Merge "These changes are the raw update to qemu-2.6."

1 files changed, 162 insertions, 0 deletions

diff --git a/qemu/hw/vfio/pci.h b/qemu/hw/vfio/pci.h
new file mode 100644
index 000000000..3976f6854
--- /dev/null
+++ b/qemu/hw/vfio/pci.h
@@ -0,0 +1,162 @@
+/*
+ * vfio based device assignment support - PCI devices
+ *
+ * Copyright Red Hat, Inc. 2012-2015
+ *
+ * Authors:
+ *  Alex Williamson <alex.williamson@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+#ifndef HW_VFIO_VFIO_PCI_H
+#define HW_VFIO_VFIO_PCI_H
+
+#include "qemu-common.h"
+#include "exec/memory.h"
+#include "hw/pci/pci.h"
+#include "hw/vfio/vfio-common.h"
+#include "qemu/event_notifier.h"
+#include "qemu/queue.h"
+#include "qemu/timer.h"
+
+#define PCI_ANY_ID (~0)
+
+struct VFIOPCIDevice;
+
+typedef struct VFIOQuirk {
+    QLIST_ENTRY(VFIOQuirk) next;
+    void *data;
+    int nr_mem;
+    MemoryRegion *mem;
+} VFIOQuirk;
+
+typedef struct VFIOBAR {
+    VFIORegion region;
+    bool ioport;
+    bool mem64;
+    QLIST_HEAD(, VFIOQuirk) quirks;
+} VFIOBAR;
+
+typedef struct VFIOVGARegion {
+    MemoryRegion mem;
+    off_t offset;
+    int nr;
+    QLIST_HEAD(, VFIOQuirk) quirks;
+} VFIOVGARegion;
+
+typedef struct VFIOVGA {
+    off_t fd_offset;
+    int fd;
+    VFIOVGARegion region[QEMU_PCI_VGA_NUM_REGIONS];
+} VFIOVGA;
+
+typedef struct VFIOINTx {
+    bool pending; /* interrupt pending */
+    bool kvm_accel; /* set when QEMU bypass through KVM enabled */
+    uint8_t pin; /* which pin to pull for qemu_set_irq */
+    EventNotifier interrupt; /* eventfd triggered on interrupt */
+    EventNotifier unmask; /* eventfd for unmask on QEMU bypass */
+    PCIINTxRoute route; /* routing info for QEMU bypass */
+    uint32_t mmap_timeout; /* delay to re-enable mmaps after interrupt */
+    QEMUTimer *mmap_timer; /* enable mmaps after periods w/o interrupts */
+} VFIOINTx;
+
+typedef struct VFIOMSIVector {
+    /*
+     * Two interrupt paths are configured per vector.  The first, is only used
+     * for interrupts injected via QEMU.  This is typically the non-accel path,
+     * but may also be used when we want QEMU to handle masking and pending
+     * bits.  The KVM path bypasses QEMU and is therefore higher performance,
+     * but requires masking at the device.  virq is used to track the MSI route
+     * through KVM, thus kvm_interrupt is only available when virq is set to a
+     * valid (>= 0) value.
+     */
+    EventNotifier interrupt;
+    EventNotifier kvm_interrupt;
+    struct VFIOPCIDevice *vdev; /* back pointer to device */
+    int virq;
+    bool use;
+} VFIOMSIVector;
+
+enum {
+    VFIO_INT_NONE = 0,
+    VFIO_INT_INTx = 1,
+    VFIO_INT_MSI  = 2,
+    VFIO_INT_MSIX = 3,
+};
+
+/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */
+typedef struct VFIOMSIXInfo {
+    uint8_t table_bar;
+    uint8_t pba_bar;
+    uint16_t entries;
+    uint32_t table_offset;
+    uint32_t pba_offset;
+    MemoryRegion mmap_mem;
+    void *mmap;
+    unsigned long *pending;
+} VFIOMSIXInfo;
+
+typedef struct VFIOPCIDevice {
+    PCIDevice pdev;
+    VFIODevice vbasedev;
+    VFIOINTx intx;
+    unsigned int config_size;
+    uint8_t *emulated_config_bits; /* QEMU emulated bits, little-endian */
+    off_t config_offset; /* Offset of config space region within device fd */
+    unsigned int rom_size;
+    off_t rom_offset; /* Offset of ROM region within device fd */
+    void *rom;
+    int msi_cap_size;
+    VFIOMSIVector *msi_vectors;
+    VFIOMSIXInfo *msix;
+    int nr_vectors; /* Number of MSI/MSIX vectors currently in use */
+    int interrupt; /* Current interrupt type */
+    VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */
+    VFIOVGA *vga; /* 0xa0000, 0x3b0, 0x3c0 */
+    PCIHostDeviceAddress host;
+    EventNotifier err_notifier;
+    EventNotifier req_notifier;
+    int (*resetfn)(struct VFIOPCIDevice *);
+    uint32_t vendor_id;
+    uint32_t device_id;
+    uint32_t sub_vendor_id;
+    uint32_t sub_device_id;
+    uint32_t features;
+#define VFIO_FEATURE_ENABLE_VGA_BIT 0
+#define VFIO_FEATURE_ENABLE_VGA (1 << VFIO_FEATURE_ENABLE_VGA_BIT)
+#define VFIO_FEATURE_ENABLE_REQ_BIT 1
+#define VFIO_FEATURE_ENABLE_REQ (1 << VFIO_FEATURE_ENABLE_REQ_BIT)
+    int32_t bootindex;
+    uint8_t pm_cap;
+    bool has_vga;
+    bool pci_aer;
+    bool req_enabled;
+    bool has_flr;
+    bool has_pm_reset;
+    bool rom_read_failed;
+    bool no_kvm_intx;
+    bool no_kvm_msi;
+    bool no_kvm_msix;
+} VFIOPCIDevice;
+
+uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
+void vfio_pci_write_config(PCIDevice *pdev,
+                           uint32_t addr, uint32_t val, int len);
+
+uint64_t vfio_vga_read(void *opaque, hwaddr addr, unsigned size);
+void vfio_vga_write(void *opaque, hwaddr addr, uint64_t data, unsigned size);
+
+bool vfio_blacklist_opt_rom(VFIOPCIDevice *vdev);
+void vfio_vga_quirk_setup(VFIOPCIDevice *vdev);
+void vfio_vga_quirk_exit(VFIOPCIDevice *vdev);
+void vfio_vga_quirk_finalize(VFIOPCIDevice *vdev);
+void vfio_bar_quirk_setup(VFIOPCIDevice *vdev, int nr);
+void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
+void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
+void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
+
+int vfio_populate_vga(VFIOPCIDevice *vdev);
+
+#endif /* HW_VFIO_VFIO_PCI_H */