Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 583 insertions, 0 deletions

diff --git a/qemu/hw/ide/internal.h b/qemu/hw/ide/internal.h
new file mode 100644
index 000000000..30fdcbc5f
--- /dev/null
+++ b/qemu/hw/ide/internal.h
@@ -0,0 +1,583 @@
+#ifndef HW_IDE_INTERNAL_H
+#define HW_IDE_INTERNAL_H
+
+/*
+ * QEMU IDE Emulation -- internal header file
+ * only files in hw/ide/ are supposed to include this file.
+ * non-internal declarations are in hw/ide.h
+ */
+#include <hw/ide.h>
+#include <hw/isa/isa.h>
+#include "sysemu/dma.h"
+#include "sysemu/sysemu.h"
+#include "hw/block/block.h"
+#include "block/scsi.h"
+
+/* debug IDE devices */
+//#define DEBUG_IDE
+//#define DEBUG_IDE_ATAPI
+//#define DEBUG_AIO
+#define USE_DMA_CDROM
+
+typedef struct IDEBus IDEBus;
+typedef struct IDEDevice IDEDevice;
+typedef struct IDEState IDEState;
+typedef struct IDEDMA IDEDMA;
+typedef struct IDEDMAOps IDEDMAOps;
+
+#define TYPE_IDE_BUS "IDE"
+#define IDE_BUS(obj) OBJECT_CHECK(IDEBus, (obj), TYPE_IDE_BUS)
+
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define INDEX_STAT		0x02
+#define ECC_STAT		0x04	/* Corrected error */
+#define DRQ_STAT		0x08
+#define SEEK_STAT		0x10
+#define SRV_STAT		0x10
+#define WRERR_STAT		0x20
+#define READY_STAT		0x40
+#define BUSY_STAT		0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR		0x01	/* Bad address mark */
+#define TRK0_ERR		0x02	/* couldn't find track 0 */
+#define ABRT_ERR		0x04	/* Command aborted */
+#define MCR_ERR			0x08	/* media change request */
+#define ID_ERR			0x10	/* ID field not found */
+#define MC_ERR			0x20	/* media changed */
+#define ECC_ERR			0x40	/* Uncorrectable ECC error */
+#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
+#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD			0x01
+#define IO			0x02
+#define REL			0x04
+#define TAG_MASK		0xf8
+
+#define IDE_CMD_RESET           0x04
+#define IDE_CMD_DISABLE_IRQ     0x02
+
+/* ACS-2 T13/2015-D Table B.2 Command codes */
+#define WIN_NOP				0x00
+/* reserved                             0x01..0x02 */
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+/* reserved                             0x04..0x05 */
+#define WIN_DSM                         0x06
+/* reserved                             0x07 */
+#define WIN_DEVICE_RESET		0x08
+/* reserved                             0x09..0x0a */
+/* REQUEST SENSE DATA EXT               0x0B */
+/* reserved                             0x0C..0x0F */
+#define WIN_RECAL                       0x10 /* obsolete since ATA4 */
+/* obsolete since ATA3, retired in ATA4 0x11..0x1F */
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_ONCE                   0x21 /* 28-Bit w/o retries, obsolete since ATA5 */
+/* obsolete since ATA4                  0x22..0x23 */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT          0x26 /* 48-Bit, obsolete since ACS2 */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+/* reserved                             0x28 */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+/* READ STREAM DMA EXT                  0x2A */
+/* READ STREAM EXT                      0x2B */
+/* reserved                             0x2C..0x2E */
+/* READ LOG EXT                         0x2F */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE                  0x31 /* 28-Bit w/o retries, obsolete since ATA5 */
+/* obsolete since ATA4                  0x32..0x33 */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT                 0x37 /* 48-Bit, obsolete since ACS2 */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+/* WRITE STREAM DMA EXT                 0x3A */
+/* WRITE STREAM EXT                     0x3B */
+#define WIN_WRITE_VERIFY                0x3C /* 28-Bit, obsolete since ATA4 */
+/* WRITE DMA FUA EXT                    0x3D */
+/* obsolete since ACS2                  0x3E */
+/* WRITE LOG EXT                        0x3F */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE                 0x41 /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+/* reserved                             0x43..0x44 */
+/* WRITE UNCORRECTABLE EXT              0x45 */
+/* reserved                             0x46 */
+/* READ LOG DMA EXT                     0x47 */
+/* reserved                             0x48..0x4F */
+/* obsolete since ATA4                  0x50 */
+/* CONFIGURE STREAM                     0x51 */
+/* reserved                             0x52..0x56 */
+/* WRITE LOG DMA EXT                    0x57 */
+/* reserved                             0x58..0x5A */
+/* TRUSTED NON DATA                     0x5B */
+/* TRUSTED RECEIVE                      0x5C */
+/* TRUSTED RECEIVE DMA                  0x5D */
+/* TRUSTED SEND                         0x5E */
+/* TRUSTED SEND DMA                     0x5F */
+/* READ FPDMA QUEUED                    0x60 */
+/* WRITE FPDMA QUEUED                   0x61 */
+/* reserved                             0x62->0x6F */
+#define WIN_SEEK                        0x70 /* obsolete since ATA7 */
+/* reserved                             0x71-0x7F */
+/* vendor specific                      0x80-0x86 */
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+/* vendor specific                      0x88-0x8F */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY                     0x91 /* set drive geometry translation, obsolete since ATA6 */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+/* DOWNLOAD MICROCODE DMA               0x93 */
+#define WIN_STANDBYNOW2                 0x94 /* retired in ATA4 */
+#define WIN_IDLEIMMEDIATE2              0x95 /* force drive to become "ready", retired in ATA4 */
+#define WIN_STANDBY2                    0x96 /* retired in ATA4 */
+#define WIN_SETIDLE2                    0x97 /* retired in ATA4 */
+#define WIN_CHECKPOWERMODE2             0x98 /* retired in ATA4 */
+#define WIN_SLEEPNOW2                   0x99 /* retired in ATA4 */
+/* vendor specific                      0x9A */
+/* reserved                             0x9B..0x9F */
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE              0xA2 /* obsolete since ACS2 */
+/* reserved                             0xA3..0xAF */
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+/* Device Configuration Overlay         0xB1 */
+/* reserved                             0xB2..0xB3 */
+/* Sanitize Device                      0xB4 */
+/* reserved                             0xB5 */
+/* NV Cache                             0xB6 */
+/* reserved for CFA                     0xB7..0xBB */
+#define CFA_ACCESS_METADATA_STORAGE	0xB8
+/* reserved                             0xBC..0xBF */
+#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
+/* vendor specific                      0xC1..0xC3 */
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED              0xC7 /* read sectors using Queued DMA transfers, obsolete since ACS2 */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_READDMA_ONCE                0xC9 /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_ONCE               0xCB /* 28-Bit - w/o retries, obsolete since ATA5 */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers, obsolete since ACS2 */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+/* WRITE MULTIPLE FUA EXT               0xCE */
+/* reserved                             0xCF..0xDO */
+/* CHECK MEDIA CARD TYPE                0xD1 */
+/* reserved for media card pass through 0xD2..0xD4 */
+/* reserved                             0xD5..0xD9 */
+#define WIN_GETMEDIASTATUS              0xDA /* obsolete since ATA8 */
+/* obsolete since ATA3, retired in ATA4 0xDB..0xDD */
+#define WIN_DOORLOCK                    0xDE /* lock door on removable drives, obsolete since ATA8 */
+#define WIN_DOORUNLOCK                  0xDF /* unlock door on removable drives, obsolete since ATA8 */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+/* READ BUFFER DMA                      0xE9 */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+/* WRITE BUFFER DMA                     0xEB */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT                  0xED /* obsolete since ATA8 */
+/* obsolete since ATA4                  0xEE */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define IBM_SENSE_CONDITION             0xF0 /* measure disk temperature, vendor specific */
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define CFA_WEAR_LEVEL                  0xF5 /* microdrives implement as NOP; not specified in T13! */
+#define WIN_SECURITY_DISABLE		0xF6
+/* vendor specific                      0xF7 */
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+/* vendor specific                      0xFA..0xFF */
+
+/* set to 1 set disable mult support */
+#define MAX_MULT_SECTORS 16
+
+#define IDE_DMA_BUF_SECTORS 256
+
+/* feature values for Data Set Management */
+#define DSM_TRIM                        0x01
+
+#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
+#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
+#endif
+
+/* ATAPI defines */
+
+#define ATAPI_PACKET_SIZE 12
+
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK			    0xa1
+#define GPCMD_CLOSE_TRACK		    0x5b
+#define GPCMD_FLUSH_CACHE		    0x35
+#define GPCMD_FORMAT_UNIT		    0x04
+#define GPCMD_GET_CONFIGURATION		    0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE		    0xac
+#define GPCMD_INQUIRY			    0x12
+#define GPCMD_LOAD_UNLOAD		    0xa6
+#define GPCMD_MECHANISM_STATUS		    0xbd
+#define GPCMD_MODE_SELECT_10		    0x55
+#define GPCMD_MODE_SENSE_10		    0x5a
+#define GPCMD_PAUSE_RESUME		    0x4b
+#define GPCMD_PLAY_AUDIO_10		    0x45
+#define GPCMD_PLAY_AUDIO_MSF		    0x47
+#define GPCMD_PLAY_AUDIO_TI		    0x48
+#define GPCMD_PLAY_CD			    0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
+#define GPCMD_READ_10			    0x28
+#define GPCMD_READ_12			    0xa8
+#define GPCMD_READ_CDVD_CAPACITY	    0x25
+#define GPCMD_READ_CD			    0xbe
+#define GPCMD_READ_CD_MSF		    0xb9
+#define GPCMD_READ_DISC_INFO		    0x51
+#define GPCMD_READ_DVD_STRUCTURE	    0xad
+#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
+#define GPCMD_READ_HEADER		    0x44
+#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
+#define GPCMD_READ_SUBCHANNEL		    0x42
+#define GPCMD_READ_TOC_PMA_ATIP		    0x43
+#define GPCMD_REPAIR_RZONE_TRACK	    0x58
+#define GPCMD_REPORT_KEY		    0xa4
+#define GPCMD_REQUEST_SENSE		    0x03
+#define GPCMD_RESERVE_RZONE_TRACK	    0x53
+#define GPCMD_SCAN			    0xba
+#define GPCMD_SEEK			    0x2b
+#define GPCMD_SEND_DVD_STRUCTURE	    0xad
+#define GPCMD_SEND_EVENT		    0xa2
+#define GPCMD_SEND_KEY			    0xa3
+#define GPCMD_SEND_OPC			    0x54
+#define GPCMD_SET_READ_AHEAD		    0xa7
+#define GPCMD_SET_STREAMING		    0xb6
+#define GPCMD_START_STOP_UNIT		    0x1b
+#define GPCMD_STOP_PLAY_SCAN		    0x4e
+#define GPCMD_TEST_UNIT_READY		    0x00
+#define GPCMD_VERIFY_10			    0x2f
+#define GPCMD_WRITE_10			    0x2a
+#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED			    0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI		    0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS		    0xda
+#define GPCMD_MODE_SENSE_6		    0x1a
+
+#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
+#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
+#define ATAPI_INT_REASON_REL            0x04
+#define ATAPI_INT_REASON_TAG            0xf8
+
+/* same constants as bochs */
+#define ASC_NO_SEEK_COMPLETE                 0x02
+#define ASC_ILLEGAL_OPCODE                   0x20
+#define ASC_LOGICAL_BLOCK_OOR                0x21
+#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
+#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
+#define ASC_INCOMPATIBLE_FORMAT              0x30
+#define ASC_MEDIUM_NOT_PRESENT               0x3a
+#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
+#define ASC_DATA_PHASE_ERROR                 0x4b
+#define ASC_MEDIA_REMOVAL_PREVENTED          0x53
+
+#define CFA_NO_ERROR            0x00
+#define CFA_MISC_ERROR          0x09
+#define CFA_INVALID_COMMAND     0x20
+#define CFA_INVALID_ADDRESS     0x21
+#define CFA_ADDRESS_OVERFLOW    0x2f
+
+#define SMART_READ_DATA       0xd0
+#define SMART_READ_THRESH     0xd1
+#define SMART_ATTR_AUTOSAVE   0xd2
+#define SMART_SAVE_ATTR       0xd3
+#define SMART_EXECUTE_OFFLINE 0xd4
+#define SMART_READ_LOG        0xd5
+#define SMART_WRITE_LOG       0xd6
+#define SMART_ENABLE          0xd8
+#define SMART_DISABLE         0xd9
+#define SMART_STATUS          0xda
+
+typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
+
+typedef void EndTransferFunc(IDEState *);
+
+typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockCompletionFunc *);
+typedef void DMAVoidFunc(IDEDMA *);
+typedef int DMAIntFunc(IDEDMA *, int);
+typedef int32_t DMAInt32Func(IDEDMA *, int32_t len);
+typedef void DMAu32Func(IDEDMA *, uint32_t);
+typedef void DMAStopFunc(IDEDMA *, bool);
+typedef void DMARestartFunc(void *, int, RunState);
+
+struct unreported_events {
+    bool eject_request;
+    bool new_media;
+};
+
+enum ide_dma_cmd {
+    IDE_DMA_READ,
+    IDE_DMA_WRITE,
+    IDE_DMA_TRIM,
+};
+
+#define ide_cmd_is_read(s) \
+	((s)->dma_cmd == IDE_DMA_READ)
+
+/* NOTE: IDEState represents in fact one drive */
+struct IDEState {
+    IDEBus *bus;
+    uint8_t unit;
+    /* ide config */
+    IDEDriveKind drive_kind;
+    int cylinders, heads, sectors, chs_trans;
+    int64_t nb_sectors;
+    int mult_sectors;
+    int identify_set;
+    uint8_t identify_data[512];
+    int drive_serial;
+    char drive_serial_str[21];
+    char drive_model_str[41];
+    uint64_t wwn;
+    /* ide regs */
+    uint8_t feature;
+    uint8_t error;
+    uint32_t nsector;
+    uint8_t sector;
+    uint8_t lcyl;
+    uint8_t hcyl;
+    /* other part of tf for lba48 support */
+    uint8_t hob_feature;
+    uint8_t hob_nsector;
+    uint8_t hob_sector;
+    uint8_t hob_lcyl;
+    uint8_t hob_hcyl;
+
+    uint8_t select;
+    uint8_t status;
+
+    /* set for lba48 access */
+    uint8_t lba48;
+    BlockBackend *blk;
+    char version[9];
+    /* ATAPI specific */
+    struct unreported_events events;
+    uint8_t sense_key;
+    uint8_t asc;
+    bool tray_open;
+    bool tray_locked;
+    uint8_t cdrom_changed;
+    int packet_transfer_size;
+    int elementary_transfer_size;
+    int32_t io_buffer_index;
+    int lba;
+    int cd_sector_size;
+    int atapi_dma; /* true if dma is requested for the packet cmd */
+    BlockAcctCookie acct;
+    BlockAIOCB *pio_aiocb;
+    struct iovec iov;
+    QEMUIOVector qiov;
+    /* ATA DMA state */
+    int32_t io_buffer_offset;
+    int32_t io_buffer_size;
+    QEMUSGList sg;
+    /* PIO transfer handling */
+    int req_nb_sectors; /* number of sectors per interrupt */
+    EndTransferFunc *end_transfer_func;
+    uint8_t *data_ptr;
+    uint8_t *data_end;
+    uint8_t *io_buffer;
+    /* PIO save/restore */
+    int32_t io_buffer_total_len;
+    int32_t cur_io_buffer_offset;
+    int32_t cur_io_buffer_len;
+    uint8_t end_transfer_fn_idx;
+    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
+    uint32_t irq_count; /* counts IRQs when using win2k install hack */
+    /* CF-ATA extended error */
+    uint8_t ext_error;
+    /* CF-ATA metadata storage */
+    uint32_t mdata_size;
+    uint8_t *mdata_storage;
+    int media_changed;
+    enum ide_dma_cmd dma_cmd;
+    /* SMART */
+    uint8_t smart_enabled;
+    uint8_t smart_autosave;
+    int smart_errors;
+    uint8_t smart_selftest_count;
+    uint8_t *smart_selftest_data;
+    /* AHCI */
+    int ncq_queues;
+};
+
+struct IDEDMAOps {
+    DMAStartFunc *start_dma;
+    DMAVoidFunc *start_transfer;
+    DMAInt32Func *prepare_buf;
+    DMAu32Func *commit_buf;
+    DMAIntFunc *rw_buf;
+    DMAVoidFunc *restart;
+    DMAVoidFunc *restart_dma;
+    DMAStopFunc *set_inactive;
+    DMAVoidFunc *cmd_done;
+    DMAVoidFunc *reset;
+};
+
+struct IDEDMA {
+    const struct IDEDMAOps *ops;
+    struct iovec iov;
+    QEMUIOVector qiov;
+    BlockAIOCB *aiocb;
+};
+
+struct IDEBus {
+    BusState qbus;
+    IDEDevice *master;
+    IDEDevice *slave;
+    IDEState ifs[2];
+    QEMUBH *bh;
+
+    int bus_id;
+    int max_units;
+    IDEDMA *dma;
+    uint8_t unit;
+    uint8_t cmd;
+    qemu_irq irq;
+
+    int error_status;
+    uint8_t retry_unit;
+    int64_t retry_sector_num;
+    uint32_t retry_nsector;
+};
+
+#define TYPE_IDE_DEVICE "ide-device"
+#define IDE_DEVICE(obj) \
+     OBJECT_CHECK(IDEDevice, (obj), TYPE_IDE_DEVICE)
+#define IDE_DEVICE_CLASS(klass) \
+     OBJECT_CLASS_CHECK(IDEDeviceClass, (klass), TYPE_IDE_DEVICE)
+#define IDE_DEVICE_GET_CLASS(obj) \
+     OBJECT_GET_CLASS(IDEDeviceClass, (obj), TYPE_IDE_DEVICE)
+
+typedef struct IDEDeviceClass {
+    DeviceClass parent_class;
+    int (*init)(IDEDevice *dev);
+} IDEDeviceClass;
+
+struct IDEDevice {
+    DeviceState qdev;
+    uint32_t unit;
+    BlockConf conf;
+    int chs_trans;
+    char *version;
+    char *serial;
+    char *model;
+    uint64_t wwn;
+};
+
+/* These are used for the error_status field of IDEBus */
+#define IDE_RETRY_DMA  0x08
+#define IDE_RETRY_PIO  0x10
+#define IDE_RETRY_READ  0x20
+#define IDE_RETRY_FLUSH 0x40
+#define IDE_RETRY_TRIM 0x80
+#define IDE_RETRY_HBA  0x100
+
+static inline IDEState *idebus_active_if(IDEBus *bus)
+{
+    return bus->ifs + bus->unit;
+}
+
+static inline void ide_set_irq(IDEBus *bus)
+{
+    if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
+        qemu_irq_raise(bus->irq);
+    }
+}
+
+/* hw/ide/core.c */
+extern const VMStateDescription vmstate_ide_bus;
+
+#define VMSTATE_IDE_BUS(_field, _state)                          \
+    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
+
+#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
+    VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
+
+extern const VMStateDescription vmstate_ide_drive;
+
+#define VMSTATE_IDE_DRIVES(_field, _state) \
+    VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
+
+#define VMSTATE_IDE_DRIVE(_field, _state) \
+    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_drive, IDEState)
+
+void ide_bus_reset(IDEBus *bus);
+int64_t ide_get_sector(IDEState *s);
+void ide_set_sector(IDEState *s, int64_t sector_num);
+
+void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
+void ide_dma_error(IDEState *s);
+
+void ide_atapi_cmd_ok(IDEState *s);
+void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
+void ide_atapi_dma_restart(IDEState *s);
+void ide_atapi_io_error(IDEState *s, int ret);
+
+void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
+uint32_t ide_status_read(void *opaque, uint32_t addr);
+void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
+void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readw(void *opaque, uint32_t addr);
+void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
+uint32_t ide_data_readl(void *opaque, uint32_t addr);
+
+int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind,
+                   const char *version, const char *serial, const char *model,
+                   uint64_t wwn,
+                   uint32_t cylinders, uint32_t heads, uint32_t secs,
+                   int chs_trans);
+void ide_init2(IDEBus *bus, qemu_irq irq);
+void ide_init_ioport(IDEBus *bus, ISADevice *isa, int iobase, int iobase2);
+void ide_register_restart_cb(IDEBus *bus);
+
+void ide_exec_cmd(IDEBus *bus, uint32_t val);
+
+void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
+                        EndTransferFunc *end_transfer_func);
+void ide_transfer_stop(IDEState *s);
+void ide_set_inactive(IDEState *s, bool more);
+BlockAIOCB *ide_issue_trim(BlockBackend *blk,
+        int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+        BlockCompletionFunc *cb, void *opaque);
+
+/* hw/ide/atapi.c */
+void ide_atapi_cmd(IDEState *s);
+void ide_atapi_cmd_reply_end(IDEState *s);
+
+/* hw/ide/qdev.c */
+void ide_bus_new(IDEBus *idebus, size_t idebus_size, DeviceState *dev,
+                 int bus_id, int max_units);
+IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
+
+#endif /* HW_IDE_INTERNAL_H */