Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 808 insertions, 0 deletions

diff --git a/qemu/hw/gpio/omap_gpio.c b/qemu/hw/gpio/omap_gpio.c
new file mode 100644
index 000000000..d92f8cfba
--- /dev/null
+++ b/qemu/hw/gpio/omap_gpio.c
@@ -0,0 +1,808 @@
+/*
+ * TI OMAP processors GPIO emulation.
+ *
+ * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "hw/hw.h"
+#include "hw/arm/omap.h"
+#include "hw/sysbus.h"
+
+struct omap_gpio_s {
+    qemu_irq irq;
+    qemu_irq handler[16];
+
+    uint16_t inputs;
+    uint16_t outputs;
+    uint16_t dir;
+    uint16_t edge;
+    uint16_t mask;
+    uint16_t ints;
+    uint16_t pins;
+};
+
+#define TYPE_OMAP1_GPIO "omap-gpio"
+#define OMAP1_GPIO(obj) \
+    OBJECT_CHECK(struct omap_gpif_s, (obj), TYPE_OMAP1_GPIO)
+
+struct omap_gpif_s {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    int mpu_model;
+    void *clk;
+    struct omap_gpio_s omap1;
+};
+
+/* General-Purpose I/O of OMAP1 */
+static void omap_gpio_set(void *opaque, int line, int level)
+{
+    struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1;
+    uint16_t prev = s->inputs;
+
+    if (level)
+        s->inputs |= 1 << line;
+    else
+        s->inputs &= ~(1 << line);
+
+    if (((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) &
+                    (1 << line) & s->dir & ~s->mask) {
+        s->ints |= 1 << line;
+        qemu_irq_raise(s->irq);
+    }
+}
+
+static uint64_t omap_gpio_read(void *opaque, hwaddr addr,
+                               unsigned size)
+{
+    struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
+    int offset = addr & OMAP_MPUI_REG_MASK;
+
+    if (size != 2) {
+        return omap_badwidth_read16(opaque, addr);
+    }
+
+    switch (offset) {
+    case 0x00:	/* DATA_INPUT */
+        return s->inputs & s->pins;
+
+    case 0x04:	/* DATA_OUTPUT */
+        return s->outputs;
+
+    case 0x08:	/* DIRECTION_CONTROL */
+        return s->dir;
+
+    case 0x0c:	/* INTERRUPT_CONTROL */
+        return s->edge;
+
+    case 0x10:	/* INTERRUPT_MASK */
+        return s->mask;
+
+    case 0x14:	/* INTERRUPT_STATUS */
+        return s->ints;
+
+    case 0x18:	/* PIN_CONTROL (not in OMAP310) */
+        OMAP_BAD_REG(addr);
+        return s->pins;
+    }
+
+    OMAP_BAD_REG(addr);
+    return 0;
+}
+
+static void omap_gpio_write(void *opaque, hwaddr addr,
+                            uint64_t value, unsigned size)
+{
+    struct omap_gpio_s *s = (struct omap_gpio_s *) opaque;
+    int offset = addr & OMAP_MPUI_REG_MASK;
+    uint16_t diff;
+    int ln;
+
+    if (size != 2) {
+        omap_badwidth_write16(opaque, addr, value);
+        return;
+    }
+
+    switch (offset) {
+    case 0x00:	/* DATA_INPUT */
+        OMAP_RO_REG(addr);
+        return;
+
+    case 0x04:	/* DATA_OUTPUT */
+        diff = (s->outputs ^ value) & ~s->dir;
+        s->outputs = value;
+        while ((ln = ctz32(diff)) != 32) {
+            if (s->handler[ln])
+                qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+            diff &= ~(1 << ln);
+        }
+        break;
+
+    case 0x08:	/* DIRECTION_CONTROL */
+        diff = s->outputs & (s->dir ^ value);
+        s->dir = value;
+
+        value = s->outputs & ~s->dir;
+        while ((ln = ctz32(diff)) != 32) {
+            if (s->handler[ln])
+                qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+            diff &= ~(1 << ln);
+        }
+        break;
+
+    case 0x0c:	/* INTERRUPT_CONTROL */
+        s->edge = value;
+        break;
+
+    case 0x10:	/* INTERRUPT_MASK */
+        s->mask = value;
+        break;
+
+    case 0x14:	/* INTERRUPT_STATUS */
+        s->ints &= ~value;
+        if (!s->ints)
+            qemu_irq_lower(s->irq);
+        break;
+
+    case 0x18:	/* PIN_CONTROL (not in OMAP310 TRM) */
+        OMAP_BAD_REG(addr);
+        s->pins = value;
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+/* *Some* sources say the memory region is 32-bit.  */
+static const MemoryRegionOps omap_gpio_ops = {
+    .read = omap_gpio_read,
+    .write = omap_gpio_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void omap_gpio_reset(struct omap_gpio_s *s)
+{
+    s->inputs = 0;
+    s->outputs = ~0;
+    s->dir = ~0;
+    s->edge = ~0;
+    s->mask = ~0;
+    s->ints = 0;
+    s->pins = ~0;
+}
+
+struct omap2_gpio_s {
+    qemu_irq irq[2];
+    qemu_irq wkup;
+    qemu_irq *handler;
+    MemoryRegion iomem;
+
+    uint8_t revision;
+    uint8_t config[2];
+    uint32_t inputs;
+    uint32_t outputs;
+    uint32_t dir;
+    uint32_t level[2];
+    uint32_t edge[2];
+    uint32_t mask[2];
+    uint32_t wumask;
+    uint32_t ints[2];
+    uint32_t debounce;
+    uint8_t delay;
+};
+
+#define TYPE_OMAP2_GPIO "omap2-gpio"
+#define OMAP2_GPIO(obj) \
+    OBJECT_CHECK(struct omap2_gpif_s, (obj), TYPE_OMAP2_GPIO)
+
+struct omap2_gpif_s {
+    SysBusDevice parent_obj;
+
+    MemoryRegion iomem;
+    int mpu_model;
+    void *iclk;
+    void *fclk[6];
+    int modulecount;
+    struct omap2_gpio_s *modules;
+    qemu_irq *handler;
+    int autoidle;
+    int gpo;
+};
+
+/* General-Purpose Interface of OMAP2/3 */
+static inline void omap2_gpio_module_int_update(struct omap2_gpio_s *s,
+                                                int line)
+{
+    qemu_set_irq(s->irq[line], s->ints[line] & s->mask[line]);
+}
+
+static void omap2_gpio_module_wake(struct omap2_gpio_s *s, int line)
+{
+    if (!(s->config[0] & (1 << 2)))			/* ENAWAKEUP */
+        return;
+    if (!(s->config[0] & (3 << 3)))			/* Force Idle */
+        return;
+    if (!(s->wumask & (1 << line)))
+        return;
+
+    qemu_irq_raise(s->wkup);
+}
+
+static inline void omap2_gpio_module_out_update(struct omap2_gpio_s *s,
+                uint32_t diff)
+{
+    int ln;
+
+    s->outputs ^= diff;
+    diff &= ~s->dir;
+    while ((ln = ctz32(diff)) != 32) {
+        qemu_set_irq(s->handler[ln], (s->outputs >> ln) & 1);
+        diff &= ~(1 << ln);
+    }
+}
+
+static void omap2_gpio_module_level_update(struct omap2_gpio_s *s, int line)
+{
+    s->ints[line] |= s->dir &
+            ((s->inputs & s->level[1]) | (~s->inputs & s->level[0]));
+    omap2_gpio_module_int_update(s, line);
+}
+
+static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line)
+{
+    s->ints[0] |= 1 << line;
+    omap2_gpio_module_int_update(s, 0);
+    s->ints[1] |= 1 << line;
+    omap2_gpio_module_int_update(s, 1);
+    omap2_gpio_module_wake(s, line);
+}
+
+static void omap2_gpio_set(void *opaque, int line, int level)
+{
+    struct omap2_gpif_s *p = opaque;
+    struct omap2_gpio_s *s = &p->modules[line >> 5];
+
+    line &= 31;
+    if (level) {
+        if (s->dir & (1 << line) & ((~s->inputs & s->edge[0]) | s->level[1]))
+            omap2_gpio_module_int(s, line);
+        s->inputs |= 1 << line;
+    } else {
+        if (s->dir & (1 << line) & ((s->inputs & s->edge[1]) | s->level[0]))
+            omap2_gpio_module_int(s, line);
+        s->inputs &= ~(1 << line);
+    }
+}
+
+static void omap2_gpio_module_reset(struct omap2_gpio_s *s)
+{
+    s->config[0] = 0;
+    s->config[1] = 2;
+    s->ints[0] = 0;
+    s->ints[1] = 0;
+    s->mask[0] = 0;
+    s->mask[1] = 0;
+    s->wumask = 0;
+    s->dir = ~0;
+    s->level[0] = 0;
+    s->level[1] = 0;
+    s->edge[0] = 0;
+    s->edge[1] = 0;
+    s->debounce = 0;
+    s->delay = 0;
+}
+
+static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr)
+{
+    struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
+
+    switch (addr) {
+    case 0x00:	/* GPIO_REVISION */
+        return s->revision;
+
+    case 0x10:	/* GPIO_SYSCONFIG */
+        return s->config[0];
+
+    case 0x14:	/* GPIO_SYSSTATUS */
+        return 0x01;
+
+    case 0x18:	/* GPIO_IRQSTATUS1 */
+        return s->ints[0];
+
+    case 0x1c:	/* GPIO_IRQENABLE1 */
+    case 0x60:	/* GPIO_CLEARIRQENABLE1 */
+    case 0x64:	/* GPIO_SETIRQENABLE1 */
+        return s->mask[0];
+
+    case 0x20:	/* GPIO_WAKEUPENABLE */
+    case 0x80:	/* GPIO_CLEARWKUENA */
+    case 0x84:	/* GPIO_SETWKUENA */
+        return s->wumask;
+
+    case 0x28:	/* GPIO_IRQSTATUS2 */
+        return s->ints[1];
+
+    case 0x2c:	/* GPIO_IRQENABLE2 */
+    case 0x70:	/* GPIO_CLEARIRQENABLE2 */
+    case 0x74:	/* GPIO_SETIREQNEABLE2 */
+        return s->mask[1];
+
+    case 0x30:	/* GPIO_CTRL */
+        return s->config[1];
+
+    case 0x34:	/* GPIO_OE */
+        return s->dir;
+
+    case 0x38:	/* GPIO_DATAIN */
+        return s->inputs;
+
+    case 0x3c:	/* GPIO_DATAOUT */
+    case 0x90:	/* GPIO_CLEARDATAOUT */
+    case 0x94:	/* GPIO_SETDATAOUT */
+        return s->outputs;
+
+    case 0x40:	/* GPIO_LEVELDETECT0 */
+        return s->level[0];
+
+    case 0x44:	/* GPIO_LEVELDETECT1 */
+        return s->level[1];
+
+    case 0x48:	/* GPIO_RISINGDETECT */
+        return s->edge[0];
+
+    case 0x4c:	/* GPIO_FALLINGDETECT */
+        return s->edge[1];
+
+    case 0x50:	/* GPIO_DEBOUNCENABLE */
+        return s->debounce;
+
+    case 0x54:	/* GPIO_DEBOUNCINGTIME */
+        return s->delay;
+    }
+
+    OMAP_BAD_REG(addr);
+    return 0;
+}
+
+static void omap2_gpio_module_write(void *opaque, hwaddr addr,
+                uint32_t value)
+{
+    struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque;
+    uint32_t diff;
+    int ln;
+
+    switch (addr) {
+    case 0x00:	/* GPIO_REVISION */
+    case 0x14:	/* GPIO_SYSSTATUS */
+    case 0x38:	/* GPIO_DATAIN */
+        OMAP_RO_REG(addr);
+        break;
+
+    case 0x10:	/* GPIO_SYSCONFIG */
+        if (((value >> 3) & 3) == 3)
+            fprintf(stderr, "%s: bad IDLEMODE value\n", __FUNCTION__);
+        if (value & 2)
+            omap2_gpio_module_reset(s);
+        s->config[0] = value & 0x1d;
+        break;
+
+    case 0x18:	/* GPIO_IRQSTATUS1 */
+        if (s->ints[0] & value) {
+            s->ints[0] &= ~value;
+            omap2_gpio_module_level_update(s, 0);
+        }
+        break;
+
+    case 0x1c:	/* GPIO_IRQENABLE1 */
+        s->mask[0] = value;
+        omap2_gpio_module_int_update(s, 0);
+        break;
+
+    case 0x20:	/* GPIO_WAKEUPENABLE */
+        s->wumask = value;
+        break;
+
+    case 0x28:	/* GPIO_IRQSTATUS2 */
+        if (s->ints[1] & value) {
+            s->ints[1] &= ~value;
+            omap2_gpio_module_level_update(s, 1);
+        }
+        break;
+
+    case 0x2c:	/* GPIO_IRQENABLE2 */
+        s->mask[1] = value;
+        omap2_gpio_module_int_update(s, 1);
+        break;
+
+    case 0x30:	/* GPIO_CTRL */
+        s->config[1] = value & 7;
+        break;
+
+    case 0x34:	/* GPIO_OE */
+        diff = s->outputs & (s->dir ^ value);
+        s->dir = value;
+
+        value = s->outputs & ~s->dir;
+        while ((ln = ctz32(diff)) != 32) {
+            diff &= ~(1 << ln);
+            qemu_set_irq(s->handler[ln], (value >> ln) & 1);
+        }
+
+        omap2_gpio_module_level_update(s, 0);
+        omap2_gpio_module_level_update(s, 1);
+        break;
+
+    case 0x3c:	/* GPIO_DATAOUT */
+        omap2_gpio_module_out_update(s, s->outputs ^ value);
+        break;
+
+    case 0x40:	/* GPIO_LEVELDETECT0 */
+        s->level[0] = value;
+        omap2_gpio_module_level_update(s, 0);
+        omap2_gpio_module_level_update(s, 1);
+        break;
+
+    case 0x44:	/* GPIO_LEVELDETECT1 */
+        s->level[1] = value;
+        omap2_gpio_module_level_update(s, 0);
+        omap2_gpio_module_level_update(s, 1);
+        break;
+
+    case 0x48:	/* GPIO_RISINGDETECT */
+        s->edge[0] = value;
+        break;
+
+    case 0x4c:	/* GPIO_FALLINGDETECT */
+        s->edge[1] = value;
+        break;
+
+    case 0x50:	/* GPIO_DEBOUNCENABLE */
+        s->debounce = value;
+        break;
+
+    case 0x54:	/* GPIO_DEBOUNCINGTIME */
+        s->delay = value;
+        break;
+
+    case 0x60:	/* GPIO_CLEARIRQENABLE1 */
+        s->mask[0] &= ~value;
+        omap2_gpio_module_int_update(s, 0);
+        break;
+
+    case 0x64:	/* GPIO_SETIRQENABLE1 */
+        s->mask[0] |= value;
+        omap2_gpio_module_int_update(s, 0);
+        break;
+
+    case 0x70:	/* GPIO_CLEARIRQENABLE2 */
+        s->mask[1] &= ~value;
+        omap2_gpio_module_int_update(s, 1);
+        break;
+
+    case 0x74:	/* GPIO_SETIREQNEABLE2 */
+        s->mask[1] |= value;
+        omap2_gpio_module_int_update(s, 1);
+        break;
+
+    case 0x80:	/* GPIO_CLEARWKUENA */
+        s->wumask &= ~value;
+        break;
+
+    case 0x84:	/* GPIO_SETWKUENA */
+        s->wumask |= value;
+        break;
+
+    case 0x90:	/* GPIO_CLEARDATAOUT */
+        omap2_gpio_module_out_update(s, s->outputs & value);
+        break;
+
+    case 0x94:	/* GPIO_SETDATAOUT */
+        omap2_gpio_module_out_update(s, ~s->outputs & value);
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+static uint32_t omap2_gpio_module_readp(void *opaque, hwaddr addr)
+{
+    return omap2_gpio_module_read(opaque, addr & ~3) >> ((addr & 3) << 3);
+}
+
+static void omap2_gpio_module_writep(void *opaque, hwaddr addr,
+                uint32_t value)
+{
+    uint32_t cur = 0;
+    uint32_t mask = 0xffff;
+
+    switch (addr & ~3) {
+    case 0x00:	/* GPIO_REVISION */
+    case 0x14:	/* GPIO_SYSSTATUS */
+    case 0x38:	/* GPIO_DATAIN */
+        OMAP_RO_REG(addr);
+        break;
+
+    case 0x10:	/* GPIO_SYSCONFIG */
+    case 0x1c:	/* GPIO_IRQENABLE1 */
+    case 0x20:	/* GPIO_WAKEUPENABLE */
+    case 0x2c:	/* GPIO_IRQENABLE2 */
+    case 0x30:	/* GPIO_CTRL */
+    case 0x34:	/* GPIO_OE */
+    case 0x3c:	/* GPIO_DATAOUT */
+    case 0x40:	/* GPIO_LEVELDETECT0 */
+    case 0x44:	/* GPIO_LEVELDETECT1 */
+    case 0x48:	/* GPIO_RISINGDETECT */
+    case 0x4c:	/* GPIO_FALLINGDETECT */
+    case 0x50:	/* GPIO_DEBOUNCENABLE */
+    case 0x54:	/* GPIO_DEBOUNCINGTIME */
+        cur = omap2_gpio_module_read(opaque, addr & ~3) &
+                ~(mask << ((addr & 3) << 3));
+
+        /* Fall through.  */
+    case 0x18:	/* GPIO_IRQSTATUS1 */
+    case 0x28:	/* GPIO_IRQSTATUS2 */
+    case 0x60:	/* GPIO_CLEARIRQENABLE1 */
+    case 0x64:	/* GPIO_SETIRQENABLE1 */
+    case 0x70:	/* GPIO_CLEARIRQENABLE2 */
+    case 0x74:	/* GPIO_SETIREQNEABLE2 */
+    case 0x80:	/* GPIO_CLEARWKUENA */
+    case 0x84:	/* GPIO_SETWKUENA */
+    case 0x90:	/* GPIO_CLEARDATAOUT */
+    case 0x94:	/* GPIO_SETDATAOUT */
+        value <<= (addr & 3) << 3;
+        omap2_gpio_module_write(opaque, addr, cur | value);
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+static const MemoryRegionOps omap2_gpio_module_ops = {
+    .old_mmio = {
+        .read = {
+            omap2_gpio_module_readp,
+            omap2_gpio_module_readp,
+            omap2_gpio_module_read,
+        },
+        .write = {
+            omap2_gpio_module_writep,
+            omap2_gpio_module_writep,
+            omap2_gpio_module_write,
+        },
+    },
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void omap_gpif_reset(DeviceState *dev)
+{
+    struct omap_gpif_s *s = OMAP1_GPIO(dev);
+
+    omap_gpio_reset(&s->omap1);
+}
+
+static void omap2_gpif_reset(DeviceState *dev)
+{
+    struct omap2_gpif_s *s = OMAP2_GPIO(dev);
+    int i;
+
+    for (i = 0; i < s->modulecount; i++) {
+        omap2_gpio_module_reset(&s->modules[i]);
+    }
+    s->autoidle = 0;
+    s->gpo = 0;
+}
+
+static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr,
+                                    unsigned size)
+{
+    struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
+
+    switch (addr) {
+    case 0x00:	/* IPGENERICOCPSPL_REVISION */
+        return 0x18;
+
+    case 0x10:	/* IPGENERICOCPSPL_SYSCONFIG */
+        return s->autoidle;
+
+    case 0x14:	/* IPGENERICOCPSPL_SYSSTATUS */
+        return 0x01;
+
+    case 0x18:	/* IPGENERICOCPSPL_IRQSTATUS */
+        return 0x00;
+
+    case 0x40:	/* IPGENERICOCPSPL_GPO */
+        return s->gpo;
+
+    case 0x50:	/* IPGENERICOCPSPL_GPI */
+        return 0x00;
+    }
+
+    OMAP_BAD_REG(addr);
+    return 0;
+}
+
+static void omap2_gpif_top_write(void *opaque, hwaddr addr,
+                                 uint64_t value, unsigned size)
+{
+    struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque;
+
+    switch (addr) {
+    case 0x00:	/* IPGENERICOCPSPL_REVISION */
+    case 0x14:	/* IPGENERICOCPSPL_SYSSTATUS */
+    case 0x18:	/* IPGENERICOCPSPL_IRQSTATUS */
+    case 0x50:	/* IPGENERICOCPSPL_GPI */
+        OMAP_RO_REG(addr);
+        break;
+
+    case 0x10:	/* IPGENERICOCPSPL_SYSCONFIG */
+        if (value & (1 << 1))					/* SOFTRESET */
+            omap2_gpif_reset(DEVICE(s));
+        s->autoidle = value & 1;
+        break;
+
+    case 0x40:	/* IPGENERICOCPSPL_GPO */
+        s->gpo = value & 1;
+        break;
+
+    default:
+        OMAP_BAD_REG(addr);
+        return;
+    }
+}
+
+static const MemoryRegionOps omap2_gpif_top_ops = {
+    .read = omap2_gpif_top_read,
+    .write = omap2_gpif_top_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int omap_gpio_init(SysBusDevice *sbd)
+{
+    DeviceState *dev = DEVICE(sbd);
+    struct omap_gpif_s *s = OMAP1_GPIO(dev);
+
+    if (!s->clk) {
+        hw_error("omap-gpio: clk not connected\n");
+    }
+    qdev_init_gpio_in(dev, omap_gpio_set, 16);
+    qdev_init_gpio_out(dev, s->omap1.handler, 16);
+    sysbus_init_irq(sbd, &s->omap1.irq);
+    memory_region_init_io(&s->iomem, OBJECT(s), &omap_gpio_ops, &s->omap1,
+                          "omap.gpio", 0x1000);
+    sysbus_init_mmio(sbd, &s->iomem);
+    return 0;
+}
+
+static int omap2_gpio_init(SysBusDevice *sbd)
+{
+    DeviceState *dev = DEVICE(sbd);
+    struct omap2_gpif_s *s = OMAP2_GPIO(dev);
+    int i;
+
+    if (!s->iclk) {
+        hw_error("omap2-gpio: iclk not connected\n");
+    }
+    if (s->mpu_model < omap3430) {
+        s->modulecount = (s->mpu_model < omap2430) ? 4 : 5;
+        memory_region_init_io(&s->iomem, OBJECT(s), &omap2_gpif_top_ops, s,
+                              "omap2.gpio", 0x1000);
+        sysbus_init_mmio(sbd, &s->iomem);
+    } else {
+        s->modulecount = 6;
+    }
+    s->modules = g_malloc0(s->modulecount * sizeof(struct omap2_gpio_s));
+    s->handler = g_malloc0(s->modulecount * 32 * sizeof(qemu_irq));
+    qdev_init_gpio_in(dev, omap2_gpio_set, s->modulecount * 32);
+    qdev_init_gpio_out(dev, s->handler, s->modulecount * 32);
+    for (i = 0; i < s->modulecount; i++) {
+        struct omap2_gpio_s *m = &s->modules[i];
+        if (!s->fclk[i]) {
+            hw_error("omap2-gpio: fclk%d not connected\n", i);
+        }
+        m->revision = (s->mpu_model < omap3430) ? 0x18 : 0x25;
+        m->handler = &s->handler[i * 32];
+        sysbus_init_irq(sbd, &m->irq[0]); /* mpu irq */
+        sysbus_init_irq(sbd, &m->irq[1]); /* dsp irq */
+        sysbus_init_irq(sbd, &m->wkup);
+        memory_region_init_io(&m->iomem, OBJECT(s), &omap2_gpio_module_ops, m,
+                              "omap.gpio-module", 0x1000);
+        sysbus_init_mmio(sbd, &m->iomem);
+    }
+    return 0;
+}
+
+/* Using qdev pointer properties for the clocks is not ideal.
+ * qdev should support a generic means of defining a 'port' with
+ * an arbitrary interface for connecting two devices. Then we
+ * could reframe the omap clock API in terms of clock ports,
+ * and get some type safety. For now the best qdev provides is
+ * passing an arbitrary pointer.
+ * (It's not possible to pass in the string which is the clock
+ * name, because this device does not have the necessary information
+ * (ie the struct omap_mpu_state_s*) to do the clockname to pointer
+ * translation.)
+ */
+
+static Property omap_gpio_properties[] = {
+    DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0),
+    DEFINE_PROP_PTR("clk", struct omap_gpif_s, clk),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap_gpio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = omap_gpio_init;
+    dc->reset = omap_gpif_reset;
+    dc->props = omap_gpio_properties;
+    /* Reason: pointer property "clk" */
+    dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo omap_gpio_info = {
+    .name          = TYPE_OMAP1_GPIO,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(struct omap_gpif_s),
+    .class_init    = omap_gpio_class_init,
+};
+
+static Property omap2_gpio_properties[] = {
+    DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0),
+    DEFINE_PROP_PTR("iclk", struct omap2_gpif_s, iclk),
+    DEFINE_PROP_PTR("fclk0", struct omap2_gpif_s, fclk[0]),
+    DEFINE_PROP_PTR("fclk1", struct omap2_gpif_s, fclk[1]),
+    DEFINE_PROP_PTR("fclk2", struct omap2_gpif_s, fclk[2]),
+    DEFINE_PROP_PTR("fclk3", struct omap2_gpif_s, fclk[3]),
+    DEFINE_PROP_PTR("fclk4", struct omap2_gpif_s, fclk[4]),
+    DEFINE_PROP_PTR("fclk5", struct omap2_gpif_s, fclk[5]),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void omap2_gpio_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = omap2_gpio_init;
+    dc->reset = omap2_gpif_reset;
+    dc->props = omap2_gpio_properties;
+    /* Reason: pointer properties "iclk", "fclk0", ..., "fclk5" */
+    dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo omap2_gpio_info = {
+    .name          = TYPE_OMAP2_GPIO,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(struct omap2_gpif_s),
+    .class_init    = omap2_gpio_class_init,
+};
+
+static void omap_gpio_register_types(void)
+{
+    type_register_static(&omap_gpio_info);
+    type_register_static(&omap2_gpio_info);
+}
+
+type_init(omap_gpio_register_types)