Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 95 deletions

diff --git a/qemu/include/hw/sd/sdhci.h b/qemu/include/hw/sd/sdhci.h
deleted file mode 100644
index 0f0c3f1e6..000000000
--- a/qemu/include/hw/sd/sdhci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SD Association Host Standard Specification v2.0 controller emulation
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * Mitsyanko Igor <i.mitsyanko@samsung.com>
- * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
- *
- * Based on MMC controller for Samsung S5PC1xx-based board emulation
- * by Alexey Merkulov and Vladimir Monakhov.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- * See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU _General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef SDHCI_H
-#define SDHCI_H
-
-#include "qemu-common.h"
-#include "hw/block/block.h"
-#include "hw/pci/pci.h"
-#include "hw/sysbus.h"
-#include "hw/sd/sd.h"
-
-/* SD/MMC host controller state */
-typedef struct SDHCIState {
-    union {
-        PCIDevice pcidev;
-        SysBusDevice busdev;
-    };
-    SDBus sdbus;
-    MemoryRegion iomem;
-
-    QEMUTimer *insert_timer;       /* timer for 'changing' sd card. */
-    QEMUTimer *transfer_timer;
-    qemu_irq eject_cb;
-    qemu_irq ro_cb;
-    qemu_irq irq;
-
-    uint32_t sdmasysad;    /* SDMA System Address register */
-    uint16_t blksize;      /* Host DMA Buff Boundary and Transfer BlkSize Reg */
-    uint16_t blkcnt;       /* Blocks count for current transfer */
-    uint32_t argument;     /* Command Argument Register */
-    uint16_t trnmod;       /* Transfer Mode Setting Register */
-    uint16_t cmdreg;       /* Command Register */
-    uint32_t rspreg[4];    /* Response Registers 0-3 */
-    uint32_t prnsts;       /* Present State Register */
-    uint8_t  hostctl;      /* Host Control Register */
-    uint8_t  pwrcon;       /* Power control Register */
-    uint8_t  blkgap;       /* Block Gap Control Register */
-    uint8_t  wakcon;       /* WakeUp Control Register */
-    uint16_t clkcon;       /* Clock control Register */
-    uint8_t  timeoutcon;   /* Timeout Control Register */
-    uint8_t  admaerr;      /* ADMA Error Status Register */
-    uint16_t norintsts;    /* Normal Interrupt Status Register */
-    uint16_t errintsts;    /* Error Interrupt Status Register */
-    uint16_t norintstsen;  /* Normal Interrupt Status Enable Register */
-    uint16_t errintstsen;  /* Error Interrupt Status Enable Register */
-    uint16_t norintsigen;  /* Normal Interrupt Signal Enable Register */
-    uint16_t errintsigen;  /* Error Interrupt Signal Enable Register */
-    uint16_t acmd12errsts; /* Auto CMD12 error status register */
-    uint64_t admasysaddr;  /* ADMA System Address Register */
-
-    uint32_t capareg;      /* Capabilities Register */
-    uint32_t maxcurr;      /* Maximum Current Capabilities Register */
-    uint8_t  *fifo_buffer; /* SD host i/o FIFO buffer */
-    uint32_t buf_maxsz;
-    uint16_t data_count;   /* current element in FIFO buffer */
-    uint8_t  stopped_state;/* Current SDHC state */
-    bool     pending_insert_quirk;/* Quirk for Raspberry Pi card insert int */
-    bool     pending_insert_state;
-    /* Buffer Data Port Register - virtual access point to R and W buffers */
-    /* Software Reset Register - always reads as 0 */
-    /* Force Event Auto CMD12 Error Interrupt Reg - write only */
-    /* Force Event Error Interrupt Register- write only */
-    /* RO Host Controller Version Register always reads as 0x2401 */
-} SDHCIState;
-
-#define TYPE_PCI_SDHCI "sdhci-pci"
-#define PCI_SDHCI(obj) OBJECT_CHECK(SDHCIState, (obj), TYPE_PCI_SDHCI)
-
-#define TYPE_SYSBUS_SDHCI "generic-sdhci"
-#define SYSBUS_SDHCI(obj)                               \
-     OBJECT_CHECK(SDHCIState, (obj), TYPE_SYSBUS_SDHCI)
-
-#endif /* SDHCI_H */