Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 216 insertions, 0 deletions

diff --git a/qemu/hw/scsi/viosrp.h b/qemu/hw/scsi/viosrp.h
new file mode 100644
index 000000000..d8e365db1
--- /dev/null
+++ b/qemu/hw/scsi/viosrp.h
@@ -0,0 +1,216 @@
+/*****************************************************************************/
+/* srp.h -- SCSI RDMA Protocol definitions                                   */
+/*                                                                           */
+/* Written By: Colin Devilbis, IBM Corporation                               */
+/*                                                                           */
+/* Copyright (C) 2003 IBM Corporation                                        */
+/*                                                                           */
+/* This program is free software; you can redistribute it and/or modify      */
+/* it under the terms of the GNU General Public License as published by      */
+/* the Free Software Foundation; either version 2 of the License, or         */
+/* (at your option) any later version.                                       */
+/*                                                                           */
+/* This program is distributed in the hope that it will be useful,           */
+/* but WITHOUT ANY WARRANTY; without even the implied warranty of            */
+/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the             */
+/* GNU General Public License for more details.                              */
+/*                                                                           */
+/* You should have received a copy of the GNU General Public License         */
+/* along with this program; if not, write to the Free Software               */
+/* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA */
+/*                                                                           */
+/*                                                                           */
+/* This file contains structures and definitions for IBM RPA (RS/6000        */
+/* platform architecture) implementation of the SRP (SCSI RDMA Protocol)     */
+/* standard.  SRP is used on IBM iSeries and pSeries platforms to send SCSI  */
+/* commands between logical partitions.                                      */
+/*                                                                           */
+/* SRP Information Units (IUs) are sent on a "Command/Response Queue" (CRQ)  */
+/* between partitions.  The definitions in this file are architected,        */
+/* and cannot be changed without breaking compatibility with other versions  */
+/* of Linux and other operating systems (AIX, OS/400) that talk this protocol*/
+/* between logical partitions                                                */
+/*****************************************************************************/
+#ifndef PPC_VIOSRP_H
+#define PPC_VIOSRP_H
+
+#define SRP_VERSION "16.a"
+#define SRP_MAX_IU_LEN    256
+#define SRP_MAX_LOC_LEN 32
+
+union srp_iu {
+    struct srp_login_req login_req;
+    struct srp_login_rsp login_rsp;
+    struct srp_login_rej login_rej;
+    struct srp_i_logout i_logout;
+    struct srp_t_logout t_logout;
+    struct srp_tsk_mgmt tsk_mgmt;
+    struct srp_cmd cmd;
+    struct srp_rsp rsp;
+    uint8_t reserved[SRP_MAX_IU_LEN];
+};
+
+enum viosrp_crq_formats {
+    VIOSRP_SRP_FORMAT = 0x01,
+    VIOSRP_MAD_FORMAT = 0x02,
+    VIOSRP_OS400_FORMAT = 0x03,
+    VIOSRP_AIX_FORMAT = 0x04,
+    VIOSRP_LINUX_FORMAT = 0x06,
+    VIOSRP_INLINE_FORMAT = 0x07
+};
+
+enum viosrp_crq_status {
+    VIOSRP_OK = 0x0,
+    VIOSRP_NONRECOVERABLE_ERR = 0x1,
+    VIOSRP_VIOLATES_MAX_XFER = 0x2,
+    VIOSRP_PARTNER_PANIC = 0x3,
+    VIOSRP_DEVICE_BUSY = 0x8,
+    VIOSRP_ADAPTER_FAIL = 0x10,
+    VIOSRP_OK2 = 0x99,
+};
+
+struct viosrp_crq {
+    uint8_t valid;        /* used by RPA */
+    uint8_t format;        /* SCSI vs out-of-band */
+    uint8_t reserved;
+    uint8_t status;        /* non-scsi failure? (e.g. DMA failure) */
+    uint16_t timeout;        /* in seconds */
+    uint16_t IU_length;        /* in bytes */
+    uint64_t IU_data_ptr;    /* the TCE for transferring data */
+};
+
+/* MADs are Management requests above and beyond the IUs defined in the SRP
+ * standard.
+ */
+enum viosrp_mad_types {
+    VIOSRP_EMPTY_IU_TYPE = 0x01,
+    VIOSRP_ERROR_LOG_TYPE = 0x02,
+    VIOSRP_ADAPTER_INFO_TYPE = 0x03,
+    VIOSRP_HOST_CONFIG_TYPE = 0x04,
+    VIOSRP_CAPABILITIES_TYPE = 0x05,
+    VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+    VIOSRP_MAD_SUCCESS = 0x00,
+    VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+    VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+    MIGRATION_CAPABILITIES = 0x01,
+    RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+    SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+    SERVER_SUPPORTS_CAP = 0x01,
+    SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+    CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+    CLIENT_MIGRATED = 0x01,
+    CLIENT_RECONNECT = 0x02,
+    CAP_LIST_SUPPORTED = 0x04,
+    CAP_LIST_DATA = 0x08,
+};
+
+/*
+ * Common MAD header
+ */
+struct mad_common {
+    uint32_t type;
+    uint16_t status;
+    uint16_t length;
+    uint64_t tag;
+};
+
+/*
+ * All SRP (and MAD) requests normally flow from the
+ * client to the server.  There is no way for the server to send
+ * an asynchronous message back to the client.  The Empty IU is used
+ * to hang out a meaningless request to the server so that it can respond
+ * asynchrouously with something like a SCSI AER
+ */
+struct viosrp_empty_iu {
+    struct mad_common common;
+    uint64_t buffer;
+    uint32_t port;
+};
+
+struct viosrp_error_log {
+    struct mad_common common;
+    uint64_t buffer;
+};
+
+struct viosrp_adapter_info {
+    struct mad_common common;
+    uint64_t buffer;
+};
+
+struct viosrp_host_config {
+    struct mad_common common;
+    uint64_t buffer;
+};
+
+struct viosrp_fast_fail {
+    struct mad_common common;
+};
+
+struct viosrp_capabilities {
+    struct mad_common common;
+    uint64_t buffer;
+};
+
+struct mad_capability_common {
+    uint32_t cap_type;
+    uint16_t length;
+    uint16_t server_support;
+};
+
+struct mad_reserve_cap {
+    struct mad_capability_common common;
+    uint32_t type;
+};
+
+struct mad_migration_cap {
+    struct mad_capability_common common;
+    uint32_t ecl;
+};
+
+struct capabilities {
+    uint32_t flags;
+    char name[SRP_MAX_LOC_LEN];
+    char loc[SRP_MAX_LOC_LEN];
+    struct mad_migration_cap migration;
+    struct mad_reserve_cap reserve;
+};
+
+union mad_iu {
+    struct viosrp_empty_iu empty_iu;
+    struct viosrp_error_log error_log;
+    struct viosrp_adapter_info adapter_info;
+    struct viosrp_host_config host_config;
+    struct viosrp_fast_fail fast_fail;
+    struct viosrp_capabilities capabilities;
+};
+
+union viosrp_iu {
+    union srp_iu srp;
+    union mad_iu mad;
+};
+
+struct mad_adapter_info_data {
+    char srp_version[8];
+    char partition_name[96];
+    uint32_t partition_number;
+    uint32_t mad_version;
+    uint32_t os_type;
+    uint32_t port_max_txu[8];    /* per-port maximum transfer */
+};
+
+#endif