diff options
author | 2016-06-03 03:33:22 +0000 | |
---|---|---|
committer | 2016-06-03 03:33:23 +0000 | |
commit | da27230f80795d0028333713f036d44c53cb0e68 (patch) | |
tree | b3d379eaf000adf72b36cb01cdf4d79c3e3f064c /qemu/hw/char/bcm2835_aux.c | |
parent | 0e68cb048bb8aadb14675f5d4286d8ab2fc35449 (diff) | |
parent | 437fd90c0250dee670290f9b714253671a990160 (diff) |
Merge "These changes are the raw update to qemu-2.6."
Diffstat (limited to 'qemu/hw/char/bcm2835_aux.c')
-rw-r--r-- | qemu/hw/char/bcm2835_aux.c | 316 |
1 files changed, 316 insertions, 0 deletions
diff --git a/qemu/hw/char/bcm2835_aux.c b/qemu/hw/char/bcm2835_aux.c new file mode 100644 index 000000000..0394d11a8 --- /dev/null +++ b/qemu/hw/char/bcm2835_aux.c @@ -0,0 +1,316 @@ +/* + * BCM2835 (Raspberry Pi / Pi 2) Aux block (mini UART and SPI). + * Copyright (c) 2015, Microsoft + * Written by Andrew Baumann + * Based on pl011.c, copyright terms below: + * + * Arm PrimeCell PL011 UART + * + * Copyright (c) 2006 CodeSourcery. + * Written by Paul Brook + * + * This code is licensed under the GPL. + * + * At present only the core UART functions (data path for tx/rx) are + * implemented. The following features/registers are unimplemented: + * - Line/modem control + * - Scratch register + * - Extra control + * - Baudrate + * - SPI interfaces + */ + +#include "qemu/osdep.h" +#include "hw/char/bcm2835_aux.h" + +#define AUX_IRQ 0x0 +#define AUX_ENABLES 0x4 +#define AUX_MU_IO_REG 0x40 +#define AUX_MU_IER_REG 0x44 +#define AUX_MU_IIR_REG 0x48 +#define AUX_MU_LCR_REG 0x4c +#define AUX_MU_MCR_REG 0x50 +#define AUX_MU_LSR_REG 0x54 +#define AUX_MU_MSR_REG 0x58 +#define AUX_MU_SCRATCH 0x5c +#define AUX_MU_CNTL_REG 0x60 +#define AUX_MU_STAT_REG 0x64 +#define AUX_MU_BAUD_REG 0x68 + +/* bits in IER/IIR registers */ +#define TX_INT 0x1 +#define RX_INT 0x2 + +static void bcm2835_aux_update(BCM2835AuxState *s) +{ + /* signal an interrupt if either: + * 1. rx interrupt is enabled and we have a non-empty rx fifo, or + * 2. the tx interrupt is enabled (since we instantly drain the tx fifo) + */ + s->iir = 0; + if ((s->ier & RX_INT) && s->read_count != 0) { + s->iir |= RX_INT; + } + if (s->ier & TX_INT) { + s->iir |= TX_INT; + } + qemu_set_irq(s->irq, s->iir != 0); +} + +static uint64_t bcm2835_aux_read(void *opaque, hwaddr offset, unsigned size) +{ + BCM2835AuxState *s = opaque; + uint32_t c, res; + + switch (offset) { + case AUX_IRQ: + return s->iir != 0; + + case AUX_ENABLES: + return 1; /* mini UART permanently enabled */ + + case AUX_MU_IO_REG: + /* "DLAB bit set means access baudrate register" is NYI */ + c = s->read_fifo[s->read_pos]; + if (s->read_count > 0) { + s->read_count--; + if (++s->read_pos == BCM2835_AUX_RX_FIFO_LEN) { + s->read_pos = 0; + } + } + if (s->chr) { + qemu_chr_accept_input(s->chr); + } + bcm2835_aux_update(s); + return c; + + case AUX_MU_IER_REG: + /* "DLAB bit set means access baudrate register" is NYI */ + return 0xc0 | s->ier; /* FIFO enables always read 1 */ + + case AUX_MU_IIR_REG: + res = 0xc0; /* FIFO enables */ + /* The spec is unclear on what happens when both tx and rx + * interrupts are active, besides that this cannot occur. At + * present, we choose to prioritise the rx interrupt, since + * the tx fifo is always empty. */ + if (s->read_count != 0) { + res |= 0x4; + } else { + res |= 0x2; + } + if (s->iir == 0) { + res |= 0x1; + } + return res; + + case AUX_MU_LCR_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_LCR_REG unsupported\n", __func__); + return 0; + + case AUX_MU_MCR_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MCR_REG unsupported\n", __func__); + return 0; + + case AUX_MU_LSR_REG: + res = 0x60; /* tx idle, empty */ + if (s->read_count != 0) { + res |= 0x1; + } + return res; + + case AUX_MU_MSR_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MSR_REG unsupported\n", __func__); + return 0; + + case AUX_MU_SCRATCH: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_SCRATCH unsupported\n", __func__); + return 0; + + case AUX_MU_CNTL_REG: + return 0x3; /* tx, rx enabled */ + + case AUX_MU_STAT_REG: + res = 0x30e; /* space in the output buffer, empty tx fifo, idle tx/rx */ + if (s->read_count > 0) { + res |= 0x1; /* data in input buffer */ + assert(s->read_count < BCM2835_AUX_RX_FIFO_LEN); + res |= ((uint32_t)s->read_count) << 16; /* rx fifo fill level */ + } + return res; + + case AUX_MU_BAUD_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_BAUD_REG unsupported\n", __func__); + return 0; + + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + return 0; + } +} + +static void bcm2835_aux_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + BCM2835AuxState *s = opaque; + unsigned char ch; + + switch (offset) { + case AUX_ENABLES: + if (value != 1) { + qemu_log_mask(LOG_UNIMP, "%s: unsupported attempt to enable SPI " + "or disable UART\n", __func__); + } + break; + + case AUX_MU_IO_REG: + /* "DLAB bit set means access baudrate register" is NYI */ + ch = value; + if (s->chr) { + qemu_chr_fe_write(s->chr, &ch, 1); + } + break; + + case AUX_MU_IER_REG: + /* "DLAB bit set means access baudrate register" is NYI */ + s->ier = value & (TX_INT | RX_INT); + bcm2835_aux_update(s); + break; + + case AUX_MU_IIR_REG: + if (value & 0x2) { + s->read_count = 0; + } + break; + + case AUX_MU_LCR_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_LCR_REG unsupported\n", __func__); + break; + + case AUX_MU_MCR_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_MCR_REG unsupported\n", __func__); + break; + + case AUX_MU_SCRATCH: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_SCRATCH unsupported\n", __func__); + break; + + case AUX_MU_CNTL_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_CNTL_REG unsupported\n", __func__); + break; + + case AUX_MU_BAUD_REG: + qemu_log_mask(LOG_UNIMP, "%s: AUX_MU_BAUD_REG unsupported\n", __func__); + break; + + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n", + __func__, offset); + } + + bcm2835_aux_update(s); +} + +static int bcm2835_aux_can_receive(void *opaque) +{ + BCM2835AuxState *s = opaque; + + return s->read_count < BCM2835_AUX_RX_FIFO_LEN; +} + +static void bcm2835_aux_put_fifo(void *opaque, uint8_t value) +{ + BCM2835AuxState *s = opaque; + int slot; + + slot = s->read_pos + s->read_count; + if (slot >= BCM2835_AUX_RX_FIFO_LEN) { + slot -= BCM2835_AUX_RX_FIFO_LEN; + } + s->read_fifo[slot] = value; + s->read_count++; + if (s->read_count == BCM2835_AUX_RX_FIFO_LEN) { + /* buffer full */ + } + bcm2835_aux_update(s); +} + +static void bcm2835_aux_receive(void *opaque, const uint8_t *buf, int size) +{ + bcm2835_aux_put_fifo(opaque, *buf); +} + +static const MemoryRegionOps bcm2835_aux_ops = { + .read = bcm2835_aux_read, + .write = bcm2835_aux_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static const VMStateDescription vmstate_bcm2835_aux = { + .name = TYPE_BCM2835_AUX, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(read_fifo, BCM2835AuxState, + BCM2835_AUX_RX_FIFO_LEN), + VMSTATE_UINT8(read_pos, BCM2835AuxState), + VMSTATE_UINT8(read_count, BCM2835AuxState), + VMSTATE_UINT8(ier, BCM2835AuxState), + VMSTATE_UINT8(iir, BCM2835AuxState), + VMSTATE_END_OF_LIST() + } +}; + +static void bcm2835_aux_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + BCM2835AuxState *s = BCM2835_AUX(obj); + + memory_region_init_io(&s->iomem, OBJECT(s), &bcm2835_aux_ops, s, + TYPE_BCM2835_AUX, 0x100); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + +static void bcm2835_aux_realize(DeviceState *dev, Error **errp) +{ + BCM2835AuxState *s = BCM2835_AUX(dev); + + if (s->chr) { + qemu_chr_add_handlers(s->chr, bcm2835_aux_can_receive, + bcm2835_aux_receive, NULL, s); + } +} + +static Property bcm2835_aux_props[] = { + DEFINE_PROP_CHR("chardev", BCM2835AuxState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void bcm2835_aux_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + + dc->realize = bcm2835_aux_realize; + dc->vmsd = &vmstate_bcm2835_aux; + set_bit(DEVICE_CATEGORY_INPUT, dc->categories); + dc->props = bcm2835_aux_props; +} + +static const TypeInfo bcm2835_aux_info = { + .name = TYPE_BCM2835_AUX, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(BCM2835AuxState), + .instance_init = bcm2835_aux_init, + .class_init = bcm2835_aux_class_init, +}; + +static void bcm2835_aux_register_types(void) +{ + type_register_static(&bcm2835_aux_info); +} + +type_init(bcm2835_aux_register_types) |