Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 1835 insertions, 0 deletions

diff --git a/qemu/hw/ppc/spapr_pci.c b/qemu/hw/ppc/spapr_pci.c
new file mode 100644
index 000000000..a8f79d800
--- /dev/null
+++ b/qemu/hw/ppc/spapr_pci.c
@@ -0,0 +1,1835 @@
+/*
+ * QEMU sPAPR PCI host originated from Uninorth PCI host
+ *
+ * Copyright (c) 2011 Alexey Kardashevskiy, IBM Corporation.
+ * Copyright (C) 2011 David Gibson, IBM Corporation.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/msix.h"
+#include "hw/pci/pci_host.h"
+#include "hw/ppc/spapr.h"
+#include "hw/pci-host/spapr.h"
+#include "exec/address-spaces.h"
+#include <libfdt.h>
+#include "trace.h"
+#include "qemu/error-report.h"
+#include "qapi/qmp/qerror.h"
+
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/ppc/spapr_drc.h"
+#include "sysemu/device_tree.h"
+
+/* Copied from the kernel arch/powerpc/platforms/pseries/msi.c */
+#define RTAS_QUERY_FN           0
+#define RTAS_CHANGE_FN          1
+#define RTAS_RESET_FN           2
+#define RTAS_CHANGE_MSI_FN      3
+#define RTAS_CHANGE_MSIX_FN     4
+
+/* Interrupt types to return on RTAS_CHANGE_* */
+#define RTAS_TYPE_MSI           1
+#define RTAS_TYPE_MSIX          2
+
+#define FDT_NAME_MAX          128
+
+#define _FDT(exp) \
+    do { \
+        int ret = (exp);                                           \
+        if (ret < 0) {                                             \
+            return ret;                                            \
+        }                                                          \
+    } while (0)
+
+sPAPRPHBState *spapr_pci_find_phb(sPAPRMachineState *spapr, uint64_t buid)
+{
+    sPAPRPHBState *sphb;
+
+    QLIST_FOREACH(sphb, &spapr->phbs, list) {
+        if (sphb->buid != buid) {
+            continue;
+        }
+        return sphb;
+    }
+
+    return NULL;
+}
+
+PCIDevice *spapr_pci_find_dev(sPAPRMachineState *spapr, uint64_t buid,
+                              uint32_t config_addr)
+{
+    sPAPRPHBState *sphb = spapr_pci_find_phb(spapr, buid);
+    PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
+    int bus_num = (config_addr >> 16) & 0xFF;
+    int devfn = (config_addr >> 8) & 0xFF;
+
+    if (!phb) {
+        return NULL;
+    }
+
+    return pci_find_device(phb->bus, bus_num, devfn);
+}
+
+static uint32_t rtas_pci_cfgaddr(uint32_t arg)
+{
+    /* This handles the encoding of extended config space addresses */
+    return ((arg >> 20) & 0xf00) | (arg & 0xff);
+}
+
+static void finish_read_pci_config(sPAPRMachineState *spapr, uint64_t buid,
+                                   uint32_t addr, uint32_t size,
+                                   target_ulong rets)
+{
+    PCIDevice *pci_dev;
+    uint32_t val;
+
+    if ((size != 1) && (size != 2) && (size != 4)) {
+        /* access must be 1, 2 or 4 bytes */
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    pci_dev = spapr_pci_find_dev(spapr, buid, addr);
+    addr = rtas_pci_cfgaddr(addr);
+
+    if (!pci_dev || (addr % size) || (addr >= pci_config_size(pci_dev))) {
+        /* Access must be to a valid device, within bounds and
+         * naturally aligned */
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    val = pci_host_config_read_common(pci_dev, addr,
+                                      pci_config_size(pci_dev), size);
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    rtas_st(rets, 1, val);
+}
+
+static void rtas_ibm_read_pci_config(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                     uint32_t token, uint32_t nargs,
+                                     target_ulong args,
+                                     uint32_t nret, target_ulong rets)
+{
+    uint64_t buid;
+    uint32_t size, addr;
+
+    if ((nargs != 4) || (nret != 2)) {
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    size = rtas_ld(args, 3);
+    addr = rtas_ld(args, 0);
+
+    finish_read_pci_config(spapr, buid, addr, size, rets);
+}
+
+static void rtas_read_pci_config(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                 uint32_t token, uint32_t nargs,
+                                 target_ulong args,
+                                 uint32_t nret, target_ulong rets)
+{
+    uint32_t size, addr;
+
+    if ((nargs != 2) || (nret != 2)) {
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    size = rtas_ld(args, 1);
+    addr = rtas_ld(args, 0);
+
+    finish_read_pci_config(spapr, 0, addr, size, rets);
+}
+
+static void finish_write_pci_config(sPAPRMachineState *spapr, uint64_t buid,
+                                    uint32_t addr, uint32_t size,
+                                    uint32_t val, target_ulong rets)
+{
+    PCIDevice *pci_dev;
+
+    if ((size != 1) && (size != 2) && (size != 4)) {
+        /* access must be 1, 2 or 4 bytes */
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    pci_dev = spapr_pci_find_dev(spapr, buid, addr);
+    addr = rtas_pci_cfgaddr(addr);
+
+    if (!pci_dev || (addr % size) || (addr >= pci_config_size(pci_dev))) {
+        /* Access must be to a valid device, within bounds and
+         * naturally aligned */
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    pci_host_config_write_common(pci_dev, addr, pci_config_size(pci_dev),
+                                 val, size);
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+}
+
+static void rtas_ibm_write_pci_config(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                      uint32_t token, uint32_t nargs,
+                                      target_ulong args,
+                                      uint32_t nret, target_ulong rets)
+{
+    uint64_t buid;
+    uint32_t val, size, addr;
+
+    if ((nargs != 5) || (nret != 1)) {
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    val = rtas_ld(args, 4);
+    size = rtas_ld(args, 3);
+    addr = rtas_ld(args, 0);
+
+    finish_write_pci_config(spapr, buid, addr, size, val, rets);
+}
+
+static void rtas_write_pci_config(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                  uint32_t token, uint32_t nargs,
+                                  target_ulong args,
+                                  uint32_t nret, target_ulong rets)
+{
+    uint32_t val, size, addr;
+
+    if ((nargs != 3) || (nret != 1)) {
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+
+    val = rtas_ld(args, 2);
+    size = rtas_ld(args, 1);
+    addr = rtas_ld(args, 0);
+
+    finish_write_pci_config(spapr, 0, addr, size, val, rets);
+}
+
+/*
+ * Set MSI/MSIX message data.
+ * This is required for msi_notify()/msix_notify() which
+ * will write at the addresses via spapr_msi_write().
+ *
+ * If hwaddr == 0, all entries will have .data == first_irq i.e.
+ * table will be reset.
+ */
+static void spapr_msi_setmsg(PCIDevice *pdev, hwaddr addr, bool msix,
+                             unsigned first_irq, unsigned req_num)
+{
+    unsigned i;
+    MSIMessage msg = { .address = addr, .data = first_irq };
+
+    if (!msix) {
+        msi_set_message(pdev, msg);
+        trace_spapr_pci_msi_setup(pdev->name, 0, msg.address);
+        return;
+    }
+
+    for (i = 0; i < req_num; ++i) {
+        msix_set_message(pdev, i, msg);
+        trace_spapr_pci_msi_setup(pdev->name, i, msg.address);
+        if (addr) {
+            ++msg.data;
+        }
+    }
+}
+
+static void rtas_ibm_change_msi(PowerPCCPU *cpu, sPAPRMachineState *spapr,
+                                uint32_t token, uint32_t nargs,
+                                target_ulong args, uint32_t nret,
+                                target_ulong rets)
+{
+    uint32_t config_addr = rtas_ld(args, 0);
+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    unsigned int func = rtas_ld(args, 3);
+    unsigned int req_num = rtas_ld(args, 4); /* 0 == remove all */
+    unsigned int seq_num = rtas_ld(args, 5);
+    unsigned int ret_intr_type;
+    unsigned int irq, max_irqs = 0, num = 0;
+    sPAPRPHBState *phb = NULL;
+    PCIDevice *pdev = NULL;
+    spapr_pci_msi *msi;
+    int *config_addr_key;
+
+    switch (func) {
+    case RTAS_CHANGE_MSI_FN:
+    case RTAS_CHANGE_FN:
+        ret_intr_type = RTAS_TYPE_MSI;
+        break;
+    case RTAS_CHANGE_MSIX_FN:
+        ret_intr_type = RTAS_TYPE_MSIX;
+        break;
+    default:
+        error_report("rtas_ibm_change_msi(%u) is not implemented", func);
+        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+        return;
+    }
+
+    /* Fins sPAPRPHBState */
+    phb = spapr_pci_find_phb(spapr, buid);
+    if (phb) {
+        pdev = spapr_pci_find_dev(spapr, buid, config_addr);
+    }
+    if (!phb || !pdev) {
+        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+        return;
+    }
+
+    /* Releasing MSIs */
+    if (!req_num) {
+        msi = (spapr_pci_msi *) g_hash_table_lookup(phb->msi, &config_addr);
+        if (!msi) {
+            trace_spapr_pci_msi("Releasing wrong config", config_addr);
+            rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+            return;
+        }
+
+        xics_free(spapr->icp, msi->first_irq, msi->num);
+        if (msi_present(pdev)) {
+            spapr_msi_setmsg(pdev, 0, false, 0, num);
+        }
+        if (msix_present(pdev)) {
+            spapr_msi_setmsg(pdev, 0, true, 0, num);
+        }
+        g_hash_table_remove(phb->msi, &config_addr);
+
+        trace_spapr_pci_msi("Released MSIs", config_addr);
+        rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+        rtas_st(rets, 1, 0);
+        return;
+    }
+
+    /* Enabling MSI */
+
+    /* Check if the device supports as many IRQs as requested */
+    if (ret_intr_type == RTAS_TYPE_MSI) {
+        max_irqs = msi_nr_vectors_allocated(pdev);
+    } else if (ret_intr_type == RTAS_TYPE_MSIX) {
+        max_irqs = pdev->msix_entries_nr;
+    }
+    if (!max_irqs) {
+        error_report("Requested interrupt type %d is not enabled for device %x",
+                     ret_intr_type, config_addr);
+        rtas_st(rets, 0, -1); /* Hardware error */
+        return;
+    }
+    /* Correct the number if the guest asked for too many */
+    if (req_num > max_irqs) {
+        trace_spapr_pci_msi_retry(config_addr, req_num, max_irqs);
+        req_num = max_irqs;
+        irq = 0; /* to avoid misleading trace */
+        goto out;
+    }
+
+    /* Allocate MSIs */
+    irq = xics_alloc_block(spapr->icp, 0, req_num, false,
+                           ret_intr_type == RTAS_TYPE_MSI);
+    if (!irq) {
+        error_report("Cannot allocate MSIs for device %x", config_addr);
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+
+    /* Setup MSI/MSIX vectors in the device (via cfgspace or MSIX BAR) */
+    spapr_msi_setmsg(pdev, SPAPR_PCI_MSI_WINDOW, ret_intr_type == RTAS_TYPE_MSIX,
+                     irq, req_num);
+
+    /* Add MSI device to cache */
+    msi = g_new(spapr_pci_msi, 1);
+    msi->first_irq = irq;
+    msi->num = req_num;
+    config_addr_key = g_new(int, 1);
+    *config_addr_key = config_addr;
+    g_hash_table_insert(phb->msi, config_addr_key, msi);
+
+out:
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    rtas_st(rets, 1, req_num);
+    rtas_st(rets, 2, ++seq_num);
+    rtas_st(rets, 3, ret_intr_type);
+
+    trace_spapr_pci_rtas_ibm_change_msi(config_addr, func, req_num, irq);
+}
+
+static void rtas_ibm_query_interrupt_source_number(PowerPCCPU *cpu,
+                                                   sPAPRMachineState *spapr,
+                                                   uint32_t token,
+                                                   uint32_t nargs,
+                                                   target_ulong args,
+                                                   uint32_t nret,
+                                                   target_ulong rets)
+{
+    uint32_t config_addr = rtas_ld(args, 0);
+    uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    unsigned int intr_src_num = -1, ioa_intr_num = rtas_ld(args, 3);
+    sPAPRPHBState *phb = NULL;
+    PCIDevice *pdev = NULL;
+    spapr_pci_msi *msi;
+
+    /* Find sPAPRPHBState */
+    phb = spapr_pci_find_phb(spapr, buid);
+    if (phb) {
+        pdev = spapr_pci_find_dev(spapr, buid, config_addr);
+    }
+    if (!phb || !pdev) {
+        rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+        return;
+    }
+
+    /* Find device descriptor and start IRQ */
+    msi = (spapr_pci_msi *) g_hash_table_lookup(phb->msi, &config_addr);
+    if (!msi || !msi->first_irq || !msi->num || (ioa_intr_num >= msi->num)) {
+        trace_spapr_pci_msi("Failed to return vector", config_addr);
+        rtas_st(rets, 0, RTAS_OUT_HW_ERROR);
+        return;
+    }
+    intr_src_num = msi->first_irq + ioa_intr_num;
+    trace_spapr_pci_rtas_ibm_query_interrupt_source_number(ioa_intr_num,
+                                                           intr_src_num);
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    rtas_st(rets, 1, intr_src_num);
+    rtas_st(rets, 2, 1);/* 0 == level; 1 == edge */
+}
+
+static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
+                                    sPAPRMachineState *spapr,
+                                    uint32_t token, uint32_t nargs,
+                                    target_ulong args, uint32_t nret,
+                                    target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    PCIDevice *pdev;
+    uint32_t addr, option;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 4) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    addr = rtas_ld(args, 0);
+    option = rtas_ld(args, 3);
+
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    pdev = pci_find_device(PCI_HOST_BRIDGE(sphb)->bus,
+                           (addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
+    if (!pdev || !object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_set_option(sphb, addr, option);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
+                                           sPAPRMachineState *spapr,
+                                           uint32_t token, uint32_t nargs,
+                                           target_ulong args, uint32_t nret,
+                                           target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    PCIDevice *pdev;
+    uint32_t addr, option;
+    uint64_t buid;
+
+    if ((nargs != 4) || (nret != 2)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    /*
+     * We always have PE address of form "00BB0001". "BB"
+     * represents the bus number of PE's primary bus.
+     */
+    option = rtas_ld(args, 3);
+    switch (option) {
+    case RTAS_GET_PE_ADDR:
+        addr = rtas_ld(args, 0);
+        pdev = spapr_pci_find_dev(spapr, buid, addr);
+        if (!pdev) {
+            goto param_error_exit;
+        }
+
+        rtas_st(rets, 1, (pci_bus_num(pdev->bus) << 16) + 1);
+        break;
+    case RTAS_GET_PE_MODE:
+        rtas_st(rets, 1, RTAS_PE_MODE_SHARED);
+        break;
+    default:
+        goto param_error_exit;
+    }
+
+    rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
+                                            sPAPRMachineState *spapr,
+                                            uint32_t token, uint32_t nargs,
+                                            target_ulong args, uint32_t nret,
+                                            target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint64_t buid;
+    int state, ret;
+
+    if ((nargs != 3) || (nret != 4 && nret != 5)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_get_state) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_get_state(sphb, &state);
+    rtas_st(rets, 0, ret);
+    if (ret != RTAS_OUT_SUCCESS) {
+        return;
+    }
+
+    rtas_st(rets, 1, state);
+    rtas_st(rets, 2, RTAS_EEH_SUPPORT);
+    rtas_st(rets, 3, RTAS_EEH_PE_UNAVAIL_INFO);
+    if (nret >= 5) {
+        rtas_st(rets, 4, RTAS_EEH_PE_RECOVER_INFO);
+    }
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
+                                    sPAPRMachineState *spapr,
+                                    uint32_t token, uint32_t nargs,
+                                    target_ulong args, uint32_t nret,
+                                    target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint32_t option;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 4) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    option = rtas_ld(args, 3);
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_reset) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_reset(sphb, option);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
+                                  sPAPRMachineState *spapr,
+                                  uint32_t token, uint32_t nargs,
+                                  target_ulong args, uint32_t nret,
+                                  target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    uint64_t buid;
+    int ret;
+
+    if ((nargs != 3) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_configure) {
+        goto param_error_exit;
+    }
+
+    ret = spc->eeh_configure(sphb);
+    rtas_st(rets, 0, ret);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+/* To support it later */
+static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
+                                       sPAPRMachineState *spapr,
+                                       uint32_t token, uint32_t nargs,
+                                       target_ulong args, uint32_t nret,
+                                       target_ulong rets)
+{
+    sPAPRPHBState *sphb;
+    sPAPRPHBClass *spc;
+    int option;
+    uint64_t buid;
+
+    if ((nargs != 8) || (nret != 1)) {
+        goto param_error_exit;
+    }
+
+    buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+    sphb = spapr_pci_find_phb(spapr, buid);
+    if (!sphb) {
+        goto param_error_exit;
+    }
+
+    spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+    if (!spc->eeh_set_option) {
+        goto param_error_exit;
+    }
+
+    option = rtas_ld(args, 7);
+    switch (option) {
+    case RTAS_SLOT_TEMP_ERR_LOG:
+    case RTAS_SLOT_PERM_ERR_LOG:
+        break;
+    default:
+        goto param_error_exit;
+    }
+
+    /* We don't have error log yet */
+    rtas_st(rets, 0, RTAS_OUT_NO_ERRORS_FOUND);
+    return;
+
+param_error_exit:
+    rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static int pci_spapr_swizzle(int slot, int pin)
+{
+    return (slot + pin) % PCI_NUM_PINS;
+}
+
+static int pci_spapr_map_irq(PCIDevice *pci_dev, int irq_num)
+{
+    /*
+     * Here we need to convert pci_dev + irq_num to some unique value
+     * which is less than number of IRQs on the specific bus (4).  We
+     * use standard PCI swizzling, that is (slot number + pin number)
+     * % 4.
+     */
+    return pci_spapr_swizzle(PCI_SLOT(pci_dev->devfn), irq_num);
+}
+
+static void pci_spapr_set_irq(void *opaque, int irq_num, int level)
+{
+    /*
+     * Here we use the number returned by pci_spapr_map_irq to find a
+     * corresponding qemu_irq.
+     */
+    sPAPRPHBState *phb = opaque;
+
+    trace_spapr_pci_lsi_set(phb->dtbusname, irq_num, phb->lsi_table[irq_num].irq);
+    qemu_set_irq(spapr_phb_lsi_qirq(phb, irq_num), level);
+}
+
+static PCIINTxRoute spapr_route_intx_pin_to_irq(void *opaque, int pin)
+{
+    sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(opaque);
+    PCIINTxRoute route;
+
+    route.mode = PCI_INTX_ENABLED;
+    route.irq = sphb->lsi_table[pin].irq;
+
+    return route;
+}
+
+/*
+ * MSI/MSIX memory region implementation.
+ * The handler handles both MSI and MSIX.
+ * For MSI-X, the vector number is encoded as a part of the address,
+ * data is set to 0.
+ * For MSI, the vector number is encoded in least bits in data.
+ */
+static void spapr_msi_write(void *opaque, hwaddr addr,
+                            uint64_t data, unsigned size)
+{
+    sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
+    uint32_t irq = data;
+
+    trace_spapr_pci_msi_write(addr, data, irq);
+
+    qemu_irq_pulse(xics_get_qirq(spapr->icp, irq));
+}
+
+static const MemoryRegionOps spapr_msi_ops = {
+    /* There is no .read as the read result is undefined by PCI spec */
+    .read = NULL,
+    .write = spapr_msi_write,
+    .endianness = DEVICE_LITTLE_ENDIAN
+};
+
+/*
+ * PHB PCI device
+ */
+static AddressSpace *spapr_pci_dma_iommu(PCIBus *bus, void *opaque, int devfn)
+{
+    sPAPRPHBState *phb = opaque;
+
+    return &phb->iommu_as;
+}
+
+static char *spapr_phb_vfio_get_loc_code(sPAPRPHBState *sphb,  PCIDevice *pdev)
+{
+    char *path = NULL, *buf = NULL, *host = NULL;
+
+    /* Get the PCI VFIO host id */
+    host = object_property_get_str(OBJECT(pdev), "host", NULL);
+    if (!host) {
+        goto err_out;
+    }
+
+    /* Construct the path of the file that will give us the DT location */
+    path = g_strdup_printf("/sys/bus/pci/devices/%s/devspec", host);
+    g_free(host);
+    if (!path || !g_file_get_contents(path, &buf, NULL, NULL)) {
+        goto err_out;
+    }
+    g_free(path);
+
+    /* Construct and read from host device tree the loc-code */
+    path = g_strdup_printf("/proc/device-tree%s/ibm,loc-code", buf);
+    g_free(buf);
+    if (!path || !g_file_get_contents(path, &buf, NULL, NULL)) {
+        goto err_out;
+    }
+    return buf;
+
+err_out:
+    g_free(path);
+    return NULL;
+}
+
+static char *spapr_phb_get_loc_code(sPAPRPHBState *sphb, PCIDevice *pdev)
+{
+    char *buf;
+    const char *devtype = "qemu";
+    uint32_t busnr = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(pdev))));
+
+    if (object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
+        buf = spapr_phb_vfio_get_loc_code(sphb, pdev);
+        if (buf) {
+            return buf;
+        }
+        devtype = "vfio";
+    }
+    /*
+     * For emulated devices and VFIO-failure case, make up
+     * the loc-code.
+     */
+    buf = g_strdup_printf("%s_%s:%04x:%02x:%02x.%x",
+                          devtype, pdev->name, sphb->index, busnr,
+                          PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+    return buf;
+}
+
+/* Macros to operate with address in OF binding to PCI */
+#define b_x(x, p, l)    (((x) & ((1<<(l))-1)) << (p))
+#define b_n(x)          b_x((x), 31, 1) /* 0 if relocatable */
+#define b_p(x)          b_x((x), 30, 1) /* 1 if prefetchable */
+#define b_t(x)          b_x((x), 29, 1) /* 1 if the address is aliased */
+#define b_ss(x)         b_x((x), 24, 2) /* the space code */
+#define b_bbbbbbbb(x)   b_x((x), 16, 8) /* bus number */
+#define b_ddddd(x)      b_x((x), 11, 5) /* device number */
+#define b_fff(x)        b_x((x), 8, 3)  /* function number */
+#define b_rrrrrrrr(x)   b_x((x), 0, 8)  /* register number */
+
+/* for 'reg'/'assigned-addresses' OF properties */
+#define RESOURCE_CELLS_SIZE 2
+#define RESOURCE_CELLS_ADDRESS 3
+
+typedef struct ResourceFields {
+    uint32_t phys_hi;
+    uint32_t phys_mid;
+    uint32_t phys_lo;
+    uint32_t size_hi;
+    uint32_t size_lo;
+} QEMU_PACKED ResourceFields;
+
+typedef struct ResourceProps {
+    ResourceFields reg[8];
+    ResourceFields assigned[7];
+    uint32_t reg_len;
+    uint32_t assigned_len;
+} ResourceProps;
+
+/* fill in the 'reg'/'assigned-resources' OF properties for
+ * a PCI device. 'reg' describes resource requirements for a
+ * device's IO/MEM regions, 'assigned-addresses' describes the
+ * actual resource assignments.
+ *
+ * the properties are arrays of ('phys-addr', 'size') pairs describing
+ * the addressable regions of the PCI device, where 'phys-addr' is a
+ * RESOURCE_CELLS_ADDRESS-tuple of 32-bit integers corresponding to
+ * (phys.hi, phys.mid, phys.lo), and 'size' is a
+ * RESOURCE_CELLS_SIZE-tuple corresponding to (size.hi, size.lo).
+ *
+ * phys.hi = 0xYYXXXXZZ, where:
+ *   0xYY = npt000ss
+ *          |||   |
+ *          |||   +-- space code
+ *          |||               |
+ *          |||               +  00 if configuration space
+ *          |||               +  01 if IO region,
+ *          |||               +  10 if 32-bit MEM region
+ *          |||               +  11 if 64-bit MEM region
+ *          |||
+ *          ||+------ for non-relocatable IO: 1 if aliased
+ *          ||        for relocatable IO: 1 if below 64KB
+ *          ||        for MEM: 1 if below 1MB
+ *          |+------- 1 if region is prefetchable
+ *          +-------- 1 if region is non-relocatable
+ *   0xXXXX = bbbbbbbb dddddfff, encoding bus, slot, and function
+ *            bits respectively
+ *   0xZZ = rrrrrrrr, the register number of the BAR corresponding
+ *          to the region
+ *
+ * phys.mid and phys.lo correspond respectively to the hi/lo portions
+ * of the actual address of the region.
+ *
+ * how the phys-addr/size values are used differ slightly between
+ * 'reg' and 'assigned-addresses' properties. namely, 'reg' has
+ * an additional description for the config space region of the
+ * device, and in the case of QEMU has n=0 and phys.mid=phys.lo=0
+ * to describe the region as relocatable, with an address-mapping
+ * that corresponds directly to the PHB's address space for the
+ * resource. 'assigned-addresses' always has n=1 set with an absolute
+ * address assigned for the resource. in general, 'assigned-addresses'
+ * won't be populated, since addresses for PCI devices are generally
+ * unmapped initially and left to the guest to assign.
+ *
+ * note also that addresses defined in these properties are, at least
+ * for PAPR guests, relative to the PHBs IO/MEM windows, and
+ * correspond directly to the addresses in the BARs.
+ *
+ * in accordance with PCI Bus Binding to Open Firmware,
+ * IEEE Std 1275-1994, section 4.1.1, as implemented by PAPR+ v2.7,
+ * Appendix C.
+ */
+static void populate_resource_props(PCIDevice *d, ResourceProps *rp)
+{
+    int bus_num = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(d))));
+    uint32_t dev_id = (b_bbbbbbbb(bus_num) |
+                       b_ddddd(PCI_SLOT(d->devfn)) |
+                       b_fff(PCI_FUNC(d->devfn)));
+    ResourceFields *reg, *assigned;
+    int i, reg_idx = 0, assigned_idx = 0;
+
+    /* config space region */
+    reg = &rp->reg[reg_idx++];
+    reg->phys_hi = cpu_to_be32(dev_id);
+    reg->phys_mid = 0;
+    reg->phys_lo = 0;
+    reg->size_hi = 0;
+    reg->size_lo = 0;
+
+    for (i = 0; i < PCI_NUM_REGIONS; i++) {
+        if (!d->io_regions[i].size) {
+            continue;
+        }
+
+        reg = &rp->reg[reg_idx++];
+
+        reg->phys_hi = cpu_to_be32(dev_id | b_rrrrrrrr(pci_bar(d, i)));
+        if (d->io_regions[i].type & PCI_BASE_ADDRESS_SPACE_IO) {
+            reg->phys_hi |= cpu_to_be32(b_ss(1));
+        } else if (d->io_regions[i].type & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+            reg->phys_hi |= cpu_to_be32(b_ss(3));
+        } else {
+            reg->phys_hi |= cpu_to_be32(b_ss(2));
+        }
+        reg->phys_mid = 0;
+        reg->phys_lo = 0;
+        reg->size_hi = cpu_to_be32(d->io_regions[i].size >> 32);
+        reg->size_lo = cpu_to_be32(d->io_regions[i].size);
+
+        if (d->io_regions[i].addr == PCI_BAR_UNMAPPED) {
+            continue;
+        }
+
+        assigned = &rp->assigned[assigned_idx++];
+        assigned->phys_hi = cpu_to_be32(reg->phys_hi | b_n(1));
+        assigned->phys_mid = cpu_to_be32(d->io_regions[i].addr >> 32);
+        assigned->phys_lo = cpu_to_be32(d->io_regions[i].addr);
+        assigned->size_hi = reg->size_hi;
+        assigned->size_lo = reg->size_lo;
+    }
+
+    rp->reg_len = reg_idx * sizeof(ResourceFields);
+    rp->assigned_len = assigned_idx * sizeof(ResourceFields);
+}
+
+static uint32_t spapr_phb_get_pci_drc_index(sPAPRPHBState *phb,
+                                            PCIDevice *pdev);
+
+static int spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int offset,
+                                       sPAPRPHBState *sphb)
+{
+    ResourceProps rp;
+    bool is_bridge = false;
+    int pci_status, err;
+    char *buf = NULL;
+    uint32_t drc_index = spapr_phb_get_pci_drc_index(sphb, dev);
+
+    if (pci_default_read_config(dev, PCI_HEADER_TYPE, 1) ==
+        PCI_HEADER_TYPE_BRIDGE) {
+        is_bridge = true;
+    }
+
+    /* in accordance with PAPR+ v2.7 13.6.3, Table 181 */
+    _FDT(fdt_setprop_cell(fdt, offset, "vendor-id",
+                          pci_default_read_config(dev, PCI_VENDOR_ID, 2)));
+    _FDT(fdt_setprop_cell(fdt, offset, "device-id",
+                          pci_default_read_config(dev, PCI_DEVICE_ID, 2)));
+    _FDT(fdt_setprop_cell(fdt, offset, "revision-id",
+                          pci_default_read_config(dev, PCI_REVISION_ID, 1)));
+    _FDT(fdt_setprop_cell(fdt, offset, "class-code",
+                          pci_default_read_config(dev, PCI_CLASS_PROG, 3)));
+    if (pci_default_read_config(dev, PCI_INTERRUPT_PIN, 1)) {
+        _FDT(fdt_setprop_cell(fdt, offset, "interrupts",
+                 pci_default_read_config(dev, PCI_INTERRUPT_PIN, 1)));
+    }
+
+    if (!is_bridge) {
+        _FDT(fdt_setprop_cell(fdt, offset, "min-grant",
+            pci_default_read_config(dev, PCI_MIN_GNT, 1)));
+        _FDT(fdt_setprop_cell(fdt, offset, "max-latency",
+            pci_default_read_config(dev, PCI_MAX_LAT, 1)));
+    }
+
+    if (pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2)) {
+        _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id",
+                 pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2)));
+    }
+
+    if (pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2)) {
+        _FDT(fdt_setprop_cell(fdt, offset, "subsystem-vendor-id",
+                 pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2)));
+    }
+
+    _FDT(fdt_setprop_cell(fdt, offset, "cache-line-size",
+        pci_default_read_config(dev, PCI_CACHE_LINE_SIZE, 1)));
+
+    /* the following fdt cells are masked off the pci status register */
+    pci_status = pci_default_read_config(dev, PCI_STATUS, 2);
+    _FDT(fdt_setprop_cell(fdt, offset, "devsel-speed",
+                          PCI_STATUS_DEVSEL_MASK & pci_status));
+
+    if (pci_status & PCI_STATUS_FAST_BACK) {
+        _FDT(fdt_setprop(fdt, offset, "fast-back-to-back", NULL, 0));
+    }
+    if (pci_status & PCI_STATUS_66MHZ) {
+        _FDT(fdt_setprop(fdt, offset, "66mhz-capable", NULL, 0));
+    }
+    if (pci_status & PCI_STATUS_UDF) {
+        _FDT(fdt_setprop(fdt, offset, "udf-supported", NULL, 0));
+    }
+
+    /* NOTE: this is normally generated by firmware via path/unit name,
+     * but in our case we must set it manually since it does not get
+     * processed by OF beforehand
+     */
+    _FDT(fdt_setprop_string(fdt, offset, "name", "pci"));
+    buf = spapr_phb_get_loc_code(sphb, dev);
+    if (!buf) {
+        error_report("Failed setting the ibm,loc-code");
+        return -1;
+    }
+
+    err = fdt_setprop_string(fdt, offset, "ibm,loc-code", buf);
+    g_free(buf);
+    if (err < 0) {
+        return err;
+    }
+
+    if (drc_index) {
+        _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
+    }
+
+    _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
+                          RESOURCE_CELLS_ADDRESS));
+    _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
+                          RESOURCE_CELLS_SIZE));
+    _FDT(fdt_setprop_cell(fdt, offset, "ibm,req#msi-x",
+                          RESOURCE_CELLS_SIZE));
+
+    populate_resource_props(dev, &rp);
+    _FDT(fdt_setprop(fdt, offset, "reg", (uint8_t *)rp.reg, rp.reg_len));
+    _FDT(fdt_setprop(fdt, offset, "assigned-addresses",
+                     (uint8_t *)rp.assigned, rp.assigned_len));
+
+    return 0;
+}
+
+/* create OF node for pci device and required OF DT properties */
+static int spapr_create_pci_child_dt(sPAPRPHBState *phb, PCIDevice *dev,
+                                     void *fdt, int node_offset)
+{
+    int offset, ret;
+    int slot = PCI_SLOT(dev->devfn);
+    int func = PCI_FUNC(dev->devfn);
+    char nodename[FDT_NAME_MAX];
+
+    if (func != 0) {
+        snprintf(nodename, FDT_NAME_MAX, "pci@%x,%x", slot, func);
+    } else {
+        snprintf(nodename, FDT_NAME_MAX, "pci@%x", slot);
+    }
+    offset = fdt_add_subnode(fdt, node_offset, nodename);
+    ret = spapr_populate_pci_child_dt(dev, fdt, offset, phb);
+
+    g_assert(!ret);
+    if (ret) {
+        return 0;
+    }
+    return offset;
+}
+
+static void spapr_phb_add_pci_device(sPAPRDRConnector *drc,
+                                     sPAPRPHBState *phb,
+                                     PCIDevice *pdev,
+                                     Error **errp)
+{
+    sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
+    DeviceState *dev = DEVICE(pdev);
+    void *fdt = NULL;
+    int fdt_start_offset = 0, fdt_size;
+
+    if (dev->hotplugged) {
+        fdt = create_device_tree(&fdt_size);
+        fdt_start_offset = spapr_create_pci_child_dt(phb, pdev, fdt, 0);
+        if (!fdt_start_offset) {
+            error_setg(errp, "Failed to create pci child device tree node");
+            goto out;
+        }
+    }
+
+    drck->attach(drc, DEVICE(pdev),
+                 fdt, fdt_start_offset, !dev->hotplugged, errp);
+out:
+    if (*errp) {
+        g_free(fdt);
+    }
+}
+
+static void spapr_phb_remove_pci_device_cb(DeviceState *dev, void *opaque)
+{
+    /* some version guests do not wait for completion of a device
+     * cleanup (generally done asynchronously by the kernel) before
+     * signaling to QEMU that the device is safe, but instead sleep
+     * for some 'safe' period of time. unfortunately on a busy host
+     * this sleep isn't guaranteed to be long enough, resulting in
+     * bad things like IRQ lines being left asserted during final
+     * device removal. to deal with this we call reset just prior
+     * to finalizing the device, which will put the device back into
+     * an 'idle' state, as the device cleanup code expects.
+     */
+    pci_device_reset(PCI_DEVICE(dev));
+    object_unparent(OBJECT(dev));
+}
+
+static void spapr_phb_remove_pci_device(sPAPRDRConnector *drc,
+                                        sPAPRPHBState *phb,
+                                        PCIDevice *pdev,
+                                        Error **errp)
+{
+    sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
+
+    drck->detach(drc, DEVICE(pdev), spapr_phb_remove_pci_device_cb, phb, errp);
+}
+
+static sPAPRDRConnector *spapr_phb_get_pci_drc(sPAPRPHBState *phb,
+                                               PCIDevice *pdev)
+{
+    uint32_t busnr = pci_bus_num(PCI_BUS(qdev_get_parent_bus(DEVICE(pdev))));
+    return spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_PCI,
+                                    (phb->index << 16) |
+                                    (busnr << 8) |
+                                    pdev->devfn);
+}
+
+static uint32_t spapr_phb_get_pci_drc_index(sPAPRPHBState *phb,
+                                            PCIDevice *pdev)
+{
+    sPAPRDRConnector *drc = spapr_phb_get_pci_drc(phb, pdev);
+    sPAPRDRConnectorClass *drck;
+
+    if (!drc) {
+        return 0;
+    }
+
+    drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
+    return drck->get_index(drc);
+}
+
+static void spapr_phb_hot_plug_child(HotplugHandler *plug_handler,
+                                     DeviceState *plugged_dev, Error **errp)
+{
+    sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
+    PCIDevice *pdev = PCI_DEVICE(plugged_dev);
+    sPAPRDRConnector *drc = spapr_phb_get_pci_drc(phb, pdev);
+    Error *local_err = NULL;
+
+    /* if DR is disabled we don't need to do anything in the case of
+     * hotplug or coldplug callbacks
+     */
+    if (!phb->dr_enabled) {
+        /* if this is a hotplug operation initiated by the user
+         * we need to let them know it's not enabled
+         */
+        if (plugged_dev->hotplugged) {
+            error_setg(errp, QERR_BUS_NO_HOTPLUG,
+                       object_get_typename(OBJECT(phb)));
+        }
+        return;
+    }
+
+    g_assert(drc);
+
+    spapr_phb_add_pci_device(drc, phb, pdev, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
+    }
+    if (plugged_dev->hotplugged) {
+        spapr_hotplug_req_add_event(drc);
+    }
+}
+
+static void spapr_phb_hot_unplug_child(HotplugHandler *plug_handler,
+                                       DeviceState *plugged_dev, Error **errp)
+{
+    sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
+    PCIDevice *pdev = PCI_DEVICE(plugged_dev);
+    sPAPRDRConnectorClass *drck;
+    sPAPRDRConnector *drc = spapr_phb_get_pci_drc(phb, pdev);
+    Error *local_err = NULL;
+
+    if (!phb->dr_enabled) {
+        error_setg(errp, QERR_BUS_NO_HOTPLUG,
+                   object_get_typename(OBJECT(phb)));
+        return;
+    }
+
+    g_assert(drc);
+
+    drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
+    if (!drck->release_pending(drc)) {
+        spapr_phb_remove_pci_device(drc, phb, pdev, &local_err);
+        if (local_err) {
+            error_propagate(errp, local_err);
+            return;
+        }
+        spapr_hotplug_req_remove_event(drc);
+    }
+}
+
+static void spapr_phb_realize(DeviceState *dev, Error **errp)
+{
+    sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
+    SysBusDevice *s = SYS_BUS_DEVICE(dev);
+    sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(s);
+    PCIHostState *phb = PCI_HOST_BRIDGE(s);
+    sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(s);
+    char *namebuf;
+    int i;
+    PCIBus *bus;
+    uint64_t msi_window_size = 4096;
+
+    if (sphb->index != (uint32_t)-1) {
+        hwaddr windows_base;
+
+        if ((sphb->buid != (uint64_t)-1) || (sphb->dma_liobn != (uint32_t)-1)
+            || (sphb->mem_win_addr != (hwaddr)-1)
+            || (sphb->io_win_addr != (hwaddr)-1)) {
+            error_setg(errp, "Either \"index\" or other parameters must"
+                       " be specified for PAPR PHB, not both");
+            return;
+        }
+
+        if (sphb->index > SPAPR_PCI_MAX_INDEX) {
+            error_setg(errp, "\"index\" for PAPR PHB is too large (max %u)",
+                       SPAPR_PCI_MAX_INDEX);
+            return;
+        }
+
+        sphb->buid = SPAPR_PCI_BASE_BUID + sphb->index;
+        sphb->dma_liobn = SPAPR_PCI_LIOBN(sphb->index, 0);
+
+        windows_base = SPAPR_PCI_WINDOW_BASE
+            + sphb->index * SPAPR_PCI_WINDOW_SPACING;
+        sphb->mem_win_addr = windows_base + SPAPR_PCI_MMIO_WIN_OFF;
+        sphb->io_win_addr = windows_base + SPAPR_PCI_IO_WIN_OFF;
+    }
+
+    if (sphb->buid == (uint64_t)-1) {
+        error_setg(errp, "BUID not specified for PHB");
+        return;
+    }
+
+    if (sphb->dma_liobn == (uint32_t)-1) {
+        error_setg(errp, "LIOBN not specified for PHB");
+        return;
+    }
+
+    if (sphb->mem_win_addr == (hwaddr)-1) {
+        error_setg(errp, "Memory window address not specified for PHB");
+        return;
+    }
+
+    if (sphb->io_win_addr == (hwaddr)-1) {
+        error_setg(errp, "IO window address not specified for PHB");
+        return;
+    }
+
+    if (spapr_pci_find_phb(spapr, sphb->buid)) {
+        error_setg(errp, "PCI host bridges must have unique BUIDs");
+        return;
+    }
+
+    sphb->dtbusname = g_strdup_printf("pci@%" PRIx64, sphb->buid);
+
+    namebuf = alloca(strlen(sphb->dtbusname) + 32);
+
+    /* Initialize memory regions */
+    sprintf(namebuf, "%s.mmio", sphb->dtbusname);
+    memory_region_init(&sphb->memspace, OBJECT(sphb), namebuf, UINT64_MAX);
+
+    sprintf(namebuf, "%s.mmio-alias", sphb->dtbusname);
+    memory_region_init_alias(&sphb->memwindow, OBJECT(sphb),
+                             namebuf, &sphb->memspace,
+                             SPAPR_PCI_MEM_WIN_BUS_OFFSET, sphb->mem_win_size);
+    memory_region_add_subregion(get_system_memory(), sphb->mem_win_addr,
+                                &sphb->memwindow);
+
+    /* Initialize IO regions */
+    sprintf(namebuf, "%s.io", sphb->dtbusname);
+    memory_region_init(&sphb->iospace, OBJECT(sphb),
+                       namebuf, SPAPR_PCI_IO_WIN_SIZE);
+
+    sprintf(namebuf, "%s.io-alias", sphb->dtbusname);
+    memory_region_init_alias(&sphb->iowindow, OBJECT(sphb), namebuf,
+                             &sphb->iospace, 0, SPAPR_PCI_IO_WIN_SIZE);
+    memory_region_add_subregion(get_system_memory(), sphb->io_win_addr,
+                                &sphb->iowindow);
+
+    bus = pci_register_bus(dev, NULL,
+                           pci_spapr_set_irq, pci_spapr_map_irq, sphb,
+                           &sphb->memspace, &sphb->iospace,
+                           PCI_DEVFN(0, 0), PCI_NUM_PINS, TYPE_PCI_BUS);
+    phb->bus = bus;
+    qbus_set_hotplug_handler(BUS(phb->bus), DEVICE(sphb), NULL);
+
+    /*
+     * Initialize PHB address space.
+     * By default there will be at least one subregion for default
+     * 32bit DMA window.
+     * Later the guest might want to create another DMA window
+     * which will become another memory subregion.
+     */
+    sprintf(namebuf, "%s.iommu-root", sphb->dtbusname);
+
+    memory_region_init(&sphb->iommu_root, OBJECT(sphb),
+                       namebuf, UINT64_MAX);
+    address_space_init(&sphb->iommu_as, &sphb->iommu_root,
+                       sphb->dtbusname);
+
+    /*
+     * As MSI/MSIX interrupts trigger by writing at MSI/MSIX vectors,
+     * we need to allocate some memory to catch those writes coming
+     * from msi_notify()/msix_notify().
+     * As MSIMessage:addr is going to be the same and MSIMessage:data
+     * is going to be a VIRQ number, 4 bytes of the MSI MR will only
+     * be used.
+     *
+     * For KVM we want to ensure that this memory is a full page so that
+     * our memory slot is of page size granularity.
+     */
+#ifdef CONFIG_KVM
+    if (kvm_enabled()) {
+        msi_window_size = getpagesize();
+    }
+#endif
+
+    memory_region_init_io(&sphb->msiwindow, NULL, &spapr_msi_ops, spapr,
+                          "msi", msi_window_size);
+    memory_region_add_subregion(&sphb->iommu_root, SPAPR_PCI_MSI_WINDOW,
+                                &sphb->msiwindow);
+
+    pci_setup_iommu(bus, spapr_pci_dma_iommu, sphb);
+
+    pci_bus_set_route_irq_fn(bus, spapr_route_intx_pin_to_irq);
+
+    QLIST_INSERT_HEAD(&spapr->phbs, sphb, list);
+
+    /* Initialize the LSI table */
+    for (i = 0; i < PCI_NUM_PINS; i++) {
+        uint32_t irq;
+
+        irq = xics_alloc_block(spapr->icp, 0, 1, true, false);
+        if (!irq) {
+            error_setg(errp, "spapr_allocate_lsi failed");
+            return;
+        }
+
+        sphb->lsi_table[i].irq = irq;
+    }
+
+    /* allocate connectors for child PCI devices */
+    if (sphb->dr_enabled) {
+        for (i = 0; i < PCI_SLOT_MAX * 8; i++) {
+            spapr_dr_connector_new(OBJECT(phb),
+                                   SPAPR_DR_CONNECTOR_TYPE_PCI,
+                                   (sphb->index << 16) | i);
+        }
+    }
+
+    if (!info->finish_realize) {
+        error_setg(errp, "finish_realize not defined");
+        return;
+    }
+
+    info->finish_realize(sphb, errp);
+
+    sphb->msi = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free);
+}
+
+static void spapr_phb_finish_realize(sPAPRPHBState *sphb, Error **errp)
+{
+    sPAPRTCETable *tcet;
+    uint32_t nb_table;
+
+    nb_table = SPAPR_PCI_DMA32_SIZE >> SPAPR_TCE_PAGE_SHIFT;
+    tcet = spapr_tce_new_table(DEVICE(sphb), sphb->dma_liobn,
+                               0, SPAPR_TCE_PAGE_SHIFT, nb_table, false);
+    if (!tcet) {
+        error_setg(errp, "Unable to create TCE table for %s",
+                   sphb->dtbusname);
+        return ;
+    }
+
+    /* Register default 32bit DMA window */
+    memory_region_add_subregion(&sphb->iommu_root, 0,
+                                spapr_tce_get_iommu(tcet));
+}
+
+static int spapr_phb_children_reset(Object *child, void *opaque)
+{
+    DeviceState *dev = (DeviceState *) object_dynamic_cast(child, TYPE_DEVICE);
+
+    if (dev) {
+        device_reset(dev);
+    }
+
+    return 0;
+}
+
+static void spapr_phb_reset(DeviceState *qdev)
+{
+    /* Reset the IOMMU state */
+    object_child_foreach(OBJECT(qdev), spapr_phb_children_reset, NULL);
+}
+
+static Property spapr_phb_properties[] = {
+    DEFINE_PROP_UINT32("index", sPAPRPHBState, index, -1),
+    DEFINE_PROP_UINT64("buid", sPAPRPHBState, buid, -1),
+    DEFINE_PROP_UINT32("liobn", sPAPRPHBState, dma_liobn, -1),
+    DEFINE_PROP_UINT64("mem_win_addr", sPAPRPHBState, mem_win_addr, -1),
+    DEFINE_PROP_UINT64("mem_win_size", sPAPRPHBState, mem_win_size,
+                       SPAPR_PCI_MMIO_WIN_SIZE),
+    DEFINE_PROP_UINT64("io_win_addr", sPAPRPHBState, io_win_addr, -1),
+    DEFINE_PROP_UINT64("io_win_size", sPAPRPHBState, io_win_size,
+                       SPAPR_PCI_IO_WIN_SIZE),
+    DEFINE_PROP_BOOL("dynamic-reconfiguration", sPAPRPHBState, dr_enabled,
+                     true),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription vmstate_spapr_pci_lsi = {
+    .name = "spapr_pci/lsi",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_EQUAL(irq, struct spapr_pci_lsi),
+
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static const VMStateDescription vmstate_spapr_pci_msi = {
+    .name = "spapr_pci/msi",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField []) {
+        VMSTATE_UINT32(key, spapr_pci_msi_mig),
+        VMSTATE_UINT32(value.first_irq, spapr_pci_msi_mig),
+        VMSTATE_UINT32(value.num, spapr_pci_msi_mig),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static void spapr_pci_pre_save(void *opaque)
+{
+    sPAPRPHBState *sphb = opaque;
+    GHashTableIter iter;
+    gpointer key, value;
+    int i;
+
+    if (sphb->msi_devs) {
+        g_free(sphb->msi_devs);
+        sphb->msi_devs = NULL;
+    }
+    sphb->msi_devs_num = g_hash_table_size(sphb->msi);
+    if (!sphb->msi_devs_num) {
+        return;
+    }
+    sphb->msi_devs = g_malloc(sphb->msi_devs_num * sizeof(spapr_pci_msi_mig));
+
+    g_hash_table_iter_init(&iter, sphb->msi);
+    for (i = 0; g_hash_table_iter_next(&iter, &key, &value); ++i) {
+        sphb->msi_devs[i].key = *(uint32_t *) key;
+        sphb->msi_devs[i].value = *(spapr_pci_msi *) value;
+    }
+}
+
+static int spapr_pci_post_load(void *opaque, int version_id)
+{
+    sPAPRPHBState *sphb = opaque;
+    gpointer key, value;
+    int i;
+
+    for (i = 0; i < sphb->msi_devs_num; ++i) {
+        key = g_memdup(&sphb->msi_devs[i].key,
+                       sizeof(sphb->msi_devs[i].key));
+        value = g_memdup(&sphb->msi_devs[i].value,
+                         sizeof(sphb->msi_devs[i].value));
+        g_hash_table_insert(sphb->msi, key, value);
+    }
+    if (sphb->msi_devs) {
+        g_free(sphb->msi_devs);
+        sphb->msi_devs = NULL;
+    }
+    sphb->msi_devs_num = 0;
+
+    return 0;
+}
+
+static const VMStateDescription vmstate_spapr_pci = {
+    .name = "spapr_pci",
+    .version_id = 2,
+    .minimum_version_id = 2,
+    .pre_save = spapr_pci_pre_save,
+    .post_load = spapr_pci_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT64_EQUAL(buid, sPAPRPHBState),
+        VMSTATE_UINT32_EQUAL(dma_liobn, sPAPRPHBState),
+        VMSTATE_UINT64_EQUAL(mem_win_addr, sPAPRPHBState),
+        VMSTATE_UINT64_EQUAL(mem_win_size, sPAPRPHBState),
+        VMSTATE_UINT64_EQUAL(io_win_addr, sPAPRPHBState),
+        VMSTATE_UINT64_EQUAL(io_win_size, sPAPRPHBState),
+        VMSTATE_STRUCT_ARRAY(lsi_table, sPAPRPHBState, PCI_NUM_PINS, 0,
+                             vmstate_spapr_pci_lsi, struct spapr_pci_lsi),
+        VMSTATE_INT32(msi_devs_num, sPAPRPHBState),
+        VMSTATE_STRUCT_VARRAY_ALLOC(msi_devs, sPAPRPHBState, msi_devs_num, 0,
+                                    vmstate_spapr_pci_msi, spapr_pci_msi_mig),
+        VMSTATE_END_OF_LIST()
+    },
+};
+
+static const char *spapr_phb_root_bus_path(PCIHostState *host_bridge,
+                                           PCIBus *rootbus)
+{
+    sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(host_bridge);
+
+    return sphb->dtbusname;
+}
+
+static void spapr_phb_class_init(ObjectClass *klass, void *data)
+{
+    PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
+    HotplugHandlerClass *hp = HOTPLUG_HANDLER_CLASS(klass);
+
+    hc->root_bus_path = spapr_phb_root_bus_path;
+    dc->realize = spapr_phb_realize;
+    dc->props = spapr_phb_properties;
+    dc->reset = spapr_phb_reset;
+    dc->vmsd = &vmstate_spapr_pci;
+    set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+    dc->cannot_instantiate_with_device_add_yet = false;
+    spc->finish_realize = spapr_phb_finish_realize;
+    hp->plug = spapr_phb_hot_plug_child;
+    hp->unplug = spapr_phb_hot_unplug_child;
+}
+
+static const TypeInfo spapr_phb_info = {
+    .name          = TYPE_SPAPR_PCI_HOST_BRIDGE,
+    .parent        = TYPE_PCI_HOST_BRIDGE,
+    .instance_size = sizeof(sPAPRPHBState),
+    .class_init    = spapr_phb_class_init,
+    .class_size    = sizeof(sPAPRPHBClass),
+    .interfaces    = (InterfaceInfo[]) {
+        { TYPE_HOTPLUG_HANDLER },
+        { }
+    }
+};
+
+PCIHostState *spapr_create_phb(sPAPRMachineState *spapr, int index)
+{
+    DeviceState *dev;
+
+    dev = qdev_create(NULL, TYPE_SPAPR_PCI_HOST_BRIDGE);
+    qdev_prop_set_uint32(dev, "index", index);
+    qdev_init_nofail(dev);
+
+    return PCI_HOST_BRIDGE(dev);
+}
+
+typedef struct sPAPRFDT {
+    void *fdt;
+    int node_off;
+    sPAPRPHBState *sphb;
+} sPAPRFDT;
+
+static void spapr_populate_pci_devices_dt(PCIBus *bus, PCIDevice *pdev,
+                                          void *opaque)
+{
+    PCIBus *sec_bus;
+    sPAPRFDT *p = opaque;
+    int offset;
+    sPAPRFDT s_fdt;
+
+    offset = spapr_create_pci_child_dt(p->sphb, pdev, p->fdt, p->node_off);
+    if (!offset) {
+        error_report("Failed to create pci child device tree node");
+        return;
+    }
+
+    if ((pci_default_read_config(pdev, PCI_HEADER_TYPE, 1) !=
+         PCI_HEADER_TYPE_BRIDGE)) {
+        return;
+    }
+
+    sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
+    if (!sec_bus) {
+        return;
+    }
+
+    s_fdt.fdt = p->fdt;
+    s_fdt.node_off = offset;
+    s_fdt.sphb = p->sphb;
+    pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
+                        spapr_populate_pci_devices_dt,
+                        &s_fdt);
+}
+
+static void spapr_phb_pci_enumerate_bridge(PCIBus *bus, PCIDevice *pdev,
+                                           void *opaque)
+{
+    unsigned int *bus_no = opaque;
+    unsigned int primary = *bus_no;
+    unsigned int subordinate = 0xff;
+    PCIBus *sec_bus = NULL;
+
+    if ((pci_default_read_config(pdev, PCI_HEADER_TYPE, 1) !=
+         PCI_HEADER_TYPE_BRIDGE)) {
+        return;
+    }
+
+    (*bus_no)++;
+    pci_default_write_config(pdev, PCI_PRIMARY_BUS, primary, 1);
+    pci_default_write_config(pdev, PCI_SECONDARY_BUS, *bus_no, 1);
+    pci_default_write_config(pdev, PCI_SUBORDINATE_BUS, *bus_no, 1);
+
+    sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(pdev));
+    if (!sec_bus) {
+        return;
+    }
+
+    pci_default_write_config(pdev, PCI_SUBORDINATE_BUS, subordinate, 1);
+    pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
+                        spapr_phb_pci_enumerate_bridge, bus_no);
+    pci_default_write_config(pdev, PCI_SUBORDINATE_BUS, *bus_no, 1);
+}
+
+static void spapr_phb_pci_enumerate(sPAPRPHBState *phb)
+{
+    PCIBus *bus = PCI_HOST_BRIDGE(phb)->bus;
+    unsigned int bus_no = 0;
+
+    pci_for_each_device(bus, pci_bus_num(bus),
+                        spapr_phb_pci_enumerate_bridge,
+                        &bus_no);
+
+}
+
+int spapr_populate_pci_dt(sPAPRPHBState *phb,
+                          uint32_t xics_phandle,
+                          void *fdt)
+{
+    int bus_off, i, j, ret;
+    char nodename[FDT_NAME_MAX];
+    uint32_t bus_range[] = { cpu_to_be32(0), cpu_to_be32(0xff) };
+    const uint64_t mmiosize = memory_region_size(&phb->memwindow);
+    const uint64_t w32max = (1ULL << 32) - SPAPR_PCI_MEM_WIN_BUS_OFFSET;
+    const uint64_t w32size = MIN(w32max, mmiosize);
+    const uint64_t w64size = (mmiosize > w32size) ? (mmiosize - w32size) : 0;
+    struct {
+        uint32_t hi;
+        uint64_t child;
+        uint64_t parent;
+        uint64_t size;
+    } QEMU_PACKED ranges[] = {
+        {
+            cpu_to_be32(b_ss(1)), cpu_to_be64(0),
+            cpu_to_be64(phb->io_win_addr),
+            cpu_to_be64(memory_region_size(&phb->iospace)),
+        },
+        {
+            cpu_to_be32(b_ss(2)), cpu_to_be64(SPAPR_PCI_MEM_WIN_BUS_OFFSET),
+            cpu_to_be64(phb->mem_win_addr),
+            cpu_to_be64(w32size),
+        },
+        {
+            cpu_to_be32(b_ss(3)), cpu_to_be64(1ULL << 32),
+            cpu_to_be64(phb->mem_win_addr + w32size),
+            cpu_to_be64(w64size)
+        },
+    };
+    const unsigned sizeof_ranges = (w64size ? 3 : 2) * sizeof(ranges[0]);
+    uint64_t bus_reg[] = { cpu_to_be64(phb->buid), 0 };
+    uint32_t interrupt_map_mask[] = {
+        cpu_to_be32(b_ddddd(-1)|b_fff(0)), 0x0, 0x0, cpu_to_be32(-1)};
+    uint32_t interrupt_map[PCI_SLOT_MAX * PCI_NUM_PINS][7];
+    sPAPRTCETable *tcet;
+    PCIBus *bus = PCI_HOST_BRIDGE(phb)->bus;
+    sPAPRFDT s_fdt;
+
+    /* Start populating the FDT */
+    snprintf(nodename, FDT_NAME_MAX, "pci@%" PRIx64, phb->buid);
+    bus_off = fdt_add_subnode(fdt, 0, nodename);
+    if (bus_off < 0) {
+        return bus_off;
+    }
+
+    /* Write PHB properties */
+    _FDT(fdt_setprop_string(fdt, bus_off, "device_type", "pci"));
+    _FDT(fdt_setprop_string(fdt, bus_off, "compatible", "IBM,Logical_PHB"));
+    _FDT(fdt_setprop_cell(fdt, bus_off, "#address-cells", 0x3));
+    _FDT(fdt_setprop_cell(fdt, bus_off, "#size-cells", 0x2));
+    _FDT(fdt_setprop_cell(fdt, bus_off, "#interrupt-cells", 0x1));
+    _FDT(fdt_setprop(fdt, bus_off, "used-by-rtas", NULL, 0));
+    _FDT(fdt_setprop(fdt, bus_off, "bus-range", &bus_range, sizeof(bus_range)));
+    _FDT(fdt_setprop(fdt, bus_off, "ranges", &ranges, sizeof_ranges));
+    _FDT(fdt_setprop(fdt, bus_off, "reg", &bus_reg, sizeof(bus_reg)));
+    _FDT(fdt_setprop_cell(fdt, bus_off, "ibm,pci-config-space-type", 0x1));
+    _FDT(fdt_setprop_cell(fdt, bus_off, "ibm,pe-total-#msi", XICS_IRQS));
+
+    /* Build the interrupt-map, this must matches what is done
+     * in pci_spapr_map_irq
+     */
+    _FDT(fdt_setprop(fdt, bus_off, "interrupt-map-mask",
+                     &interrupt_map_mask, sizeof(interrupt_map_mask)));
+    for (i = 0; i < PCI_SLOT_MAX; i++) {
+        for (j = 0; j < PCI_NUM_PINS; j++) {
+            uint32_t *irqmap = interrupt_map[i*PCI_NUM_PINS + j];
+            int lsi_num = pci_spapr_swizzle(i, j);
+
+            irqmap[0] = cpu_to_be32(b_ddddd(i)|b_fff(0));
+            irqmap[1] = 0;
+            irqmap[2] = 0;
+            irqmap[3] = cpu_to_be32(j+1);
+            irqmap[4] = cpu_to_be32(xics_phandle);
+            irqmap[5] = cpu_to_be32(phb->lsi_table[lsi_num].irq);
+            irqmap[6] = cpu_to_be32(0x8);
+        }
+    }
+    /* Write interrupt map */
+    _FDT(fdt_setprop(fdt, bus_off, "interrupt-map", &interrupt_map,
+                     sizeof(interrupt_map)));
+
+    tcet = spapr_tce_find_by_liobn(SPAPR_PCI_LIOBN(phb->index, 0));
+    spapr_dma_dt(fdt, bus_off, "ibm,dma-window",
+                 tcet->liobn, tcet->bus_offset,
+                 tcet->nb_table << tcet->page_shift);
+
+    /* Walk the bridges and program the bus numbers*/
+    spapr_phb_pci_enumerate(phb);
+    _FDT(fdt_setprop_cell(fdt, bus_off, "qemu,phb-enumerated", 0x1));
+
+    /* Populate tree nodes with PCI devices attached */
+    s_fdt.fdt = fdt;
+    s_fdt.node_off = bus_off;
+    s_fdt.sphb = phb;
+    pci_for_each_device(bus, pci_bus_num(bus),
+                        spapr_populate_pci_devices_dt,
+                        &s_fdt);
+
+    ret = spapr_drc_populate_dt(fdt, bus_off, OBJECT(phb),
+                                SPAPR_DR_CONNECTOR_TYPE_PCI);
+    if (ret) {
+        return ret;
+    }
+
+    return 0;
+}
+
+void spapr_pci_rtas_init(void)
+{
+    spapr_rtas_register(RTAS_READ_PCI_CONFIG, "read-pci-config",
+                        rtas_read_pci_config);
+    spapr_rtas_register(RTAS_WRITE_PCI_CONFIG, "write-pci-config",
+                        rtas_write_pci_config);
+    spapr_rtas_register(RTAS_IBM_READ_PCI_CONFIG, "ibm,read-pci-config",
+                        rtas_ibm_read_pci_config);
+    spapr_rtas_register(RTAS_IBM_WRITE_PCI_CONFIG, "ibm,write-pci-config",
+                        rtas_ibm_write_pci_config);
+    if (msi_supported) {
+        spapr_rtas_register(RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER,
+                            "ibm,query-interrupt-source-number",
+                            rtas_ibm_query_interrupt_source_number);
+        spapr_rtas_register(RTAS_IBM_CHANGE_MSI, "ibm,change-msi",
+                            rtas_ibm_change_msi);
+    }
+
+    spapr_rtas_register(RTAS_IBM_SET_EEH_OPTION,
+                        "ibm,set-eeh-option",
+                        rtas_ibm_set_eeh_option);
+    spapr_rtas_register(RTAS_IBM_GET_CONFIG_ADDR_INFO2,
+                        "ibm,get-config-addr-info2",
+                        rtas_ibm_get_config_addr_info2);
+    spapr_rtas_register(RTAS_IBM_READ_SLOT_RESET_STATE2,
+                        "ibm,read-slot-reset-state2",
+                        rtas_ibm_read_slot_reset_state2);
+    spapr_rtas_register(RTAS_IBM_SET_SLOT_RESET,
+                        "ibm,set-slot-reset",
+                        rtas_ibm_set_slot_reset);
+    spapr_rtas_register(RTAS_IBM_CONFIGURE_PE,
+                        "ibm,configure-pe",
+                        rtas_ibm_configure_pe);
+    spapr_rtas_register(RTAS_IBM_SLOT_ERROR_DETAIL,
+                        "ibm,slot-error-detail",
+                        rtas_ibm_slot_error_detail);
+}
+
+static void spapr_pci_register_types(void)
+{
+    type_register_static(&spapr_phb_info);
+}
+
+type_init(spapr_pci_register_types)
+
+static int spapr_switch_one_vga(DeviceState *dev, void *opaque)
+{
+    bool be = *(bool *)opaque;
+
+    if (object_dynamic_cast(OBJECT(dev), "VGA")
+        || object_dynamic_cast(OBJECT(dev), "secondary-vga")) {
+        object_property_set_bool(OBJECT(dev), be, "big-endian-framebuffer",
+                                 &error_abort);
+    }
+    return 0;
+}
+
+void spapr_pci_switch_vga(bool big_endian)
+{
+    sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
+    sPAPRPHBState *sphb;
+
+    /*
+     * For backward compatibility with existing guests, we switch
+     * the endianness of the VGA controller when changing the guest
+     * interrupt mode
+     */
+    QLIST_FOREACH(sphb, &spapr->phbs, list) {
+        BusState *bus = &PCI_HOST_BRIDGE(sphb)->bus->qbus;
+        qbus_walk_children(bus, spapr_switch_one_vga, NULL, NULL, NULL,
+                           &big_endian);
+    }
+}