Add qemu 2.4.0

Change-Id: Ic99cbad4b61f8b127b7dc74d04576c0bcbaaf4f5
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>

1 files changed, 848 insertions, 0 deletions

diff --git a/qemu/hw/block/onenand.c b/qemu/hw/block/onenand.c
new file mode 100644
index 000000000..1b2c89375
--- /dev/null
+++ b/qemu/hw/block/onenand.c
@@ -0,0 +1,848 @@
+/*
+ * OneNAND flash memories emulation.
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Written by Andrzej Zaborowski <andrew@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu-common.h"
+#include "hw/hw.h"
+#include "hw/block/flash.h"
+#include "hw/irq.h"
+#include "sysemu/block-backend.h"
+#include "sysemu/blockdev.h"
+#include "exec/memory.h"
+#include "exec/address-spaces.h"
+#include "hw/sysbus.h"
+#include "qemu/error-report.h"
+
+/* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
+#define PAGE_SHIFT	11
+
+/* Fixed */
+#define BLOCK_SHIFT	(PAGE_SHIFT + 6)
+
+#define TYPE_ONE_NAND "onenand"
+#define ONE_NAND(obj) OBJECT_CHECK(OneNANDState, (obj), TYPE_ONE_NAND)
+
+typedef struct OneNANDState {
+    SysBusDevice parent_obj;
+
+    struct {
+        uint16_t man;
+        uint16_t dev;
+        uint16_t ver;
+    } id;
+    int shift;
+    hwaddr base;
+    qemu_irq intr;
+    qemu_irq rdy;
+    BlockBackend *blk;
+    BlockBackend *blk_cur;
+    uint8_t *image;
+    uint8_t *otp;
+    uint8_t *current;
+    MemoryRegion ram;
+    MemoryRegion mapped_ram;
+    uint8_t current_direction;
+    uint8_t *boot[2];
+    uint8_t *data[2][2];
+    MemoryRegion iomem;
+    MemoryRegion container;
+    int cycle;
+    int otpmode;
+
+    uint16_t addr[8];
+    uint16_t unladdr[8];
+    int bufaddr;
+    int count;
+    uint16_t command;
+    uint16_t config[2];
+    uint16_t status;
+    uint16_t intstatus;
+    uint16_t wpstatus;
+
+    ECCState ecc;
+
+    int density_mask;
+    int secs;
+    int secs_cur;
+    int blocks;
+    uint8_t *blockwp;
+} OneNANDState;
+
+enum {
+    ONEN_BUF_BLOCK = 0,
+    ONEN_BUF_BLOCK2 = 1,
+    ONEN_BUF_DEST_BLOCK = 2,
+    ONEN_BUF_DEST_PAGE = 3,
+    ONEN_BUF_PAGE = 7,
+};
+
+enum {
+    ONEN_ERR_CMD = 1 << 10,
+    ONEN_ERR_ERASE = 1 << 11,
+    ONEN_ERR_PROG = 1 << 12,
+    ONEN_ERR_LOAD = 1 << 13,
+};
+
+enum {
+    ONEN_INT_RESET = 1 << 4,
+    ONEN_INT_ERASE = 1 << 5,
+    ONEN_INT_PROG = 1 << 6,
+    ONEN_INT_LOAD = 1 << 7,
+    ONEN_INT = 1 << 15,
+};
+
+enum {
+    ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
+    ONEN_LOCK_LOCKED = 1 << 1,
+    ONEN_LOCK_UNLOCKED = 1 << 2,
+};
+
+static void onenand_mem_setup(OneNANDState *s)
+{
+    /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
+     * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
+     * write boot commands.  Also take note of the BWPS bit.  */
+    memory_region_init(&s->container, OBJECT(s), "onenand",
+                       0x10000 << s->shift);
+    memory_region_add_subregion(&s->container, 0, &s->iomem);
+    memory_region_init_alias(&s->mapped_ram, OBJECT(s), "onenand-mapped-ram",
+                             &s->ram, 0x0200 << s->shift,
+                             0xbe00 << s->shift);
+    memory_region_add_subregion_overlap(&s->container,
+                                        0x0200 << s->shift,
+                                        &s->mapped_ram,
+                                        1);
+}
+
+static void onenand_intr_update(OneNANDState *s)
+{
+    qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
+}
+
+static void onenand_pre_save(void *opaque)
+{
+    OneNANDState *s = opaque;
+    if (s->current == s->otp) {
+        s->current_direction = 1;
+    } else if (s->current == s->image) {
+        s->current_direction = 2;
+    } else {
+        s->current_direction = 0;
+    }
+}
+
+static int onenand_post_load(void *opaque, int version_id)
+{
+    OneNANDState *s = opaque;
+    switch (s->current_direction) {
+    case 0:
+        break;
+    case 1:
+        s->current = s->otp;
+        break;
+    case 2:
+        s->current = s->image;
+        break;
+    default:
+        return -1;
+    }
+    onenand_intr_update(s);
+    return 0;
+}
+
+static const VMStateDescription vmstate_onenand = {
+    .name = "onenand",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .pre_save = onenand_pre_save,
+    .post_load = onenand_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(current_direction, OneNANDState),
+        VMSTATE_INT32(cycle, OneNANDState),
+        VMSTATE_INT32(otpmode, OneNANDState),
+        VMSTATE_UINT16_ARRAY(addr, OneNANDState, 8),
+        VMSTATE_UINT16_ARRAY(unladdr, OneNANDState, 8),
+        VMSTATE_INT32(bufaddr, OneNANDState),
+        VMSTATE_INT32(count, OneNANDState),
+        VMSTATE_UINT16(command, OneNANDState),
+        VMSTATE_UINT16_ARRAY(config, OneNANDState, 2),
+        VMSTATE_UINT16(status, OneNANDState),
+        VMSTATE_UINT16(intstatus, OneNANDState),
+        VMSTATE_UINT16(wpstatus, OneNANDState),
+        VMSTATE_INT32(secs_cur, OneNANDState),
+        VMSTATE_PARTIAL_VBUFFER(blockwp, OneNANDState, blocks),
+        VMSTATE_UINT8(ecc.cp, OneNANDState),
+        VMSTATE_UINT16_ARRAY(ecc.lp, OneNANDState, 2),
+        VMSTATE_UINT16(ecc.count, OneNANDState),
+        VMSTATE_BUFFER_POINTER_UNSAFE(otp, OneNANDState, 0,
+            ((64 + 2) << PAGE_SHIFT)),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+/* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
+static void onenand_reset(OneNANDState *s, int cold)
+{
+    memset(&s->addr, 0, sizeof(s->addr));
+    s->command = 0;
+    s->count = 1;
+    s->bufaddr = 0;
+    s->config[0] = 0x40c0;
+    s->config[1] = 0x0000;
+    onenand_intr_update(s);
+    qemu_irq_raise(s->rdy);
+    s->status = 0x0000;
+    s->intstatus = cold ? 0x8080 : 0x8010;
+    s->unladdr[0] = 0;
+    s->unladdr[1] = 0;
+    s->wpstatus = 0x0002;
+    s->cycle = 0;
+    s->otpmode = 0;
+    s->blk_cur = s->blk;
+    s->current = s->image;
+    s->secs_cur = s->secs;
+
+    if (cold) {
+        /* Lock the whole flash */
+        memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
+
+        if (s->blk_cur && blk_read(s->blk_cur, 0, s->boot[0], 8) < 0) {
+            hw_error("%s: Loading the BootRAM failed.\n", __func__);
+        }
+    }
+}
+
+static void onenand_system_reset(DeviceState *dev)
+{
+    OneNANDState *s = ONE_NAND(dev);
+
+    onenand_reset(s, 1);
+}
+
+static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
+                void *dest)
+{
+    if (s->blk_cur) {
+        return blk_read(s->blk_cur, sec, dest, secn) < 0;
+    } else if (sec + secn > s->secs_cur) {
+        return 1;
+    }
+
+    memcpy(dest, s->current + (sec << 9), secn << 9);
+
+    return 0;
+}
+
+static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
+                void *src)
+{
+    int result = 0;
+
+    if (secn > 0) {
+        uint32_t size = (uint32_t)secn * 512;
+        const uint8_t *sp = (const uint8_t *)src;
+        uint8_t *dp = 0;
+        if (s->blk_cur) {
+            dp = g_malloc(size);
+            if (!dp || blk_read(s->blk_cur, sec, dp, secn) < 0) {
+                result = 1;
+            }
+        } else {
+            if (sec + secn > s->secs_cur) {
+                result = 1;
+            } else {
+                dp = (uint8_t *)s->current + (sec << 9);
+            }
+        }
+        if (!result) {
+            uint32_t i;
+            for (i = 0; i < size; i++) {
+                dp[i] &= sp[i];
+            }
+            if (s->blk_cur) {
+                result = blk_write(s->blk_cur, sec, dp, secn) < 0;
+            }
+        }
+        if (dp && s->blk_cur) {
+            g_free(dp);
+        }
+    }
+
+    return result;
+}
+
+static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
+                void *dest)
+{
+    uint8_t buf[512];
+
+    if (s->blk_cur) {
+        if (blk_read(s->blk_cur, s->secs_cur + (sec >> 5), buf, 1) < 0) {
+            return 1;
+        }
+        memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
+    } else if (sec + secn > s->secs_cur) {
+        return 1;
+    } else {
+        memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
+    }
+ 
+    return 0;
+}
+
+static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
+                void *src)
+{
+    int result = 0;
+    if (secn > 0) {
+        const uint8_t *sp = (const uint8_t *)src;
+        uint8_t *dp = 0, *dpp = 0;
+        if (s->blk_cur) {
+            dp = g_malloc(512);
+            if (!dp
+                || blk_read(s->blk_cur, s->secs_cur + (sec >> 5), dp, 1) < 0) {
+                result = 1;
+            } else {
+                dpp = dp + ((sec & 31) << 4);
+            }
+        } else {
+            if (sec + secn > s->secs_cur) {
+                result = 1;
+            } else {
+                dpp = s->current + (s->secs_cur << 9) + (sec << 4);
+            }
+        }
+        if (!result) {
+            uint32_t i;
+            for (i = 0; i < (secn << 4); i++) {
+                dpp[i] &= sp[i];
+            }
+            if (s->blk_cur) {
+                result = blk_write(s->blk_cur, s->secs_cur + (sec >> 5),
+                                   dp, 1) < 0;
+            }
+        }
+        g_free(dp);
+    }
+    return result;
+}
+
+static inline int onenand_erase(OneNANDState *s, int sec, int num)
+{
+    uint8_t *blankbuf, *tmpbuf;
+
+    blankbuf = g_malloc(512);
+    tmpbuf = g_malloc(512);
+    memset(blankbuf, 0xff, 512);
+    for (; num > 0; num--, sec++) {
+        if (s->blk_cur) {
+            int erasesec = s->secs_cur + (sec >> 5);
+            if (blk_write(s->blk_cur, sec, blankbuf, 1) < 0) {
+                goto fail;
+            }
+            if (blk_read(s->blk_cur, erasesec, tmpbuf, 1) < 0) {
+                goto fail;
+            }
+            memcpy(tmpbuf + ((sec & 31) << 4), blankbuf, 1 << 4);
+            if (blk_write(s->blk_cur, erasesec, tmpbuf, 1) < 0) {
+                goto fail;
+            }
+        } else {
+            if (sec + 1 > s->secs_cur) {
+                goto fail;
+            }
+            memcpy(s->current + (sec << 9), blankbuf, 512);
+            memcpy(s->current + (s->secs_cur << 9) + (sec << 4),
+                   blankbuf, 1 << 4);
+        }
+    }
+
+    g_free(tmpbuf);
+    g_free(blankbuf);
+    return 0;
+
+fail:
+    g_free(tmpbuf);
+    g_free(blankbuf);
+    return 1;
+}
+
+static void onenand_command(OneNANDState *s)
+{
+    int b;
+    int sec;
+    void *buf;
+#define SETADDR(block, page)			\
+    sec = (s->addr[page] & 3) +			\
+            ((((s->addr[page] >> 2) & 0x3f) +	\
+              (((s->addr[block] & 0xfff) |	\
+                (s->addr[block] >> 15 ?		\
+                 s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
+#define SETBUF_M()				\
+    buf = (s->bufaddr & 8) ?			\
+            s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0];	\
+    buf += (s->bufaddr & 3) << 9;
+#define SETBUF_S()				\
+    buf = (s->bufaddr & 8) ?			\
+            s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1];	\
+    buf += (s->bufaddr & 3) << 4;
+
+    switch (s->command) {
+    case 0x00:	/* Load single/multiple sector data unit into buffer */
+        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+        SETBUF_M()
+        if (onenand_load_main(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+#if 0
+        SETBUF_S()
+        if (onenand_load_spare(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+#endif
+
+        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+         * then we need two split the read/write into two chunks.
+         */
+        s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+        break;
+    case 0x13:	/* Load single/multiple spare sector into buffer */
+        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+        SETBUF_S()
+        if (onenand_load_spare(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
+
+        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+         * then we need two split the read/write into two chunks.
+         */
+        s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
+        break;
+    case 0x80:	/* Program single/multiple sector data unit from buffer */
+        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+        SETBUF_M()
+        if (onenand_prog_main(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+#if 0
+        SETBUF_S()
+        if (onenand_prog_spare(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+#endif
+
+        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+         * then we need two split the read/write into two chunks.
+         */
+        s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+        break;
+    case 0x1a:	/* Program single/multiple spare area sector from buffer */
+        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+
+        SETBUF_S()
+        if (onenand_prog_spare(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+        /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
+         * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
+         * then we need two split the read/write into two chunks.
+         */
+        s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+        break;
+    case 0x1b:	/* Copy-back program */
+        SETBUF_S()
+
+        SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+        if (onenand_load_main(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+        SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
+        if (onenand_prog_main(s, sec, s->count, buf))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
+
+        /* TODO: spare areas */
+
+        s->intstatus |= ONEN_INT | ONEN_INT_PROG;
+        break;
+
+    case 0x23:	/* Unlock NAND array block(s) */
+        s->intstatus |= ONEN_INT;
+
+        /* XXX the previous (?) area should be locked automatically */
+        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+            if (b >= s->blocks) {
+                s->status |= ONEN_ERR_CMD;
+                break;
+            }
+            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+                break;
+
+            s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
+        }
+        break;
+    case 0x27:	/* Unlock All NAND array blocks */
+        s->intstatus |= ONEN_INT;
+
+        for (b = 0; b < s->blocks; b ++) {
+            if (b >= s->blocks) {
+                s->status |= ONEN_ERR_CMD;
+                break;
+            }
+            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+                break;
+
+            s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
+        }
+        break;
+
+    case 0x2a:	/* Lock NAND array block(s) */
+        s->intstatus |= ONEN_INT;
+
+        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+            if (b >= s->blocks) {
+                s->status |= ONEN_ERR_CMD;
+                break;
+            }
+            if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
+                break;
+
+            s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
+        }
+        break;
+    case 0x2c:	/* Lock-tight NAND array block(s) */
+        s->intstatus |= ONEN_INT;
+
+        for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
+            if (b >= s->blocks) {
+                s->status |= ONEN_ERR_CMD;
+                break;
+            }
+            if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
+                continue;
+
+            s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
+        }
+        break;
+
+    case 0x71:	/* Erase-Verify-Read */
+        s->intstatus |= ONEN_INT;
+        break;
+    case 0x95:	/* Multi-block erase */
+        qemu_irq_pulse(s->intr);
+        /* Fall through.  */
+    case 0x94:	/* Block erase */
+        sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
+                        (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
+                << (BLOCK_SHIFT - 9);
+        if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
+            s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
+
+        s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+        break;
+    case 0xb0:	/* Erase suspend */
+        break;
+    case 0x30:	/* Erase resume */
+        s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
+        break;
+
+    case 0xf0:	/* Reset NAND Flash core */
+        onenand_reset(s, 0);
+        break;
+    case 0xf3:	/* Reset OneNAND */
+        onenand_reset(s, 0);
+        break;
+
+    case 0x65:	/* OTP Access */
+        s->intstatus |= ONEN_INT;
+        s->blk_cur = NULL;
+        s->current = s->otp;
+        s->secs_cur = 1 << (BLOCK_SHIFT - 9);
+        s->addr[ONEN_BUF_BLOCK] = 0;
+        s->otpmode = 1;
+        break;
+
+    default:
+        s->status |= ONEN_ERR_CMD;
+        s->intstatus |= ONEN_INT;
+        fprintf(stderr, "%s: unknown OneNAND command %x\n",
+                        __func__, s->command);
+    }
+
+    onenand_intr_update(s);
+}
+
+static uint64_t onenand_read(void *opaque, hwaddr addr,
+                             unsigned size)
+{
+    OneNANDState *s = (OneNANDState *) opaque;
+    int offset = addr >> s->shift;
+
+    switch (offset) {
+    case 0x0000 ... 0xc000:
+        return lduw_le_p(s->boot[0] + addr);
+
+    case 0xf000:	/* Manufacturer ID */
+        return s->id.man;
+    case 0xf001:	/* Device ID */
+        return s->id.dev;
+    case 0xf002:	/* Version ID */
+        return s->id.ver;
+    /* TODO: get the following values from a real chip!  */
+    case 0xf003:	/* Data Buffer size */
+        return 1 << PAGE_SHIFT;
+    case 0xf004:	/* Boot Buffer size */
+        return 0x200;
+    case 0xf005:	/* Amount of buffers */
+        return 1 | (2 << 8);
+    case 0xf006:	/* Technology */
+        return 0;
+
+    case 0xf100 ... 0xf107:	/* Start addresses */
+        return s->addr[offset - 0xf100];
+
+    case 0xf200:	/* Start buffer */
+        return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
+
+    case 0xf220:	/* Command */
+        return s->command;
+    case 0xf221:	/* System Configuration 1 */
+        return s->config[0] & 0xffe0;
+    case 0xf222:	/* System Configuration 2 */
+        return s->config[1];
+
+    case 0xf240:	/* Controller Status */
+        return s->status;
+    case 0xf241:	/* Interrupt */
+        return s->intstatus;
+    case 0xf24c:	/* Unlock Start Block Address */
+        return s->unladdr[0];
+    case 0xf24d:	/* Unlock End Block Address */
+        return s->unladdr[1];
+    case 0xf24e:	/* Write Protection Status */
+        return s->wpstatus;
+
+    case 0xff00:	/* ECC Status */
+        return 0x00;
+    case 0xff01:	/* ECC Result of main area data */
+    case 0xff02:	/* ECC Result of spare area data */
+    case 0xff03:	/* ECC Result of main area data */
+    case 0xff04:	/* ECC Result of spare area data */
+        hw_error("%s: imeplement ECC\n", __FUNCTION__);
+        return 0x0000;
+    }
+
+    fprintf(stderr, "%s: unknown OneNAND register %x\n",
+                    __FUNCTION__, offset);
+    return 0;
+}
+
+static void onenand_write(void *opaque, hwaddr addr,
+                          uint64_t value, unsigned size)
+{
+    OneNANDState *s = (OneNANDState *) opaque;
+    int offset = addr >> s->shift;
+    int sec;
+
+    switch (offset) {
+    case 0x0000 ... 0x01ff:
+    case 0x8000 ... 0x800f:
+        if (s->cycle) {
+            s->cycle = 0;
+
+            if (value == 0x0000) {
+                SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
+                onenand_load_main(s, sec,
+                                1 << (PAGE_SHIFT - 9), s->data[0][0]);
+                s->addr[ONEN_BUF_PAGE] += 4;
+                s->addr[ONEN_BUF_PAGE] &= 0xff;
+            }
+            break;
+        }
+
+        switch (value) {
+        case 0x00f0:	/* Reset OneNAND */
+            onenand_reset(s, 0);
+            break;
+
+        case 0x00e0:	/* Load Data into Buffer */
+            s->cycle = 1;
+            break;
+
+        case 0x0090:	/* Read Identification Data */
+            memset(s->boot[0], 0, 3 << s->shift);
+            s->boot[0][0 << s->shift] = s->id.man & 0xff;
+            s->boot[0][1 << s->shift] = s->id.dev & 0xff;
+            s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
+            break;
+
+        default:
+            fprintf(stderr, "%s: unknown OneNAND boot command %"PRIx64"\n",
+                            __FUNCTION__, value);
+        }
+        break;
+
+    case 0xf100 ... 0xf107:	/* Start addresses */
+        s->addr[offset - 0xf100] = value;
+        break;
+
+    case 0xf200:	/* Start buffer */
+        s->bufaddr = (value >> 8) & 0xf;
+        if (PAGE_SHIFT == 11)
+            s->count = (value & 3) ?: 4;
+        else if (PAGE_SHIFT == 10)
+            s->count = (value & 1) ?: 2;
+        break;
+
+    case 0xf220:	/* Command */
+        if (s->intstatus & (1 << 15))
+            break;
+        s->command = value;
+        onenand_command(s);
+        break;
+    case 0xf221:	/* System Configuration 1 */
+        s->config[0] = value;
+        onenand_intr_update(s);
+        qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
+        break;
+    case 0xf222:	/* System Configuration 2 */
+        s->config[1] = value;
+        break;
+
+    case 0xf241:	/* Interrupt */
+        s->intstatus &= value;
+        if ((1 << 15) & ~s->intstatus)
+            s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
+                            ONEN_ERR_PROG | ONEN_ERR_LOAD);
+        onenand_intr_update(s);
+        break;
+    case 0xf24c:	/* Unlock Start Block Address */
+        s->unladdr[0] = value & (s->blocks - 1);
+        /* For some reason we have to set the end address to by default
+         * be same as start because the software forgets to write anything
+         * in there.  */
+        s->unladdr[1] = value & (s->blocks - 1);
+        break;
+    case 0xf24d:	/* Unlock End Block Address */
+        s->unladdr[1] = value & (s->blocks - 1);
+        break;
+
+    default:
+        fprintf(stderr, "%s: unknown OneNAND register %x\n",
+                        __FUNCTION__, offset);
+    }
+}
+
+static const MemoryRegionOps onenand_ops = {
+    .read = onenand_read,
+    .write = onenand_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static int onenand_initfn(SysBusDevice *sbd)
+{
+    DeviceState *dev = DEVICE(sbd);
+    OneNANDState *s = ONE_NAND(dev);
+    uint32_t size = 1 << (24 + ((s->id.dev >> 4) & 7));
+    void *ram;
+
+    s->base = (hwaddr)-1;
+    s->rdy = NULL;
+    s->blocks = size >> BLOCK_SHIFT;
+    s->secs = size >> 9;
+    s->blockwp = g_malloc(s->blocks);
+    s->density_mask = (s->id.dev & 0x08)
+        ? (1 << (6 + ((s->id.dev >> 4) & 7))) : 0;
+    memory_region_init_io(&s->iomem, OBJECT(s), &onenand_ops, s, "onenand",
+                          0x10000 << s->shift);
+    if (!s->blk) {
+        s->image = memset(g_malloc(size + (size >> 5)),
+                          0xff, size + (size >> 5));
+    } else {
+        if (blk_is_read_only(s->blk)) {
+            error_report("Can't use a read-only drive");
+            return -1;
+        }
+        s->blk_cur = s->blk;
+    }
+    s->otp = memset(g_malloc((64 + 2) << PAGE_SHIFT),
+                    0xff, (64 + 2) << PAGE_SHIFT);
+    memory_region_init_ram(&s->ram, OBJECT(s), "onenand.ram",
+                           0xc000 << s->shift, &error_abort);
+    vmstate_register_ram_global(&s->ram);
+    ram = memory_region_get_ram_ptr(&s->ram);
+    s->boot[0] = ram + (0x0000 << s->shift);
+    s->boot[1] = ram + (0x8000 << s->shift);
+    s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
+    s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
+    s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
+    s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
+    onenand_mem_setup(s);
+    sysbus_init_irq(sbd, &s->intr);
+    sysbus_init_mmio(sbd, &s->container);
+    vmstate_register(dev,
+                     ((s->shift & 0x7f) << 24)
+                     | ((s->id.man & 0xff) << 16)
+                     | ((s->id.dev & 0xff) << 8)
+                     | (s->id.ver & 0xff),
+                     &vmstate_onenand, s);
+    return 0;
+}
+
+static Property onenand_properties[] = {
+    DEFINE_PROP_UINT16("manufacturer_id", OneNANDState, id.man, 0),
+    DEFINE_PROP_UINT16("device_id", OneNANDState, id.dev, 0),
+    DEFINE_PROP_UINT16("version_id", OneNANDState, id.ver, 0),
+    DEFINE_PROP_INT32("shift", OneNANDState, shift, 0),
+    DEFINE_PROP_DRIVE("drive", OneNANDState, blk),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void onenand_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = onenand_initfn;
+    dc->reset = onenand_system_reset;
+    dc->props = onenand_properties;
+}
+
+static const TypeInfo onenand_info = {
+    .name          = TYPE_ONE_NAND,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(OneNANDState),
+    .class_init    = onenand_class_init,
+};
+
+static void onenand_register_types(void)
+{
+    type_register_static(&onenand_info);
+}
+
+void *onenand_raw_otp(DeviceState *onenand_device)
+{
+    OneNANDState *s = ONE_NAND(onenand_device);
+
+    return s->otp;
+}
+
+type_init(onenand_register_types)