summaryrefslogtreecommitdiffstats
path: root/qemu/hw/usb/dev-smartcard-reader.c
diff options
context:
space:
mode:
authorYang Zhang <yang.z.zhang@intel.com>2015-08-28 09:58:54 +0800
committerYang Zhang <yang.z.zhang@intel.com>2015-09-01 12:44:00 +0800
commite44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch)
tree66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/usb/dev-smartcard-reader.c
parent9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff)
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5 Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/usb/dev-smartcard-reader.c')
-rw-r--r--qemu/hw/usb/dev-smartcard-reader.c1505
1 files changed, 1505 insertions, 0 deletions
diff --git a/qemu/hw/usb/dev-smartcard-reader.c b/qemu/hw/usb/dev-smartcard-reader.c
new file mode 100644
index 000000000..8952efffa
--- /dev/null
+++ b/qemu/hw/usb/dev-smartcard-reader.c
@@ -0,0 +1,1505 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * CCID Device emulation
+ *
+ * Written by Alon Levy, with contributions from Robert Relyea.
+ *
+ * Based on usb-serial.c, see its copyright and attributions below.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.1 or later.
+ * See the COPYING file in the top-level directory.
+ * ------- (original copyright & attribution for usb-serial.c below) --------
+ * Copyright (c) 2006 CodeSourcery.
+ * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org>
+ * Written by Paul Brook, reused for FTDI by Samuel Thibault,
+ */
+
+/*
+ * References:
+ *
+ * CCID Specification Revision 1.1 April 22nd 2005
+ * "Universal Serial Bus, Device Class: Smart Card"
+ * Specification for Integrated Circuit(s) Cards Interface Devices
+ *
+ * Endianness note: from the spec (1.3)
+ * "Fields that are larger than a byte are stored in little endian"
+ *
+ * KNOWN BUGS
+ * 1. remove/insert can sometimes result in removed state instead of inserted.
+ * This is a result of the following:
+ * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen
+ * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb
+ * from the guest requesting SPD and us returning a smaller packet.
+ * Not sure which messages trigger this.
+ */
+
+#include "qemu-common.h"
+#include "qemu/error-report.h"
+#include "hw/usb.h"
+#include "hw/usb/desc.h"
+
+#include "ccid.h"
+
+#define DPRINTF(s, lvl, fmt, ...) \
+do { \
+ if (lvl <= s->debug) { \
+ printf("usb-ccid: " fmt , ## __VA_ARGS__); \
+ } \
+} while (0)
+
+#define D_WARN 1
+#define D_INFO 2
+#define D_MORE_INFO 3
+#define D_VERBOSE 4
+
+#define CCID_DEV_NAME "usb-ccid"
+#define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME)
+/*
+ * The two options for variable sized buffers:
+ * make them constant size, for large enough constant,
+ * or handle the migration complexity - VMState doesn't handle this case.
+ * sizes are expected never to be exceeded, unless guest misbehaves.
+ */
+#define BULK_OUT_DATA_SIZE 65536
+#define PENDING_ANSWERS_NUM 128
+
+#define BULK_IN_BUF_SIZE 384
+#define BULK_IN_PENDING_NUM 8
+
+#define CCID_MAX_PACKET_SIZE 64
+
+#define CCID_CONTROL_ABORT 0x1
+#define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2
+#define CCID_CONTROL_GET_DATA_RATES 0x3
+
+#define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID"
+#define CCID_VENDOR_DESCRIPTION "QEMU"
+#define CCID_INTERFACE_NAME "CCID Interface"
+#define CCID_SERIAL_NUMBER_STRING "1"
+/*
+ * Using Gemplus Vendor and Product id
+ * Effect on various drivers:
+ * usbccid.sys (winxp, others untested) is a class driver so it doesn't care.
+ * linux has a number of class drivers, but openct filters based on
+ * vendor/product (/etc/openct.conf under fedora), hence Gemplus.
+ */
+#define CCID_VENDOR_ID 0x08e6
+#define CCID_PRODUCT_ID 0x4433
+#define CCID_DEVICE_VERSION 0x0000
+
+/*
+ * BULK_OUT messages from PC to Reader
+ * Defined in CCID Rev 1.1 6.1 (page 26)
+ */
+#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62
+#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63
+#define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65
+#define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f
+#define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c
+#define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d
+#define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61
+#define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b
+#define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e
+#define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a
+#define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69
+#define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71
+#define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72
+#define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73
+
+/*
+ * BULK_IN messages from Reader to PC
+ * Defined in CCID Rev 1.1 6.2 (page 48)
+ */
+#define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80
+#define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81
+#define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82
+#define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83
+#define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84
+
+/*
+ * INTERRUPT_IN messages from Reader to PC
+ * Defined in CCID Rev 1.1 6.3 (page 56)
+ */
+#define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50
+#define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51
+
+/*
+ * Endpoints for CCID - addresses are up to us to decide.
+ * To support slot insertion and removal we must have an interrupt in ep
+ * in addition we need a bulk in and bulk out ep
+ * 5.2, page 20
+ */
+#define CCID_INT_IN_EP 1
+#define CCID_BULK_IN_EP 2
+#define CCID_BULK_OUT_EP 3
+
+/* bmSlotICCState masks */
+#define SLOT_0_STATE_MASK 1
+#define SLOT_0_CHANGED_MASK 2
+
+/* Status codes that go in bStatus (see 6.2.6) */
+enum {
+ ICC_STATUS_PRESENT_ACTIVE = 0,
+ ICC_STATUS_PRESENT_INACTIVE,
+ ICC_STATUS_NOT_PRESENT
+};
+
+enum {
+ COMMAND_STATUS_NO_ERROR = 0,
+ COMMAND_STATUS_FAILED,
+ COMMAND_STATUS_TIME_EXTENSION_REQUIRED
+};
+
+/* Error codes that go in bError (see 6.2.6) */
+enum {
+ ERROR_CMD_NOT_SUPPORTED = 0,
+ ERROR_CMD_ABORTED = -1,
+ ERROR_ICC_MUTE = -2,
+ ERROR_XFR_PARITY_ERROR = -3,
+ ERROR_XFR_OVERRUN = -4,
+ ERROR_HW_ERROR = -5,
+};
+
+/* 6.2.6 RDR_to_PC_SlotStatus definitions */
+enum {
+ CLOCK_STATUS_RUNNING = 0,
+ /*
+ * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H,
+ * 3 - unknown state. rest are RFU
+ */
+};
+
+typedef struct QEMU_PACKED CCID_Header {
+ uint8_t bMessageType;
+ uint32_t dwLength;
+ uint8_t bSlot;
+ uint8_t bSeq;
+} CCID_Header;
+
+typedef struct QEMU_PACKED CCID_BULK_IN {
+ CCID_Header hdr;
+ uint8_t bStatus; /* Only used in BULK_IN */
+ uint8_t bError; /* Only used in BULK_IN */
+} CCID_BULK_IN;
+
+typedef struct QEMU_PACKED CCID_SlotStatus {
+ CCID_BULK_IN b;
+ uint8_t bClockStatus;
+} CCID_SlotStatus;
+
+typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure {
+ uint8_t bmFindexDindex;
+ uint8_t bmTCCKST0;
+ uint8_t bGuardTimeT0;
+ uint8_t bWaitingIntegerT0;
+ uint8_t bClockStop;
+} CCID_T0ProtocolDataStructure;
+
+typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure {
+ uint8_t bmFindexDindex;
+ uint8_t bmTCCKST1;
+ uint8_t bGuardTimeT1;
+ uint8_t bWaitingIntegerT1;
+ uint8_t bClockStop;
+ uint8_t bIFSC;
+ uint8_t bNadValue;
+} CCID_T1ProtocolDataStructure;
+
+typedef union CCID_ProtocolDataStructure {
+ CCID_T0ProtocolDataStructure t0;
+ CCID_T1ProtocolDataStructure t1;
+ uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */
+} CCID_ProtocolDataStructure;
+
+typedef struct QEMU_PACKED CCID_Parameter {
+ CCID_BULK_IN b;
+ uint8_t bProtocolNum;
+ CCID_ProtocolDataStructure abProtocolDataStructure;
+} CCID_Parameter;
+
+typedef struct QEMU_PACKED CCID_DataBlock {
+ CCID_BULK_IN b;
+ uint8_t bChainParameter;
+ uint8_t abData[0];
+} CCID_DataBlock;
+
+/* 6.1.4 PC_to_RDR_XfrBlock */
+typedef struct QEMU_PACKED CCID_XferBlock {
+ CCID_Header hdr;
+ uint8_t bBWI; /* Block Waiting Timeout */
+ uint16_t wLevelParameter; /* XXX currently unused */
+ uint8_t abData[0];
+} CCID_XferBlock;
+
+typedef struct QEMU_PACKED CCID_IccPowerOn {
+ CCID_Header hdr;
+ uint8_t bPowerSelect;
+ uint16_t abRFU;
+} CCID_IccPowerOn;
+
+typedef struct QEMU_PACKED CCID_IccPowerOff {
+ CCID_Header hdr;
+ uint16_t abRFU;
+} CCID_IccPowerOff;
+
+typedef struct QEMU_PACKED CCID_SetParameters {
+ CCID_Header hdr;
+ uint8_t bProtocolNum;
+ uint16_t abRFU;
+ CCID_ProtocolDataStructure abProtocolDataStructure;
+} CCID_SetParameters;
+
+typedef struct CCID_Notify_Slot_Change {
+ uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */
+ uint8_t bmSlotICCState;
+} CCID_Notify_Slot_Change;
+
+/* used for DataBlock response to XferBlock */
+typedef struct Answer {
+ uint8_t slot;
+ uint8_t seq;
+} Answer;
+
+/* pending BULK_IN messages */
+typedef struct BulkIn {
+ uint8_t data[BULK_IN_BUF_SIZE];
+ uint32_t len;
+ uint32_t pos;
+} BulkIn;
+
+enum {
+ MIGRATION_NONE,
+ MIGRATION_MIGRATED,
+};
+
+typedef struct CCIDBus {
+ BusState qbus;
+} CCIDBus;
+
+/*
+ * powered - defaults to true, changed by PowerOn/PowerOff messages
+ */
+typedef struct USBCCIDState {
+ USBDevice dev;
+ USBEndpoint *intr;
+ USBEndpoint *bulk;
+ CCIDBus bus;
+ CCIDCardState *card;
+ BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */
+ uint32_t bulk_in_pending_start;
+ uint32_t bulk_in_pending_end; /* first free */
+ uint32_t bulk_in_pending_num;
+ BulkIn *current_bulk_in;
+ uint8_t bulk_out_data[BULK_OUT_DATA_SIZE];
+ uint32_t bulk_out_pos;
+ uint64_t last_answer_error;
+ Answer pending_answers[PENDING_ANSWERS_NUM];
+ uint32_t pending_answers_start;
+ uint32_t pending_answers_end;
+ uint32_t pending_answers_num;
+ uint8_t bError;
+ uint8_t bmCommandStatus;
+ uint8_t bProtocolNum;
+ CCID_ProtocolDataStructure abProtocolDataStructure;
+ uint32_t ulProtocolDataStructureSize;
+ uint32_t state_vmstate;
+ uint32_t migration_target_ip;
+ uint16_t migration_target_port;
+ uint8_t migration_state;
+ uint8_t bmSlotICCState;
+ uint8_t powered;
+ uint8_t notify_slot_change;
+ uint8_t debug;
+} USBCCIDState;
+
+/*
+ * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9,
+ * "USB Device Framework", section 9.6.1, in the Universal Serial Bus
+ * Specification.
+ *
+ * This device implemented based on the spec and with an Athena Smart Card
+ * Reader as reference:
+ * 0dc3:1004 Athena Smartcard Solutions, Inc.
+ */
+
+static const uint8_t qemu_ccid_descriptor[] = {
+ /* Smart Card Device Class Descriptor */
+ 0x36, /* u8 bLength; */
+ 0x21, /* u8 bDescriptorType; Functional */
+ 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */
+ 0x00, /*
+ * u8 bMaxSlotIndex; The index of the highest available
+ * slot on this device. All slots are consecutive starting
+ * at 00h.
+ */
+ 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
+
+ 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
+ 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
+ /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
+ 0xa0, 0x0f, 0x00, 0x00,
+ /* u32 dwMaximumClock; */
+ 0x00, 0x00, 0x01, 0x00,
+ 0x00, /* u8 bNumClockSupported; *
+ * 0 means just the default and max. */
+ /* u32 dwDataRate ;bps. 9600 == 00002580h */
+ 0x80, 0x25, 0x00, 0x00,
+ /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */
+ 0x00, 0xC2, 0x01, 0x00,
+ 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between
+ * default and max */
+ /* u32 dwMaxIFSD; *
+ * maximum IFSD supported by CCID for protocol *
+ * T=1 (Maximum seen from various cards) */
+ 0xfe, 0x00, 0x00, 0x00,
+ /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */
+ 0x00, 0x00, 0x00, 0x00,
+ /* u32 dwMechanical; 0 - no special characteristics. */
+ 0x00, 0x00, 0x00, 0x00,
+ /*
+ * u32 dwFeatures;
+ * 0 - No special characteristics
+ * + 2 Automatic parameter configuration based on ATR data
+ * + 4 Automatic activation of ICC on inserting
+ * + 8 Automatic ICC voltage selection
+ * + 10 Automatic ICC clock frequency change
+ * + 20 Automatic baud rate change
+ * + 40 Automatic parameters negotiation made by the CCID
+ * + 80 automatic PPS made by the CCID
+ * 100 CCID can set ICC in clock stop mode
+ * 200 NAD value other then 00 accepted (T=1 protocol)
+ * + 400 Automatic IFSD exchange as first exchange (T=1)
+ * One of the following only:
+ * + 10000 TPDU level exchanges with CCID
+ * 20000 Short APDU level exchange with CCID
+ * 40000 Short and Extended APDU level exchange with CCID
+ *
+ * 100000 USB Wake up signaling supported on card
+ * insertion and removal. Must set bit 5 in bmAttributes
+ * in Configuration descriptor if 100000 is set.
+ */
+ 0xfe, 0x04, 0x01, 0x00,
+ /*
+ * u32 dwMaxCCIDMessageLength; For extended APDU in
+ * [261 + 10 , 65544 + 10]. Otherwise the minimum is
+ * wMaxPacketSize of the Bulk-OUT endpoint
+ */
+ 0x12, 0x00, 0x01, 0x00,
+ 0xFF, /*
+ * u8 bClassGetResponse; Significant only for CCID that
+ * offers an APDU level for exchanges. Indicates the
+ * default class value used by the CCID when it sends a
+ * Get Response command to perform the transportation of
+ * an APDU by T=0 protocol
+ * FFh indicates that the CCID echos the class of the APDU.
+ */
+ 0xFF, /*
+ * u8 bClassEnvelope; EAPDU only. Envelope command for
+ * T=0
+ */
+ 0x00, 0x00, /*
+ * u16 wLcdLayout; XXYY Number of lines (XX) and chars per
+ * line for LCD display used for PIN entry. 0000 - no LCD
+ */
+ 0x01, /*
+ * u8 bPINSupport; 01h PIN Verification,
+ * 02h PIN Modification
+ */
+ 0x01, /* u8 bMaxCCIDBusySlots; */
+};
+
+enum {
+ STR_MANUFACTURER = 1,
+ STR_PRODUCT,
+ STR_SERIALNUMBER,
+ STR_INTERFACE,
+};
+
+static const USBDescStrings desc_strings = {
+ [STR_MANUFACTURER] = "QEMU",
+ [STR_PRODUCT] = "QEMU USB CCID",
+ [STR_SERIALNUMBER] = "1",
+ [STR_INTERFACE] = "CCID Interface",
+};
+
+static const USBDescIface desc_iface0 = {
+ .bInterfaceNumber = 0,
+ .bNumEndpoints = 3,
+ .bInterfaceClass = USB_CLASS_CSCID,
+ .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED,
+ .bInterfaceProtocol = 0x00,
+ .iInterface = STR_INTERFACE,
+ .ndesc = 1,
+ .descs = (USBDescOther[]) {
+ {
+ /* smartcard descriptor */
+ .data = qemu_ccid_descriptor,
+ },
+ },
+ .eps = (USBDescEndpoint[]) {
+ {
+ .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .bInterval = 255,
+ .wMaxPacketSize = 64,
+ },{
+ .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = 64,
+ },{
+ .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = 64,
+ },
+ }
+};
+
+static const USBDescDevice desc_device = {
+ .bcdUSB = 0x0110,
+ .bMaxPacketSize0 = 64,
+ .bNumConfigurations = 1,
+ .confs = (USBDescConfig[]) {
+ {
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER |
+ USB_CFG_ATT_WAKEUP,
+ .bMaxPower = 50,
+ .nif = 1,
+ .ifs = &desc_iface0,
+ },
+ },
+};
+
+static const USBDesc desc_ccid = {
+ .id = {
+ .idVendor = CCID_VENDOR_ID,
+ .idProduct = CCID_PRODUCT_ID,
+ .bcdDevice = CCID_DEVICE_VERSION,
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIALNUMBER,
+ },
+ .full = &desc_device,
+ .str = desc_strings,
+};
+
+static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len)
+{
+ CCIDCardClass *cc = CCID_CARD_GET_CLASS(card);
+
+ if (cc->get_atr) {
+ return cc->get_atr(card, len);
+ }
+ return NULL;
+}
+
+static void ccid_card_apdu_from_guest(CCIDCardState *card,
+ const uint8_t *apdu,
+ uint32_t len)
+{
+ CCIDCardClass *cc = CCID_CARD_GET_CLASS(card);
+
+ if (cc->apdu_from_guest) {
+ cc->apdu_from_guest(card, apdu, len);
+ }
+}
+
+static int ccid_card_exitfn(CCIDCardState *card)
+{
+ CCIDCardClass *cc = CCID_CARD_GET_CLASS(card);
+
+ if (cc->exitfn) {
+ return cc->exitfn(card);
+ }
+ return 0;
+}
+
+static int ccid_card_initfn(CCIDCardState *card)
+{
+ CCIDCardClass *cc = CCID_CARD_GET_CLASS(card);
+
+ if (cc->initfn) {
+ return cc->initfn(card);
+ }
+ return 0;
+}
+
+static bool ccid_has_pending_answers(USBCCIDState *s)
+{
+ return s->pending_answers_num > 0;
+}
+
+static void ccid_clear_pending_answers(USBCCIDState *s)
+{
+ s->pending_answers_num = 0;
+ s->pending_answers_start = 0;
+ s->pending_answers_end = 0;
+}
+
+static void ccid_print_pending_answers(USBCCIDState *s)
+{
+ Answer *answer;
+ int i, count;
+
+ DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:");
+ if (!ccid_has_pending_answers(s)) {
+ DPRINTF(s, D_VERBOSE, " empty\n");
+ return;
+ }
+ for (i = s->pending_answers_start, count = s->pending_answers_num ;
+ count > 0; count--, i++) {
+ answer = &s->pending_answers[i % PENDING_ANSWERS_NUM];
+ if (count == 1) {
+ DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq);
+ } else {
+ DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq);
+ }
+ }
+}
+
+static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr)
+{
+ Answer *answer;
+
+ assert(s->pending_answers_num < PENDING_ANSWERS_NUM);
+ s->pending_answers_num++;
+ answer =
+ &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM];
+ answer->slot = hdr->bSlot;
+ answer->seq = hdr->bSeq;
+ ccid_print_pending_answers(s);
+}
+
+static void ccid_remove_pending_answer(USBCCIDState *s,
+ uint8_t *slot, uint8_t *seq)
+{
+ Answer *answer;
+
+ assert(s->pending_answers_num > 0);
+ s->pending_answers_num--;
+ answer =
+ &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM];
+ *slot = answer->slot;
+ *seq = answer->seq;
+ ccid_print_pending_answers(s);
+}
+
+static void ccid_bulk_in_clear(USBCCIDState *s)
+{
+ s->bulk_in_pending_start = 0;
+ s->bulk_in_pending_end = 0;
+ s->bulk_in_pending_num = 0;
+}
+
+static void ccid_bulk_in_release(USBCCIDState *s)
+{
+ assert(s->current_bulk_in != NULL);
+ s->current_bulk_in->pos = 0;
+ s->current_bulk_in = NULL;
+}
+
+static void ccid_bulk_in_get(USBCCIDState *s)
+{
+ if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) {
+ return;
+ }
+ assert(s->bulk_in_pending_num > 0);
+ s->bulk_in_pending_num--;
+ s->current_bulk_in =
+ &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM];
+}
+
+static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len)
+{
+ BulkIn *bulk_in;
+
+ DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len);
+
+ /* look for an existing element */
+ if (len > BULK_IN_BUF_SIZE) {
+ DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). "
+ "discarding message.\n",
+ __func__, len, BULK_IN_BUF_SIZE);
+ return NULL;
+ }
+ if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) {
+ DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. "
+ "discarding message.\n", __func__);
+ return NULL;
+ }
+ bulk_in =
+ &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM];
+ s->bulk_in_pending_num++;
+ bulk_in->len = len;
+ return bulk_in->data;
+}
+
+static void ccid_reset(USBCCIDState *s)
+{
+ ccid_bulk_in_clear(s);
+ ccid_clear_pending_answers(s);
+}
+
+static void ccid_detach(USBCCIDState *s)
+{
+ ccid_reset(s);
+}
+
+static void ccid_handle_reset(USBDevice *dev)
+{
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ DPRINTF(s, 1, "Reset\n");
+
+ ccid_reset(s);
+}
+
+static const char *ccid_control_to_str(USBCCIDState *s, int request)
+{
+ switch (request) {
+ /* generic - should be factored out if there are other debugees */
+ case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+ return "(generic) set address";
+ case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+ return "(generic) get descriptor";
+ case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+ return "(generic) get configuration";
+ case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+ return "(generic) set configuration";
+ case DeviceRequest | USB_REQ_GET_STATUS:
+ return "(generic) get status";
+ case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+ return "(generic) clear feature";
+ case DeviceOutRequest | USB_REQ_SET_FEATURE:
+ return "(generic) set_feature";
+ case InterfaceRequest | USB_REQ_GET_INTERFACE:
+ return "(generic) get interface";
+ case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
+ return "(generic) set interface";
+ /* class requests */
+ case ClassInterfaceOutRequest | CCID_CONTROL_ABORT:
+ return "ABORT";
+ case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES:
+ return "GET_CLOCK_FREQUENCIES";
+ case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES:
+ return "GET_DATA_RATES";
+ }
+ return "unknown";
+}
+
+static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request,
+ int value, int index, int length, uint8_t *data)
+{
+ USBCCIDState *s = USB_CCID_DEV(dev);
+ int ret;
+
+ DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__,
+ ccid_control_to_str(s, request), request, value);
+ ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
+ if (ret >= 0) {
+ return;
+ }
+
+ switch (request) {
+ /* Class specific requests. */
+ case ClassInterfaceOutRequest | CCID_CONTROL_ABORT:
+ DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n");
+ p->status = USB_RET_STALL;
+ break;
+ case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES:
+ DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n");
+ p->status = USB_RET_STALL;
+ break;
+ case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES:
+ DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n");
+ p->status = USB_RET_STALL;
+ break;
+ default:
+ DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n",
+ request, value);
+ p->status = USB_RET_STALL;
+ break;
+ }
+}
+
+static bool ccid_card_inserted(USBCCIDState *s)
+{
+ return s->bmSlotICCState & SLOT_0_STATE_MASK;
+}
+
+static uint8_t ccid_card_status(USBCCIDState *s)
+{
+ return ccid_card_inserted(s)
+ ? (s->powered ?
+ ICC_STATUS_PRESENT_ACTIVE
+ : ICC_STATUS_PRESENT_INACTIVE
+ )
+ : ICC_STATUS_NOT_PRESENT;
+}
+
+static uint8_t ccid_calc_status(USBCCIDState *s)
+{
+ /*
+ * page 55, 6.2.6, calculation of bStatus from bmICCStatus and
+ * bmCommandStatus
+ */
+ uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6);
+ DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret);
+ return ret;
+}
+
+static void ccid_reset_error_status(USBCCIDState *s)
+{
+ s->bError = ERROR_CMD_NOT_SUPPORTED;
+ s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
+}
+
+static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv)
+{
+ CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus));
+ if (h == NULL) {
+ return;
+ }
+ h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus;
+ h->b.hdr.dwLength = 0;
+ h->b.hdr.bSlot = recv->bSlot;
+ h->b.hdr.bSeq = recv->bSeq;
+ h->b.bStatus = ccid_calc_status(s);
+ h->b.bError = s->bError;
+ h->bClockStatus = CLOCK_STATUS_RUNNING;
+ ccid_reset_error_status(s);
+ usb_wakeup(s->bulk, 0);
+}
+
+static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv)
+{
+ CCID_Parameter *h;
+ uint32_t len = s->ulProtocolDataStructureSize;
+
+ h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len);
+ if (h == NULL) {
+ return;
+ }
+ h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters;
+ h->b.hdr.dwLength = 0;
+ h->b.hdr.bSlot = recv->bSlot;
+ h->b.hdr.bSeq = recv->bSeq;
+ h->b.bStatus = ccid_calc_status(s);
+ h->b.bError = s->bError;
+ h->bProtocolNum = s->bProtocolNum;
+ h->abProtocolDataStructure = s->abProtocolDataStructure;
+ ccid_reset_error_status(s);
+ usb_wakeup(s->bulk, 0);
+}
+
+static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq,
+ const uint8_t *data, uint32_t len)
+{
+ CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len);
+
+ if (p == NULL) {
+ return;
+ }
+ p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock;
+ p->b.hdr.dwLength = cpu_to_le32(len);
+ p->b.hdr.bSlot = slot;
+ p->b.hdr.bSeq = seq;
+ p->b.bStatus = ccid_calc_status(s);
+ p->b.bError = s->bError;
+ if (p->b.bError) {
+ DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError);
+ }
+ memcpy(p->abData, data, len);
+ ccid_reset_error_status(s);
+ usb_wakeup(s->bulk, 0);
+}
+
+static void ccid_report_error_failed(USBCCIDState *s, uint8_t error)
+{
+ s->bmCommandStatus = COMMAND_STATUS_FAILED;
+ s->bError = error;
+}
+
+static void ccid_write_data_block_answer(USBCCIDState *s,
+ const uint8_t *data, uint32_t len)
+{
+ uint8_t seq;
+ uint8_t slot;
+
+ if (!ccid_has_pending_answers(s)) {
+ DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n");
+ ccid_report_error_failed(s, ERROR_ICC_MUTE);
+ return;
+ }
+ ccid_remove_pending_answer(s, &slot, &seq);
+ ccid_write_data_block(s, slot, seq, data, len);
+}
+
+static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len)
+{
+ int i;
+
+ if (len < 2 || !(atr[1] & 0x80)) {
+ /* too short or TD1 not included */
+ return 0; /* T=0, default */
+ }
+ i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40);
+ i += !!(atr[1] & 0x80);
+ return atr[i] & 0x0f;
+}
+
+static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv)
+{
+ const uint8_t *atr = NULL;
+ uint32_t len = 0;
+ uint8_t atr_protocol_num;
+ CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0;
+ CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1;
+
+ if (s->card) {
+ atr = ccid_card_get_atr(s->card, &len);
+ }
+ atr_protocol_num = atr_get_protocol_num(atr, len);
+ DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__,
+ atr_protocol_num);
+ /* set parameters from ATR - see spec page 109 */
+ s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num
+ : s->bProtocolNum);
+ switch (atr_protocol_num) {
+ case 0:
+ /* TODO: unimplemented ATR T0 parameters */
+ t0->bmFindexDindex = 0;
+ t0->bmTCCKST0 = 0;
+ t0->bGuardTimeT0 = 0;
+ t0->bWaitingIntegerT0 = 0;
+ t0->bClockStop = 0;
+ break;
+ case 1:
+ /* TODO: unimplemented ATR T1 parameters */
+ t1->bmFindexDindex = 0;
+ t1->bmTCCKST1 = 0;
+ t1->bGuardTimeT1 = 0;
+ t1->bWaitingIntegerT1 = 0;
+ t1->bClockStop = 0;
+ t1->bIFSC = 0;
+ t1->bNadValue = 0;
+ break;
+ default:
+ DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n",
+ __func__, atr_protocol_num);
+ }
+ ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len);
+}
+
+static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv)
+{
+ CCID_SetParameters *ph = (CCID_SetParameters *) recv;
+ uint32_t protocol_num = ph->bProtocolNum & 3;
+
+ if (protocol_num != 0 && protocol_num != 1) {
+ ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED);
+ return;
+ }
+ s->bProtocolNum = protocol_num;
+ s->abProtocolDataStructure = ph->abProtocolDataStructure;
+}
+
+/*
+ * must be 5 bytes for T=0, 7 bytes for T=1
+ * See page 52
+ */
+static const CCID_ProtocolDataStructure defaultProtocolDataStructure = {
+ .t1 = {
+ .bmFindexDindex = 0x77,
+ .bmTCCKST1 = 0x00,
+ .bGuardTimeT1 = 0x00,
+ .bWaitingIntegerT1 = 0x00,
+ .bClockStop = 0x00,
+ .bIFSC = 0xfe,
+ .bNadValue = 0x00,
+ }
+};
+
+static void ccid_reset_parameters(USBCCIDState *s)
+{
+ s->bProtocolNum = 0; /* T=0 */
+ s->abProtocolDataStructure = defaultProtocolDataStructure;
+}
+
+/* NOTE: only a single slot is supported (SLOT_0) */
+static void ccid_on_slot_change(USBCCIDState *s, bool full)
+{
+ /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */
+ uint8_t current = s->bmSlotICCState;
+ if (full) {
+ s->bmSlotICCState |= SLOT_0_STATE_MASK;
+ } else {
+ s->bmSlotICCState &= ~SLOT_0_STATE_MASK;
+ }
+ if (current != s->bmSlotICCState) {
+ s->bmSlotICCState |= SLOT_0_CHANGED_MASK;
+ }
+ s->notify_slot_change = true;
+ usb_wakeup(s->intr, 0);
+}
+
+static void ccid_write_data_block_error(
+ USBCCIDState *s, uint8_t slot, uint8_t seq)
+{
+ ccid_write_data_block(s, slot, seq, NULL, 0);
+}
+
+static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv)
+{
+ uint32_t len;
+
+ if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) {
+ DPRINTF(s, 1,
+ "usb-ccid: not sending apdu to client, no card connected\n");
+ ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq);
+ return;
+ }
+ len = le32_to_cpu(recv->hdr.dwLength);
+ DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__,
+ recv->hdr.bSeq, len);
+ ccid_add_pending_answer(s, (CCID_Header *)recv);
+ if (s->card) {
+ ccid_card_apdu_from_guest(s->card, recv->abData, len);
+ } else {
+ DPRINTF(s, D_WARN, "warning: discarded apdu\n");
+ }
+}
+
+static const char *ccid_message_type_to_str(uint8_t type)
+{
+ switch (type) {
+ case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort";
+ case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency:
+ return "SetDataRateAndClockFrequency";
+ }
+ return "unknown";
+}
+
+static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p)
+{
+ CCID_Header *ccid_header;
+
+ if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) {
+ p->status = USB_RET_STALL;
+ return;
+ }
+ ccid_header = (CCID_Header *)s->bulk_out_data;
+ usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size);
+ s->bulk_out_pos += p->iov.size;
+ if (p->iov.size == CCID_MAX_PACKET_SIZE) {
+ DPRINTF(s, D_VERBOSE,
+ "usb-ccid: bulk_in: expecting more packets (%zd/%d)\n",
+ p->iov.size, ccid_header->dwLength);
+ return;
+ }
+ if (s->bulk_out_pos < 10) {
+ DPRINTF(s, 1,
+ "%s: bad USB_TOKEN_OUT length, should be at least 10 bytes\n",
+ __func__);
+ } else {
+ DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__,
+ ccid_header->bMessageType,
+ ccid_message_type_to_str(ccid_header->bMessageType));
+ switch (ccid_header->bMessageType) {
+ case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus:
+ ccid_write_slot_status(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn:
+ DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__,
+ ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect);
+ s->powered = true;
+ if (!ccid_card_inserted(s)) {
+ ccid_report_error_failed(s, ERROR_ICC_MUTE);
+ }
+ /* atr is written regardless of error. */
+ ccid_write_data_block_atr(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff:
+ ccid_reset_error_status(s);
+ s->powered = false;
+ ccid_write_slot_status(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock:
+ ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters:
+ ccid_reset_error_status(s);
+ ccid_set_parameters(s, ccid_header);
+ ccid_write_parameters(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters:
+ ccid_reset_error_status(s);
+ ccid_reset_parameters(s);
+ ccid_write_parameters(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters:
+ ccid_reset_error_status(s);
+ ccid_write_parameters(s, ccid_header);
+ break;
+ case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical:
+ ccid_report_error_failed(s, 0);
+ ccid_write_slot_status(s, ccid_header);
+ break;
+ default:
+ DPRINTF(s, 1,
+ "handle_data: ERROR: unhandled message type %Xh\n",
+ ccid_header->bMessageType);
+ /*
+ * The caller is expecting the device to respond, tell it we
+ * don't support the operation.
+ */
+ ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED);
+ ccid_write_slot_status(s, ccid_header);
+ break;
+ }
+ }
+ s->bulk_out_pos = 0;
+}
+
+static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p)
+{
+ int len = 0;
+
+ ccid_bulk_in_get(s);
+ if (s->current_bulk_in != NULL) {
+ len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos,
+ p->iov.size);
+ usb_packet_copy(p, s->current_bulk_in->data +
+ s->current_bulk_in->pos, len);
+ s->current_bulk_in->pos += len;
+ if (s->current_bulk_in->pos == s->current_bulk_in->len) {
+ ccid_bulk_in_release(s);
+ }
+ } else {
+ /* return when device has no data - usb 2.0 spec Table 8-4 */
+ p->status = USB_RET_NAK;
+ }
+ if (len) {
+ DPRINTF(s, D_MORE_INFO,
+ "%s: %zd/%d req/act to guest (BULK_IN)\n",
+ __func__, p->iov.size, len);
+ }
+ if (len < p->iov.size) {
+ DPRINTF(s, 1,
+ "%s: returning short (EREMOTEIO) %d < %zd\n",
+ __func__, len, p->iov.size);
+ }
+}
+
+static void ccid_handle_data(USBDevice *dev, USBPacket *p)
+{
+ USBCCIDState *s = USB_CCID_DEV(dev);
+ uint8_t buf[2];
+
+ switch (p->pid) {
+ case USB_TOKEN_OUT:
+ ccid_handle_bulk_out(s, p);
+ break;
+
+ case USB_TOKEN_IN:
+ switch (p->ep->nr) {
+ case CCID_BULK_IN_EP:
+ ccid_bulk_in_copy_to_guest(s, p);
+ break;
+ case CCID_INT_IN_EP:
+ if (s->notify_slot_change) {
+ /* page 56, RDR_to_PC_NotifySlotChange */
+ buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange;
+ buf[1] = s->bmSlotICCState;
+ usb_packet_copy(p, buf, 2);
+ s->notify_slot_change = false;
+ s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK;
+ DPRINTF(s, D_INFO,
+ "handle_data: int_in: notify_slot_change %X, "
+ "requested len %zd\n",
+ s->bmSlotICCState, p->iov.size);
+ } else {
+ p->status = USB_RET_NAK;
+ }
+ break;
+ default:
+ DPRINTF(s, 1, "Bad endpoint\n");
+ p->status = USB_RET_STALL;
+ break;
+ }
+ break;
+ default:
+ DPRINTF(s, 1, "Bad token\n");
+ p->status = USB_RET_STALL;
+ break;
+ }
+}
+
+static void ccid_handle_destroy(USBDevice *dev)
+{
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ ccid_bulk_in_clear(s);
+}
+
+static void ccid_flush_pending_answers(USBCCIDState *s)
+{
+ while (ccid_has_pending_answers(s)) {
+ ccid_write_data_block_answer(s, NULL, 0);
+ }
+}
+
+static Answer *ccid_peek_next_answer(USBCCIDState *s)
+{
+ return s->pending_answers_num == 0
+ ? NULL
+ : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM];
+}
+
+static Property ccid_props[] = {
+ DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+#define TYPE_CCID_BUS "ccid-bus"
+#define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS)
+
+static const TypeInfo ccid_bus_info = {
+ .name = TYPE_CCID_BUS,
+ .parent = TYPE_BUS,
+ .instance_size = sizeof(CCIDBus),
+};
+
+void ccid_card_send_apdu_to_guest(CCIDCardState *card,
+ uint8_t *apdu, uint32_t len)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+ Answer *answer;
+
+ if (!ccid_has_pending_answers(s)) {
+ DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n");
+ return;
+ }
+ s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
+ answer = ccid_peek_next_answer(s);
+ if (answer == NULL) {
+ DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__);
+ ccid_report_error_failed(s, ERROR_HW_ERROR);
+ return;
+ }
+ DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n",
+ len, answer->seq, answer->slot);
+ ccid_write_data_block_answer(s, apdu, len);
+}
+
+void ccid_card_card_removed(CCIDCardState *card)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ ccid_on_slot_change(s, false);
+ ccid_flush_pending_answers(s);
+ ccid_reset(s);
+}
+
+int ccid_card_ccid_attach(CCIDCardState *card)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ DPRINTF(s, 1, "CCID Attach\n");
+ if (s->migration_state == MIGRATION_MIGRATED) {
+ s->migration_state = MIGRATION_NONE;
+ }
+ return 0;
+}
+
+void ccid_card_ccid_detach(CCIDCardState *card)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ DPRINTF(s, 1, "CCID Detach\n");
+ if (ccid_card_inserted(s)) {
+ ccid_on_slot_change(s, false);
+ }
+ ccid_detach(s);
+}
+
+void ccid_card_card_error(CCIDCardState *card, uint64_t error)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ s->bmCommandStatus = COMMAND_STATUS_FAILED;
+ s->last_answer_error = error;
+ DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error);
+ /* TODO: these errors should be more verbose and propagated to the guest.*/
+ /*
+ * We flush all pending answers on CardRemove message in ccid-card-passthru,
+ * so check that first to not trigger abort
+ */
+ if (ccid_has_pending_answers(s)) {
+ ccid_write_data_block_answer(s, NULL, 0);
+ }
+}
+
+void ccid_card_card_inserted(CCIDCardState *card)
+{
+ DeviceState *qdev = DEVICE(card);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
+ ccid_flush_pending_answers(s);
+ ccid_on_slot_change(s, true);
+}
+
+static int ccid_card_exit(DeviceState *qdev)
+{
+ int ret = 0;
+ CCIDCardState *card = CCID_CARD(qdev);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ if (ccid_card_inserted(s)) {
+ ccid_card_card_removed(card);
+ }
+ ret = ccid_card_exitfn(card);
+ s->card = NULL;
+ return ret;
+}
+
+static int ccid_card_init(DeviceState *qdev)
+{
+ CCIDCardState *card = CCID_CARD(qdev);
+ USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent);
+ USBCCIDState *s = USB_CCID_DEV(dev);
+ int ret = 0;
+
+ if (card->slot != 0) {
+ error_report("Warning: usb-ccid supports one slot, can't add %d",
+ card->slot);
+ return -1;
+ }
+ if (s->card != NULL) {
+ error_report("Warning: usb-ccid card already full, not adding");
+ return -1;
+ }
+ ret = ccid_card_initfn(card);
+ if (ret == 0) {
+ s->card = card;
+ }
+ return ret;
+}
+
+static void ccid_realize(USBDevice *dev, Error **errp)
+{
+ USBCCIDState *s = USB_CCID_DEV(dev);
+
+ usb_desc_create_serial(dev);
+ usb_desc_init(dev);
+ qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev),
+ NULL);
+ qbus_set_hotplug_handler(BUS(&s->bus), DEVICE(dev), &error_abort);
+ s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP);
+ s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP);
+ s->card = NULL;
+ s->migration_state = MIGRATION_NONE;
+ s->migration_target_ip = 0;
+ s->migration_target_port = 0;
+ s->dev.speed = USB_SPEED_FULL;
+ s->dev.speedmask = USB_SPEED_MASK_FULL;
+ s->notify_slot_change = false;
+ s->powered = true;
+ s->pending_answers_num = 0;
+ s->last_answer_error = 0;
+ s->bulk_in_pending_start = 0;
+ s->bulk_in_pending_end = 0;
+ s->current_bulk_in = NULL;
+ ccid_reset_error_status(s);
+ s->bulk_out_pos = 0;
+ ccid_reset_parameters(s);
+ ccid_reset(s);
+ s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug);
+}
+
+static int ccid_post_load(void *opaque, int version_id)
+{
+ USBCCIDState *s = opaque;
+
+ /*
+ * This must be done after usb_device_attach, which sets state to ATTACHED,
+ * while it must be DEFAULT in order to accept packets (like it is after
+ * reset, but reset will reset our addr and call our reset handler which
+ * may change state, and we don't want to do that when migrating).
+ */
+ s->dev.state = s->state_vmstate;
+ return 0;
+}
+
+static void ccid_pre_save(void *opaque)
+{
+ USBCCIDState *s = opaque;
+
+ s->state_vmstate = s->dev.state;
+ if (s->dev.attached) {
+ /*
+ * Migrating an open device, ignore reconnection CHR_EVENT to avoid an
+ * erroneous detach.
+ */
+ s->migration_state = MIGRATION_MIGRATED;
+ }
+}
+
+static VMStateDescription bulk_in_vmstate = {
+ .name = "CCID BulkIn state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_BUFFER(data, BulkIn),
+ VMSTATE_UINT32(len, BulkIn),
+ VMSTATE_UINT32(pos, BulkIn),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static VMStateDescription answer_vmstate = {
+ .name = "CCID Answer state",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(slot, Answer),
+ VMSTATE_UINT8(seq, Answer),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static VMStateDescription usb_device_vmstate = {
+ .name = "usb_device",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_UINT8(addr, USBDevice),
+ VMSTATE_BUFFER(setup_buf, USBDevice),
+ VMSTATE_BUFFER(data_buf, USBDevice),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static VMStateDescription ccid_vmstate = {
+ .name = "usb-ccid",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .post_load = ccid_post_load,
+ .pre_save = ccid_pre_save,
+ .fields = (VMStateField[]) {
+ VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice),
+ VMSTATE_UINT8(debug, USBCCIDState),
+ VMSTATE_BUFFER(bulk_out_data, USBCCIDState),
+ VMSTATE_UINT32(bulk_out_pos, USBCCIDState),
+ VMSTATE_UINT8(bmSlotICCState, USBCCIDState),
+ VMSTATE_UINT8(powered, USBCCIDState),
+ VMSTATE_UINT8(notify_slot_change, USBCCIDState),
+ VMSTATE_UINT64(last_answer_error, USBCCIDState),
+ VMSTATE_UINT8(bError, USBCCIDState),
+ VMSTATE_UINT8(bmCommandStatus, USBCCIDState),
+ VMSTATE_UINT8(bProtocolNum, USBCCIDState),
+ VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState),
+ VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState),
+ VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState,
+ BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn),
+ VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState),
+ VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState),
+ VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState,
+ PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer),
+ VMSTATE_UINT32(pending_answers_num, USBCCIDState),
+ VMSTATE_UINT8(migration_state, USBCCIDState),
+ VMSTATE_UINT32(state_vmstate, USBCCIDState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static Property ccid_properties[] = {
+ DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void ccid_class_initfn(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
+ HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass);
+
+ uc->realize = ccid_realize;
+ uc->product_desc = "QEMU USB CCID";
+ uc->usb_desc = &desc_ccid;
+ uc->handle_reset = ccid_handle_reset;
+ uc->handle_control = ccid_handle_control;
+ uc->handle_data = ccid_handle_data;
+ uc->handle_destroy = ccid_handle_destroy;
+ dc->desc = "CCID Rev 1.1 smartcard reader";
+ dc->vmsd = &ccid_vmstate;
+ dc->props = ccid_properties;
+ set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+ hc->unplug = qdev_simple_device_unplug_cb;
+}
+
+static const TypeInfo ccid_info = {
+ .name = CCID_DEV_NAME,
+ .parent = TYPE_USB_DEVICE,
+ .instance_size = sizeof(USBCCIDState),
+ .class_init = ccid_class_initfn,
+ .interfaces = (InterfaceInfo[]) {
+ { TYPE_HOTPLUG_HANDLER },
+ { }
+ }
+};
+
+static void ccid_card_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *k = DEVICE_CLASS(klass);
+ k->bus_type = TYPE_CCID_BUS;
+ k->init = ccid_card_init;
+ k->exit = ccid_card_exit;
+ k->props = ccid_props;
+}
+
+static const TypeInfo ccid_card_type_info = {
+ .name = TYPE_CCID_CARD,
+ .parent = TYPE_DEVICE,
+ .instance_size = sizeof(CCIDCardState),
+ .abstract = true,
+ .class_size = sizeof(CCIDCardClass),
+ .class_init = ccid_card_class_init,
+};
+
+static void ccid_register_types(void)
+{
+ type_register_static(&ccid_bus_info);
+ type_register_static(&ccid_card_type_info);
+ type_register_static(&ccid_info);
+ usb_legacy_register(CCID_DEV_NAME, "ccid", NULL);
+}
+
+type_init(ccid_register_types)