Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 280 insertions, 0 deletions

diff --git a/qemu/hw/ppc/spapr_pci_vfio.c b/qemu/hw/ppc/spapr_pci_vfio.c
new file mode 100644
index 000000000..cca45ed31
--- /dev/null
+++ b/qemu/hw/ppc/spapr_pci_vfio.c
@@ -0,0 +1,280 @@
+/*
+ * QEMU sPAPR PCI host for VFIO
+ *
+ * Copyright (c) 2011-2014 Alexey Kardashevskiy, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License,
+ *  or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/ppc/spapr.h"
+#include "hw/pci-host/spapr.h"
+#include "hw/pci/msix.h"
+#include "linux/vfio.h"
+#include "hw/vfio/vfio.h"
+
+static Property spapr_phb_vfio_properties[] = {
+    DEFINE_PROP_INT32("iommu", sPAPRPHBVFIOState, iommugroupid, -1),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
+    int ret;
+    sPAPRTCETable *tcet;
+    uint32_t liobn = svphb->phb.dma_liobn;
+
+    if (svphb->iommugroupid == -1) {
+        error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid);
+        return;
+    }
+
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_CHECK_EXTENSION,
+                               (void *) VFIO_SPAPR_TCE_IOMMU);
+    if (ret != 1) {
+        error_setg_errno(errp, -ret,
+                         "spapr-vfio: SPAPR extension is not supported");
+        return;
+    }
+
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
+    if (ret) {
+        error_setg_errno(errp, -ret,
+                         "spapr-vfio: get info from container failed");
+        return;
+    }
+
+    tcet = spapr_tce_new_table(DEVICE(sphb), liobn, info.dma32_window_start,
+                               SPAPR_TCE_PAGE_SHIFT,
+                               info.dma32_window_size >> SPAPR_TCE_PAGE_SHIFT,
+                               true);
+    if (!tcet) {
+        error_setg(errp, "spapr-vfio: failed to create VFIO TCE table");
+        return;
+    }
+
+    /* Register default 32bit DMA window */
+    memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset,
+                                spapr_tce_get_iommu(tcet));
+}
+
+static void spapr_phb_vfio_eeh_reenable(sPAPRPHBVFIOState *svphb)
+{
+    struct vfio_eeh_pe_op op = {
+        .argsz = sizeof(op),
+        .op    = VFIO_EEH_PE_ENABLE
+    };
+
+    vfio_container_ioctl(&svphb->phb.iommu_as,
+                         svphb->iommugroupid, VFIO_EEH_PE_OP, &op);
+}
+
+static void spapr_phb_vfio_reset(DeviceState *qdev)
+{
+    /*
+     * The PE might be in frozen state. To reenable the EEH
+     * functionality on it will clean the frozen state, which
+     * ensures that the contained PCI devices will work properly
+     * after reboot.
+     */
+    spapr_phb_vfio_eeh_reenable(SPAPR_PCI_VFIO_HOST_BRIDGE(qdev));
+}
+
+static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
+                                         unsigned int addr, int option)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
+    int ret;
+
+    switch (option) {
+    case RTAS_EEH_DISABLE:
+        op.op = VFIO_EEH_PE_DISABLE;
+        break;
+    case RTAS_EEH_ENABLE: {
+        PCIHostState *phb;
+        PCIDevice *pdev;
+
+        /*
+         * The EEH functionality is enabled on basis of PCI device,
+         * instead of PE. We need check the validity of the PCI
+         * device address.
+         */
+        phb = PCI_HOST_BRIDGE(sphb);
+        pdev = pci_find_device(phb->bus,
+                               (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
+        if (!pdev) {
+            return RTAS_OUT_PARAM_ERROR;
+        }
+
+        op.op = VFIO_EEH_PE_ENABLE;
+        break;
+    }
+    case RTAS_EEH_THAW_IO:
+        op.op = VFIO_EEH_PE_UNFREEZE_IO;
+        break;
+    case RTAS_EEH_THAW_DMA:
+        op.op = VFIO_EEH_PE_UNFREEZE_DMA;
+        break;
+    default:
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_EEH_PE_OP, &op);
+    if (ret < 0) {
+        return RTAS_OUT_HW_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}
+
+static int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
+    int ret;
+
+    op.op = VFIO_EEH_PE_GET_STATE;
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_EEH_PE_OP, &op);
+    if (ret < 0) {
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    *state = ret;
+    return RTAS_OUT_SUCCESS;
+}
+
+static void spapr_phb_vfio_eeh_clear_dev_msix(PCIBus *bus,
+                                              PCIDevice *pdev,
+                                              void *opaque)
+{
+    /* Check if the device is VFIO PCI device */
+    if (!object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+        return;
+    }
+
+    /*
+     * The MSIx table will be cleaned out by reset. We need
+     * disable it so that it can be reenabled properly. Also,
+     * the cached MSIx table should be cleared as it's not
+     * reflecting the contents in hardware.
+     */
+    if (msix_enabled(pdev)) {
+        uint16_t flags;
+
+        flags = pci_host_config_read_common(pdev,
+                                            pdev->msix_cap + PCI_MSIX_FLAGS,
+                                            pci_config_size(pdev), 2);
+        flags &= ~PCI_MSIX_FLAGS_ENABLE;
+        pci_host_config_write_common(pdev,
+                                     pdev->msix_cap + PCI_MSIX_FLAGS,
+                                     pci_config_size(pdev), flags, 2);
+    }
+
+    msix_reset(pdev);
+}
+
+static void spapr_phb_vfio_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
+{
+       pci_for_each_device(bus, pci_bus_num(bus),
+                           spapr_phb_vfio_eeh_clear_dev_msix, NULL);
+}
+
+static void spapr_phb_vfio_eeh_pre_reset(sPAPRPHBState *sphb)
+{
+       PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
+
+       pci_for_each_bus(phb->bus, spapr_phb_vfio_eeh_clear_bus_msix, NULL);
+}
+
+static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
+    int ret;
+
+    switch (option) {
+    case RTAS_SLOT_RESET_DEACTIVATE:
+        op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
+        break;
+    case RTAS_SLOT_RESET_HOT:
+        spapr_phb_vfio_eeh_pre_reset(sphb);
+        op.op = VFIO_EEH_PE_RESET_HOT;
+        break;
+    case RTAS_SLOT_RESET_FUNDAMENTAL:
+        spapr_phb_vfio_eeh_pre_reset(sphb);
+        op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
+        break;
+    default:
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_EEH_PE_OP, &op);
+    if (ret < 0) {
+        return RTAS_OUT_HW_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}
+
+static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
+{
+    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+    struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
+    int ret;
+
+    op.op = VFIO_EEH_PE_CONFIGURE;
+    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+                               VFIO_EEH_PE_OP, &op);
+    if (ret < 0) {
+        return RTAS_OUT_PARAM_ERROR;
+    }
+
+    return RTAS_OUT_SUCCESS;
+}
+
+static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
+
+    dc->props = spapr_phb_vfio_properties;
+    dc->reset = spapr_phb_vfio_reset;
+    spc->finish_realize = spapr_phb_vfio_finish_realize;
+    spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
+    spc->eeh_get_state = spapr_phb_vfio_eeh_get_state;
+    spc->eeh_reset = spapr_phb_vfio_eeh_reset;
+    spc->eeh_configure = spapr_phb_vfio_eeh_configure;
+}
+
+static const TypeInfo spapr_phb_vfio_info = {
+    .name          = TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE,
+    .parent        = TYPE_SPAPR_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(sPAPRPHBVFIOState),
+    .class_init    = spapr_phb_vfio_class_init,
+    .class_size    = sizeof(sPAPRPHBClass),
+};
+
+static void spapr_pci_vfio_register_types(void)
+{
+    type_register_static(&spapr_phb_vfio_info);
+}
+
+type_init(spapr_pci_vfio_register_types)