SLAVE)
-#define SSI_SLAVE_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(SSISlaveClass, (obj), TYPE_SSI_SLAVE)
-
-#define SSI_GPIO_CS "ssi-gpio-cs"
-
-enum SSICSMode {
-    SSI_CS_NONE = 0,
-    SSI_CS_LOW,
-    SSI_CS_HIGH,
-};
-
-/* Slave devices.  */
-struct SSISlaveClass {
-    DeviceClass parent_class;
-
-    int (*init)(SSISlave *dev);
-
-    /* if you have standard or no CS behaviour, just override transfer.
-     * This is called when the device cs is active (true by default).
-     */
-    uint32_t (*transfer)(SSISlave *dev, uint32_t val);
-    /* called when the CS line changes. Optional, devices only need to implement
-     * this if they have side effects associated with the cs line (beyond
-     * tristating the txrx lines).
-     */
-    int (*set_cs)(SSISlave *dev, bool select);
-    /* define whether or not CS exists and is active low/high */
-    SSICSMode cs_polarity;
-
-    /* if you have non-standard CS behaviour override this to take control
-     * of the CS behaviour at the device level. transfer, set_cs, and
-     * cs_polarity are unused if this is overwritten. Transfer_raw will
-     * always be called for the device for every txrx access to the parent bus
-     */
-    uint32_t (*transfer_raw)(SSISlave *dev, uint32_t val);
-};
-
-struct SSISlave {
-    DeviceState parent_obj;
-
-    /* Chip select state */
-    bool cs;
-};
-
-#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev)
-
-extern const VMStateDescription vmstate_ssi_slave;
-
-#define VMSTATE_SSI_SLAVE(_field, _state) {                          \
-    .name       = (stringify(_field)),                               \
-    .size       = sizeof(SSISlave),                                  \
-    .vmsd       = &vmstate_ssi_slave,                                \
-    .flags      = VMS_STRUCT,                                        \
-    .offset     = vmstate_offset_value(_state, _field, SSISlave),    \
-}
-
-DeviceState *ssi_create_slave(SSIBus *bus, const char *name);
-DeviceState *ssi_create_slave_no_init(SSIBus *bus, const char *name);
-
-/* Master interface.  */
-SSIBus *ssi_create_bus(DeviceState *parent, const char *name);
-
-uint32_t ssi_transfer(SSIBus *bus, uint32_t val);
-
-/* Automatically connect all children nodes a spi controller as slaves */
-void ssi_auto_connect_slaves(DeviceState *parent, qemu_irq *cs_lines,
-                             SSIBus *bus);
-
-/* max111x.c */
-void max111x_set_input(DeviceState *dev, int line, uint8_t value);
-
-#endif
diff --git a/qemu/include/hw/ssi/xilinx_spips.h b/qemu/include/hw/ssi/xilinx_spips.h
deleted file mode 100644
index dbb9eefba..000000000
--- a/qemu/include/hw/ssi/xilinx_spips.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Header file for the Xilinx Zynq SPI controller
- *
- * Copyright (C) 2015 Xilinx Inc
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#ifndef XLNX_SPIPS_H
-#define XLNX_SPIPS_H
-
-#include "hw/ssi/ssi.h"
-#include "qemu/fifo8.h"
-
-typedef struct XilinxSPIPS XilinxSPIPS;
-
-#define XLNX_SPIPS_R_MAX        (0x100 / 4)
-
-struct XilinxSPIPS {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    MemoryRegion mmlqspi;
-
-    qemu_irq irq;
-    int irqline;
-
-    uint8_t num_cs;
-    uint8_t num_busses;
-
-    uint8_t snoop_state;
-    qemu_irq *cs_lines;
-    SSIBus **spi;
-
-    Fifo8 rx_fifo;
-    Fifo8 tx_fifo;
-
-    uint8_t num_txrx_bytes;
-
-    uint32_t regs[XLNX_SPIPS_R_MAX];
-};
-
-#define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
-#define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
-
-#define XILINX_SPIPS(obj) \
-     OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_CLASS(klass) \
-     OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
-#define XILINX_SPIPS_GET_CLASS(obj) \
-     OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
-
-#define XILINX_QSPIPS(obj) \
-     OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
-
-#endif /* XLNX_SPIPS_H */