diff options
author | Yang Zhang <yang.z.zhang@intel.com> | 2015-08-28 09:58:54 +0800 |
---|---|---|
committer | Yang Zhang <yang.z.zhang@intel.com> | 2015-09-01 12:44:00 +0800 |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/net/smc91c111.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/net/smc91c111.c')
-rw-r--r-- | qemu/hw/net/smc91c111.c | 807 |
1 files changed, 807 insertions, 0 deletions
diff --git a/qemu/hw/net/smc91c111.c b/qemu/hw/net/smc91c111.c new file mode 100644 index 000000000..74e06e6c7 --- /dev/null +++ b/qemu/hw/net/smc91c111.c @@ -0,0 +1,807 @@ +/* + * SMSC 91C111 Ethernet interface emulation + * + * Copyright (c) 2005 CodeSourcery, LLC. + * Written by Paul Brook + * + * This code is licensed under the GPL + */ + +#include "hw/sysbus.h" +#include "net/net.h" +#include "hw/devices.h" +/* For crc32 */ +#include <zlib.h> + +/* Number of 2k memory pages available. */ +#define NUM_PACKETS 4 + +#define TYPE_SMC91C111 "smc91c111" +#define SMC91C111(obj) OBJECT_CHECK(smc91c111_state, (obj), TYPE_SMC91C111) + +typedef struct { + SysBusDevice parent_obj; + + NICState *nic; + NICConf conf; + uint16_t tcr; + uint16_t rcr; + uint16_t cr; + uint16_t ctr; + uint16_t gpr; + uint16_t ptr; + uint16_t ercv; + qemu_irq irq; + int bank; + int packet_num; + int tx_alloc; + /* Bitmask of allocated packets. */ + int allocated; + int tx_fifo_len; + int tx_fifo[NUM_PACKETS]; + int rx_fifo_len; + int rx_fifo[NUM_PACKETS]; + int tx_fifo_done_len; + int tx_fifo_done[NUM_PACKETS]; + /* Packet buffer memory. */ + uint8_t data[NUM_PACKETS][2048]; + uint8_t int_level; + uint8_t int_mask; + MemoryRegion mmio; +} smc91c111_state; + +static const VMStateDescription vmstate_smc91c111 = { + .name = "smc91c111", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT16(tcr, smc91c111_state), + VMSTATE_UINT16(rcr, smc91c111_state), + VMSTATE_UINT16(cr, smc91c111_state), + VMSTATE_UINT16(ctr, smc91c111_state), + VMSTATE_UINT16(gpr, smc91c111_state), + VMSTATE_UINT16(ptr, smc91c111_state), + VMSTATE_UINT16(ercv, smc91c111_state), + VMSTATE_INT32(bank, smc91c111_state), + VMSTATE_INT32(packet_num, smc91c111_state), + VMSTATE_INT32(tx_alloc, smc91c111_state), + VMSTATE_INT32(allocated, smc91c111_state), + VMSTATE_INT32(tx_fifo_len, smc91c111_state), + VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS), + VMSTATE_INT32(rx_fifo_len, smc91c111_state), + VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS), + VMSTATE_INT32(tx_fifo_done_len, smc91c111_state), + VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS), + VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048), + VMSTATE_UINT8(int_level, smc91c111_state), + VMSTATE_UINT8(int_mask, smc91c111_state), + VMSTATE_END_OF_LIST() + } +}; + +#define RCR_SOFT_RST 0x8000 +#define RCR_STRIP_CRC 0x0200 +#define RCR_RXEN 0x0100 + +#define TCR_EPH_LOOP 0x2000 +#define TCR_NOCRC 0x0100 +#define TCR_PAD_EN 0x0080 +#define TCR_FORCOL 0x0004 +#define TCR_LOOP 0x0002 +#define TCR_TXEN 0x0001 + +#define INT_MD 0x80 +#define INT_ERCV 0x40 +#define INT_EPH 0x20 +#define INT_RX_OVRN 0x10 +#define INT_ALLOC 0x08 +#define INT_TX_EMPTY 0x04 +#define INT_TX 0x02 +#define INT_RCV 0x01 + +#define CTR_AUTO_RELEASE 0x0800 +#define CTR_RELOAD 0x0002 +#define CTR_STORE 0x0001 + +#define RS_ALGNERR 0x8000 +#define RS_BRODCAST 0x4000 +#define RS_BADCRC 0x2000 +#define RS_ODDFRAME 0x1000 +#define RS_TOOLONG 0x0800 +#define RS_TOOSHORT 0x0400 +#define RS_MULTICAST 0x0001 + +/* Update interrupt status. */ +static void smc91c111_update(smc91c111_state *s) +{ + int level; + + if (s->tx_fifo_len == 0) + s->int_level |= INT_TX_EMPTY; + if (s->tx_fifo_done_len != 0) + s->int_level |= INT_TX; + level = (s->int_level & s->int_mask) != 0; + qemu_set_irq(s->irq, level); +} + +/* Try to allocate a packet. Returns 0x80 on failure. */ +static int smc91c111_allocate_packet(smc91c111_state *s) +{ + int i; + if (s->allocated == (1 << NUM_PACKETS) - 1) { + return 0x80; + } + + for (i = 0; i < NUM_PACKETS; i++) { + if ((s->allocated & (1 << i)) == 0) + break; + } + s->allocated |= 1 << i; + return i; +} + + +/* Process a pending TX allocate. */ +static void smc91c111_tx_alloc(smc91c111_state *s) +{ + s->tx_alloc = smc91c111_allocate_packet(s); + if (s->tx_alloc == 0x80) + return; + s->int_level |= INT_ALLOC; + smc91c111_update(s); +} + +/* Remove and item from the RX FIFO. */ +static void smc91c111_pop_rx_fifo(smc91c111_state *s) +{ + int i; + + s->rx_fifo_len--; + if (s->rx_fifo_len) { + for (i = 0; i < s->rx_fifo_len; i++) + s->rx_fifo[i] = s->rx_fifo[i + 1]; + s->int_level |= INT_RCV; + } else { + s->int_level &= ~INT_RCV; + } + smc91c111_update(s); +} + +/* Remove an item from the TX completion FIFO. */ +static void smc91c111_pop_tx_fifo_done(smc91c111_state *s) +{ + int i; + + if (s->tx_fifo_done_len == 0) + return; + s->tx_fifo_done_len--; + for (i = 0; i < s->tx_fifo_done_len; i++) + s->tx_fifo_done[i] = s->tx_fifo_done[i + 1]; +} + +/* Release the memory allocated to a packet. */ +static void smc91c111_release_packet(smc91c111_state *s, int packet) +{ + s->allocated &= ~(1 << packet); + if (s->tx_alloc == 0x80) + smc91c111_tx_alloc(s); + qemu_flush_queued_packets(qemu_get_queue(s->nic)); +} + +/* Flush the TX FIFO. */ +static void smc91c111_do_tx(smc91c111_state *s) +{ + int i; + int len; + int control; + int packetnum; + uint8_t *p; + + if ((s->tcr & TCR_TXEN) == 0) + return; + if (s->tx_fifo_len == 0) + return; + for (i = 0; i < s->tx_fifo_len; i++) { + packetnum = s->tx_fifo[i]; + p = &s->data[packetnum][0]; + /* Set status word. */ + *(p++) = 0x01; + *(p++) = 0x40; + len = *(p++); + len |= ((int)*(p++)) << 8; + len -= 6; + control = p[len + 1]; + if (control & 0x20) + len++; + /* ??? This overwrites the data following the buffer. + Don't know what real hardware does. */ + if (len < 64 && (s->tcr & TCR_PAD_EN)) { + memset(p + len, 0, 64 - len); + len = 64; + } +#if 0 + { + int add_crc; + + /* The card is supposed to append the CRC to the frame. + However none of the other network traffic has the CRC + appended. Suspect this is low level ethernet detail we + don't need to worry about. */ + add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0; + if (add_crc) { + uint32_t crc; + + crc = crc32(~0, p, len); + memcpy(p + len, &crc, 4); + len += 4; + } + } +#endif + if (s->ctr & CTR_AUTO_RELEASE) + /* Race? */ + smc91c111_release_packet(s, packetnum); + else if (s->tx_fifo_done_len < NUM_PACKETS) + s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum; + qemu_send_packet(qemu_get_queue(s->nic), p, len); + } + s->tx_fifo_len = 0; + smc91c111_update(s); +} + +/* Add a packet to the TX FIFO. */ +static void smc91c111_queue_tx(smc91c111_state *s, int packet) +{ + if (s->tx_fifo_len == NUM_PACKETS) + return; + s->tx_fifo[s->tx_fifo_len++] = packet; + smc91c111_do_tx(s); +} + +static void smc91c111_reset(DeviceState *dev) +{ + smc91c111_state *s = SMC91C111(dev); + + s->bank = 0; + s->tx_fifo_len = 0; + s->tx_fifo_done_len = 0; + s->rx_fifo_len = 0; + s->allocated = 0; + s->packet_num = 0; + s->tx_alloc = 0; + s->tcr = 0; + s->rcr = 0; + s->cr = 0xa0b1; + s->ctr = 0x1210; + s->ptr = 0; + s->ercv = 0x1f; + s->int_level = INT_TX_EMPTY; + s->int_mask = 0; + smc91c111_update(s); +} + +#define SET_LOW(name, val) s->name = (s->name & 0xff00) | val +#define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8) + +static void smc91c111_writeb(void *opaque, hwaddr offset, + uint32_t value) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + + offset = offset & 0xf; + if (offset == 14) { + s->bank = value; + return; + } + if (offset == 15) + return; + switch (s->bank) { + case 0: + switch (offset) { + case 0: /* TCR */ + SET_LOW(tcr, value); + return; + case 1: + SET_HIGH(tcr, value); + return; + case 4: /* RCR */ + SET_LOW(rcr, value); + return; + case 5: + SET_HIGH(rcr, value); + if (s->rcr & RCR_SOFT_RST) { + smc91c111_reset(DEVICE(s)); + } + return; + case 10: case 11: /* RPCR */ + /* Ignored */ + return; + case 12: case 13: /* Reserved */ + return; + } + break; + + case 1: + switch (offset) { + case 0: /* CONFIG */ + SET_LOW(cr, value); + return; + case 1: + SET_HIGH(cr,value); + return; + case 2: case 3: /* BASE */ + case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ + /* Not implemented. */ + return; + case 10: /* Genral Purpose */ + SET_LOW(gpr, value); + return; + case 11: + SET_HIGH(gpr, value); + return; + case 12: /* Control */ + if (value & 1) + fprintf(stderr, "smc91c111:EEPROM store not implemented\n"); + if (value & 2) + fprintf(stderr, "smc91c111:EEPROM reload not implemented\n"); + value &= ~3; + SET_LOW(ctr, value); + return; + case 13: + SET_HIGH(ctr, value); + return; + } + break; + + case 2: + switch (offset) { + case 0: /* MMU Command */ + switch (value >> 5) { + case 0: /* no-op */ + break; + case 1: /* Allocate for TX. */ + s->tx_alloc = 0x80; + s->int_level &= ~INT_ALLOC; + smc91c111_update(s); + smc91c111_tx_alloc(s); + break; + case 2: /* Reset MMU. */ + s->allocated = 0; + s->tx_fifo_len = 0; + s->tx_fifo_done_len = 0; + s->rx_fifo_len = 0; + s->tx_alloc = 0; + break; + case 3: /* Remove from RX FIFO. */ + smc91c111_pop_rx_fifo(s); + break; + case 4: /* Remove from RX FIFO and release. */ + if (s->rx_fifo_len > 0) { + smc91c111_release_packet(s, s->rx_fifo[0]); + } + smc91c111_pop_rx_fifo(s); + break; + case 5: /* Release. */ + smc91c111_release_packet(s, s->packet_num); + break; + case 6: /* Add to TX FIFO. */ + smc91c111_queue_tx(s, s->packet_num); + break; + case 7: /* Reset TX FIFO. */ + s->tx_fifo_len = 0; + s->tx_fifo_done_len = 0; + break; + } + return; + case 1: + /* Ignore. */ + return; + case 2: /* Packet Number Register */ + s->packet_num = value; + return; + case 3: case 4: case 5: + /* Should be readonly, but linux writes to them anyway. Ignore. */ + return; + case 6: /* Pointer */ + SET_LOW(ptr, value); + return; + case 7: + SET_HIGH(ptr, value); + return; + case 8: case 9: case 10: case 11: /* Data */ + { + int p; + int n; + + if (s->ptr & 0x8000) + n = s->rx_fifo[0]; + else + n = s->packet_num; + p = s->ptr & 0x07ff; + if (s->ptr & 0x4000) { + s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff); + } else { + p += (offset & 3); + } + s->data[n][p] = value; + } + return; + case 12: /* Interrupt ACK. */ + s->int_level &= ~(value & 0xd6); + if (value & INT_TX) + smc91c111_pop_tx_fifo_done(s); + smc91c111_update(s); + return; + case 13: /* Interrupt mask. */ + s->int_mask = value; + smc91c111_update(s); + return; + } + break; + + case 3: + switch (offset) { + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: + /* Multicast table. */ + /* Not implemented. */ + return; + case 8: case 9: /* Management Interface. */ + /* Not implemented. */ + return; + case 12: /* Early receive. */ + s->ercv = value & 0x1f; + return; + case 13: + /* Ignore. */ + return; + } + break; + } + hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset); +} + +static uint32_t smc91c111_readb(void *opaque, hwaddr offset) +{ + smc91c111_state *s = (smc91c111_state *)opaque; + + offset = offset & 0xf; + if (offset == 14) { + return s->bank; + } + if (offset == 15) + return 0x33; + switch (s->bank) { + case 0: + switch (offset) { + case 0: /* TCR */ + return s->tcr & 0xff; + case 1: + return s->tcr >> 8; + case 2: /* EPH Status */ + return 0; + case 3: + return 0x40; + case 4: /* RCR */ + return s->rcr & 0xff; + case 5: + return s->rcr >> 8; + case 6: /* Counter */ + case 7: + /* Not implemented. */ + return 0; + case 8: /* Memory size. */ + return NUM_PACKETS; + case 9: /* Free memory available. */ + { + int i; + int n; + n = 0; + for (i = 0; i < NUM_PACKETS; i++) { + if (s->allocated & (1 << i)) + n++; + } + return n; + } + case 10: case 11: /* RPCR */ + /* Not implemented. */ + return 0; + case 12: case 13: /* Reserved */ + return 0; + } + break; + + case 1: + switch (offset) { + case 0: /* CONFIG */ + return s->cr & 0xff; + case 1: + return s->cr >> 8; + case 2: case 3: /* BASE */ + /* Not implemented. */ + return 0; + case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ + return s->conf.macaddr.a[offset - 4]; + case 10: /* General Purpose */ + return s->gpr & 0xff; + case 11: + return s->gpr >> 8; + case 12: /* Control */ + return s->ctr & 0xff; + case 13: + return s->ctr >> 8; + } + break; + + case 2: + switch (offset) { + case 0: case 1: /* MMUCR Busy bit. */ + return 0; + case 2: /* Packet Number. */ + return s->packet_num; + case 3: /* Allocation Result. */ + return s->tx_alloc; + case 4: /* TX FIFO */ + if (s->tx_fifo_done_len == 0) + return 0x80; + else + return s->tx_fifo_done[0]; + case 5: /* RX FIFO */ + if (s->rx_fifo_len == 0) + return 0x80; + else + return s->rx_fifo[0]; + case 6: /* Pointer */ + return s->ptr & 0xff; + case 7: + return (s->ptr >> 8) & 0xf7; + case 8: case 9: case 10: case 11: /* Data */ + { + int p; + int n; + + if (s->ptr & 0x8000) + n = s->rx_fifo[0]; + else + n = s->packet_num; + p = s->ptr & 0x07ff; + if (s->ptr & 0x4000) { + s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff); + } else { + p += (offset & 3); + } + return s->data[n][p]; + } + case 12: /* Interrupt status. */ + return s->int_level; + case 13: /* Interrupt mask. */ + return s->int_mask; + } + break; + + case 3: + switch (offset) { + case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7: + /* Multicast table. */ + /* Not implemented. */ + return 0; + case 8: /* Management Interface. */ + /* Not implemented. */ + return 0x30; + case 9: + return 0x33; + case 10: /* Revision. */ + return 0x91; + case 11: + return 0x33; + case 12: + return s->ercv; + case 13: + return 0; + } + break; + } + hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset); + return 0; +} + +static void smc91c111_writew(void *opaque, hwaddr offset, + uint32_t value) +{ + smc91c111_writeb(opaque, offset, value & 0xff); + smc91c111_writeb(opaque, offset + 1, value >> 8); +} + +static void smc91c111_writel(void *opaque, hwaddr offset, + uint32_t value) +{ + /* 32-bit writes to offset 0xc only actually write to the bank select + register (offset 0xe) */ + if (offset != 0xc) + smc91c111_writew(opaque, offset, value & 0xffff); + smc91c111_writew(opaque, offset + 2, value >> 16); +} + +static uint32_t smc91c111_readw(void *opaque, hwaddr offset) +{ + uint32_t val; + val = smc91c111_readb(opaque, offset); + val |= smc91c111_readb(opaque, offset + 1) << 8; + return val; +} + +static uint32_t smc91c111_readl(void *opaque, hwaddr offset) +{ + uint32_t val; + val = smc91c111_readw(opaque, offset); + val |= smc91c111_readw(opaque, offset + 2) << 16; + return val; +} + +static int smc91c111_can_receive(NetClientState *nc) +{ + smc91c111_state *s = qemu_get_nic_opaque(nc); + + if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) + return 1; + if (s->allocated == (1 << NUM_PACKETS) - 1) + return 0; + return 1; +} + +static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size) +{ + smc91c111_state *s = qemu_get_nic_opaque(nc); + int status; + int packetsize; + uint32_t crc; + int packetnum; + uint8_t *p; + + if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST)) + return -1; + /* Short packets are padded with zeros. Receiving a packet + < 64 bytes long is considered an error condition. */ + if (size < 64) + packetsize = 64; + else + packetsize = (size & ~1); + packetsize += 6; + crc = (s->rcr & RCR_STRIP_CRC) == 0; + if (crc) + packetsize += 4; + /* TODO: Flag overrun and receive errors. */ + if (packetsize > 2048) + return -1; + packetnum = smc91c111_allocate_packet(s); + if (packetnum == 0x80) + return -1; + s->rx_fifo[s->rx_fifo_len++] = packetnum; + + p = &s->data[packetnum][0]; + /* ??? Multicast packets? */ + status = 0; + if (size > 1518) + status |= RS_TOOLONG; + if (size & 1) + status |= RS_ODDFRAME; + *(p++) = status & 0xff; + *(p++) = status >> 8; + *(p++) = packetsize & 0xff; + *(p++) = packetsize >> 8; + memcpy(p, buf, size & ~1); + p += (size & ~1); + /* Pad short packets. */ + if (size < 64) { + int pad; + + if (size & 1) + *(p++) = buf[size - 1]; + pad = 64 - size; + memset(p, 0, pad); + p += pad; + size = 64; + } + /* It's not clear if the CRC should go before or after the last byte in + odd sized packets. Linux disables the CRC, so that's no help. + The pictures in the documentation show the CRC aligned on a 16-bit + boundary before the last odd byte, so that's what we do. */ + if (crc) { + crc = crc32(~0, buf, size); + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; crc >>= 8; + *(p++) = crc & 0xff; + } + if (size & 1) { + *(p++) = buf[size - 1]; + *p = 0x60; + } else { + *(p++) = 0; + *p = 0x40; + } + /* TODO: Raise early RX interrupt? */ + s->int_level |= INT_RCV; + smc91c111_update(s); + + return size; +} + +static const MemoryRegionOps smc91c111_mem_ops = { + /* The special case for 32 bit writes to 0xc means we can't just + * set .impl.min/max_access_size to 1, unfortunately + */ + .old_mmio = { + .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, }, + .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static NetClientInfo net_smc91c111_info = { + .type = NET_CLIENT_OPTIONS_KIND_NIC, + .size = sizeof(NICState), + .can_receive = smc91c111_can_receive, + .receive = smc91c111_receive, +}; + +static int smc91c111_init1(SysBusDevice *sbd) +{ + DeviceState *dev = DEVICE(sbd); + smc91c111_state *s = SMC91C111(dev); + + memory_region_init_io(&s->mmio, OBJECT(s), &smc91c111_mem_ops, s, + "smc91c111-mmio", 16); + sysbus_init_mmio(sbd, &s->mmio); + sysbus_init_irq(sbd, &s->irq); + qemu_macaddr_default_if_unset(&s->conf.macaddr); + s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf, + object_get_typename(OBJECT(dev)), dev->id, s); + qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); + /* ??? Save/restore. */ + return 0; +} + +static Property smc91c111_properties[] = { + DEFINE_NIC_PROPERTIES(smc91c111_state, conf), + DEFINE_PROP_END_OF_LIST(), +}; + +static void smc91c111_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); + + k->init = smc91c111_init1; + dc->reset = smc91c111_reset; + dc->vmsd = &vmstate_smc91c111; + dc->props = smc91c111_properties; +} + +static const TypeInfo smc91c111_info = { + .name = TYPE_SMC91C111, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(smc91c111_state), + .class_init = smc91c111_class_init, +}; + +static void smc91c111_register_types(void) +{ + type_register_static(&smc91c111_info); +} + +/* Legacy helper function. Should go away when machine config files are + implemented. */ +void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq) +{ + DeviceState *dev; + SysBusDevice *s; + + qemu_check_nic_model(nd, "smc91c111"); + dev = qdev_create(NULL, TYPE_SMC91C111); + qdev_set_nic_properties(dev, nd); + qdev_init_nofail(dev); + s = SYS_BUS_DEVICE(dev); + sysbus_mmio_map(s, 0, base); + sysbus_connect_irq(s, 0, irq); +} + +type_init(smc91c111_register_types) |