diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/input/lm832x.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/input/lm832x.c')
-rw-r--r-- | qemu/hw/input/lm832x.c | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/qemu/hw/input/lm832x.c b/qemu/hw/input/lm832x.c new file mode 100644 index 000000000..530a6e01f --- /dev/null +++ b/qemu/hw/input/lm832x.c @@ -0,0 +1,524 @@ +/* + * National Semiconductor LM8322/8323 GPIO keyboard & PWM chips. + * + * Copyright (C) 2008 Nokia Corporation + * Written by Andrzej Zaborowski <andrew@openedhand.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "hw/hw.h" +#include "hw/i2c/i2c.h" +#include "qemu/timer.h" +#include "ui/console.h" + +#define TYPE_LM8323 "lm8323" +#define LM8323(obj) OBJECT_CHECK(LM823KbdState, (obj), TYPE_LM8323) + +typedef struct { + I2CSlave parent_obj; + + uint8_t i2c_dir; + uint8_t i2c_cycle; + uint8_t reg; + + qemu_irq nirq; + uint16_t model; + + struct { + qemu_irq out[2]; + int in[2][2]; + } mux; + + uint8_t config; + uint8_t status; + uint8_t acttime; + uint8_t error; + uint8_t clock; + + struct { + uint16_t pull; + uint16_t mask; + uint16_t dir; + uint16_t level; + qemu_irq out[16]; + } gpio; + + struct { + uint8_t dbnctime; + uint8_t size; + uint8_t start; + uint8_t len; + uint8_t fifo[16]; + } kbd; + + struct { + uint16_t file[256]; + uint8_t faddr; + uint8_t addr[3]; + QEMUTimer *tm[3]; + } pwm; +} LM823KbdState; + +#define INT_KEYPAD (1 << 0) +#define INT_ERROR (1 << 3) +#define INT_NOINIT (1 << 4) +#define INT_PWMEND(n) (1 << (5 + n)) + +#define ERR_BADPAR (1 << 0) +#define ERR_CMDUNK (1 << 1) +#define ERR_KEYOVR (1 << 2) +#define ERR_FIFOOVR (1 << 6) + +static void lm_kbd_irq_update(LM823KbdState *s) +{ + qemu_set_irq(s->nirq, !s->status); +} + +static void lm_kbd_gpio_update(LM823KbdState *s) +{ +} + +static void lm_kbd_reset(LM823KbdState *s) +{ + s->config = 0x80; + s->status = INT_NOINIT; + s->acttime = 125; + s->kbd.dbnctime = 3; + s->kbd.size = 0x33; + s->clock = 0x08; + + lm_kbd_irq_update(s); + lm_kbd_gpio_update(s); +} + +static void lm_kbd_error(LM823KbdState *s, int err) +{ + s->error |= err; + s->status |= INT_ERROR; + lm_kbd_irq_update(s); +} + +static void lm_kbd_pwm_tick(LM823KbdState *s, int line) +{ +} + +static void lm_kbd_pwm_start(LM823KbdState *s, int line) +{ + lm_kbd_pwm_tick(s, line); +} + +static void lm_kbd_pwm0_tick(void *opaque) +{ + lm_kbd_pwm_tick(opaque, 0); +} +static void lm_kbd_pwm1_tick(void *opaque) +{ + lm_kbd_pwm_tick(opaque, 1); +} +static void lm_kbd_pwm2_tick(void *opaque) +{ + lm_kbd_pwm_tick(opaque, 2); +} + +enum { + LM832x_CMD_READ_ID = 0x80, /* Read chip ID. */ + LM832x_CMD_WRITE_CFG = 0x81, /* Set configuration item. */ + LM832x_CMD_READ_INT = 0x82, /* Get interrupt status. */ + LM832x_CMD_RESET = 0x83, /* Reset, same as external one */ + LM823x_CMD_WRITE_PULL_DOWN = 0x84, /* Select GPIO pull-up/down. */ + LM832x_CMD_WRITE_PORT_SEL = 0x85, /* Select GPIO in/out. */ + LM832x_CMD_WRITE_PORT_STATE = 0x86, /* Set GPIO pull-up/down. */ + LM832x_CMD_READ_PORT_SEL = 0x87, /* Get GPIO in/out. */ + LM832x_CMD_READ_PORT_STATE = 0x88, /* Get GPIO pull-up/down. */ + LM832x_CMD_READ_FIFO = 0x89, /* Read byte from FIFO. */ + LM832x_CMD_RPT_READ_FIFO = 0x8a, /* Read FIFO (no increment). */ + LM832x_CMD_SET_ACTIVE = 0x8b, /* Set active time. */ + LM832x_CMD_READ_ERROR = 0x8c, /* Get error status. */ + LM832x_CMD_READ_ROTATOR = 0x8e, /* Read rotator status. */ + LM832x_CMD_SET_DEBOUNCE = 0x8f, /* Set debouncing time. */ + LM832x_CMD_SET_KEY_SIZE = 0x90, /* Set keypad size. */ + LM832x_CMD_READ_KEY_SIZE = 0x91, /* Get keypad size. */ + LM832x_CMD_READ_CFG = 0x92, /* Get configuration item. */ + LM832x_CMD_WRITE_CLOCK = 0x93, /* Set clock config. */ + LM832x_CMD_READ_CLOCK = 0x94, /* Get clock config. */ + LM832x_CMD_PWM_WRITE = 0x95, /* Write PWM script. */ + LM832x_CMD_PWM_START = 0x96, /* Start PWM engine. */ + LM832x_CMD_PWM_STOP = 0x97, /* Stop PWM engine. */ + LM832x_GENERAL_ERROR = 0xff, /* There was one error. + Previously was represented by -1 + This is not a command */ +}; + +#define LM832x_MAX_KPX 8 +#define LM832x_MAX_KPY 12 + +static uint8_t lm_kbd_read(LM823KbdState *s, int reg, int byte) +{ + int ret; + + switch (reg) { + case LM832x_CMD_READ_ID: + ret = 0x0400; + break; + + case LM832x_CMD_READ_INT: + ret = s->status; + if (!(s->status & INT_NOINIT)) { + s->status = 0; + lm_kbd_irq_update(s); + } + break; + + case LM832x_CMD_READ_PORT_SEL: + ret = s->gpio.dir; + break; + case LM832x_CMD_READ_PORT_STATE: + ret = s->gpio.mask; + break; + + case LM832x_CMD_READ_FIFO: + if (s->kbd.len <= 1) + return 0x00; + + /* Example response from the two commands after a INT_KEYPAD + * interrupt caused by the key 0x3c being pressed: + * RPT_READ_FIFO: 55 bc 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01 + * READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01 + * RPT_READ_FIFO: bc 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 01 + * + * 55 is the code of the key release event serviced in the previous + * interrupt handling. + * + * TODO: find out whether the FIFO is advanced a single character + * before reading every byte or the whole size of the FIFO at the + * last LM832x_CMD_READ_FIFO. This affects LM832x_CMD_RPT_READ_FIFO + * output in cases where there are more than one event in the FIFO. + * Assume 0xbc and 0x3c events are in the FIFO: + * RPT_READ_FIFO: 55 bc 3c 00 4e ff 0a 50 08 00 29 d9 08 01 c9 + * READ_FIFO: bc 3c 00 00 4e ff 0a 50 08 00 29 d9 08 01 c9 + * Does RPT_READ_FIFO now return 0xbc and 0x3c or only 0x3c? + */ + s->kbd.start ++; + s->kbd.start &= sizeof(s->kbd.fifo) - 1; + s->kbd.len --; + + return s->kbd.fifo[s->kbd.start]; + case LM832x_CMD_RPT_READ_FIFO: + if (byte >= s->kbd.len) + return 0x00; + + return s->kbd.fifo[(s->kbd.start + byte) & (sizeof(s->kbd.fifo) - 1)]; + + case LM832x_CMD_READ_ERROR: + return s->error; + + case LM832x_CMD_READ_ROTATOR: + return 0; + + case LM832x_CMD_READ_KEY_SIZE: + return s->kbd.size; + + case LM832x_CMD_READ_CFG: + return s->config & 0xf; + + case LM832x_CMD_READ_CLOCK: + return (s->clock & 0xfc) | 2; + + default: + lm_kbd_error(s, ERR_CMDUNK); + fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg); + return 0x00; + } + + return ret >> (byte << 3); +} + +static void lm_kbd_write(LM823KbdState *s, int reg, int byte, uint8_t value) +{ + switch (reg) { + case LM832x_CMD_WRITE_CFG: + s->config = value; + /* This must be done whenever s->mux.in is updated (never). */ + if ((s->config >> 1) & 1) /* MUX1EN */ + qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 0) & 1]); + if ((s->config >> 3) & 1) /* MUX2EN */ + qemu_set_irq(s->mux.out[0], s->mux.in[0][(s->config >> 2) & 1]); + /* TODO: check that this is issued only following the chip reset + * and not in the middle of operation and that it is followed by + * the GPIO ports re-resablishing through WRITE_PORT_SEL and + * WRITE_PORT_STATE (using a timer perhaps) and otherwise output + * warnings. */ + s->status = 0; + lm_kbd_irq_update(s); + s->kbd.len = 0; + s->kbd.start = 0; + s->reg = LM832x_GENERAL_ERROR; + break; + + case LM832x_CMD_RESET: + if (value == 0xaa) + lm_kbd_reset(s); + else + lm_kbd_error(s, ERR_BADPAR); + s->reg = LM832x_GENERAL_ERROR; + break; + + case LM823x_CMD_WRITE_PULL_DOWN: + if (!byte) + s->gpio.pull = value; + else { + s->gpio.pull |= value << 8; + lm_kbd_gpio_update(s); + s->reg = LM832x_GENERAL_ERROR; + } + break; + case LM832x_CMD_WRITE_PORT_SEL: + if (!byte) + s->gpio.dir = value; + else { + s->gpio.dir |= value << 8; + lm_kbd_gpio_update(s); + s->reg = LM832x_GENERAL_ERROR; + } + break; + case LM832x_CMD_WRITE_PORT_STATE: + if (!byte) + s->gpio.mask = value; + else { + s->gpio.mask |= value << 8; + lm_kbd_gpio_update(s); + s->reg = LM832x_GENERAL_ERROR; + } + break; + + case LM832x_CMD_SET_ACTIVE: + s->acttime = value; + s->reg = LM832x_GENERAL_ERROR; + break; + + case LM832x_CMD_SET_DEBOUNCE: + s->kbd.dbnctime = value; + s->reg = LM832x_GENERAL_ERROR; + if (!value) + lm_kbd_error(s, ERR_BADPAR); + break; + + case LM832x_CMD_SET_KEY_SIZE: + s->kbd.size = value; + s->reg = LM832x_GENERAL_ERROR; + if ( + (value & 0xf) < 3 || (value & 0xf) > LM832x_MAX_KPY || + (value >> 4) < 3 || (value >> 4) > LM832x_MAX_KPX) + lm_kbd_error(s, ERR_BADPAR); + break; + + case LM832x_CMD_WRITE_CLOCK: + s->clock = value; + s->reg = LM832x_GENERAL_ERROR; + if ((value & 3) && (value & 3) != 3) { + lm_kbd_error(s, ERR_BADPAR); + fprintf(stderr, "%s: invalid clock setting in RCPWM\n", + __FUNCTION__); + } + /* TODO: Validate that the command is only issued once */ + break; + + case LM832x_CMD_PWM_WRITE: + if (byte == 0) { + if (!(value & 3) || (value >> 2) > 59) { + lm_kbd_error(s, ERR_BADPAR); + s->reg = LM832x_GENERAL_ERROR; + break; + } + + s->pwm.faddr = value; + s->pwm.file[s->pwm.faddr] = 0; + } else if (byte == 1) { + s->pwm.file[s->pwm.faddr] |= value << 8; + } else if (byte == 2) { + s->pwm.file[s->pwm.faddr] |= value << 0; + s->reg = LM832x_GENERAL_ERROR; + } + break; + case LM832x_CMD_PWM_START: + s->reg = LM832x_GENERAL_ERROR; + if (!(value & 3) || (value >> 2) > 59) { + lm_kbd_error(s, ERR_BADPAR); + break; + } + + s->pwm.addr[(value & 3) - 1] = value >> 2; + lm_kbd_pwm_start(s, (value & 3) - 1); + break; + case LM832x_CMD_PWM_STOP: + s->reg = LM832x_GENERAL_ERROR; + if (!(value & 3)) { + lm_kbd_error(s, ERR_BADPAR); + break; + } + + timer_del(s->pwm.tm[(value & 3) - 1]); + break; + + case LM832x_GENERAL_ERROR: + lm_kbd_error(s, ERR_BADPAR); + break; + default: + lm_kbd_error(s, ERR_CMDUNK); + fprintf(stderr, "%s: unknown command %02x\n", __FUNCTION__, reg); + break; + } +} + +static void lm_i2c_event(I2CSlave *i2c, enum i2c_event event) +{ + LM823KbdState *s = LM8323(i2c); + + switch (event) { + case I2C_START_RECV: + case I2C_START_SEND: + s->i2c_cycle = 0; + s->i2c_dir = (event == I2C_START_SEND); + break; + + default: + break; + } +} + +static int lm_i2c_rx(I2CSlave *i2c) +{ + LM823KbdState *s = LM8323(i2c); + + return lm_kbd_read(s, s->reg, s->i2c_cycle ++); +} + +static int lm_i2c_tx(I2CSlave *i2c, uint8_t data) +{ + LM823KbdState *s = LM8323(i2c); + + if (!s->i2c_cycle) + s->reg = data; + else + lm_kbd_write(s, s->reg, s->i2c_cycle - 1, data); + s->i2c_cycle ++; + + return 0; +} + +static int lm_kbd_post_load(void *opaque, int version_id) +{ + LM823KbdState *s = opaque; + + lm_kbd_irq_update(s); + lm_kbd_gpio_update(s); + + return 0; +} + +static const VMStateDescription vmstate_lm_kbd = { + .name = "LM8323", + .version_id = 0, + .minimum_version_id = 0, + .post_load = lm_kbd_post_load, + .fields = (VMStateField[]) { + VMSTATE_I2C_SLAVE(parent_obj, LM823KbdState), + VMSTATE_UINT8(i2c_dir, LM823KbdState), + VMSTATE_UINT8(i2c_cycle, LM823KbdState), + VMSTATE_UINT8(reg, LM823KbdState), + VMSTATE_UINT8(config, LM823KbdState), + VMSTATE_UINT8(status, LM823KbdState), + VMSTATE_UINT8(acttime, LM823KbdState), + VMSTATE_UINT8(error, LM823KbdState), + VMSTATE_UINT8(clock, LM823KbdState), + VMSTATE_UINT16(gpio.pull, LM823KbdState), + VMSTATE_UINT16(gpio.mask, LM823KbdState), + VMSTATE_UINT16(gpio.dir, LM823KbdState), + VMSTATE_UINT16(gpio.level, LM823KbdState), + VMSTATE_UINT8(kbd.dbnctime, LM823KbdState), + VMSTATE_UINT8(kbd.size, LM823KbdState), + VMSTATE_UINT8(kbd.start, LM823KbdState), + VMSTATE_UINT8(kbd.len, LM823KbdState), + VMSTATE_BUFFER(kbd.fifo, LM823KbdState), + VMSTATE_UINT16_ARRAY(pwm.file, LM823KbdState, 256), + VMSTATE_UINT8(pwm.faddr, LM823KbdState), + VMSTATE_BUFFER(pwm.addr, LM823KbdState), + VMSTATE_TIMER_PTR_ARRAY(pwm.tm, LM823KbdState, 3), + VMSTATE_END_OF_LIST() + } +}; + + +static int lm8323_init(I2CSlave *i2c) +{ + LM823KbdState *s = LM8323(i2c); + + s->model = 0x8323; + s->pwm.tm[0] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm0_tick, s); + s->pwm.tm[1] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm1_tick, s); + s->pwm.tm[2] = timer_new_ns(QEMU_CLOCK_VIRTUAL, lm_kbd_pwm2_tick, s); + qdev_init_gpio_out(DEVICE(i2c), &s->nirq, 1); + + lm_kbd_reset(s); + + qemu_register_reset((void *) lm_kbd_reset, s); + return 0; +} + +void lm832x_key_event(DeviceState *dev, int key, int state) +{ + LM823KbdState *s = LM8323(dev); + + if ((s->status & INT_ERROR) && (s->error & ERR_FIFOOVR)) + return; + + if (s->kbd.len >= sizeof(s->kbd.fifo)) { + lm_kbd_error(s, ERR_FIFOOVR); + return; + } + + s->kbd.fifo[(s->kbd.start + s->kbd.len ++) & (sizeof(s->kbd.fifo) - 1)] = + key | (state << 7); + + /* We never set ERR_KEYOVR because we support multiple keys fine. */ + s->status |= INT_KEYPAD; + lm_kbd_irq_update(s); +} + +static void lm8323_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->init = lm8323_init; + k->event = lm_i2c_event; + k->recv = lm_i2c_rx; + k->send = lm_i2c_tx; + dc->vmsd = &vmstate_lm_kbd; +} + +static const TypeInfo lm8323_info = { + .name = TYPE_LM8323, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(LM823KbdState), + .class_init = lm8323_class_init, +}; + +static void lm832x_register_types(void) +{ + type_register_static(&lm8323_info); +} + +type_init(lm832x_register_types) |