Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 199 deletions

diff --git a/qemu/hw/arm/mainstone.c b/qemu/hw/arm/mainstone.c
deleted file mode 100644
index 454acc5d2..000000000
--- a/qemu/hw/arm/mainstone.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * PXA270-based Intel Mainstone platforms.
- *
- * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
- *                                    <akuster@mvista.com>
- *
- * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "hw/hw.h"
-#include "hw/arm/pxa.h"
-#include "hw/arm/arm.h"
-#include "net/net.h"
-#include "hw/devices.h"
-#include "hw/boards.h"
-#include "hw/block/flash.h"
-#include "sysemu/block-backend.h"
-#include "hw/sysbus.h"
-#include "exec/address-spaces.h"
-#include "sysemu/qtest.h"
-
-/* Device addresses */
-#define MST_FPGA_PHYS	0x08000000
-#define MST_ETH_PHYS	0x10000300
-#define MST_FLASH_0		0x00000000
-#define MST_FLASH_1		0x04000000
-
-/* IRQ definitions */
-#define MMC_IRQ       0
-#define USIM_IRQ      1
-#define USBC_IRQ      2
-#define ETHERNET_IRQ  3
-#define AC97_IRQ      4
-#define PEN_IRQ       5
-#define MSINS_IRQ     6
-#define EXBRD_IRQ     7
-#define S0_CD_IRQ     9
-#define S0_STSCHG_IRQ 10
-#define S0_IRQ        11
-#define S1_CD_IRQ     13
-#define S1_STSCHG_IRQ 14
-#define S1_IRQ        15
-
-static const struct keymap map[0xE0] = {
-    [0 ... 0xDF] = { -1, -1 },
-    [0x1e] = {0,0}, /* a */
-    [0x30] = {0,1}, /* b */
-    [0x2e] = {0,2}, /* c */
-    [0x20] = {0,3}, /* d */
-    [0x12] = {0,4}, /* e */
-    [0x21] = {0,5}, /* f */
-    [0x22] = {1,0}, /* g */
-    [0x23] = {1,1}, /* h */
-    [0x17] = {1,2}, /* i */
-    [0x24] = {1,3}, /* j */
-    [0x25] = {1,4}, /* k */
-    [0x26] = {1,5}, /* l */
-    [0x32] = {2,0}, /* m */
-    [0x31] = {2,1}, /* n */
-    [0x18] = {2,2}, /* o */
-    [0x19] = {2,3}, /* p */
-    [0x10] = {2,4}, /* q */
-    [0x13] = {2,5}, /* r */
-    [0x1f] = {3,0}, /* s */
-    [0x14] = {3,1}, /* t */
-    [0x16] = {3,2}, /* u */
-    [0x2f] = {3,3}, /* v */
-    [0x11] = {3,4}, /* w */
-    [0x2d] = {3,5}, /* x */
-    [0x15] = {4,2}, /* y */
-    [0x2c] = {4,3}, /* z */
-    [0xc7] = {5,0}, /* Home */
-    [0x2a] = {5,1}, /* shift */
-    /*
-     * There are two matrix positions which map to space,
-     * but QEMU can only use one of them for the reverse
-     * mapping, so simply use the second one.
-     */
-    /* [0x39] = {5,2}, space */
-    [0x39] = {5,3}, /* space */
-    /*
-     * Matrix position {5,4} and other keys are missing here.
-     * TODO: Compare with Linux code and test real hardware.
-     */
-    [0x1c] = {5,5}, /* enter (TODO: might be wrong) */
-    [0xc8] = {6,0}, /* up */
-    [0xd0] = {6,1}, /* down */
-    [0xcb] = {6,2}, /* left */
-    [0xcd] = {6,3}, /* right */
-};
-
-enum mainstone_model_e { mainstone };
-
-#define MAINSTONE_RAM	0x04000000
-#define MAINSTONE_ROM	0x00800000
-#define MAINSTONE_FLASH	0x02000000
-
-static struct arm_boot_info mainstone_binfo = {
-    .loader_start = PXA2XX_SDRAM_BASE,
-    .ram_size = 0x04000000,
-};
-
-static void mainstone_common_init(MemoryRegion *address_space_mem,
-                                  MachineState *machine,
-                                  enum mainstone_model_e model, int arm_id)
-{
-    uint32_t sector_len = 256 * 1024;
-    hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
-    PXA2xxState *mpu;
-    DeviceState *mst_irq;
-    DriveInfo *dinfo;
-    int i;
-    int be;
-    MemoryRegion *rom = g_new(MemoryRegion, 1);
-    const char *cpu_model = machine->cpu_model;
-
-    if (!cpu_model)
-        cpu_model = "pxa270-c5";
-
-    /* Setup CPU & memory */
-    mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model);
-    memory_region_init_ram(rom, NULL, "mainstone.rom", MAINSTONE_ROM,
-                           &error_fatal);
-    vmstate_register_ram_global(rom);
-    memory_region_set_readonly(rom, true);
-    memory_region_add_subregion(address_space_mem, 0, rom);
-
-#ifdef TARGET_WORDS_BIGENDIAN
-    be = 1;
-#else
-    be = 0;
-#endif
-    /* There are two 32MiB flash devices on the board */
-    for (i = 0; i < 2; i ++) {
-        dinfo = drive_get(IF_PFLASH, 0, i);
-        if (!dinfo) {
-            if (qtest_enabled()) {
-                break;
-            }
-            fprintf(stderr, "Two flash images must be given with the "
-                    "'pflash' parameter\n");
-            exit(1);
-        }
-
-        if (!pflash_cfi01_register(mainstone_flash_base[i], NULL,
-                                   i ? "mainstone.flash1" : "mainstone.flash0",
-                                   MAINSTONE_FLASH,
-                                   blk_by_legacy_dinfo(dinfo),
-                                   sector_len, MAINSTONE_FLASH / sector_len,
-                                   4, 0, 0, 0, 0, be)) {
-            fprintf(stderr, "qemu: Error registering flash memory.\n");
-            exit(1);
-        }
-    }
-
-    mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
-                    qdev_get_gpio_in(mpu->gpio, 0));
-
-    /* setup keypad */
-    pxa27x_register_keypad(mpu->kp, map, 0xe0);
-
-    /* MMC/SD host */
-    pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
-
-    pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0],
-            qdev_get_gpio_in(mst_irq, S0_IRQ),
-            qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
-    pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1],
-            qdev_get_gpio_in(mst_irq, S1_IRQ),
-            qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
-
-    smc91c111_init(&nd_table[0], MST_ETH_PHYS,
-                    qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
-
-    mainstone_binfo.kernel_filename = machine->kernel_filename;
-    mainstone_binfo.kernel_cmdline = machine->kernel_cmdline;
-    mainstone_binfo.initrd_filename = machine->initrd_filename;
-    mainstone_binfo.board_id = arm_id;
-    arm_load_kernel(mpu->cpu, &mainstone_binfo);
-}
-
-static void mainstone_init(MachineState *machine)
-{
-    mainstone_common_init(get_system_memory(), machine, mainstone, 0x196);
-}
-
-static void mainstone2_machine_init(MachineClass *mc)
-{
-    mc->desc = "Mainstone II (PXA27x)";
-    mc->init = mainstone_init;
-}
-
-DEFINE_MACHINE("mainstone", mainstone2_machine_init)