diff options
author | 2015-08-28 09:58:54 +0800 | |
---|---|---|
committer | 2015-09-01 12:44:00 +0800 | |
commit | e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb (patch) | |
tree | 66b09f592c55df2878107a468a91d21506104d3f /qemu/hw/ide/pci.c | |
parent | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (diff) |
Add qemu 2.4.0
Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Diffstat (limited to 'qemu/hw/ide/pci.c')
-rw-r--r-- | qemu/hw/ide/pci.c | 485 |
1 files changed, 485 insertions, 0 deletions
diff --git a/qemu/hw/ide/pci.c b/qemu/hw/ide/pci.c new file mode 100644 index 000000000..d31ff885b --- /dev/null +++ b/qemu/hw/ide/pci.c @@ -0,0 +1,485 @@ +/* + * QEMU IDE Emulation: PCI Bus support. + * + * Copyright (c) 2003 Fabrice Bellard + * Copyright (c) 2006 Openedhand Ltd. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ +#include <hw/hw.h> +#include <hw/i386/pc.h> +#include <hw/pci/pci.h> +#include <hw/isa/isa.h> +#include "sysemu/block-backend.h" +#include "sysemu/dma.h" +#include "qemu/error-report.h" +#include <hw/ide/pci.h> + +#define BMDMA_PAGE_SIZE 4096 + +#define BM_MIGRATION_COMPAT_STATUS_BITS \ + (IDE_RETRY_DMA | IDE_RETRY_PIO | \ + IDE_RETRY_READ | IDE_RETRY_FLUSH) + +static void bmdma_start_dma(IDEDMA *dma, IDEState *s, + BlockCompletionFunc *dma_cb) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + + bm->dma_cb = dma_cb; + bm->cur_prd_last = 0; + bm->cur_prd_addr = 0; + bm->cur_prd_len = 0; + + if (bm->status & BM_STATUS_DMAING) { + bm->dma_cb(bmdma_active_if(bm), 0); + } +} + +/** + * Prepare an sglist based on available PRDs. + * @limit: How many bytes to prepare total. + * + * Returns the number of bytes prepared, -1 on error. + * IDEState.io_buffer_size will contain the number of bytes described + * by the PRDs, whether or not we added them to the sglist. + */ +static int32_t bmdma_prepare_buf(IDEDMA *dma, int32_t limit) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + IDEState *s = bmdma_active_if(bm); + PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); + struct { + uint32_t addr; + uint32_t size; + } prd; + int l, len; + + pci_dma_sglist_init(&s->sg, pci_dev, + s->nsector / (BMDMA_PAGE_SIZE / 512) + 1); + s->io_buffer_size = 0; + for(;;) { + if (bm->cur_prd_len == 0) { + /* end of table (with a fail safe of one page) */ + if (bm->cur_prd_last || + (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) { + return s->sg.size; + } + pci_dma_read(pci_dev, bm->cur_addr, &prd, 8); + bm->cur_addr += 8; + prd.addr = le32_to_cpu(prd.addr); + prd.size = le32_to_cpu(prd.size); + len = prd.size & 0xfffe; + if (len == 0) + len = 0x10000; + bm->cur_prd_len = len; + bm->cur_prd_addr = prd.addr; + bm->cur_prd_last = (prd.size & 0x80000000); + } + l = bm->cur_prd_len; + if (l > 0) { + uint64_t sg_len; + + /* Don't add extra bytes to the SGList; consume any remaining + * PRDs from the guest, but ignore them. */ + sg_len = MIN(limit - s->sg.size, bm->cur_prd_len); + if (sg_len) { + qemu_sglist_add(&s->sg, bm->cur_prd_addr, sg_len); + } + + /* Note: We limit the max transfer to be 2GiB. + * This should accommodate the largest ATA transaction + * for LBA48 (65,536 sectors) and 32K sector sizes. */ + if (s->sg.size > INT32_MAX) { + error_report("IDE: sglist describes more than 2GiB."); + break; + } + bm->cur_prd_addr += l; + bm->cur_prd_len -= l; + s->io_buffer_size += l; + } + } + + qemu_sglist_destroy(&s->sg); + s->io_buffer_size = 0; + return -1; +} + +/* return 0 if buffer completed */ +static int bmdma_rw_buf(IDEDMA *dma, int is_write) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + IDEState *s = bmdma_active_if(bm); + PCIDevice *pci_dev = PCI_DEVICE(bm->pci_dev); + struct { + uint32_t addr; + uint32_t size; + } prd; + int l, len; + + for(;;) { + l = s->io_buffer_size - s->io_buffer_index; + if (l <= 0) + break; + if (bm->cur_prd_len == 0) { + /* end of table (with a fail safe of one page) */ + if (bm->cur_prd_last || + (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) + return 0; + pci_dma_read(pci_dev, bm->cur_addr, &prd, 8); + bm->cur_addr += 8; + prd.addr = le32_to_cpu(prd.addr); + prd.size = le32_to_cpu(prd.size); + len = prd.size & 0xfffe; + if (len == 0) + len = 0x10000; + bm->cur_prd_len = len; + bm->cur_prd_addr = prd.addr; + bm->cur_prd_last = (prd.size & 0x80000000); + } + if (l > bm->cur_prd_len) + l = bm->cur_prd_len; + if (l > 0) { + if (is_write) { + pci_dma_write(pci_dev, bm->cur_prd_addr, + s->io_buffer + s->io_buffer_index, l); + } else { + pci_dma_read(pci_dev, bm->cur_prd_addr, + s->io_buffer + s->io_buffer_index, l); + } + bm->cur_prd_addr += l; + bm->cur_prd_len -= l; + s->io_buffer_index += l; + } + } + return 1; +} + +static void bmdma_set_inactive(IDEDMA *dma, bool more) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + + bm->dma_cb = NULL; + if (more) { + bm->status |= BM_STATUS_DMAING; + } else { + bm->status &= ~BM_STATUS_DMAING; + } +} + +static void bmdma_restart_dma(IDEDMA *dma) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + + bm->cur_addr = bm->addr; +} + +static void bmdma_cancel(BMDMAState *bm) +{ + if (bm->status & BM_STATUS_DMAING) { + /* cancel DMA request */ + bmdma_set_inactive(&bm->dma, false); + } +} + +static void bmdma_reset(IDEDMA *dma) +{ + BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); + +#ifdef DEBUG_IDE + printf("ide: dma_reset\n"); +#endif + bmdma_cancel(bm); + bm->cmd = 0; + bm->status = 0; + bm->addr = 0; + bm->cur_addr = 0; + bm->cur_prd_last = 0; + bm->cur_prd_addr = 0; + bm->cur_prd_len = 0; +} + +static void bmdma_irq(void *opaque, int n, int level) +{ + BMDMAState *bm = opaque; + + if (!level) { + /* pass through lower */ + qemu_set_irq(bm->irq, level); + return; + } + + bm->status |= BM_STATUS_INT; + + /* trigger the real irq */ + qemu_set_irq(bm->irq, level); +} + +void bmdma_cmd_writeb(BMDMAState *bm, uint32_t val) +{ +#ifdef DEBUG_IDE + printf("%s: 0x%08x\n", __func__, val); +#endif + + /* Ignore writes to SSBM if it keeps the old value */ + if ((val & BM_CMD_START) != (bm->cmd & BM_CMD_START)) { + if (!(val & BM_CMD_START)) { + /* + * We can't cancel Scatter Gather DMA in the middle of the + * operation or a partial (not full) DMA transfer would reach + * the storage so we wait for completion instead (we beahve + * like if the DMA was completed by the time the guest trying + * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not + * set). + * + * In the future we'll be able to safely cancel the I/O if the + * whole DMA operation will be submitted to disk with a single + * aio operation with preadv/pwritev. + */ + if (bm->bus->dma->aiocb) { + blk_drain_all(); + assert(bm->bus->dma->aiocb == NULL); + } + bm->status &= ~BM_STATUS_DMAING; + } else { + bm->cur_addr = bm->addr; + if (!(bm->status & BM_STATUS_DMAING)) { + bm->status |= BM_STATUS_DMAING; + /* start dma transfer if possible */ + if (bm->dma_cb) + bm->dma_cb(bmdma_active_if(bm), 0); + } + } + } + + bm->cmd = val & 0x09; +} + +static uint64_t bmdma_addr_read(void *opaque, hwaddr addr, + unsigned width) +{ + BMDMAState *bm = opaque; + uint32_t mask = (1ULL << (width * 8)) - 1; + uint64_t data; + + data = (bm->addr >> (addr * 8)) & mask; +#ifdef DEBUG_IDE + printf("%s: 0x%08x\n", __func__, (unsigned)data); +#endif + return data; +} + +static void bmdma_addr_write(void *opaque, hwaddr addr, + uint64_t data, unsigned width) +{ + BMDMAState *bm = opaque; + int shift = addr * 8; + uint32_t mask = (1ULL << (width * 8)) - 1; + +#ifdef DEBUG_IDE + printf("%s: 0x%08x\n", __func__, (unsigned)data); +#endif + bm->addr &= ~(mask << shift); + bm->addr |= ((data & mask) << shift) & ~3; +} + +MemoryRegionOps bmdma_addr_ioport_ops = { + .read = bmdma_addr_read, + .write = bmdma_addr_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +static bool ide_bmdma_current_needed(void *opaque) +{ + BMDMAState *bm = opaque; + + return (bm->cur_prd_len != 0); +} + +static bool ide_bmdma_status_needed(void *opaque) +{ + BMDMAState *bm = opaque; + + /* Older versions abused some bits in the status register for internal + * error state. If any of these bits are set, we must add a subsection to + * transfer the real status register */ + uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; + + return ((bm->status & abused_bits) != 0); +} + +static void ide_bmdma_pre_save(void *opaque) +{ + BMDMAState *bm = opaque; + uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; + + bm->migration_retry_unit = bm->bus->retry_unit; + bm->migration_retry_sector_num = bm->bus->retry_sector_num; + bm->migration_retry_nsector = bm->bus->retry_nsector; + bm->migration_compat_status = + (bm->status & ~abused_bits) | (bm->bus->error_status & abused_bits); +} + +/* This function accesses bm->bus->error_status which is loaded only after + * BMDMA itself. This is why the function is called from ide_pci_post_load + * instead of being registered with VMState where it would run too early. */ +static int ide_bmdma_post_load(void *opaque, int version_id) +{ + BMDMAState *bm = opaque; + uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; + + if (bm->status == 0) { + bm->status = bm->migration_compat_status & ~abused_bits; + bm->bus->error_status |= bm->migration_compat_status & abused_bits; + } + if (bm->bus->error_status) { + bm->bus->retry_sector_num = bm->migration_retry_sector_num; + bm->bus->retry_nsector = bm->migration_retry_nsector; + bm->bus->retry_unit = bm->migration_retry_unit; + } + + return 0; +} + +static const VMStateDescription vmstate_bmdma_current = { + .name = "ide bmdma_current", + .version_id = 1, + .minimum_version_id = 1, + .needed = ide_bmdma_current_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cur_addr, BMDMAState), + VMSTATE_UINT32(cur_prd_last, BMDMAState), + VMSTATE_UINT32(cur_prd_addr, BMDMAState), + VMSTATE_UINT32(cur_prd_len, BMDMAState), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_bmdma_status = { + .name ="ide bmdma/status", + .version_id = 1, + .minimum_version_id = 1, + .needed = ide_bmdma_status_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT8(status, BMDMAState), + VMSTATE_END_OF_LIST() + } +}; + +static const VMStateDescription vmstate_bmdma = { + .name = "ide bmdma", + .version_id = 3, + .minimum_version_id = 0, + .pre_save = ide_bmdma_pre_save, + .fields = (VMStateField[]) { + VMSTATE_UINT8(cmd, BMDMAState), + VMSTATE_UINT8(migration_compat_status, BMDMAState), + VMSTATE_UINT32(addr, BMDMAState), + VMSTATE_INT64(migration_retry_sector_num, BMDMAState), + VMSTATE_UINT32(migration_retry_nsector, BMDMAState), + VMSTATE_UINT8(migration_retry_unit, BMDMAState), + VMSTATE_END_OF_LIST() + }, + .subsections = (const VMStateDescription*[]) { + &vmstate_bmdma_current, + &vmstate_bmdma_status, + NULL + } +}; + +static int ide_pci_post_load(void *opaque, int version_id) +{ + PCIIDEState *d = opaque; + int i; + + for(i = 0; i < 2; i++) { + /* current versions always store 0/1, but older version + stored bigger values. We only need last bit */ + d->bmdma[i].migration_retry_unit &= 1; + ide_bmdma_post_load(&d->bmdma[i], -1); + } + + return 0; +} + +const VMStateDescription vmstate_ide_pci = { + .name = "ide", + .version_id = 3, + .minimum_version_id = 0, + .post_load = ide_pci_post_load, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(parent_obj, PCIIDEState), + VMSTATE_STRUCT_ARRAY(bmdma, PCIIDEState, 2, 0, + vmstate_bmdma, BMDMAState), + VMSTATE_IDE_BUS_ARRAY(bus, PCIIDEState, 2), + VMSTATE_IDE_DRIVES(bus[0].ifs, PCIIDEState), + VMSTATE_IDE_DRIVES(bus[1].ifs, PCIIDEState), + VMSTATE_END_OF_LIST() + } +}; + +void pci_ide_create_devs(PCIDevice *dev, DriveInfo **hd_table) +{ + PCIIDEState *d = PCI_IDE(dev); + static const int bus[4] = { 0, 0, 1, 1 }; + static const int unit[4] = { 0, 1, 0, 1 }; + int i; + + for (i = 0; i < 4; i++) { + if (hd_table[i] == NULL) + continue; + ide_create_drive(d->bus+bus[i], unit[i], hd_table[i]); + } +} + +static const struct IDEDMAOps bmdma_ops = { + .start_dma = bmdma_start_dma, + .prepare_buf = bmdma_prepare_buf, + .rw_buf = bmdma_rw_buf, + .restart_dma = bmdma_restart_dma, + .set_inactive = bmdma_set_inactive, + .reset = bmdma_reset, +}; + +void bmdma_init(IDEBus *bus, BMDMAState *bm, PCIIDEState *d) +{ + if (bus->dma == &bm->dma) { + return; + } + + bm->dma.ops = &bmdma_ops; + bus->dma = &bm->dma; + bm->irq = bus->irq; + bus->irq = qemu_allocate_irq(bmdma_irq, bm, 0); + bm->pci_dev = d; +} + +static const TypeInfo pci_ide_type_info = { + .name = TYPE_PCI_IDE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PCIIDEState), + .abstract = true, +}; + +static void pci_ide_register_types(void) +{ + type_register_static(&pci_ide_type_info); +} + +type_init(pci_ide_register_types) |