Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 255 insertions, 0 deletions

diff --git a/qemu/hw/char/etraxfs_ser.c b/qemu/hw/char/etraxfs_ser.c
new file mode 100644
index 000000000..857c13621
--- /dev/null
+++ b/qemu/hw/char/etraxfs_ser.c
@@ -0,0 +1,255 @@
+/*
+ * QEMU ETRAX System Emulator
+ *
+ * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/sysbus.h"
+#include "sysemu/char.h"
+#include "qemu/log.h"
+
+#define D(x)
+
+#define RW_TR_CTRL     (0x00 / 4)
+#define RW_TR_DMA_EN   (0x04 / 4)
+#define RW_REC_CTRL    (0x08 / 4)
+#define RW_DOUT        (0x1c / 4)
+#define RS_STAT_DIN    (0x20 / 4)
+#define R_STAT_DIN     (0x24 / 4)
+#define RW_INTR_MASK   (0x2c / 4)
+#define RW_ACK_INTR    (0x30 / 4)
+#define R_INTR         (0x34 / 4)
+#define R_MASKED_INTR  (0x38 / 4)
+#define R_MAX          (0x3c / 4)
+
+#define STAT_DAV     16
+#define STAT_TR_IDLE 22
+#define STAT_TR_RDY  24
+
+#define TYPE_ETRAX_FS_SERIAL "etraxfs,serial"
+#define ETRAX_SERIAL(obj) \
+    OBJECT_CHECK(ETRAXSerial, (obj), TYPE_ETRAX_FS_SERIAL)
+
+typedef struct ETRAXSerial {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+    CharDriverState *chr;
+    qemu_irq irq;
+
+    int pending_tx;
+
+    uint8_t rx_fifo[16];
+    unsigned int rx_fifo_pos;
+    unsigned int rx_fifo_len;
+
+    /* Control registers.  */
+    uint32_t regs[R_MAX];
+} ETRAXSerial;
+
+static void ser_update_irq(ETRAXSerial *s)
+{
+
+    if (s->rx_fifo_len) {
+        s->regs[R_INTR] |= 8;
+    } else {
+        s->regs[R_INTR] &= ~8;
+    }
+
+    s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK];
+    qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]);
+}
+
+static uint64_t
+ser_read(void *opaque, hwaddr addr, unsigned int size)
+{
+    ETRAXSerial *s = opaque;
+    uint32_t r = 0;
+
+    addr >>= 2;
+    switch (addr)
+    {
+        case R_STAT_DIN:
+            r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
+            if (s->rx_fifo_len) {
+                r |= 1 << STAT_DAV;
+            }
+            r |= 1 << STAT_TR_RDY;
+            r |= 1 << STAT_TR_IDLE;
+            break;
+        case RS_STAT_DIN:
+            r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
+            if (s->rx_fifo_len) {
+                r |= 1 << STAT_DAV;
+                s->rx_fifo_len--;
+            }
+            r |= 1 << STAT_TR_RDY;
+            r |= 1 << STAT_TR_IDLE;
+            break;
+        default:
+            r = s->regs[addr];
+            D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r));
+            break;
+    }
+    return r;
+}
+
+static void
+ser_write(void *opaque, hwaddr addr,
+          uint64_t val64, unsigned int size)
+{
+    ETRAXSerial *s = opaque;
+    uint32_t value = val64;
+    unsigned char ch = val64;
+
+    D(qemu_log("%s " TARGET_FMT_plx "=%x\n",  __func__, addr, value));
+    addr >>= 2;
+    switch (addr)
+    {
+        case RW_DOUT:
+            qemu_chr_fe_write(s->chr, &ch, 1);
+            s->regs[R_INTR] |= 3;
+            s->pending_tx = 1;
+            s->regs[addr] = value;
+            break;
+        case RW_ACK_INTR:
+            if (s->pending_tx) {
+                value &= ~1;
+                s->pending_tx = 0;
+                D(qemu_log("fixedup value=%x r_intr=%x\n",
+                           value, s->regs[R_INTR]));
+            }
+            s->regs[addr] = value;
+            s->regs[R_INTR] &= ~value;
+            D(printf("r_intr=%x\n", s->regs[R_INTR]));
+            break;
+        default:
+            s->regs[addr] = value;
+            break;
+    }
+    ser_update_irq(s);
+}
+
+static const MemoryRegionOps ser_ops = {
+    .read = ser_read,
+    .write = ser_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void serial_receive(void *opaque, const uint8_t *buf, int size)
+{
+    ETRAXSerial *s = opaque;
+    int i;
+
+    /* Got a byte.  */
+    if (s->rx_fifo_len >= 16) {
+        qemu_log("WARNING: UART dropped char.\n");
+        return;
+    }
+
+    for (i = 0; i < size; i++) { 
+        s->rx_fifo[s->rx_fifo_pos] = buf[i];
+        s->rx_fifo_pos++;
+        s->rx_fifo_pos &= 15;
+        s->rx_fifo_len++;
+    }
+
+    ser_update_irq(s);
+}
+
+static int serial_can_receive(void *opaque)
+{
+    ETRAXSerial *s = opaque;
+    int r;
+
+    /* Is the receiver enabled?  */
+    if (!(s->regs[RW_REC_CTRL] & (1 << 3))) {
+        return 0;
+    }
+
+    r = sizeof(s->rx_fifo) - s->rx_fifo_len;
+    return r;
+}
+
+static void serial_event(void *opaque, int event)
+{
+
+}
+
+static void etraxfs_ser_reset(DeviceState *d)
+{
+    ETRAXSerial *s = ETRAX_SERIAL(d);
+
+    /* transmitter begins ready and idle.  */
+    s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY);
+    s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE);
+
+    s->regs[RW_REC_CTRL] = 0x10000;
+
+}
+
+static int etraxfs_ser_init(SysBusDevice *dev)
+{
+    ETRAXSerial *s = ETRAX_SERIAL(dev);
+
+    sysbus_init_irq(dev, &s->irq);
+    memory_region_init_io(&s->mmio, OBJECT(s), &ser_ops, s,
+                          "etraxfs-serial", R_MAX * 4);
+    sysbus_init_mmio(dev, &s->mmio);
+
+    /* FIXME use a qdev chardev prop instead of qemu_char_get_next_serial() */
+    s->chr = qemu_char_get_next_serial();
+    if (s->chr) {
+        qemu_chr_add_handlers(s->chr,
+                              serial_can_receive, serial_receive,
+                              serial_event, s);
+    }
+    return 0;
+}
+
+static void etraxfs_ser_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = etraxfs_ser_init;
+    dc->reset = etraxfs_ser_reset;
+    /* Reason: init() method uses qemu_char_get_next_serial() */
+    dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo etraxfs_ser_info = {
+    .name          = TYPE_ETRAX_FS_SERIAL,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(ETRAXSerial),
+    .class_init    = etraxfs_ser_class_init,
+};
+
+static void etraxfs_serial_register_types(void)
+{
+    type_register_static(&etraxfs_ser_info);
+}
+
+type_init(etraxfs_serial_register_types)