diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/m68k/mcf5206.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/m68k/mcf5206.c')
-rw-r--r-- | qemu/hw/m68k/mcf5206.c | 548 |
1 files changed, 548 insertions, 0 deletions
diff --git a/qemu/hw/m68k/mcf5206.c b/qemu/hw/m68k/mcf5206.c new file mode 100644 index 000000000..1727a4685 --- /dev/null +++ b/qemu/hw/m68k/mcf5206.c @@ -0,0 +1,548 @@ +/* + * Motorola ColdFire MCF5206 SoC embedded peripheral emulation. + * + * Copyright (c) 2007 CodeSourcery. + * + * This code is licensed under the GPL + */ +#include "hw/hw.h" +#include "hw/m68k/mcf.h" +#include "qemu/timer.h" +#include "hw/ptimer.h" +#include "sysemu/sysemu.h" +#include "exec/address-spaces.h" + +/* General purpose timer module. */ +typedef struct { + uint16_t tmr; + uint16_t trr; + uint16_t tcr; + uint16_t ter; + ptimer_state *timer; + qemu_irq irq; + int irq_state; +} m5206_timer_state; + +#define TMR_RST 0x01 +#define TMR_CLK 0x06 +#define TMR_FRR 0x08 +#define TMR_ORI 0x10 +#define TMR_OM 0x20 +#define TMR_CE 0xc0 + +#define TER_CAP 0x01 +#define TER_REF 0x02 + +static void m5206_timer_update(m5206_timer_state *s) +{ + if ((s->tmr & TMR_ORI) != 0 && (s->ter & TER_REF)) + qemu_irq_raise(s->irq); + else + qemu_irq_lower(s->irq); +} + +static void m5206_timer_reset(m5206_timer_state *s) +{ + s->tmr = 0; + s->trr = 0; +} + +static void m5206_timer_recalibrate(m5206_timer_state *s) +{ + int prescale; + int mode; + + ptimer_stop(s->timer); + + if ((s->tmr & TMR_RST) == 0) + return; + + prescale = (s->tmr >> 8) + 1; + mode = (s->tmr >> 1) & 3; + if (mode == 2) + prescale *= 16; + + if (mode == 3 || mode == 0) + hw_error("m5206_timer: mode %d not implemented\n", mode); + if ((s->tmr & TMR_FRR) == 0) + hw_error("m5206_timer: free running mode not implemented\n"); + + /* Assume 66MHz system clock. */ + ptimer_set_freq(s->timer, 66000000 / prescale); + + ptimer_set_limit(s->timer, s->trr, 0); + + ptimer_run(s->timer, 0); +} + +static void m5206_timer_trigger(void *opaque) +{ + m5206_timer_state *s = (m5206_timer_state *)opaque; + s->ter |= TER_REF; + m5206_timer_update(s); +} + +static uint32_t m5206_timer_read(m5206_timer_state *s, uint32_t addr) +{ + switch (addr) { + case 0: + return s->tmr; + case 4: + return s->trr; + case 8: + return s->tcr; + case 0xc: + return s->trr - ptimer_get_count(s->timer); + case 0x11: + return s->ter; + default: + return 0; + } +} + +static void m5206_timer_write(m5206_timer_state *s, uint32_t addr, uint32_t val) +{ + switch (addr) { + case 0: + if ((s->tmr & TMR_RST) != 0 && (val & TMR_RST) == 0) { + m5206_timer_reset(s); + } + s->tmr = val; + m5206_timer_recalibrate(s); + break; + case 4: + s->trr = val; + m5206_timer_recalibrate(s); + break; + case 8: + s->tcr = val; + break; + case 0xc: + ptimer_set_count(s->timer, val); + break; + case 0x11: + s->ter &= ~val; + break; + default: + break; + } + m5206_timer_update(s); +} + +static m5206_timer_state *m5206_timer_init(qemu_irq irq) +{ + m5206_timer_state *s; + QEMUBH *bh; + + s = (m5206_timer_state *)g_malloc0(sizeof(m5206_timer_state)); + bh = qemu_bh_new(m5206_timer_trigger, s); + s->timer = ptimer_init(bh); + s->irq = irq; + m5206_timer_reset(s); + return s; +} + +/* System Integration Module. */ + +typedef struct { + M68kCPU *cpu; + MemoryRegion iomem; + m5206_timer_state *timer[2]; + void *uart[2]; + uint8_t scr; + uint8_t icr[14]; + uint16_t imr; /* 1 == interrupt is masked. */ + uint16_t ipr; + uint8_t rsr; + uint8_t swivr; + uint8_t par; + /* Include the UART vector registers here. */ + uint8_t uivr[2]; +} m5206_mbar_state; + +/* Interrupt controller. */ + +static int m5206_find_pending_irq(m5206_mbar_state *s) +{ + int level; + int vector; + uint16_t active; + int i; + + level = 0; + vector = 0; + active = s->ipr & ~s->imr; + if (!active) + return 0; + + for (i = 1; i < 14; i++) { + if (active & (1 << i)) { + if ((s->icr[i] & 0x1f) > level) { + level = s->icr[i] & 0x1f; + vector = i; + } + } + } + + if (level < 4) + vector = 0; + + return vector; +} + +static void m5206_mbar_update(m5206_mbar_state *s) +{ + int irq; + int vector; + int level; + + irq = m5206_find_pending_irq(s); + if (irq) { + int tmp; + tmp = s->icr[irq]; + level = (tmp >> 2) & 7; + if (tmp & 0x80) { + /* Autovector. */ + vector = 24 + level; + } else { + switch (irq) { + case 8: /* SWT */ + vector = s->swivr; + break; + case 12: /* UART1 */ + vector = s->uivr[0]; + break; + case 13: /* UART2 */ + vector = s->uivr[1]; + break; + default: + /* Unknown vector. */ + fprintf(stderr, "Unhandled vector for IRQ %d\n", irq); + vector = 0xf; + break; + } + } + } else { + level = 0; + vector = 0; + } + m68k_set_irq_level(s->cpu, level, vector); +} + +static void m5206_mbar_set_irq(void *opaque, int irq, int level) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + if (level) { + s->ipr |= 1 << irq; + } else { + s->ipr &= ~(1 << irq); + } + m5206_mbar_update(s); +} + +/* System Integration Module. */ + +static void m5206_mbar_reset(m5206_mbar_state *s) +{ + s->scr = 0xc0; + s->icr[1] = 0x04; + s->icr[2] = 0x08; + s->icr[3] = 0x0c; + s->icr[4] = 0x10; + s->icr[5] = 0x14; + s->icr[6] = 0x18; + s->icr[7] = 0x1c; + s->icr[8] = 0x1c; + s->icr[9] = 0x80; + s->icr[10] = 0x80; + s->icr[11] = 0x80; + s->icr[12] = 0x00; + s->icr[13] = 0x00; + s->imr = 0x3ffe; + s->rsr = 0x80; + s->swivr = 0x0f; + s->par = 0; +} + +static uint64_t m5206_mbar_read(m5206_mbar_state *s, + uint64_t offset, unsigned size) +{ + if (offset >= 0x100 && offset < 0x120) { + return m5206_timer_read(s->timer[0], offset - 0x100); + } else if (offset >= 0x120 && offset < 0x140) { + return m5206_timer_read(s->timer[1], offset - 0x120); + } else if (offset >= 0x140 && offset < 0x160) { + return mcf_uart_read(s->uart[0], offset - 0x140, size); + } else if (offset >= 0x180 && offset < 0x1a0) { + return mcf_uart_read(s->uart[1], offset - 0x180, size); + } + switch (offset) { + case 0x03: return s->scr; + case 0x14 ... 0x20: return s->icr[offset - 0x13]; + case 0x36: return s->imr; + case 0x3a: return s->ipr; + case 0x40: return s->rsr; + case 0x41: return 0; + case 0x42: return s->swivr; + case 0x50: + /* DRAM mask register. */ + /* FIXME: currently hardcoded to 128Mb. */ + { + uint32_t mask = ~0; + while (mask > ram_size) + mask >>= 1; + return mask & 0x0ffe0000; + } + case 0x5c: return 1; /* DRAM bank 1 empty. */ + case 0xcb: return s->par; + case 0x170: return s->uivr[0]; + case 0x1b0: return s->uivr[1]; + } + hw_error("Bad MBAR read offset 0x%x", (int)offset); + return 0; +} + +static void m5206_mbar_write(m5206_mbar_state *s, uint32_t offset, + uint64_t value, unsigned size) +{ + if (offset >= 0x100 && offset < 0x120) { + m5206_timer_write(s->timer[0], offset - 0x100, value); + return; + } else if (offset >= 0x120 && offset < 0x140) { + m5206_timer_write(s->timer[1], offset - 0x120, value); + return; + } else if (offset >= 0x140 && offset < 0x160) { + mcf_uart_write(s->uart[0], offset - 0x140, value, size); + return; + } else if (offset >= 0x180 && offset < 0x1a0) { + mcf_uart_write(s->uart[1], offset - 0x180, value, size); + return; + } + switch (offset) { + case 0x03: + s->scr = value; + break; + case 0x14 ... 0x20: + s->icr[offset - 0x13] = value; + m5206_mbar_update(s); + break; + case 0x36: + s->imr = value; + m5206_mbar_update(s); + break; + case 0x40: + s->rsr &= ~value; + break; + case 0x41: + /* TODO: implement watchdog. */ + break; + case 0x42: + s->swivr = value; + break; + case 0xcb: + s->par = value; + break; + case 0x170: + s->uivr[0] = value; + break; + case 0x178: case 0x17c: case 0x1c8: case 0x1bc: + /* Not implemented: UART Output port bits. */ + break; + case 0x1b0: + s->uivr[1] = value; + break; + default: + hw_error("Bad MBAR write offset 0x%x", (int)offset); + break; + } +} + +/* Internal peripherals use a variety of register widths. + This lookup table allows a single routine to handle all of them. */ +static const uint8_t m5206_mbar_width[] = +{ + /* 000-040 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, + /* 040-080 */ 1, 2, 2, 2, 4, 1, 2, 4, 1, 2, 4, 2, 2, 4, 2, 2, + /* 080-0c0 */ 4, 2, 2, 4, 2, 2, 4, 2, 2, 4, 2, 2, 4, 2, 2, 4, + /* 0c0-100 */ 2, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + /* 100-140 */ 2, 2, 2, 2, 1, 0, 0, 0, 2, 2, 2, 2, 1, 0, 0, 0, + /* 140-180 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + /* 180-1c0 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + /* 1c0-200 */ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, +}; + +static uint32_t m5206_mbar_readw(void *opaque, hwaddr offset); +static uint32_t m5206_mbar_readl(void *opaque, hwaddr offset); + +static uint32_t m5206_mbar_readb(void *opaque, hwaddr offset) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR read offset 0x%x", (int)offset); + } + if (m5206_mbar_width[offset >> 2] > 1) { + uint16_t val; + val = m5206_mbar_readw(opaque, offset & ~1); + if ((offset & 1) == 0) { + val >>= 8; + } + return val & 0xff; + } + return m5206_mbar_read(s, offset, 1); +} + +static uint32_t m5206_mbar_readw(void *opaque, hwaddr offset) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + int width; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR read offset 0x%x", (int)offset); + } + width = m5206_mbar_width[offset >> 2]; + if (width > 2) { + uint32_t val; + val = m5206_mbar_readl(opaque, offset & ~3); + if ((offset & 3) == 0) + val >>= 16; + return val & 0xffff; + } else if (width < 2) { + uint16_t val; + val = m5206_mbar_readb(opaque, offset) << 8; + val |= m5206_mbar_readb(opaque, offset + 1); + return val; + } + return m5206_mbar_read(s, offset, 2); +} + +static uint32_t m5206_mbar_readl(void *opaque, hwaddr offset) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + int width; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR read offset 0x%x", (int)offset); + } + width = m5206_mbar_width[offset >> 2]; + if (width < 4) { + uint32_t val; + val = m5206_mbar_readw(opaque, offset) << 16; + val |= m5206_mbar_readw(opaque, offset + 2); + return val; + } + return m5206_mbar_read(s, offset, 4); +} + +static void m5206_mbar_writew(void *opaque, hwaddr offset, + uint32_t value); +static void m5206_mbar_writel(void *opaque, hwaddr offset, + uint32_t value); + +static void m5206_mbar_writeb(void *opaque, hwaddr offset, + uint32_t value) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + int width; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR write offset 0x%x", (int)offset); + } + width = m5206_mbar_width[offset >> 2]; + if (width > 1) { + uint32_t tmp; + tmp = m5206_mbar_readw(opaque, offset & ~1); + if (offset & 1) { + tmp = (tmp & 0xff00) | value; + } else { + tmp = (tmp & 0x00ff) | (value << 8); + } + m5206_mbar_writew(opaque, offset & ~1, tmp); + return; + } + m5206_mbar_write(s, offset, value, 1); +} + +static void m5206_mbar_writew(void *opaque, hwaddr offset, + uint32_t value) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + int width; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR write offset 0x%x", (int)offset); + } + width = m5206_mbar_width[offset >> 2]; + if (width > 2) { + uint32_t tmp; + tmp = m5206_mbar_readl(opaque, offset & ~3); + if (offset & 3) { + tmp = (tmp & 0xffff0000) | value; + } else { + tmp = (tmp & 0x0000ffff) | (value << 16); + } + m5206_mbar_writel(opaque, offset & ~3, tmp); + return; + } else if (width < 2) { + m5206_mbar_writeb(opaque, offset, value >> 8); + m5206_mbar_writeb(opaque, offset + 1, value & 0xff); + return; + } + m5206_mbar_write(s, offset, value, 2); +} + +static void m5206_mbar_writel(void *opaque, hwaddr offset, + uint32_t value) +{ + m5206_mbar_state *s = (m5206_mbar_state *)opaque; + int width; + offset &= 0x3ff; + if (offset >= 0x200) { + hw_error("Bad MBAR write offset 0x%x", (int)offset); + } + width = m5206_mbar_width[offset >> 2]; + if (width < 4) { + m5206_mbar_writew(opaque, offset, value >> 16); + m5206_mbar_writew(opaque, offset + 2, value & 0xffff); + return; + } + m5206_mbar_write(s, offset, value, 4); +} + +static const MemoryRegionOps m5206_mbar_ops = { + .old_mmio = { + .read = { + m5206_mbar_readb, + m5206_mbar_readw, + m5206_mbar_readl, + }, + .write = { + m5206_mbar_writeb, + m5206_mbar_writew, + m5206_mbar_writel, + }, + }, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +qemu_irq *mcf5206_init(MemoryRegion *sysmem, uint32_t base, M68kCPU *cpu) +{ + m5206_mbar_state *s; + qemu_irq *pic; + + s = (m5206_mbar_state *)g_malloc0(sizeof(m5206_mbar_state)); + + memory_region_init_io(&s->iomem, NULL, &m5206_mbar_ops, s, + "mbar", 0x00001000); + memory_region_add_subregion(sysmem, base, &s->iomem); + + pic = qemu_allocate_irqs(m5206_mbar_set_irq, s, 14); + s->timer[0] = m5206_timer_init(pic[9]); + s->timer[1] = m5206_timer_init(pic[10]); + s->uart[0] = mcf_uart_init(pic[12], serial_hds[0]); + s->uart[1] = mcf_uart_init(pic[13], serial_hds[1]); + s->cpu = cpu; + + m5206_mbar_reset(s); + return pic; +} |