Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

5 files changed, 545 insertions, 0 deletions

diff --git a/qemu/include/crypto/aes.h b/qemu/include/crypto/aes.h
new file mode 100644
index 000000000..a006da222
--- /dev/null
+++ b/qemu/include/crypto/aes.h
@@ -0,0 +1,68 @@
+#ifndef QEMU_AES_H
+#define QEMU_AES_H
+
+#define AES_MAXNR 14
+#define AES_BLOCK_SIZE 16
+
+struct aes_key_st {
+    uint32_t rd_key[4 *(AES_MAXNR + 1)];
+    int rounds;
+};
+typedef struct aes_key_st AES_KEY;
+
+/* FreeBSD has its own AES_set_decrypt_key in -lcrypto, avoid conflicts */
+#ifdef __FreeBSD__
+#define AES_set_encrypt_key QEMU_AES_set_encrypt_key
+#define AES_set_decrypt_key QEMU_AES_set_decrypt_key
+#define AES_encrypt QEMU_AES_encrypt
+#define AES_decrypt QEMU_AES_decrypt
+#define AES_cbc_encrypt QEMU_AES_cbc_encrypt
+#endif
+
+int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
+int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
+	AES_KEY *key);
+
+void AES_encrypt(const unsigned char *in, unsigned char *out,
+	const AES_KEY *key);
+void AES_decrypt(const unsigned char *in, unsigned char *out,
+	const AES_KEY *key);
+void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
+		     const unsigned long length, const AES_KEY *key,
+		     unsigned char *ivec, const int enc);
+
+extern const uint8_t AES_sbox[256];
+extern const uint8_t AES_isbox[256];
+
+/* AES ShiftRows and InvShiftRows */
+extern const uint8_t AES_shifts[16];
+extern const uint8_t AES_ishifts[16];
+
+/* AES InvMixColumns */
+/* AES_imc[x][0] = [x].[0e, 09, 0d, 0b]; */
+/* AES_imc[x][1] = [x].[0b, 0e, 09, 0d]; */
+/* AES_imc[x][2] = [x].[0d, 0b, 0e, 09]; */
+/* AES_imc[x][3] = [x].[09, 0d, 0b, 0e]; */
+extern const uint32_t AES_imc[256][4];
+
+/*
+AES_Te0[x] = S [x].[02, 01, 01, 03];
+AES_Te1[x] = S [x].[03, 02, 01, 01];
+AES_Te2[x] = S [x].[01, 03, 02, 01];
+AES_Te3[x] = S [x].[01, 01, 03, 02];
+AES_Te4[x] = S [x].[01, 01, 01, 01];
+
+AES_Td0[x] = Si[x].[0e, 09, 0d, 0b];
+AES_Td1[x] = Si[x].[0b, 0e, 09, 0d];
+AES_Td2[x] = Si[x].[0d, 0b, 0e, 09];
+AES_Td3[x] = Si[x].[09, 0d, 0b, 0e];
+AES_Td4[x] = Si[x].[01, 01, 01, 01];
+*/
+
+extern const uint32_t AES_Te0[256], AES_Te1[256], AES_Te2[256],
+                      AES_Te3[256], AES_Te4[256];
+extern const uint32_t AES_Td0[256], AES_Td1[256], AES_Td2[256],
+                      AES_Td3[256], AES_Td4[256];
+
+#endif
diff --git a/qemu/include/crypto/cipher.h b/qemu/include/crypto/cipher.h
new file mode 100644
index 000000000..b4d714f26
--- /dev/null
+++ b/qemu/include/crypto/cipher.h
@@ -0,0 +1,210 @@
+/*
+ * QEMU Crypto cipher algorithms
+ *
+ * Copyright (c) 2015 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QCRYPTO_CIPHER_H__
+#define QCRYPTO_CIPHER_H__
+
+#include "qemu-common.h"
+#include "qapi/error.h"
+
+typedef struct QCryptoCipher QCryptoCipher;
+
+typedef enum {
+    QCRYPTO_CIPHER_ALG_AES_128,
+    QCRYPTO_CIPHER_ALG_AES_192,
+    QCRYPTO_CIPHER_ALG_AES_256,
+    QCRYPTO_CIPHER_ALG_DES_RFB, /* A stupid variant on DES for VNC */
+
+    QCRYPTO_CIPHER_ALG_LAST
+} QCryptoCipherAlgorithm;
+
+typedef enum {
+    QCRYPTO_CIPHER_MODE_ECB,
+    QCRYPTO_CIPHER_MODE_CBC,
+
+    QCRYPTO_CIPHER_MODE_LAST
+} QCryptoCipherMode;
+
+/**
+ * QCryptoCipher:
+ *
+ * The QCryptoCipher object provides a way to perform encryption
+ * and decryption of data, with a standard API, regardless of the
+ * algorithm used. It further isolates the calling code from the
+ * details of the specific underlying implementation, whether
+ * built-in, libgcrypt or nettle.
+ *
+ * Each QCryptoCipher object is capable of performing both
+ * encryption and decryption, and can operate in a number
+ * or modes including ECB, CBC.
+ *
+ * <example>
+ *   <title>Encrypting data with AES-128 in CBC mode</title>
+ *   <programlisting>
+ * QCryptoCipher *cipher;
+ * uint8_t key = ....;
+ * size_t keylen = 16;
+ * uint8_t iv = ....;
+ *
+ * if (!qcrypto_cipher_supports(QCRYPTO_CIPHER_ALG_AES_128)) {
+ *    error_report(errp, "Feature <blah> requires AES cipher support");
+ *    return -1;
+ * }
+ *
+ * cipher = qcrypto_cipher_new(QCRYPTO_CIPHER_ALG_AES_128,
+ *                             QCRYPTO_CIPHER_MODE_CBC,
+ *                             key, keylen,
+ *                             errp);
+ * if (!cipher) {
+ *    return -1;
+ * }
+ *
+ * if (qcrypto_cipher_set_iv(cipher, iv, keylen, errp) < 0) {
+ *    return -1;
+ * }
+ *
+ * if (qcrypto_cipher_encrypt(cipher, rawdata, encdata, datalen, errp) < 0) {
+ *    return -1;
+ * }
+ *
+ * qcrypto_cipher_free(cipher);
+ *   </programlisting>
+ * </example>
+ *
+ */
+
+struct QCryptoCipher {
+    QCryptoCipherAlgorithm alg;
+    QCryptoCipherMode mode;
+    void *opaque;
+};
+
+/**
+ * qcrypto_cipher_supports:
+ * @alg: the cipher algorithm
+ *
+ * Determine if @alg cipher algorithm is supported by the
+ * current configured build
+ *
+ * Returns: true if the algorithm is supported, false otherwise
+ */
+bool qcrypto_cipher_supports(QCryptoCipherAlgorithm alg);
+
+
+/**
+ * qcrypto_cipher_new:
+ * @alg: the cipher algorithm
+ * @mode: the cipher usage mode
+ * @key: the private key bytes
+ * @nkey: the length of @key
+ * @errp: pointer to an uninitialized error object
+ *
+ * Creates a new cipher object for encrypting/decrypting
+ * data with the algorithm @alg in the usage mode @mode.
+ *
+ * The @key parameter provides the bytes representing
+ * the encryption/decryption key to use. The @nkey parameter
+ * specifies the length of @key in bytes. Each algorithm has
+ * one or more valid key lengths, and it is an error to provide
+ * a key of the incorrect length.
+ *
+ * The returned cipher object must be released with
+ * qcrypto_cipher_free() when no longer required
+ *
+ * Returns: a new cipher object, or NULL on error
+ */
+QCryptoCipher *qcrypto_cipher_new(QCryptoCipherAlgorithm alg,
+                                  QCryptoCipherMode mode,
+                                  const uint8_t *key, size_t nkey,
+                                  Error **errp);
+
+/**
+ * qcrypto_cipher_free:
+ * @cipher: the cipher object
+ *
+ * Release the memory associated with @cipher that
+ * was previously allocated by qcrypto_cipher_new()
+ */
+void qcrypto_cipher_free(QCryptoCipher *cipher);
+
+/**
+ * qcrypto_cipher_encrypt:
+ * @cipher: the cipher object
+ * @in: buffer holding the plain text input data
+ * @out: buffer to fill with the cipher text output data
+ * @len: the length of @in and @out buffers
+ * @errp: pointer to an uninitialized error object
+ *
+ * Encrypts the plain text stored in @in, filling
+ * @out with the resulting ciphered text. Both the
+ * @in and @out buffers must have the same size,
+ * given by @len.
+ *
+ * Returns: 0 on success, or -1 on error
+ */
+int qcrypto_cipher_encrypt(QCryptoCipher *cipher,
+                           const void *in,
+                           void *out,
+                           size_t len,
+                           Error **errp);
+
+
+/**
+ * qcrypto_cipher_decrypt:
+ * @cipher: the cipher object
+ * @in: buffer holding the cipher text input data
+ * @out: buffer to fill with the plain text output data
+ * @len: the length of @in and @out buffers
+ * @errp: pointer to an uninitialized error object
+ *
+ * Decrypts the cipher text stored in @in, filling
+ * @out with the resulting plain text. Both the
+ * @in and @out buffers must have the same size,
+ * given by @len.
+ *
+ * Returns: 0 on success, or -1 on error
+ */
+int qcrypto_cipher_decrypt(QCryptoCipher *cipher,
+                           const void *in,
+                           void *out,
+                           size_t len,
+                           Error **errp);
+
+/**
+ * qcrypto_cipher_setiv:
+ * @cipher: the cipher object
+ * @iv: the initialization vector bytes
+ * @niv: the length of @iv
+ * @errpr: pointer to an uninitialized error object
+ *
+ * If the @cipher object is setup to use a mode that requires
+ * initialization vectors, this sets the initialization vector
+ * bytes. The @iv data should have the same length as the
+ * cipher key used when originally constructing the cipher
+ * object. It is an error to set an initialization vector
+ * if the cipher mode does not require one.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_cipher_setiv(QCryptoCipher *cipher,
+                         const uint8_t *iv, size_t niv,
+                         Error **errp);
+
+#endif /* QCRYPTO_CIPHER_H__ */
diff --git a/qemu/include/crypto/desrfb.h b/qemu/include/crypto/desrfb.h
new file mode 100644
index 000000000..773667ee7
--- /dev/null
+++ b/qemu/include/crypto/desrfb.h
@@ -0,0 +1,49 @@
+/*
+ * This is D3DES (V5.09) by Richard Outerbridge with the double and
+ * triple-length support removed for use in VNC.
+ *
+ * These changes are:
+ *  Copyright (C) 1999 AT&T Laboratories Cambridge.  All Rights Reserved.
+ *
+ * This software is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef D3DES_H
+#define D3DES_H 1
+
+/* d3des.h -
+ *
+ *	Headers and defines for d3des.c
+ *	Graven Imagery, 1992.
+ *
+ * Copyright (c) 1988,1989,1990,1991,1992 by Richard Outerbridge
+ *	(GEnie : OUTER; CIS : [71755,204])
+ */
+
+#define EN0	0	/* MODE == encrypt */
+#define DE1	1	/* MODE == decrypt */
+
+void deskey(unsigned char *, int);
+/*		      hexkey[8]     MODE
+ * Sets the internal key register according to the hexadecimal
+ * key contained in the 8 bytes of hexkey, according to the DES,
+ * for encryption or decryption according to MODE.
+ */
+
+void usekey(unsigned long *);
+/*		    cookedkey[32]
+ * Loads the internal key register with the data in cookedkey.
+ */
+
+void des(unsigned char *, unsigned char *);
+/*		    from[8]	      to[8]
+ * Encrypts/Decrypts (according to the key currently loaded in the
+ * internal key register) one block of eight bytes at address 'from'
+ * into the block at address 'to'.  They can be the same.
+ */
+
+/* d3des.h V5.09 rwo 9208.04 15:06 Graven Imagery
+ ********************************************************************/
+
+#endif
diff --git a/qemu/include/crypto/hash.h b/qemu/include/crypto/hash.h
new file mode 100644
index 000000000..b5acbf638
--- /dev/null
+++ b/qemu/include/crypto/hash.h
@@ -0,0 +1,189 @@
+/*
+ * QEMU Crypto hash algorithms
+ *
+ * Copyright (c) 2015 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QCRYPTO_HASH_H__
+#define QCRYPTO_HASH_H__
+
+#include "qemu-common.h"
+#include "qapi/error.h"
+
+typedef enum {
+    QCRYPTO_HASH_ALG_MD5,
+    QCRYPTO_HASH_ALG_SHA1,
+    QCRYPTO_HASH_ALG_SHA256,
+
+    QCRYPTO_HASH_ALG_LAST
+} QCryptoHashAlgorithm;
+
+
+/**
+ * qcrypto_hash_supports:
+ * @alg: the hash algorithm
+ *
+ * Determine if @alg hash algorithm is supported by the
+ * current configured build.
+ *
+ * Returns: true if the algorithm is supported, false otherwise
+ */
+gboolean qcrypto_hash_supports(QCryptoHashAlgorithm alg);
+
+/**
+ * qcrypto_hash_bytesv:
+ * @alg: the hash algorithm
+ * @iov: the array of memory regions to hash
+ * @niov: the length of @iov
+ * @result: pointer to hold output hash
+ * @resultlen: pointer to hold length of @result
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory regions
+ * present in @iov. The @result pointer will be
+ * filled with raw bytes representing the computed
+ * hash, which will have length @resultlen. The
+ * memory pointer in @result must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_bytesv(QCryptoHashAlgorithm alg,
+                        const struct iovec *iov,
+                        size_t niov,
+                        uint8_t **result,
+                        size_t *resultlen,
+                        Error **errp);
+
+/**
+ * qcrypto_hash_bytes:
+ * @alg: the hash algorithm
+ * @buf: the memory region to hash
+ * @len: the length of @buf
+ * @result: pointer to hold output hash
+ * @resultlen: pointer to hold length of @result
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory region
+ * @buf of length @len. The @result pointer will be
+ * filled with raw bytes representing the computed
+ * hash, which will have length @resultlen. The
+ * memory pointer in @result must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_bytes(QCryptoHashAlgorithm alg,
+                       const char *buf,
+                       size_t len,
+                       uint8_t **result,
+                       size_t *resultlen,
+                       Error **errp);
+
+/**
+ * qcrypto_hash_digestv:
+ * @alg: the hash algorithm
+ * @iov: the array of memory regions to hash
+ * @niov: the length of @iov
+ * @digest: pointer to hold output hash
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory regions
+ * present in @iov. The @digest pointer will be
+ * filled with the printable hex digest of the computed
+ * hash, which will be terminated by '\0'. The
+ * memory pointer in @digest must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_digestv(QCryptoHashAlgorithm alg,
+                         const struct iovec *iov,
+                         size_t niov,
+                         char **digest,
+                         Error **errp);
+
+/**
+ * qcrypto_hash_digest:
+ * @alg: the hash algorithm
+ * @buf: the memory region to hash
+ * @len: the length of @buf
+ * @digest: pointer to hold output hash
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory region
+ * @buf of length @len. The @digest pointer will be
+ * filled with the printable hex digest of the computed
+ * hash, which will be terminated by '\0'. The
+ * memory pointer in @digest must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_digest(QCryptoHashAlgorithm alg,
+                        const char *buf,
+                        size_t len,
+                        char **digest,
+                        Error **errp);
+
+/**
+ * qcrypto_hash_base64v:
+ * @alg: the hash algorithm
+ * @iov: the array of memory regions to hash
+ * @niov: the length of @iov
+ * @base64: pointer to hold output hash
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory regions
+ * present in @iov. The @base64 pointer will be
+ * filled with the base64 encoding of the computed
+ * hash, which will be terminated by '\0'. The
+ * memory pointer in @base64 must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_base64v(QCryptoHashAlgorithm alg,
+                         const struct iovec *iov,
+                         size_t niov,
+                         char **base64,
+                         Error **errp);
+
+/**
+ * qcrypto_hash_base64:
+ * @alg: the hash algorithm
+ * @buf: the memory region to hash
+ * @len: the length of @buf
+ * @base64: pointer to hold output hash
+ * @errp: pointer to uninitialized error object
+ *
+ * Computes the hash across all the memory region
+ * @buf of length @len. The @base64 pointer will be
+ * filled with the base64 encoding of the computed
+ * hash, which will be terminated by '\0'. The
+ * memory pointer in @base64 must be released
+ * with a call to g_free() when no longer required.
+ *
+ * Returns: 0 on success, -1 on error
+ */
+int qcrypto_hash_base64(QCryptoHashAlgorithm alg,
+                        const char *buf,
+                        size_t len,
+                        char **base64,
+                        Error **errp);
+
+#endif /* QCRYPTO_HASH_H__ */
diff --git a/qemu/include/crypto/init.h b/qemu/include/crypto/init.h
new file mode 100644
index 000000000..5fc510c4f
--- /dev/null
+++ b/qemu/include/crypto/init.h
@@ -0,0 +1,29 @@
+/*
+ * QEMU Crypto initialization
+ *
+ * Copyright (c) 2015 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef QCRYPTO_INIT_H__
+#define QCRYPTO_INIT_H__
+
+#include "qemu-common.h"
+#include "qapi/error.h"
+
+int qcrypto_init(Error **errp);
+
+#endif /* QCRYPTO_INIT_H__ */