Merge "These changes are the raw update to qemu-2.6."

1 files changed, 449 insertions, 0 deletions

diff --git a/qemu/hw/timer/aspeed_timer.c b/qemu/hw/timer/aspeed_timer.c
new file mode 100644
index 000000000..51e8303cd
--- /dev/null
+++ b/qemu/hw/timer/aspeed_timer.c
@@ -0,0 +1,449 @@
+/*
+ * ASPEED AST2400 Timer
+ *
+ * Andrew Jeffery <andrew@aj.id.au>
+ *
+ * Copyright (C) 2016 IBM Corp.
+ *
+ * This code is licensed under the GPL version 2 or later.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/ptimer.h"
+#include "hw/sysbus.h"
+#include "hw/timer/aspeed_timer.h"
+#include "qemu-common.h"
+#include "qemu/bitops.h"
+#include "qemu/main-loop.h"
+#include "qemu/timer.h"
+#include "trace.h"
+
+#define TIMER_NR_REGS 4
+
+#define TIMER_CTRL_BITS 4
+#define TIMER_CTRL_MASK ((1 << TIMER_CTRL_BITS) - 1)
+
+#define TIMER_CLOCK_USE_EXT true
+#define TIMER_CLOCK_EXT_HZ 1000000
+#define TIMER_CLOCK_USE_APB false
+#define TIMER_CLOCK_APB_HZ 24000000
+
+#define TIMER_REG_STATUS 0
+#define TIMER_REG_RELOAD 1
+#define TIMER_REG_MATCH_FIRST 2
+#define TIMER_REG_MATCH_SECOND 3
+
+#define TIMER_FIRST_CAP_PULSE 4
+
+enum timer_ctrl_op {
+    op_enable = 0,
+    op_external_clock,
+    op_overflow_interrupt,
+    op_pulse_enable
+};
+
+/**
+ * Avoid mutual references between AspeedTimerCtrlState and AspeedTimer
+ * structs, as it's a waste of memory. The ptimer BH callback needs to know
+ * whether a specific AspeedTimer is enabled, but this information is held in
+ * AspeedTimerCtrlState. So, provide a helper to hoist ourselves from an
+ * arbitrary AspeedTimer to AspeedTimerCtrlState.
+ */
+static inline AspeedTimerCtrlState *timer_to_ctrl(AspeedTimer *t)
+{
+    const AspeedTimer (*timers)[] = (void *)t - (t->id * sizeof(*t));
+    return container_of(timers, AspeedTimerCtrlState, timers);
+}
+
+static inline bool timer_ctrl_status(AspeedTimer *t, enum timer_ctrl_op op)
+{
+    return !!(timer_to_ctrl(t)->ctrl & BIT(t->id * TIMER_CTRL_BITS + op));
+}
+
+static inline bool timer_enabled(AspeedTimer *t)
+{
+    return timer_ctrl_status(t, op_enable);
+}
+
+static inline bool timer_overflow_interrupt(AspeedTimer *t)
+{
+    return timer_ctrl_status(t, op_overflow_interrupt);
+}
+
+static inline bool timer_can_pulse(AspeedTimer *t)
+{
+    return t->id >= TIMER_FIRST_CAP_PULSE;
+}
+
+static void aspeed_timer_expire(void *opaque)
+{
+    AspeedTimer *t = opaque;
+
+    /* Only support interrupts on match values of zero for the moment - this is
+     * sufficient to boot an aspeed_defconfig Linux kernel.
+     *
+     * TODO: matching on arbitrary values (see e.g. hw/timer/a9gtimer.c)
+     */
+    bool match = !(t->match[0] && t->match[1]);
+    bool interrupt = timer_overflow_interrupt(t) || match;
+    if (timer_enabled(t) && interrupt) {
+        t->level = !t->level;
+        qemu_set_irq(t->irq, t->level);
+    }
+}
+
+static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg)
+{
+    uint64_t value;
+
+    switch (reg) {
+    case TIMER_REG_STATUS:
+        value = ptimer_get_count(t->timer);
+        break;
+    case TIMER_REG_RELOAD:
+        value = t->reload;
+        break;
+    case TIMER_REG_MATCH_FIRST:
+    case TIMER_REG_MATCH_SECOND:
+        value = t->match[reg - 2];
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "%s: Programming error: unexpected reg: %d\n",
+                      __func__, reg);
+        value = 0;
+        break;
+    }
+    return value;
+}
+
+static uint64_t aspeed_timer_read(void *opaque, hwaddr offset, unsigned size)
+{
+    AspeedTimerCtrlState *s = opaque;
+    const int reg = (offset & 0xf) / 4;
+    uint64_t value;
+
+    switch (offset) {
+    case 0x30: /* Control Register */
+        value = s->ctrl;
+        break;
+    case 0x34: /* Control Register 2 */
+        value = s->ctrl2;
+        break;
+    case 0x00 ... 0x2c: /* Timers 1 - 4 */
+        value = aspeed_timer_get_value(&s->timers[(offset >> 4)], reg);
+        break;
+    case 0x40 ... 0x8c: /* Timers 5 - 8 */
+        value = aspeed_timer_get_value(&s->timers[(offset >> 4) - 1], reg);
+        break;
+    /* Illegal */
+    case 0x38:
+    case 0x3C:
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        value = 0;
+        break;
+    }
+    trace_aspeed_timer_read(offset, size, value);
+    return value;
+}
+
+static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg,
+                                   uint32_t value)
+{
+    AspeedTimer *t;
+
+    trace_aspeed_timer_set_value(timer, reg, value);
+    t = &s->timers[timer];
+    switch (reg) {
+    case TIMER_REG_STATUS:
+        if (timer_enabled(t)) {
+            ptimer_set_count(t->timer, value);
+        }
+        break;
+    case TIMER_REG_RELOAD:
+        t->reload = value;
+        ptimer_set_limit(t->timer, value, 1);
+        break;
+    case TIMER_REG_MATCH_FIRST:
+    case TIMER_REG_MATCH_SECOND:
+        if (value) {
+            /* Non-zero match values are unsupported. As such an interrupt will
+             * always be triggered when the timer reaches zero even if the
+             * overflow interrupt control bit is clear.
+             */
+            qemu_log_mask(LOG_UNIMP, "%s: Match value unsupported by device: "
+                    "0x%" PRIx32 "\n", __func__, value);
+        } else {
+            t->match[reg - 2] = value;
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "%s: Programming error: unexpected reg: %d\n",
+                      __func__, reg);
+        break;
+    }
+}
+
+/* Control register operations are broken out into helpers that can be
+ * explictly called on aspeed_timer_reset(), but also from
+ * aspeed_timer_ctrl_op().
+ */
+
+static void aspeed_timer_ctrl_enable(AspeedTimer *t, bool enable)
+{
+    trace_aspeed_timer_ctrl_enable(t->id, enable);
+    if (enable) {
+        ptimer_run(t->timer, 0);
+    } else {
+        ptimer_stop(t->timer);
+        ptimer_set_limit(t->timer, t->reload, 1);
+    }
+}
+
+static void aspeed_timer_ctrl_external_clock(AspeedTimer *t, bool enable)
+{
+    trace_aspeed_timer_ctrl_external_clock(t->id, enable);
+    if (enable) {
+        ptimer_set_freq(t->timer, TIMER_CLOCK_EXT_HZ);
+    } else {
+        ptimer_set_freq(t->timer, TIMER_CLOCK_APB_HZ);
+    }
+}
+
+static void aspeed_timer_ctrl_overflow_interrupt(AspeedTimer *t, bool enable)
+{
+    trace_aspeed_timer_ctrl_overflow_interrupt(t->id, enable);
+}
+
+static void aspeed_timer_ctrl_pulse_enable(AspeedTimer *t, bool enable)
+{
+    if (timer_can_pulse(t)) {
+        trace_aspeed_timer_ctrl_pulse_enable(t->id, enable);
+    } else {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                "%s: Timer does not support pulse mode\n", __func__);
+    }
+}
+
+/**
+ * Given the actions are fixed in number and completely described in helper
+ * functions, dispatch with a lookup table rather than manage control flow with
+ * a switch statement.
+ */
+static void (*const ctrl_ops[])(AspeedTimer *, bool) = {
+    [op_enable] = aspeed_timer_ctrl_enable,
+    [op_external_clock] = aspeed_timer_ctrl_external_clock,
+    [op_overflow_interrupt] = aspeed_timer_ctrl_overflow_interrupt,
+    [op_pulse_enable] = aspeed_timer_ctrl_pulse_enable,
+};
+
+/**
+ * Conditionally affect changes chosen by a timer's control bit.
+ *
+ * The aspeed_timer_ctrl_op() interface is convenient for the
+ * aspeed_timer_set_ctrl() function as the "no change" early exit can be
+ * calculated for all operations, which cleans up the caller code. However the
+ * interface isn't convenient for the reset function where we want to enter a
+ * specific state without artificially constructing old and new values that
+ * will fall through the change guard (and motivates extracting the actions
+ * out to helper functions).
+ *
+ * @t: The timer to manipulate
+ * @op: The type of operation to be performed
+ * @old: The old state of the timer's control bits
+ * @new: The incoming state for the timer's control bits
+ */
+static void aspeed_timer_ctrl_op(AspeedTimer *t, enum timer_ctrl_op op,
+                                 uint8_t old, uint8_t new)
+{
+    const uint8_t mask = BIT(op);
+    const bool enable = !!(new & mask);
+    const bool changed = ((old ^ new) & mask);
+    if (!changed) {
+        return;
+    }
+    ctrl_ops[op](t, enable);
+}
+
+static void aspeed_timer_set_ctrl(AspeedTimerCtrlState *s, uint32_t reg)
+{
+    int i;
+    int shift;
+    uint8_t t_old, t_new;
+    AspeedTimer *t;
+    const uint8_t enable_mask = BIT(op_enable);
+
+    /* Handle a dependency between the 'enable' and remaining three
+     * configuration bits - i.e. if more than one bit in the control set has
+     * changed, including the 'enable' bit, then we want either disable the
+     * timer and perform configuration, or perform configuration and then
+     * enable the timer
+     */
+    for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+        t = &s->timers[i];
+        shift = (i * TIMER_CTRL_BITS);
+        t_old = (s->ctrl >> shift) & TIMER_CTRL_MASK;
+        t_new = (reg >> shift) & TIMER_CTRL_MASK;
+
+        /* If we are disabling, do so first */
+        if ((t_old & enable_mask) && !(t_new & enable_mask)) {
+            aspeed_timer_ctrl_enable(t, false);
+        }
+        aspeed_timer_ctrl_op(t, op_external_clock, t_old, t_new);
+        aspeed_timer_ctrl_op(t, op_overflow_interrupt, t_old, t_new);
+        aspeed_timer_ctrl_op(t, op_pulse_enable, t_old, t_new);
+        /* If we are enabling, do so last */
+        if (!(t_old & enable_mask) && (t_new & enable_mask)) {
+            aspeed_timer_ctrl_enable(t, true);
+        }
+    }
+    s->ctrl = reg;
+}
+
+static void aspeed_timer_set_ctrl2(AspeedTimerCtrlState *s, uint32_t value)
+{
+    trace_aspeed_timer_set_ctrl2(value);
+}
+
+static void aspeed_timer_write(void *opaque, hwaddr offset, uint64_t value,
+                               unsigned size)
+{
+    const uint32_t tv = (uint32_t)(value & 0xFFFFFFFF);
+    const int reg = (offset & 0xf) / 4;
+    AspeedTimerCtrlState *s = opaque;
+
+    switch (offset) {
+    /* Control Registers */
+    case 0x30:
+        aspeed_timer_set_ctrl(s, tv);
+        break;
+    case 0x34:
+        aspeed_timer_set_ctrl2(s, tv);
+        break;
+    /* Timer Registers */
+    case 0x00 ... 0x2c:
+        aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS), reg, tv);
+        break;
+    case 0x40 ... 0x8c:
+        aspeed_timer_set_value(s, (offset >> TIMER_NR_REGS) - 1, reg, tv);
+        break;
+    /* Illegal */
+    case 0x38:
+    case 0x3C:
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIx "\n",
+                __func__, offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps aspeed_timer_ops = {
+    .read = aspeed_timer_read,
+    .write = aspeed_timer_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid.min_access_size = 4,
+    .valid.max_access_size = 4,
+    .valid.unaligned = false,
+};
+
+static void aspeed_init_one_timer(AspeedTimerCtrlState *s, uint8_t id)
+{
+    QEMUBH *bh;
+    AspeedTimer *t = &s->timers[id];
+
+    t->id = id;
+    bh = qemu_bh_new(aspeed_timer_expire, t);
+    t->timer = ptimer_init(bh);
+}
+
+static void aspeed_timer_realize(DeviceState *dev, Error **errp)
+{
+    int i;
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+    AspeedTimerCtrlState *s = ASPEED_TIMER(dev);
+
+    for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+        aspeed_init_one_timer(s, i);
+        sysbus_init_irq(sbd, &s->timers[i].irq);
+    }
+    memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_timer_ops, s,
+                          TYPE_ASPEED_TIMER, 0x1000);
+    sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void aspeed_timer_reset(DeviceState *dev)
+{
+    int i;
+    AspeedTimerCtrlState *s = ASPEED_TIMER(dev);
+
+    for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
+        AspeedTimer *t = &s->timers[i];
+        /* Explictly call helpers to avoid any conditional behaviour through
+         * aspeed_timer_set_ctrl().
+         */
+        aspeed_timer_ctrl_enable(t, false);
+        aspeed_timer_ctrl_external_clock(t, TIMER_CLOCK_USE_APB);
+        aspeed_timer_ctrl_overflow_interrupt(t, false);
+        aspeed_timer_ctrl_pulse_enable(t, false);
+        t->level = 0;
+        t->reload = 0;
+        t->match[0] = 0;
+        t->match[1] = 0;
+    }
+    s->ctrl = 0;
+    s->ctrl2 = 0;
+}
+
+static const VMStateDescription vmstate_aspeed_timer = {
+    .name = "aspeed.timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(id, AspeedTimer),
+        VMSTATE_INT32(level, AspeedTimer),
+        VMSTATE_PTIMER(timer, AspeedTimer),
+        VMSTATE_UINT32(reload, AspeedTimer),
+        VMSTATE_UINT32_ARRAY(match, AspeedTimer, 2),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static const VMStateDescription vmstate_aspeed_timer_state = {
+    .name = "aspeed.timerctrl",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(ctrl, AspeedTimerCtrlState),
+        VMSTATE_UINT32(ctrl2, AspeedTimerCtrlState),
+        VMSTATE_STRUCT_ARRAY(timers, AspeedTimerCtrlState,
+                             ASPEED_TIMER_NR_TIMERS, 1, vmstate_aspeed_timer,
+                             AspeedTimer),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void timer_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = aspeed_timer_realize;
+    dc->reset = aspeed_timer_reset;
+    dc->desc = "ASPEED Timer";
+    dc->vmsd = &vmstate_aspeed_timer_state;
+}
+
+static const TypeInfo aspeed_timer_info = {
+    .name = TYPE_ASPEED_TIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(AspeedTimerCtrlState),
+    .class_init = timer_class_init,
+};
+
+static void aspeed_timer_register_types(void)
+{
+    type_register_static(&aspeed_timer_info);
+}
+
+type_init(aspeed_timer_register_types)