Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 548 insertions, 0 deletions

diff --git a/qemu/hw/m68k/mcf5206.c b/qemu/hw/m68k/mcf5206.c
new file mode 100644
index 000000000..1727a4685
--- /dev/null
+++ b/qemu/hw/m68k/mcf5206.c
@@ -0,0 +1,548 @@
+/*
+ * Motorola ColdFire MCF5206 SoC embedded peripheral emulation.
+ *
+ * Copyright (c) 2007 CodeSourcery.
+ *
+ * This code is licensed under the GPL
+ */
+#include "hw/hw.h"
+#include "hw/m68k/mcf.h"
+#include "qemu/timer.h"
+#include "hw/ptimer.h"
+#include "sysemu/sysemu.h"
+#include "exec/address-spaces.h"
+
+/* General purpose timer module.  */
+typedef struct {
+    uint16_t tmr;
+    uint16_t trr;
+    uint16_t tcr;
+    uint16_t ter;
+    ptimer_state *timer;
+    qemu_irq irq;
+    int irq_state;
+} m5206_timer_state;
+
+#define TMR_RST 0x01
+#define TMR_CLK 0x06
+#define TMR_FRR 0x08
+#define TMR_ORI 0x10
+#define TMR_OM  0x20
+#define TMR_CE  0xc0
+
+#define TER_CAP 0x01
+#define TER_REF 0x02
+
+static void m5206_timer_update(m5206_timer_state *s)
+{
+    if ((s->tmr & TMR_ORI) != 0 && (s->ter & TER_REF))
+        qemu_irq_raise(s->irq);
+    else
+        qemu_irq_lower(s->irq);
+}
+
+static void m5206_timer_reset(m5206_timer_state *s)
+{
+    s->tmr = 0;
+    s->trr = 0;
+}
+
+static void m5206_timer_recalibrate(m5206_timer_state *s)
+{
+    int prescale;
+    int mode;
+
+    ptimer_stop(s->timer);
+
+    if ((s->tmr & TMR_RST) == 0)
+        return;
+
+    prescale = (s->tmr >> 8) + 1;
+    mode = (s->tmr >> 1) & 3;
+    if (mode == 2)
+        prescale *= 16;
+
+    if (mode == 3 || mode == 0)
+        hw_error("m5206_timer: mode %d not implemented\n", mode);
+    if ((s->tmr & TMR_FRR) == 0)
+        hw_error("m5206_timer: free running mode not implemented\n");
+
+    /* Assume 66MHz system clock.  */
+    ptimer_set_freq(s->timer, 66000000 / prescale);
+
+    ptimer_set_limit(s->timer, s->trr, 0);
+
+    ptimer_run(s->timer, 0);
+}
+
+static void m5206_timer_trigger(void *opaque)
+{
+    m5206_timer_state *s = (m5206_timer_state *)opaque;
+    s->ter |= TER_REF;
+    m5206_timer_update(s);
+}
+
+static uint32_t m5206_timer_read(m5206_timer_state *s, uint32_t addr)
+{
+    switch (addr) {
+    case 0:
+        return s->tmr;
+    case 4:
+        return s->trr;
+    case 8:
+        return s->tcr;
+    case 0xc:
+        return s->trr - ptimer_get_count(s->timer);
+    case 0x11:
+        return s->ter;
+    default:
+        return 0;
+    }
+}
+
+static void m5206_timer_write(m5206_timer_state *s, uint32_t addr, uint32_t val)
+{
+    switch (addr) {
+    case 0:
+        if ((s->tmr & TMR_RST) != 0 && (val & TMR_RST) == 0) {
+            m5206_timer_reset(s);
+        }
+        s->tmr = val;
+        m5206_timer_recalibrate(s);
+        break;
+    case 4:
+        s->trr = val;
+        m5206_timer_recalibrate(s);
+        break;
+    case 8:
+        s->tcr = val;
+        break;
+    case 0xc:
+        ptimer_set_count(s->timer, val);
+        break;
+    case 0x11:
+        s->ter &= ~val;
+        break;
+    default:
+        break;
+    }
+    m5206_timer_update(s);
+}
+
+static m5206_timer_state *m5206_timer_init(qemu_irq irq)
+{
+    m5206_timer_state *s;
+    QEMUBH *bh;
+
+    s = (m5206_timer_state *)g_malloc0(sizeof(m5206_timer_state));
+    bh = qemu_bh_new(m5206_timer_trigger, s);
+    s->timer = ptimer_init(bh);
+    s->irq = irq;
+    m5206_timer_reset(s);
+    return s;
+}
+
+/* System Integration Module.  */
+
+typedef struct {
+    M68kCPU *cpu;
+    MemoryRegion iomem;
+    m5206_timer_state *timer[2];
+    void *uart[2];
+    uint8_t scr;
+    uint8_t icr[14];
+    uint16_t imr; /* 1 == interrupt is masked.  */
+    uint16_t ipr;
+    uint8_t rsr;
+    uint8_t swivr;
+    uint8_t par;
+    /* Include the UART vector registers here.  */
+    uint8_t uivr[2];
+} m5206_mbar_state;
+
+/* Interrupt controller.  */
+
+static int m5206_find_pending_irq(m5206_mbar_state *s)
+{
+    int level;
+    int vector;
+    uint16_t active;
+    int i;
+
+    level = 0;
+    vector = 0;
+    active = s->ipr & ~s->imr;
+    if (!active)
+        return 0;
+
+    for (i = 1; i < 14; i++) {
+        if (active & (1 << i)) {
+            if ((s->icr[i] & 0x1f) > level) {
+                level = s->icr[i] & 0x1f;
+                vector = i;
+            }
+        }
+    }
+
+    if (level < 4)
+        vector = 0;
+
+    return vector;
+}
+
+static void m5206_mbar_update(m5206_mbar_state *s)
+{
+    int irq;
+    int vector;
+    int level;
+
+    irq = m5206_find_pending_irq(s);
+    if (irq) {
+        int tmp;
+        tmp = s->icr[irq];
+        level = (tmp >> 2) & 7;
+        if (tmp & 0x80) {
+            /* Autovector.  */
+            vector = 24 + level;
+        } else {
+            switch (irq) {
+            case 8: /* SWT */
+                vector = s->swivr;
+                break;
+            case 12: /* UART1 */
+                vector = s->uivr[0];
+                break;
+            case 13: /* UART2 */
+                vector = s->uivr[1];
+                break;
+            default:
+                /* Unknown vector.  */
+                fprintf(stderr, "Unhandled vector for IRQ %d\n", irq);
+                vector = 0xf;
+                break;
+            }
+        }
+    } else {
+        level = 0;
+        vector = 0;
+    }
+    m68k_set_irq_level(s->cpu, level, vector);
+}
+
+static void m5206_mbar_set_irq(void *opaque, int irq, int level)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    if (level) {
+        s->ipr |= 1 << irq;
+    } else {
+        s->ipr &= ~(1 << irq);
+    }
+    m5206_mbar_update(s);
+}
+
+/* System Integration Module.  */
+
+static void m5206_mbar_reset(m5206_mbar_state *s)
+{
+    s->scr = 0xc0;
+    s->icr[1] = 0x04;
+    s->icr[2] = 0x08;
+    s->icr[3] = 0x0c;
+    s->icr[4] = 0x10;
+    s->icr[5] = 0x14;
+    s->icr[6] = 0x18;
+    s->icr[7] = 0x1c;
+    s->icr[8] = 0x1c;
+    s->icr[9] = 0x80;
+    s->icr[10] = 0x80;
+    s->icr[11] = 0x80;
+    s->icr[12] = 0x00;
+    s->icr[13] = 0x00;
+    s->imr = 0x3ffe;
+    s->rsr = 0x80;
+    s->swivr = 0x0f;
+    s->par = 0;
+}
+
+static uint64_t m5206_mbar_read(m5206_mbar_state *s,
+                                uint64_t offset, unsigned size)
+{
+    if (offset >= 0x100 && offset < 0x120) {
+        return m5206_timer_read(s->timer[0], offset - 0x100);
+    } else if (offset >= 0x120 && offset < 0x140) {
+        return m5206_timer_read(s->timer[1], offset - 0x120);
+    } else if (offset >= 0x140 && offset < 0x160) {
+        return mcf_uart_read(s->uart[0], offset - 0x140, size);
+    } else if (offset >= 0x180 && offset < 0x1a0) {
+        return mcf_uart_read(s->uart[1], offset - 0x180, size);
+    }
+    switch (offset) {
+    case 0x03: return s->scr;
+    case 0x14 ... 0x20: return s->icr[offset - 0x13];
+    case 0x36: return s->imr;
+    case 0x3a: return s->ipr;
+    case 0x40: return s->rsr;
+    case 0x41: return 0;
+    case 0x42: return s->swivr;
+    case 0x50:
+        /* DRAM mask register.  */
+        /* FIXME: currently hardcoded to 128Mb.  */
+        {
+            uint32_t mask = ~0;
+            while (mask > ram_size)
+                mask >>= 1;
+            return mask & 0x0ffe0000;
+        }
+    case 0x5c: return 1; /* DRAM bank 1 empty.  */
+    case 0xcb: return s->par;
+    case 0x170: return s->uivr[0];
+    case 0x1b0: return s->uivr[1];
+    }
+    hw_error("Bad MBAR read offset 0x%x", (int)offset);
+    return 0;
+}
+
+static void m5206_mbar_write(m5206_mbar_state *s, uint32_t offset,
+                             uint64_t value, unsigned size)
+{
+    if (offset >= 0x100 && offset < 0x120) {
+        m5206_timer_write(s->timer[0], offset - 0x100, value);
+        return;
+    } else if (offset >= 0x120 && offset < 0x140) {
+        m5206_timer_write(s->timer[1], offset - 0x120, value);
+        return;
+    } else if (offset >= 0x140 && offset < 0x160) {
+        mcf_uart_write(s->uart[0], offset - 0x140, value, size);
+        return;
+    } else if (offset >= 0x180 && offset < 0x1a0) {
+        mcf_uart_write(s->uart[1], offset - 0x180, value, size);
+        return;
+    }
+    switch (offset) {
+    case 0x03:
+        s->scr = value;
+        break;
+    case 0x14 ... 0x20:
+        s->icr[offset - 0x13] = value;
+        m5206_mbar_update(s);
+        break;
+    case 0x36:
+        s->imr = value;
+        m5206_mbar_update(s);
+        break;
+    case 0x40:
+        s->rsr &= ~value;
+        break;
+    case 0x41:
+        /* TODO: implement watchdog.  */
+        break;
+    case 0x42:
+        s->swivr = value;
+        break;
+    case 0xcb:
+        s->par = value;
+        break;
+    case 0x170:
+        s->uivr[0] = value;
+        break;
+    case 0x178: case 0x17c: case 0x1c8: case 0x1bc:
+        /* Not implemented: UART Output port bits.  */
+        break;
+    case 0x1b0:
+        s->uivr[1] = value;
+        break;
+    default:
+        hw_error("Bad MBAR write offset 0x%x", (int)offset);
+        break;
+    }
+}
+
+/* Internal peripherals use a variety of register widths.
+   This lookup table allows a single routine to handle all of them.  */
+static const uint8_t m5206_mbar_width[] =
+{
+  /* 000-040 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  2, 2, 2, 2,
+  /* 040-080 */ 1, 2, 2, 2,  4, 1, 2, 4,  1, 2, 4, 2,  2, 4, 2, 2,
+  /* 080-0c0 */ 4, 2, 2, 4,  2, 2, 4, 2,  2, 4, 2, 2,  4, 2, 2, 4,
+  /* 0c0-100 */ 2, 2, 1, 0,  0, 0, 0, 0,  0, 0, 0, 0,  0, 0, 0, 0,
+  /* 100-140 */ 2, 2, 2, 2,  1, 0, 0, 0,  2, 2, 2, 2,  1, 0, 0, 0,
+  /* 140-180 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
+  /* 180-1c0 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
+  /* 1c0-200 */ 1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,  1, 1, 1, 1,
+};
+
+static uint32_t m5206_mbar_readw(void *opaque, hwaddr offset);
+static uint32_t m5206_mbar_readl(void *opaque, hwaddr offset);
+
+static uint32_t m5206_mbar_readb(void *opaque, hwaddr offset)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR read offset 0x%x", (int)offset);
+    }
+    if (m5206_mbar_width[offset >> 2] > 1) {
+        uint16_t val;
+        val = m5206_mbar_readw(opaque, offset & ~1);
+        if ((offset & 1) == 0) {
+            val >>= 8;
+        }
+        return val & 0xff;
+    }
+    return m5206_mbar_read(s, offset, 1);
+}
+
+static uint32_t m5206_mbar_readw(void *opaque, hwaddr offset)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    int width;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR read offset 0x%x", (int)offset);
+    }
+    width = m5206_mbar_width[offset >> 2];
+    if (width > 2) {
+        uint32_t val;
+        val = m5206_mbar_readl(opaque, offset & ~3);
+        if ((offset & 3) == 0)
+            val >>= 16;
+        return val & 0xffff;
+    } else if (width < 2) {
+        uint16_t val;
+        val = m5206_mbar_readb(opaque, offset) << 8;
+        val |= m5206_mbar_readb(opaque, offset + 1);
+        return val;
+    }
+    return m5206_mbar_read(s, offset, 2);
+}
+
+static uint32_t m5206_mbar_readl(void *opaque, hwaddr offset)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    int width;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR read offset 0x%x", (int)offset);
+    }
+    width = m5206_mbar_width[offset >> 2];
+    if (width < 4) {
+        uint32_t val;
+        val = m5206_mbar_readw(opaque, offset) << 16;
+        val |= m5206_mbar_readw(opaque, offset + 2);
+        return val;
+    }
+    return m5206_mbar_read(s, offset, 4);
+}
+
+static void m5206_mbar_writew(void *opaque, hwaddr offset,
+                              uint32_t value);
+static void m5206_mbar_writel(void *opaque, hwaddr offset,
+                              uint32_t value);
+
+static void m5206_mbar_writeb(void *opaque, hwaddr offset,
+                              uint32_t value)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    int width;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR write offset 0x%x", (int)offset);
+    }
+    width = m5206_mbar_width[offset >> 2];
+    if (width > 1) {
+        uint32_t tmp;
+        tmp = m5206_mbar_readw(opaque, offset & ~1);
+        if (offset & 1) {
+            tmp = (tmp & 0xff00) | value;
+        } else {
+            tmp = (tmp & 0x00ff) | (value << 8);
+        }
+        m5206_mbar_writew(opaque, offset & ~1, tmp);
+        return;
+    }
+    m5206_mbar_write(s, offset, value, 1);
+}
+
+static void m5206_mbar_writew(void *opaque, hwaddr offset,
+                              uint32_t value)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    int width;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR write offset 0x%x", (int)offset);
+    }
+    width = m5206_mbar_width[offset >> 2];
+    if (width > 2) {
+        uint32_t tmp;
+        tmp = m5206_mbar_readl(opaque, offset & ~3);
+        if (offset & 3) {
+            tmp = (tmp & 0xffff0000) | value;
+        } else {
+            tmp = (tmp & 0x0000ffff) | (value << 16);
+        }
+        m5206_mbar_writel(opaque, offset & ~3, tmp);
+        return;
+    } else if (width < 2) {
+        m5206_mbar_writeb(opaque, offset, value >> 8);
+        m5206_mbar_writeb(opaque, offset + 1, value & 0xff);
+        return;
+    }
+    m5206_mbar_write(s, offset, value, 2);
+}
+
+static void m5206_mbar_writel(void *opaque, hwaddr offset,
+                              uint32_t value)
+{
+    m5206_mbar_state *s = (m5206_mbar_state *)opaque;
+    int width;
+    offset &= 0x3ff;
+    if (offset >= 0x200) {
+        hw_error("Bad MBAR write offset 0x%x", (int)offset);
+    }
+    width = m5206_mbar_width[offset >> 2];
+    if (width < 4) {
+        m5206_mbar_writew(opaque, offset, value >> 16);
+        m5206_mbar_writew(opaque, offset + 2, value & 0xffff);
+        return;
+    }
+    m5206_mbar_write(s, offset, value, 4);
+}
+
+static const MemoryRegionOps m5206_mbar_ops = {
+    .old_mmio = {
+        .read = {
+            m5206_mbar_readb,
+            m5206_mbar_readw,
+            m5206_mbar_readl,
+        },
+        .write = {
+            m5206_mbar_writeb,
+            m5206_mbar_writew,
+            m5206_mbar_writel,
+        },
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+qemu_irq *mcf5206_init(MemoryRegion *sysmem, uint32_t base, M68kCPU *cpu)
+{
+    m5206_mbar_state *s;
+    qemu_irq *pic;
+
+    s = (m5206_mbar_state *)g_malloc0(sizeof(m5206_mbar_state));
+
+    memory_region_init_io(&s->iomem, NULL, &m5206_mbar_ops, s,
+                          "mbar", 0x00001000);
+    memory_region_add_subregion(sysmem, base, &s->iomem);
+
+    pic = qemu_allocate_irqs(m5206_mbar_set_irq, s, 14);
+    s->timer[0] = m5206_timer_init(pic[9]);
+    s->timer[1] = m5206_timer_init(pic[10]);
+    s->uart[0] = mcf_uart_init(pic[12], serial_hds[0]);
+    s->uart[1] = mcf_uart_init(pic[13], serial_hds[1]);
+    s->cpu = cpu;
+
+    m5206_mbar_reset(s);
+    return pic;
+}