diff options
author | 2017-04-25 03:31:15 -0700 | |
---|---|---|
committer | 2017-05-22 06:48:08 +0000 | |
commit | bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 (patch) | |
tree | ca11e03542edf2d8f631efeca5e1626d211107e3 /qemu/hw/net/eepro100.c | |
parent | a14b48d18a9ed03ec191cf16b162206998a895ce (diff) |
Adding qemu as a submodule of KVMFORNFV
This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>
Diffstat (limited to 'qemu/hw/net/eepro100.c')
-rw-r--r-- | qemu/hw/net/eepro100.c | 2114 |
1 files changed, 0 insertions, 2114 deletions
diff --git a/qemu/hw/net/eepro100.c b/qemu/hw/net/eepro100.c deleted file mode 100644 index 9b4b9b59d..000000000 --- a/qemu/hw/net/eepro100.c +++ /dev/null @@ -1,2114 +0,0 @@ -/* - * QEMU i8255x (PRO100) emulation - * - * Copyright (C) 2006-2011 Stefan Weil - * - * Portions of the code are copies from grub / etherboot eepro100.c - * and linux e100.c. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) version 3 or any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Tested features (i82559): - * PXE boot (i386 guest, i386 / mips / mipsel / ppc host) ok - * Linux networking (i386) ok - * - * Untested: - * Windows networking - * - * References: - * - * Intel 8255x 10/100 Mbps Ethernet Controller Family - * Open Source Software Developer Manual - * - * TODO: - * * PHY emulation should be separated from nic emulation. - * Most nic emulations could share the same phy code. - * * i82550 is untested. It is programmed like the i82559. - * * i82562 is untested. It is programmed like the i82559. - * * Power management (i82558 and later) is not implemented. - * * Wake-on-LAN is not implemented. - */ - -#include "qemu/osdep.h" -#include "hw/hw.h" -#include "hw/pci/pci.h" -#include "net/net.h" -#include "hw/nvram/eeprom93xx.h" -#include "sysemu/sysemu.h" -#include "sysemu/dma.h" -#include "qemu/bitops.h" - -/* QEMU sends frames smaller than 60 bytes to ethernet nics. - * Such frames are rejected by real nics and their emulations. - * To avoid this behaviour, other nic emulations pad received - * frames. The following definition enables this padding for - * eepro100, too. We keep the define around in case it might - * become useful the future if the core networking is ever - * changed to pad short packets itself. */ -#define CONFIG_PAD_RECEIVED_FRAMES - -#define KiB 1024 - -/* Debug EEPRO100 card. */ -#if 0 -# define DEBUG_EEPRO100 -#endif - -#ifdef DEBUG_EEPRO100 -#define logout(fmt, ...) fprintf(stderr, "EE100\t%-24s" fmt, __func__, ## __VA_ARGS__) -#else -#define logout(fmt, ...) ((void)0) -#endif - -/* Set flags to 0 to disable debug output. */ -#define INT 1 /* interrupt related actions */ -#define MDI 1 /* mdi related actions */ -#define OTHER 1 -#define RXTX 1 -#define EEPROM 1 /* eeprom related actions */ - -#define TRACE(flag, command) ((flag) ? (command) : (void)0) - -#define missing(text) fprintf(stderr, "eepro100: feature is missing in this emulation: " text "\n") - -#define MAX_ETH_FRAME_SIZE 1514 - -/* This driver supports several different devices which are declared here. */ -#define i82550 0x82550 -#define i82551 0x82551 -#define i82557A 0x82557a -#define i82557B 0x82557b -#define i82557C 0x82557c -#define i82558A 0x82558a -#define i82558B 0x82558b -#define i82559A 0x82559a -#define i82559B 0x82559b -#define i82559C 0x82559c -#define i82559ER 0x82559e -#define i82562 0x82562 -#define i82801 0x82801 - -/* Use 64 word EEPROM. TODO: could be a runtime option. */ -#define EEPROM_SIZE 64 - -#define PCI_MEM_SIZE (4 * KiB) -#define PCI_IO_SIZE 64 -#define PCI_FLASH_SIZE (128 * KiB) - -#define BITS(n, m) (((0xffffffffU << (31 - n)) >> (31 - n + m)) << m) - -/* The SCB accepts the following controls for the Tx and Rx units: */ -#define CU_NOP 0x0000 /* No operation. */ -#define CU_START 0x0010 /* CU start. */ -#define CU_RESUME 0x0020 /* CU resume. */ -#define CU_STATSADDR 0x0040 /* Load dump counters address. */ -#define CU_SHOWSTATS 0x0050 /* Dump statistical counters. */ -#define CU_CMD_BASE 0x0060 /* Load CU base address. */ -#define CU_DUMPSTATS 0x0070 /* Dump and reset statistical counters. */ -#define CU_SRESUME 0x00a0 /* CU static resume. */ - -#define RU_NOP 0x0000 -#define RX_START 0x0001 -#define RX_RESUME 0x0002 -#define RU_ABORT 0x0004 -#define RX_ADDR_LOAD 0x0006 -#define RX_RESUMENR 0x0007 -#define INT_MASK 0x0100 -#define DRVR_INT 0x0200 /* Driver generated interrupt. */ - -typedef struct { - const char *name; - const char *desc; - uint16_t device_id; - uint8_t revision; - uint16_t subsystem_vendor_id; - uint16_t subsystem_id; - - uint32_t device; - uint8_t stats_size; - bool has_extended_tcb_support; - bool power_management; -} E100PCIDeviceInfo; - -/* Offsets to the various registers. - All accesses need not be longword aligned. */ -typedef enum { - SCBStatus = 0, /* Status Word. */ - SCBAck = 1, - SCBCmd = 2, /* Rx/Command Unit command and status. */ - SCBIntmask = 3, - SCBPointer = 4, /* General purpose pointer. */ - SCBPort = 8, /* Misc. commands and operands. */ - SCBflash = 12, /* Flash memory control. */ - SCBeeprom = 14, /* EEPROM control. */ - SCBCtrlMDI = 16, /* MDI interface control. */ - SCBEarlyRx = 20, /* Early receive byte count. */ - SCBFlow = 24, /* Flow Control. */ - SCBpmdr = 27, /* Power Management Driver. */ - SCBgctrl = 28, /* General Control. */ - SCBgstat = 29, /* General Status. */ -} E100RegisterOffset; - -/* A speedo3 transmit buffer descriptor with two buffers... */ -typedef struct { - uint16_t status; - uint16_t command; - uint32_t link; /* void * */ - uint32_t tbd_array_addr; /* transmit buffer descriptor array address. */ - uint16_t tcb_bytes; /* transmit command block byte count (in lower 14 bits */ - uint8_t tx_threshold; /* transmit threshold */ - uint8_t tbd_count; /* TBD number */ -#if 0 - /* This constitutes two "TBD" entries: hdr and data */ - uint32_t tx_buf_addr0; /* void *, header of frame to be transmitted. */ - int32_t tx_buf_size0; /* Length of Tx hdr. */ - uint32_t tx_buf_addr1; /* void *, data to be transmitted. */ - int32_t tx_buf_size1; /* Length of Tx data. */ -#endif -} eepro100_tx_t; - -/* Receive frame descriptor. */ -typedef struct { - int16_t status; - uint16_t command; - uint32_t link; /* struct RxFD * */ - uint32_t rx_buf_addr; /* void * */ - uint16_t count; - uint16_t size; - /* Ethernet frame data follows. */ -} eepro100_rx_t; - -typedef enum { - COMMAND_EL = BIT(15), - COMMAND_S = BIT(14), - COMMAND_I = BIT(13), - COMMAND_NC = BIT(4), - COMMAND_SF = BIT(3), - COMMAND_CMD = BITS(2, 0), -} scb_command_bit; - -typedef enum { - STATUS_C = BIT(15), - STATUS_OK = BIT(13), -} scb_status_bit; - -typedef struct { - uint32_t tx_good_frames, tx_max_collisions, tx_late_collisions, - tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions, - tx_multiple_collisions, tx_total_collisions; - uint32_t rx_good_frames, rx_crc_errors, rx_alignment_errors, - rx_resource_errors, rx_overrun_errors, rx_cdt_errors, - rx_short_frame_errors; - uint32_t fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported; - uint16_t xmt_tco_frames, rcv_tco_frames; - /* TODO: i82559 has six reserved statistics but a total of 24 dwords. */ - uint32_t reserved[4]; -} eepro100_stats_t; - -typedef enum { - cu_idle = 0, - cu_suspended = 1, - cu_active = 2, - cu_lpq_active = 2, - cu_hqp_active = 3 -} cu_state_t; - -typedef enum { - ru_idle = 0, - ru_suspended = 1, - ru_no_resources = 2, - ru_ready = 4 -} ru_state_t; - -typedef struct { - PCIDevice dev; - /* Hash register (multicast mask array, multiple individual addresses). */ - uint8_t mult[8]; - MemoryRegion mmio_bar; - MemoryRegion io_bar; - MemoryRegion flash_bar; - NICState *nic; - NICConf conf; - uint8_t scb_stat; /* SCB stat/ack byte */ - uint8_t int_stat; /* PCI interrupt status */ - /* region must not be saved by nic_save. */ - uint16_t mdimem[32]; - eeprom_t *eeprom; - uint32_t device; /* device variant */ - /* (cu_base + cu_offset) address the next command block in the command block list. */ - uint32_t cu_base; /* CU base address */ - uint32_t cu_offset; /* CU address offset */ - /* (ru_base + ru_offset) address the RFD in the Receive Frame Area. */ - uint32_t ru_base; /* RU base address */ - uint32_t ru_offset; /* RU address offset */ - uint32_t statsaddr; /* pointer to eepro100_stats_t */ - - /* Temporary status information (no need to save these values), - * used while processing CU commands. */ - eepro100_tx_t tx; /* transmit buffer descriptor */ - uint32_t cb_address; /* = cu_base + cu_offset */ - - /* Statistical counters. Also used for wake-up packet (i82559). */ - eepro100_stats_t statistics; - - /* Data in mem is always in the byte order of the controller (le). - * It must be dword aligned to allow direct access to 32 bit values. */ - uint8_t mem[PCI_MEM_SIZE] __attribute__((aligned(8))); - - /* Configuration bytes. */ - uint8_t configuration[22]; - - /* vmstate for each particular nic */ - VMStateDescription *vmstate; - - /* Quasi static device properties (no need to save them). */ - uint16_t stats_size; - bool has_extended_tcb_support; -} EEPRO100State; - -/* Word indices in EEPROM. */ -typedef enum { - EEPROM_CNFG_MDIX = 0x03, - EEPROM_ID = 0x05, - EEPROM_PHY_ID = 0x06, - EEPROM_VENDOR_ID = 0x0c, - EEPROM_CONFIG_ASF = 0x0d, - EEPROM_DEVICE_ID = 0x23, - EEPROM_SMBUS_ADDR = 0x90, -} EEPROMOffset; - -/* Bit values for EEPROM ID word. */ -typedef enum { - EEPROM_ID_MDM = BIT(0), /* Modem */ - EEPROM_ID_STB = BIT(1), /* Standby Enable */ - EEPROM_ID_WMR = BIT(2), /* ??? */ - EEPROM_ID_WOL = BIT(5), /* Wake on LAN */ - EEPROM_ID_DPD = BIT(6), /* Deep Power Down */ - EEPROM_ID_ALT = BIT(7), /* */ - /* BITS(10, 8) device revision */ - EEPROM_ID_BD = BIT(11), /* boot disable */ - EEPROM_ID_ID = BIT(13), /* id bit */ - /* BITS(15, 14) signature */ - EEPROM_ID_VALID = BIT(14), /* signature for valid eeprom */ -} eeprom_id_bit; - -/* Default values for MDI (PHY) registers */ -static const uint16_t eepro100_mdi_default[] = { - /* MDI Registers 0 - 6, 7 */ - 0x3000, 0x780d, 0x02a8, 0x0154, 0x05e1, 0x0000, 0x0000, 0x0000, - /* MDI Registers 8 - 15 */ - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - /* MDI Registers 16 - 31 */ - 0x0003, 0x0000, 0x0001, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -}; - -/* Readonly mask for MDI (PHY) registers */ -static const uint16_t eepro100_mdi_mask[] = { - 0x0000, 0xffff, 0xffff, 0xffff, 0xc01f, 0xffff, 0xffff, 0x0000, - 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - 0x0fff, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, - 0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, -}; - -#define POLYNOMIAL 0x04c11db6 - -static E100PCIDeviceInfo *eepro100_get_class(EEPRO100State *s); - -/* From FreeBSD (locally modified). */ -static unsigned e100_compute_mcast_idx(const uint8_t *ep) -{ - uint32_t crc; - int carry, i, j; - uint8_t b; - - crc = 0xffffffff; - for (i = 0; i < 6; i++) { - b = *ep++; - for (j = 0; j < 8; j++) { - carry = ((crc & 0x80000000L) ? 1 : 0) ^ (b & 0x01); - crc <<= 1; - b >>= 1; - if (carry) { - crc = ((crc ^ POLYNOMIAL) | carry); - } - } - } - return (crc & BITS(7, 2)) >> 2; -} - -/* Read a 16 bit control/status (CSR) register. */ -static uint16_t e100_read_reg2(EEPRO100State *s, E100RegisterOffset addr) -{ - assert(!((uintptr_t)&s->mem[addr] & 1)); - return le16_to_cpup((uint16_t *)&s->mem[addr]); -} - -/* Read a 32 bit control/status (CSR) register. */ -static uint32_t e100_read_reg4(EEPRO100State *s, E100RegisterOffset addr) -{ - assert(!((uintptr_t)&s->mem[addr] & 3)); - return le32_to_cpup((uint32_t *)&s->mem[addr]); -} - -/* Write a 16 bit control/status (CSR) register. */ -static void e100_write_reg2(EEPRO100State *s, E100RegisterOffset addr, - uint16_t val) -{ - assert(!((uintptr_t)&s->mem[addr] & 1)); - cpu_to_le16w((uint16_t *)&s->mem[addr], val); -} - -/* Read a 32 bit control/status (CSR) register. */ -static void e100_write_reg4(EEPRO100State *s, E100RegisterOffset addr, - uint32_t val) -{ - assert(!((uintptr_t)&s->mem[addr] & 3)); - cpu_to_le32w((uint32_t *)&s->mem[addr], val); -} - -#if defined(DEBUG_EEPRO100) -static const char *nic_dump(const uint8_t * buf, unsigned size) -{ - static char dump[3 * 16 + 1]; - char *p = &dump[0]; - if (size > 16) { - size = 16; - } - while (size-- > 0) { - p += sprintf(p, " %02x", *buf++); - } - return dump; -} -#endif /* DEBUG_EEPRO100 */ - -enum scb_stat_ack { - stat_ack_not_ours = 0x00, - stat_ack_sw_gen = 0x04, - stat_ack_rnr = 0x10, - stat_ack_cu_idle = 0x20, - stat_ack_frame_rx = 0x40, - stat_ack_cu_cmd_done = 0x80, - stat_ack_not_present = 0xFF, - stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx), - stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done), -}; - -static void disable_interrupt(EEPRO100State * s) -{ - if (s->int_stat) { - TRACE(INT, logout("interrupt disabled\n")); - pci_irq_deassert(&s->dev); - s->int_stat = 0; - } -} - -static void enable_interrupt(EEPRO100State * s) -{ - if (!s->int_stat) { - TRACE(INT, logout("interrupt enabled\n")); - pci_irq_assert(&s->dev); - s->int_stat = 1; - } -} - -static void eepro100_acknowledge(EEPRO100State * s) -{ - s->scb_stat &= ~s->mem[SCBAck]; - s->mem[SCBAck] = s->scb_stat; - if (s->scb_stat == 0) { - disable_interrupt(s); - } -} - -static void eepro100_interrupt(EEPRO100State * s, uint8_t status) -{ - uint8_t mask = ~s->mem[SCBIntmask]; - s->mem[SCBAck] |= status; - status = s->scb_stat = s->mem[SCBAck]; - status &= (mask | 0x0f); -#if 0 - status &= (~s->mem[SCBIntmask] | 0x0xf); -#endif - if (status && (mask & 0x01)) { - /* SCB mask and SCB Bit M do not disable interrupt. */ - enable_interrupt(s); - } else if (s->int_stat) { - disable_interrupt(s); - } -} - -static void eepro100_cx_interrupt(EEPRO100State * s) -{ - /* CU completed action command. */ - /* Transmit not ok (82557 only, not in emulation). */ - eepro100_interrupt(s, 0x80); -} - -static void eepro100_cna_interrupt(EEPRO100State * s) -{ - /* CU left the active state. */ - eepro100_interrupt(s, 0x20); -} - -static void eepro100_fr_interrupt(EEPRO100State * s) -{ - /* RU received a complete frame. */ - eepro100_interrupt(s, 0x40); -} - -static void eepro100_rnr_interrupt(EEPRO100State * s) -{ - /* RU is not ready. */ - eepro100_interrupt(s, 0x10); -} - -static void eepro100_mdi_interrupt(EEPRO100State * s) -{ - /* MDI completed read or write cycle. */ - eepro100_interrupt(s, 0x08); -} - -static void eepro100_swi_interrupt(EEPRO100State * s) -{ - /* Software has requested an interrupt. */ - eepro100_interrupt(s, 0x04); -} - -#if 0 -static void eepro100_fcp_interrupt(EEPRO100State * s) -{ - /* Flow control pause interrupt (82558 and later). */ - eepro100_interrupt(s, 0x01); -} -#endif - -static void e100_pci_reset(EEPRO100State * s) -{ - E100PCIDeviceInfo *info = eepro100_get_class(s); - uint32_t device = s->device; - uint8_t *pci_conf = s->dev.config; - - TRACE(OTHER, logout("%p\n", s)); - - /* PCI Status */ - pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM | - PCI_STATUS_FAST_BACK); - /* PCI Latency Timer */ - pci_set_byte(pci_conf + PCI_LATENCY_TIMER, 0x20); /* latency timer = 32 clocks */ - /* Capability Pointer is set by PCI framework. */ - /* Interrupt Line */ - /* Interrupt Pin */ - pci_set_byte(pci_conf + PCI_INTERRUPT_PIN, 1); /* interrupt pin A */ - /* Minimum Grant */ - pci_set_byte(pci_conf + PCI_MIN_GNT, 0x08); - /* Maximum Latency */ - pci_set_byte(pci_conf + PCI_MAX_LAT, 0x18); - - s->stats_size = info->stats_size; - s->has_extended_tcb_support = info->has_extended_tcb_support; - - switch (device) { - case i82550: - case i82551: - case i82557A: - case i82557B: - case i82557C: - case i82558A: - case i82558B: - case i82559A: - case i82559B: - case i82559ER: - case i82562: - case i82801: - case i82559C: - break; - default: - logout("Device %X is undefined!\n", device); - } - - /* Standard TxCB. */ - s->configuration[6] |= BIT(4); - - /* Standard statistical counters. */ - s->configuration[6] |= BIT(5); - - if (s->stats_size == 80) { - /* TODO: check TCO Statistical Counters bit. Documentation not clear. */ - if (s->configuration[6] & BIT(2)) { - /* TCO statistical counters. */ - assert(s->configuration[6] & BIT(5)); - } else { - if (s->configuration[6] & BIT(5)) { - /* No extended statistical counters, i82557 compatible. */ - s->stats_size = 64; - } else { - /* i82558 compatible. */ - s->stats_size = 76; - } - } - } else { - if (s->configuration[6] & BIT(5)) { - /* No extended statistical counters. */ - s->stats_size = 64; - } - } - assert(s->stats_size > 0 && s->stats_size <= sizeof(s->statistics)); - - if (info->power_management) { - /* Power Management Capabilities */ - int cfg_offset = 0xdc; - int r = pci_add_capability(&s->dev, PCI_CAP_ID_PM, - cfg_offset, PCI_PM_SIZEOF); - assert(r >= 0); - pci_set_word(pci_conf + cfg_offset + PCI_PM_PMC, 0x7e21); -#if 0 /* TODO: replace dummy code for power management emulation. */ - /* TODO: Power Management Control / Status. */ - pci_set_word(pci_conf + cfg_offset + PCI_PM_CTRL, 0x0000); - /* TODO: Ethernet Power Consumption Registers (i82559 and later). */ - pci_set_byte(pci_conf + cfg_offset + PCI_PM_PPB_EXTENSIONS, 0x0000); -#endif - } - -#if EEPROM_SIZE > 0 - if (device == i82557C || device == i82558B || device == i82559C) { - /* - TODO: get vendor id from EEPROM for i82557C or later. - TODO: get device id from EEPROM for i82557C or later. - TODO: status bit 4 can be disabled by EEPROM for i82558, i82559. - TODO: header type is determined by EEPROM for i82559. - TODO: get subsystem id from EEPROM for i82557C or later. - TODO: get subsystem vendor id from EEPROM for i82557C or later. - TODO: exp. rom baddr depends on a bit in EEPROM for i82558 or later. - TODO: capability pointer depends on EEPROM for i82558. - */ - logout("Get device id and revision from EEPROM!!!\n"); - } -#endif /* EEPROM_SIZE > 0 */ -} - -static void nic_selective_reset(EEPRO100State * s) -{ - size_t i; - uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom); -#if 0 - eeprom93xx_reset(s->eeprom); -#endif - memcpy(eeprom_contents, s->conf.macaddr.a, 6); - eeprom_contents[EEPROM_ID] = EEPROM_ID_VALID; - if (s->device == i82557B || s->device == i82557C) - eeprom_contents[5] = 0x0100; - eeprom_contents[EEPROM_PHY_ID] = 1; - uint16_t sum = 0; - for (i = 0; i < EEPROM_SIZE - 1; i++) { - sum += eeprom_contents[i]; - } - eeprom_contents[EEPROM_SIZE - 1] = 0xbaba - sum; - TRACE(EEPROM, logout("checksum=0x%04x\n", eeprom_contents[EEPROM_SIZE - 1])); - - memset(s->mem, 0, sizeof(s->mem)); - e100_write_reg4(s, SCBCtrlMDI, BIT(21)); - - assert(sizeof(s->mdimem) == sizeof(eepro100_mdi_default)); - memcpy(&s->mdimem[0], &eepro100_mdi_default[0], sizeof(s->mdimem)); -} - -static void nic_reset(void *opaque) -{ - EEPRO100State *s = opaque; - TRACE(OTHER, logout("%p\n", s)); - /* TODO: Clearing of hash register for selective reset, too? */ - memset(&s->mult[0], 0, sizeof(s->mult)); - nic_selective_reset(s); -} - -#if defined(DEBUG_EEPRO100) -static const char * const e100_reg[PCI_IO_SIZE / 4] = { - "Command/Status", - "General Pointer", - "Port", - "EEPROM/Flash Control", - "MDI Control", - "Receive DMA Byte Count", - "Flow Control", - "General Status/Control" -}; - -static char *regname(uint32_t addr) -{ - static char buf[32]; - if (addr < PCI_IO_SIZE) { - const char *r = e100_reg[addr / 4]; - if (r != 0) { - snprintf(buf, sizeof(buf), "%s+%u", r, addr % 4); - } else { - snprintf(buf, sizeof(buf), "0x%02x", addr); - } - } else { - snprintf(buf, sizeof(buf), "??? 0x%08x", addr); - } - return buf; -} -#endif /* DEBUG_EEPRO100 */ - -/***************************************************************************** - * - * Command emulation. - * - ****************************************************************************/ - -#if 0 -static uint16_t eepro100_read_command(EEPRO100State * s) -{ - uint16_t val = 0xffff; - TRACE(OTHER, logout("val=0x%04x\n", val)); - return val; -} -#endif - -/* Commands that can be put in a command list entry. */ -enum commands { - CmdNOp = 0, - CmdIASetup = 1, - CmdConfigure = 2, - CmdMulticastList = 3, - CmdTx = 4, - CmdTDR = 5, /* load microcode */ - CmdDump = 6, - CmdDiagnose = 7, - - /* And some extra flags: */ - CmdSuspend = 0x4000, /* Suspend after completion. */ - CmdIntr = 0x2000, /* Interrupt after completion. */ - CmdTxFlex = 0x0008, /* Use "Flexible mode" for CmdTx command. */ -}; - -static cu_state_t get_cu_state(EEPRO100State * s) -{ - return ((s->mem[SCBStatus] & BITS(7, 6)) >> 6); -} - -static void set_cu_state(EEPRO100State * s, cu_state_t state) -{ - s->mem[SCBStatus] = (s->mem[SCBStatus] & ~BITS(7, 6)) + (state << 6); -} - -static ru_state_t get_ru_state(EEPRO100State * s) -{ - return ((s->mem[SCBStatus] & BITS(5, 2)) >> 2); -} - -static void set_ru_state(EEPRO100State * s, ru_state_t state) -{ - s->mem[SCBStatus] = (s->mem[SCBStatus] & ~BITS(5, 2)) + (state << 2); -} - -static void dump_statistics(EEPRO100State * s) -{ - /* Dump statistical data. Most data is never changed by the emulation - * and always 0, so we first just copy the whole block and then those - * values which really matter. - * Number of data should check configuration!!! - */ - pci_dma_write(&s->dev, s->statsaddr, &s->statistics, s->stats_size); - stl_le_pci_dma(&s->dev, s->statsaddr + 0, - s->statistics.tx_good_frames); - stl_le_pci_dma(&s->dev, s->statsaddr + 36, - s->statistics.rx_good_frames); - stl_le_pci_dma(&s->dev, s->statsaddr + 48, - s->statistics.rx_resource_errors); - stl_le_pci_dma(&s->dev, s->statsaddr + 60, - s->statistics.rx_short_frame_errors); -#if 0 - stw_le_pci_dma(&s->dev, s->statsaddr + 76, s->statistics.xmt_tco_frames); - stw_le_pci_dma(&s->dev, s->statsaddr + 78, s->statistics.rcv_tco_frames); - missing("CU dump statistical counters"); -#endif -} - -static void read_cb(EEPRO100State *s) -{ - pci_dma_read(&s->dev, s->cb_address, &s->tx, sizeof(s->tx)); - s->tx.status = le16_to_cpu(s->tx.status); - s->tx.command = le16_to_cpu(s->tx.command); - s->tx.link = le32_to_cpu(s->tx.link); - s->tx.tbd_array_addr = le32_to_cpu(s->tx.tbd_array_addr); - s->tx.tcb_bytes = le16_to_cpu(s->tx.tcb_bytes); -} - -static void tx_command(EEPRO100State *s) -{ - uint32_t tbd_array = le32_to_cpu(s->tx.tbd_array_addr); - uint16_t tcb_bytes = (le16_to_cpu(s->tx.tcb_bytes) & 0x3fff); - /* Sends larger than MAX_ETH_FRAME_SIZE are allowed, up to 2600 bytes. */ - uint8_t buf[2600]; - uint16_t size = 0; - uint32_t tbd_address = s->cb_address + 0x10; - TRACE(RXTX, logout - ("transmit, TBD array address 0x%08x, TCB byte count 0x%04x, TBD count %u\n", - tbd_array, tcb_bytes, s->tx.tbd_count)); - - if (tcb_bytes > 2600) { - logout("TCB byte count too large, using 2600\n"); - tcb_bytes = 2600; - } - if (!((tcb_bytes > 0) || (tbd_array != 0xffffffff))) { - logout - ("illegal values of TBD array address and TCB byte count!\n"); - } - assert(tcb_bytes <= sizeof(buf)); - while (size < tcb_bytes) { - uint32_t tx_buffer_address = ldl_le_pci_dma(&s->dev, tbd_address); - uint16_t tx_buffer_size = lduw_le_pci_dma(&s->dev, tbd_address + 4); -#if 0 - uint16_t tx_buffer_el = lduw_le_pci_dma(&s->dev, tbd_address + 6); -#endif - if (tx_buffer_size == 0) { - /* Prevent an endless loop. */ - logout("loop in %s:%u\n", __FILE__, __LINE__); - break; - } - tbd_address += 8; - TRACE(RXTX, logout - ("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n", - tx_buffer_address, tx_buffer_size)); - tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size); - pci_dma_read(&s->dev, tx_buffer_address, &buf[size], tx_buffer_size); - size += tx_buffer_size; - } - if (tbd_array == 0xffffffff) { - /* Simplified mode. Was already handled by code above. */ - } else { - /* Flexible mode. */ - uint8_t tbd_count = 0; - if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) { - /* Extended Flexible TCB. */ - for (; tbd_count < 2; tbd_count++) { - uint32_t tx_buffer_address = ldl_le_pci_dma(&s->dev, - tbd_address); - uint16_t tx_buffer_size = lduw_le_pci_dma(&s->dev, - tbd_address + 4); - uint16_t tx_buffer_el = lduw_le_pci_dma(&s->dev, - tbd_address + 6); - tbd_address += 8; - TRACE(RXTX, logout - ("TBD (extended flexible mode): buffer address 0x%08x, size 0x%04x\n", - tx_buffer_address, tx_buffer_size)); - tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size); - pci_dma_read(&s->dev, tx_buffer_address, - &buf[size], tx_buffer_size); - size += tx_buffer_size; - if (tx_buffer_el & 1) { - break; - } - } - } - tbd_address = tbd_array; - for (; tbd_count < s->tx.tbd_count; tbd_count++) { - uint32_t tx_buffer_address = ldl_le_pci_dma(&s->dev, tbd_address); - uint16_t tx_buffer_size = lduw_le_pci_dma(&s->dev, tbd_address + 4); - uint16_t tx_buffer_el = lduw_le_pci_dma(&s->dev, tbd_address + 6); - tbd_address += 8; - TRACE(RXTX, logout - ("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n", - tx_buffer_address, tx_buffer_size)); - tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size); - pci_dma_read(&s->dev, tx_buffer_address, - &buf[size], tx_buffer_size); - size += tx_buffer_size; - if (tx_buffer_el & 1) { - break; - } - } - } - TRACE(RXTX, logout("%p sending frame, len=%d,%s\n", s, size, nic_dump(buf, size))); - qemu_send_packet(qemu_get_queue(s->nic), buf, size); - s->statistics.tx_good_frames++; - /* Transmit with bad status would raise an CX/TNO interrupt. - * (82557 only). Emulation never has bad status. */ -#if 0 - eepro100_cx_interrupt(s); -#endif -} - -static void set_multicast_list(EEPRO100State *s) -{ - uint16_t multicast_count = s->tx.tbd_array_addr & BITS(13, 0); - uint16_t i; - memset(&s->mult[0], 0, sizeof(s->mult)); - TRACE(OTHER, logout("multicast list, multicast count = %u\n", multicast_count)); - for (i = 0; i < multicast_count; i += 6) { - uint8_t multicast_addr[6]; - pci_dma_read(&s->dev, s->cb_address + 10 + i, multicast_addr, 6); - TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr, 6))); - unsigned mcast_idx = e100_compute_mcast_idx(multicast_addr); - assert(mcast_idx < 64); - s->mult[mcast_idx >> 3] |= (1 << (mcast_idx & 7)); - } -} - -static void action_command(EEPRO100State *s) -{ - /* The loop below won't stop if it gets special handcrafted data. - Therefore we limit the number of iterations. */ - unsigned max_loop_count = 16; - - for (;;) { - bool bit_el; - bool bit_s; - bool bit_i; - bool bit_nc; - uint16_t ok_status = STATUS_OK; - s->cb_address = s->cu_base + s->cu_offset; - read_cb(s); - bit_el = ((s->tx.command & COMMAND_EL) != 0); - bit_s = ((s->tx.command & COMMAND_S) != 0); - bit_i = ((s->tx.command & COMMAND_I) != 0); - bit_nc = ((s->tx.command & COMMAND_NC) != 0); -#if 0 - bool bit_sf = ((s->tx.command & COMMAND_SF) != 0); -#endif - - if (max_loop_count-- == 0) { - /* Prevent an endless loop. */ - logout("loop in %s:%u\n", __FILE__, __LINE__); - break; - } - - s->cu_offset = s->tx.link; - TRACE(OTHER, - logout("val=(cu start), status=0x%04x, command=0x%04x, link=0x%08x\n", - s->tx.status, s->tx.command, s->tx.link)); - switch (s->tx.command & COMMAND_CMD) { - case CmdNOp: - /* Do nothing. */ - break; - case CmdIASetup: - pci_dma_read(&s->dev, s->cb_address + 8, &s->conf.macaddr.a[0], 6); - TRACE(OTHER, logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6))); - break; - case CmdConfigure: - pci_dma_read(&s->dev, s->cb_address + 8, - &s->configuration[0], sizeof(s->configuration)); - TRACE(OTHER, logout("configuration: %s\n", - nic_dump(&s->configuration[0], 16))); - TRACE(OTHER, logout("configuration: %s\n", - nic_dump(&s->configuration[16], - ARRAY_SIZE(s->configuration) - 16))); - if (s->configuration[20] & BIT(6)) { - TRACE(OTHER, logout("Multiple IA bit\n")); - } - break; - case CmdMulticastList: - set_multicast_list(s); - break; - case CmdTx: - if (bit_nc) { - missing("CmdTx: NC = 0"); - ok_status = 0; - break; - } - tx_command(s); - break; - case CmdTDR: - TRACE(OTHER, logout("load microcode\n")); - /* Starting with offset 8, the command contains - * 64 dwords microcode which we just ignore here. */ - break; - case CmdDiagnose: - TRACE(OTHER, logout("diagnose\n")); - /* Make sure error flag is not set. */ - s->tx.status = 0; - break; - default: - missing("undefined command"); - ok_status = 0; - break; - } - /* Write new status. */ - stw_le_pci_dma(&s->dev, s->cb_address, - s->tx.status | ok_status | STATUS_C); - if (bit_i) { - /* CU completed action. */ - eepro100_cx_interrupt(s); - } - if (bit_el) { - /* CU becomes idle. Terminate command loop. */ - set_cu_state(s, cu_idle); - eepro100_cna_interrupt(s); - break; - } else if (bit_s) { - /* CU becomes suspended. Terminate command loop. */ - set_cu_state(s, cu_suspended); - eepro100_cna_interrupt(s); - break; - } else { - /* More entries in list. */ - TRACE(OTHER, logout("CU list with at least one more entry\n")); - } - } - TRACE(OTHER, logout("CU list empty\n")); - /* List is empty. Now CU is idle or suspended. */ -} - -static void eepro100_cu_command(EEPRO100State * s, uint8_t val) -{ - cu_state_t cu_state; - switch (val) { - case CU_NOP: - /* No operation. */ - break; - case CU_START: - cu_state = get_cu_state(s); - if (cu_state != cu_idle && cu_state != cu_suspended) { - /* Intel documentation says that CU must be idle or suspended - * for the CU start command. */ - logout("unexpected CU state is %u\n", cu_state); - } - set_cu_state(s, cu_active); - s->cu_offset = e100_read_reg4(s, SCBPointer); - action_command(s); - break; - case CU_RESUME: - if (get_cu_state(s) != cu_suspended) { - logout("bad CU resume from CU state %u\n", get_cu_state(s)); - /* Workaround for bad Linux eepro100 driver which resumes - * from idle state. */ -#if 0 - missing("cu resume"); -#endif - set_cu_state(s, cu_suspended); - } - if (get_cu_state(s) == cu_suspended) { - TRACE(OTHER, logout("CU resuming\n")); - set_cu_state(s, cu_active); - action_command(s); - } - break; - case CU_STATSADDR: - /* Load dump counters address. */ - s->statsaddr = e100_read_reg4(s, SCBPointer); - TRACE(OTHER, logout("val=0x%02x (dump counters address)\n", val)); - if (s->statsaddr & 3) { - /* Memory must be Dword aligned. */ - logout("unaligned dump counters address\n"); - /* Handling of misaligned addresses is undefined. - * Here we align the address by ignoring the lower bits. */ - /* TODO: Test unaligned dump counter address on real hardware. */ - s->statsaddr &= ~3; - } - break; - case CU_SHOWSTATS: - /* Dump statistical counters. */ - TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val)); - dump_statistics(s); - stl_le_pci_dma(&s->dev, s->statsaddr + s->stats_size, 0xa005); - break; - case CU_CMD_BASE: - /* Load CU base. */ - TRACE(OTHER, logout("val=0x%02x (CU base address)\n", val)); - s->cu_base = e100_read_reg4(s, SCBPointer); - break; - case CU_DUMPSTATS: - /* Dump and reset statistical counters. */ - TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val)); - dump_statistics(s); - stl_le_pci_dma(&s->dev, s->statsaddr + s->stats_size, 0xa007); - memset(&s->statistics, 0, sizeof(s->statistics)); - break; - case CU_SRESUME: - /* CU static resume. */ - missing("CU static resume"); - break; - default: - missing("Undefined CU command"); - } -} - -static void eepro100_ru_command(EEPRO100State * s, uint8_t val) -{ - switch (val) { - case RU_NOP: - /* No operation. */ - break; - case RX_START: - /* RU start. */ - if (get_ru_state(s) != ru_idle) { - logout("RU state is %u, should be %u\n", get_ru_state(s), ru_idle); -#if 0 - assert(!"wrong RU state"); -#endif - } - set_ru_state(s, ru_ready); - s->ru_offset = e100_read_reg4(s, SCBPointer); - qemu_flush_queued_packets(qemu_get_queue(s->nic)); - TRACE(OTHER, logout("val=0x%02x (rx start)\n", val)); - break; - case RX_RESUME: - /* Restart RU. */ - if (get_ru_state(s) != ru_suspended) { - logout("RU state is %u, should be %u\n", get_ru_state(s), - ru_suspended); -#if 0 - assert(!"wrong RU state"); -#endif - } - set_ru_state(s, ru_ready); - break; - case RU_ABORT: - /* RU abort. */ - if (get_ru_state(s) == ru_ready) { - eepro100_rnr_interrupt(s); - } - set_ru_state(s, ru_idle); - break; - case RX_ADDR_LOAD: - /* Load RU base. */ - TRACE(OTHER, logout("val=0x%02x (RU base address)\n", val)); - s->ru_base = e100_read_reg4(s, SCBPointer); - break; - default: - logout("val=0x%02x (undefined RU command)\n", val); - missing("Undefined SU command"); - } -} - -static void eepro100_write_command(EEPRO100State * s, uint8_t val) -{ - eepro100_ru_command(s, val & 0x0f); - eepro100_cu_command(s, val & 0xf0); - if ((val) == 0) { - TRACE(OTHER, logout("val=0x%02x\n", val)); - } - /* Clear command byte after command was accepted. */ - s->mem[SCBCmd] = 0; -} - -/***************************************************************************** - * - * EEPROM emulation. - * - ****************************************************************************/ - -#define EEPROM_CS 0x02 -#define EEPROM_SK 0x01 -#define EEPROM_DI 0x04 -#define EEPROM_DO 0x08 - -static uint16_t eepro100_read_eeprom(EEPRO100State * s) -{ - uint16_t val = e100_read_reg2(s, SCBeeprom); - if (eeprom93xx_read(s->eeprom)) { - val |= EEPROM_DO; - } else { - val &= ~EEPROM_DO; - } - TRACE(EEPROM, logout("val=0x%04x\n", val)); - return val; -} - -static void eepro100_write_eeprom(eeprom_t * eeprom, uint8_t val) -{ - TRACE(EEPROM, logout("val=0x%02x\n", val)); - - /* mask unwritable bits */ -#if 0 - val = SET_MASKED(val, 0x31, eeprom->value); -#endif - - int eecs = ((val & EEPROM_CS) != 0); - int eesk = ((val & EEPROM_SK) != 0); - int eedi = ((val & EEPROM_DI) != 0); - eeprom93xx_write(eeprom, eecs, eesk, eedi); -} - -/***************************************************************************** - * - * MDI emulation. - * - ****************************************************************************/ - -#if defined(DEBUG_EEPRO100) -static const char * const mdi_op_name[] = { - "opcode 0", - "write", - "read", - "opcode 3" -}; - -static const char * const mdi_reg_name[] = { - "Control", - "Status", - "PHY Identification (Word 1)", - "PHY Identification (Word 2)", - "Auto-Negotiation Advertisement", - "Auto-Negotiation Link Partner Ability", - "Auto-Negotiation Expansion" -}; - -static const char *reg2name(uint8_t reg) -{ - static char buffer[10]; - const char *p = buffer; - if (reg < ARRAY_SIZE(mdi_reg_name)) { - p = mdi_reg_name[reg]; - } else { - snprintf(buffer, sizeof(buffer), "reg=0x%02x", reg); - } - return p; -} -#endif /* DEBUG_EEPRO100 */ - -static uint32_t eepro100_read_mdi(EEPRO100State * s) -{ - uint32_t val = e100_read_reg4(s, SCBCtrlMDI); - -#ifdef DEBUG_EEPRO100 - uint8_t raiseint = (val & BIT(29)) >> 29; - uint8_t opcode = (val & BITS(27, 26)) >> 26; - uint8_t phy = (val & BITS(25, 21)) >> 21; - uint8_t reg = (val & BITS(20, 16)) >> 16; - uint16_t data = (val & BITS(15, 0)); -#endif - /* Emulation takes no time to finish MDI transaction. */ - val |= BIT(28); - TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n", - val, raiseint, mdi_op_name[opcode], phy, - reg2name(reg), data)); - return val; -} - -static void eepro100_write_mdi(EEPRO100State *s) -{ - uint32_t val = e100_read_reg4(s, SCBCtrlMDI); - uint8_t raiseint = (val & BIT(29)) >> 29; - uint8_t opcode = (val & BITS(27, 26)) >> 26; - uint8_t phy = (val & BITS(25, 21)) >> 21; - uint8_t reg = (val & BITS(20, 16)) >> 16; - uint16_t data = (val & BITS(15, 0)); - TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n", - val, raiseint, mdi_op_name[opcode], phy, reg2name(reg), data)); - if (phy != 1) { - /* Unsupported PHY address. */ -#if 0 - logout("phy must be 1 but is %u\n", phy); -#endif - data = 0; - } else if (opcode != 1 && opcode != 2) { - /* Unsupported opcode. */ - logout("opcode must be 1 or 2 but is %u\n", opcode); - data = 0; - } else if (reg > 6) { - /* Unsupported register. */ - logout("register must be 0...6 but is %u\n", reg); - data = 0; - } else { - TRACE(MDI, logout("val=0x%08x (int=%u, %s, phy=%u, %s, data=0x%04x\n", - val, raiseint, mdi_op_name[opcode], phy, - reg2name(reg), data)); - if (opcode == 1) { - /* MDI write */ - switch (reg) { - case 0: /* Control Register */ - if (data & 0x8000) { - /* Reset status and control registers to default. */ - s->mdimem[0] = eepro100_mdi_default[0]; - s->mdimem[1] = eepro100_mdi_default[1]; - data = s->mdimem[reg]; - } else { - /* Restart Auto Configuration = Normal Operation */ - data &= ~0x0200; - } - break; - case 1: /* Status Register */ - missing("not writable"); - break; - case 2: /* PHY Identification Register (Word 1) */ - case 3: /* PHY Identification Register (Word 2) */ - missing("not implemented"); - break; - case 4: /* Auto-Negotiation Advertisement Register */ - case 5: /* Auto-Negotiation Link Partner Ability Register */ - break; - case 6: /* Auto-Negotiation Expansion Register */ - default: - missing("not implemented"); - } - s->mdimem[reg] &= eepro100_mdi_mask[reg]; - s->mdimem[reg] |= data & ~eepro100_mdi_mask[reg]; - } else if (opcode == 2) { - /* MDI read */ - switch (reg) { - case 0: /* Control Register */ - if (data & 0x8000) { - /* Reset status and control registers to default. */ - s->mdimem[0] = eepro100_mdi_default[0]; - s->mdimem[1] = eepro100_mdi_default[1]; - } - break; - case 1: /* Status Register */ - s->mdimem[reg] |= 0x0020; - break; - case 2: /* PHY Identification Register (Word 1) */ - case 3: /* PHY Identification Register (Word 2) */ - case 4: /* Auto-Negotiation Advertisement Register */ - break; - case 5: /* Auto-Negotiation Link Partner Ability Register */ - s->mdimem[reg] = 0x41fe; - break; - case 6: /* Auto-Negotiation Expansion Register */ - s->mdimem[reg] = 0x0001; - break; - } - data = s->mdimem[reg]; - } - /* Emulation takes no time to finish MDI transaction. - * Set MDI bit in SCB status register. */ - s->mem[SCBAck] |= 0x08; - val |= BIT(28); - if (raiseint) { - eepro100_mdi_interrupt(s); - } - } - val = (val & 0xffff0000) + data; - e100_write_reg4(s, SCBCtrlMDI, val); -} - -/***************************************************************************** - * - * Port emulation. - * - ****************************************************************************/ - -#define PORT_SOFTWARE_RESET 0 -#define PORT_SELFTEST 1 -#define PORT_SELECTIVE_RESET 2 -#define PORT_DUMP 3 -#define PORT_SELECTION_MASK 3 - -typedef struct { - uint32_t st_sign; /* Self Test Signature */ - uint32_t st_result; /* Self Test Results */ -} eepro100_selftest_t; - -static uint32_t eepro100_read_port(EEPRO100State * s) -{ - return 0; -} - -static void eepro100_write_port(EEPRO100State *s) -{ - uint32_t val = e100_read_reg4(s, SCBPort); - uint32_t address = (val & ~PORT_SELECTION_MASK); - uint8_t selection = (val & PORT_SELECTION_MASK); - switch (selection) { - case PORT_SOFTWARE_RESET: - nic_reset(s); - break; - case PORT_SELFTEST: - TRACE(OTHER, logout("selftest address=0x%08x\n", address)); - eepro100_selftest_t data; - pci_dma_read(&s->dev, address, (uint8_t *) &data, sizeof(data)); - data.st_sign = 0xffffffff; - data.st_result = 0; - pci_dma_write(&s->dev, address, (uint8_t *) &data, sizeof(data)); - break; - case PORT_SELECTIVE_RESET: - TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n", address)); - nic_selective_reset(s); - break; - default: - logout("val=0x%08x\n", val); - missing("unknown port selection"); - } -} - -/***************************************************************************** - * - * General hardware emulation. - * - ****************************************************************************/ - -static uint8_t eepro100_read1(EEPRO100State * s, uint32_t addr) -{ - uint8_t val = 0; - if (addr <= sizeof(s->mem) - sizeof(val)) { - val = s->mem[addr]; - } - - switch (addr) { - case SCBStatus: - case SCBAck: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBCmd: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); -#if 0 - val = eepro100_read_command(s); -#endif - break; - case SCBIntmask: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBPort + 3: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBeeprom: - val = eepro100_read_eeprom(s); - break; - case SCBCtrlMDI: - case SCBCtrlMDI + 1: - case SCBCtrlMDI + 2: - case SCBCtrlMDI + 3: - val = (uint8_t)(eepro100_read_mdi(s) >> (8 * (addr & 3))); - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBpmdr: /* Power Management Driver Register */ - val = 0; - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBgctrl: /* General Control Register */ - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBgstat: /* General Status Register */ - /* 100 Mbps full duplex, valid link */ - val = 0x07; - TRACE(OTHER, logout("addr=General Status val=%02x\n", val)); - break; - default: - logout("addr=%s val=0x%02x\n", regname(addr), val); - missing("unknown byte read"); - } - return val; -} - -static uint16_t eepro100_read2(EEPRO100State * s, uint32_t addr) -{ - uint16_t val = 0; - if (addr <= sizeof(s->mem) - sizeof(val)) { - val = e100_read_reg2(s, addr); - } - - switch (addr) { - case SCBStatus: - case SCBCmd: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - case SCBeeprom: - val = eepro100_read_eeprom(s); - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - case SCBCtrlMDI: - case SCBCtrlMDI + 2: - val = (uint16_t)(eepro100_read_mdi(s) >> (8 * (addr & 3))); - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - default: - logout("addr=%s val=0x%04x\n", regname(addr), val); - missing("unknown word read"); - } - return val; -} - -static uint32_t eepro100_read4(EEPRO100State * s, uint32_t addr) -{ - uint32_t val = 0; - if (addr <= sizeof(s->mem) - sizeof(val)) { - val = e100_read_reg4(s, addr); - } - - switch (addr) { - case SCBStatus: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - break; - case SCBPointer: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - break; - case SCBPort: - val = eepro100_read_port(s); - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - break; - case SCBflash: - val = eepro100_read_eeprom(s); - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - break; - case SCBCtrlMDI: - val = eepro100_read_mdi(s); - break; - default: - logout("addr=%s val=0x%08x\n", regname(addr), val); - missing("unknown longword read"); - } - return val; -} - -static void eepro100_write1(EEPRO100State * s, uint32_t addr, uint8_t val) -{ - /* SCBStatus is readonly. */ - if (addr > SCBStatus && addr <= sizeof(s->mem) - sizeof(val)) { - s->mem[addr] = val; - } - - switch (addr) { - case SCBStatus: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBAck: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - eepro100_acknowledge(s); - break; - case SCBCmd: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - eepro100_write_command(s, val); - break; - case SCBIntmask: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - if (val & BIT(1)) { - eepro100_swi_interrupt(s); - } - eepro100_interrupt(s, 0); - break; - case SCBPointer: - case SCBPointer + 1: - case SCBPointer + 2: - case SCBPointer + 3: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBPort: - case SCBPort + 1: - case SCBPort + 2: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBPort + 3: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - eepro100_write_port(s); - break; - case SCBFlow: /* does not exist on 82557 */ - case SCBFlow + 1: - case SCBFlow + 2: - case SCBpmdr: /* does not exist on 82557 */ - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBeeprom: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - eepro100_write_eeprom(s->eeprom, val); - break; - case SCBCtrlMDI: - case SCBCtrlMDI + 1: - case SCBCtrlMDI + 2: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - break; - case SCBCtrlMDI + 3: - TRACE(OTHER, logout("addr=%s val=0x%02x\n", regname(addr), val)); - eepro100_write_mdi(s); - break; - default: - logout("addr=%s val=0x%02x\n", regname(addr), val); - missing("unknown byte write"); - } -} - -static void eepro100_write2(EEPRO100State * s, uint32_t addr, uint16_t val) -{ - /* SCBStatus is readonly. */ - if (addr > SCBStatus && addr <= sizeof(s->mem) - sizeof(val)) { - e100_write_reg2(s, addr, val); - } - - switch (addr) { - case SCBStatus: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - s->mem[SCBAck] = (val >> 8); - eepro100_acknowledge(s); - break; - case SCBCmd: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - eepro100_write_command(s, val); - eepro100_write1(s, SCBIntmask, val >> 8); - break; - case SCBPointer: - case SCBPointer + 2: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - case SCBPort: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - case SCBPort + 2: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - eepro100_write_port(s); - break; - case SCBeeprom: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - eepro100_write_eeprom(s->eeprom, val); - break; - case SCBCtrlMDI: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - break; - case SCBCtrlMDI + 2: - TRACE(OTHER, logout("addr=%s val=0x%04x\n", regname(addr), val)); - eepro100_write_mdi(s); - break; - default: - logout("addr=%s val=0x%04x\n", regname(addr), val); - missing("unknown word write"); - } -} - -static void eepro100_write4(EEPRO100State * s, uint32_t addr, uint32_t val) -{ - if (addr <= sizeof(s->mem) - sizeof(val)) { - e100_write_reg4(s, addr, val); - } - - switch (addr) { - case SCBPointer: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - break; - case SCBPort: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - eepro100_write_port(s); - break; - case SCBflash: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - val = val >> 16; - eepro100_write_eeprom(s->eeprom, val); - break; - case SCBCtrlMDI: - TRACE(OTHER, logout("addr=%s val=0x%08x\n", regname(addr), val)); - eepro100_write_mdi(s); - break; - default: - logout("addr=%s val=0x%08x\n", regname(addr), val); - missing("unknown longword write"); - } -} - -static uint64_t eepro100_read(void *opaque, hwaddr addr, - unsigned size) -{ - EEPRO100State *s = opaque; - - switch (size) { - case 1: return eepro100_read1(s, addr); - case 2: return eepro100_read2(s, addr); - case 4: return eepro100_read4(s, addr); - default: abort(); - } -} - -static void eepro100_write(void *opaque, hwaddr addr, - uint64_t data, unsigned size) -{ - EEPRO100State *s = opaque; - - switch (size) { - case 1: - eepro100_write1(s, addr, data); - break; - case 2: - eepro100_write2(s, addr, data); - break; - case 4: - eepro100_write4(s, addr, data); - break; - default: - abort(); - } -} - -static const MemoryRegionOps eepro100_ops = { - .read = eepro100_read, - .write = eepro100_write, - .endianness = DEVICE_LITTLE_ENDIAN, -}; - -static ssize_t nic_receive(NetClientState *nc, const uint8_t * buf, size_t size) -{ - /* TODO: - * - Magic packets should set bit 30 in power management driver register. - * - Interesting packets should set bit 29 in power management driver register. - */ - EEPRO100State *s = qemu_get_nic_opaque(nc); - uint16_t rfd_status = 0xa000; -#if defined(CONFIG_PAD_RECEIVED_FRAMES) - uint8_t min_buf[60]; -#endif - static const uint8_t broadcast_macaddr[6] = - { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - -#if defined(CONFIG_PAD_RECEIVED_FRAMES) - /* Pad to minimum Ethernet frame length */ - if (size < sizeof(min_buf)) { - memcpy(min_buf, buf, size); - memset(&min_buf[size], 0, sizeof(min_buf) - size); - buf = min_buf; - size = sizeof(min_buf); - } -#endif - - if (s->configuration[8] & 0x80) { - /* CSMA is disabled. */ - logout("%p received while CSMA is disabled\n", s); - return -1; -#if !defined(CONFIG_PAD_RECEIVED_FRAMES) - } else if (size < 64 && (s->configuration[7] & BIT(0))) { - /* Short frame and configuration byte 7/0 (discard short receive) set: - * Short frame is discarded */ - logout("%p received short frame (%zu byte)\n", s, size); - s->statistics.rx_short_frame_errors++; - return -1; -#endif - } else if ((size > MAX_ETH_FRAME_SIZE + 4) && !(s->configuration[18] & BIT(3))) { - /* Long frame and configuration byte 18/3 (long receive ok) not set: - * Long frames are discarded. */ - logout("%p received long frame (%zu byte), ignored\n", s, size); - return -1; - } else if (memcmp(buf, s->conf.macaddr.a, 6) == 0) { /* !!! */ - /* Frame matches individual address. */ - /* TODO: check configuration byte 15/4 (ignore U/L). */ - TRACE(RXTX, logout("%p received frame for me, len=%zu\n", s, size)); - } else if (memcmp(buf, broadcast_macaddr, 6) == 0) { - /* Broadcast frame. */ - TRACE(RXTX, logout("%p received broadcast, len=%zu\n", s, size)); - rfd_status |= 0x0002; - } else if (buf[0] & 0x01) { - /* Multicast frame. */ - TRACE(RXTX, logout("%p received multicast, len=%zu,%s\n", s, size, nic_dump(buf, size))); - if (s->configuration[21] & BIT(3)) { - /* Multicast all bit is set, receive all multicast frames. */ - } else { - unsigned mcast_idx = e100_compute_mcast_idx(buf); - assert(mcast_idx < 64); - if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) { - /* Multicast frame is allowed in hash table. */ - } else if (s->configuration[15] & BIT(0)) { - /* Promiscuous: receive all. */ - rfd_status |= 0x0004; - } else { - TRACE(RXTX, logout("%p multicast ignored\n", s)); - return -1; - } - } - /* TODO: Next not for promiscuous mode? */ - rfd_status |= 0x0002; - } else if (s->configuration[15] & BIT(0)) { - /* Promiscuous: receive all. */ - TRACE(RXTX, logout("%p received frame in promiscuous mode, len=%zu\n", s, size)); - rfd_status |= 0x0004; - } else if (s->configuration[20] & BIT(6)) { - /* Multiple IA bit set. */ - unsigned mcast_idx = compute_mcast_idx(buf); - assert(mcast_idx < 64); - if (s->mult[mcast_idx >> 3] & (1 << (mcast_idx & 7))) { - TRACE(RXTX, logout("%p accepted, multiple IA bit set\n", s)); - } else { - TRACE(RXTX, logout("%p frame ignored, multiple IA bit set\n", s)); - return -1; - } - } else { - TRACE(RXTX, logout("%p received frame, ignored, len=%zu,%s\n", s, size, - nic_dump(buf, size))); - return size; - } - - if (get_ru_state(s) != ru_ready) { - /* No resources available. */ - logout("no resources, state=%u\n", get_ru_state(s)); - /* TODO: RNR interrupt only at first failed frame? */ - eepro100_rnr_interrupt(s); - s->statistics.rx_resource_errors++; -#if 0 - assert(!"no resources"); -#endif - return -1; - } - /* !!! */ - eepro100_rx_t rx; - pci_dma_read(&s->dev, s->ru_base + s->ru_offset, - &rx, sizeof(eepro100_rx_t)); - uint16_t rfd_command = le16_to_cpu(rx.command); - uint16_t rfd_size = le16_to_cpu(rx.size); - - if (size > rfd_size) { - logout("Receive buffer (%" PRId16 " bytes) too small for data " - "(%zu bytes); data truncated\n", rfd_size, size); - size = rfd_size; - } -#if !defined(CONFIG_PAD_RECEIVED_FRAMES) - if (size < 64) { - rfd_status |= 0x0080; - } -#endif - TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n", - rfd_command, rx.link, rx.rx_buf_addr, rfd_size)); - stw_le_pci_dma(&s->dev, s->ru_base + s->ru_offset + - offsetof(eepro100_rx_t, status), rfd_status); - stw_le_pci_dma(&s->dev, s->ru_base + s->ru_offset + - offsetof(eepro100_rx_t, count), size); - /* Early receive interrupt not supported. */ -#if 0 - eepro100_er_interrupt(s); -#endif - /* Receive CRC Transfer not supported. */ - if (s->configuration[18] & BIT(2)) { - missing("Receive CRC Transfer"); - return -1; - } - /* TODO: check stripping enable bit. */ -#if 0 - assert(!(s->configuration[17] & BIT(0))); -#endif - pci_dma_write(&s->dev, s->ru_base + s->ru_offset + - sizeof(eepro100_rx_t), buf, size); - s->statistics.rx_good_frames++; - eepro100_fr_interrupt(s); - s->ru_offset = le32_to_cpu(rx.link); - if (rfd_command & COMMAND_EL) { - /* EL bit is set, so this was the last frame. */ - logout("receive: Running out of frames\n"); - set_ru_state(s, ru_no_resources); - eepro100_rnr_interrupt(s); - } - if (rfd_command & COMMAND_S) { - /* S bit is set. */ - set_ru_state(s, ru_suspended); - } - return size; -} - -static const VMStateDescription vmstate_eepro100 = { - .version_id = 3, - .minimum_version_id = 2, - .fields = (VMStateField[]) { - VMSTATE_PCI_DEVICE(dev, EEPRO100State), - VMSTATE_UNUSED(32), - VMSTATE_BUFFER(mult, EEPRO100State), - VMSTATE_BUFFER(mem, EEPRO100State), - /* Save all members of struct between scb_stat and mem. */ - VMSTATE_UINT8(scb_stat, EEPRO100State), - VMSTATE_UINT8(int_stat, EEPRO100State), - VMSTATE_UNUSED(3*4), - VMSTATE_MACADDR(conf.macaddr, EEPRO100State), - VMSTATE_UNUSED(19*4), - VMSTATE_UINT16_ARRAY(mdimem, EEPRO100State, 32), - /* The eeprom should be saved and restored by its own routines. */ - VMSTATE_UINT32(device, EEPRO100State), - /* TODO check device. */ - VMSTATE_UINT32(cu_base, EEPRO100State), - VMSTATE_UINT32(cu_offset, EEPRO100State), - VMSTATE_UINT32(ru_base, EEPRO100State), - VMSTATE_UINT32(ru_offset, EEPRO100State), - VMSTATE_UINT32(statsaddr, EEPRO100State), - /* Save eepro100_stats_t statistics. */ - VMSTATE_UINT32(statistics.tx_good_frames, EEPRO100State), - VMSTATE_UINT32(statistics.tx_max_collisions, EEPRO100State), - VMSTATE_UINT32(statistics.tx_late_collisions, EEPRO100State), - VMSTATE_UINT32(statistics.tx_underruns, EEPRO100State), - VMSTATE_UINT32(statistics.tx_lost_crs, EEPRO100State), - VMSTATE_UINT32(statistics.tx_deferred, EEPRO100State), - VMSTATE_UINT32(statistics.tx_single_collisions, EEPRO100State), - VMSTATE_UINT32(statistics.tx_multiple_collisions, EEPRO100State), - VMSTATE_UINT32(statistics.tx_total_collisions, EEPRO100State), - VMSTATE_UINT32(statistics.rx_good_frames, EEPRO100State), - VMSTATE_UINT32(statistics.rx_crc_errors, EEPRO100State), - VMSTATE_UINT32(statistics.rx_alignment_errors, EEPRO100State), - VMSTATE_UINT32(statistics.rx_resource_errors, EEPRO100State), - VMSTATE_UINT32(statistics.rx_overrun_errors, EEPRO100State), - VMSTATE_UINT32(statistics.rx_cdt_errors, EEPRO100State), - VMSTATE_UINT32(statistics.rx_short_frame_errors, EEPRO100State), - VMSTATE_UINT32(statistics.fc_xmt_pause, EEPRO100State), - VMSTATE_UINT32(statistics.fc_rcv_pause, EEPRO100State), - VMSTATE_UINT32(statistics.fc_rcv_unsupported, EEPRO100State), - VMSTATE_UINT16(statistics.xmt_tco_frames, EEPRO100State), - VMSTATE_UINT16(statistics.rcv_tco_frames, EEPRO100State), - /* Configuration bytes. */ - VMSTATE_BUFFER(configuration, EEPRO100State), - VMSTATE_END_OF_LIST() - } -}; - -static void pci_nic_uninit(PCIDevice *pci_dev) -{ - EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev); - - vmstate_unregister(&pci_dev->qdev, s->vmstate, s); - eeprom93xx_free(&pci_dev->qdev, s->eeprom); - qemu_del_nic(s->nic); -} - -static NetClientInfo net_eepro100_info = { - .type = NET_CLIENT_OPTIONS_KIND_NIC, - .size = sizeof(NICState), - .receive = nic_receive, -}; - -static void e100_nic_realize(PCIDevice *pci_dev, Error **errp) -{ - EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev); - E100PCIDeviceInfo *info = eepro100_get_class(s); - - TRACE(OTHER, logout("\n")); - - s->device = info->device; - - e100_pci_reset(s); - - /* Add 64 * 2 EEPROM. i82557 and i82558 support a 64 word EEPROM, - * i82559 and later support 64 or 256 word EEPROM. */ - s->eeprom = eeprom93xx_new(&pci_dev->qdev, EEPROM_SIZE); - - /* Handler for memory-mapped I/O */ - memory_region_init_io(&s->mmio_bar, OBJECT(s), &eepro100_ops, s, - "eepro100-mmio", PCI_MEM_SIZE); - pci_register_bar(&s->dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &s->mmio_bar); - memory_region_init_io(&s->io_bar, OBJECT(s), &eepro100_ops, s, - "eepro100-io", PCI_IO_SIZE); - pci_register_bar(&s->dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar); - /* FIXME: flash aliases to mmio?! */ - memory_region_init_io(&s->flash_bar, OBJECT(s), &eepro100_ops, s, - "eepro100-flash", PCI_FLASH_SIZE); - pci_register_bar(&s->dev, 2, 0, &s->flash_bar); - - qemu_macaddr_default_if_unset(&s->conf.macaddr); - logout("macaddr: %s\n", nic_dump(&s->conf.macaddr.a[0], 6)); - - nic_reset(s); - - s->nic = qemu_new_nic(&net_eepro100_info, &s->conf, - object_get_typename(OBJECT(pci_dev)), pci_dev->qdev.id, s); - - qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); - TRACE(OTHER, logout("%s\n", qemu_get_queue(s->nic)->info_str)); - - qemu_register_reset(nic_reset, s); - - s->vmstate = g_malloc(sizeof(vmstate_eepro100)); - memcpy(s->vmstate, &vmstate_eepro100, sizeof(vmstate_eepro100)); - s->vmstate->name = qemu_get_queue(s->nic)->model; - vmstate_register(&pci_dev->qdev, -1, s->vmstate, s); -} - -static void eepro100_instance_init(Object *obj) -{ - EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, PCI_DEVICE(obj)); - device_add_bootindex_property(obj, &s->conf.bootindex, - "bootindex", "/ethernet-phy@0", - DEVICE(s), NULL); -} - -static E100PCIDeviceInfo e100_devices[] = { - { - .name = "i82550", - .desc = "Intel i82550 Ethernet", - .device = i82550, - /* TODO: check device id. */ - .device_id = PCI_DEVICE_ID_INTEL_82551IT, - /* Revision ID: 0x0c, 0x0d, 0x0e. */ - .revision = 0x0e, - /* TODO: check size of statistical counters. */ - .stats_size = 80, - /* TODO: check extended tcb support. */ - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82551", - .desc = "Intel i82551 Ethernet", - .device = i82551, - .device_id = PCI_DEVICE_ID_INTEL_82551IT, - /* Revision ID: 0x0f, 0x10. */ - .revision = 0x0f, - /* TODO: check size of statistical counters. */ - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82557a", - .desc = "Intel i82557A Ethernet", - .device = i82557A, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x01, - .power_management = false, - },{ - .name = "i82557b", - .desc = "Intel i82557B Ethernet", - .device = i82557B, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x02, - .power_management = false, - },{ - .name = "i82557c", - .desc = "Intel i82557C Ethernet", - .device = i82557C, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x03, - .power_management = false, - },{ - .name = "i82558a", - .desc = "Intel i82558A Ethernet", - .device = i82558A, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x04, - .stats_size = 76, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82558b", - .desc = "Intel i82558B Ethernet", - .device = i82558B, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x05, - .stats_size = 76, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82559a", - .desc = "Intel i82559A Ethernet", - .device = i82559A, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x06, - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82559b", - .desc = "Intel i82559B Ethernet", - .device = i82559B, - .device_id = PCI_DEVICE_ID_INTEL_82557, - .revision = 0x07, - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82559c", - .desc = "Intel i82559C Ethernet", - .device = i82559C, - .device_id = PCI_DEVICE_ID_INTEL_82557, -#if 0 - .revision = 0x08, -#endif - /* TODO: Windows wants revision id 0x0c. */ - .revision = 0x0c, -#if EEPROM_SIZE > 0 - .subsystem_vendor_id = PCI_VENDOR_ID_INTEL, - .subsystem_id = 0x0040, -#endif - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82559er", - .desc = "Intel i82559ER Ethernet", - .device = i82559ER, - .device_id = PCI_DEVICE_ID_INTEL_82551IT, - .revision = 0x09, - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - .name = "i82562", - .desc = "Intel i82562 Ethernet", - .device = i82562, - /* TODO: check device id. */ - .device_id = PCI_DEVICE_ID_INTEL_82551IT, - /* TODO: wrong revision id. */ - .revision = 0x0e, - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - },{ - /* Toshiba Tecra 8200. */ - .name = "i82801", - .desc = "Intel i82801 Ethernet", - .device = i82801, - .device_id = 0x2449, - .revision = 0x03, - .stats_size = 80, - .has_extended_tcb_support = true, - .power_management = true, - } -}; - -static E100PCIDeviceInfo *eepro100_get_class_by_name(const char *typename) -{ - E100PCIDeviceInfo *info = NULL; - int i; - - /* This is admittedly awkward but also temporary. QOM allows for - * parameterized typing and for subclassing both of which would suitable - * handle what's going on here. But class_data is already being used as - * a stop-gap hack to allow incremental qdev conversion so we cannot use it - * right now. Once we merge the final QOM series, we can come back here and - * do this in a much more elegant fashion. - */ - for (i = 0; i < ARRAY_SIZE(e100_devices); i++) { - if (strcmp(e100_devices[i].name, typename) == 0) { - info = &e100_devices[i]; - break; - } - } - assert(info != NULL); - - return info; -} - -static E100PCIDeviceInfo *eepro100_get_class(EEPRO100State *s) -{ - return eepro100_get_class_by_name(object_get_typename(OBJECT(s))); -} - -static Property e100_properties[] = { - DEFINE_NIC_PROPERTIES(EEPRO100State, conf), - DEFINE_PROP_END_OF_LIST(), -}; - -static void eepro100_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); - E100PCIDeviceInfo *info; - - info = eepro100_get_class_by_name(object_class_get_name(klass)); - - set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); - dc->props = e100_properties; - dc->desc = info->desc; - k->vendor_id = PCI_VENDOR_ID_INTEL; - k->class_id = PCI_CLASS_NETWORK_ETHERNET; - k->romfile = "pxe-eepro100.rom"; - k->realize = e100_nic_realize; - k->exit = pci_nic_uninit; - k->device_id = info->device_id; - k->revision = info->revision; - k->subsystem_vendor_id = info->subsystem_vendor_id; - k->subsystem_id = info->subsystem_id; -} - -static void eepro100_register_types(void) -{ - size_t i; - for (i = 0; i < ARRAY_SIZE(e100_devices); i++) { - TypeInfo type_info = {}; - E100PCIDeviceInfo *info = &e100_devices[i]; - - type_info.name = info->name; - type_info.parent = TYPE_PCI_DEVICE; - type_info.class_init = eepro100_class_init; - type_info.instance_size = sizeof(EEPRO100State); - type_info.instance_init = eepro100_instance_init; - - type_register(&type_info); - } -} - -type_init(eepro100_register_types) |