Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 221 insertions, 0 deletions

diff --git a/qemu/hw/microblaze/petalogix_ml605_mmu.c b/qemu/hw/microblaze/petalogix_ml605_mmu.c
new file mode 100644
index 000000000..ed84a37e6
--- /dev/null
+++ b/qemu/hw/microblaze/petalogix_ml605_mmu.c
@@ -0,0 +1,221 @@
+/*
+ * Model of Petalogix linux reference design targeting Xilinx Spartan ml605
+ * board.
+ *
+ * Copyright (c) 2011 Michal Simek <monstr@monstr.eu>
+ * Copyright (c) 2011 PetaLogix
+ * Copyright (c) 2009 Edgar E. Iglesias.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+#include "net/net.h"
+#include "hw/block/flash.h"
+#include "sysemu/sysemu.h"
+#include "hw/devices.h"
+#include "hw/boards.h"
+#include "sysemu/block-backend.h"
+#include "hw/char/serial.h"
+#include "exec/address-spaces.h"
+#include "hw/ssi.h"
+
+#include "boot.h"
+
+#include "hw/stream.h"
+
+#define LMB_BRAM_SIZE  (128 * 1024)
+#define FLASH_SIZE     (32 * 1024 * 1024)
+
+#define BINARY_DEVICE_TREE_FILE "petalogix-ml605.dtb"
+
+#define NUM_SPI_FLASHES 4
+
+#define SPI_BASEADDR 0x40a00000
+#define MEMORY_BASEADDR 0x50000000
+#define FLASH_BASEADDR 0x86000000
+#define INTC_BASEADDR 0x81800000
+#define TIMER_BASEADDR 0x83c00000
+#define UART16550_BASEADDR 0x83e00000
+#define AXIENET_BASEADDR 0x82780000
+#define AXIDMA_BASEADDR 0x84600000
+
+#define AXIDMA_IRQ1         0
+#define AXIDMA_IRQ0         1
+#define TIMER_IRQ           2
+#define AXIENET_IRQ         3
+#define SPI_IRQ             4
+#define UART16550_IRQ       5
+
+static void
+petalogix_ml605_init(MachineState *machine)
+{
+    ram_addr_t ram_size = machine->ram_size;
+    MemoryRegion *address_space_mem = get_system_memory();
+    DeviceState *dev, *dma, *eth0;
+    Object *ds, *cs;
+    MicroBlazeCPU *cpu;
+    SysBusDevice *busdev;
+    DriveInfo *dinfo;
+    int i;
+    MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
+    MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
+    qemu_irq irq[32];
+
+    /* init CPUs */
+    cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
+    /* Use FPU but don't use floating point conversion and square
+     * root instructions
+     */
+    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
+    object_property_set_bool(OBJECT(cpu), true, "dcache-writeback",
+                             &error_abort);
+    object_property_set_bool(OBJECT(cpu), true, "endianness", &error_abort);
+    object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
+
+    /* Attach emulated BRAM through the LMB.  */
+    memory_region_init_ram(phys_lmb_bram, NULL, "petalogix_ml605.lmb_bram",
+                           LMB_BRAM_SIZE, &error_abort);
+    vmstate_register_ram_global(phys_lmb_bram);
+    memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
+
+    memory_region_init_ram(phys_ram, NULL, "petalogix_ml605.ram", ram_size,
+                           &error_abort);
+    vmstate_register_ram_global(phys_ram);
+    memory_region_add_subregion(address_space_mem, MEMORY_BASEADDR, phys_ram);
+
+    dinfo = drive_get(IF_PFLASH, 0, 0);
+    /* 5th parameter 2 means bank-width
+     * 10th paremeter 0 means little-endian */
+    pflash_cfi01_register(FLASH_BASEADDR,
+                          NULL, "petalogix_ml605.flash", FLASH_SIZE,
+                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
+                          (64 * 1024), FLASH_SIZE >> 16,
+                          2, 0x89, 0x18, 0x0000, 0x0, 0);
+
+
+    dev = qdev_create(NULL, "xlnx.xps-intc");
+    qdev_prop_set_uint32(dev, "kind-of-intr", 1 << TIMER_IRQ);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
+                       qdev_get_gpio_in(DEVICE(cpu), MB_CPU_IRQ));
+    for (i = 0; i < 32; i++) {
+        irq[i] = qdev_get_gpio_in(dev, i);
+    }
+
+    serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
+                   irq[UART16550_IRQ], 115200, serial_hds[0],
+                   DEVICE_LITTLE_ENDIAN);
+
+    /* 2 timers at irq 2 @ 100 Mhz.  */
+    dev = qdev_create(NULL, "xlnx.xps-timer");
+    qdev_prop_set_uint32(dev, "one-timer-only", 0);
+    qdev_prop_set_uint32(dev, "clock-frequency", 100 * 1000000);
+    qdev_init_nofail(dev);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]);
+
+    /* axi ethernet and dma initialization. */
+    qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
+    eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
+    dma = qdev_create(NULL, "xlnx.axi-dma");
+
+    /* FIXME: attach to the sysbus instead */
+    object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0),
+                              NULL);
+    object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma),
+                              NULL);
+
+    ds = object_property_get_link(OBJECT(dma),
+                                  "axistream-connected-target", NULL);
+    cs = object_property_get_link(OBJECT(dma),
+                                  "axistream-control-connected-target", NULL);
+    qdev_set_nic_properties(eth0, &nd_table[0]);
+    qdev_prop_set_uint32(eth0, "rxmem", 0x1000);
+    qdev_prop_set_uint32(eth0, "txmem", 0x1000);
+    object_property_set_link(OBJECT(eth0), OBJECT(ds),
+                             "axistream-connected", &error_abort);
+    object_property_set_link(OBJECT(eth0), OBJECT(cs),
+                             "axistream-control-connected", &error_abort);
+    qdev_init_nofail(eth0);
+    sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]);
+
+    ds = object_property_get_link(OBJECT(eth0),
+                                  "axistream-connected-target", NULL);
+    cs = object_property_get_link(OBJECT(eth0),
+                                  "axistream-control-connected-target", NULL);
+    qdev_prop_set_uint32(dma, "freqhz", 100 * 1000000);
+    object_property_set_link(OBJECT(dma), OBJECT(ds),
+                             "axistream-connected", &error_abort);
+    object_property_set_link(OBJECT(dma), OBJECT(cs),
+                             "axistream-control-connected", &error_abort);
+    qdev_init_nofail(dma);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]);
+
+    {
+        SSIBus *spi;
+
+        dev = qdev_create(NULL, "xlnx.xps-spi");
+        qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
+        qdev_init_nofail(dev);
+        busdev = SYS_BUS_DEVICE(dev);
+        sysbus_mmio_map(busdev, 0, SPI_BASEADDR);
+        sysbus_connect_irq(busdev, 0, irq[SPI_IRQ]);
+
+        spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
+
+        for (i = 0; i < NUM_SPI_FLASHES; i++) {
+            qemu_irq cs_line;
+
+            dev = ssi_create_slave(spi, "n25q128");
+            cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
+            sysbus_connect_irq(busdev, i+1, cs_line);
+        }
+    }
+
+    /* setup PVR to match kernel settings */
+    cpu->env.pvr.regs[4] = 0xc56b8000;
+    cpu->env.pvr.regs[5] = 0xc56be000;
+    cpu->env.pvr.regs[10] = 0x0e000000; /* virtex 6 */
+
+    microblaze_load_kernel(cpu, MEMORY_BASEADDR, ram_size,
+                           machine->initrd_filename,
+                           BINARY_DEVICE_TREE_FILE,
+                           NULL);
+
+}
+
+static QEMUMachine petalogix_ml605_machine = {
+    .name = "petalogix-ml605",
+    .desc = "PetaLogix linux refdesign for xilinx ml605 little endian",
+    .init = petalogix_ml605_init,
+    .is_default = 0,
+};
+
+static void petalogix_ml605_machine_init(void)
+{
+    qemu_register_machine(&petalogix_ml605_machine);
+}
+
+machine_init(petalogix_ml605_machine_init);