Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 326 insertions, 0 deletions

diff --git a/qemu/hw/ssi/pl022.c b/qemu/hw/ssi/pl022.c
new file mode 100644
index 000000000..61d568f36
--- /dev/null
+++ b/qemu/hw/ssi/pl022.c
@@ -0,0 +1,326 @@
+/*
+ * Arm PrimeCell PL022 Synchronous Serial Port
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GPL.
+ */
+
+#include "hw/sysbus.h"
+#include "hw/ssi.h"
+
+//#define DEBUG_PL022 1
+
+#ifdef DEBUG_PL022
+#define DPRINTF(fmt, ...) \
+do { printf("pl022: " fmt , ## __VA_ARGS__); } while (0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "pl022: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
+#else
+#define DPRINTF(fmt, ...) do {} while(0)
+#define BADF(fmt, ...) \
+do { fprintf(stderr, "pl022: error: " fmt , ## __VA_ARGS__);} while (0)
+#endif
+
+#define PL022_CR1_LBM 0x01
+#define PL022_CR1_SSE 0x02
+#define PL022_CR1_MS  0x04
+#define PL022_CR1_SDO 0x08
+
+#define PL022_SR_TFE  0x01
+#define PL022_SR_TNF  0x02
+#define PL022_SR_RNE  0x04
+#define PL022_SR_RFF  0x08
+#define PL022_SR_BSY  0x10
+
+#define PL022_INT_ROR 0x01
+#define PL022_INT_RT  0x04
+#define PL022_INT_RX  0x04
+#define PL022_INT_TX  0x08
+
+#define TYPE_PL022 "pl022"
+#define PL022(obj) OBJECT_CHECK(PL022State, (obj), TYPE_PL022)
+
+typedef struct PL022State {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    uint32_t cr0;
+    uint32_t cr1;
+    uint32_t bitmask;
+    uint32_t sr;
+    uint32_t cpsr;
+    uint32_t is;
+    uint32_t im;
+    /* The FIFO head points to the next empty entry.  */
+    int tx_fifo_head;
+    int rx_fifo_head;
+    int tx_fifo_len;
+    int rx_fifo_len;
+    uint16_t tx_fifo[8];
+    uint16_t rx_fifo[8];
+    qemu_irq irq;
+    SSIBus *ssi;
+} PL022State;
+
+static const unsigned char pl022_id[8] =
+  { 0x22, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+
+static void pl022_update(PL022State *s)
+{
+    s->sr = 0;
+    if (s->tx_fifo_len == 0)
+        s->sr |= PL022_SR_TFE;
+    if (s->tx_fifo_len != 8)
+        s->sr |= PL022_SR_TNF;
+    if (s->rx_fifo_len != 0)
+        s->sr |= PL022_SR_RNE;
+    if (s->rx_fifo_len == 8)
+        s->sr |= PL022_SR_RFF;
+    if (s->tx_fifo_len)
+        s->sr |= PL022_SR_BSY;
+    s->is = 0;
+    if (s->rx_fifo_len >= 4)
+        s->is |= PL022_INT_RX;
+    if (s->tx_fifo_len <= 4)
+        s->is |= PL022_INT_TX;
+
+    qemu_set_irq(s->irq, (s->is & s->im) != 0);
+}
+
+static void pl022_xfer(PL022State *s)
+{
+    int i;
+    int o;
+    int val;
+
+    if ((s->cr1 & PL022_CR1_SSE) == 0) {
+        pl022_update(s);
+        DPRINTF("Disabled\n");
+        return;
+    }
+
+    DPRINTF("Maybe xfer %d/%d\n", s->tx_fifo_len, s->rx_fifo_len);
+    i = (s->tx_fifo_head - s->tx_fifo_len) & 7;
+    o = s->rx_fifo_head;
+    /* ??? We do not emulate the line speed.
+       This may break some applications.  The are two problematic cases:
+        (a) A driver feeds data into the TX FIFO until it is full,
+         and only then drains the RX FIFO.  On real hardware the CPU can
+         feed data fast enough that the RX fifo never gets chance to overflow.
+        (b) A driver transmits data, deliberately allowing the RX FIFO to
+         overflow because it ignores the RX data anyway.
+
+       We choose to support (a) by stalling the transmit engine if it would
+       cause the RX FIFO to overflow.  In practice much transmit-only code
+       falls into (a) because it flushes the RX FIFO to determine when
+       the transfer has completed.  */
+    while (s->tx_fifo_len && s->rx_fifo_len < 8) {
+        DPRINTF("xfer\n");
+        val = s->tx_fifo[i];
+        if (s->cr1 & PL022_CR1_LBM) {
+            /* Loopback mode.  */
+        } else {
+            val = ssi_transfer(s->ssi, val);
+        }
+        s->rx_fifo[o] = val & s->bitmask;
+        i = (i + 1) & 7;
+        o = (o + 1) & 7;
+        s->tx_fifo_len--;
+        s->rx_fifo_len++;
+    }
+    s->rx_fifo_head = o;
+    pl022_update(s);
+}
+
+static uint64_t pl022_read(void *opaque, hwaddr offset,
+                           unsigned size)
+{
+    PL022State *s = (PL022State *)opaque;
+    int val;
+
+    if (offset >= 0xfe0 && offset < 0x1000) {
+        return pl022_id[(offset - 0xfe0) >> 2];
+    }
+    switch (offset) {
+    case 0x00: /* CR0 */
+      return s->cr0;
+    case 0x04: /* CR1 */
+      return s->cr1;
+    case 0x08: /* DR */
+        if (s->rx_fifo_len) {
+            val = s->rx_fifo[(s->rx_fifo_head - s->rx_fifo_len) & 7];
+            DPRINTF("RX %02x\n", val);
+            s->rx_fifo_len--;
+            pl022_xfer(s);
+        } else {
+            val = 0;
+        }
+        return val;
+    case 0x0c: /* SR */
+        return s->sr;
+    case 0x10: /* CPSR */
+        return s->cpsr;
+    case 0x14: /* IMSC */
+        return s->im;
+    case 0x18: /* RIS */
+        return s->is;
+    case 0x1c: /* MIS */
+        return s->im & s->is;
+    case 0x20: /* DMACR */
+        /* Not implemented.  */
+        return 0;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl022_read: Bad offset %x\n", (int)offset);
+        return 0;
+    }
+}
+
+static void pl022_write(void *opaque, hwaddr offset,
+                        uint64_t value, unsigned size)
+{
+    PL022State *s = (PL022State *)opaque;
+
+    switch (offset) {
+    case 0x00: /* CR0 */
+        s->cr0 = value;
+        /* Clock rate and format are ignored.  */
+        s->bitmask = (1 << ((value & 15) + 1)) - 1;
+        break;
+    case 0x04: /* CR1 */
+        s->cr1 = value;
+        if ((s->cr1 & (PL022_CR1_MS | PL022_CR1_SSE))
+                   == (PL022_CR1_MS | PL022_CR1_SSE)) {
+            BADF("SPI slave mode not implemented\n");
+        }
+        pl022_xfer(s);
+        break;
+    case 0x08: /* DR */
+        if (s->tx_fifo_len < 8) {
+            DPRINTF("TX %02x\n", (unsigned)value);
+            s->tx_fifo[s->tx_fifo_head] = value & s->bitmask;
+            s->tx_fifo_head = (s->tx_fifo_head + 1) & 7;
+            s->tx_fifo_len++;
+            pl022_xfer(s);
+        }
+        break;
+    case 0x10: /* CPSR */
+        /* Prescaler.  Ignored.  */
+        s->cpsr = value & 0xff;
+        break;
+    case 0x14: /* IMSC */
+        s->im = value;
+        pl022_update(s);
+        break;
+    case 0x20: /* DMACR */
+        if (value) {
+            qemu_log_mask(LOG_UNIMP, "pl022: DMA not implemented\n");
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl022_write: Bad offset %x\n", (int)offset);
+    }
+}
+
+static void pl022_reset(PL022State *s)
+{
+    s->rx_fifo_len = 0;
+    s->tx_fifo_len = 0;
+    s->im = 0;
+    s->is = PL022_INT_TX;
+    s->sr = PL022_SR_TFE | PL022_SR_TNF;
+}
+
+static const MemoryRegionOps pl022_ops = {
+    .read = pl022_read,
+    .write = pl022_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int pl022_post_load(void *opaque, int version_id)
+{
+    PL022State *s = opaque;
+
+    if (s->tx_fifo_head < 0 ||
+        s->tx_fifo_head >= ARRAY_SIZE(s->tx_fifo) ||
+        s->rx_fifo_head < 0 ||
+        s->rx_fifo_head >= ARRAY_SIZE(s->rx_fifo)) {
+        return -1;
+    }
+    return 0;
+}
+
+static const VMStateDescription vmstate_pl022 = {
+    .name = "pl022_ssp",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .post_load = pl022_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cr0, PL022State),
+        VMSTATE_UINT32(cr1, PL022State),
+        VMSTATE_UINT32(bitmask, PL022State),
+        VMSTATE_UINT32(sr, PL022State),
+        VMSTATE_UINT32(cpsr, PL022State),
+        VMSTATE_UINT32(is, PL022State),
+        VMSTATE_UINT32(im, PL022State),
+        VMSTATE_INT32(tx_fifo_head, PL022State),
+        VMSTATE_INT32(rx_fifo_head, PL022State),
+        VMSTATE_INT32(tx_fifo_len, PL022State),
+        VMSTATE_INT32(rx_fifo_len, PL022State),
+        VMSTATE_UINT16(tx_fifo[0], PL022State),
+        VMSTATE_UINT16(rx_fifo[0], PL022State),
+        VMSTATE_UINT16(tx_fifo[1], PL022State),
+        VMSTATE_UINT16(rx_fifo[1], PL022State),
+        VMSTATE_UINT16(tx_fifo[2], PL022State),
+        VMSTATE_UINT16(rx_fifo[2], PL022State),
+        VMSTATE_UINT16(tx_fifo[3], PL022State),
+        VMSTATE_UINT16(rx_fifo[3], PL022State),
+        VMSTATE_UINT16(tx_fifo[4], PL022State),
+        VMSTATE_UINT16(rx_fifo[4], PL022State),
+        VMSTATE_UINT16(tx_fifo[5], PL022State),
+        VMSTATE_UINT16(rx_fifo[5], PL022State),
+        VMSTATE_UINT16(tx_fifo[6], PL022State),
+        VMSTATE_UINT16(rx_fifo[6], PL022State),
+        VMSTATE_UINT16(tx_fifo[7], PL022State),
+        VMSTATE_UINT16(rx_fifo[7], PL022State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static int pl022_init(SysBusDevice *sbd)
+{
+    DeviceState *dev = DEVICE(sbd);
+    PL022State *s = PL022(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &pl022_ops, s, "pl022", 0x1000);
+    sysbus_init_mmio(sbd, &s->iomem);
+    sysbus_init_irq(sbd, &s->irq);
+    s->ssi = ssi_create_bus(dev, "ssi");
+    pl022_reset(s);
+    vmstate_register(dev, -1, &vmstate_pl022, s);
+    return 0;
+}
+
+static void pl022_class_init(ObjectClass *klass, void *data)
+{
+    SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
+
+    sdc->init = pl022_init;
+}
+
+static const TypeInfo pl022_info = {
+    .name          = TYPE_PL022,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(PL022State),
+    .class_init    = pl022_class_init,
+};
+
+static void pl022_register_types(void)
+{
+    type_register_static(&pl022_info);
+}
+
+type_init(pl022_register_types)